Fabricated Drainage Products
|
|
|
- Jeffrey Blaze McCoy
- 8 years ago
- Views:
Transcription
1 Fabricated Drainage Products
2 Complete Drainage System Inline Drains are used At the beginning of a drain line Add a new water inlet to an existing drain line using a riser pipe and tee HARCO Surface Drainage Structures are the perfect choice for: Drain Basins are used As a junction box when drainage system inlets / outlets change diameter, change pipe type, change elevation, change direction, and allows for multiple inlets or outlets in one structure For a water inlet and sediment collection point entering a drainage system Commercial Developments Schools and Sports Complexes Roadways and Highways Parking lots Government Installations Parks and Recreation Areas Industrial Parks Golf Courses Residential Developments Economical and Durable Construction HARCO surface drainage structures, including drain basins and inline drains, are manufactured from PVC pipe stock utilizing a thermo-molding process to ensure consistent watertight seal throughout the structure body and the outlet stubs. The raw material used to manufacture this PVC pipe stock shall conform to ASTM D1784 cell class These heavy-duty PVC structures are abrasion resistant and virtually immune to most types of corrosion. Inlet / Adapters The outlet stubs for HARCO surface drainage structures are manufactured from PVC pipe stock utilizing a thermo-molding process to ensure a tight pipe-to-structure fit that can meet or exceed the pressure requirements of the ASTM D3212 standard for connections joining drainage pipes utilizing flexible elastomeric seals conforming to ASTM F477. To ensure proper fit, simply specify the exact pipe type / brand to connect to the HARCO structure. HARCO surface drainage structures can provide connections to most pipe types / brands including: Most Corrugated Polyethylene Drainage pipe brands PVC Sewer and drainage pipes Iron C900 & C905 Ribbed & Corrugated PVC Made to Order Every drainage system is different. Whether small or large, your drainage system may require adapting to multiple pipe types and diameters, changes in direction and elevation. HARCO Drain Basins are custombuilt in a timely manner for each individual project, ensuring you can meet the design and timeline requirements for your project. HARCO plastic surface drainage structures should be installed following the same ASTM D2321 installation guidelines accepted for backfill, compaction and installation of plastic drainage pipes.
3 Grates / HARCO Field Tap HARCO grates and covers are designed specifically to fit HARCO surface drainage structures. These castings are manufactured from metal conforming to ASTM A536 grade for ductile iron. HARCO provides a wide selection of ductile iron castings including: Light duty drop-in grates for nontraffic / turf applications designed primarily to fit 6" 30" corrugated polyethylene pipes Light duty domed / beehive grates available in 6" 30" Round H10 rated grate and frame assemblies for parking lots, pedestrian, and medium duty loads (.5 inch vane spacing conforms to ADA requirements) - fits 12" 30" structures (8" and 10" are 1-piece grates that are light duty only) Round H25 rated grate and frame assemblies for traffic or heavy duty applications - fits 12" 36" structures Round H25 rated solid cover and frame assemblies for maintenance access or heavy duty applications fits structures Square hinged H10 and H25 rated grates and frames and Solid covers and frames fit 12" and 15" structures H25 rated 2'x2' square Traffic and Curb Inlet grates, frames, and hood assemblies - fits 12" 30" structures H25 rated 2'x3' rectangular Traffic and Curb Inlet grates, frames, and hood assemblies fits 18" 30" structures Round H-25 Square Hinged H-25 Traffic & Curb H-25 Round H-10 Square Hinged H-10 Curb Diagonal H-25 Round Solid Square Hinged Solid Curb High Flow H-25 HARCO Field Tap The HARCO Field Tap allows you the flexibility to add an inlet or outlet to your HARCO drain basin in-the-field when that unexpected additional line is identified, or if the exact location of that line was not able to be determined prior to basin installation. HARCO Field Taps are available in 4" through 18" diameters. For installation, a drain basin 2 sizes larger than the HARCO Field Tap outlet is required. Examples: 8" HARCO Field Tap requires a 12" basin 12" HARCO Field Tap requires a 18" basin 18" HARCO Field Tap requires a 30" basin Kit Includes: An adhesive-backed cutting template Hole Gasket Bell x spigot adaptor (made to fit pipe you are connecting to) Equipment Needed: Standard drill / bits Jigsaw lubricant
4 Special Use Drainage Structures Snout Drainage Structure The HARCO Snout-equipped Drainage Structure is a custom drain basin with a plastic composite hood attached to the wall of the drain basin covering the outlet. This simple yet effective cover prevents floating debris, oils, and sediment from exiting the basin where it remains trapped and can easily be removed. The placement of the Snout cover over the basin outlet forces water to exit the basin outlet from the clear zone of water below the floating debris or oils, and creates environment conducive for many contaminants and debris to settle to the bottom of the basin as well. The HARCO Snout Drainage Structure represents a costeffective method for the treating and removal of storm water pollutants. Snouts are factory-installed and available for 18", 24", and 30" diameter HARCO drain basins. Weir Plate Outflow/High- Flow Event Inflow Redirect Flow/ First-Flush Outflow Weir Drainage Structure The HARCO Weir-equipped Drainage Structure is a custom drain basin with a stainless steel weir installed at the factory by HARCO, made to customer specifications. Weir Drainage Structures are perfect for diverting water to preferred outlet within a HARCO drain basin, and also to restrict the flow of water. These weir-equipped HARCO drain basins are widely utilized at the entrance and / or the exit of an underground storm water treatment system or an underground storm water retention / detention system. These custom stainless steel weirs are available for 24, 30, and 36 diameter HARCO drain basins. The customer is responsible for determining weir orientation, weir height, and orifice details for each custom weir drainage structure.
5 HARCO Drainage Structures Overall Overall Overall Inline Drains 8" 4" 17" 18" 6" 18" 30" 15" 23" 8" 6" 19" 18" 8" 19" 30" 18" 25" 8" 8" 17" 18" 10" 20" 30" 24" 28" 10" 4" 17" 18" 12" 21" 30" 30" 26" 10" 6" 18" 18" 15" 26" 36" 4" 15" 10" 8" 20" 18" 18" 24" 36" 6" 16" 10" 10" 18" 24" 4" 17" 36" 8" 17" 12" 4" 17" 24" 6" 18" 36" 10" 18" 12" 6" 18" 24" 8" 19" 36" 12" 23" 12" 8" 19" 24" 10" 20" 36" 15" 21" 12" 10" 22" 24" 12" 21" 36" 18" 23" 12" 12" 20" 24" 15" 23" 36" 24" 26" 15" 4" 16" 24" 18" 25" 36" 30" 29" 15" 6" 18" 24" 24" 12" 36" 36" 25" 15" 8" 19" 15" 10" 20" 15" 12" 23" 15" 15" 21" 18" 4" 17" 30" 4" 17" 30" 6" 18" 30" 8" 19" 30" 10" 20" 30" 12" 21" *Dimensions within the table are estimated, actual dimensions will vary. Drain Basins Minimum Sump 8" 4 8" 4" 10" 4 10" 6" 12" 4 12" 6" 15" 4 15" 6" 18" 4 18" 6" 24" 4 24" 8" 30" 4 30" 10" 36" 4 30" 14" can be positioned at any angle subject to verification
6 Drain Basin Curb Inlet Structure Curb Inlet Structure Drainage Structure Order Traffic Structure Form Order Form Or Customer Name: Project Name: Project Location: Basin Location: Customer Name: Traffic Structure Customer Name: Project Name: Project Location: Basin Location: Drain Basin Dia.: Grate Type Grate Style Style Grate Type Round One piece (8" and 10" only) H10 Solid Round Round One piece One piece (8" and (8" 10" and only) 10" only) Round Light w/ frame H10 Duty(12" 36" Solid only) Solid Round Round w/ frame w/ frame (12"-36" (12" 36" only) only) One piece H10 Beehive H10 (8" 30" H25 H25 only) H10 Solid Domed H25 Solid Domed/Beehive One piece Beehive (6"-30")(8" 30" only) Square Domed Hinged Domed (12" and 15" only) Square Square Hinged Hinged (12" and (12" 15" and only) 15" only) Traffic H10 (2X2 H10 Square Grate) H25 H25 H10 Solid Standard H25 Diagonal Solid High Flow Locking Grate? yes Locking Gra no Traffic Traffic (2x2 Square (2X2 Square Grate) Grate) Traffic Standard (2X3 Standard Rectangular Grate) Diagonal High Standard Flow Diagonal High Flow D3212 Water Tight Joint Requir Locking Grate? Yes No Traffic Traffic (2x3 Rectangular (2X3 Rectangular Grate) Grate) Curb Inlet Standard (2x2 Standard Square Grate) Diagonal High Standard Flow Diagonal D3212 Water Tight Joint High Flow Required? yes no Curb Inlet Curb (2x2 Inlet Square (2x2 Square Grate) Grate) Curb Inlet Standard (2x3 Standard Rectangular Diagonal Grate) High Standard Flow D3212 Diagonal Water-Tight-Joint High FlowSpecified? Yes No Curb Inlet Curb (2x3 Inlet Rectangular (2x3 Rectangular Grate) Grate) Standard Standard Diagonal Diagonal High Flow Stub #1 Stub #2 Stub #1 Stub #3 Stub #2 Stub #4 Stub #3 Stub #5 Stub #4 Notes: Stub #5 Notes: Grate Type TOP VIEW Stub Dia Notes: Location (Degrees) Stub #1 Stub #2 Stub #3 Stub #4 Stub #5 TOP VIEW Stub Dia. "B" Invert Customer Approval Min. Rim to Min. Rim to opening height opening height - refer refer to to chart chart for for minimums minimums Customer Approval: Date: Location "B" Invert (Degrees) Type of Drain Basin Project Name: Date: HARCO Quote # Project Location: Basin Location: Drain Basin Dia.: "A" Basin Drain Basin Dia.: Grate Style "A" Basin : Type of Manufacturer Min. Sump "C" and Min. Rim to Opening Min. Sump "C" 8" Basin and 4" 10-18" Basin Min. Rim to 6" Opening Heig 24" Basin 8" Basin 8" 4" 30" Basin 10" 18" Basin10" 6" 36" Basin 24" Basin 14" 8" 30" Basin 10" 36" Basin 14" SIDE VIEW SIDE Min. VIEW Rim to opening height refer to chart for minimums Customer Approval: Date: HARCO Quote # Stub Dia. Location (Degrees) "B" Invert Type of Manufacturer TOP VIEW A - Overall A Overall B - Top of Grate to Invert of B Stub Top of Grate (Flow Line) to Invert of Stub (Flow Line) C - Sump - refer to C Sump refer chart for minimums to chart for minimums *Due to the fact that HARCO Drainage Structures are custom made, they are Non Cancelable and N Distributed by: *Due to the fact that HARCO Drainage Structures are custom made, they are Non Cancelable and Non Returnable HARCO Fittings PO Box Lynchburg, VA Phone (800) Fax(434) s HARCO Fittings PO Box Lynchburg, VA Phone (800) Fax(434) sales@harcofittings.com SIDE VIEW HA "A" Basin H Ma THE HARRINGTON CORPORATION P.O. Box Lynchburg, VA Phone: (434) Fax: (434) customerservice@harcofittings.com PF
Storm Drainage Structures
Storm Drainage Structures Tomorrow s Drainage System Today A DIVISION OF ADVANCED DRAINAGE SYSTEMS, INC. ADVANCED DRAINAGE SYSTEMS, INC. The Preferred Solution for Storm Drainage Applications. About Nyloplast-ADS
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
SECTION 02400 - STORM DRAIN SYSTEM
SECTION 02400 - STORM DRAIN SYSTEM CONTENTS: Part 1 - General... 1 1.01 Work Included... 1 1.02 Related Requirements... 1 1.03 Reference Standards... 1 1.04 Quality Assurance... 1 1.05 Measurement And
SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.
SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION
SECTION 08000 STORM DRAINAGE TABLE OF CONTENTS
SECTION 08000 STORM DRAINAGE 08010 DESIGN A. Location B. Sizing TABLE OF CONTENTS 08020 MATERIALS A. Pipe Materials B. Structure Materials C. Installation D. Inlets and Outlets 08030 INSPECTIONS AND TESTING
PUBLIC WORKS DESIGN, SPECIFICATIONS & PROCEDURES MANUAL LINEAR INFRASTRUCTURE
REGION OF PEEL PUBLIC WORKS DESIGN, SPECIFICATIONS & PROCEDURES MANUAL LINEAR INFRASTRUCTURE Storm Sewer Design Criteria REVISED July 2009 PUBLIC WORKS STORM SEWER DESIGN CRITERIA TABLE OF CONTENTS 1.0
DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 33 UTILITIES 33 00 00 SITE UTILITIES
SECTION INCLUDES Domestic Water Fire Water Service Water Well Sanitary Sewer Storm Drains Foundation Drainage RELATED SECTIONS 03 30 00 Concrete 21 00 00 Fire Suppression - Sprinklers 22 00 00 Plumbing
HDPE PRODUCTS QUALITY, PERFORMANCE AND ECONOMY COMBINED
QUALITY, PERFORMANCE AND ECONOMY COMBINED LANE S HDPE DRAINAGE PIPE Scan for more information on Lane s HDPE product line. Lane provides the complete product line to meet all your HDPE drainage needs -
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
Native InDesign 2890 SaniTite Brochure 1/8" 100 300 CMYK April 17, 07
Sanitary Sewer Pipe Tough pipe for a tough environment SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling, toughness
DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL
DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL 1.01 DESCRIPTION A. Furnish and install all storm drains, including manholes, inlets, service lines and other appurtenant
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
SANITARY SEWER SPECIFICATIONS
SANITARY SEWER SPECIFICATIONS OCTOBER 2003 HARVEST-MONROVIA WATER, SEWER, AND FIRE PROTECTION AUTHORITY SECTION 1.00 1.10 Purpose The purpose of this document is to assemble the sewer specifications, policies,
SECTION 33 41 13 PUBLIC STORM UTILITY DRAINAGE PIPING
SECTION 33 41 13 PUBLIC STORM PART 1 - GENERAL 1.01 SECTION INCLUDES A. Storm drainage piping, fittings, and accessories at proposed station areas and locations other than under and immediately adjacent
SECTION LS 2530 SANITARY SEWERS. A. General: Submit the following in accordance with The General Conditions.
SECTION LS 2530 SANITARY SEWERS PART 1 GENERAL 1.1 SUBMITTALS A. General: Submit the following in accordance with The General Conditions. 1. Product data for drainage piping specialties. 2. Shop drawings
The Most Advanced Name in Drainage Systems. Sanitary Sewer Pipe
The Most Advanced Name in Drainage Systems Sanitary Sewer Pipe SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling,
SECTION 7- STORM SEWER
SECTION 7- STORM SEWER 7.1. STORM SEWERS.... 7-1 7.2. SUMP DRAINS... 7-3 7.3. CATCH BASINS... 7-3 7.4. MANHOLES... 7-4 7.5. STORM SEWER CALCULATIONS... 7-4 7.6. CULVERTS AND BRIDGES... 7-5 7.7. OPEN CHANNELS...
CHAPTER 11 STORM DRAINAGE
CHAPTER STORM DRAINAGE SECTION PC 0 GENERAL 0. Scope. The provisions of this chapter shall govern the materials, design, construction and installation of storm drainage. Storm water discharge shall be
EXHIBIT "A. Technical Specifications for Water and Sewer Service Lines
EXHIBIT "A Technical Specifications for Water and Sewer Service Lines Water and Sewer Line Bedding and Backfill: Drawings show cross-section of trench, pipe laid on top of 6" min. bedding material, bedding
Beacon Hill Sewer District Standard Specifications
Beacon Hill Sewer District Standard Specifications Residential Gravity Side Sewer Including Design Criteria and Standard Construction Drawings Residential Gravity Side Sewer Design Criteria 1. Provisions
STANDARD AND SPECIFICATIONS FOR STORM DRAIN INLET PROTECTION
STANDARD AND SPECIFICATIONS FOR STORM DRAIN INLET PROTECTION Design Criteria Drainage Area The drainage area for storm drain inlets shall not exceed one acre. The crest elevations of these practices shall
Stormwater/Wetland Pond Construction Inspection Checklist
: Construction Inspection ChecklistsTools Stormwater/Wetland Pond Construction Inspection Checklist Project: Location: Site Status: Date: Time: Inspector: SATISFACTORY/ UNSATISFACTORY COMMENTS Pre-Construction/Materials
X Planning X Quality X Maintenance & Operations
Delaware Department of Transportation Division of Transportation Solutions Design Guidance Memorandum Memorandum Number 1-20 Revised 1. Road Design Manual 2. Bridge Design Manual 3. Utilities Design Manual
CHAPTER 17: STORM SEWER STANDARDS. 17.00 Introduction. 17.01 Administration. 17.02 Standards 17.1
CHAPTER 17: STORM SEWER STANDARDS 17.00 Introduction 17.01 Administration 17.02 Standards 17.1 17.00 INTRODUCTION The purpose of this chapter is to provide guidance for the design and construction of storm
Table 4.9 Storm Drain Inlet Protetion Applicable for
BMP C220: Storm Drain Inlet Protection Purpose To prevent coarse sediment from entering drainage systems prior to permanent stabilization of the disturbed area. Conditions of Use Type of Inlet Protection
CLEANOUT FEATURES. KLEENATRON II Features CLEANOUTS
CLEANOUT FEATURES KLEENATRON II Features JOSAM KLEENATRON II Cleanouts incorporate features developed to meet the latest in building construction methods. These features ensure the specifier, installer
SERVICE LINE EXTENSION AND SERVICE LINE CONNECTION CONDENSED SANITARY SEWER SYSTEM INSTALLATION SPECIFICATIONS
1001 SOUTH LEECHBURG HILL LEECHBURG, PA 15656 Phone: 724-845-9355 Fax: 724-845-1186 SERVICE LINE EXTENSION AND SERVICE LINE CONNECTION CONDENSED SANITARY SEWER SYSTEM INSTALLATION SPECIFICATIONS 1. General
Access Hatch Solutions
Access Hatch Solutions Table of Contents Access Hatch Load Ratings 4 Aluminum Access Hatches 8 Ductile Iron Access Hatches 21 Table of Contents Product Description Page Aluminum Access Hatches Access Hatch
SECTION 108 - INLETS 108.1 INLET LOCATIONS
Greene County Design Standards -Adopted April 5, 1999 SECTION 108 - INLETS SECTION 108 - INLETS 108.1 INLET LOCATIONS 108.2 INLET INTERCEPTION CAPACITIES 108.2.1 Clogging Factors 108.3 INTERCEPTION AND
Welcome: What is U Drain? Drain Materials. Flow
Welcome: Thank you for looking into the U Drain floor drain system. This paper will explore the functional features of the U Drain and why it is superior to other grated systems in the marketplace. We
ADS Water Quality Units
ADS Water Quality Units Engineered structures for storm water pollutant removal Water Quality Units Standards for storm water quality will necessarily vary by location and land use. The most targeted sources
INDEX STORM DRAINAGE PRE-APPROVED NOTES, DESIGN CRITERIA, & PLANS
INDEX STORM DRAINAGE POLICIES D-1 NOT USED D-2 Small Project Drainage Review Requirements D-3 Targeted and Full Drainage Review Requirements D-4 Prohibited and Allowed Discharges to the Storm Drainage
Note: All dimensions are nominal. All weights are for shipping purposes only. Availability is subject to change.
CHANNEL DrAiNS Durable Designed for maximum durability and drainage, NDS Channel Drains are a proven alternative to traditional concrete drains. UV inhibitors in the grates, channel and component parts
STANDARD SPECIFICATIONS FOR STORM SEWER CONSTRUCTION CITY OF PLYMOUTH, MINNESOTA
STANDARD SPECIFICATIONS FOR STORM SEWER CONSTRUCTION CITY OF PLYMOUTH, MINNESOTA MARCH 2014 ENGINEERING DIVISION 3400 PLYMOUTH BLVD. PLYMOUTH, MN USA 55447-1482 TELEPHONE (763) 509-5500 Doran M. Cote,
Access Hatch Solutions. ejco.com 800 626 4653
Access Hatch Solutions ejco.com 800 626 4653 Table of Contents Access Hatch Load Ratings 4 Aluminum Access Hatches 8 Ductile Iron Access Hatches 21 Table of Contents Product Description Page Aluminum Access
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent
LS 2540 SEWER LATERALS AND INSPECTION TEES
LS 2540 SEWER LATERALS AND INSPECTION TEES A. Summary B. Submittals C. Site Information D. Sewer Pipe and Fittings E. Lateral Locations F. Lateral Installation G. Inspection Tee Installation H. Removal
DIVISION 4300 STORM DRAINAGE
DIVISION 4300 STORM DRAINAGE SECTION 4305 STORM SEWER PART 1 - GENERAL 1.01 SCOPE This section covers the construction of storm sewers for the collection and transport of stormwater runoff. 1.02 REFERENCES
FY11 Sanitary Sewer Main Rehab and Point Repair Bid Tabulation
644-10-569 Page 1 of 9 1 FOR CLEANING AND TELEVISING EXISTING SEWERS, AS SPECIFIED, ANY REQUIRED CLEANING, ANY LOCATION, ANY LENGTH OF SEWER, COMPLETE IN PLACE, FOR VARIOUS PIPE DIAMETERS. A. EXISTING
SUMP PUMP. City of Ann Arbor & C O L L E C T I O N S Y S T E M G L O S S A R Y
Foundation A foundation is the bottom part of a building. It s the element that anchors the building to the ground and transmits the building s gravity load directly to the earth. Water damage weakens
SECTION 9.02 BUILDING SUBSURFACE DRAINS (PERIMETER, ETC.)
CHAPTER 9 SEWER / STORM DRAIN / IRRIGATION LINES SECTION 9.01 GENERAL This section covers the requirements for piping materials and installation of Lehi City sewer, storm drainage and irrigation collection
INDEX. Sec. No. Items Page Nos.
INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............
SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE
6.01 SCOPE The work covered by this section of the specifications consists of the furnishing of all plant, labor, materials, equipment and supervision and performing all operations involved in the construction
VDOT 2001 Road and Bridge Standards Section 100 - Drainage Items
VDOT 2001 Road and Bridge s Page Title EW-1 EW-1A 101.01 Endwall for Pipe Culverts 12" - 36" Circular and 23" X 14" - 53" X 34" Elliptical Pipes EW-1PC EW-1APC 101.02 Precast Endwall for Pipe Culverts
SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701)
SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701) 55-1 GENERAL The Contractor shall perform all work required by the plans for construction of pipe for storm drains, precast polymer trench drains
Jay R. Smith Mfg. Co.
Jay R. Smith Mfg. Co. Automatic Backwater Valve SMITH CUSTOMER DRIVEN FLOOD-GATE FEATURES Index Page Flood-Gate Features and Applications 2 How Flood-Gate Works 3 Flood-Gate Operation & Approvals 4 Valve
City of West Linn Public Works Standard Construction Specifications. Table of Contents
City of West Linn Public Works Standard Construction Specifications Table of Contents DIVISION SIX STORM DRAIN TECHNICAL REQUIREMENTS... 1 601 PIPE AND FITTINGS... 1 601.01 Description...1 601.02 Materials...1
The Next Generation in Storm Sewer Inlet Controls
The Next Generation in Storm Sewer Inlet Controls S T O R M W A T E R F L O W C O N T R O L THE COST-EFFECTIVE SOLUTION TO YOUR STORM WATER SURCHARGE PROBLEMS Conserves sewer system capacity System accommodates
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT
SEPTIC SYSTEM CONSTRUCTION REQUIREMENTS ST. MARY S COUNTY HEALTH DEPARTMENT The following are minimum requirements for installation of conventional trench sewage disposal systems in St. Mary s County,
State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS
State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS While its use is not required, this checklist has been prepared to provide the field inspector a summary
CW 2130 - GRAVITY SEWERS TABLE OF CONTENTS
August 2010 CW 2130 - GRAVITY SEWERS TABLE OF CONTENTS 1. DESCRIPTION... 1 1.1 General... 1 1.2 Definitions... 1 1.3 Referenced Standard Construction Specifications... 1 1.4 Referenced Standard Details...
SECTION 6A STORM DRAIN DESIGN Mar. 2002 S E C T I O N 6A STORM DRAIN - DESIGN
S E C T I O N 6A STORM DRAIN - DESIGN 6A.l Scope 6A.2 Storm Water Quantity 6A.3 Storm Drain Hydraulics 6A.4 Depths 6A.5 Locations 6A.6 Curved Storm Drains 6A.7 Manholes 6A.8 Catch basins 6A.9 Storm Drain
CHAPTER 11 STORM DRAINAGE
CHAPTER 11 STORM DRAINAGE SECTION 11 GENERAL 11.1 Scope. The provisions of this chapter shall govern the materials, design, construction and installation of storm drainage. 11.2 Where required. All roofs,
FY08 SEWER POINT REPAIRS BID TABULATION
6-07-831 Page 1 of 12 1 FOR CLEANING AND TELEVISING EXISTING SEWERS, AS SPECIFIED, ANY REQUIRED CLEANING, ANY LOCATION, ANY LENGTH OF SEWER, COMPLETE IN PLACE, FOR VARIOUS PIPE DIAMETERS. A. EXISTING "
TECHNICAL SPECIFICATION GUIDE
EzFLOW gravel FrEE FrENCH DrAiN SySTEM EZflow Gravel Free Drain by NDS are geosynthetic aggregate pipe systems for use in drainage applications. With aggregate manufactured from recycled polystyrene, EZflow
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD channel drainage system Technical Data ACO MultiDrain MD Introduction to the
DRAINAGE MANUAL CHAPTER VII STORM DRAINAGE SYSTEMS
TDOT DESIGN DIVISION DRAINAGE MANUAL CHAPTER VII STORM DRAINAGE SYSTEMS August 1, 2012 CHAPTER 7 STORM DRAINAGE SYSTEMS SECTION 7.01 INTRODUCTION 7.01 INTRODUCTION...7-1 SECTION 7.02 DOCUMENTATION PROCEDURES
3A-1---------------------------------General Information A. Concepts... 1 B. Conditions... 1
Statewide Urban Design and Specifications Table of Contents Design Manual Chapter 3 Sanitary Sewers Table of Contents TOC Chapter 3 Sanitary Sewers 3A General Information 3A-1---------------------------------General
SECTION 16402 UNDERGROUND ELECTRIC SERVICE
SECTION 16402 UNDERGROUND ELECTRIC SERVICE PART 1 GENERAL 1.1 SUMMARY A. Description of System 1. Furnish all labor, materials, and equipment for below grade work external to buildings as required, and
Shower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
PLUMBING ROUGH IN INSPECTION
This Program is made Possible through the Code Officials Education & Training Fund. Revenue for the Fund comes from Assessments on Building Permits. Please turn down cell phones and put pagers on vibrate.
CITY OF ANN ARBOR PUBLIC SERVICES PLAN REVIEW CHECKLIST
CITY OF ANN ARBOR PUBLIC SERVICES PLAN REVIEW CHECKLIST NOTE: The following list shall only be used as a guide and shall not be used in lieu of the specifications found in the CITY OF ANN ARBOR PUBLIC
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES **From Hartford IM BLDG(10) DESCRIPTION. This work shall consist of the construction of air release, cleanout, and sanitary sewer manholes; and the furnishing
DESCRIPTION OF STORMWATER STRUCTURAL CONTROLS IN MS4 PERMITS
DESCRIPTION OF STORMWATER STRUCTURAL CONTROLS IN MS4 PERMITS Phase I MS4 permits require continuous updating of the stormwater system inventory owned and operated by the MS4. They also include inspection
INTERCEPTORS TABLE OF CONTENTS S-WD-INTER-1 0812
TABLE OF CONTENTS Pictorial Index Product Recommendations Grease Interceptors Commonly Specified Options Typical Installations Oil Interceptors Commonly Specified Options Typical Installations Sediment
SECTION 02732 BUILDING SEWERS. B. Connection of building sanitary drainage system to municipal sewers.
SECTION 02732 BUILDING SEWERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Lateral piping, fittings, and accessories. B. Connection of building sanitary drainage system to municipal sewers. 1.02 REGULATORY
GRATES AND DRAINS HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
15-1 CLEANOUT COVERS 47471082 4-11/16 Josam, 3 screw 47471084 6-5/16 Josam, 3 screw 47761070 5-7/16 Smith, 3 screw w/ closure plug 47941108 6-1/4 Wade, 3 screw 47991400 4-5/8 Zurn, 3 screw 47991402 6-1/8
08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
32-02.05 Precast Manhole Sections and Castings. These items shall conform to Section 31, "Storm Drain Installation," of these Standard Provisions.
SECTION 32: SANITARY SEWER INSTALLATION 32-01 SCOPE. The Work shall consist of furnishing and installing sewer mains, manholes, laterals, cleanout fittings and appurtenances; and testing, flushing and
SECTION 02530 STORM DRAINAGE STRUCTURES. 1. Trench excavation, backfill, and compaction; Section 02250.
02530-1 of 5 SECTION 02530 STORM DRAINAGE STRUCTURES 02530.01 GENERAL A. Description Storm drainage structure construction shall include, but not necessarily be limited to, furnishing and installing or
Town House 11265 Center Highway North Huntingdon, PA 15642
APPENDIX C SPECIFICATIONS FOR THE CONSTRUCTION OF BUILDING LATERAL SANITARY SEWERS DECEMBER 2004, INCLUDING AMENDMENTS ADOPTED ON FEBRUARY 6, 2008 AND APRIL 2, 2008; EFFECTIVE ON MAY 1, 2008 Town House
City of West Linn Public Works Design Standards 2010. Table of Contents
City of West Linn Public Works Design Standards Table of Contents SECTION TWO STORM DRAIN REQUIREMENTS... 1 2.0000 STORM DRAINS... 1 2.0010 General Design Requirements...1 2.0011 Site Drainage Plans...2
SECTION 02700 SEWERAGE AND DRAINAGE PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 02700 SEWERAGE AND DRAINAGE PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including the General and Supplementary Conditions and Division 1 Specification
CLEANING, INSPECTION, AND TESTING OF SEWERS
CLEANING, INSPECTION, AND TESTING OF SEWERS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Cleaning, Inspecting, and Testing Sanitary Sewers B. Cleaning, Inspecting, and Testing Storm Sewers C. Cleaning and
Storm Drain Inlet Protection
Categories EC Erosion Control SE Sediment Control TC Tracking Control WE Wind Erosion Control Non-Stormwater NS Management Control Waste Management and WM Materials Pollution Control Legend: Primary Category
Storm Drain Inlet Protection for Construction Sites (1060)
Storm Drain Inlet Protection for Construction Sites (1060) Wisconsin Department of Natural Resources Conservation Practice Standard I. Definition A temporary device installed in or around a storm drain
City of Shelbyville Site Inspection Checklist
City of Shelbyville Site Inspection Checklist General Information Project Name: KYR10 Permit Number: Date: Project Location: Contractor: Conractor Representative: Inspector's Name: Title: Signature : Weather
Index. protection. excavated drop inlet protection (Temporary) 6.50.1 6.51.1. Block and gravel inlet Protection (Temporary) 6.52.1
6 Index inlet protection excavated drop inlet protection (Temporary) 6.50.1 HARDWARE CLOTH AND GRAVEL INLET PROTECTION Block and gravel inlet Protection (Temporary) sod drop inlet protection ROCK DOUGHNUT
CHAPTER 6 - SANITARY SEWER
CHAPTER 6 - SANITARY SEWER 6.1 GENERAL This section covers the requirements for PVC plastic sewer pipe materials and installation in sanitary sewer construction. 6.2 PIPE PVC gravity sewer pipe and fittings
STANDARD SPECIFICATIONS & CONSTRUCTION DETAILS MANUAL SECTION 5 - STORM DRAINAGE. 5.01 Design
SECTION 5 - STORM DRAINAGE 5.01 Design Storm drainage facilities shall be designed in accordance with the goals and guidelines set forth in the Unified Development Ordinance. The goal shall be to collect
FAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW PRICE SCHEDULE 4/1/201 SUPERSEDES 4/1/11 SPILL CONTAINMENT And STREET ACCESS MANHOLES for UNDERGROUND And ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES MONITOR WELL SERIES
SEDIMENT/STORMWATER MANAGEMENT BASIN CONSTRUCTION CHECKLIST
SEDIMENT/STORMWATER MANAGEMENT BASIN CONSTRUCTION CHECKLIST For permanent structures per Delaware SCS Pond Code 378 and Delaware Sediment and Stormwater Regulations KEY PROJECT INFORMATION Item meets standard
ITD Pipe Materials Selection & Specification Procedures. July 2011
ITD Pipe Materials Selection & Specification Procedures July 2011 INTRODUCTION: This technical memorandum is written as a guide to the selection of compliant pipe materials and the elimination of non-compliant
SPECIFICATION FOR PIPE SUBSOIL DRAIN CONSTRUCTION
SPECIFICATION FOR PIPE SUBSOIL DRAIN CONSTRUCTION 1. SCOPE Pipe subsoil drains shall be constructed in accordance with this specification and in conformity with the lines, grades and cross-sections shown
SECTION 15410 GROUND WATER STORAGE TANKS
SECTION 15410 GROUND WATER STORAGE TANKS PART 1 GENERAL.01 SCOPE A. Section Includes Requirements for designing, fabricating, and erecting a welded steel ground storage tank..02 SYSTEM DESCRIPTION A. Design
CHAPTER 5. Storm Sewer
CHAPTER 5 Storm Sewer A. Introduction All proposed developments shall have a properly designed and constructed storm water conveyance system. This chapter deals only with the conveyance system. Storm water
Duraslot Surface Drains
Duraslot Surface Drains Durable, economical, corrosion-resistant collection of surface runoff A sensible alternative to metal and concrete Since 1987, Duraslot surface drains have been providing reliable
Section 2100-Trenching and Tunneling
SECTION 5200 - STORM SEWER PART 1 - GENERAL 1.01 SCOPE: This Section covers installation of storm sewer mains and culverts. Topics include permits and fees, trench widths, pipe laying, bedding, initial
WATER MAIN CONSTRUCTION TECHNIQUES DEPARTMENT OF PUBLIC WORKS WATER & WASTEWATER DIVISION
WATER MAIN CONSTRUCTION TECHNIQUES Overview Water Main - Materials Specifications Installation Future? Water Main Materials Material Types There are various material types used for water mains, these include:
Drainage Products Catalog. March 2011
Drainage Products Catalog March 20 Over 0 years ago, NDS began producing plastic drainage and landscape products. From the beginning, our commitment to quality and innovation has been unwavering, leading
TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe
TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe TN 5.14 February 2010 Introduction It may be at times necessary, in an aging infrastructure, to rehabilitate drainage and sanitary lines
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
How To Drain A Drainline Grating
SECTION 16 ACO Drain Channel Drainage and Landscaping Systems ACO HexDrain Page 240 ACO HexDrain Garage Pack Page 242 ACO HexDrain Brickslot Page 243 ACO RainDrain Page 244 ACO GroundGuard Page 246 ACO
Storm Drain Inlet Protection for Construction Sites (1060)
Storm Drain Inlet Protection for Construction Sites (1060) Wisconsin Department of Natural Resources Conservation Practice Standard I. Definition A temporary device installed in or around a storm drain
Guidelines for Precast Concrete Grease Interceptors
Guidelines for Precast Concrete Grease Interceptors Purpose Provide an overview of the basic design principals that govern why gravity grease interceptors work Provide a forum for discussion of common
Royal Seal Gasketed Sewer Pipe
Royal Seal Gasketed Sewer Pipe Royal Seal Gasketed Sewer Pipe Royal Seal gasketed sewer pipe with our specially designed Double Seal Locked-In (DSLI ) gasket is an extremely durable pipe with a leak proof
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
Sewage Compliance Form Instructions
CITY OF JOHNSTOWN DEPARTMENT OF COMMUNITY & ECONOMIC DEVELOPMENT 401 MAIN STREET ROOM 200 JOHNSTOWN, PA 15901 814-533-2017 FAX 814-539-5816 RENEE K. DALY DIRECTOR Sewage Compliance Form Instructions 1)
SECTION 200: STORM SEWER CONSTRUCTION STANDARDS
SECTION 200: STORM SEWER CONSTRUCTION STANDARDS Page No. Description 200-2 201 GENERAL 200-2 201.1 SPECIFICATIONS 200-2 201.2 CONNECTION TO EXISTING FACILITIES 200-3 202 MATERIALS 200-3 202.1 PIPES 200-4