Tabela de Carga: Grove RT 522B - Comercial

Transcription

1 Tabela de Carga: Grove RT 522B - Comercial Desenvolvedor autorizado

2 Dimensions 11' 1-3/8" (3387) TAILSWING 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET 8' 5 1/2" (78) 8' 2" (2489) ' 3-3/8" (9229) RETRACTED 78' (23 796) EXTENDED ' 11-7/8" (3349) 6' 3" (1905) 1' 11" (587) 5' 5-1/2" (1665) ' 4" (3158) ' 1-5/8" (89) ' 5" (3216) OVERALL HEIGHT ' 1" (73) 5' 3" (1600) ' 8" (1423) 14' 7-3/8" (4454) 21' 4-1/8" (6505) Note: ( ) Reference dimensions in mm Turning Radius ' Front Axle Load ,860 lbs. (9916 kg) Rear Axle Load ,788 lbs. ( 336 kg) Gross Vehicle Weight ,648 lbs. ( 2 kg) 2 1

3 Working range - 78 ft. ft. (7.6 m) (86 kg) 0% 36 FEET MAX. BOOM ANGLE AXIS OF ROTATION FEET 2'-7" 4'-6" DIMENSIONS ARE FOR LARGEST GROVE FURNISHED HOOK BLOCK AND HEADACHE BALL, WITH ANTI-TWO BLOCK ACTIVATED. 3 2

4 Superstructure specifications ft ft. (9.2 m m) three-section full power boom. Maximum tip height: 84 ft. 9 in. (.8 m). Fixed Swingaway Extension ft. (7.6 m) lattice swingaway extension. Nonoffsettable. Stows alongside base boom section. Maximum tip height: 8 ft. 11 in. (33.2 m). Nose Three steel sheaves mounted on heavy duty permalubed tapered roller bearings with removable pin-type rope guards. Quick reeve type boom nose. *Optional removable auxiliary boom nose with removable pin type rope guard. Elevation One double acting hydraulic cylinder with integral holding valve provides elevation from -3 to +78. Load Moment & Anti-Two Block System Standard load moment and anti two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. Cab Full vision, all galvanealed steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe reclining seat incorporates adjustable armrest with hydraulic single-axis controllers. Dash panel incorporates gauges for all engine functions. Other standard features include: cab circulating air fan, sliding side and rear windows, electric windshield wash/wipe, manual skylight wiper, swing horn, fire extinguisher, seat belt, and tachometer. Swing Planetary swing with foot applied multi-disc brake. Spring applied, hydraulically released swing brake. One position, plunger type mechanical house lock, and a 36 positive swing lock, both operated from cab. Maximum speed: 3.0 RPM. Counterweight (86 kg) integral with superstructure. 773 lbs. (351 kg) slab in place of auxiliary hoist. Hydraulic System Two main gear pumps with a combined capacity of 72.0 GPM (272.5 LPM). Maximum operating pressure: 3500 PSI (241 bar). Two individual pressure compensated valve banks. Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with micron filtration rating of 5/12/ gallon (3 L) reservoir. Remote-mounted oil cooler with thermostatically controlled electric motor driven fan. System pressure test ports with quick release type fittings for each circuit. HOIST SPECIFICATIONS Main and Auxiliary Hoist Planetary reduction with automatic spring applied multi-disc brake. Grooved drum. Electronic hoist drum rotation indicator and hoist drum cable followers. Maximum Single Line Pull: Maximum Single Line Speed: Maximum Permissible Line Pull: Rope Diameter: Rope Length: Maximum Rope Stowage: *Denotes optional equipment 12,148 lbs. (55 kg) 287 FPM (87 m/min) 9,080 lbs. (4119 kg) 5/8 in. (16 mm) 370 ft. (113 m) 370 ft. (113 m) 4 3

5 Carrier specifications Chassis Box section frame fabricated from high-strength, low alloy steel. Integral outrigger housings and front/rear towing and tie down lugs. Outrigger System Four hydraulic telescoping single-stage double box beam outriggers with inverted jacks and integral holding valves. Three position setting. All steel fabricated quick release type square outrigger floats, 16.5 in. (419 mm) square. Maximum outrigger pad load: 38,600 lbs. ( kg) Outrigger Controls Controls and crane level indicator located in cab. Engine Cummins 4BTA3.9 diesel, aftercooled, turbocharged, 1 bhp (96.7 kw) 2,500 RPM. Maximum torque: 360 ft. lbs. (488 1,500 RPM. Fuel Tank Capacity gallons (151 L) Transmission Full powershift with 6 forward and 6 reverse speeds. Front axle disconnect for 4 x 2 travel. Electrical System 12 V - maintenance free battery. Drive 4 x 4 Steering Full independent power steering. Front: Full hydraulic steering wheel controlled. Rear: Full hydraulic hand lever controlled. Provides 4 main steering modes: front only, rear only, crab and coordinated. Rear steer indicating gauge. Axles Front: Drive/steer with differential and planetary reduction hubs rigid mounted to frame. Rear: Drive/steer with differential and planetary reduction hubs pivot mounted to frame. Oscillation Lockouts Automatic full hydraulic lockouts on rear axle permit oscillation only with boom centered over the front. Brakes Full hydraulic split circuit brakes operating on all wheels. Spring-applied, hydraulically released transmission-mounted parking brake. Tires 17.5 x -PR earthmover type, tubeless. Lights Full lighting package including turn indicators, head, tail, brake and hazard warning lights. Maximum Speed 22 mph (35 kph) Maximum Gradeability Infinite (Theoretical based on 17.5 x tires, 78 ft. [23.8 m] boom and ft. [7.6 m] swingaway). Miscellaneous Standard Equipment Full width galvanealed steel fenders, dual rear view mirrors, hookblock tiedown, electronic back-up alarm, light package, front stowage well, cold start aid (less canister), cab mounted worklight, engine distress A/V warning. *Optional Equipment * Auxiliary hoist (Dealer installed) * Hookblock * Headache ball * Auxiliary boom nose (Dealer installed) *Denotes optional equipment 5 4

6 - 78 ft. (86 kg) 0% 36 Pounds ft. Ext & 78 ft. Feet ,000 39,0 31,0 22,450 (34) 42,850 38,0 31,0 23,050 17,0 (42.5) 13,450 (29) 39,150 (74.5) 36,0 (72) 31,700 (68.5) 23,450 17,450 (55) 13,700 (47),500 (38) 8,590 (26) *31,450 31,450 27,850 (73) 23,0 (67.5) 17,900 14,000 (56.5),750 8,8 (43) 7,1 (35) 5,7 (24),0 21,000 (71.5) 17,500 13,800 (62.5),900 9,000 (52) 7,290 (46.5) 5,9 () 4,8 (32.5) 3,970 (22.5) *16,0 16,0 (74) 13,0 11,0 (66) 9,600 (61.5) 8,3 7,3 (52.5) 6,050 (47.5) 4,990 (42) 4,1 (35.5) 3,4 (27.5) 2,850 (16) *12,500 11,0 (75.5),0 (72.5) 9,500 (69.5) 8,0 (66.5) 7,170 (63.5) 6,260 (60) 5,500 (57) 4,660 3,9 (49.5) 3,3 (45.5) 2,800 (41) 2,360 (36.5) 1,980 (31) 1,6 (24) 1,3 (14) Minimum boom angle (deg.) for indicated length 0 Maximum boom length (ft.) at 0 deg. boom angle (no load) 3 NOTE: ( ) angles are in degrees. * This capacity is based upon maximum boom angle. Angle ,950 (23.8) 7,360 (33.8) 5,190 (43.8) 3,7 (53.8) 2,7 (63.8) 2,060 (71.8) NOTE: ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 6 5

7 - 78 ft. (86 kg) 50% 13' (4.0 m) Spread 36 Pounds ft. Ext & 78 ft. Feet ,800 33,750 27,950 17,0 (34) 39,0 34,0 27,650 17,0 11,450 (42.5) 8,1 (29) 39,150 (74.5) 34,500 (72) 26,0 (68.5) 17,0 11,600 (55) 8,280 (47) 6,0 (38) 4,550 (26) *31,450 31,450,0 (73) 16,700 (67.5) 11,800 8,460 (56.5) 6,270 4,7 (43) 3,590 (35) 2,690 (24) 24,0 16,150 (71.5) 11,750 8,660 (62.5) 6,450 4,900 (52) 3,760 (46.5) 2,880 () 2,180 (32.5) 1,590 (22.5) *16,0 15,750 (74) 11,500 8,780 (66) 6,6 (61.5) 5,060 3,9 (52.5) 3,0 (47.5) 2,3 (42) 1,750 (35.5) 1,260 (27.5) *12,500 11,350 (75.5) 8,800 (72.5) 6,990 (69.5) 5,6 (66.5) 4,4 (63.5) 3,5 (60) 2,800 (57) 2,2 1,7 (49.5) 1,3 (45.5) 0.1A (lbs.) Minimum boom angle (deg.) for indicated length Maximum boom length (ft.) at 0 deg. boom angle (no load) 70 NOTE: ( ) angles are in degrees. * This capacity is based upon maximum boom angle. Angle,950 (23.8) ,370 (33.8) 3,6 (43.8) 2,1 (53.8) 1,2 (63.8) NOTE: ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 7 6

8 - 78 ft. (86 kg) 0% 7' 7" (2.3 m) Spread 36 Pounds Feet ,650 23,350 22,050 (74.5) *18, ,850 13,0 18,0 13,0 17,450 (72) 12,950 (68.5) 16,650 12,450 (73) 12,000 *11,450 8,3 (34) 8,390 5,4 (42.5) 8,500 5,550 (55) 8,3 (67.5) 5,7 8,1 (71.5) 5,7 7,9 (74) 5,6 3,560 (29) 3,700 (47) 3,860 (56.5) 4,0 (62.5) 4,090 (66) 35 2,4 (38) 1,5 (26) 2,600 1,680 (43) 2,770 1,850 (52) 2,9 (61.5) 1, ,150 (46.5) 1,280 (52.5) 0.1A (lbs.) Minimum boom angle (deg.) for indicated length Maximum boom length (ft.) at 0 deg. boom angle (no load) NOTE: ( ) angles are in degrees. * This capacity is based upon maximum boom angle. Angle 5,850 (23.8) 2,5 (33.8) NOTE: ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 8 7

9 - 78 ft. (86 kg) Stationary x ( Ply) Tires Pounds Feet ,150 14,950 11,0 6,5 (34) 18,150 14,950 11,0 6,5 4,0 (42.5) 2,900 (29) 18,150 (74.5) 14,950 (72) 11,0 (68.5) 6,5 4,0 (55) 2,900 (47) 14,950 11,0 (73) 6,5 (67.5) 4,0 2,900 (56.5) Minimum boom angle (deg.) for indicated length (no load) ,8 (38) 1,0 (26) Maximum boom length (ft.) at 0 deg. boom angle (no load) NOTE: ( ) angles are in degrees 1,8 1,0 (43) Angle 4,1 (23.8) 1,8 (33.8) NOTE ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9 8

10 - 78 ft. (86 kg) Stationary Defined Arc Over Front x ( Ply) Tires Pounds Feet ,650 18,850 15,650 11,800 (34) 21,650 18,850 15,650 11,800 8,0 (42.5) 21,650 (74.5) 18,850 (72) 15,650 (68.5) 11,800 Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 deg. boom angle (no load) 60 NOTE: ( ) angles are in degrees 5,9 (29) 8,0 (55) 5,9 (47) 4,490 (38) 3,470 (26) 18,850 15,650 (73) 11,800 (67.5) 8,0 5,9 (56.5) 4,490 3,470 (43) 2,7 (35) 2,1 (24) Angle ,7 (23.8) 4,790 (33.8) 2,880 (43.8) 1,750 (53.8) NOTE ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9

11 - 78 ft. (86 kg) Pick & Carry Up to 2.5 MPH Centered Over Front 17.5 x ( Ply) Tires Pounds Feet ,000 18,000 14,600,700 (34) 21,000 18,000 14,600,700 8,0 (42.5) 21,000 (74.5) 18,000 (72) 14,600 (68.5),700 Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 deg. boom angle (no load) 60 NOTE: ( ) angles are in degrees 4,9 (29) 8,0 (55) 4,9 (47) 3,880 (38) 3,060 (26) 18,000 14,600 (73),700 (67.5) 8,0 4,9 (56.5) 3,880 3,060 (43) 2,0 (35) 1,870 (24) Angle ,700 (23.8) 4,1 (33.8) 2,560 (43.8) 1,5 (53.8) NOTE: ( ) Reference radii in feet. A THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 11

12 Rated Lifting Capacities Symbols Glossary IMPORTANT NOTES: Frame Steering WARNING: THIS CHART IS ONLY A GUIDE. The notes below are for illustration only and should not be relied upon to operate the crane. The individual crane's load chart, operating instructions and other instruction plates must be read and understood prior to operating the crane. 1.All rated loads meet ANSI/ASME B.5, Mobile and Locomotive Cranes. Testing and development were performed to SAEJ63, Cantilevered Crane Structures - Method of Test and SAEJ765 Crane Stability Test Code. 2. Rated loads include the weight of hookblock, slings and auxiliary lifting devices and their weights shall be subtracted from the listed rating to obtain the net load to be lifted.when more than the minimum required hoist reeving is used, the additional rope weight shall be considered part of the load to be handled. 3. Defined Arc ±6 on either side of longitudinal centerline of machine. 4. Capacities appearing above the bold line are based on structural strength.tipping should not be relied upon as a capacity indication. 5.The machine shall be leveled on a firm supporting surface. Depending on the nature of the supporting surface, it may be necessary to have structural supports under the outrigger floats or tires to spread the load to a larger bearing surface. 6.When either boom length or radius or both are between values listed, the smallest load shown at either the next larger radius or next longer or shorter boom length shall be used. 7.Tires shall be inflated to the recommended pressure before lifting on rubber. Outriggers Outrigger Controls Engine Fuel Tank Capacity Electrical System Drive Lights Cab Fixed Swingaway Tele-Swingaway Jib Nose Transmission Axles Brakes Tires Suspension Rotation Elevation Swing Counterweight Oil Hydraulic System Hoist Radius 8. For outrigger operation, outriggers shall be properly extended with tires raised free of crane weight before operating the boom or lifting loads. Extension Length Speed H Hookblock Grade Gear Lattice Extension Luffing Jib 11