STOUCO Drilling Equipment

STOUCO Drilling Equipment

Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift tr. travel speed : 0 30 m/min (0-98 ft/min) travel mode : PS to SB / SB to PS travel distance : 2,5 mtr Lift. head travel speed : 0 12 m/min (0-39 ft/min) travel mode : Up / Down travel distance : ~6 mtr Tubular range : Drillpipe 3,5" 5" 5,5" 6 5/8" : Casing 5" 7" 9 5/8" 13 3/8"

Automatic Greasing System Material (cabinet) : AISI 316L Outside dimensions (cabinet) : LxBxH = 1.2 x 0.5 x 1.2 mtr Weight : approx. 250 kg E-motor : 0.18kW, 400V/3ph/50Hz, IP56 Pump capacity : 41.6cc per day Operating temperature : -20 upto + 80ºC Working pressure : upto 200 bar Numbers of ports : 12 Port connection : R ¼ Volume of grease reservoir : 30 Ltr. Allowable grease sorts : Grease on mineral oil base till NLG1-class2, DIN 51818 : For: -20ºC to 70ºC NLG # 2 (Shell Alvania EP2) : For: -45ºC to 5ºC NLG #0 (Shell Alvania EPR0)

BOP Guidance System Type :Stouco GD320.5 Overall SWL GD320-5 travel Dolly travel GD travel speed Dolly travel Weight Classification Operation area : 50T (Horizontal). : ± 14 mtr. from centreline ship to portside : ± 16 mtr. from centreline ship to starboard : ± 5.5 mtr. up / down : 0 5 m/min (0-16,4 ft/min) travel mode: PS to SB / SB to PS : 0 5 m/min (0-16,4 ft/min) travel mode: Up / Down : 28T : ABS : West Africa

Derricksman Cabin Type :Stouco-CA2 Material : AISI 316L. Outside dimensions : LxBxH = 2,25 x 1,35 x 2,1 mtr Door width : 600mm Capacity : 2 Persons Weight : approx. 1000 kg Painting : pickled & glass blasted Included : Heating : 3x Window wipers : 1x Adjustable chair : Insulation : Ventilation hatch Control : From chair & touch screen

Drill Floor Manipulator Technical Specification: Weight : 8T Height in stowed position : 2540 mm Total length with boom retracted : 5150 mm Stroke telescopic boom : 5100 mm Luffing angle from horizontal : +30-15 Slewing angle : 120 Gripperhead tilting angle : +25-40 Push/pull force horizontal arm : 30 kn Lift capacity at min. reach : 1.9T Lift capacity at max. reach : 1T Slewing torque : 116 knm Gripping head torque max. : 1.75 knm Clamping force max. : 30 kn Telescoping time over 5,1m stroke in/out Luffing time over 45 up/down Slewing speed max. Gripperhead rotation continuous max. : 20 sec. : 15 sec. : 3 rpm : 5 rpm Clamping range O.D. set no. 1 : from 3,5" to 9,5" Clamping range O.D. set no. 2 : from 9.5" to 16" Clamping range O.D. set no. 3 : from 16" to 26"

Fairleaders Fairleaders for (steel)wire rope guidance Capacity Number of rollers : 1T upto 20T : 4x (for guiding in all directions)

Finger board Monkey board Finger board type Monkey board type :Stouco - FB55 :Stouco - FB658 :Stouco - FBDC :Stouco - MB14 SMST-FB55 : Maximum size drill pipes : 5 ½ : Maximum stands in complete board : 196 SMST-FB658 : Maximum size drill pipes : 6 5/8 : Maximum stands in complete board : 144 SMST-FBDC : Maximum drill collar size : 9 ½ : Maximum stands in complete board : 8 SMST-MB14 : Length : 4.5 mtr. (14-9 ) : With : 1.29 mtr. (4-2 3/4 ) : SWL (one person at end) : 100 Kg (220 lb.) : Test load : 200 Kg (440 lb.) : Storage : Vertical down

Foldable cabin platform Type :Stouco.FCP-750x3800-150-1 Load on platform : 150 Kg/m 2 Capacity : 1 person with tools (100kg) Folding : by hydraulic cylinder Railing heigt : 1100 mm Weight : abt 700kg Materials : S355J2G3 Surface treatment : All parts Hot Dip Galvanized 70 mu Operating area : North Sea

BOP Guidance System Type :Stouco GD320.5 Overall SWL GD320-5 travel Dolly travel GD travel speed Dolly travel Weight Classification : 50T (Horizontal). : ± 14 mtr. from centreline ship to portside : ± 16 mtr. from centreline ship to starboard : ± 5.5 mtr. up / down : 0 5 m/min (0-16,4 ft/min) travel mode: PS to SB / SB to PS : 0 5 m/min (0-16,4 ft/min) travel mode: Up / Down : 28T : ABS

Jigger Winch Jigger winch for replacement of the hydraulic hoses via a drag chain Type :Stouco-JW817 Capacity : 17 hoses 4 Steel layers ¾ hose OD : 32 mm Maximum travel of hoses to trolley : 15,4 mtr Overall dimensions (lxbxh) : 0,771 x 2,290 x 10,407 mtr. Weight : 4T

Monkey board Diving board Type :Stouco.HDRB.22.300.6 :Stouco.HDRB.25.300.6 Load on platforms Static hold Diving board stroke Monkey board stroke Monkey board Diving board : 1 person at tip approx. 80 kg SWL in operation : 150 Kg : 1500 mm (59 ) in abt. 40 sec. : 1700 mm (67 ) in abt. 40 sec. : Fixed : Travel speed 0-16 m/min (52.5 ft./min)

Man Working Basket Type :Stouco.MWB.2,5.TT.5,6/10,6 SWL in basket Allowed in basket Min. reach (boom horizontal) Max. reach (boom horizontal) Stroke of basket Luffing angle below/above horizontal Rotating Operating pressure (dynamic load) System test pressure Required flow Weight : 250 Kg : 2 persons : 6200 mm : 10500 mm : 2x2125 mm : 60 / 85 degrees : 60 degrees : abt 160 bar : 320 bar : abt 50 L/min : 2880 Kg

Pipe Handling Crane Type :Stouco-PHC14 Installed power : 2x30kW HPU (100% backup) Minimum handling : 20 stands per hour Tubular Capacity : 3 ½ upto and including 6 5/8 SWL : 1,4T (3000 lb.) All over weight : 11,5T (25400 lb.)

Riser-Casing Transporter Type :Stouco-RCT400 Installed power Overall SWL Hook speed : 225kW : 2x25T (55115 lb.) : 0-5 m/min (0-16 ft./ min) Riser Handling mode (SWL 35 tons) : 0-30 m/min (0-98ft./ min) Casing handling (SWL max. 4 tons) RCT travel speed (FWD-AFT) : 0 25 m/min (0-82 ft/min) (FWD-AFT) Overhead speed (PS-SB) : 0 8 m/min (0-26 ft/min) Riser handling mode 0 30 m/min (0-98 ft/min) Casing handling mode (max. 4T)

Setback stabber A stabbing machine that can operate as a - Setback stabber - Collar stabber - Casing stabber Type Stouco-SBS4000 Capacity : 900kg Installed power : 15 kw HPU (EX II 2G Eex m II T6) Backup control on HPU Tubular capacity : 3 ½ upto and including 6 5/8 drill pipe : 4 ¾ upto and including 9 ½ drill collar : 4 ½ upto and including 13 3/8 casing Mounting level : abt. 9 mtr. above drill floor Outreach, boom horizontal : abt 4 mtr. Boom luffing/lowering : 10 up and 90 down, from vertical position Lowering time : abt. 30 sec. Rotating : 160 CW and 160 CCW Rotating speed : 0 2 rpm Telescoping distance : 2350mm in abt. 15 sec. Weight : 3.5T

Extendable Sinkerbar platforms Specification The structure comprises of two adjustable type of platforms in the derrick at 56 & 49 mtr. level. Both platforms will be used to handle one sinker bar. The stroke with or without load of the extendable platforms is approx. 2700 mm. A third platform is located at 52 mtr., to create an easy access between the platforms. At the EPT 49 a two persons waiting station is located All functions are hydraulically operated in an open loop circuitry, with a max. operating pressure of 180 bar. All components are designed for a max. pressure of 350 bar. - Designs load on platforms is 9000N/mm 2 (ABS)

Variable working platform Type :Stouco.WFLS-250 SWL in basket Allowed in basket Min. reach Max. reach Stroke 1 st telescopic arm Stroke 2 nd telescopic arm Operating pressure Weight : 250 Kg : 2 persons : 0 mtr : 11.5 mtr. : 3.5 mtr. : 1.2 mtr. : 210 Bar (3000 psi) : abt. 2500 kg (5510 lb)