Optus IV. A modern lighting solution for office and educational environments

Transcription

1 Optus IV A modern lighting solution for office and educational environments

2 2

3 Sophisticated lighting technique that enables outstanding visual performance at a low running cost The Optus range provides a formidable solution for all office and educational lighting needs in an attractive package. The modern design theme which co-ordinates the range provides an unobtrusive yet attractive direct/indirect or surface alternative to recessed lighting in the workplace. The use of extruded aluminium profiles and high quality materials ensures sustainability and long life. The design language is a modern classic with its concave shaped end cap and sharp edged decor, still with clear reference to the earlier generations of Optus. The Optus range has been specially designed to address the requirements for office and school environments, providing task and general lighting and to illuminate whiteboards. In both school and office environments we recommend suspended fittings for the best possible light comfort. We have created unique variants to meet the different needs in these applications all to comply with EN Optus offers direct/indirect, whiteboard and surface variants each providing different lighting distributions therefore catering for all applications. A junction box for variable angles paired with system capabilities and infills creates the possibility to achieve wide ranging configurations. The Optus range is available in powder coated white and grey finish, as well as a new aluminium brushed finish that adds a touch of sophistication to any office environment. The availability of digital dimming (DSI) and SensaDigital versions as standard allows for simple lighting controls as well as the realisation of complex lighting projects with a single range. To complete the requirements of modern installations and meeting legislation 3-hour SelfTest/addressable test (EM Pro Z module) lighting facility are available. The SelfTest/addressable test emergency versions allows for easy compliance control and documentation, reducing the administrative burden. In stand-alone mode the emergency function is tested and identified by a built in LED indicator. In the addressable test mode the luminaire will feed back to a central control system the status and result of the function test. Direct/Indirect Brushed Aluminium finish Surface Powder coated Grey Whiteboard Powder coated White 3

4 4

5 Performance, Efficiency and Comfort (PEC) for a better lit environment Optus IV evokes the spirit of Thorn Lighting s dynamic, results-orientated PEC programme The programme is based on the principle that Performance, Efficiency and Comfort determine the effectiveness of lighting, its impact on the people using it, and its impact on the natural environment. Optus IV delivers the right light on the right place at the right time. Performance: providing the best visual effectiveness The link between illumination and task performance has been established for both education and office environments. Good visual effectiveness helps facility users to concentrate better and learn or work more efficiently. The Optus range combines the benefits of T16 lamps for good colour rendering with an improved optical design for different needs and LORs of up to 90%. Its light distribution combines illumination of the horizontal plane with glare free vertical illumination, ensuring good modelling of people and objects within a space. The result is efficient lighting schemes that meet task and uniformity requirements for different applications. This permits installing the Optus family throughout buildings and projects for a harmonised and modern look. The users will benefit from good lighting and be able to carry out their various tasks under optimal illumination conditions, increasing productivity and wellbeing. Efficiency: conserving energy and effort, reducing CO 2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain Lighting accounts for a significant part of European electricity consumption. Efficient lighting will reduce energy consumption and resource utilisation, and thus help protect the environment. The high LOR ratings of the Optus range ensure that electricity is converted as efficiently as possible into usable light resulting in Efficacy Scores of 80+ luminaire-lumens/circuit watt. Therefore fewer luminaires are required to achieve the prescribed illumination levels, saving both energy and material resources. High frequency ballasts reduce the total circuit watts of the installation. Digital dimming options allow for lighting controls such as SensaDigital, daylight linking or complete site automation. As a result, Optus installations can be set up to provide artificial light only when and where needed, reducing power consumption and unnecessary light. This helps the building tenant comply with regulations and save money. Comfort: giving people satisfaction and stimulation The ergonomics of Optus start with the installation. The new suspension system allows for flexible ceiling mounting of the suspended and surface versions. The optical design allows for upward light and a balanced brightness, which reduces visual fatigue caused by glare. The classic design integrates well into an aesthetic atmosphere generating a stimulating ambience that maintains high levels of interest. The high frequency ballast and dimming option as well as optional controls provide flicker free light only when needed, supporting the trend towards environmentally friendly office lighting and allowing the users to feel good about their surrounding. At the same time, digital dimmable installations allow a building user to adjust lighting to the requirements of specific tasks as well as to build-in light reserves for performance stimulation and the needs of an aging workforce. 5

6 School In classrooms we recommend to have a combination of indirect and direct light When using suspended Optus IV DI 1 x 35W DSB together with Optus IV Whiteboard 1 x 35W RAS you get comfortable light with very balanced contrasts between light on the working plane, walls and ceiling. The running costs are very low. Only 2.08W/m 2 /100lx is installed. The luminaire is suspended at 0.5m with reflective values of 80/50/20 and a maintenance factor of m 0.00m Position of surface in room: Working plane with 0.500m Boundary Zone Marked point: (0.500m, 0.500m, 0.750m) Grid: 9 x 9 Points E av [lx] E min [lx] E max [lx] U o E min /E max 0.00m 7.10m Workplane: lx Office In single person offices we recommend to have a work place orientated luminaire for best comfort and performance In this room we have used an Optus IV DI 2 x 35W suspended just above the work place. The luminaire is suspended 0.5m from the ceiling. The illuminance is over 600 lux E av on the task area, with a uniformity of over 0.7. A well illuminated ceiling increases optical comfort. The total effect is only 2.64W/m 2 /100lx. Reflective values of 80/50/20 and a maintenance factor of m Position of surface in room: Working plane with 0.200m Boundary Zone Marked point: (0.200m, 0.200m, 0.760m) Grid: 15 x 10 Points 0m E av [lx] E min [lx] E max [lx] U o E min /E max 0m 4.00m Workplane: lx 6

7 Thorn Lighting Controls: Reduce lighting costs in a wide variety of working environments Even the simplest lighting control equipment can help to minimise wasteful use of light and make the maximum use of natural light in line with the latest European recommendations and standards. Low installation costs and built-in flexibility ensure that lighting control can be applied in a wide range of different working and leisure environments. 2.5m Maintenance Illuminance in accordance with age and soiling of lamp Required normal illumuminance Energy savings through dimming of surplus capacity HFS HFD 6.0m Illuminance HFD HFD Maintenance interval SensaDigital head SensaDigital detection pattern SensaDigital saves the surplus capacity One SensaDigital can control 4 fittings Basic On/off Solution The most basic form of lighting control is the simple wall On/ Off switch. It is however possible to introduce a level of simple automation even when the need is only to provide a switched mains supply to a luminaire: A presence detector will register room occupancy and switch lights on. As soon as the room is vacated lights will be switched off after a pre-set time out period. Presence detectors are available with built-in photocell for additional daylight-link with switching response, different coverage s and detection patterns, in passive infrared or microwave technology, and for ceiling recess, ceiling surface or wall mounting. Switchlite products are designed to fulfill these functions. Manual Dimming Brightening or dimming the output from luminaires can control light levels. Any Optus IV dimmable luminaire can be controlled manually: Automatic Controls Automatic control products allow the lighting level to be pre-programmed and then automatically dimmed or switched off in response to movement or changes in natural light levels. Sensa Digital is an ideal system for small offices and the presence detectors can be recessed, surface mounted or integrated into luminaires (HFS versions). The system can be programmed using a remote programming tool and the handheld controller gives users the opportunity to set their own local lighting preferences. For more versatile linkage of dimmable luminaire groups to daylight in one room applications, SensaModular (available autumn 2009) allows for: Scene Setting In multi function rooms such as lecture theatres, conference rooms, board rooms, training facilities or representative offices, groups of luminaires can be set to pre-programmed levels to create individual scenes to suit the different uses. Different Thorn Indoor Lighting Controls systems like SensaModular (available autumn 2009) and SensaLink, provide scene plates and enable user friendly but advanced lighting control options. They are used in conjunction with the dimmable versions of Optus IV. Please ask for our Lighting Controls brochure. A single group of luminaires, incorporating up to 20 DSI ballasts, can be controlled via a simple wall mounted DSI rotary dimmer, RotaryDIM. SensaModular (available autumn 2009) is a modular controls portfolio that can dim or brighten two or three groups of digitally (DSI or DALI) controlled luminaires, using standard momentary action switches. look-down multi-sensor heads per group, ideal for open plan offices, allowing for building compliance to EN 15193; multi-sensor head per one room application, ideal for single offices; look-out photocell head one per room application, ideal for classrooms and sport halls, but especially with ceiling heights above 3m 7

8 Optus IV Direct/Indirect The best light distribution to suit a variety of applications Optus IV Direct/Indirect is suitable for both office and school applications Wire suspension or optional rod suspension Continuous line installation possible without accessory Precise glare control creates comfortable lighting environment Satinbrite louvres to meet most requirements Digital dimming (DSI) available as standard for lighting controls Lamps 28, 35, 49, 54W T16 (FDH) linear fluorescent. Cap: G5 Materials/Finish Body: extruded aluminium, brushed aluminium finish or powder coated, titan grey or matt white End caps: die-cast zinc powder coated, titan grey or matt white Louvre: Satinbrite anodised aluminium. Installation/Mounting Fixed output versions delivered with 2.6m 3 x 0.75mm 2 non halogen cable. Dimmable version (HFD) delivered with 5 x 0.75mm 2 non halogen cable. HF E3TX versions are delivered with 2.6m 6 x 0.75mm 2 non halogen cable. HFD E3TX versions are delivered with one 2.6m 6 x 0.75mm 2 and one separate 2.6m 2 x 0.75mm 2 non halogen cable. Pre-mounted Quick Lock wire suspension kit (1500mm) included. Optional suspension rods available. Standards Designed and manufactured to comply with EN Emergency versions with EN Class I electrical 850 fire retardant IP20 Specification To specify state: Suspended aluminium luminaire for 28-54W T16 (T5) lamps with metal end caps As Thorn Optus IV Direct/Indirect. SensaDigital (integral to the luminaire) versions available as standard. SensaDigital allows for daylight and presence control reducing power consumption 3-hour SelfTest/Addressable emergency versions available as standard junction box permits wide ranging configuration permutations degree junction box 8

9 Optus IV Surface A true alternative to recessed lighting Surface mounted providing direct light (can be suspended using optional wire or rod suspension as luminaire is balanced) Continuous line installation possible without accessories Excellent glare control creates comfortable lighting environment Satinbrite louvres to meet most requirements Digital dimming (DSI) available as standard for lighting controls SensaDigital versions available as standard. SensaDigital allows for daylight and presence control reducing power consumption 3-hour SelfTest/Addressable emergency versions available as standard Lamps 28, 35, 49, 54, 80W T16 (FDH) linear fluorescent. Cap: G5 Materials/Finish Body: extruded aluminium, brushed aluminium finish or powder coated, titan grey or matt white End caps: die-cast zinc, powder coated, titan grey or matt white Louvre: Satinbrite anodised aluminium. Installation/Mounting 3/5/8-pole piano key terminal block and cable clamp. Key holes for mounting Optus IV Surface: 28/54W 1000mm, 35/49/80W 1300mm. Standards Designed and manufactured to comply with EN Emergency versions with EN Class I electrical 850 fire retardant IP20 Specification To specify state: Surface mounted aluminium luminaire for 28-80W T16 (T5) lamps with metal end caps. As Thorn Optus IV Surface. 9

10 Optus IV Whiteboard Asymmetric light distribution Excellent lighting technique (I max >900cd/1000lm) provides high luminance on the whiteboard with no glare Use brackets or console kit to achieve the best lighting performance. Wire suspension or surface mounting also possible with optional accessory (luminaire is balanced) not intended for system mounting. Digital dimming (DSI) available as standard for lighting controls 3-hour SelfTest/Addressable emergency versions available as standard Lamps 28, 35, 49W T16 (T5) (FDH) linear fluorescent. Cap: G5 Materials/Finish Body: extruded aluminium, powder coated, titan grey or matt white End caps: die-cast zinc powder coated, titan grey or matt white Louvre: anodised aluminium, asymmetric Satinbrite with flat cross lamellas Installation/Mounting 3/5/8-pole piano key terminal block and cable clamp. Mounting Optus IV Whiteboard, with wall brackets/console kit, one kit per fitting to be ordered separately. Flexible distance: 28W C-C mm, 35/49W C-C mm. To ensure correct mounting place brackets on wall flush with top of whiteboard. Alternative mounting option with wire suspension kit (to be ordered separately) or direct on the ceiling. 28W C-C 1150mm 35/49W C-C1450mm. Standards Designed and manufactured to comply with EN Emergency versions with EN Class I electrical 850 fire retardant IP20 Specification To specify state: Asymmetric aluminium luminaire >900cd/1000lm for 28-49W T16 (T5) lamps with metal end caps. As Thorn Optus IV Whiteboard. 10

11 Ordering guides Dimensions Photometric Data 28W/54W W/49W W/54W W/49W Cd/1000lm Optus IV DI DSB Lamp: 2 x 28W T16 ULOR: 0.39 DLOR: 0.54 LOR: 0.93 Ordering Guide Optus IV Direct/Indirect Lamps to be ordered separately. Wire kit included. Description Ilcos Code Socket Weight (Kg) SAP Code Grey SAP Code White High Frequency OPTUS IV DI 1x28W HF DSB ML FDH G OPTUS IV DI 1x35W HF DSB ML FDH G OPTUS IV DI 1x49W HF DSB ML FDH G OPTUS IV DI 1x54W HF DSB ML FDH G OPTUS IV DI 2x28W HF DSB ML FDH G OPTUS IV DI 2x35W HF DSB ML FDH G OPTUS IV DI 2x49W HF DSB ML FDH G OPTUS IV DI 2x54W HF DSB ML FDH G High Frequency Emergency OPTUS IV DI 1x28W HF DSB E3TX ML FDH G OPTUS IV DI 1x35W HF DSB E3TX ML FDH G OPTUS IV DI 1x49W HF DSB E3TX ML FDH G OPTUS IV DI 1x54W HF DSB E3TX ML FDH G OPTUS IV DI 2x28W HF DSB E3TX ML FDH G OPTUS IV DI 2x35W HF DSB E3TX ML FDH G OPTUS IV DI 2x49W HF DSB E3TX ML FDH G OPTUS IV DI 2x54W HF DSB E3TX ML FDH G High Frequency DSI Dimmable OPTUS IV DI 1x28W HFD DSB ML FDH G OPTUS IV DI 1x35W HFD DSB ML FDH G OPTUS IV DI 1x49W HFD DSB ML FDH G OPTUS IV DI 1x54W HFD DSB ML FDH G OPTUS IV DI 2x28W HFD DSB ML FDH G OPTUS IV DI 2x35W HFD DSB ML FDH G OPTUS IV DI 2x49W HFD DSB ML FDH G OPTUS IV DI 2x54W HFD DSB ML FDH G High Frequency DSI Dimmable Emergency OPTUS IV DI 1x28W HFD DSB E3TX ML FDH G OPTUS IV DI 1x35W HFD DSB E3TX ML FDH G OPTUS IV DI 1x49W HFD DSB E3TX ML FDH G OPTUS IV DI 1x54W HFD DSB E3TX ML FDH G OPTUS IV DI 2x28W HFD DSB E3TX ML FDH G OPTUS IV DI 2x35W HFD DSB E3TX ML FDH G OPTUS IV DI 2x49W HFD DSB E3TX ML FDH G OPTUS IV DI 2x54W HFD DSB E3TX ML FDH G High Frequency Sensa Dimmable OPTUS IV DI 1x28W HFS DSB ML FDH G OPTUS IV DI 1x35W HFS DSB ML FDH G OPTUS IV DI 1x49W HFS DSB ML FDH G OPTUS IV DI 1x54W HFS DSB ML FDH G OPTUS IV DI 2x28W HFS DSB ML FDH G OPTUS IV DI 2x35W HFS DSB ML FDH G OPTUS IV DI 2x49W HFS DSB ML FDH G OPTUS IV DI 2x54W HFS DSB ML FDH G HF - High Frequency, HFD - High Frequency DSI Dimmable, HFS - High Frequency Sensa Dimmable, DI - Direct/Indrect, ML - Mains Lead, DSB - Direct Satinbrite Louvre, E3TX - 3hr Emergency with Self Test or Addressable Test, WHI - White, GRY - Grey Green Eco Liners represent products held in stock and have been photometrically enhanced to promote sustainability 11

12 Ordering guides Dimensions Photometric Data W/54W /49/80W W/54W /49/80W cd/1000lm T 320 A 30 0 Optus IV D / DSB Lamp: 2 x 28W T16 ULOR: 0.0 DLOR: 0.66 LOR: Ordering Guide Optus IV Surface Lamps to be ordered separately. Description Ilcos Code Socket Weight (Kg) SAP Code Grey SAP Code White High Frequency OPTUS IV D 1x28W HF DSB FDH G OPTUS IV D 1x35W HF DSB FDH G OPTUS IV D 1x49W HF DSB FDH G OPTUS IV D 1x54W HF DSB FDH G OPTUS IV D 2x28W HF DSB FDH G OPTUS IV D 2x35W HF DSB FDH G OPTUS IV D 2x49W HF DSB FDH G OPTUS IV D 2x54W HF DSB FDH G High Frequency Emergency OPTUS IV D 1x28W HF DSB E3TX FDH G OPTUS IV D 1x35W HF DSB E3TX FDH G OPTUS IV D 1x49W HF DSB E3TX FDH G OPTUS IV D 1x54W HF DSB E3TX FDH G OPTUS IV D 2x28W HF DSB E3TX FDH G OPTUS IV D 2x35W HF DSB E3TX FDH G OPTUS IV D 2x49W HF DSB E3TX FDH G OPTUS IV D 2x54W HF DSB E3TX FDH G High Frequency DSI Dimmable OPTUS IV D 1x28W HFD DSB FDH G OPTUS IV D 1x35W HFD DSB FDH G OPTUS IV D 1x49W HFD DSB FDH G OPTUS IV D 1x54W HFD DSB FDH G OPTUS IV D 2x28W HFD DSB FDH G OPTUS IV D 2x35W HFD DSB FDH G OPTUS IV D 2X49W HFD DSB FDH G OPTUS IV D 2x54W HFD DSB FDH G High Frequency DSI Dimmable Emergency OPTUS IV D 1x28W HFD DSB E3TX FDH G OPTUS IV D 1x35W HFD DSB E3TX FDH G OPTUS IV D 1x49W HFD DSB E3TX FDH G OPTUS IV D 1x54W HFD DSB E3TX FDH G OPTUS IV D 2x28W HFD DSB E3TX FDH G OPTUS IV D 2x35W HFD DSB E3TX FDH G OPTUS IV D 2x49W HFD DSB E3TX FDH G OPTUS IV D 2x54W HFD DSB E3TX FDH G Direct High Frequency Sensa OPTUS IV D 1x28W HFS DSB FDH G OPTUS IV D 1x35W HFS DSB FDH G OPTUS IV D 1x49W HFS DSB FDH G OPTUS IV D 1x54W HFS DSB FDH G OPTUS IV D 2x28W HFS DSB FDH G OPTUS IV D 2x35W HFS DSB FDH G OPTUS IV D 2x49W HFS DSB FDH G OPTUS IV D 2x54W HFS DSB FDH G HF - High Frequency, HFD - High Frequency DSI Dimmable, HFS - High Frequency Sensa Dimmable, E3TX - 3hr Emergency with Self Test or Addressable Test, D - Direct, DSB - Direct Satinbrite Louvre, WHI - White, GRY - Grey, Green Eco Liners represent products held in stock and have been photometrically enhanced to promote sustainability 12

13 Ordering Guide Optus IV Brushed Aluminium Wire Kits included in Direct/Indirect versions. Please see previous pages for photometric data. Description Ilcos Code Socket Weight (Kg) SAP Code Direct/Indirect High Frequency OPTUS IV DI 1x28W HF ALP DSB ML FDH G OPTUS IV DI 1x35W HF ALP DSB ML FDH G OPTUS IV DI 2x28W HF ALP DSB ML FDH G OPTUS IV DI 2x35W HF ALP DSB ML FDH G Direct/Indirect High Frequency Emergency OPTUS IV DI 1x28W HF ALP DSB E3TX ML FDH G OPTUS IV DI 1x35W HF ALP DSB E3TX ML FDH G OPTUS IV DI 2x28W HF ALP DSB E3TX ML FDH G OPTUS IV DI 2x35W HF ALP DSB E3TX ML FDH G Direct/Indirect High Frequency Dimmable OPTUS IV DI 1x28W HFD ALP DSB ML FDH G OPTUS IV DI 1x35W HFD ALP DSB ML FDH G OPTUS IV DI 2x28W HFD ALP DSB ML FDH G OPTUS IV DI 2x35W HFD ALP DSB ML FDH G Direct/Indirect High Frequency Dimmable Emergency OPTUS IV DI 1x28W HFD ALP DSB E3TX ML FDH G OPTUS IV DI 1x35W HFD ALP DSB E3TX ML FDH G OPTUS IV DI 2x28W HFD ALP DSB E3TX ML FDH G OPTUS IV DI 2x35W HFD ALP DSB E3TX ML FDH G Direct/Indirect High Frequency Sensa OPTUS IV DI 1x28W HFS ALP DSB ML FDH G OPTUS IV DI 1x35W HFS ALP DSB ML FDH G OPTUS IV DI 2x28W HFS ALP DSB ML FDH G OPTUS IV DI 2x35W HFS ALP DSB ML FDH G Direct High Frequency OPTUS IV D 1x28W HF ALP DSB FDH G OPTUS IV D 1x35W HF ALP DSB FDH G OPTUS IV D 2x28W HF ALP DSB FDH G OPTUS IV D 2x35W HF ALP DSB FDH G Direct High Frequency Emergency OPTUS IV D 1x28W HF ALP DSB E3TX FDH G OPTUS IV D 1x35W HF ALP DSB E3TX FDH G OPTUS IV D 2x28W HF ALP DSB E3TX FDH G OPTUS IV D 2x35W HF ALP DSB E3TX FDH G Direct High Frequency Dimmable OPTUS IV D 1x28W HFD ALP DSB FDH G OPTUS IV D 1x35W HFD ALP DSB FDH G OPTUS IV D 2x28W HFD ALP DSB FDH G OPTUS IV D 2x35W HFD ALP DSB FDH G Direct High Frequency Dimmable Emergency OPTUS IV D 1x28W HFD ALP DSB E3TX FDH G OPTUS IV D 1x35W HFD ALP DSB E3TX FDH G OPTUS IV D 2x28W HFD ALP DSB E3TX FDH G OPTUS IV D 2x35W HFD ALP DSB E3TX FDH G Direct High Frequency Sensa OPTUS IV D 1x28W HFS ALP DSB FDH G OPTUS IV D 1x35W HFS ALP DSB FDH G OPTUS IV D 2x28W HFS ALP DSB FDH G OPTUS IV D 2x35W HFS ALP DSB FDH G HF - High Frequency, HFD - High Frequency DSI Dimmable, HFS - High Frequency Sensa, DI - Direct/Indrect, D - Direct, ML - Mains Lead, DSB - Direct Satinbrite Louvre, E3TX - 3hr Emergency with Self Test or Addressable Test, ALP - Aluminium Profile, WHI - White, GRY - Grey 61 28W W/49W W W/49W W W/49W cd/1000lm T A OPTUS IV WHITEBOARD Lamp: 1 x 49W T16 ULOR: 0.0 DLOR: 0.93 LOR: Ordering Guide Optus IV Whiteboard Lamps to be ordered separately. Description Ilcos Code Socket Weight (Kg) SAP Code Grey SAP Code White High Frequency OPTUS IV WHITEBOARD 1X28W HF RAS FDH G OPTUS IV WHITEBOARD 1X35W HF RAS FDH G OPTUS IV WHITEBOARD 1X49W HF RAS FDH G Accessories OPTUS IV WHITEBOARD BRACKET KIT OPTUS IV WHITEBOARD CONSOLE KIT HF - High Frequency, RAS - Asymmetric Louvre, WHI - White, GRY - Grey 13

14 Accessories 1. Blank Infill 2. Junction Box and Wire Suspension 3. End Cap Connector 4. Pendant Rod Suspension Kit 5. Ceiling Kit Canopy 6. Ceiling Kit Decor 7. Suspension Kit Whiteboard 8. Suspension Kit D/DI 9. Whiteboard Bracket Kit 10. Whiteboard Console Kit 11. SensaDigital Controller 12. SensaDigital Programming Tool Ordering Guide Optus IV Accessories Description Weight (Kg) SAP Code Grey SAP Code White OPTUS IV INFILL L=300MM OPTUS IV INFILL L=600MM OPTUS IV INFILL L=900MM OPTUS IV INFILL L=1200MM OPTUS IV JUNCTION BOX WIRE SUSPENSION FOR JUNCTION BOX OPTUS IV END CAP CONNECTOR OPTUS IV PENDANT ROD KIT 150MM CEILING KIT CANOPY 80x35mm WHI CEILING KIT DECOR QUICK LOCK SUSPENSION KIT - FOR WHITEBOARD QUICK LOCK SUSPENSION KIT OPTUS IV WHITEBOARD BRACKET KIT OPTUS IV WHITEBOARD CONSOLE KIT GRY SENSA DIGITAL HANDHELD CONTROLLER SENSA DIGITAL PROGRAMMING TOOL Picture 14

15 Installation Installation Guide, System Mounting for Optus IV D, DI and Whiteboard versions Remove the louvre 2. Remove the endcap of fitting 1 and 2 by loosening 2 screws on each fitting 3. Loosen the screws on the brackets of fitting 1 and 2 3a. Remove the bracket from fitting 2 completely, keep the screws 4. Push out bracket of fitting 1 for 30mm 5. Fasten the screws on the bracket in fitting 1 6. Feed power cord from fitting 2 into fitting 1 up to the terminal block 7a. Slide fitting 2 onto bracket of fitting 1 7b. Fasten screw on bracket inside fitting 2 8. Connect power cord of fitting 2 to terminal block of fitting 1 9. Mount lamps as specified 10. Replace louvre by pushing in springs at ends 11. Attach wire to ceiling using appropriate fastening method 12. Attach wire to quick lock of fitting 13. Connect electrically 3a 4 5 Installation Guide, Junction Box for Optus IV D, DI and Whiteboard versions 6 L E N L1L2 N E L1 L2 N D1 D2 200mm 8 N E L1 L2 8 D1 D2 E1 E2 7a 7b See above except the following: 4. Push out bracket of the fitting for 14mm 6a. Assemble End Cap (SW) Connector and mount to fitting 6b. Cut knock-out in Junction Box at appropriate angle for cable feeding 6c. Mount Junction Box to End Cap Connector at appropriate angle and fasten all screws properly 7. Feed power cord through End Cap Connector and Junction Box to next fitting 14. Use at least one Quick Lock Suspension Kit, , per fitting when using the Wire Suspension for the Junction Box, Shown are: 2x Optus IV D, DI, GRY 2x Optus IV End Cap Connector GRY, x Optus IV Junction Box, &

16 Lighting people and places Thorn Lighting Limited UK Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE UK Sales desk - Orders/Stock Enquiries Tel: Fax: Ireland Thorn Lighting (Ireland) Limited Century House Harolds Cross Road Dublin 6W Tel: (353) Fax: (353) dublinsales@thornlighting.com Thorn Olympics Sports Lighting Team Tel: olympics.team@thornlighting.com Spare Parts Tel: Fax: spares@thornlighting.com Technical Support Tel: Fax: technical@thornlighting.com Brochureline Answering Service Brochures on specific products/ranges Tel: Fax: brochures.uk@thornlighting.com Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated. Publication No: 439 (GB) Publication Date: 07/09 Member of The Lighting Industry Federation ISO 9001:2000 Reg: 2916/0 Manufacturing & Distribution