PZL Warszawa-Okęcie S.A. an Airbus Defence and Space Company Company Presentation
|
|
- Noah Carroll
- 8 years ago
- Views:
Transcription
1 This document and all information contained herein is the sole property of Airbus Defence & Space. No intellectual property rights are granted by the delivery of this document or disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus Defence & Space. This document and its content shall not be used for any other purpose than for which it is supplied. PZL Warszawa-Okęcie S.A. an Airbus Defence and Space Company Company Presentation October 2015
2 Company Overview Strategic Location WARSAW Al.Krakowska 110/ Warsaw MIELEC Mielec Airport EPML Our main Customers
3 5 Areas of activity Assembly of aerostructures, production of components, managing supply chain and engineering Aerostructures Warsaw Service Center for C295 fleet of PAF (technical checks, overhaul and repairs, spare parts) Design and production of PZL- 130 TC-II Orlik for PAF Aircraft manufacturing Warsaw MRO Warsaw
4 Aerostructures Warsaw Aircraft Range of production 2014 A330 Section 13 Central Box Central Box Detailed parts Electrical Harnesses C295 /CN235 Cargo Door and Ramp Doors Seats Rear parts of Fuslage Front Cockpit Fuslage Aluminium Alloy Detail Darts Electrical Harnesses Wing Colon 110 a/c 107 a/c 107 a/c 114 a/c A400M Electrical Harnesses 10 a/c (over 760 un)
5 5 Areas of activity Aviation services, agro, firefighting, patrol using over 50 a/c Also training Centre Space activities New Businness Opportunities Aviation services Mielec Space Warsaw
6 Manufacturing Capabilities Assembly Over the years we delivered with success to Client s components for CASA and AIRBUS Airbus A330 Section 13 and Central Box- over 100 deliveries yearly Production airframe structural assembly based on manufacturing documents Assembly of metal and composite structures incl. surface protection Fitting, adjustment and completion operations Manual drilling and riveting Sealing and painting
7 Manufacturing Capabilities Sheet Metal On yearly basis we manufacture for our customers around sheet metal parts at different level of complexity Milling & Drilling Heat Treatment Bending Process Hydroforming Process Finishing & Straightening PORTATEC, high speed milling centre basic II and V, 3 axis milling (2050mm x 1550mm)and (4050mm x 1550mm) Oven SOLO (1mx1mx2m), type HT-123, class II Type B AMADA, HFT100-3 (length 3000m) Hydraulic press ASEA QUINTIS FLUID CELL PRESS (2 tables), CF F table dimensions 2000x900x150 mm, max. 700ton, Manual job qualified workers
8 Manufacturing Capabilities Electrical Harnesses In 2014 we performed over deliveries 80% of the demand of ADS Military Aircraft for electrical harnesses Cutting & Laser marking Cutting & Laser marking Heat Shrink & Label Printer Overbraiding machine Testing machine Laselec ULYS 110 Modena, multispool system. According to norm: AIPS / AIPI AIPS / AIPI Spectrum Technologies Capris 60. According to norm: AIPS / AIPI AIPS / AIPI Typo Electronics TE124 Identification Heat Shrink and Label Printer TMS-SCE, CM-SCE-TP, D-SCE SPIRALTEX Industries with 24 & 32, 48 bobbins According to norm: AIPS ET-MTIR-IEL Hughes DITMCO machine for testing harnesses
9 Additional range of activities Design Centre Training for maintenance personel Galvanic process Inspection, repair and overhaul of LRU and accessories
10 This document and all information contained herein is the sole property of Airbus Defence & Space. No intellectual property rights are granted by the delivery of this document or disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus Defence & Space. This document and its content shall not be used for any other purpose than for which it is supplied. Marzena Osowska Matasz Head of Commercial Business Development Mobile: Marzena.Osowska@pzl.eads.net
EADS PZL WARSZAWA-OKĘCIE S.A.
EADS PZL WARSZAWA-OKĘCIE S.A. Kształcenie i badania naukowe w Lotnictwie i Kosmonautyce Politechnika Warszawska MEiL 28 stycznia 2011 EADS Divisions The Four Firm Walls EADS is built on Airbus organization
More informationFISS Full In Service Support
Market Development Services Design & Edition I September 2014 I EN FISS Full In Service Support EADS CONSTRUCCIONES AERONAUTICAS, S.A.U. (EADS CASA) Avenida de Aragón, 404-28022 Madrid, SPAIN Phone: +34
More informationCOMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic
COMPANY PROFILE AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic - The largest aerospace manufacturer in the Czech Republic - One of the oldest aerospace manufacturers in the world (*1919) -
More informationBucharest, Romania 44 Ficusului Blvd. Zip code 013975, sector 1 www.romaero.com ROMAERO s premises - in Northern Bucharest, near Baneasa Airport Platform access for all categories of aircraft direct road
More informationIsrael s Aerospace Industry. Higher Faster Farther
Israel s Aerospace Industry Higher Faster Farther April 2013 Areas of Activity Civil/Commercial Aviation Space Applications Military & Defense Israel Aerospace Innovation Aviation Space UAV Gulfstream
More informationPROPELLING MALAYSIA INTO GLOBAL AEROSPACE HUB FRANCIS HIEW MANAGING DIRECTOR SPIRIT AEROSYSTEMS MALAYSIA
PROPELLING MALAYSIA INTO GLOBAL AEROSPACE HUB FRANCIS HIEW MANAGING DIRECTOR SPIRIT AEROSYSTEMS MALAYSIA Spirit Spirit AeroSystems Malaysia Sdn Bhd Proprietary Information SPIRIT WORLDWIDE OPERATIONS WICHITA
More informationThe Art of Safe Landings
The Art of Safe Landings Reliable. From landing to take-off. Over 100 years of experience... In 1911, 21 year-old Anthony Fokker flew his home-built aircraft over the city of Haarlem. In 1919, one of the
More informationGE Aviation. Aerostructures Facility Overview. GE Aviation
GE Aviation Aerostructures Facility Overview This document provides information on the capabilities and facilities at the GE Aviation aerostructures business at Hamble, in the UK, including its history
More informationNew PZL-106 KRUK. SINDAG Jun-13
New PZL-106 KRUK SINDAG Jun-13 B U S I N E S S C O M P A N Y Airbus Military EADS PZL Company Overview In 2001 acquired by EADS CASA (Airbus Military) Shareholder Distribution: Locations in Poland Warsaw:
More informationThe Aerospace and Defense Products and Services Guide
About the The Aerospace and Defense The guide is a user-friendly forum designed to bring suppliers and end-users together. Available whenever you need it, the guide makes it easy to locate products and
More informationPRESENTACIÓN DE LA COMPAÑIA. Company presentation 2014
PRESENTACIÓN DE LA COMPAÑIA Company presentation 2014 ABOUT US SCP: Distribution know-how in connectors, cables, accessories, heat shrink and tools SINTERSA: Unique know-how in design, manufacture, test
More informationPrecision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
More informationRecommended Program of Study for: Transportation, Distribution & Logistics
Career Cluster: Pathway Name: s Algebra I Geometry Algebra II or Math Elective Physical Science Biology Repair A Repair B Repair C Repair D A B C D Master Senior Career Pathway Project Career Cluster:
More informationThe company Premium AEROTEC
The company Premium AEROTEC was founded as an independent company on 1 January 2009 and is a wholly owned subsidiary of EADS N.V. EADS Augsburg plant and Airbus Nordenham and Varel plants have been integrated
More informationAIRBUS GROUP AUSTRALIA PACIFIC
AIRBUS GROUP AUSTRALIA PACIFIC GLOBAL EXPERTISE LOCAL FOCUS Airbus Group Australia Pacific is a part of Airbus Group, a global leader in aeronautics, space and related services. The Group comprises the
More informationAIRCRAFT MECHANIC SERIES
AIRCRAFT MECHANIC SERIES Occ. Work Prob. Effective Code No. Class Title Area Area Period Date 2040 Aircraft Maintenance Mechanic Helper 06 004 6 mo. 07/29/88 2552 Senior Aircraft Maintenance Mechanic 06
More informationAirbus Procurement Organisation & Major Suppliers
Airbus Presentation Airbus Airbus Organisation & Major Suppliers Airbus Presentation Organisational Structure Airbus & Airbus Group Strategy & Services Commodities Aerostructure Airbus Group General *
More informationIT SOLUTIONS. Market Development Services Design & Edition I September 2014 I EN
Market Development Services Design & Edition I September 2014 I EN IT SOLUTIONS EADS CONSTRUCCIONES AERONAUTICAS, S.A.U. (EADS CASA) Avenida de Aragón, 404-28022 Madrid, SPAIN Phone: +34 91 585 7387/5561
More informationYOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS CASTINGS WELDING FORGINGS CNC PLATE MACHINING CASTINGS WELDING There are many obvious benefits for you by choosing to use castings.
More informationAircraft performance monitoring
Regional Seminar Aircraft performance monitoring Presented by Steve BARKER / Senior Performance Engineer Contents 1 2 3 4 5 6 7 What is aircraft performance monitoring? Performance monitoring principle
More informationDESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationTraining Catalogue. Training Catalog WE QUALIFY! PART-147 APPROVED TRAINING CENTER
Training Catalogue Sabena technics Email training : training@sabenatechnics.com reserves the right to modify this document at its sole discretion. 1 / 58 Table of Contents Welcome... 3 Introduction...
More informationAutomated Strength Analysis Processes for Aircraft Structures
Automated Strength Analysis Processes for Aircraft Structures Automatisierte Festigkeitsanalyseprozesse für Flugzeugstrukturen Univ.-Prof. Dr. Martin Schagerl Overview Structure Build-Up Structure Design
More informationSikorsky Aerospace Services A new world of support
Sikorsky Aerospace Services A new world of support Introducing Sikorsky Aerospace Services Rotary Wing. Fixed Wing. Complete fleet solutions. Any mission. One aviation service partner. Sikorsky Aerospace
More informationMeeting Room Booking System Allan MacDougall. Room Booking System at Airbus, Filton.
Meeting Room Booking System Allan MacDougall Room Booking System at Airbus, Filton. Content Company Overview Room booking system summary Business Issues Key Benefit Summary of overall benefits 2015 Airbus
More informationUT ULTRATECH. ULTRATECH Ltd. - partner in MagForming Project (EU 6FP Contract No.036852)
ULTRATECH was founded in the year 2000 as Polish owned private limited company (Ltd.) 27 July 2000 ULTRATECH s Ltd. Court registration In the end of year 2000 the first CNC Japanese milling centre and
More informationAdvanced Systems & Equipment
Advanced Systems & Equipment Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and
More informationATR. freighter versions
ATR freighter versions ATR freighter versions ATR AND CARGO MARKET ATR Freighter Fleet In service (Dec 21) 31 4 5 3 5 2 2 Photo: Ron Baak, Netherlands. First ATR 72 Freighter delivery took place in July
More informationoperation objectives
www.wzk.com.pl location WZK operation objectives -OUR CUSTOMERS WZK is committed to meeting customers highest expectations -OUR EMPLOYEES WZK seeks to provide a safe, productive and rewarding work environment
More informationAeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
More informationHeavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version
OLYM-S24D-C24D The Olympus 4HD is a heavy duty solenoid controlled access lock available with either a stainless steel tongue actuator or a heavy duty handle. The Olympus 4HD is capable of supporting Category
More informationOur main goal is: Quality Procedures and Outstanding Service
Our main goal is: Quality Procedures and Outstanding Service Our emploeeys have decades of solid experience and knowhow in Plant Maintenance All technical service at one place, mechanical, electrical,
More informationThermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
More informationWorld Class Precision Engineering
World Class Precision Engineering www.mercaerospace.co.uk aerospace defence petrochemical energy A tradition of delivering world class precision engineering Merc Aerospace is a world class precision engineering
More informationSEMAE3221 Machining aircraft components using CNC milling machines
Machining aircraft components using CNC milling machines Overview This standard identifies the competences you need to operate Computer Numerical Control (CNC) three axis or five axis machines or CNC machining
More informationYour Service Partner Avonmouth and Bristol Service Centres
Your Service Partner Avonmouth and Bristol Service Centres The Sulzer Advantage Avonmouth Service Centre Bristol Service Centre Capabilities Manual machining CNC machining Pump services Thermal spray
More informationPatternmaking CAD CAM models Jigs and fixtures Press tools
Lofting Services North West CNC precision machining Patternmaking CAD CAM models Jigs and fixtures Press tools Lofting Services North West Human Head Stage 1 Machining used to simulate fighter pilot retinal
More informationMARCH 2011 WISE. World In-Service Experience
MARCH 2011 WISE Content WISE Family Introduction WISE Knowledge Base WISE Component Performance & Recommendations WISE Main Adopted Solutions & Tips Conclusion Page 2 Introduction A source of information
More informationAutobody/Collision and Repair Technology/Technician CIP 47.0603 Task Grid
1 Secondary Task List 100 ORIENTATION 101 Identify opportunities in the auto body field. 102 Identify basic auto body construction. 103 Identify program rules and policies. 104 Identify government agencies
More informationValue and Developments on EDI from an MRO's Perspective
Value and Developments on EDI from an MRO's Perspective ATA ebusiness Forum 2014 Sven A. Heitsch Head of Strategy and Technology AG, Hamburg Lufthansa Group The five business segments Passenger Transportation
More informationProject Scope. Perform a major step forward in Airbus Virtual Testing (VT) capability of structures. Project launch Design Certification
Presented by Michel MAHÉ Prepared by Michel MAHÉ, Jean-François IMBERT, Christophe BRAND Aircraft Virtual Structural Testing: Challenges for Structure Analysis Aircraft Virtual Structural Testing: Challenges
More informationApplication For General Liability Coverage
HOLMAN INSURANCE BROKERS LTD. Application For General Liability Coverage Instructions Please read carefully This application form deals with all areas of operations that may require this type of coverage.
More informationDESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT
DESIGN PROTOTYPE TOOL & DIE BUILD PRODUCTION SERVICE & SUPPORT THE PTM ADVANTAGE PTM has been producing metal stampings since 1972. Our expertise and experience is wide ranging, to include detail part
More informationEmmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT
Emmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT To increase the efficiency of aircraft tooling manufacture at its Dukinfield factory, near Manchester,
More informationfacc Aerostructures Extend Your Expectations August 2015 Copyright FACC, 2012 Page 1
facc Aerostructures Extend Your Expectations August 2015 Page 1 Innovative, stable & light We develop and manufacture composite components for wings, empennage, and fairings. As a systems supplier and
More informationDevelopments and Challenges for Aluminum A Boeing Perspective
MATERIALS FORUM VOLUME 28 - Published 2004 Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 24 Developments and Challenges for Aluminum A Boeing Perspective
More informationTransforming and optimization of the supply chain to create value and secure growth and performance
Transforming and optimization of the supply chain to create value and secure growth and performance Niedersachsen Aviation, Jahresnetzwerktreffen Hannover, 10th December 2015 Today s storyboard Short introduction
More informationType Acceptance Report
TAR 98/05 PZL M18B "Dromader" Aircraft Certification Unit TABLE OF CONTENTS INTRODUCTION 1 FOREIGN TYPE CERTIFICATE DETAILS 1 TYPE ACCEPTANCE APPLICATION 1 TYPE DATA 2 ADDITIONAL NEW ZEALAND CERTIFICATION
More informationNUARB TRAINING ACADEMY
NUARB TRAINING ACADEMY NUARB TRAINING ACADEMY Adding value to your people COPYRIGHT: The course materials are protected by Copyright laws and may not be reproduced or distributed without consent by NUARB
More informationAIRWORTHINESS BULLETIN
1. Effectivity Beech B200/300. 2. Purpose To alert operators of Beech B200/300 aircraft of the potential for inverter wiring damage that may lead to a fire in the inboard wing. 3. Background When a Beech
More informationCACRC - Repair Techniques Task Group
Repair Techniques Task Group Status Report Future plans WICHITA NOV 2007 1 WHY DO WE NEED TO STANDARDIZE REPAIR TECHNIQUES The Airlines have multi-airframe, multi-engine fleets NEEDS To be able to use
More informationAVIATION MAINTENANCE TECHNOLOGY
HYBRID PROGRAM AVIATION MAINTENANCE TECHNOLOGY FIRST EVER FAA APPROVED AVIATION MAINTENANCE PROGRAM OFFERED PARTIALLY ONLINE OUR HISTORY W.G. Skelly, an oil magnate, founded Spartan as an aircraft manufacturing
More informationin Tunisia... invest in Tunisia
Aerospace I n d u s t r y in Tunisia... invest in Tunisia invest in Tunisia A booming industry 9,000 jobs 65 companies Aerospace industry in Tunisia is experiencing a real boom over the last decade illustrated
More informationBAUER Manufacturing Inc.
BAUER Manufacturing Inc. Conroe, Texas Supplying Equipment and Services to Industry 2/2013 BAUER Manufacturing Inc. BAUER Manufacturing Inc. (BMC) is located in the City of Conroe, Texas, approximately
More informationComfort without compromise
Zuzana Hrnkova Head of Aircraft Interiors Marketing Comfort without compromise Every inch counts How can an airframe manufacturer influence cabin comfort and efficiency? Does an inch really matter? Efficient
More informationNETWORKED FACTORY. SABCA: links with our customers
1 NETWORKED FACTORY SABCA: links with our customers CONTENT SABCA Plants & Main Activities working processes with aircraft manufacturers Used network Conclusion SABCA PLANTS SABCA S.A. (Bruxelles) SABCA
More informationCustomer Services. More Value
Customer Services More Value < Contents 3 Levels of Operations Machine Business GF AgieCharmilles 4-5 6-7 10-11 12-13 14 CUSTOMER SERVICES more VALUE OPERATIONS SUPPORT MACHINE SUPPORT BUSINESS SUPPORT
More informationCommercial Jet Aircraft-Market Outlook
Introduction Air transportation is a vital component in our growing economy for the movement of people and goods. From safety point of view, the Federal Aviation Administration (FAA) predicts an increase
More informationStudent Academic Achievement Committee (SAAC) Standardized Report Form
Student Academic Achievement Committee (SAAC) Standardized Report Form INTRODUCTION Program/Discipline Title: Aviation Maintenance Technology Time Period: spring 2011, summer 2011, fall 2011 Program goals,
More informationDIE SETS - MACHINED PLATES ACCORDING TO DRAWING CONTENTS
DIE SETS MACHINED PLATES ACCORDING TO DRAWING CONTENTS Page MACHINE CAPACITIES 2.02 SPECIAL DIE SETS 2.032.07 MDL GEOMETRIC STANDARDS 2.08 DIMENSIONING INSTRUCTIONS FOR SPECIAL 2.09 RECTANGULAR DIE SETS
More information7.1 Safety Precautions-Aircraft and Workshop 3 3 3. 7.2 Workshop Practices 3 3 3
Note: This module does not apply to category B3. Relevant subject matters for category B3 are defined in module 7B. 7.1 Safety Precautions-Aircraft and Workshop 3 3 3 Aspects of safe working practices
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationE&P HYDRAULICS Remote control EPRC-01 Level System Camper
USER S GUIDE E&P HYDRAULICS Remote control EPRC-01 Level System Camper 1 Copyright 2012, E&P Hydraulics This manual is copyrighted, with all rights reserved. Under the copyright laws, this may not, in
More informationwww.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
More informationTolerance Charts. Dr. Pulak M. Pandey. http://paniit.iitd.ac.in/~pmpandey
Tolerance Charts Dr. Pulak M. Pandey http://paniit.iitd.ac.in/~pmpandey Introduction A tolerance chart is a graphical method for presenting the manufacturing dimensions of a workpiece or assembly at all
More informationPortuguese Engineering & Tooling Cluster. ENGINEERING & TOOLING: A Cluster supporting Aerospace Industry
Portuguese Engineering & Tooling Cluster ENGINEERING & TOOLING: A Cluster supporting Aerospace Industry Portuguese Engineering & Tooling Cluster Tooling is one of the most dynamic Industries from Portugal,
More informationCollaborative Supply Chain
Collaborative Supply Chain Presented by Mr. F. R. Singhvi Joint Managing Director, Sansera Engineering Private Limited, Bangalore, India. Challenges for Supply Chain: Mid-to long-term Collaboration Competitiveness
More informationRapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationAerospace Supply Chain & Raw Material Outlook
Aerospace Supply Chain & Raw Material Outlook Presented by: Dr. Kevin Michaels Global Managing Director Aviation Consulting & Services ICF SH&E SpeedNews 4 th Aerospace Raw Materials & Manufacturers Supply
More informationYOUR LOCAL SOURCE IN A GLOBAL WORLD GLOBAL OUTSOURCING
GLOBAL OUTSOURCING Save from 30% to 75% on your components with fi nished machined components from China. In China there are millions of subcontractors but only a few of these are able to supply high-quality
More informationWhat is a Repair Station and how do I select the right one for me?
What is a Repair Station and how do I select the right one for me? A Consumer Guide To Help You Select The Repair Station That Is Right For You National Air Transportation Association 1 What is a Repair
More informationPARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
More informationOperation Weatherman. Extreme weather damage recovery project
Operation Weatherman Extreme weather damage recovery project SQUADRON LEADER JOHN GORMAN C-130 Airframe Manager, Royal Air Force CHARLES HUGHES VP Business Development & Strategy, Marshall ADG MIKE GECZY
More informationAerospace Supply Chain & Raw Material Outlook
Aerospace Supply Chain & Raw Material Outlook Presented by: Peter C. Zimm Principal 1 Agenda Aerospace Demand Outlook Aerospace Supply Chain Trends 2 AEROSPACE DEMAND OUTLOOK Total aircraft production
More informationEuropean Aviation Safety Agency: Ottoplatz 1, D-50679 Cologne, Germany - easa.europa.eu
EASA.A.527 Description: Language: TCDS: Product type: Manufacturer/TC Holder: A.527 AQUILA AT01 English EASA.A.527 Aircraft (CS-25, CS-22, CS-23, CS-VLA, CS-LSA) AQUILA Aviation GmbH European Aviation
More informationEDUCATION IS THE KEY TO SUCCESS Aviation Maintenance Training School (AMT School) www.amtmiami.com www.amtschool.com
A&P Oral and Practical Exam Guaranteed Preparation Course 1-Week (7 Days) Oral and Practical Exam Preparation One Price with No Hidden Fees (see web site for pricing) (Includes a Set of 3 ASA Q&A Books
More informationCUTform OÜ. Management System Manual
Page: 1, Total pages: 11 Written Natali Aosaar Confirmed Document name: Amendment information Version Amended clause 4 1.2 Quality is available from web 4 1.3 Updated 4 3 Organisation chart updated 4 5
More informationStudy also shows defense sector must readjust to lower U.S. and European federal budgets
Contacts: Edward Moore +44 20 7404 5959 alixpartners@brunswickgroup.com Tim Yost +1.248.204.8689 tyost@alixpartners.com Aerospace Supply Chain Faces Harsh Reality of Having to Deliver Huge Backlog of Orders
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationBenito Gritzewsky. Chairman of the Board FEMIA
Benito Gritzewsky Chairman of the Board FEMIA Mexican Federation of Aerospace Industry (FEMIA) Mexican Association of Aerospace Companies Private, non-profit organization. Established in 2007. More than
More informationRFID in the Lufthansa Technik Group Technology for Logistics and Maintenance Processes
Technology Logistics and Maintenance Processes Agenda Company Profile RFID Approach Current use-cases of RFID Permanent Parts Marking Upcoming Applications 2 2 Copyright 2010 2011 AG. Logistik All rights
More informationENGINEERING RELEASE MODEL: LEARJET MODEL 20 AND 35/36 SERIES DRAWING. NO.: 02907011 SHEET: 1 OF 1
ENGINEERING RELEASE DRAWING. NO.: 02907011 MODEL: LEARJET MODEL 20 AND 35/36 SERIES SHEET: 1 OF 1 Butler National Corporation Olathe, Kansas DRAWING TITLE: INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR
More informationMilitary Aerospace Communications Industrial Medical. Outsourced Manufacturing Solutions. Customized for high-reliability markets
Military Aerospace Communications Industrial Medical Outsourced Manufacturing Solutions Customized for high-reliability markets High Reliability Markets Our customers often operate in harsh environments
More informationWelcome for your visit <<<
Professionalism Stems From Our Specialization Green Technology Leads Our Future Welcome for your visit
More informationAUTO COLLISION REPAIR CERTIFICATE I COURSE DESCRIPTIONS. Total: 18 Credit Hours
CERTIFICATE I COURSE DESCRIPTIONS Total: 18 Credit Hours ACT 101 INTRODUCTION TO AUTOMOTIVE COLLISION TECHNOLOGY 4 Credit Hours Designed as an orientation to the automotive collision repair industry. Students
More informationMetalworking to go. Discover direct on-site mobile machining!
Metalworking to go Discover direct on-site mobile machining! Benefit from intelligent machining methods right on site With Miba s mobile CNC machining units Wherever and whatever you want to machine directly
More informationAircraft (CS-25, CS-22, CS-23, CS-VLA, CS-LSA) AERO AT Sp.z.o.o
EASA.A.021 Description: Language: TCDS: Product type: Manufacturer/TC Holder: A.021 Aero AT-3 R100 English EASA.A.021 Aircraft (CS-25, CS-22, CS-23, CS-VLA, CS-LSA) AERO AT Sp.z.o.o European Aviation Safety
More informationAIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES AIRCRAFT SERVICES
AIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES AIRCRAFT SERVICES KEY COMPANY FACTS One of the leading global MRO service providers Around 500 customers worldwide
More informationHow To Replace A Lower Rail
5. Front Lower Rail Assembly Lower Rail Sub-Assembly The lower rail service part comes as a sub-assembly, which consists of seven brackets and panels. Instuction sheets and templates are also included.
More informationHG600/HG800. Hydro-Power Unit. Installation and Operation Guide
HG600/HG800 Hydro-Power Unit Installation and Operation Guide Copyright 04 HydroSpin, All rights reserved. The data contained in this document is proprietary to HydroSpin. It is disclosed to the receiving
More informationPRECISION MACHINING & ASSEMBLY COMPANY
COMPANY PROFILE PRECISION MACHINING & ASSEMBLY COMPANY Medmakina as a company that specialized on the precision CNC Machining & Assembly of highreliabilty components for the Aerospace, Defense Industries,
More informationNew Braunfels ISD Career & Technical Education Pathways Alamo Academies
New Braunfels ISD Career & Technical Education Pathways Alamo Academies N ew Braunfels ISD has participated in the Alamo Academies offered through Alamo Colleges for more than 10 years. Students have the
More informationADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY
ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY The work of the Talent Pipeline Task Force was inspired by our community s existing assets in the areas of education and workforce. Members consist
More informationAIRCRAFT SERVICES COMPONENT SERVICES ENGINE SERVICES LINE MAINTENANCE TRAINING SERVICES ENGINE PARTS REPAIR SERVICES
AIRCRAFT COMPONENT ENGINE LINE MAINTENANCE TRAINING ENGINE PARTS REPAIR KEY COMPANY FACTS One of the leading global MRO service providers Over 80 years of experience in engine MRO Around 500 customers
More informationSERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
More informationELECTRICAL & POWER DISTRIBUTION
ELECTRICAL & POWER DISTRIBUTION END-TO-END ELECTRICAL WIRING INTERCONNECTION SYSTEMS (EWIS) Complete EWIS System Design Harness Installation Design Reconciliation of Wiring Diagrams (2D) & Harness Design
More informationDATA REQUIREMENTS DESCRIPTION (DRD)
DATA REQUIREMENTS DESCRIPTION (DRD) 1. DPD NO.: XXX ISSUE: Draft 2. DRD NO.: STD/EDAL 3. DATA TYPE: 3 4. DATE REVISED: 5. PAGE: 1/3 6. TITLE: Engineering Drawings and Associated Lists 7. DESCRIPTION/USE:
More information