Environmental Equipment, Inc. IMR 5000 Continuous Flue Gas Monitoring System IMR 5000

Transcription

1 IMR 5000 Continuous Flue Gas Monitoring System The IMR 5000 is state-of-the-art continuous flue-gas monitoring system, and is designed for a wide variety of flue-gas monitoring applications. The IMR 5000 is a stand-alone analyzer that works automatically. The rugged wall mounted enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 allows one or more gases (up to 12 gases) to be measure simultaneously. The IMR 5000 uses the latest sensor technology from electro-chemical sensors up to NDIR benches. The IMR 5000 can be build to customer specifications Analog 4 20mA or 0 20mA, RS232, Ethernet, RS485 are supported by the IMR 5000 APPLICATIO S Boiler / Burners Turbines Engines Incinerators Process Control Landfills Cogeneration plants Page 1 of 10

2 IMR 5000 Configuration Page 2 of 10

3 (1) Gas Probe / Flange / Stainless Steel Filter Probe length: 750mm (2) 1.5 meters heated hose between Gas Probe and IMR 400 (length can vary according to customer s specifications) (3) 115VAC/230VAC Pump (4) IMR 400 Including gas dryer inside IP or Nema Rating (5) Silicon Hose between IMR 400 and IMR 5000 (5 meters included) (6) IMR 5000(flue gas measuring unit) 1. Data Logger (SD5000) 2. Sensor(s) mA or 0 20mA Output 4. RS-232 Output (Optional) 5. RS-485 Output (Optional) 6. Communication through Ethernet 7. Circuit protection (2Amps) 8. IP64 or up to Nema 4X 9. Capable of working between temperatures of -10 and 50 C 10. Gas Temperature C 11. Display 12. Storage Media (SD card 1G) VAC/ 230VAC 60Hz/50Hz (7) 24VDC Pump (8) Flue Gas Control (Optional) (9) Temperature Probe ( C ) (Optional) Page 3 of 10

4 IMR 5000 I TER AL CO FIGURATIO MULITPLE STACK CO FIGURATIO Page 4 of 10

5 TECH ICAL DATA Function Process The Internal gas conditioning unit (peltier cooler or permeation dryer) dries and conditions the gas. The conditioned flue-gas is then analyzed by the individual sensors (NDIR or Electrochemical). Processing unit inside the IMR 5000 process this information and display it on its 5.7inch screen and relays the information to a monitoring computer provide by customer. Thanks to the software application installed in the monitoring unit, the customer is able to monitor this data. Gas Dryer Permeation Dryer Heated hose 1,5 meters (Thermostat set for 140 O C) Filter system, Stainless Steal housing Gas Probe 750 mm Flange 100 mm(4 ) Gas pump IP or Nema rating enclosures (Varies according to specifications) Analyzer Data Logger SDU5000 Sensor(s) 4 20mA or 0 20mA RS-232 Output (Optional) RS-485 Output (Optional) Communication through Ethernet Circuit protection (2Amps) Storage Media (SD card 1G) IP or Nema rating enclosures (Varies according to specifications) Capable of working between temperature of -10 and 50 o C Gas Temperature o C 115VAC / 230VAC 60Hz/50Hz Page 5 of 10

6 SDU5000 Aspects 6.4"Color TFT LCD with 640X480 pixels resolution The High Flexibility : 1. User configurable I / O 2. Expandable modular architecture 3. Flexible screen configuration User-Friendly: 1. Soft keys coupled with interactive dialog 2. Simplify setup & operation procedures 3. Easy - to - access function keys Various Display Formats: 1. Vertical trend, Horizontal trend Bar Graph, Numerical or mixed Fast sampling rate (200msec for all channels) Programmable alarm and messages Infrared detector that allows LCD to shut off automatically to prolong LCD life and power Graph and Bar Display Main Screen Display Page 6 of 10

7 GAS RA GES OPTIO S* CO (Carbon Monoxide) Range: 0 50,000ppm Resolution: 10ppm O 2 (Oxygen) Range: 0 21% Resolution: 0.1% SO 2 (Sulfur Dioxide) Range: ppm Resolution: 1ppm CH 4 (Methane) DIR Range: 0 100%LEL Resolution: 0.1% O ( itric Oxide) Range: 0 2,000ppm Resolution: 1ppm H 2 S (Hydrogen Sulfide) Range: 0 200ppm Resolution: 0.1ppm Temp (Optional) Range: o C / o F Resolution: 1 o C / 1 o F Particles System (Optional) Range: 0 999,999ppm Resolution: 1ppm O 2 ( itrogen Dioxide) Range: 0 2,000ppm Resolution: 1ppm HCl (Hydrogen Chloride) Range: 0 100ppm Resolution: 0.1ppm HF (Hydrogen Fluoride) Range: 0 100ppm Resolution: 0.1ppm H3 (Ammonia) Range: 0 100ppm Resolution: 0.1ppm HC (Hydro Carbon) Range: 0 100% LEL Resolution: 0.1 % CL 2 (Chlorine) Range: 0 100ppm Resolution: 0.1ppm O3 (Ozone) Range: Resolution: 0 100ppm 0.1ppm 2 O ( itrogen Oxide) Range: 0 1,000ppm Resolution: 1ppm ACURACY Measurement Range: = 100% 0 20% = +/-5% of measure % = +/-1% of measure range CALCULATE PARAMETERS (Optional) CO2 (Carbon Dioxide) Range: 0 25% (CO2 can also be measure upon request) Efficiency (ETA) Range: 0 100% Excess Air (Lambda) Range: 0 100% Losses (QA) Range: 0 100% *Other gases and ranges upon request Page 7 of 10

8 MULITPLE STACK CO FIGURATIO (2 to 4 Stacks) Page 8 of 10

9 MULTIPLE STACKS I TER AL CO FIGURATIO (2 to 4 Stacks) Gases and stack configuration will depend on customer s requiremnts Page 9 of 10

10 OBSERVER II (Optional) Every IMR 5000 is shipped with a copy of OBSERVER I, which has the basic function for calibration and configuration of IMR 5000 Instrument. OBSERVER II includes the same functions as OBSERVER I, however OBSERVER II allows the real time monitoring/observation, calibration and configuration of IMR 5000 unit. OBSERVER II is availabe upon request. LTIPLE STACKS I TER AL CO FIGURATIO (2 to 4 Stacks) MULTIPLE STACKS I TER AL CO FIGURATIO (2 to 4 Stacks) IMR 3634 Central Ave. St. Petersburg, Fl Phone: RING-IMR infor@imrusa.com Website: Page 10 of 10