4 X 1 3/8 X 3/16 CHANNEL 101.6 x 34.9 x 4.8 CHANNEL ALLOWABLE UNIFORM LOADS (lbs./ft. / N/m.) Laterally Supported A w = 0.680 in. 2 / 438.7mm 2 Wt. = 0.88 lbs./ft. / 1.31kg/m. I = 2.62 in. 4 / 1090526mm. 4 S = 1.31 in. 3 / 267mm. 3 SPAN FT/m This item is stocked in 20foot lengths in Standard Polyester (ST) and Polyester Fire Retardant (FR). Other lengths available in mill run quantities. The mill run on this item is 1,000 feet. DEFLECTION MAXIMUM LOAD L/100 L/150 L/180 L/240 L/360 3/0.91 435/6343 F v / / / / 296/4322 4/1.22 244/3562 F v / / / 211/3086 1/2053 5/1.52 156/2275 F b / / 153/2237 115/1675 76/1112 6/1.83 108/1576 F b / / 92/1336 68/999 45/662 7/2.13 79/1154 F b / 71/1029 59/855 44/638 29/421 8/2.44 60/881 F b / 48/695 40/577 29/430 19/282 9/2.74 48/693 F b / 34/490 28/406 21/301 13/196 10/3.05 38/559 F b 37/540 24/356 20/295 15/218 10/1 The part weight has been deducted in the above table. English/ Metric Orders for less than mill run quantities will be subject to set up charges as well as premium per foot cost. 264 Reynoldsdale Road, Bedford, PA 155227401 Phone: 86238125 Sales Fax: 86236032 www.bedfordplastics.com Email: frpsales@bedfordplastics.com 47 6/2007
3 1/2 X 1 1/2 X 3/16 CHANNEL 88.9 x 38.1 x 4.8 CHANNEL ALLOWABLE UNIFORM LOADS (lbs./ft. / N/m.) Major Axis ********Laterally Supported ********** A w (in. 2 /mm. 2 )=0.54 / 348.3 Wt.(lbs./kg/m)=0.86 / 1.28 I(in. 4 /mm. 4 )= 1.92 / 799164 S(in. 3 /mm. 3 )= 1.10 / 18026 SPAN MAXIMUM DEFLECTION FT/m LOAD L/100 L/150 L/180 L/240 L/360 3/0.91 298/4353 Fv / / / / 221/3228 4/1.22 167/2442 Fv / / / 157/2286 104/1519 5/1.52 107/1558 Fb / / / 84/1233 56/817 6/1.83 74/1077 Fb / / 67/980 50/731 33/483 7/2.13 54/788 Fb / 52/753 43/625 32/465 21/305 8/2.44 41/600 Fb / 35/506 29/419 21/311 /202 9/2.74 32/471 Fb / 24/355 20/293 15/216 10/139 10/3.05 26/378 Fb / 18/256 /211 11/155 7/98 11/3.35 21/310 Fb 20/292 13/190 11/156 8/113 5/71 12/3.66 18/258 Fb 15/223 10/4 8/117 6/84 4/51 Minor Axis ********Laterally Supported ********** A w (in. 2 / mm. 2 )=0.44 / 283.9 Wt.(lbs./ kg/m)=0.86 / 1.28 I(in. 4 / mm. 4 )=0.22 / 91571 S(in. 3 / mm. 3 )=0.21 / 3441 SPAN MAXIMUM DEFLECTION FT/m LOAD L/100 L/150 L/180 L/240 L/360 3/0.91 154/2245 Fb 115/1683 77/1117 64/928 47/693 31/457 4/1.22 86/1256 Fb 49/716 32/472 27/391 20/290 13/188 5/1.52 55/799 Fb 25/363 16/237 13/195 10/3 6/90 6/1.83 38/550 Fb /205 9/132 7/107 5/77 3/46 The part weight has been deducted in the above tables. English/ Metric This item is stocked in 20foot lengths in Standard Polyester (STD) and Polyester Fire Retardant (FR). Other lengths available in mill run quantities. The mill run on this item is 1,000 feet. Orders for less than mill run quantities will be subject to setup charges as well as premium per foot cost. 264 Reynoldsdale Road, Bedford, PA 155227401 Phone: 86238125 Sales Fax: 86236032 www.bedfordplastics.com Email: frpsales@bedfordplastics.com 45 6/2007
TEKS WOODTOMETAL SELFDRILLING FASTENERS Selector Guide Part Head Drill Drill & Tap Wood Description Box Number Style Point Capacity Attachment Applications Range Qty 1565500 1016 x 1'' Wafer #3.030.175 1/4''1/2'' 2,500 1791000 1016 x 113/16'' **PSD Flat #3.030.175 1/4''3/4'' 2,500 1077000 1024 x 3/4" Wafer #3.036.175 1/4''3/8'' 8,000 1079000 1024 x 1" Wafer #3.036.175 1/4''1/2'' 5,000 1547500 1024 x 11/4" PFH #3.036.175 1/4''3/4'' 5,000 1643100 1024 x 11/4" Wafer #3.036.175 1/4''3/4'' 5,000 1548500 1024 x 11/2" PFH #3.036.175 1/4''1'' 3,000 1644100 1024 x 11/2" Wafer #3.036.175 1/4''1'' 3,000 1082000 1024 x 17/16" *PFH #3.060.175 1/4''3/4'' 3,000 1588910 #2 PSD Bit 1 1552500 1224 x 15/8" *PFH #4.125.250 3/4''11/8'' 2,500 1092000 1224 x 21/4" *PFH #4.125.250 3/4''13/8'' 2,000 1094000 1224 x 23/4" *PFH #4.125.250 3/4''15/8'' 1,500 1096000 1/420 x 3" *PFH #4.125.250 3/4''2'' 1,000 * With wings ** With ribs under head Product Report No. 02705 Plywood, mansard, fascia, roofing, flooring to steel framing Plywood, 2 x 4 s headers to steel framing 2 x 4 s to steel framing Performance Data Fastener Dia. Pt. #1016 3 #1024 3 #12 4 1/4 4 PULLOUT VALUES (average lbs. ultimate) Steel Gauge 26 24 208 22 266 20 299 18 499 16 708 967 12 74 3/16 1/4 334 495 702 900 1570 3865 4101 1508 4297 1803 Fastener (diatpi) 1016 1024 1224 1/420 FASTENER VALUES Tensile Shear (lbs. min.) (avg. lbs. ult.) 1936 00 2702 1500 3165 2200 3860 2700 Torque (min. in. lbs.) 61 65 150 168 Gauge No. SHEET STEEL GAUGES 12 16 Decimal Equivalent.105''.075''.060''.048''.036''.030''.024''.018'' The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes. 18 20 22 24 26 SHEAR VALUES (average lbs. ultimate) Fastener Steel Gauge (lapped) Dia. #10 #12 1/4 Pt. 3 4 4 20 728 18 1266 16 1540 1522 12 2048 2650 1/8 2030 2820 Installation Guidelines A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 02500. Adjust the screwgun nosepiece to properly seat the fastener. Worn or damaged bit tip should be replaced. The fastener is fully seated when the head is flush with the work surface. Overdriving may result in torsional failure of the fastener or stripout of the substrate. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread. All #10 diameter Winged parts must be driven into a minimum of 16 GA steel thickness. All 1/4 and #12 diameter Winged parts must be driven into a minimum of 1/8" steel in order to break the wings consistently. 1349 West Bryn Mawr Avenue Itasca, Illinois 603 6305953500 Fax: 6305953549 www.itwbuildex.com Teks, Climaseal and Spex are trademarks of ITW Buildex and Illinois Tool Works, Inc. Phillips Square Driv is a registered trademark of the Phillips Screw Company. 2010 ITW Buildex and Illinois Tool Works, Inc.
CARTRIDGES310mLSIZE SAUSAGEPACKS400mLSIZE