INTERAPID Small Magnetic Supports
|
|
- Roland Sullivan
- 7 years ago
- Views:
Transcription
1 M E A S U R I N G S U P P O R T S INTERAPID Small Magnetic Supports Ideal for dial test s (lever-type) or dial gauges having a 40 dial diameter Versatile due to 2 rigid joints and fine adjust option. UJ 15 Model UJ 15G Model Rounded base with permanent magnet Holding force on a flat surface:» 220 N for UJ 15 ³ 50 N for UJ 15G 0,47 kg for UJ 15 0,9 kg for UJ 15G Steel Base Plate 50 x 80 x 20 0,60 kg 80 ø10 68 ø 8 ø52 ø INTERAPID small magnetic support UJ15 with a 8 diameter clamping bore and dovetail clamp INTERAPID small magnetic support UJ15G with both a 8 and 4 diameter clamping bore and dovetail clamp Accessory Steel base plate for use of UJ 15 as mobile support H-2 H-2
2 M E A S U R I N G S U P P O R T S Model with Articulated Arm Base has a vee recess and one magnetic flat face with disengageable magnet. Articulations made from duralumin. clamping bore Holding force on a flat surface» 170 N Dovetail clamp with a 8 diameter 0,4 kg Consisting of: INTERAPID small magnetic support with articulated arm Full length 1 Articulated arm Length 1 Dovetail clamp with fine adjustment 1 Magnetic base L x W x H x 0 x M6 ø8 Magnetic Supports with Flat or V-Base Model with a flat base has 2 rounded permanent magnets 72 x 8 x 11 for model with a flat base or 72 x 8 x 26 for model with a V-base Holding force:» 180 N for the flat base or» 260 N for the V-base Clamp with a 8 diameter clamping bore INTERAPID magnetic support with a flat base INTERAPID magnetic support with a V-base H-H-
3 M E A S U R I N G S U P P O R T S INTERAPID Magnetic Supports Standard Model and Models with Powerful Holding Force Disengageable magnet. Clamp with a 8 dia. clamping bore. N Fine V-Base adjust for Standard model» Powerful holding force» Powerful holding force» ø16 ø21.8 ø21.8 H-4 H x x x 68
4 M E A S U R I N G S U P P O R T S Magnetic base has Models with Articulated Arm Attach simply and securely using a single lobe knob Solid arm with highly rigid articulations. 2 flat faces plus 1 prismatic one. Articulations made from duralumin. Disengageable permanent magnet. M6 Dovetail clamp with a 8 diameter clamping bore. Magnetic base (L x W x H) 60 x 50 x 55 1,45 kg or 1,85 kg M8 H L N Fine adjust V-Base for Magnetic support 10» Magnetic support 90» Consisting of: Articulated arm Articulated arm Clamp Magnetic base» Magnetic base has 2 flat faces plus 1 prismatic one. Disengageable permanent magnet. Full length 50. Dovetail clamp with a 8 diameter clamping bore. Model with Flexible Arm For hard-to-reach locations Lever controlled arm that holds securely on any surface. Holding force on a flat surface» 1000 N ø x INTERAPID magnetic support with flexible arm H-5H-5
5 M E A S U R I N G S U P P O R T S INTERAPID Measuring Support with Suction Base Holds firmly on any plain, flat surface Clamps easily and reliably over the lobe knob Provides high rigidity Free from magnetic fields. M6 Round suction base in duralumin.(88 in diameter and 28 in height) with a flat face. Articulations in duralumin. Disengageable suction effect using the lever. Dovetail clamp with a 8 diameter clamping bore. 1,1 kg M8 H L N Fine adjust Support with suction base 6 280» 400 consisting of: Articulated arm Clamp Round suction base 280» 400 INTERAPID Measuring Supports Base ø8 119 with resting front face. Clamp for a 8 diameter mounting rod or a dial gauge with lug. Model No with added dovetail clamp Cast iron base 98 x , kg or 4,5 kg ø17,8 25 Used in conjunction with 150 x INTERAPID small support INTERAPID small support Dial test s, small dial gauges Dial test s, dial gauges, precision s, electronic probes etc. H-6 H-6
6 Stand with lateral guiding faces. Vertical column that can be moved along the T-slot. Provided with 2 rigid articulations. INTERAPID UD 12 Universal Stand Medium-sized sliding support for dial test s (lever-type), dial gauges, electronic probes etc. With fine adjust option. 170 Cast iron base, kg ø x Furnished with: INTERAPID UD 12 universal stand Clamp with a 8 dia. tightening Clamping rod, 8 dia., with dovetail recess INTERAPID UA 1 Measuring table with ground measuring face. Dismountable column. Measuring arm with a 8 dia. tightening. Measuring stand fine adjustment Suitable as basic component for mounting specific workpiece attachments for series inspection. Cast iron table. Chrome-plated steel column. Spherical graphite cast iron arm. kg ø8 57 ø x INTERAPID UA 1 measuring stand x 100 H-7H-7
7 INTERAPID UA 0 Basic component for mounting specific workpiece attachments for series inspection. Basic stand Ground measuring face. 2 T-slots. Dismountable column Cast iron table. Chrome-plated steel column ø x 10 ø0 Measuring arm Fine adjustment within a range of 1. 8 dia. clamping bore. Sliding arm Floating holder for TESA YA. Adjustable swinging movement. 1 dia. clamping bore. 5, 57 or 80 travel length. Measuring span 60. Depth stop plate Dimensions: 115 x 5 x, vee recess for diameters 120. Two tightening screws INTERAPID UA 0 basic stand ( measuring arm) x 115 Accessories UK 20 measuring arm with fine adjustment UK 25 sliding arm used in conjunction with TESA YA for stationary bore measurement (also see page G-6). UAZ 10 depth stop plate INTERAPID Small Measuring Stand Additional data 4,85 kg (basic stand). 0,85 kg (measuring arm). 1,75 kg (sliding arm). With round steel measuring table. 122 Measuring arm with a 8 dia. clamping bore, fine adjustment. Measuring span 48 ø49 ø22 Measuring table and column in hardened steel 2,7 kg 128 x INTERAPID small measuring stand Ø 49 H-8 H-8
8 INTERAPID Measuring Stands Supports N o black burnished steel column with a 8 dia. clamping bore. N o Chrome-plated column with thread and setting ring for height adjustable measuring arm. 8 dia. clamping bore. Measuring face with dust grooves. N o Chrome-plated steel column. Tilting measuring arm with articulation. 4 or 8 dia. bore for a dovetail clamp or lug. N o Chrome-plated steel column. Sliding measuring arm, horizontally. 4 or 8 dia. bore for a dovetail clamp or lug. µm as per DIN 876 T1, grade ø x ø5 97 x x 175 ø ø5 180 x x Measuring face Measuring face Fine Span adjustment Granite 100 x Steel, hardened 100 x , Granite 180 x adjustable Granite 180 x adjustable Measuring table Measuring table Column Column kg Granite 100 x 150 x , Granite 120 x 175 x , Granite 180 x 250 x , Granite 180 x 250 x ,5 H-9H-9
9 ø8 ø6 INTERAPID UM 20 Stable stand for measuring small parts accurately. 5 INTERAPID UM 20 measuring stand ( measuring table) Height adjustable table mount with thread and fine adjustment. Clamping groove for UMZ 12 depth stop (No ). With a 8 dia. tightening plus two 6 dia. clamping bores for the UPZ 6 probeholder. Measuring span 5. kg (measuring stand alone) r 145 x 125 Fine adjustment UMZ 40 meas. table with dust grooves Hardened steel, lapped measuring face Ø 66 x 12 UMZ 41 plain measuring table Hardened steel, finish ground measuring face Ø 66 x 12 UPZ 6 double probe-holder 8 dia. mounting bore for 2 probes. Clamped on the measuring stand with 2 shafts having a 6 dia. Sideways UMZ 12 depth stop Clamp to be mounted in the T-slot of the basic stand. Hardened and ground stop plate. Resting face x 11 UMZ 1 side stop Hardened and ground. For use along with UMZ 12. Resting shoulder ,5 x 10 x H-10
10 KMV 61 Measuring Stand Precision made even more easier. Heavy cast-iron base Sensor and holder not included Stand alone 4,4 kg wooden case Application range 0 to 60. Measuring table with measuring span of 10. Can be locked by step of 0,01. Spindle accuracy: 1 µm over 10. Measuring arm with both a rack mechanism and built-in fine adjust device. Ø 8 Measuring table and holder for a value sensor not included 65 Measuring table with micrometer element ,01 85 x 160 Holder for value sensor Holder with a 8 dia. clamping bore for a probe or a dial gauge Holder for I-DIM probes T T 7012 Measuring tables T 6010 T-050 T-4010 Rotating table provided with 25 clamping holes. Plain steel table, 50 diameter, for thickness measurement. T 9010 T-5010 Plain steel table, 50 diameter with both a 5H6 dia. clamping bore in the middle and locking screw for mounting a swivel pin or a shaft. T-6010 Plain steel table, 50 diameter, with a 5 dia. steel plate in the middle T T 7011 T-7010 Steel table, 50 diameter, with dust grooves T 5010 T-7011 T-7012 Grooved steel table, 117 diameter, with cut off end for large workpieces and the like Plain steel table, 117 diameter, with cut off end for large workpieces T 050 T-9010 Grooved steel table, 50 diameter, with a 5 dia. steel plate in the middle H-11 H-11
11 INTERAPID Universal Stands UP These two universal stands provide different height levels along with a wide range of accessories that serve for setting up a variety of measuring configurations High-precision components, also highly stable and extremely wearresistant Guaranteed lowest measurement uncertainty for the skilled manufacuring shop floor. Besides dial gauges, precision s and dial test s (lever-type), both stands enable electronic probes to be mounted, especially to carry out direct, sum or comparative measurement (see section N). Heavy cast iron base with mounted ground steel column (50 dia.). Measuring arm with a 8 dia. tightening and 2 mounting bores having a 6 dia. for UPZ 6. Fine adjust control using the protected knob. 1 travel length. Base and measuring arm in cast iron. Dull-chrome plated steel column. INTERAPID universal stands UP ( measuring table) Heavy cast iron models. Measuring arm with locking device and brake stop. For additional technical data, see opposite. kg UP 160 measuring stand , UP 200 measuring stand ø50 ø6 ø8 70 H x 170
12 UPZ 40 standard measuring table Hardened steel. Two measuring faces with dust grooves, lapped. One face has a 1 wide strip along the centre. µm x 95 1 UPZ 46 A measuring table along with probe-holder Feature a 8 dia. clamping bore for axial probes. Hardened and lapped measuring face with dust grooves as well as a 1 wide strip along the centre. UPZ 20 side plates To be mounted sideways on both UPZ 40 and UPZ 46 A measuring tables. Made of black plastic. in pairs. UPZ 47 large measuring table along with probe-holder 8 dia. clamping bore for axial probes. Hardened and lapped measuring face with dust grooves as well as a 18 wide strip along the centre. µm x 95 1 Resting face x 95 µm x 120 1,5 UPZ 5 cross beam For centre and vee supports. Made from cast iron and ground. Length UPZ 52 resting blocks For cylindrical or conical components. Resting plates with tungsten carbide pins, adjustable to the part diameter. Distance between plates matches 00. Used with cross beam UPZ 5. in pairs UPZ 55 V-blocks Support parts on tungsten carbide pins. Distance between blocks matches 280. With length stop. Used with cross beam UPZ 5. in pairs H-1 H-1
13 UPZ 54 length stop For use on the cross beam UPZ 5 with resting and V-blocks. A probe can be mounted instead of the stop rod. UPZ 51 centre supports For axial and radial run-out inspection. Max. distance between points: 155. Feature solid and spring-loaded hollow points, movable lengthwise but also lockable. Used with cross beam UPZ 5. in pairs Height of points UPZ 6 double probe-holder Tightening collar, 8 dia., for 2 electronic probes. Mounted on the stand by means of 2 shafts having a 6 dia. UPZ 15 limit stop Mounted with clamp on the column. Hardened, dull-chrome plated. Lateral Stop face x 20 UPZ 14 stop plate For use with limit stop UPZ 15. Hardened, dull-chrome plated Vee angle H-14
14 UPZ 60 rack and pinion slide For vertical adjustment of the measuring arm Travel length UPZ 42 measuring arm with micrometer head Robust construction with built-in ISOMASTER micrometer head and spindle lock. Conform to DIN 86, part 2. Tungsten carbide measuring face. µm ,01 Ø 8 UPZ 4/1 contact point with flat measuring face To be mounted on the micrometer element of the measuring arm UPZ 42. Steel measuring face, hardened and lapped Ø 0 UPZ 4/2 Contact point with a ball tip To be mounted on the micrometer element of UPZ 42. Tungsten carbide ball tip Ball tip H-15 H-15
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationMarStand. Indicator Stands Comparator Stands
MarStand. Indicator Stands Comparator Stands Indicator Stand 815 GN 6 2 Indicator Stand 2400 6 2 Indicator Stand 815 MA 6 3 Indicator Stand 815 MB 6 3 Indicator Stand 815 MG 6 4 Indicator Stand 815 P 6
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationCommon Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More information1722 / 1723 / 1724 DIGI-MET Indicators
1722 / 172 / 1724 DIGI-MET Indicators for static measurements IP 52 1722 502 172 502 1724 502 Electronic functions Housing Ø 60 mm Replacement probe tip M 2.5 Protection class IP52 Clamping shank Ø 8 mm
More informationNo. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight
No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight MOUNTING AND ADJUSTING MOUNTING LYMAN NO 57 RECEIVER SIGHT The No. 57 Sight is designed primarily for rifles with round receivers.
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationMilling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationDIGI-MET ELECTRONIC INDICATORS
DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface
More informationFAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationB098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS
INSTRUCTION MANUAL TRAVELLING BEAM DEVICE MANUAL CODE B098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS REV. DESCRIZIONE REDATTO/GESTITO APPROVATO COD. IDENT. PAGINE
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationStraightness, Angle and Inclination Measurement
www.tesagroup.com J-1 INCLINOMETERS AND PRECISION LEVELS Irrespective of whether they are spirit or electronic inclinometers, all precision levels are based on the same perfectly reliable reference but
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationTEC APO140. This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy.
140 manuals 2013_110 manuals 1/13/2013 10:40 PM Page 1 TEC APO140 This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy. OWNER S MANUAL 2013 140
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationNewland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationMilling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationMEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE
MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationCALIBRATION FOR LAL20X & LAL24X
CALIBRATION AND FAULT FINDING FOR LAL20X & LAL24X DUMPY LEVELS MEASURING EXPERTS SINCE 1869 How The LAL20X & LAL24X Works The Automatic level is called Automatic because it requires only a simple basic
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More information1500 Follow Spot Yoke
= 1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical
More informationIndustrial magnetic products and tools
Industrial magnetic products and tools M Products and tools for industrial applications akker Magnetics, established in 1971, is a leading producer of magnetic products and industrial systems based on
More informationSelf-aligning ball bearings
Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationMETAL-TURNING LATHE Built from Stock Parts
by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order
More informationStyli and accessories
Styli and accessories - technical specifications www.renishaw.com Issue 13 Technical specifications Styli and accessories When precision counts, insist on genuine Renishaw styli. Don t settle for less!
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationGIBRALTAR 6000 Series Cymbal Stands
GIBRALTAR 6000 Series Cymbal Stands Gibraltar Upgrades 6000 Series Cymbal Stands with Swing Nut fast cymbal mounting system. Professional in features yet light enough in weight and mass for easy transport.
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More information3 3.4 Measuring tapes Spirit levels Levelling and laser technology
0 Vernier callipers Depth gauges 1 Outside and inside micrometers 2 Dial gauges / callipers Vblocks, measuring tables Centring devices Page 526 540 Page 541 554 Page 555 577 Height gauges, scribers Engineers
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationBUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More informationTA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationmechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationMould and Die Standard Parts
Mould and Die Standard Parts Tampere University of technology - Tuula Höök Mould standard parts can be divided into the following groups: Standard mould set with guide bars, guide sleeves and other guiding
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationHand-held marking system FlyMarker mini
Hand-held marking system FlyMarker mini ergonomics Due to the well-conceived economics, the marking device sits perfectly in the hand and an effortless operation is possible, also in vertical work positions.
More informationMEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
More informationSCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationSECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationUltra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationOPERATING INSTRUCTIONS FOR
OPERATING INSTRUCTIONS FOR MEDECO KEY MACHINES FOR MEDECO ORIGINAL, BIAXIAL, MEDECO 3, KEYMARK CLASSIC & KEYMARK X4 PRODUCTS MEDECO HIGH SECURITY LOCKS ASSUMES NO RESPONSIBILITY FOR INJURY OR PROPERTY
More information3D Work- and Welding Table D28. Innovative technology improved. Englisch English Version 7.0. Award winning design. D 28 ProfiLine
Englisch English Version 7.0 D28 ProfiLine meets the requirements of high-quality suppliers D 28 ProfiLine 3D Work- and Welding Table D28 Award winning design D28 ProfiLine meets the requirements of high-quality
More informationWelcome. www.airforceairguns.com. For more information on all of our products, please visit us at. made in the usa
s e r i o u s a i r g u n n i n g s t a r t s h e r e Welcome In this catalog you will find some of the most advanced, flexible and accurate airgun products available on the market today. As the first
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationSURFACE PLATES - SQUARES - BEAMS - STANDS V-BLOCKS - STRAIGHT EDGES SPECIAL CONSTRUCTIONS
Präzisionstechnik Klaus Schlitt e.k. Große Hub 3a 65344 Eltville-Martinsthal/Germany Tel.: +49 - (0)6123 70377 0 Fax: +49 - (0)6123 70377 22 e-mail: info@schlitt-werkzeuge.de http://www.schlitt-werkzeuge.de
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More information