1 Table of Contents I. PC Client S/W User s Manual Introduction of.avh Files Player Introduction of Function Keys Specific Operation Introduction of DVR Network Remote Client Introduction of Function Keys Specific Operation Introduction of DVR Network Files Player Introduction of Function Keys Specific Operation Introduction of DVR Network Assistant Tools...18 II. Network Settings in DVR Menu...21 III. DDNS Specification Setting up DHCP Setting up Server IP Address and Port in the Router Enter the Router Setting up Server IP Address and Port Operating DVR Through IE Amending the Security Settings of IE Installing & Removing ActiveX Controls Browsing and Operating DVR Through WAN (IE)
2 I. PC Client S/W User s Manual Digital Video Recorder Client and Network Manual V1.1 Put the accessories CD of the DVR in the CD driver of the computer. Copy the Client Software onto the computer and open it, then double-click the Client folder. You could see the icon, please double-click it. 1. Introduction of.avh Files Player.AVH Files Player could play back-up files. Client s local video recording files, USB back-up files and CD files could be played by this player. Click to run this software: 2
3 1.1 Introduction of Function Keys Icon Function Icon Function Open the files Open/Close audio Play Pause Stop Frame play during pause Fast forward multiple Switch the file format from.avh to.avi Frame fast backward during pause Screen capture Select video playing channels Exit 1.2 Specific Operation (1) Look for the files and play Click, you can see the path of opening files: 3
4 Select.avh file, it can not play other file type. Click Open to play. If the file is being playing, the effective channel numbers will turn to bright, from to (2) Capture and save Use to capture screen and then save the screen image in another files. Click the icon above to capture the image, at the same time, the following dialog box pop up, Select one folder from the save path. (3) Switchover the file format Then click Save to save the captured screen as.bmp file. Click, switchover the file format from.avh to.avi 4
5 1Click it to select.avh file. Click the box as to save the audio. 2 Click it to select save path. 3Click it, the.avh file will be changed into the.avi file. (4) Exit Click to exit. 2. Introduction of DVR Network Remote Client DVR Network Remote Client is used to watch the live recording, operate DVR and control PTZ and network video recording. Click to run this software. If a user security code or password was set before, you should type it in. (admin password is , normal user password is111111) 5
6 2.1 Introduction of Function Keys Icon Function Icon Function Screen capture Disk information Open/Close audio Password manage Live record / Stop Delete DVR IP Connect/ Disconnect DVR Exit Quad-picture display Set user information and net parameter Add DVR IP (16 IP could be added at one time) 9-picture display 16-picture display Control the lens to enlarge the aperture Control the lens to prolong the focus Control the lens to withdraw the establishing shot and enlarge the image Control PTZ to rotate upward/ downward/ leftward/ rightward and stop auto rotation Control PTZ to rotate automatically Control the lens to reduce the aperture Control the lens to shorten the focus Control the lens to reduce the image and expand the vision Display the DVR name. Click the names to switch the previewing video among DVRs. 6
7 2.2 Specific Operation Digital Video Recorder Client and Network Manual V1.1 (1) Add IP of DVR Click to add IP of DVR. Type the IP/ domain name (e.g or dvrddns.kmip.net) and port (e.g. 6802) of the DVR which need added. Then type the network user s name (default user01) and the password (default or ) of the DVR. If the password is a super one, the playing speed of the video is faster. At last, click Enter, the IP could be added. (2) Delete the IP If you want to delete the IP, click it to select, then click deleted. Note: After deleting, all IP are disconnected. (3) Connect network DVR and preview, the IP could be 1Select one newly added IP to click, then click, the DVR could be connected. You can see the icon appearing. You can preview the live image. Click to disconnect. Note: If connect error, please check the IP is right or not and the netting twine is connected well or not. 2You can connect more than one DVR to the Client at the same time. Click, all added DVR can be selected to connect at the same time. You can preview 16 channels which can be selected and ranged arbitrarily at a time, as the picture below. 7
8 We can see from here that two DVR are connected in this operation. One is (IP), the other is dvrddns.kmip.net (domain name) Select preview channels Move the cursor to a channel, right-click the mouse to pop up DVR names (IP or domain name), e.g.. Move the cursor onto one DVR name to pop up channel numbers, e.g. in the picture above, you can see CH01 to CH16 on the right of DVR Left-click to select the channel, and the image display at once. The DVR name and channel NO. display on the top of the image. (4) Set 8
9 Click Digital Video Recorder Client and Network Manual V1.1 to set user information, net parameter, Ptz Set, Cam Set and Record Set for the newly added IP. a. Set user information. Click User Info Type the IP/ domain name (e.g. dvrddns.kmip.net) and port (e.g. 6802) of the DVR which need setting. Then type the network user s name (default user01) and the password (default or ) of the DVR. Show Name shows the IP name, you could change it here as you like. Click Enter, the setting is finished. The new name will be seen here:. b. Set net parameter. Click net parameter Introduction of the icons: 9
10 Icon Digital Video Recorder Client and Network Manual V1.1 Function Open/close a certain channel of live network video recording Set the frame rate/ image quality of live browse Frame rate:3/8/16 Image quality: low/ medium/ high This function is only for super password logging in. Click Browse to choose the save path of network video Click and to save audio and connect the network automatically. After setting, click Enter to save. c. Set PTZ. Click Ptz Set You could set baudrate, device ID and protocol of each camera. d. Set camera. Click Cam Set 10
11 As the above figure showed, you could set these items of each camera. e. Set record. Click Record Set As the above figure showed, you could set these record parameters of each camera. (5) Record Under the condition of connecting the DVR, you could choose channels through setting in Net Parameter, then click to record locale image through network. Click to stop recording. (6) Password manage Click to manage the password of PC Client. 11
12 Click the box as to use password system. If you don t want to use password system, click Cancel. If you have used password system, you must type in the password to log in PC Client next time. Admin password could do all operation, normal user password just could watch the locale video. Change the admin password, please click Set New Admin Password Input the new password, Click Enter, the new password will be OK. The way of changing the normal user password is the same with changing the administrator password. You must input the administrator password before changing the normal user password. (7) View DVR information Click to view the hard disk information and working mode of the DVR. 12
13 Click it to record when the DVR is not in record mode. It cann t stop recording. Introduction of the indicator lights in the above picture: (Display the current working mode) Red denotes this function is turned on, white denotes this function is not in use. ALARM: external alarm indicator light; PTZ: PTZ operation indicator light; SEQ: auto switching indicator light; NET: network connection indicator light; PLAY: playback indicator light; REC: record indicator light; PWR: power indicator light; LOCK: panel lock indicator light; IR: remote control available indicator light. 3. Introduction of DVR Network Files Player DVR Network Files Player could play DVR HDD files remotely through network. Click to run this software: 13
14 3.1 Introduction of Function Keys Icon Function Icon Function Play/ Stop Network backup Time point play Fast play Normal play Log in Open audio Close audio Screen capture Log out Display the IP that connecting to DVR E.g. Display the beginning and ending time of the DVR HDD file. That is the effective playing time. E.g. Network playing channel 14
15 Date selecting Select the effective time. The up line is the ending time of backup, the down line is the beginning time of backup or playing. 3.2 Specific Operation (1) Log in Click to log in. Type in the server IP and password. Then you could see the following interface. 15
16 (2) Playing DVR HDD file. According to time displaying, select the right date and time by and. Then select the right playing channel by. Click (3) Backup to play. Click to backup through network. Select the beginning and ending time of backup that you need by, then choose the backup channel by, now please click : 16
17 Click the box as, the audio could be saved. Click it to select the save path for backup of live network video. Click BACKUP : Show backup speed The above dialog box disappears immediately as soon as backup is finished. Users could find the backup file in the saving path, and then play it by.avh file player. (4) Time play Click, choose the time to play. Click here to select time 17
18 4. Introduction of DVR Network Assistant Tools Network Assistant Tools is used to upgrade software and change channel titles of non-english letters. A. Click to run Network Assistant Tools. B. Click CONNECT to log in Type in the IP and the password, then click Enter, you could see: 18
19 Now you could update software and channel titles. a. Click Soft Update Click browse to select the right path for soft update. The item must be..\..\update, that is to say the last grade must be update, or the software can t recognize the file. b. Update the channel title of DVR through network. Click Channel Title : 19
20 If the channel title consist of English letters, you needn t update it here. You can change it in the DVR directly. Here it is fit for Chinese title. Choose the channel that need changed from the left channels, then type in the new title and select font. Click Preview, you could preview the new title from the right part. After setting, click Change Channel Name, it will be finished. Addition: Update the same title at Channel Set of DVR, then restart the DVR, you could see the new title in the video. 20
21 II. Network Settings in DVR Menu Digital Video Recorder Client and Network Manual V1.1 This step is set in the DVR. In live preview mode, enter the main menu by remote control or the MENU key on the DVR panel. Select the icon menu by enter key. by up/down/left/right keys, then enter network setting A. IP address: You d better set the fourth date from 10 to 99, or it will collide with the router DHCP. (Note: The IP in DVR menu network setting must be the same as the IP in Router.) B. Gateway and subnet mask C. DVR port: Transfer date stream, such as video and audio frequency. D. IE port: Download ActiveX control. (Default 0080) E. User name: Set user name of telnet. (Default user01) F. Password: Set password of telnet. It supports 4 users to log in at the same time. (Default ) G. Super password: Set password of telnet. It only supports one user to log in at one time. It owns the most purview and could do remote operation. (Default ) Logging in with the super password, the connection by logging in of common password will be shut off automatically. 21
22 III. DDNS Specification Digital Video Recorder Client and Network Manual V Setting up DHCP Firstly, please confirm that the DVR is in working mode and HDD & reticle is connected well and network is OK. Then enter DVR network setting menu. A. Select DHCP by clicking in. The DVR will get an IP from the Router automatically, e.g ; then set DVR port, IE port, User name and password. Then exit from the menu and return to live mode. B.Wait for 20 seconds or so. Then press INFO key on the front panel or remote controller. You could see in network information. *A**** is the only code, it cann t be shows network connecting well. Note: If you didn t select DHCP, you couldn t see in INFO menu. 22
23 2. Setting up Server IP Address and Port in the Router 2.1 Enter the Router Type in the Address field of Internet Explorer. Then type the default user name (admin) and password (password) in the following pop-up dialog box. Click OK, enter the interface of Router setting. 2.2 Setting up Server IP Address and Port Click Port Forwarding on the left list. 23
24 Click Add Custom Service in the figure above to pop up a new figure, you could set two groups of Service IP address and Port (Twice) as follows. One port is 80, the other one is Type the IP in the Server IP Address, e.g Type the beginning port number in the Starting Port box. Type the same port number in the Ending Port box, e.g * Note:They must be the same as the data in DVR Network Setting menu. Then click Apply, you could see: 24
25 Note: The Ports must be different from the previous setting in the router. After finishing all settings, please check the information (include IP, port, IE port etc.) in the DVR networt menu which is the same with the router s. Then you could operate the DVR through wide area network (WAN). 3. Operating DVR Through IE You could operate DVR remotely through Internet Explorer. Please do the following steps before using IE. 3.1 Amending the Security Settings of IE Right-click the icon, then click Properties --- Security in the pop up dialog box. You could see the dialog box below. 25
26 Click it to pop up the dialog box security settings. Click to pop up the dialog box security settings. Follow the setting examples in the dialog boxes below to set the items (7 altogether) that under as or. 26
27 Click it to pop up the dialog box Warning! below. Click Yes, the setting is OK. Vista PC If your computer is Vista system, after you finish the above steps, you still need to close UAC (User Account Control) to make ActiveX controls run normally. 3.2 Installing & Removing ActiveX Controls (1) Installing ActiveX controls If you didn t install ActiveX controls in your computer, the system will prompt you to install it automatically when you type the IP/domain name and IE port in the address field of IE explorer, e.g. The dialog box below pop up: Click it to pop up the dialog box below. 27
28 Click it, ActiveX controls will be installed automatically. You could browse through IE after ActiveX controls has been installed automatically. (2) Removing ActiveX controls If you want to change the DVR which is connected to IE or ActiveX controls updated, you need to remove the former ActiveX controls in your PC. Step 1 Please find the remove file in the Client software folder which is in the attached CD of the DVR. Then double-click it, it will remove ActiveX controls automatically. Step 2 Right-click the IE icon, then click Properties in the pop up dialog box. You can see a dialog box Internet Properties-General. Then delete all cookies, files and history record in Temporary Internet Files. Finish the two steps, ActiveX controls can be removed fully. 3.3 Browsing and Operating DVR Through WAN (IE) A. Preparation Finish all settings (include IP, port, IE port etc.) in the DVR networt menu and router. Then Wait for 20 seconds or so. Then press INFO key on the front panel or remote controller. The following menu pop up. Software shows that network connection is normal. 28
29 You could see in network information. *A**** is the only code, it cann t be shows network connecting well. Note: 1. If you didn t select DHCP, you couldn t see in INFO menu. 2. The software version is v2.037 or more advanced, or it doesn t support this function. B. Startup IE. Type the domain name in the address bar and wait for a moment. You could see the following interface: Click the second icon to enter Network Remote Client. The operation is the same with PC Client Software. Note: 1. Please select DHCP in network setup menu. 2. You d better modify the default user name and password. 29
DIGICLIENT 8.0 Remote Agent Software MODEL: D17800 Series Instruction Manual English Version 1.0 Copyright 2007 Digimerge Technologies Inc Table of Contents Table of Contents About the DigiClient 8.0...
Quick-Start Guide SUPER DVR MONITORING SOFTWARE Remote Surveillance & Playback For use on Q-See s QSDT series of PC Securitiy Surveillance Cards 2 CONFIGURING ROUTER FOR REMOTE ACCESS REMOTE SURVEILLANCE
ACS CLIENT SOFTWARE USER MANUAL 1 ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD WindowXP, Vista Pentium 4, 2Ghz 1024*768, 64MB 24bit color graphic card 1GB 20MB
Professional Surveillance System User s Manual \ 1 Content Welcome...4 1 Feature...5 2 Installation...6 2.1 Environment...6 2.2 Installation...6 2.3 Un-installation...8 3 Main Window...9 3.1 Interface...9
User Manual of Web Client 1 Index Chapter 1 Software Installation... 3 Chapter 2 Begin to Use... 5 2.1 Login and Exit... 5 2.2 Preview Interface Instruction... 6 2.3 Preview Image... 7 Chapter 3 Playback...
SMS (Server Management Software) Digital Video Recorder User s Manual Contents 1 - Introduction 2 1.1 About this manual 2 1.2 Configuration 2 1.3 SMS Functions 2 1.4 Product Information 2 1.5 System Requirements
A quick user guide for your LX Apollo DVR The LX Apollo series of DVR s is designed specially for the security and surveillance field and is an outstanding digital surveillance product. It has an embedded
i -CEN S i -CEN'S USER S Manual 2007. 08. 13. i -CEN S Table of Contents Overview of i-cen S software... 4 1 Introduction of i-cen S... 4 2 Key Features... 5 3 Key Benefits... 5 4 System Specification...
LOREX CLIENT Remote Software 4.0 Instruction Manual English Version 2.0 MODEL: L20WD800 Series www.lorexcctv.com Copyright 2008 LOREX Technology Inc. Table of Contents Table of Contents Software Installation...
NetClient software user manual 1-1. General information Net Client is an application which provides users not only viewing and controling remote DVRs, but also receiving realtime event data or alarm signals
SMS Remote Software User Manual Pro Series & Contender Series DVRs Table of Contents Chapter 1 Overview 1 1.1 In This Manual 1 1.2 Overview 1 1.3 SMS Features 1 1.4 Product Information 1 1.5 System Requirements
User Manual V1.0 Notice: The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change
Central Management System (CMS) USER MANUAL LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission
7. Mobile Phone Support A state-of-the-art feature of this DVR device is transmitting live feed from the CCTV cameras to your mobile phone, so that you can have on the go access to your surveillance system
Mobile Viewer s Access Instruction 1 Windows mobile System...2 2 Symbian System...4 3 iphone.6 4 Blackberry..7 5 Android.11 1. Windows Mobile 1) First you need to copy a program named as "Aseesetup.CAB"
Quick Start Guide DVR DS-7300HWI-SH Series DVR DS-7200HWI-SH Series DVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com
Quick Start Guide NVR DS-7104NI-SL/W NVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com Quick Start 1.
SMS (Server Management Software) Digital Video Recorder User s Manual 1 SMS User s Guide Table of Contents Chapter 1 Overview.....03 1.1 In This Manual..03 1.2 Overview 03 1.3 SMS Features...03 1.4 Product
Quick Start Guide Hybrid DVR DS-9000 Series Hybrid DVR DS-7600 Series Hybrid DVR NVR DS-9600 Series NVR Analog DVR DS-9100 Series DS-8100 Series DS-7300 Series DS-7200 Series NOTE: For more detailed information,
User s Manual of DVR DVS Remote Client Software V 4.0.1 Index Version description...4 1 Introduction...8 2 Software Install, Uninstall and use...9 2.1 Install remote client software ver4.0.1...9 2.2 Uninstall
ivms-4200 Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION disclaims
ivms-4500 (iphone) Mobile Client Software User Manual (V3.1) UD.6L0202D1029A01 Thank you for purchasing our product. This manual applies to ivms-4500 (iphone) mobile client software; please read it carefully
REMOTE AGENT USER S MANUAL Revision Date : 2006.10.02. 0 INDEX CHAPTER 1. Installation-------------------------------------------------------- 2 CHAPTER 2. Function introduction------------------------------------------------
SMS (Server Management Software) Digital Video Recorder User s Manual 1 Table of Contents Chapter 1 Overview.....03 1.1 In This Manual..03 1.2 Overview 03 1.3 SMS Features...03 1.4 Product Information..03
ivms-4200 Intelligent Video Management System Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION.
Instruction for IE network monitor This system features a built-in browser-based software that allows you to access your system remotely over your local area network (LAN) or over the Internet (WAN) using
ivms-4200 Client Software Quick Start Guide UD.6L0202B1538A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies
CDVS-7000 Series Remote Software Users Guide Crest Electronics, Inc. Version 12.1005 Remote Surveillance Program The remote surveillance program enables users of the Crest 7000 series DVRs to connect remotely
Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's
CMS-DH CENTRAL MANAGEMENT SOFTWARE CMS-DH is a central management software that allows you to view and manage up to 300 DH200 series DVRs. System Requirements Your system must meet the system requirements
QSD2316L DVR User s Manual H.264-200 FPS /240 FPS 16-channel digital video recorder All rights reserved Rev 062408 QSD2316L DVR User s Manual CAUTION Please read this user manual carefully to ensure that
Accessing the DVR from a Computer Attached to the Same Router: If you are only going to access the DVR from a computer that is attached to the same router as the DVR you only need to setup the information
Allworx OfficeSafe Operations Guide Release 6.0 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy,
ivms-4500(windows Mobile) Mobile Client Software User Manual Version 1.0 Thank you for purchasing our product. This manual applies to ivms-4500 (Windows Mobile) mobile client software, please read it carefully
Appendix A. CMS(Client Management Software) A-1. Install CMS for Windows PC CMS is a program for communication between DVR and PC to control signal and video. Insert the enclosed CD, and go to CD-ROM Drive
Table of Contents Chapter 1. User Interface Overview...5 Chapter 2. Installation...6 2.1 Beginning Installation...6 2.2 Starting the CMS software...10 2.3 Starting it from the Start menu...10 2.4 Starting
1 Introduction Quick Start Guide GV-Redundant Server GV-Failover Server Welcome to the GV-Redundant Server / Failover Server Quick Start Guide. In the following sections, you will be guided through the
ivms-4500 (Android Tablet) Mobile Client Software User Manual (V3.0) Thank you for purchasing our product. This manual applies to ivms-4500 (Android Tablet) mobile client software; please read it carefully
Instruction for mobile monitor Remark: only the mobile phone with Windows Mobile and Symbian operating system can support the mobile phone monitor function. 1. DVR Setup Please login MAIN MENU>>>>>NETWORK,
ADTVision (ios) Mobile Client Software User Manual (V1.6) Thank you for purchasing our product. This manual applies to ADTVision (ios) mobile client software, please read it carefully for the better use
ivms-4500 (Android) Mobile Client Software User Manual (V3.1) UD.6L0202D1111A01 Thank you for purchasing our product. This manual applies to ivms-4500 (Android) V3.1 mobile client software; please read
Lorex Edge LH300 Series DVR: Frequently Asked Questions Monitor/Display: 2 Q: Why can t I see an image when I connect my monitor to the DVR? 2 Remote Access and Software: 3 Q: What is my ID and password?
Using TViX Network There are two network mode. One is SAMBA mode another is NFS mode. SAMBA mode : You can play the file via network without special program, but the speed is lower than NFS mode. ( Currently,
4CH/8CH Full D1 Full real-time USB DVR USER GUIDE Default User Name: admin Default Password: admin Main UI: 1 System info window 2 PTZ panel button 3 Alarm panel button 4 PTZ panel 5 Logon info panel 6
HDCVI Series DVR Quick Start Guide Version 1.1.0 Welcome Thank you for purchasing our HDCVI DVR! This quick start guide will help you become familiar with our HDCVI DVR in a very short time. Before installation
Network Video Monitor Software V220.127.116.11 Operation menu Chapter 1 Product Overview 1.1 Performance instruction Network video monitoring software is a centralized management tool for I8 protocol surveillance
DVR4x4RemoteViewer.book Page 3 Tuesday, February 15, 2005 9:19 AM DVR4C Remote Viewer Operation Manual Table of Contents EN 3 1. OVERVIEW...5 1.1 MINIMUM PC REQUIREMENTS...5 2. INSTALLING THE PROGRAM...5
Catalogue Basic Operation... 2 For Internet Explorer... 2 For Other Non-IE Web Browsers... 5 Camera Settings... 6 System... 6 About... 6 PT Setting... 7 Backup and Restore Setup... 8 NTP Setting... 8 System
Remote Client / Web Client USER MANUAL T Series Digital Video Recorder Remote Client Program... 3 Remote Client Program Installation... 4 Remote Client... 6 Main Window... 6 Site Registration... 7 Group
DVR User Manual For H.264-8-channel /16-channel digital video recorder All rights reserved CAUTION 2 Please read this user manual carefully to ensure that you can use the device correctly and safely We
IP Surveillance System User s manual IP Surveillance system Table of Contents TABLE OF CONTENTS TABLE OF CONTENTS...1 SYSTEM REQUIREMENT...3 INSTALLATION...4 1. MAIN CONSOLE...12 1.1 Start...14 1.2 Information
SD7000 Digital Microphone Monitor Software manual Table of Contents 1. Installing The Monitor Software 1.1 Setting Up Receivers For Monitoring 1.2 Running The Application 1.3 Shutdown 2. The Detail Monitoring
EverFocus Central Management Software for Networked Video Devices Management User s Manual Copyright EverFocus Electronics Corp. Release Date: January, 2013 Copyright 2012 EverFocus Electronics Corp. All
Table of Contents Page 1: Motion Detection 1.0 Configuring Motion Detection for LX Apollo / LX Zeus DVRs 2 1.1 Motion Playback on LX Apollo / LX Zeus DVRs 3 1.2 Scheduling Motion and Continuous Recording
DS-7204HVI-S Series Net DVR User Manual (V2.0) Thank you for purchasing Hikvision Net DVR. This manual applies to DS-7204HVI-S Series Net DVR. Please read it carefully for the better use of the product.
How to Remotely View Security Cameras Using the Internet Introduction: The ability to remotely view security cameras is one of the most useful features of your EZWatch Pro system. It provides the ability
IP EQUIPMENT WEB User manual V1.0 Thank you for purchasing our products,please contact with us anytime if you have any question or requirement. It is possible that there might be inaccurate places, inconsistencies
16CH H.264 DVR Mobile Monitoring Manual 2011 MAY V1.0 Supported operating systems CONTENTS Android - Mobile Monitoring Manual... 1 iphone - Mobile Monitoring Manual... 7 Symbian - Mobile Monitoring Manual...
Package Content DVR-4TL/8TL/16TL Setup Guide Inspect the DVR s packaging. Make sure that the DVR-4TL/8TL/16TL is packed properly. Remove all items from the box and make sure it contains the following items.
The client manual of IMSeye Mac This manual is the usage for the client software named IMSeye of the Apple Computer remotely accessing Zenointel s DVRs. 2012.Dec 目 录 目 录... 2 1 Installation... 3 1.1 Introduction...
Frequently Asked Questions Frequently Asked Questions are a quick and easy way to find the answers you need, however if you cannot find the information you are looking for, please contact us by email or