Needle Valves. NB, NBH, ND, NDH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series.
|
|
- Eustacia Miller
- 7 years ago
- Views:
Transcription
1 Needle Valves NB, NBH, N, NH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series
2 ontents Bar Stock Needle Valves NB Series and NBH Series Nonrotating-stem Needle Valves N Series and NH Series 1 Forged Needle Valves NF Series and NFH Series General Purpose Needle Valves NG Series and NGH Series 11 1 Rising Plug Valves NR Series and NRG Series Toggle Valves NT Series 24 Union Bonnet Needle Valves NU Series and NUH Series 2 Outside Screw and Yoke (OS&Y) Needle Valves NY Series and NYH Series 31 3
3 Bar Stock Needle Valves NB Series: Working pressure up to NBH Series: Working pressure up to psig 1 psig Needle Valves 1 Features old drawn bar. Two-stem design: thread hardened upper stem and smooth surface hardened lower stem. Upper stem thread lubricant isolated from system media. Linearly instead of helical movement of the nonrotating lower stem, avoiding galling damage to the seat and tip, as well as reducing the total friction area between the packing and thelower stem. Safety back seating seal in fully open position. Panel mounting available. Steady and durable fastening of the handle by double lock-pins. Handle color options are available. Pressure vs. Temperature NB Series Pressure (psig) Alloy 4 Brass 149 Titanium Temperature ( ) 31 SS Alloy Temperature ( F) Pressure (bar) Pressure (psig) Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure, but not higher than psig. Working pressure up to: NB Series : psig (414 bar) Alloy -2: psig (414 bar) Alloy 4: 5 psig (345 bar) Titanium: 35 psig (241 bar) Brass: 3 psig (2 bar) NBH Series : 1 psig (9 bar) Working temperature: PTFE: -5 F to 45 F(-54 to 232 ) PEEK: -5 F to 5 F (-54 to 2 ) Graphite: -5 F to 12 F (-54 to 49 ) NBH Series Temperature ( ) L SS 31 SS Temperature ( F) Pressure (bar) 1. Graphs are based on graphite stem packing. 2. Soft suitable for NB series only, 2 F (93 ) max. with PTFE stem tip (soft tip). 3. ontact the authorized representative or FITOK Group for curve graph of other materials.
4 2 Needle Valves Flow ata at 1 F (3 ) Regulating Stem Flow oefficient (v) Standard Materials of onstruction Orifice.25" (.4 mm) Orifice.1"(4. mm) 4 5 Numbers of Turns Open Orifice.1" (1. mm) Orifice.59" (15. mm) Orifice.39" (1. mm) Panel Mounting Stem Type 1a 1b 1c 1d NB Series Panel Mounting 4 Taper Regulating Ball Soft NBH Series Item omponent Valve Body Material 31 SS Alloy 4 Titanium Alloy -2 Brass Handle Anodized aluminum or stainless steel or black knob Set Screw Packing Bolt Upper Stem Lock Nut 34 SS/A2 Brass 3/B1 Bonnet 31 SS/A49 Alloy 4/B14 Titanium Gr 4/B34 Alloy -2/B54 Brass 3/B1
5 Needle Valves 3 Item omponent Panel Nut Gland Lock Pin Screw Spring Washer Bush Lubricant Valve Body Material 31 SS Alloy 4 Titanium Alloy -2 Brass Brass 3/B1 9 Packing PTFE or PEEK or graphite 1a 1b hrome-plated 1c Lower Stem Alloy 4/B14 Titanium Gr 4/B34 Alloy -2/B54 1d 11 Body 31 SS/A49 Alloy 4/B14 Titanium Gr 4/B34 Alloy -2/B54 Seat Same as Body Molybdenum disulfide-based hrome-plated Brass 3/B1 1. Item 12 is applied in valves with orifice size 4. &.mm. For valves with orifice size 1., 15. & 1. mm, item 13, 14 & 15 are used instead of item ontact the authorized representative or FITOK Group for valves of other materials. imensions Straight Pattern Angle Pattern H (Open) F (Max. Panel Thickness) L1 L2 G-Panel hole drill E H1 (Open) F (Max. Panel Thickness) G-Panel hole drill L4 E1 1 L3 imensions of NB Series NB series valves are standard without panel mounting. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NBSS-FNS2--Y Basic Ordering Number NB -FNS2- NB -FNS4- NB -NS4- NB -NS- NB -FL4- NB -ML- NB -ML- onnection Type and Size 1/ Female NPT 1/ Female NPT 1/4 Male NPT 1/4 Male NPT 3/ Male NPT 3/ Male NPT 1/4" FITOK 1/4" FITOK mm FITOK mm FITOK mm FITOK mm FITOK Orifice in.(mm) v.1 (4.).35 imension, in.(mm) L1 L2 L3 L4 1 E E1 F G H H1 1. (25.4) 1. (2.9) 1.3 (2.2) 1.19 (3.2) 1.2 (3.5) 1. (25.4) 1. (2.9) 1.3 (2.2) 1.19 (3.2) 1.2 (3.5) 1. (25.4) 1. (2.9) 1.2 (3.5).5 (14.3) 1. (2.9) 1.2 (3.5).5 (12.).5 (12.) 2.1 (55).4 (21.4).4 (21.4).25 (.4). (19.) 2.5 (2.4) 2.5 (2.4) (22.5) NB -FL- 1/2'' FITOK 1/2'' FITOK (3.) (3.) (3.1) (3.1)
6 4 Needle Valves imensions of NB Series Basic Ordering Number NB -ML1- NB -ML12- NB -ML14- NB -TS--G NB -TS--G NB -MTS12--G NB -MTS14--G NB -MTS1--G NB -MTB14--G NB -MTB1--G NB -UMB14- NB -UMB1- NB -MS2- NB -MS22- NB -FNS-9 NB -FNS12-9 NB -NS12-9 NB -FL12-9 NB -ML14-9 NB -ML1-9 NB -ML1-9 NB -MTS14-9-G NB -MTS1-9-G NB -TS12-9-G NB -MTB14-9-G NB -MTB1-9-G NB -UMB14-9 NB -MS2-9 NB -FNS12- NB -TS1--G NB -MTS25--G NB -MTS2--G NB -PS12--G NB -ML22- NB -FNS1- NB -MTS25--G NB -TS1--G NB -MTS2--G NB -PS12--G NB -PS1--G onnection Type and Size 1 mm FITOK 12 mm FITOK 14 mm FITOK 3/" TS 1/2" TS 12 mm MTS 14 mm MTS 1 mm MTS 14 mm MTB 1 mm MTB 14 mm UMB 1 mm UMB M2 x 1.5 Male Metric M22 x 1.5 Male Metric 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT 3/4" FITOK 14 mm FITOK 1 mm FITOK 1 mm FITOK 14 mm MTS 1 mm MTS 3/4" TS 14 mm MTB 1 mm MTB 14 mm UMB 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT 3/4" FITOK 14 mm FITOK 1 mm FITOK 1 mm FITOK 14 mm MTS 1 mm MTS 3/4" TS 14 mm MTB 1 mm MTB 14 mm UMB M2 x 2 Male Metric M2 x 2 Male Metric 3/4 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 22 mm FITOK 1 Female NPT 25 mm MTS 1" TS 2 mm MTS 3/4 PS 1 PS 1 mm FITOK 12 mm FITOK 14 mm FITOK 3/" TS 1/2" TS 12 mm MTS 14 mm MTS 1 mm MTS 14 mm MTB 1 mm MTB 14 mm UMB 1 mm UMB M2 x 1.5 Male Metric M22 x 1.5 Male Metric 3/4 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 22 mm FITOK 1 Female NPT 25 mm MTS 1" TS 2 mm MTS 3/4 PS 1 PS Orifice in.(mm).25 (.4).39 (1.).59 (15.).1 (1.) v (44.5) 1.9 (5.) 1.5 (44.5) 1.9 (5.) (44.5) (44.5) 1.3 (41.3) 1.5 (3.1) 1.1 (41.) 1.5 (3.1) 1.1 (41.) (5.) (5.) (39.) (39.) (44.5) (29.) 1.5 (44.5) 2.35 (59.) 1.5 (44.5) 2.35 (59.) 1.5 (44.5) 2.35 (59.) 1.5 (44.5) 2. (51.).5 (14.3) 1.14 (29.) (5.) (5.) (31.5) imension, in.(mm) L1 L2 L3 L4 1 E E1 F G H H (33.) (33.) (3.1) 1.52 (3.) (39.) (3.1) 1.52 (3.) (39.) (2.) (2.) 1.5 (3.1) 1.5 (3.1) (4.1) (4.1) (3.1) (3.1) 1.42 (3.1) (2.) 1.5 (3.1) 1.42 (3.1) (2.) 1.5 (3.1).5 (14.3) (22.2) (19.5) (.9) (34.9) (31.5) (9.).3. (22.2) 2.5 (3.5) 5. (12) 5.5 (14) 1. (25.4) 1. (43.2). (22.5) 1.43 (3.4).3 (9.).3 (9.).9 (24.4) (2.5) (14.) (11.) FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket + metric bulge nipple, PS means pipe socket weld. 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing material due to the high temperature when welding. 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 4. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group. 1.2 (32.5) 3.5 (.9) 5. (12) 5.2 (132) 3.5 (.9) 4.2 (12)
7 Needle Valves 5 Straight Pattern Angle Pattern H (Open) F (Max. Panel Thickness) G-Panel hole drill H (Open) F (Max. Panel Thickness) G-Panel hole drill E L1 E L1 L2 L2 NBH series valves are standard without panel mounting. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NBHSS-FNS2--Y imensions of NBH Series Basic Ordering Number onnection Type and Size Orifice in.(mm) v imension, in.(mm) L1 L2 E F G H NBH -FNS2-1/ Female NPT 1/ Female NPT NBH -FNS4 - NBH -NS4- NBH -FNS4 -NS4- NBH -FL4- NBH -TS4 --G NBH -FNS4 - NBH -FNS - NBH -NS- 1/4 Male NPT 1/4" FITOK 1/4" FITOK 1/4" TS 1/4" TS 3/ Female NPT 3/ Male NPT NBH -FNS -9 1/2 Female NPT 1/4 Male NPT 1/4 Male NPT 3/ Female NPT 3/ Male NPT 1/2 Female NPT.15 (4.).23 (.4).39 (1.) (2.) 1.41 (35.) (2.) 1.31 (33.4) (39.) (2.) 1.41 (35.) (2.) 1.31 (33.4) (39.).53 (13.5) 2.1 (55).25 (15.) (3.5) (13.5) (.4) (15.).3 (9.).5 (22.2) (.9) 3.5 (22.2).5 (9.).3.9 (24.4) (2.5) (2.) (.9) (32.5) 4.1 (1) 1. FITOK means FITOK double ferrule tube fittings,ts means fractional tube socket weld. 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing material due to the high temperature when welding. 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 4. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above,please contact the authorized representative or FITOK Group
8 Needle Valves Part Number escription Series Body Material Type NB NBH SS L S4 4L S TI A2 M IN H B S 31 SS 31L SS 34 SS 34L SS 321 SS F91 F92 uplex 225 Titanium Alloy 2 Alloy 4 Alloy Alloy -2 Brass arbon Steel 94L 94L SS FNS NS FRT RT FMS MS FRP BP TS MTS TB MTB PS PB FL ML UFB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Socket Weld Metric Tube Socket Weld Fractional Tube Butt Weld Metric Tube Butt Weld Pipe Socket Weld Pipe Butt Weld Fractional Tube Fitting Metric Tube Fitting Nut + Gasket +Fractional Bulge Nipple UMB Nut + Gasket + Metric Bulge Nipple Size 2 1/" 4 1/4" 3/ or mm " 1/ 2" or mm mm 3/4 " or 12 mm 14 mm or M14 x " or 1 mm 1 1 mm /4" or 2 mm or M2 x mm or M22 x 1.5 M24 x mm 2 M2 x mm NBSS - FL - ML12 - WB - GYM - ASF2 Type Size Orifice Size Tip Material Stem Type Packing Material Panel Mounting Handle Flow Pattern Special Application leaning and Packaging Same as Specify in the same way as inlet Type and inlet Size 9.1" (4. mm).25" (.4 mm).39" (1 mm).59" (15 mm).1" (1 mm) Only NB series W Stellite 5 TI A2 M IN H Same as Body uplex 225 Titanium Alloy 2 Alloy 4 Alloy Alloy -2 R T K P G Taper B Ball PTFE PEEK Soft Tip- PTFE Soft Tip- PTFE Graphite Regulating No Y Yes F A Red Aluminum Bar Green Aluminum Bar J Blue Aluminum Bar M Black Aluminum Bar 321 Stainless Steel Bar O Black Knob Straight Angle S lass 2 lass 3 F2 NAE MR15 lassification for Nuclear Facility Application N2 N3 NO F-1 F-2 Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. Standard thread pitch for metric threads are as follows: M1 and below: 1 mm M12 to M24: 1.5 mm M2 and above: 2 mm 2. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level.
9 Nonrotating-stem Needle Valves N Series: Working pressure up to NH Series: Working pressure up to 3 psig 5 psig Needle Valves Features One-piece forged body. Straight and angle pattern. ompact design. Non-rotating stem. Specially designed handle to stop contamination from entering into the valve. Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure. Working pressure up to: N Series : 3 psig (2 bar) Brass: 3 psig (2 bar) NH Series : 5 psig(345 bar) Working temperature for stem tip: PTFE stem tip: -2 F to 2 F (-2 to 93 ) PEEK stem tip: -2 F to 45 F (-2 to 232 ) Pressure vs. Temperature Working temperature for O-ring: Fluorocarbon FKM : -2 F to 4 F (-2 to 24 ) Buna N : -2 F to 212 F (-2 to 1 ) Ethylene Propylene: -2 F to 3 F (-2 to 14 ) N Series Pressure (psig) Temperature ( ) Brass Alloy Temperature ( F) 31 SS 5 1. The graphs are based on PEEK stem tip and Fluorocarbon O-ring. 2. ontact the authorized representative or FITOK Group for curve graph of other materials Pressure (bar) Pressure (psig) NH Series Temperature ( ) SS Temperature ( F) Pressure (bar) Flow ata at 1 F (3 ) Flow oefficient (v) Orifice." (2. mm) Numbers of Turns Open Orifice.22" (5. mm) Orifice.1" (4. mm)
10 Needle Valves Standard Materials of onstruction Item omponent Handle Stop Pin Spool Set Screw Packing Bolt O-ring Washer 9 Backup Ring Stem Stem Tip Body Lubricant 31 SS 34 SS 34 SS/A2 Valve Body Material 321 SS Anodized aluminum Aluminum 321 SS/A2 PTFE/11 Fluorocarbon FKM, Buna N or Ethylene propylene PTFE or PEEK 31 SS/A12 31 SS/A12 31 SS/A12 Molybdenum disulfide-based Brass Brass 3/B1 Brass 3/B23 Alloy 4 Alloy 4/B14 Alloy 4/B14 Alloy 4/B14 Alloy 4/B54
11 Needle Valves 9 imensions Straight Pattern Angle Pattern H (Open) H (Open) L1 L2 L1 L2 Basic Ordering Number N -NS2-5 N -NS2-FL2-5 N -FL2-5 N -ML3-5 onnection Type and Size 1/ Male NPT 1/ Male NPT 1/" Male NPT 1/" Male NPT 1/" FITOK 1/" FITOK 3 mm FITOK 3 mm FITOK Orifice in.(mm). (2.) v.12 imension, in.(mm) L1 L2 H.1 (2.) 1.1 (2.9).1 (2.) 1.1 (2.9).32 (.1) 1. (2.9) 1. (4.2) N -FNS2- N -NS4- N -NS4-FL4- N -FL4- N -ML- N -ML- N -FNS4- N -NS- N -FL- N -FL- N -ML1- N -ML12- NH -NS2-5 NH -FL2-5 NH -ML3-5 NH -NS4- NH -FL4- NH -ML- 1/ Female NPT 1/4 Male NPT 1/4" Male NPT 1/4" FITOK mm FITOK mm FITOK 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 1/ Male NPT 1/" FITOK 3 mm FITOK 1/4" Male NPT 1/4" FITOK mm FITOK 1/ Female NPT 1/4 Male NPT 1/4" Male NPT 1/4" FITOK mm FITOK mm FITOK 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 1/ Male NPT 1/" FITOK 3 mm FITOK 1/4" Male NPT 1/4" FITOK mm FITOK.1 (4.).22 (5.). (2.).1 (4.) ( 25.) (2.) 1.1 (3.) 1. (2.9) 1.12 (2.) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.).1 (2.) 1.1 (2.9).9 (25.) (2.).9 ( 25.) (2.) 1.1 (3.) 1. (2.9) 1.12 (2.) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.).1 (2.) 1.1 (2.9).95 (25.) (2.).39 (1.).53 (13.5).32 (.1).39 (1.) 1. (2.9) 1.12 (2.4) 1. (2.9) 1. (2.9) 1. (4.2) 2.2 (51.3) 1. (4.2) 1.9 (5.2) 1. FITOK means FITOK double ferrule tube fittings. 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 3. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group.
12 1 Needle Valves Part Number escription Series Body Material Type N SS 31 SS FNS Female NPT NH L 31L SS NS Male NPT S4 34 SS FRT Female BSPT 4L 34L SS RT Male BSPT S1 M B 321 SS Alloy 4 Brass FL ML Fractional Tube Fitting Metric Tube Fitting Size 2 1/" 4 1/4" 3/ " or mm 1/ 2 or mm " 1 1 mm mm NSS - FNS4 - ML - PE - ASF2 Type Size Orifice Size Tip Material O-ring Material Flow Pattern NAE MR15 leaning and Packaging Same as Specify in the same way as inlet type and inlet size 5 (2.. " mm).1 " (4. mm).22 " (5. mm) Only N Series PTFE P PEEK B E FKM Buna-N Ethylene propylene A Straight Angle S No Yes F2 F-1 F-2 Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. Standard thread pitch for metric threads are as follows: M1 and below: 1 mm M12 to M24: 1.5 mm M2 and above: 2 mm Standard thread pitch should be ignored in the ordering number, others should be specified. 2. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level.
13 Forged Needle Valves NF Series: Working pressure up to NFH Series: Working pressure up to psig 1 psig Needle Valves 11 Features One-piece forged body. Two-stem design: thread hardened upper stem and smooth surface hardened lower stem. Upper stem thread lubricant isolated from system media. Linearly instead of helical movement of the nonrotating lower stem, avoiding galling damage to the seat and tip, as well as reducing the total friction area between the packing and the lower stem. Panel mounting available as an option. Steady and durable fastening of the handle by double lock-pins. Handle color options are available Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure, but not higher than psig. Working pressure up to: NF Series : psig (414 bar) Alloy -2: psig (414 bar) Alloy 4: 5 psig (345 bar) Titanium: 35 psig (241 bar) Brass: 3 psig (2 bar) NFH Series : 1 psig (9 bar) Working temperature: PTFE: -5 F to 45 F (-54 to 232 ) PEEK: -5 F to 5 F (-54 to 2 ) Graphite: -5 F to 12 F (-54 to 49 ) Pressure vs. Temperature NF Series NFH Series Pressure (psig) Brass Temperature ( ) 31 SS F91 Temperature ( F) F Pressure (bar) Pressure (psig) Temperature ( ) 31 SS 31L SS Temperature ( F) Pressure (bar) 1. Graphs are based on graphite stem packing. 2. Suitable for NF series only, 2 F (93 ) max. with PTFE stem tip (soft tip). 3. ontact the authorized representative or FITOK Group for curve graph of other materials.
14 12 Needle Valves Flow ata at 1 F (3 ) Regulating Stem Flow oefficient (v) Orifice.25" (.4 mm) Orifice.1" (4. mm) Numbers of Turns Open Orifice.1" (1.mm) Orifice.59" (15. mm) Orifice.39" (1. mm) Standard Materials of onstruction Panel Mounting Stem Type 1a 1b 1c 1d Taper Regulating Ball Soft Item a 1b 1c 1d omponent Handle Set Screw Packing Bolt Upper Stem Lock Nut Panel Nut Gland Packing Packing Washer Lower Stem Valve Body Material 31 SS F91 Anodized aluminum or stainless steel or black knob PTFE or PEEK or graphite hrome-plated Brass 34 SS/A2 F91/A12 Brass 3/B1 12/A1 Brass 3/B1 12/A1 Brass 3/B1 Brass 3/B1 Brass 3/B1 11 Body Seat 31 SS/A12 Same as Body F91/A12 Brass 3/B23 Lubricant Molybdenum disulfide-based
15 Needle Valves 13 imensions Straight Pattern Angle Pattern H (Open) F - Panel Thickness G - Panel Hole rill E H (Open) F - Panel Thickness G - Panel Hole rill L1 E L1 L2 L2 imensions of NF Series NF series valves are standard without panel mounting. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NFSS-FNS2--Y Basic Ordering Number NF -FNS2- NF -FNS4- NF -FL4- NF -ML- NF -ML- onnection Type and Size 1/ Female NPT 1/4" FITOK mm FITOK mm FITOK 1/ Female NPT 1/4" FITOK mm FITOK mm FITOK NF -NS4-1/4 Male NPT 1/4 Male NPT NF -NS- NF -FO4- NF -FR4- NF -FNS4- NF -FNS- NF -NS- NF -FL- NF -ML1- NF -ML12- NF -ML14- NF -FNS- NF -NS- NF -FL- NF -TS--G NF -TS--G NF -MTS12--G NF -MTS14--G NF -MTS1--G NF -MTB14--G NF -MTB1--G NF -UMB14- NF -UMB1- NF -FO- NF -FR- NF -MS2-3/ Male NPT 1/4" Male FO 1/4" Male FR 3/ Female NPT 3/ Male NPT 3/" FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK 1/2 Female NPT 1/2 Male NPT 1/2'' FITOK 3/" TS 1/2" TS 12 mm MTS 14 mm MTS 1 mm MTS 14 mm MTB 1 mm MTB 14 mm UMB 1 mm UMB 1/2" Male FO 1/2" Male FR M2 x 1.5 Male Metric 3/ Male NPT 1/4" Male FO 1/4" Male FR 3/ Female NPT 3/ Male NPT 3/" FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK 1/2 Female NPT 1/2 Male NPT 1/2'' FITOK 3/" TS 1/2" TS 12 mm MTS 14 mm MTS 1 mm MTS 14 mm MTB 1 mm MTB 14 mm UMB 1 mm UMB 1/2" Male FO 1/2" Male FR M2 x 1.5 Male Metric Orifice in.(mm).1 (4.).25 (.4) v.35.5 L1 1. (25.4) 1.3 (2.2) 1.22 (3.9) (2.) (2.) 1.44 (3.5) 1.53 (3.9) (39.) 1.2 (32.) 1.5 (3.1) 1.53 (3.9) (2.) 1.5 (3.1) 2.92 (4.1) (2.) (39.) L2 1. (25.4) 1.3 (2.2) 1.22 (3.9) (2.) (2.) 1.44 (3.5) 1.53 (3.9) (39.) 1.2 (32.) 1.5 (3.1) 1.53 (3.9) (2.) 1.5 (3.1) 2.92 (4.1) (2.) (39.) H (2.5) (31.5) (31.5) (2.2) (2.2) 1.42 (3.1) 1.42 (3.1) 3.3 (5.) imension, in.(mm) 2.1 (55) 2.5 (3.5) E F G.53 (13.5).2 (15.). (19.4).2 (15.).1 (1.). (22.).25 (.4).3 (9.). (19.).9 (24.4)
16 14 Needle Valves imensions of NF Series Basic Ordering Number NF -FNS-9 NF -FNS12-9 NF -NS-9 NF -NS12-9 NF -FL12-9 NF -ML14-9 NF -ML1-9 NF -ML1-9 NF -ML2-9 NF -MTS14-9-G NF -MTS1-9-G NF -MTS1-9-G NF -TS12-9-G NF -PS-9-G onnection Type and Size Orifice in.(mm).25 NF -MS22- M22 x 1.5 Male Metric M22 x 1.5 Male Metric (.4).5 NF -MTB1-9-G NF -UMB14-9 NF -UMB1-9 NF -FO12-9 NF -FR12-9 NF -MS2-9 NF -FNS12- NF -TS1--G NF -MTS25--G NF -MTS2--G NF -PS12--G NF -PB12--G NF -FL12- NF -FL1- NF -ML2- NF -ML22- NF -ML25- NF -FNS1- NF -TS1--G NF -MTS25--G NF -MTS2--G NF -PS12--G NF -PB1--G 1/2 Female NPT 3/4 Female NPT 1/2 Male NPT 3/4 Male NPT 3/4" FITOK 14 mm FITOK 1 mm FITOK 1 mm FITOK 2 mm FITOK 14 mm MTS 1 mm MTS 1 mm MTS 3/4" TS 1/2 PS 1 mm MTB 14 mm UMB 1 mm UMB 3/4" Male FO 3/4" Male FR M2 x 2 Male Metric 3/4 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 3/4 PB 3/4" FITOK 1" FITOK 2 mm FITOK 22 mm FITOK 25 mm FITOK 1 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 1 PB 1/2 Female NPT 3/4 Female NPT 1/2 Male NPT 3/4 Male NPT 3/4" FITOK 14 mm FITOK 1 mm FITOK 1 mm FITOK 2 mm FITOK 14 mm MTS 1 mm MTS 1 mm MTS 3/4" TS 1/2 PS 1 mm MTB 14 mm UMB 1 mm UMB 3/4" Male FO 3/4" Male FR M2 x 2 Male Metric 3/4 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 3/4 PB 3/4" FITOK 1" FITOK 2 mm FITOK 22 mm FITOK 25 mm FITOK 1 Female NPT 1" TS 25 mm MTS 2 mm MTS 3/4 PS 1 PB.39 (1.).59 (15.).1 (1.) v (39.) 1.9 (5.) (39.) 2.9 (5.) (39.) 1.9 (5.) 2.35 (59.) 1.9 (5.) (39.) 1.9 (5.) (39.) 2.9 (5.) (39.) 1.9 (5.) 2.35 (59.) imension, in.(mm) L1 L2 H E F G (3.1) (3.1) (5.) (3.5) (15.) (22.) (9.) (24.4). (22.5). (22.5) 3. (9.) 5. (12) (5.) (135.4) 1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings, TS means fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket + metric bulge nipple, PS means pipe socket weld, PB means pipe butt weld. 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing material due to the high temperature when welding. 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 4. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group. 3.5 (.9) 5. (12) 5. (12). (19.4). (22.5). (19.4) 1. (2.5) 1. (2.5) 1.1 (2.3) 1.1 (41.) 1.1 (41.).3 (9.).3 (9.).3 (9.) 1. (2.5) 1.45 (3.) 1.45 (3.)
17 Needle Valves 15 Straight Pattern Angle Pattern H (Open) F - Panel Thickness G - Panel Hole rill E H (Open) F - Panel Thickness G - Panel Hole rill L1 E L1 L2 L2 NFH series valves are standard without panel mounting. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NFHSS-FNS2--Y imensions of NFH Series Basic Ordering Number onnection Type and Size Orifice in.(mm) v imension, in.(mm) L1 L2 H E F G NFH -FNS2- NFH -FNS4- NFH -NS4- NFH -FNS4-NS4- NFH -FL4- NFH -TS4--G 1/ Female NPT 1/ 4 Female NPT 1/ 4 Male NPT 1/ 4 Female NPT 1/ 4" FITOK 1/ 4" TS 1/ Female NPT 1/4 Male NPT 1/4 Male NPT 1/4" FITOK 1/4" TS.1 (4.) (25.4) 1. (2.2) 1.22 (3.9) 1. (2.2) 1.41 (35.) 1. (2.2) 1. (25.4) 1. ( 2. 2) 1.22 ( 3.9) 1.22 ( 3.9) ( 35.) 1. ( 2. 2) 2.5 (2.5) 2.1 (55.).2 (15.). ( 19.4). 25 (. 4). ( 19. ) NFH -FNS4- NFH -FNS- NFH -NS- 1/ 4 Female NPT 3/ Female NPT 3/ Male NPT 3/ Female NPT 3/ Female NPT.25 (.4) (2.) 1.5 (3.1) ( 2. ) 1.5 (3.1) 3.3 ( 5. ) 2. 5 ( 3. 5). (19.4). ( 22. ). 3 ( 9. ). 9 ( 24. 4) 1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld. 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing material due to the high temperature when welding. 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 4. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group.
18 1 Needle Valves Part Number escription Series Body Material Type NF SS 31 SS FNS Female NPT NFH L S4 4L S TI A2 M IN H B S 31L SS 34 SS 34L SS 321 SS F91 F92 uplex 225 Titanium Alloy 2 Alloy 4 Alloy Alloy -2 Brass arbon Steel 94L 94L SS NS FRT RT FMS MS FRP BP TS MTS TB MTB PS PB FL ML UFB Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Socket Weld Metric Tube Socket Weld Fractional Tube Butt Weld Metric Tube Butt Weld Pipe Socket Weld Pipe Butt Weld Fractional Tube Fitting Metric Tube Fitting Nut + Gasket + Fractional Bulge Nipple UMB FO FR Nut + Gasket + Metric Bulge Nipple FO Fitting FR Fitting Size 2 1/ " 4 1/4" 3/ or mm " 1/ 2 or mm " 1 1 mm /4 " or 12 mm 14 mm or M14 x " 1 mm or 1 1 mm /4" or 2 mm or M2 x mm or M22 x M24 x mm 2 M2 x mm NFS4 - TS1 - MTS25 - WR - GYM - ASF2 Type Size Orifice Size Tip Material Stem Type Packing Material Panel Mounting Handle Flow Pattern Special Application leaning and Packaging Same as Specify in the same way as inlet type and inlet size 9.1 " (4. mm).25 " (.4 mm).39 " (1 mm).59 " (15 mm).1 " (1 mm) Only NF series 5 TI A2 M IN H Same as Body W Stellite uplex 225 Titanium Alloy 2 Alloy 4 Alloy Alloy -2 R B Ball T K Taper Regulating Soft Tip- PTFE Soft Tip- PTFE P PTFE PEEK G Graphite Y No Yes F A Straight Angle Red Aluminum Bar Green Aluminum Bar J Blue Aluminum Bar M Black Aluminum Bar 321 Stainless Steel Bar O Black Knob S lass 2 lass 3 F2 F-1 F-2 NAE MR15 lassification for Nuclear Facility Application N2 N3 NO Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. Standard thread pitch for metric threads are as follows: M1 and below: 1 mm M12 to M24: 1.5 mm M2 and above: 2 mm 2. FO means FITOK O-seal fittings. 3. FR means FITOK metal ring seal fittings. 4. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level.
19 General Purpose Needle Valves NG Series: Working pressure up to NGH Series: Working pressure up to 3 psig 5 psig Needle Valves 1 Features One-piece forged body. Easy external adjustments by packing nut. Live-loaded packing system. Handle of different colors available for option. ompact design. Panel mounting available as an option. Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure. Working pressure up to: NG Series, Brass, Alloy 4 : 3 psig (2 bar) NGH Series : 5 psig (345 bar) Working temperature: PTFE: -5 F to 45 F (-54 to 232 ) PEEK: -5 F to 5 F (-54 to 2 ) Pressure vs. Temperature NG Series NGH Series Temperature ( ) Temperature ( ) Pressure (psig) Brass Alloy Temperature ( F) 31 SS Pressure (bar) Pressure (psig) SS Pressure (bar) Temperature ( F) 1. Graphs are based on PEEK stem packing F (93 ) max with PTFE stem tip (soft tip). 3. ontact the authorized representative or FITOK Group for curve graph of other materials.
20 1 Needle Valves Flow ata at 1 F (3 ) Regulating Stem Flow oefficient (v) Orifice.39" (1. mm) Orifice.25" (.4 mm) Orifice.1" (4. mm) Orifice." (2. mm) Numbers of Turns Open Standard Materials of onstruction Panel Mounting Stem Type a 11b 11c Taper Regulating Soft Item omponent 1 Handle 2 Set Screw 3 Packing Bolt 4 Washer 5 Packing Spring Washer Upper Packing Lower Packing 9 Packing Washer 1 Panel Nut 11a Stem 11b Stem Stem 11c Stem Tip 12 Body Lubricant Valve Body Material 31 SS Brass Alloy Anodized aluminum or stainless steel or black knob 34 SS/A2 Brass 3/B1 Alloy 4/B14 S1/A93 PTFE/PEEK hrome-plated hrome-plated PTFE/143 or PEEK 31 SS/A12 Brass 3/B23 Alloy 4/B54 Molybdenum disulfide-based
21 Needle Valves 19 imensions Straight Pattern Angle Pattern H (Open) L2 H (Open) L1 L2 L1 imensions of NG Series Basic Ordering Number NG -NS2-5 NG -FNS2-5 NG -FL2-5 NG -ML3-5 NG -FNS2- NG -NS4- NG -FL4- NG -ML- NG -ML- NG -UMB- NG -FNS4- NG -FNS- NG -NS- NG -NS- NG -FL- NG -FL- NG -ML1- NG -ML12- NG -ML14- NG -MS2- onnection Type and Size 1/ Male NPT 1/ Female NPT 1/" FITOK 3 mm FITOK 1/ Female NPT 1/4 Male NPT 1/4" FITOK mm FITOK mm FITOK mm UMB 3/ Female NPT 3/ Male NPT 1/2 Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK M2 x 1.5 Male Metric 1/ Male NPT 1/ Female NPT 1/" FITOK 3 mm FITOK 1/ Female NPT 1/4 Male NPT 1/4" FITOK mm FITOK mm FITOK mm UMB 3/ Female NPT 3/ Male NPT 1/2 Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK M2 x 1.5 Male Metric Orifice in.(mm). (2.).1 (4.).25 (.4) v L1 L2 H.5 (19.5).1 (2.).9 (25.).1 (2.).9 ( 25.) (2.) 1.1 (29.) 2.24 (5.) 1. (2.9) 1.12 (2.4) 1.5 (3.1) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.) (39.) 1.5 (3.1) NG -UMB1-1 mm UMB 1 mm UMB 2. (.) NG -UMB14-14 mm UMB 14 mm UMB imension, in.(mm).5 (19.5).1 (2.).9 (25.).1 (2.).9 ( 25.) (2.) 1.1 (29.) 2.24 (5.) 1. (2.9) 1.12 (2.4) 1.5 (3.1) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.) (39.) 1.5 (3.1) 2. (.).31 (.9).39 (9.9).53 (13.5).2 (15.).53 (13.5).2 (15.).53 (13.5).2 (15.).53 (13.5) 1. (25.4) 1.3 (35.) 1. (4.) 2.2 (5.9) 2.5 (3.5) 2.9 (5.4)
22 2 Needle Valves imensions of NG Series Basic Ordering Number NG -FNS-9 NG -FNS12-9 NG -NS12-9 NG -FL-9 NG -FL12-9 NG -ML14-9 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT 1/2'' FITOK 3/4" FITOK 14 mm FITOK onnection Type and Size Orifice imension, in.(mm) in.(mm) v L1 L2 H 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT 1/2'' FITOK 3/4" FITOK 14 mm FITOK.39 (1.) 1. (39.) 1.3 (41.3) 1.9 (4.3) (39.) 1.3 (41.3) 1.9 (4.3). (19.4).9 (22.5). (19.4) 3.5 (.9) 3.3 (5.) 1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple. 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 3. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group. Panel Mount imensions of NG Series Orifice in.(mm) imension, in.(mm) E F. (2.).44 (11.2).4 (11.9). 1 (4.). 25 (.4).44 (11.2).5 (12.).53 (13.5). (19.) F - Panel Hole rill Panel Mount Thickness 1/1" to 1/4" (1. mm to.4 mm) E.39 (1.).5 (19.1) 1.3 (2.2) 1. NG series valves are standard without panel mounting. 2. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NGSS-NS2-5-Y
23 Needle Valves 21 Straight Pattern Angle Pattern H (Open) L2 H (Open) L1 L2 L1 imensions of NGH Series Basic Ordering Number NGH -NS2-5 NGH -FNS2-5 NGH -FL2-5 NGH -ML3-5 NGH -FNS2- NGH -NS4-1/ Male NPT 1/ Female NPT 1/" FITOK 3 mm FITOK 1/ Female NPT 1/4 Male NPT onnection Type and Size Orifice imension, in.(mm) in.(mm) v L1 L2 H 1/ Male NPT 1/ Female NPT 1/" FITOK 3 mm FITOK 1/ Female NPT 1/4 Male NPT. (2.).9.5 (19.).1 (2.).9 ( 25.).1 (2.).9 ( 25.).5 (19.).1 (2.).9 ( 25.).1 (2.).9 ( 25.).31 (.9) 1. (25.4) 2.2 (5.9) NGH -FL4- NGH -ML- NGH -ML- NGH -UMB- NGH -FNS4- NGH -FNS- NGH -NS- NGH -NS- NGH -FL- NGH -FL- NGH -ML1- NGH -ML12- NGH -ML14- NGH -MS2-1/4" FITOK mm FITOK mm FITOK mm UMB 3/" Female NPT 3/ Male NPT 1/2 Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK M2 x 1.5 Male Metric 1/4" FITOK mm FITOK mm FITOK mm UMB 3/ Female NPT 3/ Male NPT 1/2 Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 14 mm FITOK M2 x 1.5 Male Metric.1 (4.).25 (.4).35. (2.) 1.1 (29.) 2.24 (5.) 1. (2.9) 1.12 (2.4) 1.5 (3.1) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.) (39.) 1.5 (3.1) (2.) 1.1 (29.) 2.24 (5.) 1. (2.9) 1.12 (2.4) 1.5 (3.1) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1.4 (35.) (39.) 1.5 (3.1).39 (9.9).53 (13.5).2 (15.).53 (13.5).2 (15.).53 (13.5).2 (15.) 1.3 (35.) 1. (4.) 2.5 (3.5) 2.9 (5.4) NGH -UMB1- NGH -UMB14-1 mm UMB 14 mm UMB 1 mm UMB 14 mm UMB 2. (.) 2. (.).53 (13.5)
24 22 Needle Valves imensions of NGH Series Basic Ordering Number onnection Type and Size Orifice imension, in.(mm) in.(mm) v L1 L2 H NGH -FNS-9 1/2 Female NPT 1/2 Female NPT NGH -FNS12-9 NGH -NS12-9 NGH -FL-9 NGH -FL12-9 NGH -ML14-9 3/4 Female NPT 3/4 Female NPT 3/4 Male NPT 3/4 Male NPT 1/2'' FITOK 3/4" FITOK 14 mm FITOK 1/2'' FITOK 3/4" FITOK 14 mm FITOK 1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple. 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 3. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group..39 (1.) 1. (39.) 1.3 (41.3) 1.9 (4.3) (39.) 1.3 (41.3) 1.9 (4.3). (19.4).9 (22.5). (19.4) 3.5 (.9) 3.3 (5.) Panel Mount imensions of NGH Series Orifice in.(mm) imension, in.(mm) E F. (2.).44 (11.2).4 (11.9). 1 (4.). 25 (.4).44 (11.2).5 (12.).53 (13.5). (19.) F - Panel Hole rill Panel Mount Thickness 1/1" to 1/4" (1. mm to.4 mm) E.39 (1.).5 (19.1) 1.3 (2.2) 1. NGH series valves are standard without panel mounting. 2. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NGHSS-NS2-5-Y
25 Needle Valves 23 Part Number escription Series Body Material Type NG NGH SS L S4 4L S1 A2 31 SS 31L SS 34 SS 34L SS 321 SS Alloy 2 M Alloy 4 IN Alloy H Alloy -2 B Brass S arbon Steel 94L 94L SS FNS NS FRT RT FMS MS FRP BP FL ML UMB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Fitting Metric Tube Fitting Nut + Gasket + Metric Bulge Nipple Size 2 1/" 4 1/4" 3/ " or mm 1/ 2 or mm " mm 3/4 " or 12 mm 14 mm or M14 x " or 1 mm 1 1 mm /4 " or 2 mm or M2 x mm or M22 x 1.5 NGS4 - FNS - FL - 9P - PYM - ASF2 Type Size Orifice Size Tip Type Packing Material Panel Mounting Handles Flow Pattern NAE MR15 leaning and Packaging Same as Specify in the same way as inlet type and inlet size 5. " (2. mm).1 " (4. mm).25 " (.4 mm) 9.39 " (1 mm) R Regulating K P Taper Soft Tip-PTFE Soft Tip-PEEK PTFE P PEEK NO Y YES F J L Black Knob Not applicable to Orifice.39" (1mm) Red Aluminum Bar Green Aluminum Bar Blue Aluminum Bar Black Aluminum Bar 321 Stainless M Steel Bar A Straight Angle S NO YES F2 F-1 F-2 Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. Standard thread pitch for metric threads are as follows: M1 and below: 1 mm M12 to M24: 1.5 mm M2 and above: 2 mm Standard thread pitch should be ignored in the ordering number, others should be specified. 2.For Orifice.39" (1 mm) needle valves, the option of black knob handle is unavailable. If handle designator is void, a black anodized Aluminum bar handle should be equipped. 3. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level.
26 24 Needle Valves Rising Plug Valves NR Series NRG (With gauge port) Series Features old drawn square bar. Nonrotating stem for longer seat life. Roddable, straight through flow path for maximum flow with minimum pressure drop. Stem thread lubricant isolated from system media. Replaceable seat and stem tip design. Stem thread protected from outside contamination by PTFE ring in the gland. Panel mounting available as an option. Steady and durable fastening of the handle by double lock-pins. Handle color options are available. Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure. Working pressure up to: : psig (414 bar) Alloy 4: 5 psig (345 bar) Working temperature for seat: Working temperature for O-ring: Acetal: -2 F to 25 F (-2 to 121 ) Fluorocarbon FKM: -2 F to 4 F (-2 to 24 ) PEEK: -2 F to 4 F (-2 to 24 ) Buna N: -2 F to 212 F (-2 to 1 ) Ethylene Propylene: -2 F to 14 F (-2 to 3 ) Pressure vs. Temperature Flow ata at 1 F (3 ) Temperature ( ) Orifice.25" (.4 mm) Pressure (psig) Alloy 4 31 SS Pressure (bar) Flow oefficient (v) Numbers of Turns Open Orifice.19" (4. mm) Temperature ( F) 1. Graphs are based on PEEK seat and Fluorocarbon O-ring. 2. ontact the authorized representative or FITOK Group for curve graph of other materials.
27 Needle Valves 25 Standard Materials of onstruction Panel Mounting Item omponent Handle Set Screw Wiper Ring Upper Stem Panel Nut Bonnet Backup Ring O-ring Lock Nut Stem Tip Seat Body Lubricant Valve Body Material 31 SS 34 SS 321 SS Alloy 4 Anodized aluminum or stainless steel or black knob PTFE/11 Alloy 4/B14 31 SS/A49 34 SS/A SS/A49 Alloy 4/B14 PTFE/11 Fluorocarbon FKM, Buna N or Ethylene propylene 34 SS/A2 321 SS/A2 Alloy 4/B14 Acetal or PEEK 31 SS/A49 34 SS/A SS/A49 Alloy 4/B14 Molybdenum disulfide-based
28 2 Needle Valves imensions Standard Pattern NR Series Gauge Port Pattern NRG Series F - Panel Thickness G - Panel Hole rill E H ( Open ) F - Panel Thickness G - Panel Hole rill 1/4-1 NPT E H (Open) L1 L2 L1 L2 NR series valves are standard without panel mounting. To order valves with panel mounting as illustrated, add - Y to the ordering number. Example: NRSS-FNS4--Y Basic Ordering Number NR -FNS4- NR -NS4-FNS4- NR -NS-FNS4- NRG -FNS4- NRG -NS-FNS4- NR -FNS- NR -NS-FNS- NR -NS12-FNS- NRG -FNS- NRG -NS12-FNS- onnection Type and Size 1/4 Male NPT 1/2 Male NPT 1/2 Male NPT 1/2 Female NPT 1/2 Female NPT 1/2 Male NPT 1/2 Female NPT 3/4 Male NPT 1/2 Female NPT 1/2 Female NPT 1/2 Female NPT 3/4 Male NPT 1/2 Female NPT Orifice in.(mm).19 (4.).25 (.4) v.3 1. L (2.4) 1. (45.2) 1.9 (4.) 1.12 (2.4) 3.12 (9.2) 1.33 (33.) 2.1 (54.9) 3.33 (4.) L (2.4) 1.5 (44.4) 1.33 (33.) 2.25 (5.2).44 (11.1).5 (12.).5 (14.3) imension, in.(mm) E F G 2.1 (55.) 2.5 (3.5) 1.2 (32.5) 1.34 (34.) 1.4 (35.5).3 (9.).3 (9.). (19.). (19.) H 3. (95.) 3.3 (9.3) 1. Sizes and types listed are standard. Other sizes and types are available upon request. 2. For dimensions not shown above, please contact the authorized representative or FITOK Group.
29 Needle Valves 2 Part Number escription Series Body Material Type NR SS 31 SS FNS Female NPT NRG L 31L SS NS Male NPT S4 34 SS FRT Female BSPT 4L S1 5 TI A2 M IN H B 34L SS 321 SS uplex 225 Titanium Alloy 2 Alloy 4 Alloy Alloy -2 Brass RT FMS MS FRP BP Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) S arbon Steel 94L 94L SS Size 2 1/" 4 1/4" 3/ or mm " 1/ 2 or mm " mm 3/4 " or 12 mm NRSS - NS - FNS - P - BYM - SF2 Type Size Seat Material Orifice Size O-ring Material Panel Mounting Handle NAE MR15 Same as Specify in the same way as inlet type and inlet size P Acetal PEEK.19 " (4. mm).25 " (.4 mm) B E FKM Buna N Ethylene propylene No Y Yes F Black Aluminum Bar Red Aluminum Bar Green Aluminum Bar S No Yes J Blue Aluminum Bar M 321 Stainless Steel Bar O Black Knob Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level. leaning and Packaging F-1 F2 F-2
30 2 Needle Valves Toggle Valves NT Series Features One piece forged body. Straight and angle pattern. ompact design. Quick opening or closing. Nonrotating stem tip. Panel mounting available. Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure. Working pressure up to: 3 psig (2. bar) Technical ata Orifice in.(mm) Working Pressure o o at 1 F (3 ) O-ring Material Temperature Rating. (2.).125 (3.2).25 (.4) 3 psig (2. bar) 2 psig (13. bar) FKM(Standard) Buna N Ethylene Propylene -2 F to 4 F (-2 to 24 ) -2 F to 212 F (-2 to 1 ) -2 F to 3 F (-2 to 14 ) Standard Materials of onstruction Item omponent Handle Pin Stem Panel Nut Spring Bonnet O-ring Stem Tip Body Lubricant 31 SS 34 SS/A2 Valve Body Material 34 SS 321 SS 34 SS/A2 34 SS/A2 PTFE-plated S1/A313 PTFE/11 34 SS/A2 Fluorocarbon FKM or Buna or Ethylene propylene Molybdenum disulfide-based Brass Brass 3/B1 Brass 3/B1 31 SS/A12 34 SS/A SS/A12 Brass 3/B23
31 Needle Valves 29 imensions Straight Pattern Angle Pattern E - Panel Hole rill Panel Mount Thickness 1/1 " to 1/4" (1.mm to.4mm) H (Open) E - Panel Hole rill H (Open) Panel Mount Thickness 1/1 " to 1/4" (1.mm to.4mm) L1 L1 L2 L2 Basic Ordering Number NT -NS2-5 NT -NS2-FL2-5 NT -FL2-5 NT -ML3-5 NT -FNS2- NT -NS2- NT -NS4- NT -NS4-FL4- NT -FL4- NT -ML- NT -ML- onnection Type and Size 1/ Male NPT 1/ Male NPT 1/" FITOK 3 mm FITOK 1/ Female NPT 1/ Male NPT 1/4 Male NPT 1/4 Male NPT 1/4" FITOK mm FITOK mm FITOK 1/ Male NPT 1/" FITOK 1/" FITOK 3 mm FITOK 1/ Female NPT 1/ Male NPT 1/4 Male NPT 1/4" FITOK 1/4" FITOK mm FITOK mm FITOK Orifice imension, in.(mm) v in.(mm) L1 L2 E. (2.).125 (3.2) (19.5).5 (19.5).9 (25.).1 (2.). (21.).9 (25.).9 (25.) (2.).5 (19.5).9 (25.).9 (25.).1 (2.). (21.).9 (25.) (2.).32 (.2).39 (1.).5 (21.).5 (21.).53 (13.5).53 (13.5) H 2.3 (1.9) 2.3 (1.9) NT -FNS4- NT -FNS- NT -NS- NT -FL- NT -FL- NT -ML1- NT -ML12-3/ Female NPT 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK 3/ Female NPT 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 12 mm FITOK.25 (.4). 1. (2.9) 1.12 (2.4) 1.29 (32.) 1.4 (35.) 1.3 (34.5) 1.4 (3.1) 1. (2.9) 1.12 (2.4) 1.29 (32.) 1.4 (35.) 1.3 (34.5) 1.4 (3.1).53 (13.5) 1. (2.9). (1.) 3.59 (91.2) 1. FITOK means FITOK double ferrule tube fittings, ISO means metric thread, 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information. 3. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group.
32 3 Needle Valves Part Number escription NTSS - FNS4 - FL - E - AF2 Series Body Material Type Size Type Size Orifice Size O-ring Material Flow Pattern leaning and Packaging NT SS 31 SS S4 34 SS S1 321 SS B Brass 94L 94L SS FNS NS FRT RT FMS MS FRP BP FL ML Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Fitting Metric Tube Fitting 4 1/4" 1 1 mm /" 3/" or mm 1/ 2" or mm 3/4 " or 12 mm mm 1 1 mm Same as Specify in the same way as Type and Size 5." (2. mm).125" (3.2 mm).25" (.4 mm) B E FKM Buna N Ethylene propylene A Straight Angle F2 F-1 F-2 Note: "Part Number escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. 1. Standard thread pitch for metric threads are as follows: M1 and below: 1 mm M12 to M1: 1.5 mm Standard thread pitch should be ignored in the ordering number, others should be specified. 2. leaning and Packaging: F-1: Standard cleaning and packaging for general industrial procedures. F-2: Special cleaning and packaging for wetted system components to ensure compliance with product cleanliness requirement as stated in ASTM G93 Level.
33 Union Bonnet Needle Valves NU Series: Working pressure up to NUH Series: Working pressure up to psig 1 psig Needle Valves 31 Features One-piece forged body. Two-stem design: thread hardened upper stem and smooth surface hardened lower stem. Accidental valve disassembly disabled by union bonnetconstruction. Upper stem thread lubricant isolated from system media. Linearly instead of helical movement of the nonrotating lower stem, avoiding galling damage to the seat and tip, as well as reducing the total friction area between the packing and the lower stem. Safety back seating seal in fully open position. Panel mounting available. Steady and durable fastening of the handle by doublelock-pins. Handle color options are available. Leak-tight performance testing for every valve with nitrogen/air at the maximum working pressure, but not higher than psig. Working pressure up to: NU series : psig (414 bar) Alloy -2: psig (414 bar) Alloy 4: 5 psig (345 bar) Titanium: 35 psig (241 bar) NUH series : 1 psig (9 bar) Working temperature: PTFE: -5 F to 45 F (-54 to 232 ) PEEK: -5 F to 5 F (-54 to 2 ) Graphite: -5 F to 12 F (-54 to 49 ) Pressure vs. Temperature NU Series NUH Series Pressure (psig) Temperature ( ) Alloy 4 Titanium 31 SS Alloy Temperature ( F) Pressure (bar) Pressure (psig) Temperature ( ) Temperature ( F) L SS 31 SS Pressure (bar) 1. Graphs are based on graphite stem packing. 2. Suitable for NU series only, 2 F (93 ) max. with PTFE stem tip (soft tip). 3. ontact the authorized representative or FITOK Group for curve graph of other materials.
34 32 Needle Valves Flow ata at 1 F (3 ) Regulating Stem Flow oefficient (v) Orifice.39" (1. mm) Orifice.25" (.4 mm) Orifice.1" (4. mm) Numbers of Turns Open Standard Materials of onstruction Stem Type 11 e a 11 b 11 c 11 d Taper Regulating Ball Soft Riveting (Only NUH) Item a 11b 11c 11d 11e 12 omponent Handle Set Screw Upper Stem Packing Bolt Lock Nut Panel Nut Gland Packing Bonnet Union Nut Lower Stem Body Seat Lubricant 31 SS hrome-plated Valve Body Material Alloy 4 Titanium Alloy -2 Anodized aluminium or stainless steel or black knob 34 SS/A2 PTFE or PEEK or graphite 31 SS/A49 Alloy 4/B14 Titanium Gr 4/B34 Alloy -2/B54 31 SS/A12 Alloy 4/B14 Titanium Gr 4/B34 Alloy 4/B14, B12, B54 Same as Body Titanium Gr 4/B34 or titanium Gr 4/B31 Molybdenum disulfide-based Alloy -2/B54 Alloy -2/B54
35 Needle Valves 33 imensions Straight Pattern Angle Pattern Panel Mount Thickness 1/1 " to 3/ " (1. mm to 9.5 mm) F - Panel Hole rill H (Open) Panel Mount Thickness 1/1 " to 3/ " (1. mm to 9.5 mm) F - Panel Hole rill E H (Open) F E L1 L2 L4 L3 imensions of NU Series Basic Ordering Number NU -FNS2- NU -FNS4- NU -NS4-FNS4- NU -NS4- NU -NS- NU -FRP4- NU -NS4-FL4- NU -FNS4-FL4- NU -FL4- NU -ML- NU -ML- NU -TS4--G NU -FO4- NU -FR4- NU -FNS4- NU -FNS- NU -NS- NU -FL- NU -FL- NU -ML1- onnection Type and Size Orifice imension, in.(mm) in.(mm) v L1 L2 L3 L4 E 1/ Female NPT 1/4 Male NPT 1/4 Male NPT 3/ Male NPT 1/4 Female BSPP 1/4 Male NPT 1/4" FITOK mm FITOK mm FITOK 1/4" TS 1/4" Male FO 1/4" Male FR 3/ Female NPT 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK 1/ Female NPT 1/4 Male NPT 3/ Male NPT 1/4 Female BSPP 1/4" FITOK 1/4" FITOK 1/4" FITOK mm FITOK mm FITOK 1/4" TS 1/4" Male FO 1/4" Male FR 3/ Female NPT 3/ Male NPT 3/" FITOK 1/2'' FITOK 1 mm FITOK.1 (4.).25 (.4) (25.4) 1.3 (2.2) 1. (25.4) 1. (25.4) 1.3 (2.2) 1. (25.4) 1.3 (2.2) 1.22 (3.9).91 (23.1) 1.3 (2.2) (2.) 1.41 (35.9) 1.52 (3.) 1.42 (3.1) 1. (25.4) 1.3 (2.2) 1.3 (2.2) 1. (25.4) 1.3 (2.2) 1.22 (3.9) 1.22 (3.9) 1.22 (3.9).91 (23.1) 1.3 (2.2) (2.) 1.41 (35.9) 1.52 (3.) 1.42 (3.1).9 (22.) 1. (25.4).9 (22.) 1.14 (2.). (22.4) 1. (25.4) 1. (2.9) 1.29 (32.) 1.4 (35.) 1.3 (33.) 1. (25.4) 1.22 (3.9) 1.19 (3.2) (2.) 1. (42.2) 1.5 (41.9) 1.55 (39.4) 1.5 (44.5) 2.5 (3.5).39 (9.9).5 (12.) 1.9 (2.) 1.34 (34.) F.59 (15.1). (19.) H 3.4 (.2) 3. (95.)
36 34 Needle Valves imensions of NU Series Basic Ordering Number onnection Type and Size Orifice imension, in.(mm) in.(mm) v L1 L2 L3 L4 E F H NU -ML12- NU -ML14-12 mm FITOK 14 mm FITOK 12 mm FITOK 14 mm FITOK 1.52 (3.) 1.52 (3.) 1.4 (35.) 1.5 (41.9) NU -ML1-1 mm FITOK 1 mm FITOK NU -TS--G 3/" TS 3/" TS NU -TS--G 1/2" TS 1/2" TS NU -PS4--G 1/4 PS 1/4 PS NU -MTS12--G NU -MTS14--G NU -MTS1--G 12 mm MTS 14 mm MTS 1 mm MTS 12 mm MTS 14 mm MTS 1 mm MTS.25 (.4). (2.) (2.) 1. (25.4) (2.) 2.5 (3.5).5 (12.) 1.34 (34.). (19.) 3. (94.) NU -MTB14--G 14 mm MTB 14 mm MTB NU -MTB1--G NU -UMB14- NU -FO- NU -FR- 1 mm MTB 14 mm UMB 1/2" Male FO 1/2" Male FR 1 mm MTB 14 mm UMB 1/2" Male FO 1/2" Male FR 2.92 (4.1) (2.) (39.) 2.92 (4.1) (2.) (39.) 2.55 (4.) 2.92 (4.1) NU -MS2- NU -MS22- M2 x 1.5 Male Metric M22 x 1.5 Male Metric M2 x 1.5 Male Metric M22 x 1.5 Male Metric 1.5 (3.1) 1.5 (3.1) (2.) 1.5 (3.1) NU -NS-9 NU -FNS-9 NU -FNS12-9 NU -NS12-9 1/2 Male NPT 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT 1/2 Male NPT 1/2 Female NPT 3/4 Female NPT 3/4 Male NPT (39.) 1.3 (41.3) (39.) 1.3 (41.3) (39.) (39.).3 (1.). (22.2) 1.2 (4.2) 2. (52.) 4. (121) 5. (12) NU -FL-9 1/2'' FITOK 1/2'' FITOK NU -FL12-9 3/4" FITOK 3/4" FITOK NU -ML14-9 NU -ML mm FITOK 1 mm FITOK 14 mm FITOK 1 mm FITOK 1.9 (5.) 1.9 (5.) 1. (42.) 2. (52.) NU -ML1-9 NU -ML2-9 1 mm FITOK 2 mm FITOK 1 mm FITOK 2 mm FITOK.39 (1.) (.9).3 (1.) 1.2 (4.2) 1.3 (2.2) 4. (121) NU -MTS14-9-G 14 mm MTS 14 mm MTS NU -MTS1-9-G NU -TS-9-G 1 mm MTS 1/2" TS 1 mm MTS 1/2" TS (39.) (39.) 1.31 (33.3) 1.9 (42.9) NU -TS12-9-G 3/4" TS 3/4" TS NU -MTB1-9-G 1 mm MTB 1 mm MTB NU -UMB mm UMB 14 mm UMB 2.9 (5.) 2.9 (5.) NU -FO12-9 NU -FR-9 3/4" Male FO 1/2" Male FR 3/4" Male FO 1/2" Male FR (39.) (39.) NU -MS2-9 M2 x 2 Male Metric M2 x 2 Male Metric 1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings, TS means fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket + metric bulge nipple, PS means pipe socket weld. 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing material due to the high temperature when welding. 3. Sizes and types listed are standard. Other sizes and types are available upon request. 4. imensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group.
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationSevere-Ser vice Union-Bonnet Needle Valves
www.swagelok.com Severe-Ser vice Union-onnet Needle Valves N Series and N Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
More informationneedle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationSevere-Service Union-Bonnet Needle Valves
www.swagelok.com Severe-Service Union-Bonnet Needle Valves N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationIntegral-Bonnet Needle Valves
www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) 2 Integral-Bonnet
More informationBall Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves Spring
More informationVCR Metal Gasket Face Seal Fittings
www.swagelok.com Metal Gasket Face Seal Fittings 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Metal Gasket Face Seal Fittings ontents Typical
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationHM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationValves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More information2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationBlock and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More information167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationVALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationPilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves BelGAS Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing.
More informationHOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationVariable Area Flowmeters
www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationFisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationMADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
More informationCompact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
More informationBaumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
More informationREPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
More informationSeries 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationOEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
More informationBall Valves. General Purpose and Special Application. 60 Series. www.swagelok.com. 1/8 to 2 in. and 6 to 25 mm sizes
www.swagelok.com Ball s General Purpose and Special Application 60 1/8 to 2 in. and 6 to 25 mm sizes Stainless steel, carbon steel, brass, and special alloy materials On-off (2-way) and switching (3-way)
More informationRMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationAuthentic ITT Service Parts
Pure-Flo Authentic ITT Service Parts Providing our customers with a quality product has always been an integral part of how ITT does business. Building on this commitment your Authorized Distributor of
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationProduct Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
More informationAccessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationInstallation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationWD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
More informationBaumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationThe First Line of Safety
Pilot Operated Pressure Relief Valves The First Line of Safety Pilot Operated Pressure Relief Valves 597C Farris Engineering Pressure Relief Valves Process Pressure Relief Valves Series 2600 ASME NB Certified:
More informationTubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationEWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationRegulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationNon-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
More informationANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More informationCommercial / HVAC / Plumbing. Specification Guide. For. Pressure & Temperature Instruments & Related Accessories
Commercial / HVAC / Plumbing Specification Guide For Pressure & Temperature Instruments & Related Accessories Prepared for Consultant, Design & Specification Engineers Gauges Contractor Gauge (PCT, PCT-LF)
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationHigh CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More information