HCF4081B QUAD 2 INPUT AND GATE

Size: px
Start display at page:

Download "HCF4081B QUAD 2 INPUT AND GATE"

Transcription

1 QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25 C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B " STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEICES" DESCRIPTION The HCF4081B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4081B QUAD 2 INPUT AND GATE provide the system designer with direct DIP ORDER CODES SOP PACKAGE TUBE T & R DIP HCF4081BEY SOP HCF4081BM1 HCF4081M013TR implementation of the AND function and supplement the existing family of CMOS gates. PIN CONNECTION September /7

2 INPUT EQUIALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 1, 5, 8, 12 A, C, E, G Data Inputs 2, 6, 9, 13 B, D, F, H Data Inputs 3, 4, 10, 11 J, K, L, M Data Outputs 7 SS Negative Supply 14 DD Positive Supply TRUTH TABLE INPUTS OUTPUTS A, C, E, G B, D, F, H J, K, L, M L L L L H L H L L H H H ABSOLUTE MAXIMUM RATINGS Symbol Parameter alue Unit DD Supply -0.5 to +22 I DC Input -0.5 to DD I I DC Input Current ± 10 ma P D Power Dissipation per Package 200 mw Power Dissipation per Output Transistor 100 mw T op Operating Temperature -55 to +125 C T stg Storage Temperature -65 to +150 C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to SS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol Parameter alue Unit DD Supply 3 to 20 I Input 0 to DD T op Operating Temperature -55 to 125 C 2/7

3 DC SPECIFICATIONS Test Condition alue Symbol Parameter I () O () I O (µa) DD () T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. Unit I L Quiescent Current 0/ / / / OH High Level Output 0/5 < /10 < /15 < OL IH IL I OH I OL Low Level Output High Level Input Low Level Input Output Drive Current Output Sink Current 5/0 < /0 < /0 < /4.5 < /9 < /13.5 < /0.5 < /1 < /1.5 < /5 2.5 < /5 4.6 < / < / < /5 0.4 < / < / < I I Input Leakage 0/18 Any Input 18 Current ±10-5 ±0.1 ±1 ±1 µa C I Input Capacitance Any Input pf The Noise Margin for both "1" and "0" level is: 1 min. with DD =5, 2 min. with DD =10, 2.5 min. with DD =15 DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25 C, C L = 50pF, R L = 200KΩ, t r = t f = 20 ns) µa ma ma Symbol Parameter Test Condition alue (*) Unit DD () Min. Typ. Max. t PLH t PHL Propagation Delay Time t TLH t THL Output Transition Time (*) Typical temperature coefficient for all DD value is 0.3 %/ C. ns ns 3/7

4 TEST CIRCUIT C L = 50pF or equivalent (includes jig and probe capacitance) R L = 200KΩ R T = Z OUT of pulse generator (typically 50Ω) WAEFORM : PROPAGATION DELAY TIMES (f=1mhz; 50% duty cycle) 4/7

5 Plastic DIP-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. a B b b D E e e F I L Z P001A 5/7

6 SO-14 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A a a b b C c1 45 (typ.) D E e e F G L M S 8 (max.) PO13G 6/7

7 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom 7/7

HCF4070B QUAD EXCLUSIVE OR GATE

HCF4070B QUAD EXCLUSIVE OR GATE QUAD EXCLUSIE OR GATE MEDIUM-SPEED OPERATION t PHL = t PLH = 70ns (Typ.) at CL = 50 pf and DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA

More information

HCF4001B QUAD 2-INPUT NOR GATE

HCF4001B QUAD 2-INPUT NOR GATE QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE

More information

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS DECADE COUNTER WITH 10 DECODED OUTPUTS MEDIUM SPEED OPERATION : 10 MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)

HCF4010B HEX BUFFER/CONVERTER (NON INVERTING) HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT

More information

HCF4028B BCD TO DECIMAL DECODER

HCF4028B BCD TO DECIMAL DECODER BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION

More information

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER "HIGH" OR "LOW" MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate

More information

M74HC4078TTR 8-INPUT NOR/OR GATE

M74HC4078TTR 8-INPUT NOR/OR GATE 8-INPUT NOR/OR GATE HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:

More information

HCF40181B 4-BIT ARITHMETIC LOGIC UNIT

HCF40181B 4-BIT ARITHMETIC LOGIC UNIT 4-BIT ARITHMETIC LOGIC UNIT FULL LOOK-AHEAD CARRY FOR SPEED OPERATIONS ON LONG WORDS GENERATES 16 LOGIC FUNCTIONS OF TWO BOOLEAN VARIABLES GENERATES 16 ARITHMETIC FUNCTIONS OF TWO 4-BIT BINARY WORDS A

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) SYNCHRONOUS PROGRAMMABLE 4-BIT BINARY COUNTER WITH ASYNCHRONOUS CLEAR INTERNAL LOOK-AHEAD FOR FAST COUNTING CARRY OUTPUT FOR CASCADING SYNCHRONOUSLY PROGRAMMABLE LOW-POWER TTL COMPATIBILITY STANDARDIZED

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED : f MAX = 48MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC =2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V

More information

HCC/HCF4032B HCC/HCF4038B

HCC/HCF4032B HCC/HCF4038B HCC/HCF4032B HCC/HCF4038B TRIPLE SERIAL ADDERS INERT INPUTS ON ALL ADDERS FOR SUM COMPLEMENTING APPLICATIONS FULLY STATIC OPERATION...DC TO 10MHz (typ.) @ DD = 10 BUFFERED INPUTS AND OUTPUTS SINGLE-PHASE

More information

Description. Order code Temperature range Package Packing Marking

Description. Order code Temperature range Package Packing Marking Dual D-type flip-flop PDIP14 SO14 Applications Automotive Industrial Computer Consumer Datasheet - production data Features Description Set-reset capability Static flip-flop operation - retains state indefinitely

More information

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking 14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully

More information

HCC/HCF4027B DUAL-J-K MASTER-SLAVE FLIP-FLOP

HCC/HCF4027B DUAL-J-K MASTER-SLAVE FLIP-FLOP DUAL-J-K MASTER-SLAVE FLIP-FLOP. SET-RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINITELY WITH CLOCK LEVEL EITHER HIGH OR LOW MEDIUM SPEED OPERATION - 16MHz (typ. clock toggle rate

More information

. MEDIUM SPEED OPERATION - 8MHz (typ.) @ . MULTI-PACKAGE PARALLEL CLOCKING FOR HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE

. MEDIUM SPEED OPERATION - 8MHz (typ.) @ . MULTI-PACKAGE PARALLEL CLOCKING FOR HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE HCC4029B HCF4029B PRESETTABLE UP/DOWN COUNTER BINARY OR BCD DECADE. MEDIUM SPEED OPERATION - 8MHz (typ.) @ CL = 50pF AND DD-SS = 10. MULTI-PACKAGE PARALLEL CLOCKING FOR SYNCHRONOUS HIGH SPEED OUTPUT RES-

More information

.LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M74HC154 4 TO 16 LINE DECODER/DEMULTIPLEXER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V

.LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M74HC154 4 TO 16 LINE DECODER/DEMULTIPLEXER. HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V . HIGH SPEED tpd = 15 ns (TYP.) at VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) at T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE

More information

HCC4541B HCF4541B PROGRAMMABLE TIMER

HCC4541B HCF4541B PROGRAMMABLE TIMER HCC4541B HCF4541B PROGRAMMABLE TIMER 16 STAGE BINARI COUNTER LOW SYMMETRICAL OUTPUT RESISTANCE, TYPICALLY 100 OHM AT DD = 15 OSCILLATOR FREQUENCY RANGE : DC TO 100kHz AUTO OR MASTER RESET DISABLES OSCIL-

More information

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER REVERSE LEAKAGE CURRENT LESS THAN 10 µa THREE TERMINAL FIXED VERSION (13.7V) OUTPUT CURRENT IN EXCESS OF 1.5A AVAILABLE IN ± 1% (AC) SELECTION AT 25 C TYPICAL

More information

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE PROTECTION

More information

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated

More information

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC

More information

CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches

CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches General Description The CD4043BC are quad cross-couple 3-STATE CMOS NOR latches, and the CD4044BC are quad cross-couple 3- STATE

More information

. LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION

. LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION TDA2822M DUAL LOW-VOLTAGE POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 1.8V. LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822M is a monolithic integrated

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 2N2219A 2N2222A DESCRIPTION The 2N2219A and 2N2222A are silicon Planar Epitaxial NPN transistors in Jedec TO-39 (for 2N2219A) and in Jedec TO-18 (for 2N2222A) metal case. They are designed for high speed

More information

ULN2801A, ULN2802A, ULN2803A, ULN2804A

ULN2801A, ULN2802A, ULN2803A, ULN2804A ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral

More information

. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .COMPATIBLE WITH TTL OUTPUTS M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. tpd = 9 ns (TYP. M54HCT27 M74HCT27 TRIPLE 3-INPUT NOR GATE. HIGH SPEED tpd = 9 ns (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =1µA (MAX.) AT T A =25 C.COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) OUTPUT

More information

MM74HC14 Hex Inverting Schmitt Trigger

MM74HC14 Hex Inverting Schmitt Trigger MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as

More information

LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER

LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% EXCELLENT FREQUENCY STABILITY ESD PROTECTION 2kV DESCRIPTION

More information

. HIGH SPEED .LOW POWER DISSIPATION M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK

. HIGH SPEED .LOW POWER DISSIPATION M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK M54HCT240/241/244PU M74HCT240/241/244PU OCTAL BUS BUFFERS WITH PULL-UP INPUT NETWORK. HIGH SPEED t PD = 14 ns (TYP.) at V CC =5V.LOW POWER DISSIPATION I CCH = 200 µa (TYP.) at T A =25 o C.COMPATIBLE. WITH

More information

.OPERATING SUPPLY VOLTAGE UP TO 46 V

.OPERATING SUPPLY VOLTAGE UP TO 46 V L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)

More information

TL074 TL074A - TL074B

TL074 TL074A - TL074B A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION

More information

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated circuits cotructed

More information

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS. OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY

L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS. OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY. HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE

More information

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16 8-bit SIPO shift latch register (3-state) SO16 TSSOP16 Applicatio Automotive Industrial Computer Coumer Datasheet - production data Features High speed: f MAX = 80 MHz (typ.) at V CC = 6 V Low power dissipation:

More information

TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION

TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION TDA2822 DUAL POER AMPLIFIER SUPPLY VOLTAGE DON TO 3 V. LO CROSSOVER DISTORSION LO QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip,

More information

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V

More information

ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs

More information

ADJUSTABLE VOLTAGE AND CURRENT REGULATOR

ADJUSTABLE VOLTAGE AND CURRENT REGULATOR L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. fmax = 71 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. fmax = 71 MHz (TYP. M54HC74 M74HC74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR. HIGH SPEED fmax = 71 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =2µA (MAX.) AT T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.)

More information

Order code Temperature range Package Packaging

Order code Temperature range Package Packaging ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance

More information

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V

Symbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V BUZ71A N - CHANNEL 50V - 0.1Ω - 13A TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ71A 50 V < 0.12 Ω 13 A TYPICAL RDS(on) = 0.1 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT

More information

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652 M74HCT651 M74HCT652 HCT651 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE, INV.) HCT652 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE). HIGH SPEED fmax = 60 MHz (TYP.) AT VCC =5V.COMPATIBLE WITH TTL OUTPUTS V IH =

More information

L293D L293DD PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES. 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)

L293D L293DD PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES. 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive) 293D 293DD PUS-PU FOUR CANNE DRIVER WIT DIODES 600mA OUTPUT CURRENT CAPABIITY PER CANNE 1.2A PEAK OUTPUT CURRENT (non repetitive) PER CANNE ENABE FACIITY OVERTEMPERATURE PROTECTION OGICA "0" INPUT VOTAGE

More information

BUX48/48A BUV48A/V48AFI

BUX48/48A BUV48A/V48AFI BUX48/48A BU48A/48AFI HIGH POWER NPN SILICON TRANSISTORS STMicroelectronics PREFERRED SALESTYPES NPN TRANSISTOR HIGH OLTAGE CAPABILITY HIGH CURRENT CAPABILITY FAST SWITCHING SPEED APPLICATIONS SWITCH MODE

More information

L2293Q. Push-pull four channel driver with diodes. Features. Description

L2293Q. Push-pull four channel driver with diodes. Features. Description Push-pull four channel driver with diodes Features 600 ma output current capability per channel 1.2 A peak output current (non repetitive) per channel Enable facility Overtemperature protection Logical

More information

TL084 TL084A - TL084B

TL084 TL084A - TL084B A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE

More information

CD4013BC Dual D-Type Flip-Flop

CD4013BC Dual D-Type Flip-Flop CD4013BC Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors.

More information

Description. Table 1. Device summary. Order codes Temperature range Package Packaging

Description. Table 1. Device summary. Order codes Temperature range Package Packaging Features DIP-8 ESD protection ±15 kv human body model ±8 kv IEC 1000-4-2 contact discharge Operates from a single 3.3 V supply - no charge pump required Interoperable with 5 V logic 1 µa low current shutdown

More information

Application Examples: MICROPROCESSOR DISPLAYS INDUSTRIAL CONTROL INDICATOR RELAY DRIVER INSTRUMENTATION READOUTS PLCC44 (Plastic Chip Carrier)

Application Examples: MICROPROCESSOR DISPLAYS INDUSTRIAL CONTROL INDICATOR RELAY DRIVER INSTRUMENTATION READOUTS PLCC44 (Plastic Chip Carrier) M5450 M5451 LED DISPLAY DRIVERS FEATURES SUMMARY M5450 34 OUTPUTS/15mA SINK M5451 35 OUTPUTS/15mA SINK CURRENT GENERATOR OUTPUTS (NO EXTERNAL RESISTORS REQUIRED) CONTINUOUS BRIGHTNESS CONTROL SERIAL DATA

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. fmax = 67 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. fmax = 67 MHz (TYP. M54HC112 M74HC112 DUAL J-K FLIP FLOP WITH PRESET AND CLEAR. HIGH SPEED fmax = 67 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =2µAATT A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.) OUTPUT DRIVE

More information

L4940 series VERY LOW DROP 1.5 A REGULATORS

L4940 series VERY LOW DROP 1.5 A REGULATORS L4940 series VERY LOW DROP 1.5 A REGULATORS PRECISE 5 V, 8.5 V, 10 V, 12 V OUTPUTS LOW DROPOUT VOLTAGE (500 typ at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY

More information

Symbol Parameter Value Unit V i-o Input-output Differential Voltage 40 V I O Output Current Intenrally Limited Top

Symbol Parameter Value Unit V i-o Input-output Differential Voltage 40 V I O Output Current Intenrally Limited Top LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS

More information

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at Is Now Part of To learn more about ON Semiconductor, please visit our website at www.oemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba

More information

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

DM74LS151 1-of-8 Line Data Selector/Multiplexer

DM74LS151 1-of-8 Line Data Selector/Multiplexer 1-of-8 Line Data Selector/Multiplexer General Description This data selector/multiplexer contains full on-chip decoding to select the desired data source. The DM74LS151 selects one-of-eight data sources.

More information

TIP31C. Power transistors. General features. Applications. Description. Internal schematic diagram. Order codes

TIP31C. Power transistors. General features. Applications. Description. Internal schematic diagram. Order codes Power transistors General features New enhanced series High switching speed h FE improved linearity h FE Grouping Applications Linear and switching industrial application TO-220 1 2 3 Description The TIP31C

More information

TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS

TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions

More information

MM74HC273 Octal D-Type Flip-Flops with Clear

MM74HC273 Octal D-Type Flip-Flops with Clear MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise

More information

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz

More information

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal

More information

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset October 1987 Revised March 2002 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits

More information

STGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT

STGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT Table 1: General Features STGW40NC60V 600 V < 2.5 V 50 A HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION UP TO 50 KHz LOSSES INCLUDE DIODE RECOVERY

More information

HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate

HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise

More information

STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET

STW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY

More information

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30 INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption

More information

BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors

BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with

More information

TIP41C TIP42C. Complementary power transistors. Features. Applications. Description

TIP41C TIP42C. Complementary power transistors. Features. Applications. Description TIP41C TIP42C Complementary power transistors Features Complementary PNP-NPN devices New enhanced series High switching speed h FE grouping h FE improved linearity Applications General purpose circuits

More information

BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor

BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with

More information

STP03D kv NPN Darlington transistor. Features. Application. Description (2, TAB) B (1) E (3)

STP03D kv NPN Darlington transistor. Features. Application. Description (2, TAB) B (1) E (3) 2 kv NPN Darlington transistor Features Extra high voltage capability High gain characteristic TAB Application Active start-up network in 3 phase S.M.P.S. (see application note AN2454) Description The

More information

SG3524 REGULATING PULSE WIDTH MODULATORS

SG3524 REGULATING PULSE WIDTH MODULATORS SG3524 REGULATING PULSE WIDTH MODULATORS COMPLETE PWM POWER CONTROL CIR- CUITRY UNCOMMITTED OUTPUTS FOR SINGLE- ENDED OR PUSH PULL APPLICATIONS LOW STANDBY CURRENT 8mA TYPICAL OPERATION UP TO 300KHz 1%

More information

MM74HC174 Hex D-Type Flip-Flops with Clear

MM74HC174 Hex D-Type Flip-Flops with Clear Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,

More information

L297 STEPPER MOTOR CONTROLLERS

L297 STEPPER MOTOR CONTROLLERS L297 STEPPER MOTOR CONTROLLERS NORMAL/WAVE DRIVE HALF/FULL STEP MODES CLOCKWISE/ANTICLOCKWISE DIRECTION SWITCHMODE LOAD CURRENT REGULA- TION PROGRAMMABLE LOAD CURRENT FEW EXTERNAL COMPONENTS RESET INPUT

More information

CD4094BC 8-Bit Shift Register/Latch with 3-STATE Outputs

CD4094BC 8-Bit Shift Register/Latch with 3-STATE Outputs 8-Bit Shift Register/Latch with 3-STATE Outputs General Description The CD4094BC consists of an 8-bit shift register and a 3-STATE 8-bit latch. Data is shifted serially through the shift register on the

More information

CD4042BM CD4042BC Quad Clocked D Latch

CD4042BM CD4042BC Quad Clocked D Latch CD4042BM CD4042BC Quad Clocked D Latch General Description The CD4042BM CD4042BC quad clocked D latch is a monolithic complementary MOS (CMOS) integrated circuit constructed with P- and N-channel enhancement

More information

STW20NM50 N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET

STW20NM50 N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET TYPE V DSS (@Tjmax) R DS(on) I D STW20NM50 550V < 0.25Ω 20 A TYPICAL R DS (on) = 0.20Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED

More information

ESDAxxL DUAL TRANSIL ARRAY FOR ESD PROTECTION

ESDAxxL DUAL TRANSIL ARRAY FOR ESD PROTECTION Application Specific Discretes A.S.D. ESDAxxL DUAL TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : - COMPUTERS - PRINTERS

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) High power NPN epitaxial planar bipolar transistor Preliminary data Features High breakdown voltage V CEO = 230 V Typical f T = 30 MHz Application Audio power amplifier Description This device is a NPN

More information

Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive

Symbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive BUZ11 N - CHANNEL 50V - 0.03Ω - 30A -TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 30 A TYPICAL R DS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT

More information

L4959 MULTIFUNCTION VOLTAGE REGULATOR FOR HOME AUDIO

L4959 MULTIFUNCTION VOLTAGE REGULATOR FOR HOME AUDIO L4959 MULTIFUNCTION VOLTAGE FOR HOME AUDIO 4 OUTPUTS: 12V (1.3A); 12V (0.8A); 8.6V (0.6A); 5.6V (0.25A) STANDBY OUT1 12V(a), OUT2 12V(b) AND OUT3 8.6V WITH INDEPENDENT ENABLE CONTROL FOR STAND-BY MODE

More information

BTB04-600SL STANDARD 4A TRIAC MAIN FEATURES

BTB04-600SL STANDARD 4A TRIAC MAIN FEATURES BTB-6SL STANDARD A TRIAC MAIN FEATURES A Symbol Value Unit I T(RMS) A V DRM /V RRM 6 V I GT(Q) ma G A A DESCRIPTION The BTB-6SL quadrants TRIAC is intended for general purpose applications where high surge

More information

AVS10 AUTOMATIC VOLTAGE SWITCH (SMPS < 300W) VSS. Mode. Osc / In

AVS10 AUTOMATIC VOLTAGE SWITCH (SMPS < 300W) VSS. Mode. Osc / In AVS10 AUTOMATIC VOLTAGE SWITCH (SMPS < 300W) CONTROLLER 50/60Hz FULL COMPATIBILITY INTEGRATED VOLTAGE REGULATOR TRIGGERING PULSE TRAIN OF THE TRIAC PARASITIC FILTER LOW POWER CONSUMPTION A2 TRIAC HIGH

More information

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking

Description. Table 1. Device summary. Order code Temperature range Package Packing Marking 8-bit shift register with output latches (3-state) Applicatio Datasheet - production data SO16 TSSOP16 Automotive Industrial Computer Coumer Features High speed: f MAX = 59 MHz (typ.) at V CC = 6 V Low

More information

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits Each circuit functions as a 2-input NAND gate with Schmitt-trigger action on

More information

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition

More information

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop Hex D-Type Flip-Flop Quad D-Type Flip-Flop General Description The CD40174BC consists of six positive-edge triggered D- type flip-flops; the true outputs from each flip-flop are externally available. The

More information

DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers

DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers September 1986 Revised April 2000 DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full

More information

L78M00 SERIES POSITIVE VOLTAGE REGULATORS. www.tvsat.com.pl

L78M00 SERIES POSITIVE VOLTAGE REGULATORS. www.tvsat.com.pl SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT TO 0.5A OUTPUT VOLTAGES OF 5; 6; 8; 9; 10; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSISTOR SOA PROTECTION DESCRIPTION

More information

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines

More information

2SD882. NPN medium power transistor. Features. Applications. Description. High current Low saturation voltage Complement to 2SB772

2SD882. NPN medium power transistor. Features. Applications. Description. High current Low saturation voltage Complement to 2SB772 NPN medium power transistor Features High current Low saturation Complement to 2SB772 Applications Voltage regulation Relay driver Generic switch Audio power amplifier DC-DC converter Description The device

More information

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. fmax = 48 MHz (TYP.

. HIGH SPEED .LOW POWER DISSIPATION .HIGH NOISE IMMUNITY M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. fmax = 48 MHz (TYP. M54/M74HC190 M54/M74HC191 4 BIT SYNCHRONOUS UP/DOWN COUNTERS. HIGH SPEED fmax = 48 MHz (TYP.) AT VCC =5V.LOW POWER DISSIPATION I CC =4µA (MAX.) AT T A =25 C.HIGH NOISE IMMUNITY VNIH =VNIL =28%VCC (MIN.)

More information

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved

More information

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)

More information

BD135 - BD136 BD139 - BD140

BD135 - BD136 BD139 - BD140 BD135 - BD136 BD139 - BD140 Complementary low voltage transistor Features Products are pre-selected in DC current gain Application General purpose Description These epitaxial planar transistors are mounted

More information

DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers

DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four out-put gates.

More information

STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET

STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP10NK60Z STP10NK60ZFP STB10NK60Z STB10NK60Z-1

More information

SWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION

SWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION SWITCH-MODE POWER SUPPLY CONTROLLER. LOW START-UP CURRENT. DIRECT CONTROL OF SWITCHING TRAN- SISTOR. COLLECTOR CURRENT PROPORTIONAL TO BASE-CURRENT INPUT REERSE-GOING LINEAR OERLOAD CHARACTERISTIC CURE

More information

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides

More information

STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET

STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP6NK60Z STP6NK60ZFP STB6NK60Z

More information