Modular/F.R.L. Units

Transcription

1 odular/.r.l. nits eries Round type pressure gauge (with color zone) R L 9 29

2 odular.r.l. nits eries Improved visibility for lubricant drip with graduation for lubricant control raduation Improved installation racket with spacer Retainer pacer with bracket Lever pin q ttach the component into the fitting of the spacer with bracket. w Lock the lever pin into the retainer. (temporary installation) mbedded pressure gauge is a standard feature. olt loat type auto drain with excellent operability is used for compact models (/). rain cock is easy-to-use rotary type. Ozone resistant rubber material (R) Improved relief sensitivity e Tighten the bolt. Round type pressure gauge (with color zone) type Red and green zones offer improved visibility of pressure control range. reen indicator Indicator adjusts to highlight preferred range Red indicator ilter Regulator () to 6() ist eparator Regulator to icro ist eparator Regulator to 296 Regulator R() to 6().R.L. nit to 6 ( R L) to 6 ( L) to 6 ( R) to ( R) to ( )

3 eries onfiguration Product x.8 3/ Page ir ilter Regulator Lubricator R L ilter Regulator Lubricator L 6-6 ir ombination ir ilter Regulator R ir ilter ist eparator Regulator R 6 2 R ilter Regulator ist eparator L

4 eries onfiguration Product x.8 3/ Page ir ilter ist eparator icro ist eparator R R R R2 Regulator R R R-6 3 R R6 R R Regulator with ackflow unction R2 R R R-6 R 3 R6 298

5 eries onfiguration Product x.8 3/ Page L L L Lubricator L L L-6 3 L L6 ilter Regulator ilter Regulator with ackflow unction ist eparator Regulator 38 icro ist eparator Regulator imple pecials ystem hort lead times This system enables us to respond to your special needs, such as additional machining, accessory assembly, or modular unit, and deliver such special products as quickly as standard products. Repeat orders Once we receive a imple pecial part number from your previous order, we will process the order, manufacture the product, and deliver it to you. 38 system designed to respond quickly and easily to your special ordering needs. 299 R L 9

6 ir ombination ir ilter Regulator Lubricator to 6 I ymbol ow to Order ir ilter Regulator Lubricator 3 Option/emi-standard: elect one each for a to m. Option/ttachment/emi-standard symbol: hen more than one specification is required, indicate in alphanumeric order. xample) -3-T-36R ote 3) Option emi-standard ttachment Thread type a b c d e f g h loat type auto drain Pressure gauge igital pressure switch heck valve Pressure switch T-interface 3-port valve for residual pressure release et pressure ote ) owl ymbol ote ) ote 2) ote ) ote ) T ote 6) ithout auto drain loat type auto drain (..) loat type auto drain (.O.) escription etric thread () Rc PT 3/ ithout pressure gauge quare embedded type pressure gauge (with limit indicator) Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: P output / lectrical entry: iring bottom entry Output: P output / lectrical entry: iring top entry Output: PP output / lectrical entry: iring bottom entry Output: PP output / lectrical entry: iring top entry ithout attachment ounting position: RL ithout attachment ounting position: RL ithout attachment ounting position: TRL ithout attachment ounting position: RL. to.8 Pa setting.2 to.2 Pa setting Polycarbonate bowl etal bowl ylon bowl etal bowl with level gauge ith bowl guard ylon bowl with bowl guard ody size 2 6 ote )

7 ir ombination eries to 6 emi-standard i j k l m ilter ote 8) drain port Lubricator lubricant exhaust port xhaust mechanism low direction Pressure unit ymbol ote 9) ote ) ote ) rain guide is PT (applicable to the ) and PT (applicable to the 2 to 6). The auto drain port comes with ø" one-touch fitting (applicable to the 2 to 6). ote 2) rain guide is (applicable to the ) and (applicable to the 2 to 6). ote 3) Option, are not assembled and supplied loose at the time of shipment. ote ) ot available with piping port size: 6. ote ) The bracket position varies depending on the T- interface or pressure switch mounting. ote ) 3 R ithout drain cock Lubricator with drain cock Relieving type on-relieving type low direction: Left to right low direction: Right to left escription ith drain cock rain guide rain guide rain cock with barb fitting: or ø6 x ø nylon tube ame plate and pressure gauge in imperial units: Pa ote 2) Z ame plate, caution plate for bowl, and pressure gauge in imperial units: psi, ote 3) Z igital pressure switch: ith unit conversion function ote 6) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of.2 Pa or more. hen the pressure gauge is attached, a.2 Pa pressure gauge will be fitted. ote ) Refer to hemical ata on page 28 when selecting a case material. ote 8) loat type auto drain: The combination of and is not possible. ote 9) ithout a valve function ote ) etal bowl: The combination of 2 and 8 is not possible. ote ) ilter drain port: hen choosing with, the drain cock of a lubricator will be with barb fittings. ody size 2 6 ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote ) ote 2) or thread type: and PT. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) The digital pressure switch will be equipped with the unit conversion function, setting to psi initially. Pa and psi are shown together on the pressure unit. ote 3) or options:, 2, 3,. This product is for overseas use only according to the new easurement Law. (The I unit is provided for use in apan.) ote ) : or thread type: and PT only ote ) : elect with options:, 2, 3,. tandard pecifications ir filter omponent Regulator Lubricator R L x.8 /6 R L, R2 L, R L, R L,, R-6 L-6 3/ R L 3/, R L6 R6 L6 ote ) Pressure gauge port size luid ote 2) mbient and fluid temperature Proof pressure ax. operating pressure et pressure range Relief pressure ominal filtration rating Recommended lubricant owl material owl guard Regulator construction ass (kg) ir to 6 (with no freezing). Pa. Pa. to. Pa. to.8 Pa emi-standard et pressure. Pa ote 3) [at relief flow rate of. l/min (R)] µm lass turbine oil (IO 32) Polycarbonate tandard Relieving type ote ) Pressure gauge connection threads are not available for.r.l. unit with a square embedded type pressure gauge or with a digital pressure switch ( to 6). ote 2) to for the products with the digital pressure switch ote 3) ot applicable to the. R L 9

8 eries to 6 low haracteristics (Representative values) ondition: Inlet pressure. Pa x.8 Rc 2 Rc Outlet pressure (Pa) Outlet pressure (Pa) Outlet pressure (Pa) low rate (l/min (R)) 6 low rate (l/min (R)) low rate (l/min (R)).6 Rc.6 Rc -6.6 Rc3/ Outlet pressure (Pa) Outlet pressure (Pa) Outlet pressure (Pa) low rate (l/min (R)) low rate (l/min (R)) low rate (l/min (R)).6 Rc.6 Rc 6.6 Rc Outlet pressure (Pa) Outlet pressure (Pa) Outlet pressure (Pa) low rate (l/min (R)) 6 low rate (l/min (R)) 6 low rate (l/min (R)) Pressure haracteristics (Representative values) Outlet pressure (Pa) Outlet pressure (Pa).2 et point Inlet pressure (Pa).2. et point Outlet pressure (Pa) Outlet pressure (Pa) onditions: Inlet pressure. Pa, Outlet pressure.2 Pa, low rate l/min (R) et point Inlet pressure (Pa) et point 2 Outlet pressure (Pa) Outlet pressure (Pa).2.2. et point Inlet pressure (Pa) et point Inlet pressure (Pa) Inlet pressure (Pa) Inlet pressure (Pa) 2

9 ir ombination eries to 6 Pressure haracteristics (Representative values) Outlet pressure (Pa).2.2. et point Outlet pressure (Pa).2.2. onditions: Inlet pressure. Pa, Outlet pressure.2 Pa, low rate l/min (R) et point 6 Outlet pressure (Pa).2.2. et point Inlet pressure (Pa) Inlet pressure (Pa) Inlet pressure (Pa) pecific Product Precautions e sure to read before handling. Refer to front matters 2 and for afety Instructions and pages 28 to 29 for.r.l. Precautions. aution ounting and djustment. knob cover is available to prevent careless operation of the knob. Refer to page 389 for details. arning Piping. hen mounting a check valve, make sure the arrow (I side) points in the correct direction of air flow. aution ir upply. se an air filter with µm or less filtration rating on the inlet side of the valve to avoid any damage to the seat caused by dust when mounting a 3-port valve for residual pressure release on the inlet side. arning election. loat type auto drain Operate under the following conditions to avoid malfunction. <.O. type> Operating compressor:. k ( l/min (R)) or more. hen using 2 or more auto drains, multiply the value above by the number of auto drains to find the capacity of the compressors you will need. or example, when using 2 auto drains,. k ( l/min (R)) of the compressor capacity is required. Operating pressure:. Pa or more. <.. type> Operating pressure for :. Pa or more. Operating pressure for 3/:. Pa or more. 2. se a regulator or filter regulator with backflow function when mounting a 3-port valve for residual pressure release on the I side to ensure the release of the residual pressure. Otherwise, residual pressure will not be fully released. aution. hen releasing air at the intermediate position using a T- interface on the inlet side of the lubricator, lubricant may back flow. Therefore, releasing air that does not contain traces of lubricant is not possible. To release air that does not contain traces of lubricant, use a check valve ( series) on the inlet side of the lubricator to prevent a backflow of the lubricant. 2. If a residual pressure-release 3-port valve is mounted on the inlet side of the lubricator, causing a backflow of air, it can result in a backflow of oil or damage to internal parts. Please do not use it in this fashion. 3. n.r.l. unit shipped from the plant has its model number labeled. owever, components that are combined together during the distribution process do not have a label on them. R L 9 3

10 O O eries to 6 imensions, P2 (Pressure gauge port size) 2 to 6 P2 (Pressure gauge port size) R2 R2 I Q I Q R Q Q2 R Q rain ir ilter Regulator Lubricator 2 x P () learance for maintenance rain ir ilter Regulator Lubricator L 2 x P () learance for maintenance pplicable model to 6 to 6 to 6 Option quare embedded type pressure gauge igital pressure switch Round type pressure gauge Round type pressure gauge (with color zone) imensions enter of piping enter of piping enter of piping pplicable model, 2 to 6 Optional/emi-standard specifications ith auto drain (..) etal bowl ith drain guide ith auto drain (.O./..) etal bowl etal bowl with level gauge ith drain guide rain cock with barb fitting imensions x.8.o.: lack..: ray ø one-touch idth across flats fitting idth across flats arb fitting pplicable tubing: T tandard specifications P P2 x.8,,,,, 3/ 3/, / ote) quare type pressure gauge Optional specifications igital pressure switch 39 Round type pressure gauge ø26 ø3. ø3. ø Round type pressure gauge (with color zone) ø3. ø3. ø Optional specifications emi-standard specifications racket mount ith auto drain ith barb fitting ith drain guide etal bowl Q Q2 R R ø. ø. ote) or the only, the position of the pressure gauge is above the center of the piping. ø ø ø9 ø9 ø ø ø etal bowl with level gauge

11 ir ombination ilter Regulator Lubricator to 6 I ymbol ow to Order ilter Regulator Lubricator 3 Option/emi-standard: elect one each for a to l. Option/ttachment/emi-standard symbol: hen more than one specification is required, indicate in alphanumeric order. xample) R emi-standard ttachment Option 6 ote 3) Thread type a b c d e f g h loat type auto drain Pressure gauge igital pressure switch heck valve Pressure switch 3-port valve for residual pressure release et pressure ote ) owl ilter regulator ote 8) drain port ymbol ote ) ote 2) ote ) ote 6) ote 9) ote ) ithout auto drain loat type auto drain (..) loat type auto drain (.O.) escription etric thread () Rc PT 3/ ithout pressure gauge quare embedded type pressure gauge (with limit indicator) Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: P output / lectrical entry: iring bottom entry Output: P output / lectrical entry: iring top entry Output: PP output / lectrical entry: iring bottom entry Output: PP output / lectrical entry: iring top entry ithout attachment ounting position: L ithout attachment ounting position: L ithout attachment ounting position: L. to.8 Pa setting.2 to.2 Pa setting Polycarbonate bowl etal bowl ylon bowl etal bowl with level gauge ith bowl guard ylon bowl with bowl guard ith drain cock rain guide rain guide rain cock with barb fitting: or ø6 x ø nylon tube ody size 6 ote )

12 ir ombination eries to 6 emi-standard i j k l Lubricator lubricant exhaust port xhaust mechanism low direction Pressure unit ymbol 3 R ote ) Z ote 2) Z ote ) rain guide is PT (applicable to the ) and PT (applicable to the to 6). The auto drain port comes with ø" one-touch fitting (applicable to the to 6). ote 2) rain guide is (applicable to the ) and (applicable to the to 6). ote 3) Option, are not assembled and supplied loose at the time of shipment. ote ) ot available with piping port size: 6. ote ) The bracket position varies depending on the pressure switch mounting. ithout drain cock Lubricator with drain cock Relieving type on-relieving type low direction: Left to right low direction: Right to left escription ame plate and pressure gauge in imperial units: Pa ame plate, caution plate for bowl, and pressure gauge in imperial units: psi, igital pressure switch: ith unit conversion function ote 6) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of.2 Pa or more. hen the pressure gauge is attached, a.2 Pa pressure gauge will be fitted. ote ) Refer to hemical ata on page 28 when selecting a case material. ote 8) loat type auto drain: The combination of and is not possible. ote 9) ithout a valve function ote ) etal bowl: The combination of 2 and 8 is not possible. ody size 6 ote 3) ote 3) ote 3) ote 3) ote 3) ote 3) ote ) ote ) ote ) ote ) ote ) ote ) or thread type: and PT. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) The digital pressure switch will be equipped with the unit conversion function, setting to psi initially. Pa and psi are shown together on the pressure unit. ote 2) or options:, 2, 3,. This product is for overseas use only according to the new easurement Law. (The I unit is provided for use in apan.) ote 3) : or thread type: and PT only ote ) : elect with options:, 2, 3,. tandard pecifications omponent ote ) Pressure gauge port size luid ote 2) mbient and fluid temperature Proof pressure aximum operating pressure et pressure range Relief pressure ominal filtration rating Recommended lubricant owl material owl guard Regulator construction ass (kg) ilter regulator Lubricator L x.8 /6. to. Pa. L, ote ) Pressure gauge connection threads are not available for.r.l. unit with a square embedded type pressure gauge or with a digital pressure switch ( to 6). ote 2) to for the products with the digital pressure switch ote 3) ot applicable to the. ir to 6 (with no freezing). Pa. Pa et pressure. Pa ote 3) [at relief flow rate of. l/min (R)] emi-standard.9 L, L,, µm. to.8 Pa lass turbine oil (IO 32) Polycarbonate Relieving type -6-6 L-6 3/ tandard 6 L 3/, 6 6 L R L 9

13 O R2 O eries to 6 imensions, P2 (Pressure gauge port size) P2 (Pressure gauge port size) to 6 2 x P () 2 x P () R2 I Q I Q Q Q2 R Q R rain ilter Regulator Lubricator learance for maintenance rain ilter Regulator Lubricator learance for maintenance pplicable model Option to 6 quare embedded type pressure gauge igital pressure switch to 6 to 6 Round type pressure gauge Round type pressure gauge (with color zone) imensions enter of piping enter of piping enter of piping pplicable model, to 6 Optional/emi-standard specifications ith auto drain (..) etal bowl ith drain guide ith auto drain (.O./..) etal bowl etal bowl with level gauge ith drain guide rain cock with barb fitting imensions x.8.o.: lack..: ray ø one-touch idth across flats fitting idth across flats arb fitting pplicable tubing: T6-6 6 tandard specifications P P2 ote) x.8 /6,,,, 3/ 3/, quare type pressure gauge Optional specifications igital pressure switch Round type pressure gauge ø26 ø3. ø Round type pressure gauge (with color zone) ø3. ø Optional specifications emi-standard specifications racket mount ith auto drain ith barb fitting ith drain guide etal bowl Q Q2 R R ø. ø. ote) The total length of dimension is the length when the filter regulator knob is unlocked. 8 ø ø9 ø9 ø ø etal bowl with level gauge

14 ir ombination ir ilter Regulator to 6 I ymbol ow to Order ir ilter Regulator 3 Option/emi-standard: elect one each for a to j. Option/ttachment/emi-standard symbol: hen more than one specification is required, indicate in alphanumeric order. xample) -3--6R emi-standard ttachment Option 3 ote 3) Thread type a b c d e f g loat type auto drain Pressure gauge igital pressure switch Pressure switch T-interface 3-port valve for residual pressure release et pressure ote ) owl ilter ote 8) drain port ymbol ote ) ote 2) ote ) ote ) T ote ) ote 6) ote 9) ote ) ithout auto drain loat type auto drain (..) loat type auto drain (.O.) escription etric thread () Rc PT 3/ ithout pressure gauge quare embedded type pressure gauge (with limit indicator) Round type pressure gauge (without limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: P output / lectrical entry: iring bottom entry Output: P output / lectrical entry: iring top entry Output: PP output / lectrical entry: iring bottom entry Output: PP output / lectrical entry: iring top entry ithout attachment ounting position: R ounting position: TR ithout attachment ounting position: R ounting position: R. to.8 Pa setting.2 to.2 Pa setting Polycarbonate bowl etal bowl ylon bowl etal bowl with level gauge ith bowl guard ylon bowl with bowl guard ith drain cock rain guide rain guide rain cock with barb fitting: or ø6 x ø nylon tube ody size 2 6

15 ir ombination eries to 6 emi-standard ote ) rain guide is PT (applicable to the ) and PT (applicable to the 2 to 6). The auto drain port comes with ø" one-touch fitting (applicable to the 2 to 6). ote 2) rain guide is (applicable to the ) and (applicable to the 2 to 6). ote 3) Option, are not assembled and supplied loose at the time of shipment. ote ) The bracket position varies depending on the T- interface or pressure switch mounting. tandard pecifications omponent ote ) Pressure gauge port size luid h ote 2) mbient and fluid temperature Proof pressure aximum operating pressure et pressure range Relief pressure ominal filtration rating owl material i j owl guard Regulator construction ass (kg) xhaust mechanism low direction Pressure unit ir filter Regulator ymbol R Relieving type on-relieving type low direction: Left to right low direction: Right to left R x.8 /6. to. Pa.6 ote ) The regulator is equipped with a backflow function in this configuration. dditionally, for safety purposes, please check that the pressure in the outlet side is turned to the atmospheric pressure once the pressure in the outlet side is exhausted, by using a pressure gauge, etc. ote 6) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of.2 Pa or more. hen the pressure gauge is attached, a.2 Pa pressure gauge will be fitted. ote ) Refer to hemical ata on page 28 when selecting a case material. ote 8) loat type auto drain: The combination of and is not possible. ote 9) ithout a valve function R, emi-standard. escription ame plate and pressure gauge in imperial units: Pa ote ) Z ame plate, caution plate for bowl, and pressure gauge in imperial units: psi, ote 2) Z igital pressure switch: ith unit conversion function 2 R2, ote ) etal bowl: The combination of 2 and 8 is not possible. ote ) or thread type: and PT. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) The digital pressure switch will be equipped with the unit conversion function, setting to psi initially. Pa and psi are shown together on the pressure unit. ote 2) or options:, 2, 3,. This product is for overseas use only according to the new easurement Law. (The I unit is provided for use in apan.) ote 3) : or thread type: and PT only ote ) : elect with options:, 2, 3,. ote ) Pressure gauge connection threads are not available for.r.l. unit with a square embedded type pressure gauge or with a digital pressure switch ( to 6). ote 2) to for the products with the digital pressure switch ote 3) ot applicable to the. R, R,, ir to 6 (with no freezing). Pa. Pa et pressure. Pa ote 3) [at relief flow rate of. l/min (R)] µm Polycarbonate Relieving type -6-6 R-6 3/ tandard R 3/,. to.8 Pa ody size 2 6 ote 3) ote 3) ote 3) ote 3) ote 3) ote 3) ote 3) ote 3) ote ) ote ) ote ) ote ) ote ) ote ) ote ) 6 R R6 R L 9 3

16 O O eries to 6 imensions, R2 P2 (Pressure gauge port size) 2 to 6 R2 P2 (Pressure gauge port size) I I Q Q2 R Q Q Q R 2 x P () 2 x P () rain ir ilter Regulator learance for maintenance rain ir ilter Regulator learance for maintenance pplicable model to 6 to 6 Option quare embedded type pressure gauge igital pressure switch Round type pressure gauge to 6 Round type pressure gauge (with color zone) imensions enter of piping enter of piping enter of piping pplicable model, 2 to 6 Optional/emi-standard specifications ith auto drain (..) etal bowl ith drain guide ith auto drain (.O./..) etal bowl etal bowl with level gauge ith drain guide rain cock with barb fitting imensions x.8 idth across flats.o.: lack..: ray ø one-touch fitting idth across flats arb fitting pplicable tubing: T tandard specifications P P2 x.8 /6,,,,, 3/ 3/, ote) quare type pressure gauge Optional specifications igital pressure switch 39 Round type pressure gauge ø26 ø3. ø3. ø Round type pressure gauge (with color zone) ø3. ø3. ø Optional specifications emi-standard specifications racket mount ith auto drain ith barb fitting ith drain guide etal bowl Q Q2 R R ø. ø. ote) or the only, the position of the pressure gauge is above the center of the piping. 32 ø ø ø9 ø9 ø ø ø etal bowl with level gauge

17 ir ombination ir ilter ist eparator Regulator to I ymbol ow to Order ir ilter ist eparator Regulator 3 Option/emi-standard: elect one each for a to j. Option/ttachment/emi-standard symbol: hen more than one specification is required, indicate in alphanumeric order. xample) -3--6R ymbol escription ody size 2 ote 3) Option emi-standard ttachment Thread type a b c d e f loat type auto drain Pressure gauge igital pressure switch Pressure switch T-interface 3-port valve for residual pressure release et pressure ote ) owl ilter g ist separator ote 8) drain port h xhaust mechanism ote ) ote 2) ote ) ote ) T ote ) ote 6) ote 9) ote ) ithout auto drain loat type auto drain (..) loat type auto drain (.O.) Rc PT 3/ ithout pressure gauge quare embedded type pressure gauge (with limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: P output / lectrical entry: iring bottom entry Output: P output / lectrical entry: iring top entry Output: PP output / lectrical entry: iring bottom entry Output: PP output / lectrical entry: iring top entry ithout attachment ounting position: R ounting position: TR ithout attachment ounting position: R ounting position: R. to.8 Pa setting.2 to.2 Pa setting Polycarbonate bowl etal bowl ylon bowl etal bowl with level gauge ith bowl guard ylon bowl with bowl guard ith drain cock rain guide rain guide rain cock with barb fitting: or ø6 x ø nylon tube Relieving type on-relieving type 3

18 ir ombination eries to ymbol escription ody size 2 emi-standard omponent ote ) Pressure gauge port size luid ote 2) mbient and fluid temperature Proof pressure aximum operating pressure inimum operating pressure et pressure range Relief pressure ominal filtration rating Outlet side oil mist concentration ote 3) Rated flow (l/min (R)) owl material i j owl guard Regulator construction ass (kg) low direction Pressure unit ir filter ist separator Regulator R ote ) rain guide is PT (applicable to the ) and PT (applicable to the to ). The auto drain port comes with ø" one-touch fitting (applicable to the to ). ote 2) rain guide is (applicable to the ) and (applicable to the to ). ote 3) Option, are not assembled and supplied loose at the time of shipment. ote ) The bracket position varies depending on the T- interface or pressure switch mounting. tandard pecifications low direction: Left to right low direction: Right to left ame plate and pressure gauge in imperial units: Pa ote ) Z ame plate, caution plate for bowl, and pressure gauge in imperial units: psi, ote 2) Z igital pressure switch: ith unit conversion function ote ) The regulator is equipped with a backflow function in this configuration. dditionally, for safety purposes, please check that the pressure in the outlet side is turned to the atmospheric pressure once the pressure in the outlet side is exhausted, by using a pressure gauge, etc. ote 6) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of.2 Pa or more. hen the pressure gauge is attached, a.2 Pa pressure gauge will be fitted. ote ) Refer to hemical ata on page 28 when selecting a case material. ote 8) loat type auto drain: The combination of and is not possible. ote 9) ithout a valve function R, emi-standard. 2 R2, ir to 6 (with no freezing). Pa. Pa. Pa. to.8 Pa et pressure. Pa [at relief flow rate of. l/min (R)] : µm, :.3 µm (99.9% filtered particle size) ax.. mg/m 3 ote ) ote ) (R) (.8 ppm).88 R, Polycarbonate Relieving type.9 tandard ote 3) ote 3) ote 3) ote 3) ote ) ote ) ote ) ote ) ote ) etal bowl: The combination of 2 and 8 is not possible. ote ) or thread type: PT. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) The digital pressure switch will be equipped with the unit conversion function, setting to psi initially. Pa and psi are shown together on the pressure unit. ote 2) or options:, 2, 3,. This product is for overseas use only according to the new easurement Law. (The I unit is provided for use in apan.) ote 3) : or thread type: PT only ote ) : elect with options:, 2, 3,. R,, R-6 ote ) Pressure gauge connection threads are not available for.r.l. unit with a square embedded type pressure gauge or with a digital pressure switch ( to ). ote 2) to for the products with the digital pressure switch. ote 3) onditions: ist separator inlet pressure:. Pa; The rated flow varies depending on the inlet pressure. eep the air flow within the rated flow to prevent an outflow of lubricant to the outlet side. ote ) hen the compressor oil mist discharge concentration is mg/m 3 (R). ote ) owl O-ring and other O-rings are slightly lubricated. 3/.83 R L 9 3

19 O O eries to imensions 2 to -6 R2 P2 (Pressure gauge port size) R2 P2 (Pressure gauge port size) Q I I Q Q2 Q Q R 2 x P () R 2 x P () rain ir ilter rain ist Regulator eparator learance for maintenance rain ir ilter rain ist eparator Regulator learance for maintenance pplicable model to -6 Option quare embedded type pressure gauge igital pressure switch Round type pressure gauge Round type pressure gauge (with color zone) imensions enter of piping enter of piping enter of piping pplicable model 2 to -6 Optional/emi-standard specifications ith auto drain (..) etal bowl ith drain guide ith auto drain (.O./..) etal bowl etal bowl with level gauge ith drain guide rain cock with barb fitting imensions x.8 idth across flats.o.: lack..: ray ø one-touch fitting idth across flats arb fitting pplicable tubing: T6 2-6 tandard specifications P P2,,,,, 3/ ote) quare type pressure gauge Optional specifications igital pressure switch 39 Round type pressure gauge ø3. ø3. ø Round type pressure gauge (with color zone) ø3. ø3. ø Optional specifications emi-standard specifications racket mount ith auto drain ith barb fitting ith drain guide etal bowl Q Q2 R R ø. ote) or the only, the position of the pressure gauge is above the center of the piping. 36 ø ø ø9 ø etal bowl with level gauge

20 ir ombination ilter Regulator ist eparator to I ymbol ow to Order ilter Regulator ist eparator 3 Option/emi-standard: elect one each for a to j. Option/ttachment/emi-standard symbol: hen more than one specification is required, indicate in alphanumeric order. xample) -3--6R ymbol escription ody size emi-standard ttachment Option 38 ote 3) Thread type a b c d e f loat type auto drain Pressure gauge igital pressure switch Pressure switch 3-port valve for residual pressure release ilter regulator g ist separator ote 8) drain port h i et pressure ote ) owl xhaust mechanism low direction ote ) ote 2) ote ) ote ) ote 6) ote 9) ote ) R ithout auto drain loat type auto drain (..) loat type auto drain (.O.) Rc PT 3/ ithout pressure gauge quare embedded type pressure gauge (with limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: P output / lectrical entry: iring bottom entry Output: P output / lectrical entry: iring top entry Output: PP output / lectrical entry: iring bottom entry Output: PP output / lectrical entry: iring top entry ithout attachment ounting position: ithout attachment ounting position: ounting position:. to.8 Pa setting.2 to.2 Pa setting Polycarbonate bowl etal bowl ylon bowl etal bowl with level gauge ith bowl guard ylon bowl with bowl guard ith drain cock rain guide rain guide rain cock with barb fitting: or ø6 x ø nylon tube Relieving type on-relieving type low direction: Left to right low direction: Right to left

21 ir ombination eries to ymbol escription ody size emistandard j Pressure unit ote ) rain guide is PT (applicable to the ) and PT (applicable to the to ). The auto drain port comes with ø" one-touch fitting (applicable to the to ). ote 2) rain guide is (applicable to the ) and (applicable to the to ). ote 3) Option, are not assembled and supplied loose at the time of shipment. ote ) The bracket position varies depending on the pressure switch mounting. tandard pecifications omponent ote ) Pressure gauge port size luid ote 2) mbient and fluid temperature Proof pressure aximum operating pressure inimum operating pressure et pressure range Relief pressure ominal filtration rating ote 3) Rated flow (l/min (R)) Outlet side oil mist concentration owl material owl guard Regulator construction ass (kg) ilter regulator ist separator ame plate and pressure gauge in imperial units: Pa ote ) Z ame plate, caution plate for bowl, and pressure gauge in imperial units: psi, ote 2) Z igital pressure switch: ith unit conversion function ote ) The regulator is equipped with a backflow function in this configuration. dditionally, for safety purposes, please check that the pressure in the outlet side is turned to the atmospheric pressure once the pressure in the outlet side is exhausted, by using a pressure gauge, etc. ote 6) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of.2 Pa or more. hen the pressure gauge is attached, a.2 Pa pressure gauge will be fitted. ote ) Refer to hemical ata on page 28 when selecting a case material. ote 8) loat type auto drain: The combination of and is not possible. ote 9) ithout a valve function, emi-standard., ir to 6 (with no freezing). Pa. Pa. Pa. to.8 Pa et pressure. Pa [at relief flow rate of. l/min (R)] : µm, :.3 µm (99.9% filtered particle size) 3 ax.. mg/m 3 ote ) ote ) (R) (.8 ppm). Polycarbonate Relieving type,, tandard.38 ote 3) ote 3) ote 3) ote ) ote ) ote ) ote ) etal bowl: The combination of 2 and 8 is not possible. ote ) or thread type: PT. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) The digital pressure switch will be equipped with the unit conversion function, setting to psi initially. Pa and psi are shown together on the pressure unit. ote 2) or options:, 2, 3,. This product is for overseas use only according to the new easurement Law. (The I unit is provided for use in apan.) ote 3) : or thread type: PT only ote ) : elect with options:, 2, 3, ote ) Pressure gauge connection threads are not available for.r.l. unit with a square embedded type pressure gauge or with a digital pressure switch ( to ). ote 2) to for the products with the digital pressure switch ote 3) onditions: ist separator inlet pressure:. Pa; The rated flow varies depending on the inlet pressure. eep the air flow within the rated flow to prevent an outflow of lubricant to the outlet side. ote ) hen the compressor oil mist discharge concentration is mg/m 3 (R). ote ) owl O-ring and other O-rings are slightly lubricated. 3/. R L 9 39

22 O R2 O eries to imensions to -6 P2 (Pressure gauge port size) P2 (Pressure gauge port size) 2 x P () 2 x P () R2 I Q I Q Q Q2 R Q R rain ilter Regulator rain ist eparator learance for maintenance rain ilter Regulator rain ist eparator learance for maintenance pplicable model to -6 Option quare embedded type pressure gauge igital pressure switch Round type pressure gauge Round type pressure gauge (with color zone) imensions enter of piping enter of piping enter of piping pplicable model to -6 Optional/emi-standard specifications ith auto drain (..) etal bowl ith drain guide ith auto drain (.O./..) etal bowl etal bowl with level gauge ith drain guide rain cock with barb fitting imensions x.8 idth across flats.o.: lack..: ray ø one-touch fitting idth across flats arb fitting pplicable tubing: T6-6 tandard specifications P P2 ote),,,, 3/ quare type pressure gauge Optional specifications igital pressure switch Round type pressure gauge ø3. ø Round type pressure gauge (with color zone) ø3. ø Optional specifications emi-standard specifications racket mount ith auto drain ith barb fitting ith drain guide etal bowl Q Q2 R R ø. ote) The total length of dimension is the length when the filter regulator knob is unlocked. 3 ø ø9 ø etal bowl with level gauge

23 ir ombination eries Options/ttachments Options/ttachments Part o. Option ection Pressure gauge ote ) ttachment Type Round type Round type (with color zone) quare ote 2) embedded type igital pressure switch ote ) loat type auto drain pacer tandard.2 to.2 Pa setting tandard.2 to.2 Pa setting tandard.2 to.2 Pa setting P output/iring bottom entry P output/iring top entry PP output/iring bottom entry PP output/iring top entry.o... heck valve ote 6) ote ) Pressure switch ote ) T-interface ote 6) ote ) 3-port valve for residual pressure release ote ) Piping adapter ote ) Pressure switch with piping adapter ote ) ross spacer ote ) or or or 2--R 2--R ote 3) Y Y- - Y- or or or or or 2 Y - ( 2) I- Y2- ( 2) I- 2 3 Y2-2 or 2 or 2 or L L 38 3 Y -( ) 2 I- Y3-( ) I- 3 Y3-2 or or or or or Part no. or or or or or L L 3- [3P- (Pressure gauge cover only)] 3-2 [3P- (Pressure gauge cover only)] I--2-L [I--2- (witch body only)] ote ) I-R-2-L [I-R-2- (witch body only)] ote ) I--6-L [I--6- (witch body only)] ote ) I-R-6-L [I-R-6- (witch body only)] ote ) 8 Y -( 2) 3 I- Y-( 2) I- 3 6 Y- 2 3 or -6 or -6 or -6 or -6 or -6 Y I- Y-( 2) Y- 3 or or or Y6-3 ( ) - 6 or or Y6 I-6 Y6-( 3) 6-6 or 6 or 6 or 6 ote ) in part numbers for a round pressure gauge indicates a type of connection thread. o indication is necessary for R; however, indicate for PT. Please contact regarding the connection thread PT and pressure gauge supply for psi unit specifications. ote 2) Including one O-ring and 2 mounting screws ote 3) tandard pressure gauge ote ) Lead wire with connector (2 m), adapter, lock pin, O-ring ( pc.), mounting screw (2 pcs.) are attached. [ ]: witch body only. lso, regarding how to order the digital pressure switch, please refer to page 388. ote ) inimum operating pressure:.o. type. Pa;.. type. Pa () and. Pa (3/). Please contact for psi and unit specifications. ote 6) or.r.l. units, port sizes without ( ) are standard specifications. ote ) eparate interfaces are required for modular unit. heck alve: (),, check valve with intermediate air release port can be easily installed to prevent a backflow of lubricant when redirecting the air flow and releasing the air on the outlet side of the regulator. Thread type y-pass port size pecifications ymbol escription 2 3 Rc PT ffective area (mm 2 ) 28 e sure to use above check valves when redirecting the air flow on the inlet side of the lubricator. Threads for I and ports are not machined. ody size I I ymbol y-pass port size for redirecting air flow y-pass port size,,, heck valve 3 pplicable model, 2, 2,, ote) ote) pressure switch cannot be mounted on the -6. Refer to the attachment table above for standard by-pass port sizes applicable to the. 32 R L 9

24 eries Pressure witch: () compact integrated pressure switch can be easily installed and facilitates the pressure detection of the line. I I ymbol Pressure switch Option ote) This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) pecifications ymbol P ote) X2 X2-P ote) X X-P ote) X2 X2-P ote) luid mbient and fluid temperature Proof pressure aximum operating pressure et pressure range (when O) ysteresis witch haracteristics Lead wire length. m. m. m. m 3 m 3 m 3 m 3 m ontact point configuration aximum contact point capacity Operating voltage:, aximum operating current escription et pressure range. to. Pa. to. Pa. to.6 Pa. to.6 Pa. to. Pa. to. Pa. to.6 Pa. to.6 Pa Pressure display Pa Pa/psi dual scale Pa Pa/psi dual scale Pa Pa/psi dual scale Pa Pa/psi dual scale ir to 6 (with no freezing). Pa. Pa. to. Pa.8 Pa or less a 2 (), 2 () or less 2 to 2, : m 8, : m, : m ote) or detailed specifications on the I series, please refer to series I in est Pneumatics o.6. ody size 6 I- I- I- I- I ote) eparate spacers are required for modular unit. 23 enter of.r.l. body pplicable model 2, -6,, 6 T-interface: (T) x.8,,,, sing a T-interface facilitates the redirection of air flow. Octagon T-interface enter of.r.l. body aution on ounting If a T-interface is used on the I side of the lubricator, lubricant may be mixed. se the series check valve to avoid such possibility. 322 Y- Y2- Y2-2 Y3- Y3-2 Y- 2 Y- 3 Y- 2 Y- 3 Y6-3 Y6- x pplicable model,,, 2, 2, 2,,,,, -6, -6-6,, 6,,, 6 ote ) in model numbers indicates a thread type. o indication is necessary for Rc; however, indicate for PT, and for. ote 2) eparate interfaces are required for modular unit. Refer to the attachment table on page 32 for standard port sizes when using with the

25 ttachments eries Pressure Relief 3 Port alve: () ith the use of a 3-port valve for residual pressure release, pressure left in the line can be easily exhausted. 3 I ymbol () 2 emi-standard: elect one each for a to b. emi-standard symbol: hen more than one specification is required, indicate in alphabetic order. xample) -3-RZ 3 (P) (R) 3-port valve for residual pressure release Thread type low direction ymbol ote) ote) R escription Rc PT 3/ low direction: Left to right low direction: Right to left ody size emistandard ame plate in imperial units: Pa b Pressure unit Z ote) ame plate in imperial units: psi ote) or thread type: PT only. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) pecifications ffective area (mm 2 ) ( ): v factor I, X a -6 3/ 3/. If a tube, stop valve or silencer is connected to the exhaust port of the /, the effective sectional area should be larger than the figure indicated in the following table, to prevent malfunction caused by back pressure. (This is not applicable to the /.) I (.) (.) 6 (.8) 3 (.68) 2 (.6) 38 (2.6) (2.98) (.3) 82 (.) 2 (6.8) ote) se an air filter on the I side for operating protection. aution on ounting X (.6) 6 (.8) (.) 29 (.) 36 (.9) (2.) 2 (2.28) 9 (2.66) (2.) (2.8) ffective area (mm 2 ) ross pacer: x.8,,,, Pipings are possible in all directions. I/ ports are not machined for threads. Please contact if threaded (machined) ports are required. ross spacer aution on ounting. hen mounting a cross interface directly on the I side of the lubricator, be sure to use the series check valve between the lubricator and cross interface. 2. actory mounting of a cross interface on the model is available as a special order : x Rc : ithout thread Y- Y2- Y2-2 Y3- Y3-2 Y- 2 Y- 3 Y- 3 Y I P ø X. 8 6 enter of.r.l. body x ø Lockable at the time of exhaust pplicable model 2, -6 ote ) in model numbers indicates a thread type. o indication is necessary for Rc; however, indicate for PT, and for. ote 2) If threaded I/ ports are required, they are available as a special order. Please contact R L 9

26 eries Piping dapter: x.8,,,,, 3/, piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. Piping adapter Pressure witch with Piping dapter I 3 enter of.r.l. body ote ) x.8 3/ 3/ 3/ pplicable model,,, R, L, R, L,,,, 2,, R, L,,,,, R, L,,, -6, -6, R -6, -6, L-6, -6, -6,, 6, 6,, 6,, 6, R R6, L, L6, 6 ote ) in model numbers indicates a thread type. o indication is necessary for Rc; however, indicate for PT, and for. ote 2) eparate interfaces are required for modular unit. actory mounting of a piping adapter on the models is available as a special order I ymbol ote) or thread type: PT only. This product is for overseas use only according to the new easurement Law. (The I unit type is provided for use in apan.) pecifications luid mbient and fluid temperature Proof pressure aximum operating pressure et pressure range (when O) ysteresis witch haracteristics ontact point configuration aximum contact point capacity Operating voltage:, aximum operating current 32 Thread type ccessory ymbol ote) ote) ymbol X2 P ote) X2-P ote) X2 X22 X2-P ote) X22-P ote) X X2 X-P ote) X2-P ote) X2 X2 X2-P ote) X2-P ote) Lead wire length. m. m. m. m. m. m. m. m 3 m 3 m 3 m 3 m 3 m 3 m 3 m 3 m Regulating pressure range. to. Pa. to. Pa. to. Pa. to. Pa. to.6 Pa. to.6 Pa. to.6 Pa. to.6 Pa. to. Pa. to. Pa. to. Pa. to. Pa. to.6 Pa. to.6 Pa. to.6 Pa. to.6 Pa ir to 6 (with no freezing). Pa. Pa. to. Pa.8 Pa or less a 2(), 2() or less 2 to 2, : m 8, : m, : m escription Rc PT 3/ Pressure display Pa Pa Pa/psi dual scale Pa/psi dual scale Pa Pa Pa/psi dual scale Pa/psi dual scale Pa Pa Pa/psi dual scale Pa/psi dual scale Pa Pa Pa/psi dual scale Pa/psi dual scale ounting position Right Left Right Left Right Left Right Left Right Left Right Left Right Left Right Left ote ) I- I- 2 I- 3 I- 2 I- 3 I- I- 2 I- 3 I- I- 6 3/ ody size Left Right Pressure switch with piping adapter 23 enter of.r.l. body pplicable model R,, 2, R2, R,, ote 2) R,, ote ) in the model numbers indicates a thread type. o indication is necessary for Rc; however, indicate for PT, and for. ote 2) annot be mounted on the -6 and -6. ote 3) eparate interfaces are required for modular unit. The pressure switch on the -6 and above and the -6 can be mounted by screwing I- into the piping adapter - 6-X or 6-6-X to 6- -X (with top-face thread Rc ). Products with a premounted switch are available as a special order. Please contact regarding their availability

27 eries pacers/rackets ccessories pacer enter of.r.l. body Y Y RL 2 X-X Y Y Y Y Y Y pplicable model,, 2, -6,, 6, 6,, 6 eal X (pacer width) Replacement Parts escription eal aterial Y R ote 2) Y YP-6 ote ) YP-6 Part no. Y Y YP-6 YP-6 Y YP-6 Y6 Y6P-6 ote ) ssembly of 2 O-rings ote 2) R is used for Y spacer because of no direct contact with fluid. pacer with racket ø YT YT YT YT YT Y6T YT Replacement Parts escription eal 6 6 YT aterial YT R ote 2) (YT, YT only) 2 33 YT YP-6 ote ) ote ) ssembly of 2 O-rings ote 2) R is used for YT spacer because of no direct contact with fluid. RL YP-6 ø (YT, YT only) YT YP-6 eal Part no. 2 X X enter of.r.l. body X-X (pacer width) pplicable model 2, -6,, 6,, 6,,, 6 YT YP-6 YT YP-6 Y6T Y6P-6 R L 9 32

28 3 2 ounting Position for pacer with racket T T T ttachment T T T T T ttachment T T T ttachment ttachment T T T ttachment ttachment : imensions from the end of the I side to the center of the mounting hole for the first bracket. 2: ounting hole pitch between the first and the second brackets. 3: ounting hole pitch between the second and the third brackets. : ounting hole pitch between the third and the fourth brackets. 3-port valve for residual pressure: heck valve: Pressure switch: T-interface: T I racket I racket P. 326 eries

29 P93-I Issued: ep 9 orporation of merica oulevard oblesville, I 66 P.. Information poxy oated.r.l.nits 2/3-***-*-X22 //-***-*-X R//-***-*-X8 L//-***-*-X //-***-*-X8 //-***-*-X Y//*-T pplication: eature : eature 2: ir preparation in an environment that requires enhanced corrosion protection. ie cast aluminum components are epoxy coated for improved chemical resistance. teel external hardware is replaced with stainless steel for improved chemical resistance. omparison with tandard Product: ) unctional performance is equivalent to standard product. 2) Product withstood salt spray testing per T - with excellent results (ee test results on page 2). Improved performance vs. other chemicals is anticipated but has not been verified. pplications: arine environments ater splash zone in various processes ashdown in food plants (non-food or splash zone only) Related Products: Q eries - 36 One-touch ittings - oming oon: Q2 Q2 eries - i plated brass One-touch ittings (oming oon) eries - 36 One-touch peed ontrols eries - repairable ylinder eries with X69 option - crimped body ylinder, domestic interchange eries - crimped body ylinder Y eries - luminum body ygienic esign ctuators

30 .R.L. nit eries 2~ ow To Order Y Z - X22 ir ombination nit ith xternal poxy oating, tainless asteners ody ize ymbol 2 3 ize ombination ymbol / ssembly Order R L L R Port ize ymbol 2 3 Port ize PT Threads pplicable ody ize 2 3 ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. pecifications ody size Operating specifications uto drain port (, ) owl type (, L, ) ody material owl material (, L, ) ody, owl surface treatment onnet (R, ) anual drain (, ) xternal screws Individual mounting brackets Panel mount nut (R, ) onnector brackets () ill plug (L) ight dome (L) ight glass hardware (,L,) owl ymbol 2 8 ame Plate, aution Plate On owl in psi, escription etal owl etal owl ith ight lass Residual Pressure Relief alve ymbol escription ithout alve ith ownstream alve ccessories ymbol Regulator andle Orientation ymbol escription ownward andle Y pward andle escription one loat uto rain (..) loat uto rain (.O.) pplicable ody ize 2 3, pplicable ombo ll ll pplicable ody ize ll 3, 3, 2 3 ame as standard - see catalog -2 or 6 PT PT PT / PT etal etal with sight gauge ie cast aluminum ie cast aluminum poxy resin coating Polyacetal PO tainless steel poxy coated steel PO ie cast zinc (epoxy coated) tainless steel Polycarbonate tainless steel imensions - Refer to drawings on page 3 * ** Q 2 33 mm 3. * ithout relief valve option ** ith relief valve option * 9 ** Q mm * ithout relief valve option ** ith relief valve option * 9 ** Q 2 33 mm 3. * ithout relief valve option ** ith relief valve option 2

31 eries 2~.R.L. nit (2) - P (Port ize) Q Q I P2 (auge Port ize) racket and Relief alve (Optional) in. learance or aintenance - owl etail (/) (2) - P (Port ize) Q Q I P2 (auge Port ize) racket and Relief alve (Optional) ote: ight glass not applicable to all size bowls. in. learance or aintenance - (2) - P (Port ize) Q Q I P2 (auge Port ize) racket and Relief alve (Optional) in. learance or aintenance otes: ilter & ilter Regulator owls depict manual drain, see individual sections for details with auto-drain options. 3

32 ilter eries ~ ow To Order 3 8 Z - X ody ize ymbol Port ize ymbol 2 3 ilter ize Port ize PT Threads pplicable ody ize ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. owl ymbol 2 8 ccessories ymbol * ith xternal poxy oating, tainless asteners ame Plate, aution Plate On owl in psi, escription etal owl etal owl ith ight lass escription one ounting racket loat uto rain (..) loat uto rain (.O.) pplicable ody ize, pplicable ody ize ll ll,, *ote: racket is not assembled and is supplied loose at time of shipment. pecifications ody size Operating specifications uto drain port owl type ody material owl material ody, owl surface treatment anual drain (, ) xternal screws Individual mounting brackets ight glass hardware ame as standard - see catalog -2 or 6 PT PT PT / PT etal etal with sight gauge ie cast aluminum ie cast aluminum poxy resin coating PO tainless steel poxy coated steel tainless steel imensions - Refer to drawings on page tandard Port ize PT PT PT imensions L P Q R T X. X. X.8 3. mm ounting racket it (Optional) P--X P--X P--X uto rain Port ize PT PT imensions L P Q R 6 T X. X.8 3. mm ounting racket it (Optional) P--X P--X

33 eries ~ ilter tandard (anual rain) P R T RT OTI TR Q owl etail () I L racket (Optional) ith uto rain R P T RT OTI TR Q I ote: ight glass not applicable to. L racket (Optional) PT

34 ilter - Regulator eries ~ ow To Order 3 8 Z - X8 ilter - Regulator ody ize ymbol Port ize ymbol 2 3 ize Port ize PT Threads pplicable ody ize ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. pecifications ody size Operating specifications uto drain port owl type ody material owl material ody, owl surface treatment onnet anual drain (, ) xternal screws Individual mounting brackets Panel mount nut ight glass hardware owl ymbol 2 8 ccessories ymbol * * ith xternal poxy oating, tainless asteners ame Plate, aution Plate On owl in psi, escription etal owl etal owl ith ight lass escription one ounting racket loat uto rain (..) loat uto rain (.O.) Panel ount ut pplicable ody ize, pplicable ody ize ll ll,, ll *ote: racket and/or panel mount nut are not assembled and are supplied loose at time of shipment. ame as standard - see catalog -2 or 6 PT PT PT / PT etal etal with sight gauge ie cast aluminum ie cast aluminum poxy resin coating Polyacetal PO tainless steel poxy coated steel PO tainless steel ccessories ounting racket it (Optional) P-2-X RP-2-X RP-2-X Panel ounting ut (Optional) RP-26 RP-26 RP-26 imensions - Refer to drawings on page tandard Port ize PT PT PT auge Port PT PT PT (max.3) 83(max.86) 88(max.92) 3.. (max.6) 28(max.22) 2(max.29) imensions L Q T X 28 X 38 X. 2 X. Y 3. Z mm uto rain Port ize PT PT auge Port PT PT (max.86) 88(max.92) (max.22) 2(max.2) imensions L Q T X 38 X. 2 X. Y 3. Z 9 2 mm

35 eries ~ ilter - Regulator tandard (anual rain) I PL ITTI T X Z L owl etail () racket and ounting ut (Optional) I Y Q ote: ight glass not applicable to. 2 - ith uto rain PL ITTI I Z T X L racket and ounting ut (Optional) I Y Q 2 -

36 Regulator eries R~ ow To Order R 2 Y Z - X8 ody ize ymbol Regulator ize PT Threads andle Orientation ymbol escription andle own Y andle p ith xternal poxy oating, tainless asteners ame Plate, aution Plate On owl in psi, ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. Port ize ymbol 2 3 imensions R R R Port ize Port ize PT PT PT pplicable ody ize auge Port PT PT PT pecifications ody size Operating specifications ody material ody, owl surface treatment onnet Individual mounting brackets Panel mount nut (max.9) 3(max.6) 2(max.28) L 6 66 ccessories ymbol * * escription one ounting racket Panel ount ut ame as standard - see catalog -2 or 6 PT PT PT ie cast aluminum poxy resin coating Polyacetal poxy coated steel PO imensions P Q T *ote: racket and/or panel mount nut are not assembled and are supplied loose at time of shipment. 28 X 38 X. 2 X. X 6 Y 9 2 Z mm 2 3. ccessories R R R ounting racket it (Optional) RP-2-X8 RP-2-X8 RP-2-X8 Panel ounting ut (Optional) RP-26 RP-26 RP I Q P T PL ITTI racket and ounting ut (Optional) I X Y Z Plate Thickness R, : ax 3. R: ax 8

37 8 2 eries L~ Lubricator ody ize ymbol Lubricator Port ize ymbol 2 3 imensions Port ize L PT L PT L PT ize Port ize ow To Order L 2 2 Z - X PT Threads pplicable ody ize pecifications ody size Operating specifications owl type ody material owl material ody, owl surface treatment Individual mounting brackets ill plug ight dome ight glass hardware owl ymbol 2 8 ccessories ymbol * ame Plate, aution Plate On owl in psi, escription etal owl etal owl ith ight lass escription one ounting racket ith xternal poxy oating, tainless asteners pplicable ody ize, pplicable ody ize ll ll *ote: racket is not assembled and is supplied loose at time of shipment. ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. ame as standard - see catalog -2 or 6 PT PT PT etal ie cast zinc etal with sight gauge ie cast aluminum ie cast aluminum poxy resin coating poxy coated steel tainless steel Polycarbonate tainless steel imensions L P Q R T X. X. X.8 3. mm ounting racket it (Optional) P--X P--X P--X R P T RT OTI TR Q I L racket (Optional) ight glass assy not applicable to L 9

38 ccessories Residual Pressure Relief 3 Port alve () ith the use of a 3 port valve for residual pressure release, pressure left in the line can be easily exhausted. Ø 2-Ø I ymbol () 2 Lockable at the time of exhaust 3 (P) (R) Port ize I, X ffective area mm 2 (v) I to to X (.) 6 (.8) 3 (.68) 29 (.) (2.98) 2 (2.28) Paint color (tandard) andle: Red ody: Platinum silver se an air filter on the I side for operating protection. I ow To Order Residual Pressure Relief 3 Port alve ody ize ymbol 2 Z - X ody ize pplicable 2 3 ymbol Port ize 2 3 Thread Type PT ody ize ote: Other sizes, thread forms, options, etc. may be possible, please contact for availability. ith xternal poxy oating, tainless asteners ame Plate In Imperial nits (PI, ) imensions 9 8 X I aution If a stop valve or a silencer is connected to the exhaust port of /, the effective sectional area should be larger than the figure indicated in the following table, to prevent malfunction caused by back pressure. (This is not applicable to ) ffective area (mm 2 ) If unit is to be used in a washdown application, avoid directing fluid into the exhaust port. mm 63

39 ccessories pacer poxy oated luminum, tainless crews, R eals.r.l. center imensions mm Y-T Y-T Y-T Interface ith T racket poxy oated luminum, tainless crews, R eals Interface with T-type bracket T-type bracket.r.l. ody center R L imensions Interface ith T racket YT-T YT-T YT-T R L pplicable s *-X22 3*-X22 *-X22 mm Other vailable ir Line Products with poxy oating/tainless ardware eries () R-6 L - * Y* Y* escription oft tart alve ater Removal ilter Regulator with tainless T-handle, aluminum bonnet for resistance oft tart alve with Pilot Lock-Out ilter-regulator with tainless T-handle, aluminum bonnet for resistance Piping dapter T Interface ross Interface Option ode X X229 X X X X X T3 Please contact for ordering information

40 alt pray Test Results (for reference). Test onditions ) ethod: In compliance with T -a (I Z 23), leave parts in a salt spray test chamber, and compare rust generation. 2) onditions: Temperature: 9 ( ) alt ater oncentration: % 3) Time: hours [requency: hr, 2hrs, 8hrs, 2hrs, 96hrs, 68hrs, 2hrs, hrs, hrs, hrs] ) amples: Parts for and (ee igure.) Part descriptions: parts () ody (2) rain cock (3) mall screw for level gauge () onnet screw Types: 2 Types ) tandard ) pecial X (oated with epoxy resin [xternal metal parts are made of ]) Refer to Table for part materials and treatments. *Quantity; 2 pieces for each 2. Test Results Table alt spray resistance test results o. escription Type aterial & Treatment Results 2 ody rain cock tandard aterial: ie ast luminum Treatment: Platinum oating aterial: ie ast luminum pecial X Treatment: Platinum & poxy oating aterial: ie ast luminum tandard Treatment: Zinc hromate pecial X aterial: Rusted in hrs Part of coating swelled ot rusted in hrs Part of coating swelled Rusted in 2hrs ot rusted in hrs 3 ross recessed round head screw for metal bowl with level gauge tandard pecial X aterial: teel Treatment: ickel Plating aterial: Rusted in 2hrs ot rusted in hrs 3 elf-tapping screw for R and bonnet tandard pecial X aterial: teel Treatment: Zinc hromate aterial: Rusted in 2hrs ot rusted in hrs 2 igure ody crew tandard X poxy Resin oating tandard X tainless teel tandard rain ock X tainless teel aution! To ensure the safest possible operation of this product, please be sure to read thoroughly the afety Instructions in our est Pneumatics catalog before use. 9 orporation ll Rights Reserved 2