Robuste High Speed Stiftleisten

Transcription

1 D-212 ERM S DV DS L TR ERM S DV TR (0,80 mm).0315" Serie ERM8 Technische Daten: Für eine vollständige Übersicht der technischen Daten siehe Kontaktträger: LP, schwarz Kontaktmaterial: Phosphor Bronze Oberfläche: Au oder Sn über 50µ" (1,27 µm) Ni Nennstrom: 95 (6 nebeneinanderliegende Powerkontakte) Betriebstemperatur: -55 bis +125 Nennspannung: 200 VA max RoHS Konform: Ja Verarbeitung: Bleifrei Lötbar: Ja SMD-Koplanarität: (0,10 mm).004" max ( ) (0,12 mm).005" max ( ) (0,15 mm).006" max ( ) Passende Steckverbinder: ERF8 Passende Kabelkonfektionen: ERD, ERDP ERM8 Anzahl Kontakte pro Reihe ERM L DV TR Robuste High Speed Stiftleisten EXTENDED LIFE PRODUT 10 year Mixed Flowing Gas mit 30µ" Gold Fragen Sie uns nach den maximalen Steckzyklen mit ERF8 ERM8/ERF8 7 mm Stapelhöhe TM Hot Swap option Robuste Edge Rate Kontakte für reduziertes Übersprechen von Signalen Übertragung bei 3dB Eingangsdämpfung mit PB Beeinfl ussung* ohne PB Beeinfl ussung** Single-Ended Signal Routing 10.5 GHz / 21 Gbps 10.5 GHz / 21 Gbps Differential Pair Signal Routing 9.5 GHz / 19 Gbps 11 GHz / 22 Gbps *Leistungsdaten beinhalten Beeinflussung durch nicht optimierte PB-Leiterbahnen. **Testplatinendaten sind ausgelagert aus den Leistungsdaten. Für eine vollständige Übersicht der technischen Daten siehe oder kontaktieren uns unter [email protected] Leiterform 7 mm bis 16 mm Platinenabstand Erweiterte Führungspfosten (-EGP) -Option für Blind-Mate und Docking- Anwendungen erhältlich Kontaktmaterial DV Entworfen für robuste Micro-Applikationen (1,50 mm).059" NOMINAL WIPE Stapelhöhe* ERM8 ERF8 Leiterform Leiterform (7,00) (9,00) (10,00) (12,00) (13,00) (15,00) (14,00) (16,00) *Verarbeitungsprozess kann Höhe im gesteckten Zustand beeinflussen Optionen TR PI Express Download unter Bei Fragen zu den Protokollen kontaktieren Sie [email protected] Anwendungsbeispiel Standard Pos. Part NOs. Serien NEXUS5001.org 11 ASP ERM8-DV POWER.org 17 ASP ERM8-DV ARM/HSSTP 20 ASP ERM8-DV NEXUS5001.org 23 ASP ERM8-DV POWER.org 35 ASP ERM8-DV Anwendungshinweise Leiterform A B (1,61).063 (5,97) (4,61).181 (8,91) (7,61).300 (11,91) (8,61).339 (12,91) , - 010, - 013, - 020, - 025, - 030, - 040, - 049, - 050, - 060, - 070, (3,25).128 (1,10).043 -L Anzahl Kontakte x (0,80) (6,00).236 -L & -EGP = Anzahl Kontakte x (0,80) (9,00).354 -EGPS = Anzahl Kontakte x 01 (0,80) (10,00) (8,91).351 (0,80).0315 Ø (1,32).052 Auswahl der Leiterform nach der Tabelle (7,20).283 (5,70).224 -EGPS (5,60).220 (1,07) L = Kontaktbereich 10µ" (0,25 µm) Gold, Anschluss Matt Zinn - S = Kontaktbereich 30µ" (0,76 µm) Gold, Anschluss Matt Zinn -EGP (5,60).220 (10,80).425 (3,20).126 B A - DS = Differential Pair (Nur -05.0) (Nur -013, -025 Kontakte) (Hot swap) - L = Einrastvorrichtung (Nur -05.0) (nicht mit -EGP & -EGPS) - EGP = Erweiterter Führungspfosten (Nur -05.0) (nicht mit -L & -EGPS) - EGPS = Erweiterter Führungspfosten Schirmung (Nur -05.0) (nicht mit L & -EGP) (nur -010, -020, -025, -030) - K = Ø (4,00 mm).157" Polyimid Film Pick & Place Pad - TR = Tape & Reel Achtung: Einige Längen, Formen und Optionen sind keine Standardausführungen und können nicht zurückgenommen werden

2 *** DO NOT SALE FROM THIS PRINT POSITION #1 INDIATOR "A" (SEE TABLE 5) "B" (SEE TABLE 5) (TOL. NON-AUM) "" (SEE TABLE 5) ERM8-XXX-XX.X-DV-01 "A" "A" "" "N" (SEE TABLE 5) (SEE TABLE 8) 'R' DESIGNED AND DIMENSIONED IN MILLIMETERS [INHES] -A PIN VOID ORES (TYP) (TOL. NON-AUM) "D" (SEE TABLE 5) MAX SWAY No OF POSITIONS (PER ROW) -005, -010, -011, -013, -020, -025, -030, -035, -040, -049, -050, -060, -070, -075,-100 (-100 AVAILABLE ON LEAD STYLE ONLY) LEAD STYLE = 2mm = 5mm = 8mm = 9mm ***-15.0 = 15mm PLATING SPEIFIATION -L: 10µ" LIGHT SELETIVE GOLD IN ONTAT AREA, MATTE TIN ON TAIL -S: 30µ" SELETIVE GOLD IN ONTAT AREA, MATTE TIN ON TAIL ROW SPEIFIATION -DV: DOUBLE VERTIAL ** = NOT RELEASED FOR PRODUTION *** = NOT TOOLED T-1MXX-XX.X-X BOTTOM VIEW (ERM X-DV-XX SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) FIG 1 (ERM X-DV-XX SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) "E" "F" (SEE TABLE 6) SEE TABLE SETION "A"-"A" SALE 4 : 1 NOTES: 1. REPRESENTS A RITIAL DIMENSION. ORE SUPPORT FEATURE PRESENT IN LAST 5 POSITIONS ON EAH END UNLESS OTHERWISE SPEIFIED, DIMENSIONS ARE IN MILLIMETERS [INHES]. TOLERANES ARE: DEIMALS ANGLES X.X: 0.3 [.01] 2 X.XX: 0.13 [.005] X.XXX: [.0020] MATERIAL: DO NOT SALE DRAWING INSULATOR: LP, OLOR: BLAK TERMINAL: PHOS BRONZE LATH: Beu SHIELD: PHOS BRONZE F:\DWG\MIS\MKTG\-MKT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. SHEET SALE: 2:1 TAPE & REEL (STANDARD PAKAGING) (SEE NOTES 4 & 7) OPTIONS -K: POLYIMIDE FILM PAD (FOR -EGP & EGPS OPTIONS USE K-DOT ) (FOR ALL OTHER OPTIONS USE K ) -DS: DIFFERENTIAL PAIR (HOT SWAP) (AVAILABLE ONLY ON LEAD STYLE) (SEE TABLE 4 FOR POSITION AVAILABILITY) -L : LATHES (AVAILABLE ONLY ON -05.0, -08.0, & ***-15.0 LEAD STYLES. -L ON & NOT TOOLED) (SEE TABLE FOR AVAILABILITY) (NOT AVAILABLE WITH -EGP, -L2, -W, -EGP, -EGPS OPTIONS *** -L2: LATHES WITH LONG WELD TAB (AVAILABLE ONLY ON -05.0, &.09.0 LEAD STYLES)(NOT AVAILABLE WITH -L, -E, -W, -EGP AND -EGPS OPTIONS) *** -E: EXTENDED GUIDE POSTS, WITH LONG WELD TAB (AVAILABLE ONLY ON -05.0, &.09.0 LEAD STYLES, NOT AVAILABLE WITH -L OPTION, SEE NOTE 6) *** -W: WELD TAB (AVAILABLE ONLY ON -05.0, &.09.0 LEAD STYLES) -EGP: EXTENDED GUIDE POSTS (AVAILABLE ONLY ON LEAD STYLE) (NOT AVAILABLE WITH -L OPTION) -EGPS: EXTENDED GUIDE POST SHIELD (AVAILABLE ONLY ON LEAD STYLE) (NOT AVAILABLE WITH -L OPTION) (-10, -20, -25, & -30 POSITIONS ONLY) DESRIPTION: DETAIL 'R' SALE 4 : BURR ALLOWANE: 0.038[.0015] MAX. 3. MINIMUM PUSHOUT FORE: TERMINAL 2.22 N [.5 LB.], WELD TAB 4.45 N [1 LB.] 4. FOR QUANTITY UP TO 49 PIEES, NO LEADER, TRAILER, OR EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITY OF PIEES, NO LEADER OR TRAILER WILL BE SUPPLIED. 5. "F" DIMENSION DOES NOT APPLY TO -EGP & -EGPS OPTION, SEE FIG. 5 & NOTE DELETED. 7. -TR PAKAGING NOT AVAILABLE ON THE 100 POSITION. [email protected] code BY: KNOWLDEN 9/27/2005 SHEET 1 OF 6

3 "H" 0.50[.020] "A" (SEE SHT 1, TABLE 5) "G" (SEE SHT 1, TABLE 6) "M" 0.50[.020] (SEE TABLE 7) 0.11± ± FIG 2 -K OPTION (FOR -EGP, -E OR -ES OPTIONS USE K-DOT ) (USE K FOR ALL OTHER OPTIONS) (ERM8-030-XX.X-X-DV-K SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) FIG 4 -K WITH -L, -L2 OR -W OPTIONS (ERM X-DV-K-L SHOWN) (SAME AS FIG 2, EXEPT AS SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) (SIGNAL PINS) SETION "N"-"N" (GROUND PINS) T-1M48-XX.X-X SETION "P"-"P" SIGNAL[SHORT PIN] GROUND[LONG PIN] "K" (SEE TABLE 7) "P" "N" "N" "P" "L" (SEE TABLE 7) "J" (SEE TABLE 7) SIGNAL[SHORT PIN] GROUND[LONG PIN] WT-XX-XX-X ERM8-XXX-XX.X-DV-L 2 MAX SWAY (EITHER DIRETION) FIG 3 -DS WITH -L OR -L2 OPTIONS (-DS AVAILABLE ON LEADSTYLE ONLY) (-L AVAILABLE ON -05.0, -08.0, & ***-15.0 LEAD STYLES ONLY. -L ON & NOT TOOLED) (ERM X-DV-DS-L SHOWN) (SAME AS FIG 1, EXEPT AS SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) "S" "T" 3 MAX SWAY T-1M37-XX.X-X IN PROESS VIEW F:\DWG\MIS\MKTG\-MKT.SLDDRW *** *** *** *** THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. DO NOT SALE DRAWING SHEET SALE: 2:1 DESRIPTION: [email protected] code BY: KNOWLDEN 9/27/2005 SHEET 2 OF 6

4 "J" (SEE SHT 2, TABLE 7) ERM8-XXX-05.0-DV-EGP WT-XX-XX-X "L" (SEE SHT 2, TABLE 7) 2 MAX SWAY (EITHER DIRETION) "S" (SEE SHT 2, TABLE 3) "T" (SEE SHT 2, TABLE 3) FIG 5 -EGP AND -E OPTIONS (AVAILABLE ON LEAD STYLE ONLY) (ERM X-DV-EGP SHOWN) (SAME AS FIG 3, EXEPT AS SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) F:\DWG\MIS\MKTG\-MKT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. DO NOT SALE DRAWING SHEET SALE: 2:1 DESRIPTION: [email protected] code BY: KNOWLDEN 9/27/2005 SHEET 3 OF 6

5 "B" "B" "P" (SEE TABLE 9) ERM8-XXX-05.0-DV-EGPS SH29-XX-02-X "S" (SEE SHT 2, TABLE 3) (TYP) "R" (SEE TABLE 9) "Q" (SEE TABLE 9) "T" (SEE SHT 2, TABLE 3) (TYP) "L" (SEE SHT 2,TABLE 7) 2 MAX SWAY (EITHER DIRETION) FIG 6 -EGPS OPTIONS (AVAILABLE ON LEAD STYLE ONLY) (ERM X-DV-EGPS SHOWN) (SAME AS FIG 5, EXEPT AS SHOWN) SETION "B"-"B" F:\DWG\MIS\MKTG\-MKT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. DO NOT SALE DRAWING SHEET SALE: 3:1 DESRIPTION: BY: [email protected] code KNOWLDEN9/27/2005 SHEET 4 OF 6

6 "B" (SEE SHT 2, TABLE 5) "T" "S" ERM8-XXX-05.0-DV-S T-1M X ERM8H-XXX-10.0-DV "E" (SEE SHT 1, TABLE 6) "F" (SEE SHT 1, TABLE 6) WT X (2 PLS) SEE TABLE 1 "D" (SEE SHT 2, TABLE 5) "S" "T" SETION "T"-"T" "J" (SEE SHT 2, TABLE 7) SETION "S"-"S" FIG 7 (***ERM X-DV SHOWN) (SOME ENTER FEATURES REMOVED FOR LARITY) ***NOT TOOLED "K" (SEE SHT 2, TABLE 7) "U" WT X (2 PLS) (TYP) "L" (SEE SHT 2, TABLE 7) "U" 2 MAX SWAY (EITHER DIRETION) FIG 8 (***ERM X-DV-L SHOWN) (SAME AS FIG. 7, EXEPT AS SHOWN) ***NOT TOOLED SETION "U"-"U" F:\DWG\MIS\MKTG\-MKT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. DO NOT SALE DRAWING SHEET SALE: 2:1 DESRIPTION: [email protected] code BY: KNOWLDEN 9/27/2005 SHEET 5 OF 6

7 (-02.0 SHOWN) (-05.0 SHOWN) (-08.0 SHOWN) (-09.0 SHOWN) (-05.0 WITH -EGPS OPTION SHOWN) (***-15.0 WITH -L OPTION SHOWN) F:\DWG\MIS\MKTG\-MKT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. DO NOT SALE DRAWING SHEET SALE: 2:1 DESRIPTION: BY: code KNOWLDEN 9/27/2005 SHEET 6 OF 6

8 REVISION G REOMMENDED PB LAYOUT FOR ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT DESIGNED & DIMENSIONED IN MILLIMETERS[INHES] NOTES: 1. ONNETOR ENVELOPE DIMENSIONS. OTHER OMPONENTS PLAED ON PB SHALL AVOID THIS ZONE. "" "B" "A" ONNETOR OUTLINE ONNETOR OUTLINE (-L AND -EGP OPTIONS ONLY) (TYP) (TOL. NON-AUM) PIN 1 PIN 59 'A' (TYP) (-L AND -EGP OPTIONS ONLY) (TYP) G (2 PLS) PIN 2 PIN (TYP) ± ±.003 PTH (2 PLS) (-L AND -EGP OPTIONS ONLY) TO BE SOLDERED USING PASTE-IN-HOLE TEHNOLOGY 1.45± ±.003 NPTH (2 PLS) (TYP) FIG. 1 ALL OPTIONS EXEPT - EGPS (-030 POSITION SHOWN) (ALL DIMENSIONS ARE SYMMETRI ABOUT THE ENTERLINE) ONNETOR OUTLINE DETAIL 'A' SALE 6 : 1 F:\DWG\MIS\Mktg\Footprnt\ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. [email protected] code: SHEET 1 OF 4

9 REVISION G REOMMENDED STENIL LAYOUT FOR ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT NOTE: STENIL TO BE 0.15[.006] THIK. DESIGNED & DIMENSIONED IN MILLIMETERS[INHES] "" "A" PIN (TYP) (TOL. NON-AUM) PIN (2 PLS) (-L AND -EGP OPTION ONLY) PIN (TYP) PIN (TYP) FIG. 2 (-030 POSITION SHOWN) (ALL DIMENSIONS ARE SYMMETRI ABOUT THE ENTERLINE) F:\DWG\MIS\Mktg\Footprnt\ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. [email protected] code: SHEET 2 OF 4

10 REVISION G REOMMENDED PB LAYOUT FOR ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT "D" "E" "" "B" PIN 1 PIN (SEE NOTE 1) PIN 2 PIN 60 ONNETOR OUTLINE (-EGPS OPTION) (SEE NOTE 1) G 0.83± ±.003 PTH (6 PLS) (-EGPS OPTION ONLY) TO BE SOLDERED USING PASTE-IN-HOLE TEHNOLOGY 1.45± ±.003 NPTH (2 PLS) FIG. 3 -EGPS OPTION (-030 POSITION SHOWN) (SAME AS FIG.1, EXEPT AS SHOWN) (ALL DIMENSIONS ARE SYMMETRI ABOUT THE ENTERLINE) F:\DWG\MIS\Mktg\Footprnt\ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. [email protected] code: SHEET 3 OF 4

11 REVISION G REOMMENDED STENIL LAYOUT FOR ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT NOTE: STENIL TO BE 0.15[.006] THIK. "E" "" PIN 1 PIN (6 PLS) (-EGPS OPTION ONLY) PIN 2 PIN 60 FIG. 4 -EGPS OPTION (-030 POSITION SHOWN) (SAME AS FIG.2, EXEPT AS SHOWN) (ALL DIMENSIONS ARE SYMMETRI ABOUT THE ENTERLINE) F:\DWG\MIS\Mktg\Footprnt\ERM8-XXX-XX.X-DV-XXXX-FOOTPRINT.SLDDRW THIS DOUMENT ONTAINS INFORMATION ONFIDENTIAL AND PROPRIETARY TO SAMTE, IN. AND SHALL NOT BE REPRODUED OR TRANSFERRED TO OTHER DOUMENTS OR DISLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHIH IT WAS ONSENT OF SAMTE, IN. [email protected] code: SHEET 4 OF 4