Between Series Adapters
|
|
|
- Peregrine Hawkins
- 10 years ago
- Views:
Transcription
1 Between Series Adapters Between Series Coaxial Transmission Line Adapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent with good electrical performance. The small size, low VSWR, and broad frequency coverage permits a wide range of applications in both measurement and systems use. Design and Construction The standard units are constructed of stainless steel with passivated finish, nickel plated brass, and gold plated brass. The material and plating is to be consistent with the basic connector series. All dielectrics are TFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. Types The straight in-line adapters are available in many combinations of plug and jack (male and female) configurations. Also, popular panel mount versions are cataloged. For special modifications and hermetic seal version, consult Tyco Electronics. Application The major application is the requirement for a low VSWR, compact transition in both test system and operating systems. Many panel mount and bulkhead mount versions are available so the designer can use small size connectors for internal design, but adapt to a larger rugged version for external connection. Selection charts follow to help you find the correct adapter for your application. Plug-Plug QMA Series 1.0/2.3 SSMT SMP SMA SMB 7-16 BNC OSP Bulkhead OSP N Series MCX Page 253 N Series Page 253 BNC Page 253 Series 1.6/5.6 Page 253 Page 253 SMA/SMA 18 GHz Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Jack-Jack MCX N Series N Series Flange Mount N Series Bulkhead OSP OSP Bulkhead OSP Floating Rear Mount BNC BNC Bulkhead TNC TNC Flange Mount TNC Bulkhead N Series Page 254 BNC Page 254 Page 256 TNC Page 254 Page 254 SMA SMA Bulkhead Page 254 Page 255 Page 254 Page 254 Page 254 SMA 18 GHz and 255 and 256 and 255 Page 255 Page 255 Page 255 Series 1.0/2.3 Page SMB 75 OHM SMB SMP SSMT Series 1.0/2.3 Series 1.6/
2 Jack-Plug 7 mm 7 mm best VSWR MCX N Series N Series Flange Mount OSP OSP Bulkhead 7 mm Page 256 Page 256 Page 256 Page mm best VSWR Page 256 Page 256 MCX Page 256 BNC N Series N Series Flange Mount Page 256 Page 257 Page 257 Page 257 Page 257 OSP OSP Bulkhead Page 257 Page 257 BNC Page 257 Page 257 Page 257 Page 259 TNC TNC Flange Mount Page 258 Page 258 Page 258 Page 258 SMB 75 OHM SMB Page 259 Page 258 SMA Page 258 SMA Flange Mount Page 259 Page 258 and 259 SMA 18 GHz Page 260 Page 258 Page 259 Page 259 Page 259 Page 259 Page 259 SMP Page 260 SSMT Page 260 DIN-Series 1.0/2.3 Page 260 DIN-Series 1.6/5.6 Page 259 Page 260 QMA Page 260 UMCC Page 260 TNC SMB SMA SMA Flange Mount SMA 18 GHz SMP SSMT DIN-Series 1.0/2.3 DIN-Series 1.6/5.6 UMCC 252
3 Plug-Plug MCX Plug SMA Plug 7-16 Plug N Series Plug BNC Plug SMB Plug 19.3 [.760] 48.6 [1.912] [.562] 34.1 [1.343] [.250] Part No Ø 32.0 [1.260] Part No Part No SMA 18 GHz Plug N Series Plug 32.5 [1.281] SMA Plug SMB Plug 21.9 [.862] SMA Plug SMP Plug 17.5 [.690] Ø 21.0 [.828] Part No [.250] Part No Part No SMA Plug SSMT Plug SMA Plug OSP Plug Series 1.6/5.6 Plug Series 1.0/2.3 Plug 13.7 [.538] 17.0 [.670] Ø 6.5 [0.26] 9.2 [0.36] 1) ) [1.10] 8.9 [0.35] Part No Part No Part No Coupling Type A 1) Detent for jack BNC Plug Series 1.6/5.6 Plug QMA Plug SMA Plug Ø 14.5 [0.57] [1.20] 4 [1.83] SMA Plug 0 [0.31] QMA Plug 8.70 [0.34] Part No Part No
4 Jack-Jack 7-16 Jack N Series Jack 51.0 [2.010] BNC Jack SMB Jack 32.1 [.562] [1.265] 12.9 [.508] BNC Jack 75 ohm SMB Jack 30.4 [1.197] 3.82 [.150] 12.0 Across [.472] Flat 17.4 [.687] 15.8 [.625] Ø 12.9 [.508] Part No Part No Part No TNC Jack N Series Flange Mount Jack 49.1 [1.932] 2.0 [.080] 16.7 [.656] [1.00] TNC Jack BNC Jack 43.1 [1.698] MCX Jack SMA Jack 15.6 [.615] 4 Plcs. [.718] Ø 14.5 [.572] [.250] Part No Part No Part No SMA Jack N Series Jack 31.3 [1.231] Ø [.687] Part No SMA Jack N Series Flange Mount 4.7 Max. [.187] Panel 31.3 [1.231] 4 Plcs. Part No [.718] [1.00] SMA Jack N Series Bulkhead Jack 6.3 Max. [.250] Panel 3.2 Ø 22.0 [.866] 31.3 [1.232] 22.0 [.867] 13.6 [.534] Ø 15.9 [.625] Part No SMA Jack BNC Jack [.562] 33.5 [1.320] BNC Bulkhead Jack SMA Jack 1 [.703] 3.2 Max. Panel 33.5 [1.320] 5.6 [.220] Ø 12.7 [.500] TNC Flange Mount Jack SMA Jack 2.4 [.093] 8.0 [.315] 17.4 [.687] 12.7 [.500] 15.9 [.625] 17.4 [.687] Ø [.437] 4.8 [.188] Max. Panel Part No Part No Part No
5 Jack-Jack (Continued) SMA Jack TNC Bulkhead Jack Max. [.250] Panel 3.2 Ø 16.7 [.656] 33.0 [1.300] 14.3 [.562] 5.0 [.196] Ø 11.2 [.439] Part No SMB Jack SMA Jack 17.8 [.700] [.250] Part No SMA Jack SMP Jack 12.6 [.498] 4.70 [.187] Part No SMA Jack SSMT Jack 12.9 [.508] Part No Max. Panel OSP Jack SMA Bulkhead Jack 5.8 [.230] 17.3 [.680] Part No Ø [ ] SMA 18 GHz Jack N Series Jack Ø 17.4 [.687] 31.2 [1.229] Part No [.650] 2.0 [.080] SMA 18 GHz Jack N Series Flange Mount Jack 31.2 [1.229] 4 Plcs. [.718] SMA 18 GHz Jack N Series Bulkhead Jack 31.3 [1.232] 6.3 Max. [.250] Panel [.867] 13.6 [.534] Ø 15.9 [.625] OSP Jack SMA Jack 14.1 [.554] 4.7 Max. [.187] Panel Ø 16.0 [.630] Max. Ø 22.0 [.866] Ø 7.6 [.300] Part No Part No Part No Max. Panel [.250] 14.1 [.554] SMA Jack OSP Bulkhead Jack [.437] [.437] Part No Ø [ ] Ø 9.4 [.372] OSP Floating Flange Mount Jack SMA Jack 1.7 [.065] 3.2 Max. Panel 22.2 [.874] 14.2 [.560] 9.7 [.380] Ø 2.6 [.102] 2 Plcs. Part No Ø [ ] Ø 14.2 [.560] SMA Jack OSP Floating Rear Mount Jack 22.2 [.874] Ø [ ] Ø 7.6 [.300] 11.2 ±.076 [.440 ±.003] Ø [ ] [ ] Part No
6 Jack-Jack (Continued) BNC Jack Series 1.6/5.6 Jack Series 1.0/2.3 Jack Series 1.6/5.6 Jack Ø 9.6 [0.38] Ø 8.2 [0.32] Ø 4.1 [0.16] Ø 8.2 [0.32] Ø 14.5 [0.57] Ø [1.79] M9.0x0.5 [0.35]x[0.02] 39.4 [1.55] Part No Part No Coupling Type A, B, F Jack-Plug N Series Plug to 7 mm Jack Ø 22.4 [.880] OSP Plug to 7 mm Jack [.437] Ø 22.1 [.870] TNC Plug to 7 mm Jack Ø 22.4 [.880] 43.3 [1.705] Part No [1.208] Part No [.625] 40.9 [1.610] Part No SMA Flange Mount Plug to 7 mm Jack 4 Plcs. Ø 22.4 [.880] SMA Plug to 7 mm Jack Ø 22.4 [.880] N Series Plug to 7 mm Best VSWR Jack Ø 22.4 [.880] 2.1 [.083] 2.4 Max. [.093] Panel 35.0 [1.380] 31.8 [1.25] 43.3 [1.705] Part No Part No Part No TNC Plug to 7 mm Best VSWR Jack Ø 22.4 [.880] MCX Jack SMA Plug 16.8 [.660] N Series Jack 7 mm Plug Ø 22.4 [.880] 15.9 [.625] 40.9 [1.610] [.250] 36.7 [1.445] Part No Part No Part No
7 Jack-Plug (Continued) N Series Jack 7 mm Best VSWR Plug BNC Plug N Series Jack Ø 22.4 [.880] Ø 16.8 [.660] N Series Jack TNC Plug 51.9 [2.043] 36.7 [1.445] 52.7 [2.076] Ø 16.8 [.660] Ø 15.9 [.625] Part No Part No Part No SMA Plug N Series Jack 32.8 [1.292] Max. SMA 18 GHz Plug N Series Jack 32.3 [1.270] SMA Plug N Series Flange Mount Jack 4 Plcs [1.270] Ø [.687] Ø 17.4 [.687] [.718] 4.7 Max. [.187] Panel Part No Part No Part No OSP Jack 7 mm Plug SMA Plug OSP Jack SMA Plug OSP Bulkhead Jack 29.6 [1.166] Ø 22.4 [.880] 17.4 [.685] Ø 7.6 [.300] [.250] 3.2 Max. Panel 17.4 [.686] Ø [ ] [.437] [.437] Part No Part No Part No BNC Jack N Series Plug 49.1 [1.934] BNC Jack SMB Plug 35.8 [1.408] SMA Plug BNC Jack 34.6 [1.362] Ø 21.0 [.827] [.562] [.562] Part No Part No Part No
8 Jack-Plug (Continued) TNC Jack 7 mm Plug Ø 22.4 [.880] TNC Jack 7 mm Best VSWR Plug Ø 22.4 [.880] TNC Jack N Series Plug 49.1 [1.934] 41.3 [1.625] Part No [1.625] Part No Ø 21.0 [.827] Part No TNC Flange Mount Jack SMA Plug SMA Plug SMB Jack SMA Jack MCX Plug 2 [1.038] 2.0 [.080] 13.4 [.529] 17.4 [.687] 12.7 [.500] 20.7 [.815] [.716] Ø 11.8 Max. [.465] [.250] [.250] Part No Part No Part No SMA 18 GHz Jack N Series Plug 31.5 [1.250] SMA Jack BNC Plug 31.8 [1.250] TNC Plug SMA Jack Ø 21.0 [.828] Part No [.562] Part No Ø 15.9 [.625] Part No SMA Jack SMB Plug 19.3 [.760] [.250] Part No SMA Jack SMP Plug 14.2 [.560] Part No SMA Jack SSMT Plug 10.5 [.413] Part No
9 Jack-Plug (Continued) 14.0 [.551] 10.0 [.393] SMA Jack UMCC Plug Ø 6.25 [.246] 5.6 [.220] 14.0 [.551] 10.0 [.393] SMA Jack UMCC Plug Ø 6.25 [.246] 5.6 [.220] SMA Flange Mount Jack 7 mm Plug Dia. 4 Plcs. Ø 22.4 [.880] Ø 5.3 [.208] Ø 2.6 [.102] 1/4-36UNS Ø 5.3 [.208] Ø 2.5 [.098] 1/4-36UNS 2.0 [.080] [1.200] [.925] Part No Part No Part No SMA 18 GHz Jack 7 mm Plug Ø 22.4 [.880] 11.7 [.461] 2.0 [.080] N Series Flange Mount Plug SMA 18 GHz Jack 31.8 [1.250] 4 Plcs. [.718] OSP Plug SMA Jack [.250] 13.7 [.538] 30.9 [1.216] Max. [.250] Panel Ø 12.7 [.500] Panel Hole Ø 7.6 [.300] Part No Part No Part No SMA 18 GHz Jack OSP Bulkhead Plug SMP Jack SMA Plug SSMT Jack SMA Plug 11.4 [.447] 1.7 [.065] 19.3 [.760] 3.2 Max Panel Ø [ ] SMA Plug 16.0 [.632] 0 SMA Plug 16.2 [.639] SSMT Jack [.437] OSMP Jack Part No Part No Part No BNC Jack Series 1.6/5.6 Plug BNC Plug Series 1.6/5.6 Jack Series 1.6/5.6 Plug Series 1.0/2.3 Jack Ø 14.5 [0.57] Ø 11.0 Ø 9.6 [0.38] 45.4 [1.79] Ø 14.5 [0.57] 44.3 [1.74] Ø 8.2 [0.32] 9.2 [0.36] 1) 33.0 [1.30] Ø 4.1 [0.16] Part No Part No Part No Coupling Type A, B2, F2 259
10 Jack-Plug (Continued) Series Plug 1.0/2.3 Series 1.6/5.6 Jack QMA Jack SMA Plug UMCC Jack SMA Plug Ø 6.5 [0.26] Ø 8.2 [0.32] [0.85] 1.10 [.043] [.417] 8.0 [.315] 8.9 [0.35] 1) 34.5 [1.36] QMA Jack 6.35 [0.25] SMA Plug 0 [0.31] Ø 2.00 [.078] 1) Detent for jack 2 Only jackside Part No Coupling Type A, B2, F2 Part No Part No UMCC Jack SMA Plug 1.10 [.043] [.417] 8.0 [.315] Ø 1.90 [.074] Part No
General Information. Lower Frequency Models Custom Designs Special Flanges Narrow Band Specials VSWR. Frequency ( GHz) COMMON SPECIFICATIONS
Waveguide Adapters General Information DC - 26.5 GHz High Performance 1.15 Typical VSWR Male or Female Connectors available Choke Flange Types available -65 o C to +125 o C Operating Temperature Midwest
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
RF Connector Solutions
RF Connector Solutions C o n n e c t i n g I n n o v a t i o n t o A p p l i c a t i o n Winchester Electronics was established in 1941 and is today a global leader in the design, development, and deployment
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
Index. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
SMA Series Subminiature RF Connectors
SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com
N type Coaxial Connectors
N type Coaxial Connectors N Series Features 1. 50 ohms wide varieties standard connectors 2. Screw on locking 3. High durability 4. Applicable standard: MI-C-39012/MI STD 348-304 Products guide s Straight
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
- Lower cost than a custom solution - Faster than a custom solution; many cables are available from distributor stock - Guaranteed performance
Cable Assemblies Amphenol Connex offers a full line of pre-assembled, fixed-length cable assemblies. Fixed length assemblies are for use in a variety of commercial and industrial applications that require
BNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
RF Test Accessories Catalog. Adapter
RF Test Accessories Catalog Adapter Frequency Ranges INTRODUCTION - Inter and intra series coaxial adapters and waveguide-to-coaxial adapters are some of the more common components used in RF, microwave
Cable Assemblies. And Value- Added Services. Connect Here. (978) 927-1060 www.deltarf.com. Click to see:
Cable Assemblies And Value- Added Services (978) 927-1060 www.deltarf.com Click to see: Cable Assemblies The Cable Designer Other Value-Added About Delta The engineering, production, and testing expertise
ELECTRICAL CHARACTERISATION OF SEMI-RIGID COAXIAL CABLES WITH SMA AND K CONNECTORS. Carmen Diez Rafael García Juan Daniel Gallego.
ELECTRICAL CHARACTERISATION OF SEMI-RIGID COAXIAL CABLES WITH SMA AND K CONNECTORS March 2005 TECHNICAL REPORT C.A.Y. 2005-4 ABSTRACT Semi-rigid coaxial transitions are normally used in closed cycle refrigerators
S-Level and Hi-Rel Connectors... 94. Power Rating for Coaxial Connectors... 98. Mounting Guidelines For Flange Mount Connectors...
Index... Page S-Level and Hi-Rel... 94 Power Rating for Coaxial... 98 Mounting Guidelines For Flange Mount... 102 Mating Microwave... 105 RF Versus Microwave SMA... 106 EMI/RFI Shielding Standards... 108
Waveguide Coaxial Transitions
Waveguide Coaxial Transitions Coaxial Adaptors RA SERIES The Waveguide Solution offers a standard range of Waveguide to Coaxial Adaptors. All designs have been optimised to offer high performance within
www.tvsat.com.pl COAXICON Series Mobile Phone Switching Coax Connectors RF Coax Connectors Product Facts
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
Test and measurement cable assemblies
Test and measurement cable assemblies 1 Company Profile Simply Your Best Connection Technical information and sales contacts are available at : Radiall is a global leader in the design, development and
Tyco Electronics Corporation
RF Coax Products Introduction Product Facts Listed under the Component Program of Underwriters Laboratories Inc., R File No. E-81956 as indicated by Product Family Recognized under the Component Program
Why is Passive Intermodulation Important?
Precision Products for Demanding Applications Low PIM Products for Distributed Antenna Systems and Wireless Infrastructure Low PIM Coaxial Cable Assemblies Plenum Rated, Low PIM, Low Loss Coaxial Cable
AlwaysThinking. RF and Microwave Coaxial Connectors and Cable Assemblies
AlwaysThinking RF and Microwave Coaxial Connectors and Cable Assemblies Always thinking of ways to give you more At San-tron, we re rethinking every angle of microwave connector design and manufacturing
Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
Application Guide to RF Coaxial Connectors and Cables
Application Guide to RF Coaxial Connectors and Cables By: Michael J. Hannon Product Applications Engineer and Pat Malloy, Sr. Applications Engineer There is a wide variety of coaxial connectors and cables
BNC Connectors (50 ohm/75 ohm)
BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors
Cable Number Locator
HOW TO USE THIS MAUAL This manual is organized first by General/Guardian Cable cable groups and second by the types of RFI connectors available for those groups. The connectors are divided into subgroups
W1 Connector W1 Adapter W1 Termination
Data Sheet W1 Connector W1 Adapter W1 Termination DC to 110 GHz A complete coaxial connector system with mode-free performance to 110 GHz Features Excellent RF Performance to 110 GHz 50Ω Impedance Low
Test Cable Assemblies
Test Cable Assemblies and Coaxial Passive Components DC-65 GHz 8851 SW Old Kansas Ave. Stuart, FL 34997 USA +1-772-286-9300 +1-800-544-5594 [email protected] www.emc-rflabs.com Premium Test Cable Lab-Flex
ULTIMATE SNAP-N-SEAL
ULTIMATE SNAP-N-SEAL F Series Compression Connectors Thomas & Betts introduces the Ultimate Snap-N-Seal Compression Connector, the newest addition to the Snap-N-Seal system. Look for the classic design
5 Waveguide to Coaxial Adapters
5 Waveguide to Coaxial Adapters 5.1 Waveguide to Coaxial Adapter-Right Angle HengDa Microwave manufactures Waveguide to Coaxial Adapters covering a full frequency range for Rectangular Waveguides, with
Mini-DINs. Low PIM Cable Assemblies and Coaxial Adapters. Always Thinking
TM Mini-DINs (4.1/9.5) Now Available Low PIM Cable Assemblies and Coaxial Adapters Always Thinking TM The remedy to the PIM problem In response to the growing problem that PIM presents to cellular base
Making a Case for a New Connector
Research on an Optimal Design for QMA and QN Connectors IEEE, Feature Article in Microwave Magazine February, 2008 Volume: 9 Issue:1 The emergence of Quick Lock connectors, particularly Quick Lock versions
EMC Test Chamber Solutions RF Cable Assemblies and Connectors
EMC Test Chamber Solutions RF Cable Assemblies and Connectors RF CABLE ASSEMBLY AND CONNECTOR SOLUTONS FOR EMC MMUNTY AND EMSSON COMPLANCE TESTNG E X T N T R A T E D E P T H --> POWER LEVEL: -40.00 dbm
The SMA RF Connector and Associated Tools Whitham D. Reeve
The SMA RF Connector and Associated Tools Whitham D. Reeve 1. Introduction This article briefly reviews the SMA connector and tools commonly used with it. The SMA designation denotes Sub-Miniature version
New! Pomona expands their selection of RF cable assemblies and connectors. www.pomonaelectronics.com
New! Pomona expands their selection of RF cable assemblies and connectors Introducing New RF cable assemblies and connectors RF cable assemblies and connectors are used for connection in communications,
SMA. 78 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, [email protected], www.rosenberger.com
coaxial connectors are high quality screw-on coupling connectors with defined maximum torque and feature high reliability, long service life, high mechanical stability and excellent electrical characteristics,
Welcome to Amphenol RF s training module focused on RF interconnect for wireless RF modules and machine to machine (or M2M) applications.
Welcome to Amphenol RF s training module focused on RF interconnect for wireless RF modules and machine to machine (or M2M) applications. 1 Amphenol RF is a leading interconnect supplier to manufacturers
Cable Assemblies. Cable Assemblies
Cable Assemblies Cristek designs and manufactures semi-rigid and flexible microwave coaxial cable assemblies for interconnect and instrumentation applications from DC to 65 GHz. Contact Cristek early in
WAVEGUIDE COMPONENT Specifications and Design Handbook. Edition #7
WAVEGUIDE COMPONENT Specifications and Design Handbook Edition #7 CONTINENTAL MICROWAVE DIVISION Integrated Waveguide Assemblies Waveguide components are just the beginning. Continental Microwave Division
MAURY. VNA Calibration Kits, Microwave Components & Adapters. Calibrate With Confidence IN THIS CATALOG:
MAURY VNA Calibration Kits, Microwave Components & Adapters IN THIS CATALOG: VNA Calibration Kits Calibration Standards Coaxial & Waveguide Adapters Connector Gage Kits Air Lines Torque Wrenches Manual
PERFORMANCE AND VALUE FOR YOUR DAY-TO-DAY TEST APPLICATIONS.
Rosenberger RFlex Cables PERFORMANCE AND VALUE FOR YOUR DAY-TO-DAY TEST APPLICATIONS. Features and Benefits Microwave test cable performance at a fraction of the cost Excellent performance over a broad
Table of Contents. 4 General Information. 5 Definition of Parameters. 8 General Specifications. 9 Low Loss Cable Design and Construction
CABLE ASSEMBLIES Emerson Network Power Connectivity Solutions has a wide range of cable assemblies and connectors suited for RF, Microwave and Fiber Optic signal transmission. Connectivity Solutions is
Outside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
spinner Measurement & Calibration equipment for network analyzers
spinner Measurement & Calibration equipment for network analyzers Edition B 2011 High Frequency Performance Worldwide www.spinner-group.com SPINNER test & calibration equipment for best measurement results
Cables. Accessories. For Force, Torque and Strain Sensors
Accessories Cables For Force, Torque and Strain Sensors Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater
RF cables. Edition 2015
RF cables Edition 2015 Developed for highest expectations Your partner for system solutions HUBER+SUHNER is a leading international producer and supplier of electrical and optical interconnectivity components
Microwave Components. J & N Microwave and Engineering. Product Catalogue 2010 Version 2.0
Product Catalogue 2010 Version 2.0 Contents Contact Details i Waveguide Loads/Terminations 1 Low Power Short Waveguide Terminations 2 Medium Power Short Waveguide Terminations 3 Higher Power Waveguide
218 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, [email protected], www.rosenberger.com
coaxial connectors are reliable screw-on connectors with high degree of protectionand excellent intermodulation. Due to their mechanical stability and weather resistance connectors are suitable for outdoor
Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
MIL-PRF-39012 QPL Connectors MIL-PRF-55339 QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
SMK (2.92 mm) Connectors High Performance to 40 GHz Click here for Table of Contents Click here for Specifications
SMK (2.92 mm) Connectors High Performance to 40 GHz Click here for Table of Contents Click here for Specifications PDF Volume 1 Connect Here. (978) 927-1060 www.deltarf.com (978) 927-1060 FX (978) 922-6430
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
Measurement & Modeling Device Characterization Solutions
Also Available from Maury Microwave Measurement & Modeling Device Characterization Solutions Featuring The Most Complete Selection of Load Pull Solutions in the Test & Measurement Industry Helping Your
The Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
Semi-rigid Coaxial Cables
50 Ohm RF Coaxial Cables Semi-rigid Coaxial Cables SR034 SR047/M17 SR086 /M17 SR086-25 SR086-75 SR090-25 SR141 SR141-25 SR141-35 SR141-75 SR250 SR250-75 147 Semi-rigid Coaxial Cabless SR034 Inner conductor
db MISER ULTRA LOW LOSS CABLE ASSEMBLIES Are you a design or test engineer fighting a challenging loss budget?
db MISER ULTRA LOW LOSS ASSEMBLIES Are you a design or test engineer fighting a challenging loss budget? Consider db Miser ultra low loss cable assemblies. High performance materials, careful attention
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
TRAPEZE NETWORKS EXTERNAL ANTENNA OPTIONS
TRAPEZE NETWORKS EXTERNAL ANTENNA OPTIONS 2.4 GHz BAND INDOOR / OUTDOOR 60 0 Sector 120 0 Sector 180 0 Sector 360 0 Omni ANT-1060 ANT-1120 ANT-1180 ANT-1060R ANT-1120R ANT-1180R 5 GHz BAND INDOOR / OUTDOOR
Catalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
JITAI Technology Co., LTD. Your 1 st Partner. Product Catalog. Microwave Passive Device Design and Manufacture
Technology Co., LTD. Your 1 st Partner Product Catalog Microwave Passive Device Design and Manufacture CONTENTS Rotary Joints Single Channel Rotary Joints Microwave Passive Device Design and Manufacture
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
SMA Waterproof. Cable Assembly. Filtered Audio Connector. Dataport Receptacle. Dataport Plug
INTERCONNECT SOLUTIONS FOR RUGGEDIZED COMMUNICATIONS GPS Antenna Gooseneck Adapter TNC Waterproof Cable Assembly Communication radios often carry critical public safety information and must operate reliably
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
50 Ohm Low Loss, High Performance Coaxial Cable
50 Ohm Low Loss, High Performance Coaxial Cable in.195,.240 and.400 sizes (with convenient connector reference included) CBL-CU195 Replacement for RG-58 and RG-142 cables Center Conductor Dielectric Foil
Amphenol Connecting People and Technology. Amphenol RF Europe. RF/Microwave Coaxial Connectors
Amphenol Connecting People and Technology Amphenol RF Europe RF/Microwave Coaxial Connectors Applicable s Group 01 141/ 303/ 58/ 58A/ B7806A/ LMR195/ KX15/ M17-28/ L190-16/ L910-30 01A 142/ 142A/ 142B/
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
Penn Engineering PENN. Quality Microwave Components ENGINEERING. ~since 1971~ (661) 295-2080. 29045 Avenue Penn Valencia, California 91355-5426
Penn Engineering C O M P O N E N T S Quality Microwave Components ~since 1971~ 2 Established in California in 1971, Penn Engineering has many years of Experience and Knowledge in Designing and Manufacturing
Cinch Connectivity Solutions. High Frequency End Launch Connectors
Cinch Connectivity Solutions High Frequency End Launch Connectors Applications High Frequency SMA End Launch Connectors For Microwave PC Board Substrates The Johnson Patent Pending High Frequency End Launch
Furniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
9000 Series Accelerometers Specifications
Technical Data 9000 Series Accelerometers Specifications Catalog Numbers EK-43781I, EK-43782I, EK-46255I, EK-45890I, EK-43784I, EK-47086I, EK-43792I, EK-47090I, EK-43799I, EK-43794I, EK-43795I, EK-43797I,
CONTENTS. Elmika warrants each product of its manufacture to be free from defects in material and workmanship.
CONTENTS Directional Couplers 1 Magic Tee Hybrid Couplers 2 Fixed Attenuators 3 Level Set attenuators 4 Direct Reading Attenuators 5 E-Plane Bends 6 H-Plane Bends 7 Straight Sections 8 Twists 9 Terminations
PCb Cable mount twinax. ConneCtorS
PCb Cable mount twinax ConneCtorS technical CharaCteriStiCS SPeCiFiCationS temperature rating: -55 C to + 125 C Corrosion: MIL-STD-202 Method 101, Test Condition B Shock: MIL-STD-202 Method 213, Test Condition
T.V. & VIDEO CONNECTORS
T.V. & VIDEO CONNECTORS No.MTV-245LS MALE No.MTV-045LS FEMALE No.MTV-245FS MALE QUICK TERMINATE FULL SHILDED COAXIAL CONNECTORS 13 7 OPEN UP RECOMMENDED CABLE STRIPPING DIM'S PUSH THE CABLE!! SHUT DOWN
Optolite Indicators. General Purpose INDICATOR LIGHTS. Sub-Miniature. Miniature, Neon
Sub- Lockwasher, stainless steel or steel, nickel plate. Brass T-1 sub-midget flange base. See Selection Guide. Assembly mounts from front of panel. All mounting hardware Approximately.12 oz. less lamp.,
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. [email protected] - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
MOBILE BROADBAND WIRELESS ANTENNAS
MOBILE BROADBAND WIRELESS ANTENNAS RUGGED SOLUTIONS FOR MOBILE APPLICATIONS n Permanent, Temporary and Covert Installations n Wideband and Multi-band Technologies n Voice, Video and Data Support n Supporting
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
RF & Microwave Interconnects. trucorporation.com
trucorporation.com RF & Microwave Interconnects The TRU Corporation was founded in 1949 to supply the RF connector marketplace with precision designed and manufactured connectors. At that time, the U.S.
Disabled Toilet Alarm. Contractor Pack. Installation & Operating Instructions
Disabled Toilet Alarm Installation & Operating Contractor Pack Installation & Operating Instructions 1 Overview The Channel Safety Systems Disabled Toilet alarm contractor Packs are an efficient way of
Waveguide to Coax Adapters Description
Index 182 WA D110 XX01 WA D1 XX01 WA D250 XXH1 WA D250 XX01 WA D350 XXH1 WA D350 XX01 WA D4 XXH1 WA D4 XX01 WA D500 XXH1 WA D500 XX01 WA D650 XXH1 WA D650 XX01 WA D0 XXH1 WA D0 XX01 WA H062 XX01 WA H067
.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
Universal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
General Interconnect Range. High Phase Stability. Custom Solutions
General interconnect INTRODUCTION RADIALL, one of the world's leading manufacturers of coaxial connectors, has also been designing and manufacturing high performance coaxial cables and for more than 15
Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
