4CH/8CH Full D1 Full real-time USB DVR USER GUIDE

Transcription

1 4CH/8CH Full D1 Full real-time USB DVR USER GUIDE Default User Name: admin Default Password: admin

2 Main UI: 1 System info window 2 PTZ panel button 3 Alarm panel button 4 PTZ panel 5 Logon info panel 6 Function button group 7 Split screen button group 8 Record control panel 9 Exit and minimize 10 Play window User info, datetime info, disk space info, record type, version info Show/Hide PTZ panel Show Alarm panel Control PTZ, Up, Down, Left, Down, Auto, Iris, Zoom, Focus, Lamp, Wiper, Pres Current logon user info Channel set, system set, network set, log, playback, lock/unlock Select screen mode, full screen, roll, capture image Display record status and also for manuallly contrtol record Exit and minimize Display video, osd and for user to select channel Icon illustration: 1, PTZ Panel Direction Control Lamp Wiper

3 Preset Pos 2, Config buttons Call camera configuration dialog Call system configuration dialog Call network configuration dialog Call log view dialog Call playback dialog Lock and Unlock UI Click button, show the logon dialog: Logon: Input user name and password to logon DVR. After logon, the icon become, now the UI is unlocked.

4 Lock: When UI is unlocked, click to lock UI, the icon become, now the UI is locked. 3 UI control button 1,4,9,16,25 screen mode Full-screen mode Roll mode Capture still image Full-screen mode: Select full-screen. In full-screen mode, right click video panel, select the "exit full-screen" in the poped menu to back to normal screen mode. Roll mode: R oll to display video in 4-channel group for several seconds from the first to the last channel, the roll interval can be set in system configuration dialog. Capture still image: After select desired channel, capture to save image, user can set save path in storage configuration dialog. 4 Record control panel The system provides 2 type of record mode : manual and schedule. The record mode can be viewed in system info panel:

5 Manual Schedule Schedule mode: software enable or disable record automatically according to the schedule set in record settings dialog. the record control panel will display the record of each channel : white color means the channel is not recording now, green color means recording, red color means pre-recording. Application provides pre-record and delay-record technology to ensure that the complete course of accidental events can be recorded. For example : If user set motion detection record type for a channel, when there's no motion events, the channel is in the state of pre-recording, it doesn't write to disk. Once there's a motion event happened, the system will save the pre-recorded data to disk and then delayrecord for several seconds. Manual mode: Click buttons in record control panel will switch record mode to manual. User can start or stop record by operation in this panel. The record schedule will not work in manual mode. To switch back to schedule mode, you can select "Schedule" in record settings dialog. Start all channels' record Stop all channels' record 5 Play window control Left click or right click one channel can set the channel as current selected channel. After select desired channel, you can capture snapshots,control PTZ, preview live audio, and so on. Right click : Right click the desired screen to switch to other channel: "Full screen" to enter full screen mode.

6 "Select channel" to view the new selected channel in this video screen "Save image" to capture snapshot for selected channel, the save path refer to storage configuration dialog. Full screen mode, the right menu is as follow: "Exit full screen" restore to normal window. 5. Network Setup Click button Register Domain Name, The following dialog will appear;

7 Input the DDns Name, and click the button Register ; After about half or one minute, it will show Register success. Then you can use IE or our Client software to view the surveillance video.

8