Machine Moving. By Norm Berls
|
|
|
- Howard Stevens
- 7 years ago
- Views:
Transcription
1 Machine Moving By Norm Berls
2 Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy machinery. Today, especially in small shops and home shops, DIY is more common. Buy, build, rent or borrow moving tools? Hire a professional mover?
3 Basic Lifting Tools Fork Lift Local mover wanted $700 to move Bridgeport Mill (2200 lb.) from driveway into garage. Mover estimated that 2 men and a fork lift would be needed.
4 Basic Lifting and Moving Tools New machine tools will often arrive bolted to a pallet. Pallet Jack Northern Tool $ ,500 lb. capacity
5 Basic Lifting Tools Pry Bars $ , 12, 18, 24, 32, 36 inch sizes Four bar set available at Harbor Freight $9.99
6 Basic Lifting Tools Spud Bar Harbor Freight Digging Bar 72 in., 17 lb., $27.99 Homemade Pry Bar
7 Basic Lifting Tools Machine Wedge Good for initial lift where easy grip not possible. Often home made by hammering a piece of pipe into a wedge shape.
8 Basic Lifting Tools Gantry Crane $699 at Harbor Freight
9 Basic Lifting Tools Chain Hoist $ at Harbor Freight 5 Ton capacity
10 Chain Hoist and Pivoting Crane Gene Rowan at his shop. Chain Hoist Overhead crane pivots around vertical beam just behind hoist.
11 Basic Lifting Tools Engine Hoist Harbor Freight $ lb. capacity
12 Engine Hoist used to lift Clausing horizontal mill. Note the use of chains to grasp the machine. Man in the picture is a professional machine mover. Mill weighs 1,000 lbs. Basic Lifting Tools
13 Basic Moving Tools Clausing mill loaded to a Hand Cart. Mill weighs 1,000 lbs.
14 Basic Lifting Tools Toe Jack Bottle Jack with attachment and extended foot. Amazon Jet 2 ton toe jack $200.99
15 Making a Toe Jack From YouTube Toe Jack Episode 1 Very Strong Design
16 Cable Winch Commonly called a come along. Harbor Freight $ lb. capacity Lift or pull. Basic Lifting Tools
17 Steel bars commonly used as rollers. Basic Moving Tools Grease and liquid soap have been used by people who don t mind cleaning up messes. Plastic sliding pads are good for a few hundred pounds.
18 Basic Moving Tools Machine Skate Northern Tool $ lb. capacity Tom Lipton recommends piece of wood between skate and machine.
19 Making a Machine Skate Youtube Easy Equipment Moving with DIY Machine Skates Bottom View ½ inch steel plate ½ inch drill rod (Tig Welded) Ball Bearings held on with E clips.
20 Yet Another Machine Skate From Global Industrial Nylon Wheels $ Steering Arm 6000 lb. capacity Grizzly Industrial HDPE Wheels $79.95 Steering Arm 6000 lb. capacity
21 Rigging Tools Rope Cable Chain Sling Rope and fabric slings are non-conductors Rope and fabric slings are less likely to damage delicate machine parts. Steel on steel is prone to sideways slippage. Chains and cables must be secured against sideways movement.
22 Rigging Tools Armstrong C Clamps Strongly recommended for use in machine moving by Tom Lipton Note the pointed tips no pivoting pads. IronworkersTools.com $129.00
23 Rigging Tools Load Leveler Harbor Freight $26.99 ¾ ton capacity
24 Lifting Sling Northern Tool $ ft. long 6,400 lb. capacity Rigging Tools
25 Tow Strap Harbor Freight $ in. X 20 ft. 2,830 lb. capacity Lift or Pull Rigging Tools
26 Lathe Moving with Engine Hoist YouTube Engine Hoist used to pick up and move lathe Weight distributed with lifting bar. Straps spaced on either side of center of gravity.
27 Mill Moving with Engine Hoist YouTube Engine Hoist used to pick up and move Mill. Lifting straps gripping high well above center of gravity.
28 Lathe Moving YouTube 12,000 lb. lathe Note orange toe jack at far left bottom of lathe. After jacking, steel bar rollers placed under lathe.
29 Lathe Moving YouTube Large pry bar used to move lathe on rollers.
30 Moving a Bridgeport YouTube 2200 lbs. Gantry crane and chain hoist used to pick up mill for loading to a truck.
31 Moving a Bridgeport Gantry crane and chain joist used to lift mill.
32 Moving a Bridgeport Basement shop is actually at street level. Ramp used to traverse small step (3 in.) Note steel bar rollers under mill.
33 Moving a Bridgeport Steel cable and come along used to control mill as it moves down ramp. Out of picture come along is attached to a car to anchor the mill.
34 Moving a Bridgeport Pry bar used to move mill. Steel rollers resting on 4x4 wood beams. Work table has been removed. Allows mill to fit through door. Protects gibs and dovetail surfaces.
35 Tips and Pitfalls Tom Lipton The rigger must not guess, he must know. Know the weight Know the capacity Retain the Load Control the Load
36 Two Important Knots Bowline to put a loop on the end of a rope. Half Hitch trucker s hitch to make a rope taught (no slack)
37 Hitches Choker Hitch Basket Hitch Inverted Basket Hitch Toggle Hitch
38 Eye Bolts Jet mill (Bridgeport Clone) at Rex Tools has built in eye bolt on top of mill for lifting.
39 The Importance of Wood Steel against steel or concrete tends to slip if there is any sideways force. Wood increases friction even on oily surfaces. Pry bars should be used with wood blocks to avoid slippage. Machine skates should have wood between them and the machine. Prevents slippage and scratching. Wood slats or a wood pallet should be
40 From Tom Lipton Machine Skate Tips Use three machine skates; never four. Three skates are easier to arrange into a stable configuration where each skate has significant weight on it.. Four skates leave the possibility of one skate slipping out of position especially on uneven floors. Align skates in the direction of desired movement.
41 Hauling Sheet Metal From Tom Lipton Clamp multiple sheets of sheet metal together with C clamps. Clamp sheet metal to plywood or oriented strand board with C clamps. Tie wood backing to truck with rope.
42 From Tom Lipton If a Machine Slips Get out of the way no heroics Do not attempt manual intervention gravity is stronger than you are. Better yet, don t get in the way in the first place.
43 Safety Tip Mousing Hooks. Several loops of twine, string or rope used to prevent loop from jumping out of hook.
44 Weight? How can you measure the weight of a machine?
45 The End
Owner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
Materials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
Layout of Hanging Light Strings for Morningside Gym
Layout of Hanging Light Strings for Morningside Gym Loops on beams 1:00 2:00 3:00 Loop on window crank 4:00 5:00 Light String Labels STAGE 12:00 Junction Board (suspended) 6:00 11:00 7:00 10:00 9:00 8:00
(888)500-8700 T H E E Q U I P M E N T M O V I N G S P E C I A L I S T S
M A C H I N E R Y M O V I N G - R I G G I N G & H E A V Y L I F T I N G - F A C I L I T Y R E L O C A T I O N T R A N S P O R T A T I O N - W A R E H O U S I N G - C R A T I N G & P A C K A G I N G (888)500-8700
for Phoenix II-2 Human Cremation Retort
Installation Manual for Phoenix II-2 Human Cremation Retort Please Read Carefully Before Installing. Any Questions? Please Call! Failure to install properly may VOID your warranty. NOTICE: Specifications
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
DEMOLITION Photocopy this profile and distribute it as widely as possible!
Musculoskeletal hazards and controls DEMOLITION Photocopy this profile and distribute it as widely as possible! Musculoskeletal disorders (MSDs), such as chronic back pain or shoulder problems, often take
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
COMPETENCY ANALYSIS PROFILE. Rodworker 452A. (All unshaded skill sets must be demonstrated/ completed) Lift equipment and materials
COMPETENCY ANALYSIS PROFILE Rodworker 452A (All unshaded skill sets must be demonstrated/ completed) PROTECT SELF AND OTHERS Wear personal protective (PPE) Lift and Apply housekeeping rules Interpret warning
BUILDING MATERIALS, Wood, Laminated (Page 1 of 3) Viz.: Rafters; Arches; Beams; Joists; Timbers or Planks, structural or roof.
BUILDING MATERIALS, Wood, Laminated (Page 1 of 3) Viz.: Rafters; Arches; Beams; Joists; Timbers or Planks, structural or roof. 1155 & 4155 LCL: Applies to all freight in less than container load quantities.
Boom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
PLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
Directive 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
Transportation and Lifting of Liquefied Gas Dewars
Transportation and Lifting of Liquefied Gas Dewars FN000475/OJ 1 Fermilab uses liquefied gasses or cryogenics in various forms around the lab. These liquefied gasses are sometimes transported in large
Mechanical Reasoning Review
Mechanical Reasoning Review Work can be made easier or faster through practical applications of simple and/or compound machines. This is called mechanical advantage - in other words, using the principal
Product Information Report Rigging Techniques
Overview Chain Slings, Loading Angles and Choking All chain manufacturers publish working load limits for single-chain slings in straight tension and for multiple-legged slings when used at various angles.
Engineer III Simple Machines
Harford District 2014 Cub Scout Day Camp June 23-78 Knights of the Roundtable Engineer III Simple Machines Station Volunteer s Guide Thank you for being a station volunteer! The stations are the heart
Simple Machines. What are simple machines?
Definitions to know: Simple Machines Work done when an applied force causes an object to move in the direction of the force Energy ability to cause change; can change the speed, direction, shape, or temperature
Engineered Material Handling. Overhead Bridge Cranes and Gantry Cranes
TM Engineered Material Handling Overhead Bridge Overhead and Gantry Bridge Cranes and Gantry Cranes Custom Engineered Crane Systems Gantry Cranes EMH builds a complete range of gantry cranes including
Tips for Eliminating and Controlling MSD Hazards
Tips for Eliminating and Controlling MSD Hazards Force Gripping tools/equipment Provide tools that allow workers to grip the tool using a power grip Eliminate the use of pinch or key grips as much as possible
Compound Machine: Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle
Name SOL 4.2 Simple and Compound Machines NOTE - Simple machines are NOT included in the 5 th REVISED Science Standards Simple Machine: A machine with few or no moving parts. Simple machines make work
EMPLOYEE FALL PROTECTION
EMPLOYEE FALL PROTECTION You can fall from any height and be seriously injured or killed. In the construction industry, as well as any other industry, when falls from heights happen, they are usually very
2 BOXES OF HEAVY DUTY MACHINE LIFTING BRACKETS
272 12 RUBBERMAID 4-WHEEL CARTS 40 x 16 x 32 AND 40 x 25 x 32 271 12 RUBBERMAID 4-WHEEL CARTS 40 x 25 x 32 416 11 ASSORTED SHOP CARTS 418 118 x 50 WIDE 10 TON TRANSFER CART, WITH PNEUMATIC CONTROLS 37
Memberships. W.F. Welding & Overhead Cranes Ltd. Since 1986. W.F. Welding & Overhead Cranes. 1-200 Ton Overhead Cranes. Jib Cranes.
Memberships Canadian Standards Association (CSA) W.F. is approved by the Canadian Welding Bureau and certified to CSA standard W47.1-03-Division 1. Other memberships include: W.F. Welding & Overhead Cranes
How To Launch A Rocket From A Formica
Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.
all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101
ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.
UNIT 7 Crane safety. Engineering CASE STUDY. Cambridge English for. Professional English. Part 1. Part 2
Professional English Cambridge English for Engineering CASE STUDY Part 1 Read the extract from a handbook about crane safety. Then discuss the questions about the underlined keywords with a partner. When
CHAPTER 2 BLOCK AND TACKLE CHAPTER LEARNING OBJECTIVES
CHAPTER 2 BLOCK AND TACKLE CHAPTER LEARNING OBJECTIVES Upon completion of this chapter, you should be able to do the following: Describe the advantage of block and tackle afloat and ashore Blocks pulleys
Directive 2006/42/EC. Classification of equipment used for lifting loads with lifting machinery
1(9) Updated June 2012 Classification of equipment used for lifting loads with lifting machinery This classification was approved by the Machinery ing Group as a basis for a consistent application of the
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
Fulcrum Effort or Applied Force. Fulcrum Load or Resistance. Effort or Applied Force. Load or Resistance. Other First Class Lever Examples.
First Class Lever Second Class Lever Load or Resistance Fulcrum Effort or Applied Force Fulcrum Load or Resistance Effort or Applied Force Other First Class Lever Examples Action Spring Force Load Applied
Roll Handling By Jeff Damour CONVERTER ACCESSORY CORPORATION Wind Gap, PA USA
Roll Handling By Jeff Damour CONVERTER ACCESSORY CORPORATION Wind Gap, PA USA Introduction This presentation is a basic tutorial in the mechanics of roll handling. We will discuss: 1) What is roll handling?
APE Pile Driving Course: Understanding Pile Driving Leads
APE Pile Driving Course: Understanding Pile Driving Leads Pile Driving Leads Box lead dimensions Box lead swinging Box lead clip on type Box lead, fixed, extended Box lead, semi-fixed travel Flying hammer
BUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
Vehicle Recovery and Towing
Vehicle Recovery and Towing Guideline (Glove Box Edition) First Published 01-2010 Endsed by #1 Rule: It is always best to call a tow truck! However, if your company permits and equips you to pull out stuck
T53 SLAB BUNDLE EXTRACTOR ATTACHMENT
T53 SLAB BUNDLE EXTRACTOR ATTACHMENT APPLICATION AND OPERATING GUIDE Distributed By: UNIT LOAD HANDLING SYSTEMS, INC. 2301 SO. MISSION CIRCLE, FRIENDSWOOD, TX 77546 PH: 281-992-2006 FX: 281-992-2040 EM:
Simple Machines. Preparation. Objectives. Standards. Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4
Simple Machines Preparation Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4 Objectives This lesson will enable students to: Describe and define simple machines. Identify simple machines
Sewing Methods Chicago Style Stitch
Chicago Style Stitch 1 2 3 4 TWO STRANDS OF CORD PULL ALL STITCHES TIGHT STARTING STITCH FIRST STITCH SECOND STITCH VERTICAL FLAT CABLES COMPLETED KNOT A B C D NOTE 6 NOTE 7 GROUPED OR SMALL CABLES 1.
SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
ANSWER KEY. Work and Machines
Chapter Project Worksheet 1 1. inclined plane, wedge, screw, lever, wheel and axle, pulley 2. pulley 3. lever 4. inclined plane 5. Answers will vary: top, side, or bottom 6. Answers will vary; only one
Owner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
30 minutes in class, 2 hours to make the first time
Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12
Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
Pulleys. Experiment 1 The Lone Pulley
Pulleys Well, I hope you used the lever lesson to get some leverage on this work, energy and simple machines concept. This lesson we re going to pulley ourselves up by our bootstraps and play with these
SKY HOOK MODEL 8500 SERIES. Model 8500 Series Selection Chart
The Sky Hook Industrial Lifting Device has reduced our turbine engine removal time by 50%. It s a big hit around here! -Mike Maul, Manufacturing Engineer, Elliott Microturbines MODEL 8500 SERIES Designed
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
39HQ Airovision Air Handling Units
39HQ Airovision Air Handling Units Mounting instructions CONTENTS 1 - TRANSPORT AND LIFTING INSTRUCTIONS... 3 1.1 - General... 3 1.2 - Transport and storage... 3 1.3 - Roof edge protection during transport
What are simple machines? primary
What are simple machines? primary Here you will discover all sorts of interesting things about simple machines and how they work. There are some great diagrams as well! A machine is something that makes
Quick and Easy Simple Machine Experiments to Share with Your Kids
Quick and Easy Simple Machine Experiments to Share with Your Kids By Aurora Lipper Pulleys and levers are simple machines, and they make our lives easier. They make it easier to lift, move and build things.
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
(TONS) (TONS) NUMBER NUMBER Steel Case Kit Box KB-D1: 16" (406mm) x 12.375" (314) x 4.44" (113mm)
LIGHT DUTY SERIES RIGGERS KITS AND SETS CAPACITIES: 3 AND 8 TONS KIT / SET ROLLER KIT SET KIT / SET INCLUDES WEIGHT CAPACITY CAPACITY PRODUCT PRODUCT (All KITS include steel cases) lbs. kgs. (TONS) (TONS)
Inclined Plane: Distance vs. Force
1a Inclined Plane: Distance vs. Force Look at the inclined plane model you built for Card 2. It s a ramp, so it s easy to slide or roll things up and down it. As you noticed, it is a little more difficult
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation Simple Machines: 4.G.1 Introduction to Simple Machines
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
Workplace Incident Fatalities Accepted by the Workers Compensation Board in 2014
Workplace Incident Fatalities Accepted by the Workers Compensation Board in 2014 Workplace Incident Fatalities Year to date, numbers as of December 31, 2014 Workplace Incident fatalities are cases where
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the
7. PRINCIPAL STEPS 8. POTENTIAL HAZARDS 9. RECOMMENDED CONTROLS
ACTIVITY HAZARD ANALYSIS (AHA) 1. Contract Number: 2. Contractor Name: 3. Date prepared: 4. Title/Activity Performed: FIXED SCAFFOLDING 5. Location: 6. Estimated Date of Completion: 7. PRINCIPAL STEPS
How To Ensure Safety Of Lifting Equipment
1 of 12 2 of 12 CONTENTS 1.0 OBJECTIVES... 3 2.0 SCOPE... 3 3.0 DEFINITION OF TERMS... 3 3.2.1 Loose Lifting Tackle... 3 3.2.2 Examination... 4 3.2.3 Inspection... 4 4.0 RESPONSIBILITIES & AUTHORITIES...
Practical Alignment Tools and Techniques
Practical Alignment Tools and Techniques Bruce Lehmann Sr. Engineer, Thin Kerf Technologies Inc Accurate sawing requires attention to proper alignment and maintenance. Alignment is critical to modem sawmills
Ford F-Series Column Shift Repairs
Ford F-Series Column Shift Repairs I ve had it on my list to tighten up the linkage on my 52 s column shift setup for a long time. I tried to get it apart when I had all the front end sheet metal off,
Slings Effect of Angle of Lift on a Sling Rated Capacity
Slings Effect of Angle of Lift on a Sling Rated Capacity Using slings at an angle can become deadly if that angle is not taken into consideration when selecting the sling to be used. The tension on each
PRO PANELS. 1-800-525-4159 www.propanels.com. the artist s choice in display designed by artists, for artists. voice: 214-350-5765 fax: 214-350-7372
PRO PANELS by MD Enterprises the artist s choice in display designed by artists, for artists 1-800-525-4159 www.propanels.com voice: 214-350-5765 fax: 214-350-7372 MD Enterprises 1-800-525-4159 voice:
LIFT N RACK PRO OPERATING & INSTALLATION GUIDE 5500 Lb. LIFT CAPACITY
LIFT N RACK PRO OPERATING & INSTALLATION GUIDE 5500 Lb. LIFT CAPACITY IMPORTANT: READ THIS MANUAL BEFORE IN-STALLING, OPERATING OR MAINTAINING YOUR LIFT. Chassis Liner Company Sales Office Toll Free: 800-242-2448
S&W Race Cars and Components, Inc.
S&W Race Cars and Components, Inc. 11 Mennonite Church Road Spring City, PA 19475 TECH & INFORMATION: 610-948-7303 ORDERS: 1-800-523-3353 OFFICE FAX: 610-948-7342 E-Z INFO FAX 610-792-1234 CAUTION!!! -
DTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
DIY Motorcycle-to-Pickup Loading Ramp
DIY Motorcycle-to-Pickup Loading Ramp By Kent Hartland Fig 1. Unloading the bike. Notice the orange ratchet strap holding the ramp tight to the tail gate. Also, the rear wheels of the truck are in a shallow
6. Block and Tackle* Block and tackle
6. Block and Tackle* A block and tackle is a combination of pulleys and ropes often used for lifting. Pulleys grouped together in a single frame make up what is called a pulley block. The tackle refers
HealthandSafetyOntario.ca. Hazards. Introduction. Legislation
Manual Materials handling Introduction Manual materials handling operations are carried out in most workplaces. Each handling task poses unique demands on the worker. However, workplaces can help workers
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Contractor Equip & Helicopter Ops
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Equip and Methods + Helicopter Ops 22Mar08 1 Unit Objective You will be able to explain how demolition contractors and their
1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
10 ft x 20 ft / 3 m x 6 m STEEL FRAME CAR CANOPY
10 ft x 20 ft / 3 m x 6 m STEEL FRAME CAR CANOPY Instruction Manual ITM./ART.496840 VIEW ASSEMBLY VIDEO AND INSTRUCTION MANUAL AT www.zhengteusa.com Before assembly, read these instructions carefully.
Wire rope slings, the hazards surrounding
Recommended loads for wire rope slings Wire rope slings, the hazards surrounding their use, and safety measures or alternatives to avoid injury will be covered in this data sheet. 2. Wire rope made from
H EAD TUBE BASICS. Figure 1 - Head tube, front fork and hardware
H EAD TUBE BASICS Figure 1 - Head tube, front fork and hardware This tutorial will cover some of the basics you need to know when pulling apart the steering system of a bicycle for repair or use on one
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
HOW HYDRAULIC TRUCK CRANES WORK
HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle
Foundation Experts, LLC Specializes in Foundation Repair and Waterproofing
1 Most basements show some signs of leaking and cracking. Through the years, problems with water, poor soils, grading, drainage and possible settling affect the integrity of a basement. Being able to recognize
2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
Series 90 Portable Capstan Hoist. Owners Manual ! CAUTION
Series 90 Portable Capstan Hoist Owners Manual! CAUTION The equipment covered in this document should be installed, used, and serviced only by competent personnel familiar with and following good work
DIY ALL STEEL SHED FRAMES
DIY ALL STEEL SHED FRAMES FAST FIT FRAMES & CONNECTOR PRICES BELOW THE BEST BUILDINGS START WITH A STEEL BUILDING FRAME ALLOW 10-21 WORKING DAYS FROM DATE ORDERED FOR PRODUCTION & SHIPMENT READY PRICES
TRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
Mark Cramer Inspection Services, Inc.
Mark Cramer Inspection Services, Inc. 492 Twentieth Avenue, Indian Rocks Beach, FL 34635-2970 (727) 595-4211 Fax (727) 596-7583 Certified Member #12085 American Society of Home Inspectors Construction
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
Service Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
MPW 060/080E. Walkie Pallet Trucks 6,000 8,000 lbs. MPW-E Walkie Pallet Trucks. 6,000-8,000 lbs. Lift Trucks. Rental Services. Fleet.
MPW 060/080E MPW-E Walkie Pallet Trucks 6,000-8,000 lbs. Truck shown with optional equipment Lift Trucks Rental Services Truck shown with optional equipment Fleet Management Financial Services Gold Service
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
&'( ,,( - 0&( .&( WMSD = Work Related Muscular Skeletal Disorder
Lotsa pounds ! "!!!" #$% &'( )*+ 0&( )*+,,( - )*+.&( /) )*+ WMSD = Work Related Muscular Skeletal Disorder Source: SHARP technical report No. 40-6-2002 #$%+#! Source: American Society of Safety Engineers
M_004 Basic Rigging Safety Lecture
M_004 Basic Rigging Safety Lecture Milton J. Shoup III Mechanical Safety Officer University of Rochester Laboratory for Laser Energetics 1 of 101 Summary Safety is everyone s business and compliance with
In-Track Repair of Concrete Ties. Deland Humpherys, Director Track Mtce
In-Track Repair of Concrete Ties Deland Humpherys, Director Track Mtce Concrete tie repairs: Shoulder repair process Normally the result of a derailment Lag removal and replacement process Broken lags
Force, Work and Energy
Force, Work and Energy Reference Guide Equipment Setup Ropes and Pulleys.................................................................. 1 Investigation Guides A-1 Ropes and Pulleys................................................................
Hollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
When you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier
Simple machines OBJECTIVES When you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier A machine is an invention that makes
Fall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
Working at Heights and Fall Protection
Standard Operating Procedures Working at Heights and Fall Protection Last Modified: JAN 2013 1 of 6 Working at Heights and Fall Protection I Purpose Serious accidents can result from falls. All employees
SAFE USE OF LADDERS AND STEP LADDERS
SAFE USE OF LADDERS AND STEP LADDERS HEALTH & SAFETY UNIT REVIEWS SPRING 2006 CONTENTS 1. INTRODUCTION...1 2. SAFE SYSTEM...1 4. SAFE USE OF LADDERS...3 4.1 Leaning ladders...3 4.2 Extension ladders...3
Do-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow
Do-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow This press can be built from readily available metal. Materials and dimensions need not be exactly what is shown here. Much of the material
Wire Rope Slings SLING LEG OPTIONS WIRE ROPE SLINGS
SLING LEG OPTIONS Standard End Fitting Combinations To order sling legs, choose the correct size from the tables on the following pages. Determine the length needed and specify the end fittings required
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,