How To Make A Power Drill

Transcription

1 Fasteners and Accessories Selection Guide Western States Metal Roo ng s standard selection of fasteners and accessories to complement our metal panel offering: Metal to metal fasteners Metal to wood fasteners Rivets Standing seam roof attachment Pipe ashing Ridge ventilation Closure Tapes and sealant Fax: (602)

2 Impax Self-Drilling Fasteners Precision cold forged assuring superior point strength and the fastest drilling time performance through high strength steel and nested purlins. Ultimate performance in light, medium and heavy gage applications. Designed and engineered to have low driving and thread engagement torque and provide maximum clamp load. Corrosion resistant coating system Available painted to color match Impax Sealer Impax Structural 1/4-14 Impax Sealer Lap Impax - Sealer - Cupped HWH with EPDM sealing washer Sealer Impax Drilling capacity: Thickness is based on normal single thickness purlin/girt or multiple material thickness combined for total. Min projection: 3/16 of threads Available Length: 3/4 to 1-1/2 Stock Lengths: 1, 1-1/2, 2 1/4-14 Sealer Impax Lap Panel to panel side lap Drilling capacity: Some applications may require attaching light gage (24-26 ga.) to sub-structural member. Composite thickness should not exceed.095. Length: 7/8 Impax - Heavy metal thickness with bond seal washer- structural drill screw Impax Impax 5 Drilling capacity: Thickness is based on normal single thickness purlin/girt or multiple material thickness combined for total. Thread length: x 1-1/4 :.650 Min projection: 3/16 of threads Drilling capacity: Thickness is based on normal single thickness purlin/girt or multiple material thickness combined for total. Thread length: x 1-1/4 :.520 Stock Length x 1-1/2 : x 2 : Min projection: 3/16 of threads Impax - Performance drill screw with bond seal washer Impax Drilling capacity: Thickness is based on normal single thickness purlin/girt or multiple material thickness combined for total. Min projection: 3/16 of threads Available Length carbon steel: 3/4 to 4 Available Length 410 Stainless: 3/4 to 1-1/2 1/4-14 Impax Lap Panel to panel side lap Drilling capacity: Some applications may require attaching light gage (24-26 ga.) to sub-structural member. Composite thickness should not exceed.095. Length carbon steel: 7/8 Length 410 Stainless: 7/8 page 2

3 Woodgrip Metal to Wood Fasteners Woodgrip Woodgrip is the original sheet to wood fastener designed to penetrate metal panels: High hex washer head provides driving stability and a sharp point for quick installation Assembled with a control seal washer for a consistent weather tight seal and improved installation appearance Extended corrosion resistant coating system Available painted to color match Woodgrip 9-15 HWH Sharp Point Control Seal Metal to wood Drilling capacity: 24 ga (.024) Penetrates through the metal panel and taps into wood substrate. Min projection in wood substrates should be no less than 1 HiLo Wood Driller HiLo Wood Driller is a sheet to wood fastener designed to selfdrill metal panels: High hex washer head provides driving stability Precision cold forged assuring superior point strength and the fastest drilling time performance Assembled with a bond seal washer for a consistent and tight seal and improved installation appearance Available painted to color match HiLo Wood Driller HWH Bond Seal Metal to wood Drilling capacity: 22 ga (.031) Self-drills through the metal panel and taps into wood substrate. Min projection in wood substrates should be no less than 1 1/4 Hex Washer Head Thread Major Dia.: Thread Minor Dia Strength Carbon Steel (lbs ult): Tensile: 1751 Torsional: 60 in-lbs min. Shear: 1223 Strength Stainless Bi-metal(lbs ult): Tensile: 1657 Torsional: 50 in-lbs min. Shear: 1550 Available carbon steel stainless bi-metal Available Length: 1, 1-1/2, 2, 2-1/2, 3 Stock Lengths: 1, 1-1/2, 2 1/4 Hex Washer Head Thread Major Dia.: Thread Minor Dia.: Strength Carbon Steel (lbs ult): Tensile: 1751 Torsional: 60 in-lbs min. Shear: Strength 410SS (lbs ult): Tensile: 2520 Torsional: 90 in-lbs min. Shear: 1790 Available carbon steel 410 stainless steel Stock Length: 1, 2 Blind Rivet Stainless Rivet / Stainless Mandrel Painted to match standard industry colors Description: STST43 Head Style: Dome Rivet Dia. Nom.: 1/8 US Dimen: 43 Grip Range: Hole Size/Drill No.: #30 ( ) Shear (Min Strength lbs.): 420 Tensile (Min Strength lbs.): 530 Page 3

4 Standing Seam Roof Attachment Snap Lock Clip 1-5/8 Snap Lock Bearing Plate #10 Type A Pancake #10 Self-Drill Pancake #12-24 #5 Pt. Pancake Standing Seam Panel Clip Snap Lock 1-5/8 Height = 1.81 Width Hole Material: 18 ga. G-90 Galv. 18 ga. Stainless Steel Carton Qty: Part # Snap Lock Bearing Plate Part # Size Material Ctn. Qty x 6 24 ga. G-90 Galv. 125 Clip Fasteners #10 Type A Pancake Head 2/2 Quadrex Drive Metal to wood Available Material: Carbon Steel, Zinc Plated 300 Series Stainless Steel Available Length: 1, 1-1/2, 2 Stock Lengths: 1 #10 Self-Drill Pancake Head 2/2 Quadrex Drive Carbon Steel, Zinc Plated Min projection: 3/8 of threads Drilling capacity: Available Length: 1, 1-1/2, 2 Stock Lengths: 1 #12-24 #5 Point Pancake Head 2/2 Quadrex Drive Carbon Steel, Zinc Plated Metal to metal Min projection: 3/8 of threads Drilling capacity: Length Part # 1-1/2 S4750F Available Length: 1-1/2 Page 4

5 Pipe Flashing Pipe opening can be easily customized on job sight utilizing clearly marked pipe diameters on each ashing. EPDM and silicone are both exible materials, resistant to ultraviolet rays, cracking or weathering. The aluminum base is corrosion resistant and conforms easily to any panel con guration or roof pitch. Retro t ashing is available for piping with welded caps or cross bars. Available EPDM black or silicone red Square Base Size Pipe Size Base Size * 1 1/4 2-3/4 4-1/2 * 2 7/8 4 6 * 3 1/4 5-3/4 8 * 4 2-3/ / / / /4 13-1/ /2 20-1/ /2 34 * Denotes stock item - EPDM Black Round Base Size Pipe Size Base Size * 1 1/4 2-1/2 4-3/4 * 2 1-3/ /4 * 3 1/ /4 * /4 9-1/ /4 7-3/4 10-3/ / / / /2 * Denotes stock item - EPDM Black Retro t Round Base Zipper Size Pipe Size Base Size * 1 3/4 2-3/4 4-3/4 * /4 10-3/ / /4 * Denotes stock item - EPDM Black Material Speci cations Test Type EPDM Silicone (Hi-Temp) Advance ozone resistance 70 hrs. 70 hrs. 500 pphm High temperature: Intermittent +275 F +500 F Continuous +212 F +437 F Low temperature: Resistance tested to: -65 F -100 F Tensile strength 1450 psi 700 psi Page 5

6 Pro levent Ridge Ventilation Pro levent is a unique attic ventilation system that has the metal roo ng panel pro le cut into the surface. With the added ease of roll-out installation, the low pro le provides excellent curb appeal with a proven ventilation performance for the life of the roof. Limited lifetime warranty Glue spots prevent slipping during installation Fits under any ridge cap Fits any pitch 2:12-20:12 One person roll-out installation Won t scratch panel nish Won t crack, dent or rust during shipping or installation Won t clog from airborne dust Prevents insect in ltration Prevents snow in ltration Provides proven roof ventilation Meets all model building codes Packaging in English, French and Spanish No waste - use leftovers on next job Will not support a ame Made in USA Panel pro les: 7/8 Corrugated R Panel 16 Standing Seam 18 Standing Seam # /4 Ridge Cap Anchor Clip for standing seam pro les WG-7 TM Closure WG-7 TM Closure for panel opening ller Material thickness: 1 Color - Black Closed cell polyethylene foam for exceptional strength and compressibility Available with adhesive applied to the contact side of the panel surface assures positive positioning during installation Resists damaging ultra violet rays and ozone deterioration In stock pro les: 7/8 Corrugated R Panel Western Rib Standing Seam 1-1/2 B Deck W-2 Formlok W-3 Formlok Deep Vercor Page 6

7 Butyl Sealant Tape Designed for side and end lap sealing of metal panels, roof vents and pipe ashing PART # DESCRIPTION FEET/ROLL ROLLS/CTN V8000 3/16 Bead Butyl Sealant 25 Roll 48 rolls/ctn * V8020 3/8 x 3/32 Butyl Sealant 45 Roll 48 rolls/ctn V8040 1/2 x 3/32 Butyl Sealant 50 Roll 20 rolls/ctn V8080 3/4 x 3/32 Butyl Sealant 50 Roll 14 rolls/ctn * V8140 7/8 x 3/16 Double-Bead Butyl Sealant 25 Roll 8 rolls/ctn * Stock item Nova ex Metal Roof Sealant Nova ex metal roof sealant provides unbeatable adhesion to most common construction materials, including Kynar Non-corrosive, single component, oxime cured silicone sealant and/or adhesive Applications include metal roofs and siding, wood, galvanized steel, ashing, aluminium, PVC, windows and masonry Tack free in 10 minutes; completely cured in 2 days Permanently exible; will not shrink, crack, sag or slump Provides a waterproof, weather tight seal Extrudes down to 0 o F Will not freeze Available in 16 colors STOCK COLORS NON-STOCK AVAILABLE COLORS Sold in full case quantities only / 12 tubes per case PART # COLOR PART # COLOR PART # COLOR White Almond Hemlock Green Brown Dark Bronze Sandstone Translucent Black Red Gutter Gray Sierra Tan Green Medium Bronze Antique White Light Gray Charcoal Gray Hannoband BG1 Joint Sealant Tape Hannoband BG1 is a pre-compressed, self-expanding polyurethane foam with acrylate dispersion impregnation Provides resistance to rain, wind, sound, draft and dust Use for sealing joints and seams in metal panels, gaps around door and window frames, and expansion joints in buildings Pressure sensitive adhesive for fast and easy installation Flame retardant BG1 provides maximum environment protection by: Greatly reducing air in ltration Highest levels of resistance to wind driven rain Superior sound proo ng Extended functional life Highest re rating Smallest thermal change (temperature gradient) inside and outside of sealed joint Expanded Size Part # Roll Size Width x Height Length Packaging /4 x 1 1 x Ft. 12 rolls/ctn /8 x 1 1 x 1-1/ Ft. 12 rolls/ctn Page 7

8 Available Metal Panel Colors Bright White Desert Beige Light Stone Polar White Sahara Tan Hawaiian Blue Ash Gray Koko Brown Emerald Green Charcoal Country Red Copper Penny Zatique Gray Weathered Copper Vintage Gray AZP Raw Weathered Rustic Weathered Metallic Please call for color chip and chart Fax: (602) May 2013