Technical Guarantees No. ODT_ /0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating
|
|
|
- Marcia York
- 7 years ago
- Views:
Transcription
1 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards DIN Type 3 phase oilimmersed with Conservator 5 Continuous Maximum Rating (C.M.R) KVA Rated Frequency Hz 50 7 Cooling method ONAN Normal Voltage Between Phases at No Load 8 a) H.V Volts b) L.V Volts 400 Connection and Vector Group 9 a) H.V Winding Delta b) L.V Winding Star c) Vector Group Dyn11 Tapping Range on H.V Side 10 a) Plus b) Minus NoS x % NoS x % 1x2.5% 3x2.5% c) Type of Tap Changer Off Load Studies and Documentation Branch 1/4
2 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Losses (Low Losses Type) 11 a) No load losses Watts 425 b) Load losses Watts Max. Impedance Voltage of Short Circuit at 75 o C Voltage Drop at Full Load a) at unity Power Factor (Cosφ = 1) b) at 0.8 Power Factor ((Cosφ = 0.8)) Efficiency at full load a)at unity Power Factor (Cosφ = 1) b)at 0.8 Power Factor ((Cosφ = 0.8)) Max Temperature rise at C.M.R % 4 % 1.37 % 3.33 % % a) Top Oil by Thermometer b) Average Winding by Resistance c) Hot Spot Corresponding to (b ) o C 55 o C 60 o C Insulating Voltage Level a) Rated lighting Impulse with Stand Voltage 1.2/50 μs (Peak Value) b) Rated Duration Power Frequency with Stand Voltage 1 min (r.m.s Value ) kv 125 kv 50 Studies and Documentation Branch 2/4
3 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Winding Conductor Material 17 a) H.V winding Copper b) L.V winding Copper Type of insulation 18 a) H.V winding b) L.V winding Type of Bushing 19 a) H.V 30 NF -250 b) L.V DT Installation (Indoor or Outdoor) Oudoor 21 Noise Level at a Distance of 3 Meters db 55 Transformer Oil (as Standard IEC60296&IEC60422) a) Kinematic Viscosity, at 40 o C mm 2 /s 11 b) Density kg/dm c) Breaking Voltage before Treatment KV 30 d) Breaking Voltage After Treatment KV >60 e) Type Nytro 10 GBXT f) Oil weight Kg 23 Total weight Kg Studies and Documentation Branch 3/4
4 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Overall Dimensions a) Length mm 24 b) Width mm c) Height mm d) Space Between U - Bases mm Accessories a) - Expansion vessel (Conservator ) Required b) Oil Filling Opening Required c) Oil Drain Valve Required d) Grounding Terminals Required e) Diagram and Name Plate Required 25 f) Thermometer Pocket Required g) Oil Level Indicator Required h) Lifting lugs Required i) Safety Valve (over Pressure Relief Device) Required j) U - Base Required k) Dehydrating breather (silicagill breather) Required Tenderer s Signature :.. Date: Studies and Documentation Branch 4/4
5
6
7
8 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. WP_85 Wooden Pole 8.5 m Long Top Diameter mm Impregnated No Description Unit Requirements Offered Data 1 Name of Manufacturer 2 Country of Origin Notes, Remarks, Ref to Documentation Evaluation Committee Comments 3 Standard BS144, BS913, BS1990:Part1, BS Height m Upper diameter (Min.-Max.) mm Min. Diameter at 1.5m from butt mm Species of timber Pine 8 Full Botanical Name Pinus Sylvestris 9 Pole Shape Generally Round, Free from Short Crooks, Top of the Pole shall be cut at an angle not less than 30º For Unstayed Poles : Ultimate Breaking Load at 0.6 m from top of pole Where Stay are Used : Average ultimate fibre stress Poles Impregnated with Creosote By Rueping Process KN 8.2 KN 77.8 Yes/No 12 If Yes : Creosote Detained in Wood kg/m3 115 (min) Preserved Life Cycle of Wood year Studies and Documentation Branch 1/2
9 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. WP_85 Wooden Pole 8.5 m Long Top Diameter mm Impregnated No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Poles Impregnated with Mixed Preparatus Yes/No 13 If Yes : Chemical Formula of Preparatus Net Dry Salt Amount in Pole Perserved Life Cycle of Wood kg/m3 year Relevant Reports and References 14 Type of Testes Sample and Routine Tests 15 Marking Required 16 Marking Plate Material Aluminium 17 Wooden Poles Marking Drawing Drawing No. WP_85 Tenderer s Signature :.. Date: Studies and Documentation Branch 2/2
10 THE MARKING OF THE WOOD POLES The wood poles shall be marked firmly by aluminium labels, which will contain the following information: - Type of the tree - Length (m) - Top diameter (cm) - Impregnation material - Impregnation year - The Abbreviation of the Firm Such marked aluminium plackets shall be nailed at 4 meter high measured from the base of the Pole.
11 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. WP_14 Wooden Pole 14 m Long Top Diameter mm Impregnated No Description Unit Requirements Offered Data 1 Name of Manufacturer 2 Country of Origin Notes, Remarks, Ref to Documentation Evaluation Committee Comments 3 Standard BS144, BS913, BS1990:Part1, BS Height m 14 5 Upper diameter (Min.-Max.) mm Min. Diameter at 1.5m from butt mm Species of timber Pine 8 Full Botanical Name Pinus Sylvestris 9 Pole Shape Generally Round, Free from Short Crooks, Top of the Pole shall be cut at an angle not less than 30º For Unstayed Poles : Ultimate Breaking Load at 0.6 m from top of pole Where Stay are Used : Average ultimate fibre stress Poles Impregnated with Creosote By Rueping Process KN 11 KN 44.4 Yes/No 12 If Yes : Creosote Detained in Wood kg/m3 115 (min) Preserved Life Cycle of Wood year Studies and Documentation Branch 1/2
12 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. WP_14 Wooden Pole 14 m Long Top Diameter mm Impregnated No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Poles Impregnated with Mixed Preparatus Yes/No 13 If Yes : Chemical Formula of Preparatus Net Dry Salt Amount in Pole Perserved Life Cycle of Wood kg/m3 year Relevant Reports and References 14 Type of Testes Sample and Routine Tests 15 Marking Required 16 Marking Plate Material Aluminium 17 Wooden Poles Marking Drawing Drawing No. WP_14 Tenderer s Signature :.. Date: Studies and Documentation Branch 2/2
13 THE MARKING OF THE WOOD POLES The wood poles shall be marked firmly by aluminium labels, which will contain the following information: - Type of the tree - Length (m) - Top diameter (cm) - Impregnation material - Impregnation year - The Abbreviation of the Firm Such marked aluminium plackets shall be nailed at 4 meter high measured from the base of the Pole.
14
15 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. TH_W20 ABC Tension & Suspension Twisted Hook For Wooden Pole through Bolt Pigtail Type M20X240 With Nut 3/4" No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards 4 Material 5 Construction Hot Galvanized Steel Nut and Washer and Fixed Washer 6 Total Length mm Hook Diameter inch 3/4" (20mm) 8 Nut Failing Load KN 24 9 Dimensions As Drawing 10 Attached Drawing Drawing No TH_W20 Tenderer s Signature :.. Date: Studies and Documentation Branch 1/1
16
17 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. TH_S20 ABC Tension & Suspension Hot Galvanized Steel Pole Thread Hook M20 Twisted ( 3/4") No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards 4 Material 5 Construction Hot Galvanized Steel Nut and Washer and Fixed Washer 6 Total Length mm Hook Diameter inch 3/4" (20mm) 8 Nut Failing Load KN 24 9 Dimensions As Drawing 10 Attached Drawing Drawing No TH_S20 Tenderer s Signature :.. Date: Studies and Documentation Branch 1/1
18
19 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. SCG_200 Hot Galvanized Steel Cable Guard No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Description Cable Guard 4 Material Hot Dip Galvanized 5 Steel Guard with Steel Cover Required 6 Steel Guard and Steel Cover Length mm Steel Guard Wedth mm Steel Cover Width mm Steel Guard Edge Hight mm Cover Edge Hight mm Steel Guard and Steel Cover Thickness mm Attached Drawing Drawing No. SCG_200 Tenderer s Signature :.. Date: Studies and Documentation Branch 1/1
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards DIN Type 3 phase oilimmersed with Conservator 5 Continuous Maximum Rating (C.M.R) KVA Rated Frequency Hz 50 7 Cooling method ONAN Normal Voltage Between Phases at No Load 8 a) H.V Volts b) L.V Volts 400 Connection and Vector Group 9 a) H.V Winding Delta b) L.V Winding Star c) Vector Group Dyn11 Tapping Range on H.V Side 10 a) Plus b) Minus NoS x % NoS x % 1x2.5% 3x2.5% c) Type of Tap Changer Off Load Studies and Documentation Branch 1/4
92 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Losses (Low Losses Type) 11 a) No load losses Watts 425 b) Load losses Watts Max. Impedance Voltage of Short Circuit at 75 o C Voltage Drop at Full Load a) at unity Power Factor (Cosφ = 1) b) at 0.8 Power Factor ((Cosφ = 0.8)) Efficiency at full load a)at unity Power Factor (Cosφ = 1) b)at 0.8 Power Factor ((Cosφ = 0.8)) Max Temperature rise at C.M.R % 4 % 1.37 % 3.33 % % a) Top Oil by Thermometer b) Average Winding by Resistance c) Hot Spot Corresponding to (b ) o C 55 o C 60 o C Insulating Voltage Level a) Rated lighting Impulse with Stand Voltage 1.2/50 μs (Peak Value) b) Rated Duration Power Frequency with Stand Voltage 1 min (r.m.s Value ) kv 125 kv 50 Studies and Documentation Branch 2/4
93 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Winding Conductor Material 17 a) H.V winding Copper b) L.V winding Copper Type of insulation 18 a) H.V winding b) L.V winding Type of Bushing 19 a) H.V 30 NF -250 b) L.V DT Installation (Indoor or Outdoor) Oudoor 21 Noise Level at a Distance of 3 Meters db 55 Transformer Oil (as Standard IEC60296&IEC60422) a) Kinematic Viscosity, at 40 o C mm 2 /s 11 b) Density kg/dm c) Breaking Voltage before Treatment KV 30 d) Breaking Voltage After Treatment KV >60 e) Type Nytro 10 GBXT f) Oil weight Kg 23 Total weight Kg Studies and Documentation Branch 3/4
94 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_250 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 250 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Overall Dimensions a) Length mm 24 b) Width mm c) Height mm d) Space Between U - Bases mm Accessories a) - Expansion vessel (Conservator ) Required b) Oil Filling Opening Required c) Oil Drain Valve Required d) Grounding Terminals Required e) Diagram and Name Plate Required 25 f) Thermometer Pocket Required g) Oil Level Indicator Required h) Lifting lugs Required i) Safety Valve (over Pressure Relief Device) Required j) U - Base Required k) Dehydrating breather (silicagill breather) Required Tenderer s Signature :.. Date: Studies and Documentation Branch 4/4
95 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_630 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 630 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards DIN Type 3 phase oilimmersed with Conservator 5 Continuous Maximum Rating (C.M.R) KVA Rated Frequency Hz 50 7 Cooling method ONAN Normal Voltage Between Phases at No Load 8 a) H.V Volts b) L.V Volts 400 Connection and Vector Group 9 a) H.V Winding Delta b) L.V Winding Star c) Vector Group Dyn11 Tapping Range on H.V Side 10 a) Plus b) Minus NoS x % NoS x % 1x2.5% 3x2.5% c) Type of Tap Changer Off Load Studies and Documentation Branch 1/4
96 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_630 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 630 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Losses (Low Losses Type) 11 a) No load losses Watts 850 b) Load losses Watts Max. Impedance Voltage of Short Circuit at 75 o C Voltage Drop at Full Load a) at unity Power Factor (Cosφ = 1) b) at 0.8 Power Factor ((Cosφ = 0.8)) Efficiency at full load a)at unity Power Factor (Cosφ = 1) b)at 0.8 Power Factor ((Cosφ = 0.8)) Max Temperature rise at C.M.R % 4 % 1.11 % 3.17 % % a) Top Oil by Thermometer b) Average Winding by Resistance c) Hot Spot Corresponding to (b ) o C 55 o C 60 o C Insulating Voltage Level a) Rated lighting Impulse with Stand Voltage 1.2/50 μs (Peak Value) b) Rated Duration Power Frequency with Stand Voltage 1 min (r.m.s Value ) kv 125 kv 50 Studies and Documentation Branch 2/4
97 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_630 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 630 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Winding Conductor Material 17 a) H.V winding Copper b) L.V winding Copper Type of insulation 18 a) H.V winding b) L.V winding Type of Bushing 19 a) H.V 30 NF -250 b) L.V DT Installation (Indoor or Outdoor) Oudoor 21 Noise Level at a Distance of 3 Meters db 60 Transformer Oil (as Standard IEC60296&IEC60422) a) Kinematic Viscosity, at 40 o C mm 2 /s 11 b) Density kg/dm c) Breaking Voltage before Treatment KV 30 d) Breaking Voltage After Treatment KV >60 e) Type Nytro 10 GBXT f) Oil weight Kg 23 Total weight Kg Studies and Documentation Branch 3/4
98 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_630 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 630 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Overall Dimensions a) Length mm 24 b) Width mm c) Height mm d) Space Between U - Bases mm Accessories a) - Expansion vessel (Conservator ) Required b) Oil Filling Opening Required c) Oil Drain Valve Required d) Grounding Terminals Required e) Diagram and Name Plate Required 25 f) Thermometer Pocket Required g) Oil Level Indicator Required h) Lifting lugs Required i) Safety Valve (over Pressure Relief Device) Required j) U - Base Required k) Dehydrating breather (silicagill breather) Required Tenderer s Signature :.. Date: Studies and Documentation Branch 4/4
99 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_400 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 400 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments 1 Name of Manufacturer 2 Country of Origin 3 Reference Manufacturing Standards DIN Type 3 phase oilimmersed with Conservator 5 Continuous Maximum Rating (C.M.R) KVA Rated Frequency Hz 50 7 Cooling method ONAN Normal Voltage Between Phases at No Load 8 a) H.V Volts b) L.V Volts 400 Connection and Vector Group 9 a) H.V Winding Delta b) L.V Winding Star c) Vector Group Dyn11 Tapping Range on H.V Side 10 a) Plus b) Minus NoS x % NoS x % 1x2.5% 3x2.5% c) Type of Tap Changer Off Load Studies and Documentation Branch 1/4
100 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_400 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 400 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Losses (Low Losses Type) 11 a) No load losses Watts 610 b) Load losses Watts Max. Impedance Voltage of Short Circuit at 75 o C Voltage Drop at Full Load a) at unity Power Factor (Cosφ = 1) b) at 0.8 Power Factor ((Cosφ = 0.8)) Efficiency at full load a)at unity Power Factor (Cosφ = 1) b)at 0.8 Power Factor ((Cosφ = 0.8)) Max Temperature rise at C.M.R % 4 % 1.22 % 3.25 % % a) Top Oil by Thermometer b) Average Winding by Resistance c) Hot Spot Corresponding to (b ) o C 55 o C 60 o C Insulating Voltage Level a) Rated lighting Impulse with Stand Voltage 1.2/50 μs (Peak Value) b) Rated Duration Power Frequency with Stand Voltage 1 min (r.m.s Value ) kv 125 kv 50 Studies and Documentation Branch 2/4
101 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_400 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 400 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Winding Conductor Material 17 a) H.V winding Copper b) L.V winding Copper Type of insulation 18 a) H.V winding b) L.V winding Type of Bushing 19 a) H.V 30 NF -250 b) L.V DT Installation (Indoor or Outdoor) Oudoor 21 Noise Level at a Distance of 3 Meters db 58 Transformer Oil (as Standard IEC60296&IEC60422) a) Kinematic Viscosity, at 40 o C mm 2 /s 11 b) Density kg/dm c) Breaking Voltage before Treatment KV 30 d) Breaking Voltage After Treatment KV >60 e) Type Nytro 10 GBXT f) Oil weight Kg 23 Total weight Kg Studies and Documentation Branch 3/4
102 Gaza Electricity Distribution Corporation LTD. Technical Guarantees No. ODT_400 22/0.4 KV Low Losses, 3 phase, Outdoor Distribution Transformer 400 KVA Rating No Description Unit Requirements Offered Data Notes, Remarks, Ref to Documentation Evaluation Committee Comments Overall Dimensions a) Length mm 24 b) Width mm c) Height mm d) Space Between U - Bases mm Accessories a) - Expansion vessel (Conservator ) Required b) Oil Filling Opening Required c) Oil Drain Valve Required d) Grounding Terminals Required e) Diagram and Name Plate Required 25 f) Thermometer Pocket Required g) Oil Level Indicator Required h) Lifting lugs Required i) Safety Valve (over Pressure Relief Device) Required j) U - Base Required k) Dehydrating breather (silicagill breather) Required Tenderer s Signature :.. Date: Studies and Documentation Branch 4/4
Technical Specification for Oil insulated Transformers U m < 24 kv up to 1250 kva
to 1250 kva Page 1/10 Technical Specification for Oil insulated Transformers U m < 24 kv up to 1250 kva This technical specification is valid for the business unit E.ON Sweden of the market unit E.ON Nordic.
Tasarım ve Baskı: AJANSBRAND A 15.09.2014
www.kosgeb.gov.tr Tasarım ve Baskı: AJANSBRAND A 15.09.2014 THE ENERGY TRANSFERRED TO NATURE www.atstrafo.com ABOUT Having been founded in Adıyaman Organized Industrial District in 2003, ATS Trafo carries
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
TECHNICAL SPECIFICATION FOR 200, 315 & 630 KVA, 11/0.433 KV DRY-TYPE (VPI) DISTRIBUTION TRANSFORMERS (INDOOR AND OUTDOOR)
TECHNICAL SPECIFICATION FOR 200, 315 & 630 KVA, 11/0.433 KV DRY-TYPE (VPI) DISTRIBUTION TRANSFORMERS (INDOOR AND OUTDOOR) (SPECIFICATION NO. DIST/MM-II/03/2005) MAHARASHTRA STATE ELECTRICITY DISTRIBUTION
1ZSE 2750-105 en, Rev. 8. Transformer bushings, type GOE and GOE(2) Technical guide
1ZSE 2750-105 en, Rev. 8 Transformer bushings, type GOE and GOE(2) Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible
DRY TYPE TRANSFORMER
PRODUCT LEAFLET DRY TYPE TRANSFORMER Single-phase, three-single, three-two and three-phase transformers 1.1 kv to 7.2 kv classes 1 60 40152-13/09/2011 Dry Type Transformers Transformers meant to be installed
PRE COMMISSIONING TESTS ON EQUIPMENT AT 33/11 KV SUB STATIONS
PRE COMMISSIONING TESTS ON EQUIPMENT AT 33/11 KV SUB STATIONS TESTS ON TRANSFORMERS 1. IR Values a) For 33/11 KV Power Transformer 2500 V megger is to be need. b) Power Transformer neutral Earthing is
1ZSC000563-AAC en, Rev. 7. Resin impregnated paper bushing, oil to air, type GSB Technical guide
1ZSC000563-AAC en, Rev. 7 Resin impregnated paper bushing, oil to air, type GSB Technical guide Original instruction The information provided in this document is intended to be general and does not cover
EEL303: Power Engineering I - Tutorial 4
1. Determine the voltage at the generating station and the efficiency of the following system (Figure 1): Both transformers have ratio of 2kV/11kV. The resistance on LV side of both Figure 1: transformers
TECHNICAL SPECIFICATION FOR 11 & 22 KV DISTRIBUTION TRANSFORMERS OF RATINGS 63 KVA & 100 KVA CAPACITY (SPECIFICATION NO.WORKS T&D : 01-N/2001)
TECHNICAL SPECIFICATION FOR 11 & 22 KV DISTRIBUTION TRANSFORMERS OF RATINGS 63 KVA & 100 KVA CAPACITY (SPECIFICATION NO.WORKS T&D : 01-N/2001) MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE
Technical data UNIBLOCK UBSF 180 625
Data TECHNICL DT Technical data UNIBLOCK UBSF 80 6 Output data Type UBSF 80 UBSF 0 UBSF 00 UBSF 6 Output power 80 kv 0 kv 00 kv 6 kv Output voltage 80/77 V 0/ V 0/ V 0/ V Output current 7 8 66 80 Power
SECTION 16461 DRY-TYPE TRANSFORMERS
SECTION 16461 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Furnishing and installation of and testing of cast resin dry type MV/LV distribution transformer in accordance with specifications and drawings. Any
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
SPECIFICATIONS OF STATCOM TRANSFORMER (FOR 2.5 MVAR STATCOM)
SPECIFICATIONS OF STATCOM TRANSFORMER (FOR 2.5 MVAR STATCOM) PROJECT EQUIPMENT Quantity : 2.5 MVAR STATCOM. The transformer will be used for connecting a 2.5 MVA Inverter with grid at 6.6 kv. : Transformer
Itho Products for Hot and Boiling water. product-
Itho Products for Hot and Boiling water product- 2 This booklet provides additional information on the range of hot and boiling water appliances by Itho. The data will allow you to determine which product
Tutorial One: Calculation of leakage inductance of transformer using FEM. 31.5 MVA, 132 kv/33kv, Y/, Ampere-turns: 135024, No.
Tutorial One: Calculation of leakage inductance of transformer using FEM Consider a transformer with the following rating: 31.5 MVA, 132 kv/33kv, Y/, Ampere-turns: 135024, No. of HV turns = 980 Although
Presentation of the France Transfo factories
Presentation of the France Transfo factories France Transfo's internationally recognised and highly esteemed expertise is today exported to more than 80 countries throughout the world. Over the past 15
LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS
Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEYLON ELECTRICITY BOARD SRI LANKA Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEB Standard 027: 1998 CEYLON
HV glass suspension insulator U70BS and U70BL type Ball and socket type Standard profile
U70BS and U70BL type IEC 60305 U70BS U70BL GOST 27661 ПС70Е ПС70Е Minimum mechanical failing load kn 70 70 Minimum mechanical residual strength kn 56 56 Diameter of the insulating part, D mm 255 255 Nominal
Lightning Arresters P30027 18 KVA P30038 10 KVA. Description & Installation
Lightning Arresters P30027 18 KVA P30038 10 KVA Description & Installation Printed in USA 09/11 TO330 Rev. B Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT OVERVIEW 2 2.1 Intended Uses 2 2.2 Lightning
UGVCL/SP/591/11KV HT AB CABLE
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched
Transformer Bushings for GIS
Transformer Bushings for GIS Oil to SF6 Connections GARIP RTKG 725-55 kv SQS certified ISO 91 / ISO 141 Bushings RIP - Technology for SF6 / Oil - Bushings In modern metal enclosed switchgear SF6 -gas is
Vario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
Medium-voltage transformers
Medium-voltage transformers We make energy measurable and take care of your future www.mbs-ag.com Page 2 E-Mail: info@mbs-ag.com Web: www.mbs-ag.com Contents Current transformers Technical characteristics
MEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
HP switch LP switch Discharge thermo Comp. Surface thermo
1 Specifications Zubadan Model Name PUHZ-SHW80VHA PUHZ-SHW11VHA PUHZ-SHW11YHA Power supply (phase, cycle, voltage) 1φ, V, Hz 1φ, V, Hz 3φ, 0V, Hz Max. current A 9.5 35.0 13.0 Breaker size A 3 16 Outer
3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
Distribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation
Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT
TRANSFORMER FITTINGS & ACCESSORIES
TRANSFORMER FITTINGS & ACCESSORIES CONTENTS 1. Low Voltage transformer bushing clamps... 3 1.1. TOGA type clamps... 5 1.1.1. TOGA 1 type clamps... 5 1.1.2. TOGA 2 type clamps... 6 1.1.3. TOGA 3 type clamps...
MultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
Power Voltage Transformers for Air Insulated Substations. THE PROVEN POWER.
Power Voltage Transformers for Air Insulated Substations THE PROVEN POWER. Introduction Trench Power Voltage Transformers (Power VTs) combine the attributes of an inductive voltage transformer with the
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
TYPE TEST CERTIFICATE OF SHORT-CIRCUIT PERFORMANCE. A three-phase outdoor oil-immersed distribution transformer
168-08 TYPE TEST CERTIFICATE OF SHORT-CIRCUIT PERFORMANCE APPARATUS A three-phase outdoor oil-immersed distribution transformer DESIGNATION 1000 kva SERIAL No. 1-08-112-01-0001 Rated power Rated voltage
Digital Energy ITI. Instrument Transformer Basic Technical Information and Application
g Digital Energy ITI Instrument Transformer Basic Technical Information and Application Table of Contents DEFINITIONS AND FUNCTIONS CONSTRUCTION FEATURES MAGNETIC CIRCUITS RATING AND RATIO CURRENT TRANSFORMER
This section applies to the design and installation of transformers.
ELECTRICAL: TRANSFORMERS BASIS OF DESIGN This section applies to the design and installation of transformers. Design Criteria 13.8-kV equipment shall be 15-kV class. Coordinate with short-circuit studies
Paper on Basbar Trunking System for Electrical Supply to Industrial & commercial Installation
IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 04, Issue 01 (January. 2014), V6 PP 01-12 www.iosrjen.org Paper on Basbar Trunking System for Electrical Supply to Industrial
AutoLink Three-Phase Sectionalizer Specifications. Scope. General. Applicable Standards. Operating principle
Scope This specification stipulates the minimum requirements for mechanically linked three-phase electronic sectionalizers, for use on outdoor medium voltage overhead lines of 15, 27, and 38 kv. Electronic
Size template. Grid Connection Masterclass Energex John Lansley Senior Network Solutions Engineer
Size template Grid Connection Masterclass Energex John Lansley Senior Network Solutions Engineer The average system size has doubled since 2010 Key Network Issues Reverse power on up to 12 off 11 kv feeders
SECTION 02845 GUARDRAILS
SECTION 02845 GUARDRAILS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals necessary and repair, replace or install all types of guardrails as specified herein
Morgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
technical data air conditioning systems RXS20-25-35E (single phase) FBQ-B8V1-B8V3B Split Heat Pump Condensing Units Split Sky Air
technical data RXS20-25-35E FBQ-B8V-B8V3B (single phase) Split Heat Pump Condensing Units air conditioning systems Split Sky Air Outdoor Units R-40A RXS-E2VB Split Sky Air Outdoor Units Features O u t
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
FLEXIBLE INDUSTRIAL CABLES H07RN-F TENAFLEX SR
FLEXIBLE INDUSTRIAL CABLES H07RN-F TENAFLEX SR Standards : CENELEC HD 22.4 NF C 32-102-4 DIN VDE 0282-1 and VDE 0282-4 BS 6007 and BS 6500 IEC 60245-4 Rated voltage Rated voltage: 450/750 V (Use up to
GUIDELINES FOR UTILITY INSTALLATIONS Part 1 - Wire Lines and Communications Cables
Engineering Department SEPTEMBER, 2007 GUIDELINES FOR UTILITY INSTALLATIONS Part 1 - Wire Lines and Communications Cables General Requirements This section applies to all public and private utilities,
Installation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale
Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates
Low Voltage Transformers Sealed, General Purpose, Dry Type
Low Voltage Transformers Sealed, General Purpose, Dry Type Catalog 7400CT9601R4/08 08 Class 7400 CONTENTS Description..............................................Page Introduction.................................................
Enhanced Quality with a Touch of Style
Rudolf Current Transformer Enhanced Quality with a Touch of Style Current Transformer Enhanced Quality with a Touch of Style New Products Rudolf launched our new encapsulated current transformer. Portraying
Doc Ref: 2015.06.01.002. 602.783.1112 baselayer.com 2015 BASELAYER TECHNOLOGY, LLC
TM 602.783.1112 baselayer.com 2015 BASELAYER TECHNOLOGY, LLC TM D400E Data Module (60Hz) The EDGE D400E is designed to meet high power density requirements for both the HPC and Web Scale environments while
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
EUPEN Cable Inc. North & South America
toronto EUPEN Cable Inc. North & South America Bethlehem, PA dallas, tx Mexico city Tampa Bay EUPEN CABLE INC. Table of Contents ELLIPTICAL WAVEGUIDE and Connectors.................................................5
LEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34
LEVEL GAUGES WITH MAGNETIC JOINT L 14 - L 22 - L 34 2 LEVEL GAUGES WITH MAGNETIC JOINT SIZE Ø 140/220/340 58 58 TYPE LA TYPE LA 14 30 S 22 33 TYPE LA 22-34 NO. HOLES Ø D2 76 O-RING CENTRE OF THE CONSERVATOR
Pressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
Kit 106. 50 Watt Audio Amplifier
Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
produces and delivers products worldwide can provide the optimal are dedicated to supplying you with superior advice and global support.
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. ong od Insulators Only a company that develops, produces and delivers products worldwide can provide the optimal solution for
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
KOLMA and IHDA Indoor type Cable Current Transformers Catalogue ABB Power Distribution ABB Transmit 1 KKOLMA 1 GB
KOLMA and IHDA Indoor type Cable Current Transformers Catalogue ABB Power Distribution ABB Transmit 1 KKOLMA 1 GB KOLMA and IHDA Indoor Type Cable Current Transformers Index Description... 3 Technical
SPECIFICATIONS FOR 220KV CAPACITOR VOLTAGE TRANSFORMER. The equipment is required for 220KV system. The system data is given as under:
REQUIREMENT : The equipment offered shall be highly reliable suitable to operate satisfactorily in hot humid and polluted climate. The equipments offered shall work satisfactorily within temperature range
Transformers Energy efficient transformer solutions European Minimum Energy Performance Standard (MEPS)
Transformers Energy efficient transformer solutions European Minimum Energy Performance Standard (MEPS) 2 European MEPS for transformers The EU MEPS (European Minimum Energy Performance Standard) Transformers
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Page 162. Page 154. Page 158 Page 146. Page 157. Page 152. Page 160. Page 149. Page 159. Page 156. Page 150
Page 162 NEW Page 154 Page 158 Page 146 Page 157 Page 152 Page 160 Page 159 Page 149 Page 156 Page 150 Summary Audible Signal Devices Page 151 Page 163 Page 148 installation version Free-standing Electronic
LOW-VOLTAGE CURRENT TRANSFORMERS
LOWVOLTAGE CURRENT TRANSFORMERS 5 A Power network meters ND0 and ND type. N4Z and N5Z Tel: (+48 68) 45 75 39; 45 75 305; 45 75 3; 45 75 368; email: export@lumel.com.pl ul. Słubicka 657 Zielona Góra CONTENTS
Distribution Voltage Regulators
Distribution Voltage Regulators Type JFR Single Phase 2.5 to 19.9 kv Type SFR Three Phase 13.2 to 34.5 kv Power Transmission & Distribution Siemens JFR & SFR Voltage Regulators Improving Quality of Service
Secondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
BUILDERS AND CONTRACTORS GUIDE FOR ELECTRIC SERVICE
BUILDERS AND CONTRACTORS GUIDE FOR ELECTRIC SERVICE Toll Free Telephone Numbers Residential Services 800.454.3853 Commercial Services 800.653.5307 Utility Locating Company N.C. 800.632.4949 S.C. 888.721.7877
SMS 4 / SMS 5 safety mat Product information
SMS 4 / SMS 5 safety mat Product information SMS 4 / SMS 5 safety mats Safety mats are used for the protection of man on machinery and plants with hazardous movements. Typical fields of application are,
RAILWAY CATENARY SYSTEMS. Components and Systems for the Electrification of Railway Lines. ibemo
Connectors, Clamps, Compensating Devices, Insulators and Safety Equipment for Overhead Catenary Lines RAILWAY CATENARY SYSTEMS Components and Systems for the Electrification of Railway Lines. Welcome to
Issued 06-01-07 E.C.S. Section WTR00 INFORMATION SECTION Page 1 of 1
Issued 06-01-07 E.C.S. Section WTR00 INFORMATION SECTION Page 1 of 1 INDEX SECTION WTR01: ELECTRICAL CONNECTIONS PRIMARY.. Page 1 SERVICE DROPS FROM THREE-PHASE TRANSFORMER BANKS.. Page 9 SECTION WTR02:
CEILING CASSETTE FAN COIL UNIT
CEILING CASSETTE FAN COIL UNIT Operation and Installation Manual MHCFC4W-04, 08, 12, 16 Four way ceiling cassette fan coil unit Please read this manual before using the fan coil unit. Installation and
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Power Transformers 10 to 100 MVA
Power Transformers 10 to 100 MVA Transformer technology at a glance An extensive transmission system with efficient transformers is indispensable to ensure a reliable supply of power. Consequently Siemens
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
Cable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
S. C. Electric Cooperative s Specification for a Three-Phase, Padmounted URD Transformer (Revised 12/2014)
1.0 GENERAL S. C. Electric Cooperative s Specification for a Three-Phase, Padmounted URD Transformer (Revised 12/2014) 1.1 This specification covers the electrical and mechanical characteristics of Three-Phase,
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
OLI. Oil level indicator
OLI Oil level indicator Oil level indicator Unexpected or accidental oil leakages may occur randomly along transformer s lifetime. Clear indication of oil level inside transformer tank and on load tap
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories 2015 PRODUCT CATALOG 2ND EDITION LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories A technically and commercially
Removing chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
ACTIV-8 PLUS Insulated Conductor Bar
ACTIV-8 PLUS Insulated Conductor Bar A product made in Australia www.conductix.com.au ACTIV-8 PLUS ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It was designed by Conductix
Voltage Loss Formula s
www.litz-wire.com HM Wire International Inc. Phone: 330-244-8501 Fax: 330-244-8561 Voltage Loss Formula s www.hmwire.com Voltage loss in a wire is synonymous to pressure loss in a pipe. Electric current
Cables, Cable Laying & Accessories Manual
Distribution Business Cables, Cable Laying & Accessories Manual Database ref: File Ref: Title Page & Revision Log For Cables & Access v4 - Nov 2003.doc Manual Name: Cables & Accessories Manual Version
Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
HV Submarine Cable Systems Design, Testing and Installation
HV Submarine Cable Systems Design, Testing and Installation CIGRE Ireland Technical Seminar 6 th October 2010 Robert Donaghy Senior Consultant Engineer, ESB International Presentation Overview Applications
VDE Information. Degree of Pollution, Clearances and Creepage Distances and Insulating Materials
VDE Information General Information The voltage which can be applied to a terminal depends on the relevant regulations, the installation conditions and, of course, the dimensions and insulating materials
HPS Universal. Single and Three Phase Potted. Buck-Boost Transformers. Buck-Boost Applications & Standard Specification... 80
Buck-Boost Transformers Single and Three Phase Potted Buck-Boost Transformers Buck-Boost Applications & Standard Specification... 80 Selecting Buck-Boost Transformers... 81 Single Phase Selection Tables...
ELECTRIC METERING COMMERCIAL & INDUSTRIAL
ELECTRIC METERING COMMERCIAL & 1.0 INDEX 1.0 INDEX 2.0 SCOPE 3.0 GENERAL REQUIREMENTS 4.0 METER LOCATIONS 5.0 UNDERGROUND TERMINATIONS 6.0 METERING TRANSFORMER ENCLOSURES 7.0 SINGLE CUSTOMER METER INSTALLATIONS
Free piston Stirling engine for rural development
Free piston Stirling engine for rural development R. Krasensky, Intern, Stirling development, r.krasensky@rrenergy.nl W. Rijssenbeek, Managing director, w.rijssenbeek@rrenergy.nl Abstract: This paper presents
Aerial Fibre Optics. Complete One Stop Solution for Aerial Fibre Optics. OPGW Cable and Fittings for OPGW
Complete One Stop Solution for OPGW Cable and Fittings for OPGW 53, Justice Chandra Madhav Road, Kolkata - 700020. India. Phone: 91-33-24748575 / 7565 Fax: 91-33-2476-1955 Email: sales@supremeco.com Website:
MANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01