more than a breaker it s a breakthrough Compact NSX

Transcription

1 Compact NSX, more than a breaker it s a breakthrough Compact NSX A

2 Intelligent outlook Today, we are living in an increasingly booming and fast changing world where energy is key. More than ever, the current situation compels each and everyone to achieve more while using less resources. As Global specialist in energy management, Schneider Electric innovates its new MCCB Compact NSX which is the optimum measurement and communication solution that meet your energy efficiency challenges through optimized energy consumption, increased energy availability and improved installation management. For the first time, you can monitor both energy and power, offering new performance in a remarkably compact device. Our main aim is to make energy safe, reliable and efficient.

3 Compact NSX more than a breaker Traditional Switch on/off the Protection against: > overload, > short circuit, > earth Isolation The Combine safety & performance: > Roto active technology, > New breaking Monitoring and Management > Integrated monitoring for all electrical parameters (I, V, E THD,... etc), > Accessibility of Better continuity of service > Improved discrimination, > Preventive Added simplicity > Torque limiting screws, > Green ready Ease of communication

4 Combine safety and performance Compact NSX is innovative it incorporates monitoring and communication functions, from 40 amps upward, combined with perfect protection. 23 new patents pending confirm the innovative character of Compact NSX Expert technology A roto-active contact breaking principle provides better limitation and endurance very high breaking capacity in a very small exceptional fault current limitation for extended system life. Reduced installation costs Achieve up to 30% total discrimination is ensured particulary in the case of miniature circuit breakers for considerable savings at the time of smaller devices mean more economical switchboards for a significant impact on overall cost of installation no need for over-calibration. NS400 NSX250 New breaking capacities New performance levels improve application 25kA standard low short-circuit level applications, e.g., in service 36-50kA standard applications (industrial plants, buildings and kA high performance at controlled 150kA demanding applications (marine). Enhanced protection for motors Compact NSX meets the requirements of IEC standards for protection of well adapted to motor-starting solutions up to 315kW at 400V, providing protection against short circuits, overloads, phase unbalance and set up additional protection systems for starting and braking with the motor running, reverse braking, jogging or reversing in complete used in conjonction with a Schneider Electric contactor; Compact NSX complies with the requirements of so-called type 2 coordination. NS160 (100 A) NSX100 Multi 9

5 Monitoring & management Compact NSX is a single device, which contains a monitoring unit to control energy consumption and power. Integrated A Micrologic electronic tripping device with next-generation sensors: > an "iron sensor for the power supply to the electronics, > an "air" sensor (Rogowski coils) for the measurement The originality lies in how Compact NSX measures, processes and displays data, either directly on screen, on the switchboard front panel, or via a monitoring system % Monitoring consumption can help reduce energy costs by as much as 10%. Accessibility of information To keep costs under control and ensure service continuity, relevant information must be available in real a kilowatt-hour meter helps optimise costs and their harmonic distortion rate shows the quality of electrical alarm notification secures operational control and maintenance event logs and tables, activated continuously, ensure the installed equipment base operates correctly, so energy efficiency is maximized. Installation supervision Used in conjunction with PowerLogic monitoring software, Compact NSX provides users with a set of parameters and tools to make it easy to monitor installations. ASIC Electronics (ASIC), independent of measurement, manage protection functions. The high degree of integration in electronics guarantees protection against conducted or radiated interference.

6 Better service continuity Compact NSX makes discrimination its main advantage in minimizing the impact of short circuits, ensuring service continuity for installations. Total With 30 years of experience and as an expert in discrimination, users can be sure of service continuity. Downstream circuit breaker trips as close as possible to the fault, so upstream circuit breaker is not overloaded. 100 % service continuity Service continuity Adding an SDX module remotes the trip or alarm condition of compact NSX breaker, ensuring total service The SDX module indicates tripping due to overload The module can be assigned to overload pre-alarm The module indicates ground fault trip. Preventive maintenance Maintenance indicators provide information on the number of operations, level of wear on contacts and total load rates. Maintenance is now preventive, avoiding faults. Direct access to maintenance indicators

7 Added simplicity Compact NSX takes the principles of easy installation and use which made its predecessor so successful to a higher level. Simple in Installers mount and wire Compact NSX in the same way as Compact NS, which makes engineering for a retrofit or extension Integration in help software, for parameter settings and switchboard installation, eases design. Simple to A Limited Torque Screw (LTS) system ensures proper installation of the tripping device, for added A transparent sealed flap protects access to tripping device switches and prevents settings from being New electrical control adjustment also has a transparent sealable cover to prevent it from being operated accidentally. Simple to Users customise alarms for all parameters, assign them to indicator lights, choose display priorities, and configure time delay thresholds and Continuously-activated event logs and tables, a wealth of information, enable users to ensure that the installed equipment base operates correctly, and to optimize settings. 65% time savings in installation compared with a classic monitoring solution. The green "Ready" LED flashes to show that all is well. LTS installation system Transparent protective cover

8 Ease of communication Pre-wired connectivity and plug and play interface modules allows easy integration with communication networking. BSCM Module Communication states and orders. Modbus IFM interface Interface with Modbus network. FDM 121 switch board display Direct access to essential Uses the sensors and processing capacity of the No special software or settings is required. NSX Plug and play cord cables Communication with switchboard display unit and/or the Modbus interface without parameter setting. Modbus IFM interface Modbus NSX cord FDM121 switchboard display unit Compact NSX + BSCM Module

9 Compact NSX, an optimum compitability with Ecodial V 3.4 Providing more expertise and time saving in your electrical design installations, Schneider Electric innovates special adapted software helping you to design solutions that meet the different business requirements. Ecodial V 3.4 is fully adapted to the local market The new version of the Ecodial is adapted for the Egyptian market & complies with the latest electrical standards. The selection of the electrical products & cables are complying with the local market needs. Cascading and discrimination calculations are based on the available sizes & ratings in the South African market. Ecodial V 3.4 new New A cable summary is at your The report now includes power sum Improvement of the motor starter Curve direct evolution: > save the tripping-curve and settings as an.rtf file > display the tripping-curves of thermal You can choose variable speed drives Ecodial V3.4 takes into account the tuning frequencies of detuning reactors as part of compensation Compact NSX Ecodial software Maximum control & energy measurement ; Ecodial V your efficient assistant for electrical installations.

10 Compact NSX Characteristics Common characteristics Rated voltages Insulation voltage (V) Ui 800 Impulse withstand voltage (kv) Uimp 8 Operational voltage (V) Ue AC 50/60 Hz 690 Suitability for isolation IEC/EN yes Utilisation category A Pollution degree IEC Control Manual With toggle With direct or extended rotary handle Electrical With remote control Versions Fixed Withdrawable Plug-in base Chassis Circuit breakers Breaking-capacity levels Electrical characteristics as per CEI/IEC Rated current (A) In 40 C Number of poles Breaking capacity (ka rms) Service breaking capacity (ka rms) lcu AC 50/60 Hz 220/240 V 380/415 V 440 V 500 V 525 V 660/690 V lcs AC 50/60 Hz 220/240 V 380/415 V 440 V 500 V 525 V 660/690 V Durability (C-O cycles) Mechanical Electrical 440 V In/2 In 690 V In/2 In Characteristics as per Nema AB1 Breaking capacity (ka rms) AC 50/60 Hz 240 V 480 V 600 V Characteristics as per UL 508 Breaking capacity (ka rms) AC 50/60 Hz 240 V 480 V 600 V Type of protection and applications MA magnetic TM-D Micrologic 2 Micrologic 5 / 6 A or E thermal-magnetic electronic 5 A or E 6 A or E 6 E-M classe Distribution and motors Distribution Generators Distribution Service connection (public distribution) Generators Motors (I only) Motors Distribution and generators Distribution and generators Motors

11 >30A >95 % T Ir (A) OFF Ig (x In) >30A Ir Cl. N Mode >95 % T Ir (A) OFF Ig (x In) Isd 1/A 2/B 3/C Iunbal tunbal Ijam tjam Ig A test OK Ir Cl. Isd Iunbal tunbal Ijam tjam Ig tg Mode N 1/A 2/B 3/C tg A test OK Ii=6500A IEC Ir 7.2Ir Class Isd NSX100 NSX160 NSX250 NSX400 NSX630 B F N H S L B F N H S L B F N H S L F N H S L F N H S L , 3, 4 2, 3, 4 2, 3, 4 3, 4 3, ,5 12, Circuit breakers and trip units COMPACT NSX 100/160/250 Ready Alarm E-M Micrologic 220 MA Distribution and motors COMPACT NSX 400/600 TM-D Distribution TM-G Generators 2.2 Distribution 2.2-AB Service connection (public distribution) 2.2-G Generators 2.2-M Motors 5.2 A Distribution and generators 5.2 E Distribution and generators 6.2 A Distribution and generators 6.2 E Distribution and generators 6.2 E-M Motors Ready Alarm Micrologic 6.3 E-M M Distribution and motors 2.3 Distribution 2.3-AB Service connection (public distribution) 1.3-M Motors (I only) 2.3-M Motors 5.3 A Distribution and generators 5.3 E Distribution and generators 6.3 A Distribution and generators 6.3 E Distribution and generators 6.3 E-M Motors

12 Schneider Electric South Africa (Pty) Ltd Head Office 1 River View Office Park, Janadel Avenue, Halfway Gardens, Midrand, 1685 Tel.: +27 (0) As standard specifications and designs change from time to time, please ask for confirmation of the information given in this publication. SEE / E