GrEAT PACIFIC ELBOW COMPANY PRODUC T C ATALOG

GrEAT PACIFIC ELBOW COMPANY PRODUC T C ATALOG Setting the Standard for Premium HVAC Products since 1983

ABOUT US Great Pacific Elbow began in 1983, initially only offering adjustable elbows. Our expertise and high commitment to quality over the years has led to a full selection of sheet metal offerings, all bearing the same attention to service, quality, and value our customers have grown to enjoy. Today, Great Pacific Elbow continues with its established tradition of service and care. Our customers receive the same level of reliability and consistent satisfaction that we have strived to maintain over the years. Customer Service Great Pacific Elbow offers an unmatched level of customer service. Our customer service team has over 50 years of combined experience, and can answer just about any question our customers might have or will find the answer quickly. Shipping & Delivery Great Pacific Elbow maintains a fleet of company owned trucks to service our distributors throughout the Western US, and we employ our own friendly drivers that are happy to help unload. See the last page of this catalog for more shipping information. Superior Quality After safety, quality is the number one priority in our factory. We employ experienced sheet metal workers that take pride in their work, and pay close attention to the quality of the products we sell. We offer a complete line of sealed fittings, and continually look for new ways to improve the quality of our products. What Sets Us Apart? Line Item Labeling All of our products are individually labeled with our part number and description, and we also label the outside of palletized material or boxes with mixed product with the Purchase Order Number, part number and description, and quantity in the pallet or box. Low FFA Minimums At the end of this catalog is a delivery schedule with FFA amounts, lead times, and other pertinent information. Great Customer Service we confirm every order within a few hours of receipt with complete and accurate pricing and delivery information, and have an experienced staff to answer questions. We will call with approximate delivery times the day before your delivery. Total Seal Fittings Job Quotes / Custom Items we are happy to provide competitive quotes for large jobs, and help our customers become a one stop shop by offering custom items. Total Seal / Zulu Mat both of these products are exclusive to Great Pacific Elbow Union Made Products Representation We have Manufacturers Representatives with years of sheet metal experience covering all of the regions we ship to.

ROUND PIPE Conductor Pipe Vent Pipe AVAILABLE IN 10 LENGTHS AVAILABLE IN 30 LENGTHS 1100 Conductor Pipe - 10 1101 Vent Pipe - 30 Aluminum Flex KD Pipe AVAILABLE IN 3 And 5 Lengths AVAILABLE IN 6 to 10 Lengths 1102 KD Pipe - 3 1103 KD Pipe - 5 2601 Bare w/ Collars - 6 2602 Bare w/ Collars - 7.5 2603 No Collars, Compressed 2614 No Collars, Uncompressed 2604 R4.2 Wrap - 6 2606 R4.2 Wrap - 7.5 2605 R6.0 Wrap - 7.5 2608 R8.0 Wrap - 6 Spiral Pipe AVAILABLE IN 7.5 And 10 Lengths 2700 2704 2706 2707 2708 2720 Spiral Pipe - Crimped One End Spiral Pipe - Raw/Raw Spiral Pipe - R4.2 Wrap Spiral Pipe - R6.0 Wrap Spiral Pipe - R8.0 Wrap Spiral Pipe - Stainless Steel GPE Focuses on Quality We are constantly striving to find new ways to improve quality and value. Elbows & Angles 90º Elbow 45º Elbow 1201 Adjustable 1203 Adjustable - Long Radius 1221 Adjustable - Stainless Steel 1205 Spotwelded - Long Radius 1200 Adjustable - Donut Package (Turned) 1202 Adjustable - Long Radius 1210 Adjustable - Straight Package 1220 Adjustable - Stainless Steel 1206 Spotwelded - Long Radius Wyes & Tees Tee Wyes True Tee 1300 Standard (45 Deg Branch) 1305 Sealed 1310 Jiffy Damper Installed 1313 1.5 Standoff Heavy Duty Damper Installed 1320 Stainless Steel Dual Wye 1301 Standard (90 Deg Branch) 1341 Sealed Splitter Wye 1302 Standard (45 Deg Branches) 1309 Sealed 1303 Standard 1360 Sealed

Wyes & Tees Dual Branch True Tee Reverse Flow 1308 Dual Branch True Tee 1306 Tee Wye (Crimp on Bottom - MxFxF) Pant Wye 1307 True Tee (Crimp on Bottom - MxFxF) 1361 45/45 ROUND CONNECTORS / CAPS Sheet Metal Spin-Ins 1900 1901 1902 1903 Round End Cap SM Spin-In SM Spin-In w/ Scoop SM Spin-In w/ Damper SM Spin-In w/ Scoop & Damper 2291 Round End Cap (Male - Undersized) 2301 Round End Cap - Standard (Female - No Crimp) Duct Connector Start Collars 2000 Start Collar - Standard (5 Long) 2001 Duct Board Start Collar Airtite Collar 2060 Airtite Collar 2061 Aitite Collar w/ Damper Dampers & Sleeves Volume Damper 2002 Duct Connector Packaging Makes a Difference Great Pacific Elbow labels all products with the item number and description. Boxes and pallets have Line Item Labels to clearly show their contents. Damper Disk 1500 Jiffy Hardware 1510 Volume Damper - 1.5 Standoff - Hdwe 1501 Jiffy Hardware 1502 Bare Reducers & Tapers Short Taper Sure Fit Taper 1400 Short Taper Flue Reducer / Flue Bushing 2295 Flue Reducer / Flue Bushing 1403 Standard - Crimp on Small End 1404 Increaser - Crimp on Large End 1407 No Crimp Cookie Cutter 2299 Crimp on Large End 2300 Crimp on Small End

Saddle Taps Rectangular Saddle Tap 45 Saddle Tap 2200 On Round (Non Specific Radius) 2202 On Flat 2204 On Round (On Specific Radius) 2103 Flange In 2104 Flange Out 90 Saddle Tap 2201 On Round (Non Specific Radius) 2203 On Flat 2205 On Round (On Specific Radius) BOOTS & BOXES PH1 Can t find the product you are looking for? Give us a call! We have the capability of making a wide variety of sheet metal products. PH2 1701 No PG 1704 w/ PG 1711 No PG - Sealed 1714 - w/ PG - Sealed PH3 1702 1705 1712 1715 No PG w/ PG No PG - Sealed w/ PG - Sealed Floor Box 1703 1706 1713 1716 No PG w/ PG No PG - Sealed w/ PG - Sealed Concrete Box 1801 Floor Box 1812 Floor Box - 3 Deep, Sealed 1821 Floor Box - Sealed RNA (Round Neck Adapter) 1720 Slant Back (PH2B) 1730 Straight Back (PH2A) Ceiling Box 1803 RNA 1834 RNA Cap B-Box 1804 4 Deep w/ PG 1814 4 Deep w/ PG - Sealed Side Tap Ceiling Box 1805 Height is Collar plus 2, w/ PG 1815 - Height is Collar plus 2, w/ PG - Sealed RETURN AIR Return Air Can (RAC) 1800 1806 1825 1816 4 Deep 6 Deep 4 Deep - Sealed 6 Deep - Sealed 1841 w/ Ears - Sealed 1842 w/ 1/2 Flange - Sealed 1843 w/ PG - Sealed

Introducing Total Seal Fittings Reduce Duct System Leakage by up to 15%! Installing Zulu Mat Register Seals or Total Seal Fittings Improves: Energy Savings Indoor Air Quality Odor Control Humidity Control Without Zulu Mat Zulu Mat installed US Pat. Pending 2013-0180204-A1 With today s building codes focusing on greater energy efficiency and reducing duct system leakage, Zulu Mat is the most cost effective way to eliminate air leakage between the sheet metal register can and drywall. Installed between the air register and drywall, Zulu Mat seals the space between the drywall and sheet metal can, eliminating any air leakage of conditioned air into the unconditioned spaces.

Register / Riser Fittings Straight Boot Stackhead Boot 1600 Straight Boot 1603 Straight Boot - Sealed Cone Boot 1601 Stackhead Boot 1604 Stackhead Boot - Sealed Riser 45 1602 Cone Boot 1605 Cone Boot - Sealed Fan Boot 2100 Riser 45 - Std 2110 Riser 45 - Flat Register Box 1610 Fan Boot Riser 90 1802 Register Box Riser Pipe 2101 Riser 90 2111 Riser 90 - Flat 2112 Riser End Cap 2102 Riser Pipe Circle Lined Products Tee Wye 3 KD Pipe 2500 1 Circle Liner Adj 90º Elbow 2501 1 Circle Liner Adj 45º Angle 2502 1 Circle Liner Spiral Pipe 2503 1 Circle Liner Coated fiberglass 2701 1 Circle Liner The fiberglass liner used in our Circle Lined products is coated to keep fiberglass intact.

Vent Products Dryer Vent Base Vent 2302 2312 2320 2321 2322 w/ Flange & Damper 1 Stucco & Damper 10 Dryer Vent Riser Adjustable Dryer Vent Riser Vertical (Rooftop) Dryer Vent Eyebrow 2303 Louver w/ Screen 2403 Louver w/ Screen - Bonderized 2323 w/ Screen (No Louver) Wall Cap 2304 2306 2314 2316 Flange & Screen 1 Stucco & Screen Flange - Screen & Damper 1 Stucco, Screen & Damper Eave Vent 2305 Flange & Screen 2315 1 Stucco & Screen 2340 Rect Wall Cap Combustion Air Can 2325 Eave Vent 2343 Combustion Air Can Plenums & Drain Pans Plenums Drain Pan 2801 Cap & Flange - Bare 2811 Cap & Flange - 1/2 Liner 2812 Cap - Bare 2821 Cap & Flange - 1 Liner 2813 Raw & Flange (No Cap) 2803 Fitting on Short Side (Standard) 2804 Fitting on Long Side Flashings Cooler Flashing Storm Collar 2805 Cooler Flashing - Flat 2815 Cooler Flashing - Pitched 2817 Cooler Flashing - Adjustable Pitch Conductor Flashing 2901 Conductor Flashing 2932 Storm Collar China Cap 2900 China Cap

Flashings Pipe Flashing T-Top 2908 2940 2941 2945 2946 2950 2951 2955 2956 2960 2961 Sub Flashing Std, Base Flashing Galv, SW Std, Base Flashing Galv, DW Std, Base Flashing, SW Std, Base Flashing, DW FHA, Base Flashing Galv, SW FHA, Base Flashing Galv, DW FHA, Base Flashing, SW FHA, Base Flashing, DW FHA, Base Flashing DSA, SW FHA, Base Flashing DSA, DW Miscellaneous FAU Stand 2905 2911 2912 2915 2916 2917 T-Top (Standard) T-Top (DSA Alum Base) T-Top w/ Screen T-Top (New Style - Galv) T-Top (New Style - Zinc) T-Top (New Style - Alum) Other Items Available: Rectangular Duct & Fittings Roof Curbs Custom Items Stainless Steel Aluminum Bonderized Standing S Material 3005 FAU Stand Drive Stock 3100 Standing S Material 1 Pc Line Set Cover 3101 Drive Stock S Lock 3102 1 Pc Line Set Cover PG Material 3103 S Lock Hanger Strap 3104 PG Material Hanger Iron 3201 Rolls, With or Without Holes 3202 10 Lengths Angle Material 3203 Hanger Iron Filter Base 3205 10 Lengths Flat Stock 3206 Filter Base STEELCO U.S.A. 6200 Flat Stock Our sister company, Steelco U.S.A., specializes in Flat Stock, Coils and Slit Coils. check out: www.steelcousa.com

GREAT PACIFIC Roofing Roofing Company Dormer Gable Louver 3410 Half Round, Galv 3411 Half Round, Zincalume 3412 Half Round, DSA Base - Galv 3413 Half Round, DSA Base Zincalume Scupper 3420 Rect Top, Galv 3421 Rect Top, Zincalume 3425 Round Top, Galv 3426 Round Top, Zincalume 3428 Round, Galv 3429 Round, Zincalume Leader Head 3440 Scupper W-Valley 3445 Leader Head Gravel Stop 3520 W-Valley, Galv 3521 W-Valley, Zincalume L-Metal 3525 Galv 3526 Zincalume Roof to Wall Flashing 3540 Galv 3541 Zincalume Drip Edge 3545 Galv 3546 Zincalume Roll Valley 3550 Galv 3551 Zincalume 3560 Galv 3561 Zincalume

Ordering and Shipping Information Great Pacific Elbow is able to reduce minimum delivery amounts qualifying for free freight by scheduling our trucks to different areas on each day of the week. Below is a list of regions with the cities we deliver to, with normal delivery days and FFA amounts. Region Cities Delivery Days FFA Amount Los Angeles LA, SGV, South Bay Mon, Thur $750 San Fernando Valley Tues, Fri $750 Orange County All Every Day $750 Riverside County All Every Day $750 San Bernardino Indio, Palm Desert, Palm Springs, San Bernardino Monday $750 San Diego El Cajon, San Diego, Escondido Thursday $750 Central Valley Bakersfield, Fresno, Visalia Thursday $1,500 Central Coast Oxnard, Paso Robles, San Luis Obispo, Santa Barbara, Santa Maria Wednesday $1,500 Bay Area Oakland, San Francisco, San Jose Tues, Fri $1,500 Sacramento Modesto, Sacramento, Stockton Tues, Fri $2,000 Arizona Phoenix Valley Mon, Wed, Fri $2,000 Tucson / Yuma Mon, Wed, Fri $3,000 Las Vegas Henderson, Las Vegas Call GPE Call GPE Less than Minimum? Give us a call depending on how much below the FFA amount your order is, we may charge a modest delivery fee. Jobsite Deliveries / Direct Shipments? We are happy to drop ship for you - the above FFA amounts apply to jobsite deliveries and direct shipments. Pricing is never included on our shipping documents. We will call the day prior to delivery to notify of a shipping time window. We do request accurate addresses (or maps) and contact information at the time of order to ensure timely deliveries. Will Calls? Feel free to will call at our facility; we just need a few hours to process and pull your order for in-stock items and we ll have it ready for you. For non stock items, we ll let you know a date and time for pickup. Add-Ons? Add-ons are welcome up to two days before your delivery date! We can even add items that are available from our stock up until the morning before your delivery. Confirmations? Every order is confirmed via email or fax within a day of receipt. Purchase order number, pricing, delivery date, ship to and other pertinent information is included on our Sales Order Confirmation. LEAD TIME Our standard lead time for normal stock orders is 4 working days to the right is a chart showing when to have orders in to ensure complete deliveries. Special order items or unusually large orders may require additional lead time. Order by 3PM Tuesday Wednesday Thursday Friday Monday Receive Delivery Monday Tuesday Wednesday Thursday Friday

Setting the Standard for Premium HVAC Products since 1983 GrEAT PACIFIC ELBOW COMPANY 15044 La Palma Drive Chino, CA 91710 phone: 909.606.5551 fax: 909.606.5559 web: www.greatpacificelbow.com