August International opportunities and events for students and graduates

Transcription

1 August 2013 International opportunities and events for students and graduates 1

2 Airbus Newsletter August 13 Current open positions for students and graduates This is the new edition of the Airbus Newsletter focusing on career opportunities in Airbus, existing since December Information about open graduate positions and early career entry programmes can be found on our career website at Most roles can be accessed by clicking the Apply Now button except where stated otherwise. The positions listed for Airbus will be visible on the system as long as they are available. Once a position has been filled the reference and job description will disappear, so we encourage you to be proactive in applying. APPRENTICESHIP OPPORTUNITIES IN FRANCE AIRBUS 2013 APPRENTICESHIP CAMPAIGN! Apply Now at 2

3 GRADUATE ROLES Reference Title Start date Location Responsable d unité de Production Manufacturing FAL Toulouse Loads analysis Engineer Getafe Electrical design Engineer Getafe IT/IM specialist ETL buisness intelligence solutions Barajas Electrical & Control Getafe Electrical & Control Getafe Supplier Management Getafe Loads analysis Engineer Getafe Aerodynamics Engineer Getafe Flight Mechanics Engineer Getafe System safety Engineer Getafe WORKING STUDENT Reference Title Start Date Location Werkstudent (m/w) im Bereich Bremen Schwerbehindertenabteilung Werkstudent/in Audits & Surveillance Support Bremen Werkstudent (m/w) im Bereich Einkauf: General Hamburg Procurement Werkstudent (m/w) im Bereich Gesundheit: Medizinischer Hamburg Dienst Werkstudent (m/w) im Bereich ICT Academy: elearning Hamburg Graphic Design Support Werkstudent (m/w) im Bereich Personalwesen: A Hamburg Manufacturing Werkstudent (m/w) im Bereich Personalwesen: Hamburg Human Resources Programmes Werkstudent (m/w) im Bereich HR: Betriebliches Bremen Eingliederungsmanagement Werkstudent (w/m) im Bereich Event- und Bremen Projektmanagement: Induction Werkstudent (w/m) im Bereich Event- und Hamburg Projektmanagement: Induction Werkstudent (m/w) im Airbus Training Center: Support Hamburg Trainingsorganisation Werkstudent (m/w) im Bereich Engineering: Technische Hamburg Leitung Airbus Deutschland für A300/A Working Student (m/w) within Customer Services: Hamburg A350XWB Cabin Upgrade Readiness Werkstudent (w/m) im Bereich Engineering: Bremen Plattform- und Wissensmanagement Werkstudent (m/w) im Bereich Engineering: Akustik und Hamburg Vibration Werkstudent im Bereich Projektmanagement: Hamburg Design Process Architecture Werkstudent (m/w) im Bereich Engineering: Elektrische Hamburg Installation Long Range Working Student (m/f) within Programmes: Operational Support Hamburg 3

4 Airbus Newsletter August 13 INTERNSHIPS Reference Title Start date Location Business law internship Toulouse Contract law internship Toulouse Pressure measurement engineer Toulouse Gap year in HR - HRBP assistant for the A350 Program Toulouse Année de césure RH - gestion de l'intérim Toulouse Internship within the Legal Affairs Department - Aircraft Toulouse Procurement Internship - Litigation & Regulatory Affairs Toulouse Internship in HR - Transnational HRBP Assistant Toulouse Customers affairs communication internship Toulouse Internship in Human Resources - Centre of Competence Toulouse Learning Pressure measurement engineer Toulouse A380 Chief Engineering Mechanical Systems Toulouse Communication Toulouse Reconnaissance graphique Toulouse Santé sécurité Toulouse Internship in finance - merger & acquisition Toulouse InterNatco Toulouse Healt and safety Toulouse Corporate internship - legal counsel trainee Toulouse Internship - expatriate management process improvement Toulouse Stage HR - Assistant HRBP Toulouse Internship - customer services communication tools Toulouse Assistant Lean & Visual Management within Airbus HR Department Toulouse Cabin Retrofit Buyer Toulouse Internship within Airbus Legal Department Toulouse Training analysis Toulouse Safety local support Toulouse ME A350 assembly and systems installations Toulouse Technology watch Toulouse Etude process perçage A400M Toulouse Etude durée de vie outils coupants Toulouse Analyse du process d'industrialisation des pièces et sousensembles Toulouse UP-DEV A/C development schedule template Toulouse Quality Programme Management Toulouse Global Sourcing Support Trainee Toulouse PMO Assistante Toulouse Stage Process - FMEA Toulouse Quality Improvement tools implementing Nantes Stage Qualité A400M - Protection de la pointe avant Toulouse Human Resources Internship within Airbus A320 Program Toulouse Department Internship - HRBP Assistant Toulouse Internship quality Support Getafe 4

5 Internship Offset Barajas E123EGIEN - Practicas FAL NH Albacete Becario control produccion A Getafe Internship health & safety Getafe / Barajas Internship bos design Getafe Internship Environment & Waste Illescas E123TI - Prácticas área de aeronavegabilidad Getafe Internship Servicios Industriales Albacete Internship Illescas Quality Lab Illescas Internship Competence Management Getafe Internship Supplier Compliance Specialist Getafe Internship Mass Properties Getafe Internship Clean Sky Capture Phase support Madrid Internship Control de Producción Getafe Internship Airframe Research & Technology Getafe Internship Materials Procurement Getafe Internship in Information Services Madrid Internship- General Procurement Getafe Internship project management and lean task support Getafe Internship Business Support OED Illescas Illescas Internship-A380 Programme Getafe Internship Methods and Tools Getafe Internship Quality A Getafe Internship Airworthiness Administration Support Getafe Internship-PEGASUS-Acoustic simulation Getafe Internship Universidad Sevilla (Erasmus) Tablada Internship - Procurement Tablada Internship Ingeniería de Producción Puerto real Internship Sheet Metal Management & Automated Cbc Assembly Internship Materials and Processes Engineering Tablada Internship Building and Construction San pablo sur Internship Aerostructures Engineer Tablada internship Supply Chain Tablada Internship Aerostructures Programme Tablada Internship A400M Production Department Tablada Internship Energy Puerto real Internship-Lean in Procurement Tablada Praktikum im Bereich Produktion: Erstellung eines Bremen Leistungskatalogs Praktikum im Bereich Produktion: Maintenance Parts Bremen Manufacturing Praktikum A380 Quality Conformance Hamburg Praktikum in Manufacturing Engineering: Entwicklung Bremen Reportings Praktikum im Bereich Engineerig: Tool- und Hamburg Datenbankentwicklung Praktikum im Bereich Produktionsplanung: Paintshop Hamburg Internship within Human Resources: Talent & Executive Hamburg Development Praktikum im Bereich Berufsausbildung: Hamburg Prozessoptimierung Praktikum im Bereich Endlackierung: Nahinfrarot- Spektroskopie Hamburg 5

6 Airbus Newsletter August Praktikum im Bereich des Kompetenzzentrums für Hamburg Projektmanagement Internship within Central Programme: A380 Programme Hamburg performance Internship within Central Programme: A380 Programme Hamburg performance Praktikum im Bereich Personalwesen: Expatriate Hamburg Management Praktikum im Bereich Weiterbildung: Einführung eines Hamburg Toolmanagements Internship within Manufacturing: Production Efficiency Stade Digital Factory Internship within Project Management: Hamburg A350XWB Cabin & Cargo, Industrial Fuselage Praktikum im Bereich Manufacturing Engineering: Hamburg Projektmanagement Praktikum im Bereich Engineering: Innovation Cell Hamburg Praktikum im Bereich Materialien und Prozesse: Bremen Fire Saftey Engineering & Test Internship within Engineering: Assembly Technology Bremen Praktikum im Bereich Produktion SA & LR Hamburg Praktikum im Bereich Qualität: Stade Unterstützung für Qualität- und Umweltmanagement Praktikum im Bereich Forschung und Entwicklung: Stade Faserverbundbauweise Internship within Engineering: A350 Fuselage Structure Support Hamburg VOLUNTEER INTERNATIONAL EXPERIENCE VIE Reference Title Start Date Location VIE - Project Management Hamburg VIE - ICT Service Management Hamburg VIE - CFD Engineer for Air Systems Design Hamburg VIE - Project Manager for A350 Bremen Fuselage Bremen Engineering Plateau VIE - Validation & Verification and In-Service Issues Hamburg VIE - e-learning Project Support Hamburg VIE - Procurement Operation Forging / Casting Bremen VIE - Coordination of Cost Improvement SA Hamburg VIE Single Aisle Manufacturing Hamburg VIE - Controller Hamburg VIE for Structures Test Engineering Hamburg VIE - CIDS New Development Buxtehude VIE Knowledge Management Assistant Filton VIE supply chain and project management officer Broughton 6

7 FINAL YEAR THESIS Reference Title Start Date Location Final Thesis: Cargo area damage detection Hamburg Abschlussarbeit im Bereich Engineering: Innovation Cell Hamburg 7

8 Airbus Newsletter August 13 Events SPAIN - EADS Polytechnic University of Madrid - UPM (Aeronautical School) Master in COMPOSITES 4th Edition Designed to Postgraduate to complement a previous university training, and to enable to the student in the practical aspects of the design, development and industrialisation of structures in composite Composites Manufacturing Design Analysis This Master mainly is oriented to composite materials for the aerospace industry, although its content is equally applicable to other sectors of the high technology: naval industry, wind energy, railway transport high speed. Who is the master for? The Master focuses on the aerospace industry although the contents and processes are also applicable to other high tech industrial sectors. Due to the growing importance of the wind energy industry, this years' edition offers a specific module on wind turbine blades The course is oriented to graduates in engineering, materials science, physics or chemistry. *Master's Structure - The Master may be completed in 1 year - The Master is organized in Modules that last from 2 to 4 weeks - Each Module is divided into several lectures taught intensively Monday thru Thursday in the afternoon (17:00 to 21:00) - Lectures will be given mostly in English - Handouts and other course materials are written in English 8

9 *Internship During the master courses the students will have an internship experience at the company in a Composite area (7h/day, in the morning). Working time: 7h/day Grant: 875 /month *Master Thesis To be done after the lectures completion. Agreements have been reached with EADS and other industries and research centres, to do the Thesis at their facilities. Acceptance is done by the industry on a case by case basis. *Modules Modules are taught sequentially, the exact dates can be found at our website: - Constituents materials: Fibre, matrices, prepregs, cores - Manufacture of Polymer Matrix Composites - Design of Composite structures - Analysis of Composites structures - Simulation techniques and Virtual testing - Health and environment issues. Green composites - Certification of composite aerostructures - In-service behaviour - Production management. Lean manufacturing - Project management - Smart Composites - Non conventional composites CMC, MMC - Nanocomposites - Concurrent engineering - Special considerations for Composites in Space applications - Design and manufacturing of Wind Turbine blades *Fees Total fees for the Master are *Entry requirements - A degree in engineering, technical engineering, chemistry or physics - High level of English - Spanish, French and/or German will be taken into considerati Information: Prof. Alfredo Güemes E.T.S.I. Aeronáuticos alfredo.guemes@upm.es 9

10 Airbus Newsletter August 13 Organization Organising Institution School of Engineering- University of Seville (Spain). Purpose To give the participants a general knowledge of the related fields within the aeronautical industry organization, business model and supply chain. To train the participants in general knowledge within the production of systems, materials and components for aircraft manufacturing and manufacturing and assembly processes involved in aeronautical production. Number of Credits 80 ECTS Requirements For Admission Engineer Master s degrees in Engineering: (Aeronautical, Industrial, Industrial Management, Telecommunications, Naval, Civil). High level of English and medium-high level of Spanish. Completed find year thesis. Dates Pre-selection: July - September 2013 Enrolment: 1-20 October 2013 Course: 14 November October 2014 More Information: e.mail gscaio@us.es / Phone number (Monday to Friday from 9 to 14h). How to Apply Send the following information to: master.gsc&aio@military.airbus.com CV in English. Academics Records. ID or Passport number. Professional and International experience. Other merits. 10

11 Contents Module 1. INTRODUCTION. OVERVIEW OF AERONAUTICAL INDUSTRY (1 ECTS) Master Introduction/ Aeronautical environment / Business Model / Legal affairs and Human Resources in the Aerospace Industry. Module 2. MATERIALS, AIRCRAFT COMPONENTS AND AIRCRAFT SYSTEMS (3 ECTS) Composite Materials in Aircraft Manufacturing / Metal Materials in Aircraft Manufacturing / Aircraft Systems Integration / Aircraft Structures. Module 3. PRODUCTION MANAGEMENT AND PLANNING (4 ECTS) Introduction / Planning / Facilities Management / Logistics / Production Planning and Controlling / FAL Planning and Controlling. Module 4. MANUFACTURING PROCESSES AND OPERATIONS (3 ECTS) Material Removal Processes / Metal Forming Processes / Manufacturing of Composite Parts / Wire Harness Manufacturing and Assembly / Manufacturing Technologies I & II. Module 5. QUALITY (3 ECTS) Introduction to Quality / Quality management / Regulations and Certification / Company Quality Systems / Quality in Final Assembly Line (FAL) / Quality in Aero Structures Assembly / Quality in Supply Chain Management. Module 6. LEAN (2 ECTS) Introduction to Lean Production / Lean in Parts Manufacturing / Lean in Aero Structures Assembly / Module 7. ASSEMBLY OF AEROSTRUCTURES (2 ECTS) Joining Processes / Aero structures Assembly Engineering / Aero Structures Assembly Production: Planning and Controlling / Aero Structures Assembly Production: Production Organization / Maintenance. Module 8. ENGINEERING (2 ECTS) Product Lifecycle Management (PLM) / Product Structure / Industrialization, Support / PLM Tools / Ground Test System / Industrial Innovation. Module 9. SKILLS (3 ECTS) Effective Communication / Presentations & Meetings / Team Building / Negotiation. Module 10. SUPPLY CHAIN MANAGEMENT (3 ECTS) Introduction to the Global Supply Chain / Global Supply Chain I / Global Supply Chain II / Practical Overview. Module 11. FINAL ASSEMBLY LINE (FAL) (2 ECTS) Manufacturing and Production / Manufacturing Engineering and Industrialization / FAL Logistics / Facilities / Tooling Facilities / Ground Test System. Module 12: TRAINING PRACTICE (44 ECTS) Training practice at AIRBUS MILITARY facilities (paid practice). Module 13: MASTER THESIS (8 ECTS) FOLLOW US ONLINE 11