Mini-SMP. Mini-SMP. Features

Transcription

1 3Mini- SMP Interface Dimensions Code 8 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene E H G H B D C B A MALE Stecker F FEMALE Kuppler Male Stecker Female Kuppler dimension [mm] Smooth bore Full detent min. max. min. max. min. max. A B ) C 2.79 D E F G H ) Dimension to meet mechanical / electrical requirements connectors are extremely small coaxial connectors - approx. 70% of SMP size - for applications up to 65 GHz, mainly high-speed signal transmission, e.g. 0 or 40 Gbit/s. Plugs are available as smooth bore-versions - for plug-in technology and back plane applications - and as vibration-resistant full detent types for highest mechanical loads, e.g. in aerospace engineering. coaxial connectors are mateable with GPPO (Gilbert Engineering Co., Inc.) and SSMP (Connector Devices, Inc.) series. PCB connectors are supplied in blister tapes. -Steckverbinder sind extrem kleine Koaxial-Steckverbinder - 70% Baugröße im Vergleich zu SMP - für Anwendungen bis 65 GHz. Hauptanwendung ist die Übertragung von Hochgeschwindigkeitssignalen, z. B. bei 0 oder 40 Gbit/s. Stecker werden als Smooth bore-ausführung - für Einschubtechnik- und "Back Plane"-Anwendungen - und als vibrationsstabile Full detent-bauformen für höchste mechanische Beanspruchungen, z.b. in Luft- und Raumfahrt, angeboten. -Koaxial-Steckverbinder sind steckkompatibel mit den Steckverbinder-Serien GPPO (Gilbert Engineering Co., Inc.) und SSMP (Connector Devices, Inc.), PCB- Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert. Features Interface according to US MIL-STD 348A, Fig. 328 Frequency range DC to 65 GHz Return loss (cable connector straight) 6 DC to 26.5 GHz Impedance 50 Ω Minimum board-to-board distance 7.95 mm Snap-on coupling 40 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 260, D Tittmoning, Tel , Fax ,

2 Technology Technical Data Code 8 SMP Longwipe-SMP Applicable standards Anwendbare Normen Interface according to Interface gemäß MIL-STD-348A, Fig. 328 Mateable with GPPO (Gilbert Engineering Co., Inc) and SSMP (Connectors Devices, Inc) Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten MIL-STD-202 Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss Rückflussdämpfung Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Working voltage Betriebsspannung Mechanical data Mechanische Daten 50 Ω DC to 65 GHz 26 DC to 26.5 GHz GHz to 50 GHz 4 50 GHz to 65 GHz 0. x f (GHz) db 5 GΩ 6 mω 2 mω 325 V rms Mating cycles Steckzyklen Full detent: 00 Smooth bore: 500 Center contact captivation Innenleiter Haltekraft Engagement force Steckkraft Disengagement force Ziehkraft Board-to-board distance (min.) Board-to-Board Abstand (min.) Environmental data Umweltdaten axial: 7 N Full detent: 9 N Smooth bore: N Full detent: 29 N Smooth bore: N 7.95 mm Temperature range Temperaturbereich -55 C to +55 C Thermal shock Temperaturzyklen MIL-STD-202, Method 07, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 06 Vibration Vibration Shock Schock Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) Materials Materialien MIL-STD-202, Method 204, Condition B MIL-STD-202, Method 23, Condition A IEC 6760-, +260 C for 0 sec. Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Crimping ferrule Crimphülse Dielectric Dielektrikum Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe, Au plating CuZn / CuBe, Au plating CuZn / CuBe, Au plating Copper alloy, Au plating PTFE Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax , 4

3 Cable Connectors Cable Connectors Semi-Rigid Cables Straight Jack xordering Number Cable Group Assembly Instruction Packing Unit x8 K L A 00 Semi-Rigid Cables 6.6 ø3.2 x8 K L5 7 8 A ø3.5 Right Angle Jack xordering Number Cable Group Assembly Instruction Packing Unit x8 K L B Semi-Rigid Cables x8 K L5 7 8 B Cable Connectors - Flexible Cables Right Angle Jack, solder crimp xordering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit x8 K L5 0 8 C W Flexible Cables Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax ,

4 Panel Connectors/PCB Connectors Panel Connectors - Coaxial End SMP Longwipe-SMP Panel Plug xordering Number Remarks Assembly Instruction x8 S 0-5H0 E4 Full detent hermetic sealed 8 D 00 Packing unit PCB Connectors - SMD Straight Plug SMD xordering Number Version Remarks Panel Piercing / PCB Layout Packing Packing Unit x8 S 0-40M L5 economy Full detent Frequency: DC to 26 GHz, a = 3.4 mm B 204 VG 45.M blister, 500 tape & reel x8 S 02-40M L5 Full detent Frequency: DC to 65 GHz, a = 4.07 mm x8 S 4-40M L5 economy Smooth bore Frequency: DC to 26 GHz, a = 3.4 mm x8 S 42-40M L5 Smooth bore Frequency: DC to 65 GHz, a = 4.07 mm x8 S 43-40M L5 Smooth bore Frequency: DC to 65 GHz, a = 4.07 mm removable plastic cap on suction area for tape & reel B 209 VG 45.M blister, 500 tape & reel B 204 B blister 200 blister B 209 VG 45.M tape & reel 4 a Right Angle Plug xordering Number Remarks Panel Piercing Packing / PCB Layout x8 S M L5 x8 S M L5 Full detent Frequency: DC to 65 GHz Smooth bore Frequency: DC to 65 GHz Packing Unit B 203 VG 50.2M blister, 2500 tape & reel B blister SMD 4 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax , 43

5 Adaptors Masterpage-Wechsel: Right or Left (col) Adaptors Bullet female-female xordering Number Nominal Board-to- Bullet Length 2) Minimum Board-to- Board Distance ) Board Distance 3) Maximum Radial Tolerance 4) x8 K 0-K00 L mm a = 5.30 mm 7.94 mm 0.36 mm 00 x8 K 8-K04 L5 0. mm a = 7.37 mm 0.0 mm 5) 250 x8 K 04-K00 L5.22 mm a = 8.48 mm.2 mm 5) 500 x8 K 07-K00 L mm a = 0.97 mm 3.62 mm 5) 250 Packing Unit ø 2.76 a ) When standard SMD-connectors are applied (e.g. 8 S 0-40M, 8 S 4-40M). 2) Bullets with special lengths on request. 3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included. 4) The maximum radial tolerance compensation is calculated by: sin(4 ) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection. 5) The maximum radial tolerance is limited to 0.4 mm because of the limited guide in range of the second PCB connector. 44 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax ,

6 Adaptors (Inter Series) xordering Number Version Remarks Return Loss Packing Unit x08 S 8-S00 S3 straight RPC-.85 male - male 30 DC to 2 GHz 8 2 GHz to 50 GHz 5 50 GHz to 65 GHz 24.5 SMP Longwipe-SMP x08 S 8-K00 S3 straight RPC-.85 male - female 30 DC to 2 GHz 8 2 GHz to 50 GHz 5 50 GHz to 65 GHz 22.4 x08 K 8-S00 S3 straight RPC-.85 female - male 30 DC to 2 GHz 8 2 GHz to 50 GHz 5 50 GHz to 65 GHz 25.2 x08 K 8-K00 S3 straight RPC-.85 female - female 30 DC to 2 GHz 8 2 GHz to 50 GHz 5 50 GHz to 65 GHz 23 x02 S 8-S00 S3 straight RPC-2.92 male - male 30 DC to 2 GHz 26 2 GHz to 20 GHz 8 20 GHz to 40 GHz 26.2 ø 9 x02 S 8-K00 S3 straight RPC-2.92 male - female 30 DC to 2 GHz 26 2 GHz to 20 GHz 8 20 GHz to 40 GHz 26.2 ø 9 x02 K 8-S00 S3 straight RPC-2.92 female - male 30 DC to 2 GHz 26 2 GHz to 20 GHz 8 20 GHz to 40 GHz 25.2 ø 9 x02 K 8-K00 S3 straight RPC-2.92 female - female 30 DC to 2 GHz 26 2 GHz to 20 GHz 8 20 GHz to 40 GHz 25.2 ø 9 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax , 45

7 Terminations Masterpage-Wechsel: Right or Left (col) Terminations Termination Plug xordering Number Remarks Return Loss Packing Unit x8 S 5R-0.5 E3 0.5 Watt Frequency: DC to 40 GHz 26.4 DC to 8 GHz GHz to 26.5 GHz GHz to 40 GHz 8.3 ø3.6 Termination Jack xordering Number Remarks Return Loss Packing Unit x8 K 5R-0.5 E3 0.5 Watt Frequency: DC to 40 GHz 26.4 DC to 8 GHz GHz to 26.5 GHz GHz to 40 GHz 7.35 ø Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax ,

8 Tools Masterpage-Wechsel: Right or Left (col) Special Tools SMP Longwipe-SMP Extraction Tool xordering Number Remarks Packing Unit x8 W for connectors ca. 20 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 260, D Tittmoning, Tel , Fax , 47