April International opportunities and events for students and graduates
|
|
|
- Clifford Wiggins
- 8 years ago
- Views:
Transcription
1 April 2013 International opportunities and events for students and graduates 1
2 Airbus News Letter April 13 Current open positions for students and graduates This is the new edition of the Airbus Newsletter focusing on career opportunities in Airbus. Information about open graduate positions and early career entry programmes can be found on our career website at Most roles can be accessed by clicking the Apply Now button except where stated otherwise. The positions listed for Airbus will be visible on the system as long as they are available. Once a position has been filled the reference and job description will disappear, so we encourage you to be proactive in applying. Graduate Roles Reference Title Start Date Location Technicien essais Toulouse Maintenance and Engineering Consulting Services ASAP Blagnac Manager Maintenance and Engineering Consulting Services ASAP Blagnac Manager SESAR Programme WP11.1 Flight Operations Specialist ASAP Blagnac A400M Finance Controller Getafe Process engineer for composite parts for boxes IIIescas Lean Improvement Getafe Spares Saupport Getafe Industrial Support and monitering project officer Getafe A380 fuselage design ETT Getafe ETT-Admin support & planning & reporting Getafe CAE/HPC engineer Getafe Analysis cabin & Cargo hold engineer Getafe Cabin & Cargo hold engineer- mechanical design Getafe Cabin & Cargo hold engineer- mechanical design Getafe Analysis cabin & Cargo hold engineer Getafe Standards Parts Procurement officer Getafe AFMIS Tool- Facility Management Getafe MRO Production Control A400M Seville Field Representatives Barajas VOLUNTEER INTERNATIONAL EXPERIENCE VIE Reference Title Start Date Location Fuel Systems R&T Project Manager Filton Fuel Systems R&T Engineer Filton Supply Chain and Project Management Officer Filton VIE - PPM Fwd/Rear -900 Syst.Test FTI Germany Hamburg VIE - Assistant to HO Cabin A Hamburg 2
3 FINAL YEAR THESIS 2013 Reference Title Start Date Location Single Aisle Neo windmilling stress engineer Toulouse PhD "Development of smart tightening control of assemblies" WORKING STUDENT Toulouse Reference Title Start Date Location Werkstudent (m/w) im Bereich Facility Management: Mobile ASAP Stade Instandhaltung Werkstudent (m/w) im Bereich Produktion: Team Assistenz ASAP Hamburg Werkstudent (m/w) im Bereich Facility Management: ASAP Bremen Energiemanagement Werkstudent (m/w) bei EADS Learning Services: ASAP Hamburg Unterstützung Projekte/Reporting Werkstudent (m/w) im Bereich Personal: HR Business ASAP Hamburg Partner A350 Manufacturing Werkstudent (m/w) im Bereich Personal: ASAP Hamburg Gesundheitsmanagement Werkstudent (m/w) im Bereich Engineering: Plant Engineering Support ASAP Bremen INTERNSHIPS Reference Title Start date Location Assistant new editor and event organiser Toulouse Optimisation de la lubrification en perçage UPA et support Nantes à la production ICT Communication intern Toulouse Amélioration des processus de fabrication ou process Nantes capability Amélioration des processus de fabrication process Nantes capability Amélioration des processus de fabrication process Nantes capability Préparation de surface & peinture Nantes Change and transformation assistant Toulouse Trainee for Aircraft Electrical System Application Tool Toulouse Development Thermal integration Toulouse Ergonomie Toulouse Gap Year Internship - Investor Marketing Toulouse Césure communication Toulouse Summer semester Toulouse Feasibility study of a graphical post-treatment tool Toulouse Develop A350 Business Process Mgt CM innovation Toulouse Change Management Toulouse Internship within the Finance Academy - HR Support to Toulouse Competence Management IT Internship - Social Network Framework Toulouse ID Lab VR sessions management internship Toulouse
4 Airbus News Letter April Communication for Airbus Systems Faculty Toulouse Air Business Academy - Communication Internship Toulouse Stage gestion de projet Toulouse Amélioration des outils d'analyse de mesures de briut Toulouse d'avion en vol Air Business Academy - Cartoonist Internship Toulouse Aero Data for future projects Toulouse Lofting MGY analysis process Toulouse Engine analysis for the future aircraft product Toulouse Requirements to define speech synthesis in cockpit Toulouse Gap Year - International Human Resources Generalist for Toulouse Engineering Methodology improvement of A/C perfo analyses for Toulouse system failures Césure RH - Mobilité Internationale Toulouse Gap Year - Expatriate Management Toulouse Gap Year - Costing Support to Procurement Toulouse Gap Year in Business Controlling Toulouse Develop the communication blueprint in logistic & transport Toulouse operations Couplage statique fluide structure appliqué aux Toulouse configurations hypersustentées A350 engineering management Toulouse IT developments & Task Toulouse Support R&T RFID For Electronics equipement Toulouse Ingénieur Méthodes secteur CN et APTL composites Nantes Competences and Resources Management Internship Toulouse Secrétariat PB Toulouse LR NCF Finite element analysis for fatigue and damage Toulouse tolerance Internship - Impact of European Emissions Trading Scheme Toulouse on Airlines Google Earth flight path computation for incident/accident Toulouse an Finance Internship - Airbus Subsidiaries Toulouse Stagiaire optimisation poste de travail production Saint Nazaire Stagiaire organisation flux production Saint Nazaire Conformance Management A Toulouse A380 Programme Procurement Support Toulouse Graphical documentation value for new maintenance Toulouse concept Performance management support Toulouse Aircraft management support Toulouse Industrial strategy for rapid manufacturing shops Toulouse Airline profitability analysis and related modelization Toulouse Aircraft model generation improvement Toulouse Spécialiste méthode logistique production Toulouse Optimisation of automatic test means Toulouse Test Automation Toulouse Airframe Maintenance analyst Toulouse Project Leader Toulouse Internship A350 Operations ASAP Illescas 4
5 Internship KPI Reporting ASAP Madrid Internship Business Support ASAP Illescas Internship Getafe Business Controller ASAP Getafe Internship SAFETY Department ASAP Getafe Internship Manufacturing Cost Estimator ASAP Getafe Internship in Support in SAP ASAP Getafe Internship in Aerodynamic Tools & Simulation ASAP Getafe Ïnternship in face Technology ASAP Getafe Internship in Structural Dynamic Analysis ASAP Getafe Internship : to Support HR Performance & Improvement ASAP Barajas Internship Maintenance Repair and Overall Network MRTT ASAP Getafe Internship Horizontal Tail Plane Assembly Process & CapEx ASAP Getafe Controlling Internship Human Resources Business Partner Barajas ASAP Barajas Internship Programmes ASAP Getafe Internship Industrial Property ASAP Getafe Internship face Technology - Materials & Processes ASAP Getafe Internship Barajas Procurement ASAP Madrid Internship Quality Support and Improvement ASAP Getafe Internship Operation Documentation M&L ASAP Madrid INTERNSHIP QUALITY SUPPORT ASAP Getafe Internship Gestión de Programa Long Range ASAP Getafe Internship in Research & Technology Management ASAP Getafe Internship Fuselage and Tails Aerodynamics ASAP Getafe Internship MRTT Campaigns ASAP Getafe Internship - IT Services ASAP Getafe Internship Soporte Finanzas ASAP Illescas Internship A320 Implantacion Lean ASAP Getafe Internship Distribute Products ASAP Getafe Internship Engineering Rear fuselage Architect A350XWB ASAP Getafe Internship Aircraft Contracts ASAP Barajas Internship AFMIS (Facility Management) ASAP Getafe Internship MSTID Training and Aircrew Operations ASAP Getafe Internship Supply & Demand, Methods and Tools ASAP Getafe Internship - Estudios de transitorios neumáticos ASAP Getafe Internship - IT Services ASAP Getafe Internship Recruitment Department ASAP Getafe Internship Service Bulletin - Product Support ASAP Getafe Internship Lean Management ASAP Madrid Internship - Human Resources Generalist (HRBP) ASAP Getafe Internship Materials Procurement ASAP Getafe Internship Learning ASAP Madrid Intership Procurement SC&Quality Standard Parts ASAP Getafe Internship Technology Integrator Engineer ASAP Getafe INTERNSHIP DERIVATES ENGINEER ASAP Getafe Internship - Supporto to A400M Loadmasters Training Courses Internship Support to A400M Ground Crew Training courses-sevilla INTERNSHIP QUALITY ENGINEERING L&M Internship Ingeniería Fab. Eléctrica Internship Soporte producción hangar mantenimiento de aviones y Linea de Vuelo 5
6 Airbus News Letter April Becario para Manuel Freire ASAP Puerto Real INTERNSHIP LEAN MANUFACTURING ASAP Cbc Internship Maintenance Repair and Overall Network Internship - MBA Final Assembly Line A400M Aircraft Management Internship Industrial Services FAL A400M Internship Industrial Services FAL A400M INTERNSHIP Soporte en la Gestion de Aduana ASAP Tablada INTERNSHIP LEAN MANUFACTURING ASAP Cbc Internship Support Category Internal events Internship Suministro Despachos ASAP Tablada Internship: Horizontal Tail Plane Assembly Process & ASAP Puerto Real CapEx Controlling Internship Controlling Tablada ASAP Tablada Internship Industrial Support ASAP Puerto Real Internship Automatic cells ASAP Puerto Real Internship Service Bulletins Internship Ingenieria de Fabricacion Electrica ASAP Sevilla INTERNSHIP HUMAN RESOURCES SUPPORT CBC ASAP Cbc Internship Support to A400M Loadmasters Training Courses Internship Documentation Internship Optimización y Documentación de los procesos de Aprovisionamiento Internship FTC Sevilla Technical Group Internship FTC Sevilla Technical Group Internship Quality Department in Electrical Workshop Internship Quality Tecnichal Documentation ASAP Puerto Real INTERNSHIP A400M PROCESSES AND SYSTEMS DEVELOPMENT IN MATERIAL SUPPORT OPERATION Internship Calidad de sistemas INTERNSHIP Practicas Lean Manufacturing ASAP Cbc Internship Seguridad y Salud en el Trabajo ASAP Puerto Real Internship Quality Engineering Non Conformance Support Internship Quality Engineering Flight Line Support Internship Facility Management ASAP Puerto Real Programa Beca Proyecto Fin de Carrera ASAP Sevilla Programa Beca Proyecto Fin de Carrera Ingª Sistemas ASAP Sevilla Becario UCA ASAP Puerto Real Internship LEAN / SHAPE Improver Agent Facility Management & Real Estate Spain Intership PODR Dptº ASAP Puerto Real Internship SEGUIMIENTO DE RATIOS EN PROGRAMAS de ASAP Tablada AEROESTRUCTURA Internship Quality Engineering BECARIO CALIDAD DE INGENIERIA INTERNSHIP RECURSOS HUMANOS CBC ASAP Cbc Internship Quality Documentation INTERNSHIP QUALITY ENGINEERING ASAP Cbc Internship Supply Chain PODR Dptº ASAP Puerto Real 6
7 Internship Flight Test Center Seville Quality Becario Medio Ambiente Internship Ingeniería de Producción ASAP Puerto Real Internship Production Control ASAP Puerto Real Internship: Flight Test Analysis Engineer Prácticas máster CEU ASAP Tablada Internship EADS General Procurement ASAP Puerto Real Praktikum (m/w) im Bereich Manufacturing:A380/A400M ASAP Stade Seitenleitwerksmontage Praktikum im Bereich Engineering: A380 Customized Hamburg Praktikum im Bereich Engineering: Projektmanagement Hamburg Praktikum im Bereich Engineering Kabinenkonzept: Hamburg Gestaltung und Konstruktion ID2013: Praktikum im Bereich Logistik: Production Bremen Scheduling/Ordering Praktikum im Bereich Supply Chain: Airframe Supply Stade Management Praktikum im Bereich Operative Sicherheit: Werkschutz, ASAP Hamburg Security Internship within Business Performance & Improvement: Hamburg Supply Chain Management Praktikum im Bereich Manufacturing Engineering: Aufbau Hamburg Wissensmanagement Internship within Customs/Zoll: Support Activities, ASAP Hamburg Assistance Internship within Customer Service: Business Performance ASAP Hamburg & Improvement Praktikum im Bereich Weiterbildung: Einführung eines Hamburg Toolmanagements Praktikum im Bereich Provisioning IS Solution Hamburg Developement Praktikum im Bereich Unternehmenssicherheit: Operative Bremen Sicherheit Bremen Praktikum im Bereich Engineering: A 350 Vertical Tailplane Stade Lean Factory Internship within strategic Industrial Planning, Logistic and Hamburg Transport Praktikum im Bereich Personalwesen: Recruitmentcenter - ASAP Hamburg Young Talents Praktikum im Bereich Personalwesen: Berufsausbildung, Hamburg Paint Praktikum im Bereich Engineering: Fertigungsoptimierung Hamburg Praktikum im Personalbereich: Berufsausbildung Hamburg Internship within Project Management: A350 XWB (extra Hamburg Wide-Body) Praktikum im Bereich Engineerig: Tool- und Hamburg Datenbankentwicklung Praktikum im Bereich Engineering: Fertigungsplanung Hamburg Cabin A ID2013: Praktikum im Bereich Back Office Logistik: Final Hamburg Assembly Line China Praktikum im Bereich Personalwesen: Expatriate Hamburg Management Praktikum im Bereich Prozesse, Methoden & Investitionen in der FAL Hamburg 7
8 Airbus News Letter April ID2013: Praktikum im Bereich Systemanalyse und Bremen Migrationskonzepterstellung Praktikum im Bereich Performance Management FAL Hamburg China/USA Praktikum im Bereich Performance Management FAL Bremen China/USA Praktikum im Bereich Engineering: Innovation, CFK & Stade Produktionstechnik ID2013: Praktikum im Bereich Materialien und Prozesse: Bremen Handbucherstellung ID2013: Praktikum im Bereich Materialien & Prozesse: CFK Bremen Oberflächentechnik ID2013: Praktikum im Bereich Engineering: Hydraulics & In Bremen Service Optimierung Praktikum im Bereich Engineering: Toolentwicklung Hamburg A350XWB Mechanische Systeme Internship within Engineering: Digital Mock-Up and Data Hamburg Management ID2013: Praktikum im Bereich Produktion/Kunststoff Stade ID2013: Praktikum im Bereich Stade Produktion/Projektmanagement: Montage A350/SA/TA ID2013: Internship within Engineering: Plant Engineering Bremen Support ID2013: Internship (f/m) within Engineering: Flight Test Bremen Integration System ID2013: Internship (m/f) within Engineering: A400M Bremen Mechanical Systems Support Praktikum im Bereich CFK-Produktion: Assistenz der Stade Projektleitung Praktikum im Bereich Produktion Flügel A350/A330: Erstellung eines TPM Konzepts Bremen 8
9 EVENTS 24 th May: EADS Internship Day (Bremen) - Germany The Internship Day 2013 in Bremen offers you the chance to meet our EADS recruiters. Seize the opportunity and apply now to one of the thirty Internship Day positions available! The internship opportunities are gradually uploaded online and can be found under the keyword ID2013. You can already find some of them in this newsletter. These internships will be exclusively assigned on the Internship Day 2013 on May, 24th in Bremen where the interviews will also take place. Not only will you have the opportunity to prepare yourself for a specific position but you will also benefit from: Guidance on writing CVs and Application Letters Application workshops that provide useful hints and tips Insights into career paths and opportunities at EADS Active exchanges with EADS employees and current interns. Your application to join us must be submitted online before April, 14th We are looking forward to hearing from you! For more information please visit: Overview/nternship-day-bremen/what-to-expect.html 9
10 Airbus News Letter April th 11 th April: Aircraft Interiors Expo 2013 (Hamburg) - Germany Aircraft Interiors Expo is the world s largest event dedicated to the aircraft interiors industry. Airbus will of course be present, and you will have the opportunity to meet HR Representatives. The exhibition entry ticket is free. To register, please click here. For more information please visit: 17 th April: Valencia career fair (Valencia) Spain The Polytechnic University of Valencia is always faithful to its commitment to employment, organized the XIII edition of the Employment Forum - Meeting between companies and students, 17 and 18 April. 3 rd April: Induforum (ETSII MADRID) - Spain Induforum 2013 employment Fair is the Technical School of Industrial Engineering of the Polytechnic University of Madrid that will take place on Wednesday 3 and Thursday 4 April 2013 at midday from 9:00 to 18:00 h. The fair aims to provide a meeting point between companies and direct students of the School. For more information please visit: 30th April: Bonding Firmenkontaktmesse (Dresden) Germany Meet us at the EADS stand at the Bonding Career Fair in Dresden! For more information please visit: FOLLOW US ONLINE 10
March 2013. International opportunities and events for students and graduates
March 2013 International opportunities and events for students and graduates 1 Airbus News Letter March 13 Current open positions for students and graduates This is the new edition of the Airbus Newsletter
February 2013. International opportunities and events for students and graduates
February 2013 International opportunities and events for students and graduates Current open positions for students and graduates This is the new edition of the Airbus Newsletter focusing on career opportunities
July 2013. International opportunities and events for students and graduates
July 2013 International opportunities and events for students and graduates 1 Airbus News Letter July 13 Current open positions for students and graduates This is the 14th edition of the Airbus Newsletter
May 2013. International opportunities and events for students and graduates
May 2013 International opportunities and events for students and graduates 1 Newsletter May 13 CURRENT OPEN POSITIONS FOR STUDENTS AND GRADUATES This is the new edition of the Newsletter focusing on career
August 2013. International opportunities and events for students and graduates
August 2013 International opportunities and events for students and graduates 1 Airbus Newsletter August 13 Current open positions for students and graduates This is the new edition of the Airbus Newsletter
November 2012. International opportunities and events for students and graduates
November 2012 International opportunities and events for students and graduates Current open positions for students and graduates This is the 9 th edition of the Airbus Newsletter focusing on career opportunities
September 2012. International opportunities and events for students and graduates
September 2012 International opportunities and events for students and graduates Current open positions for students and graduates This is the 10th edition of the Newsletter focusing on career opportunities
October 2012. International opportunities and events for students and graduates
October 2012 International opportunities and events for students and graduates Current open positions for students and graduates This is the 11 th edition of the Airbus Newsletter focusing on career opportunities
October 2012. International opportunities and events for students and graduates
October 2012 International opportunities and events for students and graduates Current open positions for students and graduates This is the 11 th edition of the Airbus Newsletter focusing on career opportunities
Airbus PLM A350 Manufacturing Engineering strategy
Jean-Bernard Hentz PLM R&T Airbus PLM A350 Manufacturing Engineering strategy Content 1 1 AIRBUS today 2 2 AIRBUS PLM Strategy for manufacturing 3 Some ideas for advanced research 4 Conclusion a world
Herausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK?
www.dlr.de Folie 1 Herausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK? www.dlr.de Chart 2 First Generation Composite Airframe An
CHALLENGING PERSPECTIVES
STUDENTS AND GRADUATES NEWSLETTER CHALLENGING PERSPECTIVES A world of opportunities for your career October 2014 www.jobs.airbusgroup.com STEP ON BOARD FOR AN EXCITING FUTURE WE MAKE IT FLY We were created
Our track record for innovation Your chance to shape the future. Engineering opportunities in France, Germany, Spain and UK:
Our track record for innovation Your chance to shape the future Engineering opportunities in France, Germany, Spain and UK: Over the next 20 years, faced with more financial and environmental pressures
Flugzeugelektrik als technologische und. industrielle Herausforderung am Beispiel des A 380
Christoph Zammert Flugzeugelektrik als technologische und industrielle Herausforderung am Beispiel des A 380 Christoph Zammert Head of Improvement & Performance, Centre of Excellence Electrics, Airbus
PROPELLING MALAYSIA INTO GLOBAL AEROSPACE HUB FRANCIS HIEW MANAGING DIRECTOR SPIRIT AEROSYSTEMS MALAYSIA
PROPELLING MALAYSIA INTO GLOBAL AEROSPACE HUB FRANCIS HIEW MANAGING DIRECTOR SPIRIT AEROSYSTEMS MALAYSIA Spirit Spirit AeroSystems Malaysia Sdn Bhd Proprietary Information SPIRIT WORLDWIDE OPERATIONS WICHITA
EADS PZL WARSZAWA-OKĘCIE S.A.
EADS PZL WARSZAWA-OKĘCIE S.A. Kształcenie i badania naukowe w Lotnictwie i Kosmonautyce Politechnika Warszawska MEiL 28 stycznia 2011 EADS Divisions The Four Firm Walls EADS is built on Airbus organization
Annex 2 : Scenarios. I. Scenarios for students from Evry. 24 ECTS obtained by the following combination among First Year courses in Bologna:
Annex 2 : Scenarios A semester with less than 30 ECTS must be compensated by another semester in the same year with more than 30 ECTS to achieve a minimal number of 60 ECTS per year I. Scenarios for students
Radio Frequency Identification (RFID)
FAST47.qxp:FAST MASTER LAYOUT 20/12/10 10:20 Page 24 RADIO FREQUENCY IDENTIFICATION (RFID) - AIRBUS BUSINESS RADAR Radio Frequency Identification (RFID) Airbus business radar Radio Frequency Identification
Global Investor Forum 2008
Global Investor Forum 2008 Airbus Financial Workshop Seville, 17 th / 18 th January 2008 1 Safe Harbor Statement Certain of the statements contained in this document are not historical facts but rather
COMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic
COMPANY PROFILE AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic - The largest aerospace manufacturer in the Czech Republic - One of the oldest aerospace manufacturers in the world (*1919) -
Aeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
Lufthansa Technical Training China Company Presentation & Range of Products
Lufthansa Technical Training China Company Presentation & Range of Products Foreword Over the last 15 years Lufthansa Technical Training (LTT) has developed into the world s leading provider of basic and
FISS Full In Service Support
Market Development Services Design & Edition I September 2014 I EN FISS Full In Service Support EADS CONSTRUCCIONES AERONAUTICAS, S.A.U. (EADS CASA) Avenida de Aragón, 404-28022 Madrid, SPAIN Phone: +34
Communications.» Employer Branding. Becoming an Employer of Choice
Communications» Employer Branding Becoming an Employer of Choice » Recruitment and retention Managers and candidates have different perspectives on the same topic What recruiters think: We are a family-owned
Academy teachers and Industry Partner staff jointly developed and facilitate the programme.
Teach Too Case study Provider: Craven College Aviation Summary The Air Malta Project is one of a suite of programmes from L3 to HE level run by the Craven College Aviation Academy, based in Leeds and Bradford
CCP Recruitment 2015 Salary Survey
CCP Recruitment 2015 Salary Survey Technical & Engineering 2 Pharmaceutical & Medical Devices 3 Accountancy Industry & Support 4 Office Administration 4 Human Resources & Training 5 Supply Chain 6 Information
International Business School Suzhou at Xi a n Jiaotong-Liverpool University
MSc Operations and Supply Chain Management Full-time) ibss.xjtlu.edu.cn International Business School Suzhou at Xi a n Jiaotong-Liverpool University Welcome to International Business School Suzhou at Xi
Description Course Structure Course/Module Qualification/ Statements of Attainments Awarded Course Duration Funding Assistance The Aerospace WSQ is a holistic framework for training aerospace technicians.
Aircraft Cabin and Cabin Systems
Department of Automotive and Aeronautical Engineering EWADE 2005 7th European Workshop on Aircraft Design Education SupAéro, Toulouse Aircraft Cabin and Cabin Systems Dieter Scholz 1 Table of Contents
Samlesbury site & lean manufacturing. Frank Hayden Integrated Operations Director
Samlesbury site & lean manufacturing Frank Hayden Integrated Operations Director Samlesbury Site 4,500 people, Airframe design and manufacturing, In-service aircraft support Track record of international
Introductory event: Controlling Winter Term 2015/2016
Introductory event: Controlling Winter Term 2015/2016 Organizational Contact Seminar für ABWL und Controlling Universität zu Köln Albertus-Magnus-Platz 50923 Köln Phone: (0221) 470 4451 Fax: (0221) 470
RECRUITMENT SUPPORT TO THE AVIATION INDUSTRY
RECRUITMENT SUPPORT TO THE AVIATION INDUSTRY ZENON AVIATION Zenon Recruitment Services is one of Europe s fastest growing specialist suppliers of skilled personnel to the aviation industry. It s directors
Plan Bolonia, la hora de la verdad: incorporacion de nuevos titulados en la empresa
Plan Bolonia, la hora de la verdad: incorporacion de nuevos titulados en la empresa EADS as a Global Hi-Tech Company Cristobal Casado-Salinas Project Leader "EADS/Universities-Spain Partnership" 23 rd
Innovation Takes Off
Innovation Takes Off Clean Sky 2 General Information Day 28 November 2013, Lisbon SAT Transversal Activities Aniello Cozzolino, Piaggio Aero Industries Zdenek Mikulka, Evektor Innovation Takes Off European
ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY
ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY The work of the Talent Pipeline Task Force was inspired by our community s existing assets in the areas of education and workforce. Members consist
CONNECTING TALENT, IMPROVING BUSINESS
CONNECTING TALENT, IMPROVING BUSINESS Aviation experts We supply: Carbon60 are specialists in providing flexible and cost-effective engineering and technical experts. We connect the best industry professionals
Advanced MRO Solutions
Advanced MRO Solutions Reliability Expertise Trust Known for reliable, expert service for more than 20 years, Commercial Jet has earned the trust of the world's leading airlines, owners and operators.
facc Aerostructures Extend Your Expectations August 2015 Copyright FACC, 2012 Page 1
facc Aerostructures Extend Your Expectations August 2015 Page 1 Innovative, stable & light We develop and manufacture composite components for wings, empennage, and fairings. As a systems supplier and
Architectural Visualization. www.proyectodigital.com borgesi@proyectodigital.com (+34) 91 892 2509 (+34) 605 401 875
Architectural Visualization www.proyectodigital.com borgesi@proyectodigital.com (+34) 91 892 2509 (+34) 605 401 875 Proyecto Digital is an Architectural Illustration and Photography Studio. Created and
AVIATION DEVELOPMENT FUND
AVIATION DEVELOPMENT FUND AVIATION INNOVATION PROGRAMME AVIATION PARTNERSHIP PROGRAMME AVIATION MANPOWER PROGRAMME AVIATION PROMOTION PROGRAMME Committed to building a vibrant aviation industry and centre
Aircraft Commerce Recruitment
Aircraft Commerce Recruitment SOLVING ALL YOUR RECRUITMENT REQUIREMENTS Aircraft Commerce Journal Aircraft Commerce has been one of the industry s leading journals for the past 10 years. The journal features
The company Premium AEROTEC
The company Premium AEROTEC was founded as an independent company on 1 January 2009 and is a wholly owned subsidiary of EADS N.V. EADS Augsburg plant and Airbus Nordenham and Varel plants have been integrated
Portuguese Engineering & Tooling Cluster. ENGINEERING & TOOLING: A Cluster supporting Aerospace Industry
Portuguese Engineering & Tooling Cluster ENGINEERING & TOOLING: A Cluster supporting Aerospace Industry Portuguese Engineering & Tooling Cluster Tooling is one of the most dynamic Industries from Portugal,
CACRC - Repair Techniques Task Group
Repair Techniques Task Group Status Report Future plans WICHITA NOV 2007 1 WHY DO WE NEED TO STANDARDIZE REPAIR TECHNIQUES The Airlines have multi-airframe, multi-engine fleets NEEDS To be able to use
Annex 1: Correspondence between the study programs.
Annex 1: Correspondence between the study programs. The Interuniversity Agreement for the release of a multiple degree is based upon the correspondence between the study programs activated in the Laurea
Aeronautics. Industry - Maintenance - Engineering - Logistics
Aeronautics Industry - Maintenance - Engineering - Logistics A well-known leading player in the aeronautical outsourcing market Present in Europe A subsidiary in Spain : Derichebourg Atis Ibérica A subsidiary
Fall 2016 World Vision Interns (Monrovia)
Fall 2016 World Vision Interns (Monrovia) Location: [North America] [United States] [Monrovia] Category: Exceptions Job Type: Fixed term, Part-time PLEASE NOTE: You are able to indicate interest in up
HOROUG AIRCRAFT MAINTENANCE
Horoug Profile HOROUG AIRCRAFT MAINTENANCE www.horoug.com Copyright 2008-2010,, All rights reserved Contents INTRODUCTION ABOUT HOROUG VISION & MISSION OUR FACILITIES SERVICES AIRFRAME SERVICES ENGINE
SUCCESSFUL JOB HUNTING
SUCCESSFUL JOB HUNTING 11 TH JUNE 2015 Katie Bisaro, Andy Walsh, Hannah Posner & Rhiannon Williams UCL Careers Over to you discuss in pairs: What have you done in terms of job hunting? What has worked
Service overview Volunteer Western Bay of Plenty
Village on 17 th Ave West Tauranga 3140 Phone: 07 571 3714 admin@volunteerwbop.com www.volunteerwbop.com Service overview Volunteer Western Bay of Plenty In the last 12 months, our centre has added some
Aviation Programs. Where Careers Take Flight. Winner of the 2013 Loening Trophy
Aviation Programs Where Careers Take Flight Winner of the 2013 Loening Trophy SAVE THE DATES Aviation Career Conference Saturday, 11/21/15 Tuskegee Next Generation Workshop Saturday, 04/16/16 Sky s the
MARCH 2011 WISE. World In-Service Experience
MARCH 2011 WISE Content WISE Family Introduction WISE Knowledge Base WISE Component Performance & Recommendations WISE Main Adopted Solutions & Tips Conclusion Page 2 Introduction A source of information
Vorarlberg University of Applied Sciences - Dornbirn, Austria
The Magellan Exchange GRADUATE/MASTER Course Offerings in English List is as up-to-date as possible as of 30 November 2015 (Variation may occur; please use this as a general guide only. Credits and course
Engineering Graduate Training Scheme "A" Electronics Engineering. Model Training Guide
Engineering Graduate Training Scheme "A" Electronics Engineering Model Training Guide 1 Model Training Guide (MTG) The Model Training Guide is, as the name suggests, a guide to Companies on the practical
MOLD SHOP OF THE FUTURE
MOLD SHOP OF THE FUTURE STABLE PROCESSES 2 IS YOUR COMPANY READY FOR THE FUTURE? Companies and markets are increasingly exposed to the many different influential factors created by interaction in the global
IT SOLUTIONS. Market Development Services Design & Edition I September 2014 I EN
Market Development Services Design & Edition I September 2014 I EN IT SOLUTIONS EADS CONSTRUCCIONES AERONAUTICAS, S.A.U. (EADS CASA) Avenida de Aragón, 404-28022 Madrid, SPAIN Phone: +34 91 585 7387/5561
INGENIERÍA DE EDIFICACIÓN BUILDING ENGINEERING (SUBJECT S LIST UPDATED IN APRIL, 2015)
INGENIERÍA DE EDIFICACIÓN BUILDING ENGINEERING (SUBJECT S LIST UPDATED IN APRIL, 2015) (E): Elective courses ALL LECTURES ARE TAUGHT IN SPANISH LANGUAGE CURSO CONSTRUCCIÓN I. HISTORIA, TIPOLOGÍAS Y FUND.
Innovation Takes Off
Innovation Takes Off Clean Sky 2 Information Day dedicated to the CFP04 ITD Systems Brussels, June 2016 Innovation Takes Off From Clean Sky towards Clean Sky 2 Systems ITD follows and expands Clean Sky
Executive summary. - It has a favorable geographical location with significant direct solar irradiation.
Executive summary Introduction The use of solar concentrated energy in thermal applications has very little presence in Spain. In particular, the integration of solar thermal systems in district heating
Co-located with: 5. Innovative. Aircraft Seating 2014 AIRCRAFT CABIN Composites & Lightweight Materials
Co-located with: 5 th International Conference Aircraft Seating 2014 Save weight Reduce costs Ensure operational excellence 27 29 October 2014 Radisson BLU Hotel, Hamburg Airport, Conference Chairman:
REQUEST FOR PROPOSAL. Provision of Content for the Digital Business Academy. Issued by: Tech City UK
REQUEST FOR PROPOSAL Provision of Content for the Digital Business Academy Issued by: Tech City UK Date of issue: 23 February 2015 This document is an invitation for proposals to provide content for s
Inside Track Formula 1. Dr David Delamore-Sutcliffe
Inside Track Formula 1 Dr David Delamore-Sutcliffe Background My Career to Date Bristol University Graduate MEng Degree in Aeronautical Engineering Graduated Summer 2002 PhD in Experimental Aerodynamics
How To Get A Job At Swansea University
Sport AND EXERCISE Science MPLOY BILITY guidance information advice key dates HELPING YOU TO SUCCEED Inside this leaflet you will find guidance on the "I m positive that support you can expect from us,
Services. Through Life Spares.
Services Through Life Spares. STAG Group Services STAG Group s core competence is aircraft parts management; being flexible and adapted to individual customer requirements. STAG Group further provides
Comfort without compromise
Zuzana Hrnkova Head of Aircraft Interiors Marketing Comfort without compromise Every inch counts How can an airframe manufacturer influence cabin comfort and efficiency? Does an inch really matter? Efficient
The Plan Category. Middle East Academy For Training & Consulting. Training Plan 2016. Public Relations. Leadership and Management. Sales and Marketing
Middle East Academy For Training & Consulting ل د للتدريب واإلستشارات Training Plan 2016 The plan contains about Eighteen specialty specialty contain all the programs listed. Each program contains three
EUROPASS DIPLOMA SUPPLEMENT TO HIGHER TECHNICAL VOCATIONAL TRAINING
EUROPASS DIPLOMA SUPPLEMENT TO HIGHER TECHNICAL VOCATIONAL TRAINING TITLE OF THE DIPLOMA (ES) Técnico Superior en Sistemas Electrotécnicos y Automatizados TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher
Thales capabilities will meet and exceed civil aviation synthetic training requirements. www.thalesgroup.com/services
Civil Aviation Training Capabilities Thales capabilities will meet and exceed civil aviation synthetic training requirements www.thalesgroup.com/services THE FoRMATION PRODUCT LINE BY THALES TOTAL CAPABILITIES
Airbus Progamme Review
Airbus Progamme Review Tom WILLIAMS Executive Vice President Programmes Global Investor Forum 2009, Broughton, 1 st & 2 nd April 2009 1 1 Safe Harbour Statement Disclaimer This presentation includes forward-looking
Information for visitors
Information for visitors World leading trade fair for intralogistics & supply chain management 31 May 3 June 2016 Hannover Germany cemat.com With the tagline Smart Supply Chain Solutions, CeMAT 2016 will
Aerospace Industry & Engineering in the UK
Aerospace Industry & Engineering in the UK contents 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Industry Introduction Aerospace Engineering Opportunities and Environmental Regulations UK Aerospace Institute
PZL Warszawa-Okęcie S.A. an Airbus Defence and Space Company Company Presentation
This document and all information contained herein is the sole property of Airbus Defence & Space. No intellectual property rights are granted by the delivery of this document or disclosure of its content.
maintenance PROMISmaintenance Engineering Maintenance Management Process
PROMISmaintenance Engineering Maintenance Management Process The names PROMIS, mypromis, deploypromis and PROMISLingua are Europe wide protected brands Engineering Maintenance Management Process In today's
Ireland HUDSON SALARY GUIDES 2015
Ireland HUDSON SALARY GUIDES 2015 ABOUT THIS PUBLICATION This Salary Guide is a compilation of salary and market information provided by Hudson consultants, clients, candidates and other sources in Ireland.
Please find below the wide range of industries and job roles in which our BSc (IS Management) students have served their internships.
Please find below the wide range of industries and job roles in which our BSc (IS Management) students have served their internships. Administration & Support Services Arts, Entertainment, Recreation Construction
Asset Management Contingency Planning
Asset Management Contingency Planning Aircraft Asset Management Training Seminar October 29th, 2012 Hong Kong, China Presented By: Shannon Ackert SVP, Commercial Operations Jackson Square Aviation Wisdom
Report to the Board of Governors on Elizabeth City State University s Aviation Related Initiatives
Report to the Board of Governors on Elizabeth City State University s Aviation Related Initiatives Elizabeth City State University has many initiatives underway related to aviation. Some are fully functional
Masters. Scienceof. Accredited by the French Ministry of higher education
Masters Scienceof Accredited by the French Ministry of higher education 2015 What is a Master of Science? Masters of Science, or DNM, are national degrees accredited by the French Ministry of Higher Education,
TSE Academy Supply Chain Faculty. Longs EU - Supply Chain Excellence
TSE Academy Supply Chain Faculty Longs EU - Supply Chain Excellence Neil Harriman Linking Supply Chain Education to Job Profiles & Skills 19 th March 2015 Together we make the difference Tata Steel Slide
How To Study Mobility And Logistics At Rhine-Waal University Of Applied Sciences
Mobility and Logistics, B.Sc. in English Kamp-Lintfort Campus Faculty of Communication and Environment Mobility and Logistics, B.Sc. Fact file Place of study Kamp-Lintfort Start date In winter semester
1. Brief Overview of ET Business. EAA 3. EAA s Strategy and Future Plan
Aviation Training: a critical factor for the growth of Ethiopian i Airlines Getachew Biru Worku (Dr.-Ing) Dean Ethiopian Aviation Academy Outline 1. Brief Overview of ET Business 2. ET Training i Activity
MBA Careers Workshop. Consulting Skills. Fiona Salzen February 2014. MBA Workshop - Consulting Careers 1
MBA Careers Workshop Consulting Skills Fiona Salzen February 2014 MBA Workshop - Consulting Careers 1 Workshop Objectives 1.Insight into the industry 2.Consulting skills 3.Career structure and entry points
ELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO
ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical
Master of Business Management
Master (Master Administration des Entreprises of the University of Lorraine) The master (2 semesters) International Track General Track isam-iae.univ-lorraine.fr University Diploma in (1 semester in English)
Technical & Engineering: AEROSPACE & DEFENCE
: Providing Qualified Professionals Be Exceptional About us Recruitment Process Client Support Aerospace & Defence Industry Contact About us Cordant provide a specialist approach to aerospace resourcing.
Basic Training. Modern training concepts in accordance with the EASA requirements
Basic Training Modern training concepts in accordance with the EASA requirements Member of the Lufthansa Technik Group Quality based on experience Foreword Lufthansa Technical Training (LTT) can look back
EURES REGIONE UMBRIA Servizio Politiche Attive del Lavoro
EURES REGIONE UMBRIA Servizio Politiche Attive del Lavoro EURES Padova, in sinergia con lo ZAV di Bonn e il supporto di Veneto Lavoro, organizza a livello nazionale un reclutamento per l'assunzione di
Implementation of performance-based navigation (PBN) in the SAM Region FOLLOW-UP ON ACTIVITIES OF THE PBN OPERATIONAL IMPLEMENTATION PROJECT
International Civil Aviation Organization SAM/IG/11-WP/04 South American Regional Office 24/04/13 Eleventh Workshop/Meeting of the SAM Implementation Group (SAM/IG/11) - Regional Project RLA/06/901 (Lima,
ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT
ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and
HR COMPETENCY DEVELOPMENT OFFERINGS
HR COMPETENCY DEVELOPMENT OFFERINGS HR COMPETENCY DEVELOPMENT We offer a variety of learning experiences designed to build skill, performance, and selfawareness in HR professionals. We have workshops designed
Corporate Masters of Business Administration. Aviation Management
Corporate Masters of Business Administration Aviation Management Introduction University of Limerick The University of Limerick offers programmes of education and research to doctorate level in its four
MODULE 11B. PISTON AEROPLANE AERODYNAMICS, STRUCTURES AND SYSTEMS
MODULE 11B. PISTON AEROPLANE AERODYNAMICS, STRUCTURES AND SYSTEMS Note: The scope of this Module should reflect the technology of aeroplanes pertinent to the A2 and B1.2 subcategory. 11.1 Theory of Flight
Canadore School of Aviation
Canadore School of Aviation INTERNATIONAL STUDENT INFORMATION NORTH BAY, ONTARIO, CANADA 1 Train to work in the Aviation Industry in Canada! The College Canadore College is ideally situated in North Bay,
Programme Discussions Wissenschaftstag Braunschweig 2015 Laminarität für zukünftige Verkehrsflugzeuge
Programme Discussions Wissenschaftstag Braunschweig 2015 Kevin Nicholls, EIVW Prepared by Heinz Hansen TOP-LDA Leader, ETEA Presented by Bernhard Schlipf, ESCRWG Laminarität für zukünftige Verkehrsflugzeuge
Developments and Challenges for Aluminum A Boeing Perspective
MATERIALS FORUM VOLUME 28 - Published 2004 Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 24 Developments and Challenges for Aluminum A Boeing Perspective