Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
|
|
|
- Shannon Boone
- 8 years ago
- Views:
Transcription
1 R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity Maximum lifting height RTH 5.26 S kg (center of gravity 500 mm) 25,76 m Type Mercedes OM 934 LA Stage IV Mercedes OM 904 LA Stage 3A Rated power 129 kw HP at rpm 129 KW HP at rpm Maximum torque 750 Nm at rpm 675 Nm at rpm Displacement 5,13 l 4,25 l Cylinders 4 in line 4 in line Fuel Cooling system Type Model Maximum pressure Displacements Gear box Type Rear axle Diesel direct injection turbocharged Water intercooler Hydrostatic closed loop Bosch Rexroth 500 bar Variable displacement pump electronically controlled. Variable displacement motor 2 speed drop box forward-reverse Axles with epicyclic reduction gear Oscillating and steering with hydraulic locking Front axle Oscillating and steering with automatic levelling +/- 10 Service brake Parking brake Hydraulically activated, oil-immersed in-board multi-disc type on each axle Hydraulic with negative action Tyres dimensions 445/65 R 22,5 Max. travel speed Tractive force at the hook 41 km/h 80 kn Gradeability 42% Turning radius (end of forks) Total unladen Front unladen (boom retracted and lowered) Rear unladen (boom retracted and lowered) mm kg kg kg Fuel tank 180 l 180 l AdBlue 40 l Hydraulic oil tank 220 l 220 l Engine oil tank 20,5 l 16 l Cooling liquid 36 l 36 l Max. operating system pressure 350 bar Circuit type Load sensing Service pump Bosch Rexroth Variable displacement Distributor for boom and turret movements Danfoss Electroproportional valve SIL 2 Distributor for stabilizers Bosch Rexroth Electro-hydraulics controls Movements control 2 joystick Danfoss with two shafts with dead man safety device. Management with CAN bus technology Max. length (boom retracted and lowered) mm (at vertical point of forks foothold) Max. width mm (on wheels) Max. height (boom retracted and lowered) mm (on wheels) Wheel base mm Ground clearance 320 mm EN 13849: concerning the safety of all controls of the machine EN 13000: concerning the standard of hydraulic cranes EN 280: concerning the standard of aerial platforms FOPS/ROPS 97/68/CE: concerning engine emissions standards The data in this brochure are informative and subject to change without notice R R3250 R Magni_Depliant_RTH5-26S_rosso_2015.indd 1-2 GRONINGEN BERLIKUM ALPHEN AD RIJN planning@bultena.nl
2
3
4
5
6
7
8
9
10
11
E08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
ŠKODA Rapid Petrol engines
ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,
Valtra A Series Compact and Orchard models A53 / A63 / A73
Valtra A Series Compact and Orchard models A53 / A63 / A73 Full range of tractors in all size classes Individually Yours 2 Valtra is the one and only tractor manufacturer in the Nordic region. Our roots
Skid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395
![Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395](/thumbs/40/20801881.jpg "Petrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395")
ŠKODA Superb Combi Petrol engines Technical specifications 1.4 TSI/92 kw 1.4 TSI/110 kw ACT 1.4 TSI/110 kw ACT (A) 1.8 TSI/132 kw 1.8 TSI/132 kw (A) 2.0 TSI/162 kw (A) Engine Engine type Cylinders turbocharged
ERIES 9 Z-FAHR S DEUT
DEUTZ-FAHR SERIES 9 The new era of productivity. 2 Unparalleled performance, efficiency and productivity. Deutz Fahr answers once again to the evolving requirements of modern agriculture, which calls
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
Petrol engines. Technical specifications 1.4 MPI/59kW 1.6 MPI/75 kw 1.6 MPI/75 kw Engine
ŠKODA Octavia Tour Petrol engines Technical specifications 1.4 MPI/59kW 1.6 MPI/ kw 1.6 MPI/ kw Engine Engine type petrol engine, in-line, liquid cooling system, DOHC, transverse in front petrol engine,
New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan
AGRICULTURE GARDENING New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan ENGINE Engine Nº of Cylinders Displacement Rated RPM (25) Water Cooled Diesel 1,125 cc 2,500
RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
SPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
Electric Powered Forklift 1.5-2.0 ton
Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3
CX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
Agri Star 37.7 37.8 35.10 38.10
..8. 8. gri Star PERORMNE..8. 8. Maximum capacity (kg)....8 Maximum lifting height (m),,9 9, 9, Maximum horizontal outreach (m),,,, Outreach at maximum height (m),,,8,8 ork swivelling angle Pull-out force
M26 T/30 T M40 T/50 T
M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
RX 60 Technical data.
RX 60 Technical data. Electric forklift trucks RX 60-40 RX 60-45 RX 60-50 Achieve more. RX 60 Technical Data. This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard
UPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE)
UPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE) Body and chassis Three- or five-door, five-seater C-segment hatchback, with all-steel unitary construction bodyshell. Choice of diesel and gasoline
HR46 HARVESTER. Thinning Specialist
HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means
JCB TELESCOPIC WHEELED LOADERS TM310, TM310S, TM220 AND TM180
JCB TELESCOPIC WHEELED LOADERS TM30, TM30S, TM220 AND TM80 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability
TL360 - TL470. Telescopic Handlers
TL360 - TL470 Telescopic Handlers 2 A NEW ERA n A telescopic loader designed around you The new Bobcat TL range of telescopic loaders is designed to excel in the most demanding construction or agricultural
SITE DUMPERS PRODUCT RANGE
SITE DUMPERS PRODUCT RANGE MORE THAN JUST A DUMPER High performance and reliable water cooled diesel engines for smooth and economical operation Large opening service doors for best in class service access
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
With an excellent weight-to-power ratio of 37 kg/hp, the C-L model is ideal for general field work, as well as for PTO and transport applications.
Specially designed for farming applications with state-of-the-art technical solutions, the new Perkins engines meet the Tier 3 emission standards, while providing high power and torque levels with low
PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
RH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
Tabela de Carga: Grove RT 522B - Comercial
Tabela de Carga: Grove RT 522B - Comercial Desenvolvedor autorizado Dimensions 11' 1-3/8" (3387) TAILSWING 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET 8' 5 1/2" (78) 8' 2" (2489) ' 3-3/8" (9229)
Cold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
EXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
New Jeep Cherokee Technical specifications
New Jeep Cherokee Technical specifications Specifications are based on the latest product information available at the time of publication. All dimensions are in millimeters at curb weight and with standard
TRAILER MATE SPECIFICATIONS. TM50 2-Wheel Drive 3-Wheel Drive
TRAILER MATE SPECIFICATIONS TM50 2-Wheel Drive 3-Wheel Drive TABLE OF CONTENTS TM50 2-WD / 3-WD Specifications / Dimensions. 1 General Specifications.... 2 Weights / Travel Speed / Tilt Table Degrees /
LANDPOWER, TIER 3 ENGINES AND ELECTRONIC TRANSMISSION FOR IMPRESSIVE PERFORMANCE.
, TIER 3 ENGINES AND ELECTRONIC TRANSMISSION FOR IMPRESSIVE PERFORMANCE. The new LandPower tractor has been redesigned with the adoption of the new F.P.T. Tier 3 engines and of an electronically-controlled
Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356
Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356 Safety Interlocks in the spreader twistlocks prevent un-intentioned container release; sensors in the lift system prevent
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
Mobile crane LTM 1130-5.1. Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m
Mobile crane LTM 1130-5.1 Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m Mobile Crane LTM 1130-5.1 Flexible and economical to operate 2 LTM 1130-5.1 The Liebherr LTM 1130-5.1
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
FTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
Jeep Renegade Technical specifications
Jeep Renegade Technical specifications Specifications are based on the latest product information available at the time of publication. All dimensions are in millimeters at curb weight and with standard
Engine catalogue. Marine Diesel engines. MAN range - light duty
Engine catalogue Marine Diesel engines MAN range - light duty ENG 10 November 2010 Marine Diesel engines Engine Power Num. of Displacement Design kw cylinders cm3 R6-730 537 6 12,8 inline R6-800 588 6
584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb
584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:
LIFT TRUCKS REACH STACKERS ROBUST, FLEXIBLE AND POWERFUL
LIFT TRUCKS REACH STACKERS ROBUST, FLEXIBLE AND POWERFUL REACHING HIGH TEREX REACH STACKERS Terex Port Solutions (TPS) offers a comprehensive portfolio of logistics solutions and state-of-the-art cargo
ALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42' 0" (12 795)
221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00
221E ARTICULATED WHEEL LOADER TIER III CERTIFIED I SERIES 3 ENGINE Model Case 432T/M3 Type 4-stroke Cylinders 4 Bore/Stroke 3.89 in x 4.09 in (99 X 104 mm) Displacement 195 in 5 (3.2 L) Fuel injection
Built with you in mind.
NEXOS F FB VL VE Ready for anything. Built with you in mind. When it comes to narrow-width tractors, customers are very discerning and their needs are highly specific. Since plantations, operators and
The folding ROPS, available on the platform version, allows the operators to manoeuvre with ease when space is at a premium.
Available in the V (T3) series for vineyards and the F-N (T3) series for narrow orchards, this ultra-compact tractor range has been redesigned to offer improved gearbox controls, a new steering wheel with
Bælte-lifte Crawlerlifts
Bælte-lifte Crawlerlifts PrisListe 2015 TRACKED PLATFORMS - 2 - EASY LIFT R130 Max. working height: 12.20 m Max. working outreach (200 kg): 06.50 m Turntable rotation: 320 Aluminium basket 1100x700x1100
CAST GROUP s.r.l. Listino Prezzi Price List
CAST GROUP s.r.l. Listino Prezzi Price List Aggiornato al 01/06/2009 PIXY THE ARTICULATED TOOL-CARRIER & COMPACT LOADER CAST GROUP s.r.l. Via Taglio Sinistro 63/B 30035 Mirano (Venezia) Italia Tel 041/5701827
The compact all-rounder 4055 KOMPAKT S 4065 KOMPAKT S 4085 KOMPAKT 4095 KOMPAKT 4105 KOMPAKT. www.steyr-traktoren.com BETTER TRACTORS.
The compact all-rounder 4055 KOMPAKT S 4065 KOMPAKT S 4085 KOMPAKT 4095 KOMPAKT 405 KOMPAKT www.steyr-traktoren.com BETTER TRACTORS. Our PROFIT. Our FUTURE. Our Steyr. 03 Introduction 04 05 CAB and controls
303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
Technical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
VOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
Service Manual Part No. 62401 Rev A1 October 2004
Service Manual Part No. 62401 Rev A1 October 2004 Introduction First Edition First Printing Important Read, understand and obey the safety rules and operating instructions in the Genie S-100 and Genie
HYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
Information and Instructions
Information and Instructions This shop manual contains several sections each covering a specific group of wheel type tractors. The Tab Index on the preceding page can be used to locate the section pertaining
Diesel and gas engine systems for EURO VI on-highway applications
Diesel and gas engine systems for EURO VI on-highway applications Mercedes-Benz engines in the OM 93X and OM 47X model series. Outstanding design and efficiency. Specifically developed to comply with the
The CLARK GTS is fitted with a powerful and economical diesel engine or LPG engine.
Diesel / LG The CLARK GTS is fitted with a powerful and economical diesel engine or LG engine. Automotive-style ergonomics Tiltable steering column The tiltable steering column can be adjusted to the driver's
VOLVO WHEEL LOADERS L20F, L25F
VOLVO WHEEL LOADERS L20F, L25F ON TO YOUR NEXT PERFORMANCE. The Volvo L20F and L25F compact wheel loaders are built to give your productivity a needed lift. The right power. The right performance. It s
11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire
R Pneumatic Diesel Forklift Trucks D110/130/160S-5 11,000kg to 16,000kg Capacity D110 / 130 / 160S-5 11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire Printed in Repubic of Korea PSC2604D0(Feb.2007)
7. Technical specifications. BMW 116i 3-door.
Page 30 7. Technical specifications. BMW 116i 3-door. BMW 116i 3-door Body No. of doors/seats 3 / 4 (5) Length/width/height 1) (unladen) mm 4329 / 1765 / 1421 Wheelbase mm 2690 Track, front/rear mm 1535
304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS
VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS The comfortable way to get into tight spaces. When your job takes you to an area where space is at a premium, turn to the Volvo ECR58 Plus and ECR88 Plus.
D0834 LOH Performance diagrams. D0834 LOH Technical data. Engines. 162 kw 151 kw 132 kw. 162 kw. 151 kw 132 kw
D0834 LOH D0834 LOH Performance diagrams Engines Piston displacement 4.6 liter bore 108 mm stroke 125 mm Power output for EURO 3, EURO 4, EURO 5 and EEV Emission standard EEV EURO 5 EURO 4 EURO 3 Engine
KUBOTA DIESEL ZERO-TURN MOWER ZD21/ZD28. Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency.
R KUBOTA DIESEL ZERO-TURN MOWER ZD ZD21/ZD28 Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency. For you, cutting the grass is simply not a weekend chore. It s your business. The
304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib
129 kw - 173 hp 19800-21900 kg
BASE ENGINE POWER OPERATING WEIGHT 129 kw - 173 hp 19800-21900 kg WE210 NEW HOLLAND STAGE IIIA ENGINE - Powerful with high torque at lower speed - High productivity with lower pollution HIGH PERFORMANCE
Specifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
NEW HOLLAND T5OOO T5O5O T5O6O T5O7O
NEW HOLLAND T5OOO T5O5O T5O6O T5O7O T5OOO. A PERFECT MATCH BETWEEN PROVEN TECHNOLOGY AND MODERN ENGINEERING Powered by New Holland NEF Tier III compliant intercooled engines, New Holland T5000 tractors
1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
Cat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM
VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA. www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 1 T-SERIES BACKHOE LOADER The family gets wider: The 570T makes available all the well known CASE
Kubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
C18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
New criteria of forklift trucks
Dimension Specification Identification 1.1 Manufacturer 1.2 Manufacturer s type designation 35D7E 40D7E 45D7E 50D7AE 1.3 Drive: electric (battery or mains),diesel,petrol,fuel gas,manual 1.4 Type of operation:hand,pedestrian,standing,,orderpicker
17/09/2004. Engine. Weight Kerb weight: 1528 kg (AWD 1604 kg) Max total weight: 2150 kg (AWD 2200 kg)
Volvo V70 Page 1 of 5 Engine Petrol s Five cylinders. Double overhead camshafts, 20 valves. Continuously variable valve timing (CVVT) on the inlet side (s without turbo), exhaust side (s with turbo) or
New Holland T7.270 Auto Command
Datasheet DLG PowerMix New Holland T7.27 Auto Command Applicant New Holland Agricultural Equipment SpA Via Plava 8 I-1135 Torino www.newholland.com Test performed by DLG e.v. Test Center Technology and
8.70 m. Loading and cleaning machine. Technical innovation
Class Leaders Loading and cleaning machine Technical innovation Effective cleaning Careful handling of beets Tremendous load-carrying capacity Very high user-safety The euro MAUS has been greatly improved
HBM NOBAS. www.hbm-nobas.de
www.hbm-nobas.de BG 240 T-4 (6 x 4) / BG 240 TA-4 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the most powerful graders worldwide.
Kobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
1013 E. The engine for agricultural equipment.
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55 WORKMASTER Tractors Dependable power Available in 39 and 47 PTO horsepower, WORKMASTER tractors offer reliable power to handle a wide variety of chores.
Appendix A1- Technical Specifications
Appendix A1- Technical Specifications 1. INTENDED USE 1.1. THE REACHSTACKERS (R.S) WILL BE USED AT ISR's sites THE R.S WILL BE USED FOR HANDLING OF 20' - 40' ISO CONTAINERS IN CONFINED AREAS WITH LIMITED