Optilux LED Low Bay and High Bay. Optilux CFL Low Bay. Low Bay. High Bay. IP65 High Bay

Transcription

1 324 Optilux LED Low Bay and High Bay 327 Optilux CFL Low Bay 330 Low Bay 332 High Bay 333 IP65 High Bay 334 Architectural High Bay and Pendants 336

2 325 PIR Sensors 338 Pre-Wired T8 Non Corrosive For LED Tubes and LED T8 Tubes 339 Stormloc LED Non-Corrosive 340 T5 Non-Corrosive 342 T8 Non-Corrosive 343 T5 Fluorescent Battens and Accessories 344 T8 Fluorescent Battens and Accessories 346 Industrial

3 326 Designed to Deliver

4 327 Low Bay and High Bay First fit steel mounting bracket with surface, besa and suspended connection points for all types of installation requirements Custom designed die-cast aluminium anodized heatsink for optimum thermal management LED Board utilises advanced Luxeon M Chips Dedicated LED array for integral 3 hour emergency PMMA Lens optimises output and distribution for both flood and racking installations Easy access gear box c/w Wieland plug and socket High specification branded driver High gloss polycarbonate reflector for increased light output Compact and robust steel fabricated housing with powder coat paint finish Three integral sensor options including Cold Store Six Delivered Lumen Packages from 7750lm to 31400lm

5 Optilux LED Low Bay and High Bay Supplied c/w Integral Driver 5 YEAR WARRANTY UK Ansell Designed Developed 328 Bottom View Compact LED industrial, commercial and retail low bay and high bay applications Up to 63% energy saving compared to T5 fluorescent Instant light output and unlimited switching Option of six lumen delivered packages ranging from 7,750lm to 31,400lm Integral emergency options (excluding AOPLED6) 7mm and 12mm diameter holes allows variable options of fixing by surface mounting or suspension with drop rods and chain/wire Mild Steel powder coat construction with die-cast aluminium heatsink for optimal thermal performance Top View 405 Code Lamp Description AOPLED1 LED 83W Optilux LED Lowbay AOPLED2 LED 110W Optilux LED Lowbay AOPLED3 LED 129W Optilux LED Lowbay AOPLED4 LED 166W Optilux LED Highbay AOPLED5 LED 193W Optilux LED Highbay AOPLED6 LED 290W Optilux LED Highbay Options Accessories /RL Racking Lens /M3 Emergency (Not available for AOPLED6) /SEN1 Highbay Sensor Fixed Output c/w Photocell /SEN1/M3 Emergency Highbay Sensor Fixed Output c/w Photocell /SEN3 Highbay Sensor 1-10V Dimming c/w Photocell /SEN3/M3 Emergency Highbay Sensor 1-10V Dimming c/w Photocell /CS Highbay Sensor Cold Store PIR Presence Detector with High In-Rush Relay (-30 ) /CS/RL Highbay Sensor Cold Store PIR Presence Detector with High In-Rush Relay (-30 ) c/w Racking Lens AOPLED/PD 3mm Polycarbonate Diffuser AOPLED/OPS 0.25mm Low Glare Opal Sheet 5.50 (Please note: AOPLED/PD must be purchased for use with this accessory) AOPLED/WG Protective Wire Guard LED Information Flood Lens Racking Lens Lumens Delivered Lm/W Lm/W AOPLED AOPLED AOPLED AOPLED AOPLED AOPLED CRI Ra 80 CCT 4000K Input 240V IP20

6 329 Outstanding optical performance with a choice of open area or racking aisle lenses Plug and Play connection for all model types - no access required to internal housing Three sensor options for presence detection, presence detection with daylight dimming and coldstore Standard sensors suitable for operation in ambient temperatures of -0 c to +40 c, cold store sensor suitable for temperatures of -30 c to +35 c Flood Lens Plug and Play Racking Lens Sensor Close Up Optional robust wire guard protection for sports hall applications Optional opal sheet for reduced glare Wire Guard Option Polycarbonate Diffuser and Low Glare Film Option Warrington: +44 (0) Belfast: +44 (0)

7 Opti-Lux 2 PL-L Low Energy Low Bay Supplied Less Lamp High HF Frequency UK Ansell Designed Developed 330 Highly efficient, low energy fitting with Miro 4 polished reflector for commercial and industrial applications Optimum performance allows for reduced luminaire quantities Powder coated steel body fitted Suitable for applications with mounting heights in excess of 4 metres Supplied fixings allow for various installation methods On-site commissioning recommended for all installations incorporating sensors Wieland ST18 Connection as standard C A Options Code Lamp Description A* B C AO455PL PL-L 4 x 55W A0655PL PL-L 6 x 55W AOCONTROLLER Sensor Hand Controller POA AOCOMMISSION On-site Commissioning per day POA * Add 100mm body length for Sensor Models /M3 Emergency /HFDD Digital Dimming /HFDD/M3 Digital Dimming Emergency /SEN1 Presence Detector /SEN1/M3 Emergency and Presence Detector /SEN3 Presence Detector and Daylight Dimming /SEN3/M3 Emergency and Presence Detector and Daylight Dimming B Sensor Information Programmable PIR Suitable for mounting to a maximum height of 16 metres 360 movement detection Ideal for warehouse racking Programmable via infrared from ground level Available with regulating photocell Accessories Comprehensive Range of Polycarbonate Diffusers and Wire Guards available for all models HF HFDD IP20

8 UK Ansell Designed Developed HF High Frequency Opti-Lux 2 T5 Low Energy Low Bay Supplied Less Lamp 331 Highly efficient, low energy fitting with Miro 4 polished reflector for commercial and industrial applications Optimum performance allows for reduced luminaire quantities Powder coated steel body fitted Suitable for applications with mounting heights in excess of 4 metres Supplied fixings allow for various installation methods On-site commissioning recommended for all installations incorporating sensors Wieland ST18 Connection as standard Code Lamp Description A* B C AO349T5 T5-HO 3 x 49W AO354T5 T5-HO 3 x 54W AO380T5 T5 HO 3 x 80W AO449T5 T5 HO 4 x 49W AO454T5 T5 HO 4 x 54W A0480T5 T5-HO 4 x 80W A0680T5 T5-HO 6 x 80W AOCONTROLLER Sensor Hand Controller AOCOMMISSION On-site Commissioning per day POA POA * Add 100mm body length for Sensor Models Options /M3 Emergency /HFDD Digital Dimming to /HFDD/M3 Digital Dimming Emergency to C /SEN1 Presence Detector A /SEN1/M3 Emergency and Presence Detector /SEN3 Presence Detector and Daylight Dimming /SEN3/M3 Emergency and Presence Detector B and Daylight Dimming HF HFDD IP20 Accessories Comprehensive Range of Polycarbonate Diffusers and Wire Guards available for all models Warrington: +44 (0) Belfast: +44 (0)

9 Low Bay Supplied c/w Lamp UK Ansell Designed Developed 332 Industrial Lowbay with anodised high grade Aluminium reflector Optimum performance allows for reduced luminaire quantities Suitable for applications with mounting heights above 4 metres Multi-punched body for various installation methods B C A Code Lamp Description A B C ACTLBS250 SON-T 250W ACTLBS400 SON-T 400W ACTLBMH250 HQI-T 250W c/w glass ACTLBMH400 HQI-T 400W c/w glass Accessories ACTLBD Dished Diffuser ACTLBG Low Bay Glass 9.03 ACTLBWG Low Bay Wire Guard IP20

10 UK Ansell Designed Developed High Bay Supplied c/w Lamp and Aluminium Reflector 333 High Bay luminaire for industrial applications Metal Halide options fitted with open fixture lamps Optional 3 metre suspension kit Code Lamp Description AHBS250 SON-E 250W AHBS400 SON-E 400W AHBMH250 HQI-E 250W HQI (Open Fixture Lamp) AHBMH400 HQI-E 400W HQI (Open Fixture Lamp) Accessories AHBG High Bay Glass Attachment AHBWG High Bay Wire Guard IP20 ADHB/SK Suspension Kit Warrington: +44 (0) Belfast: +44 (0)

11 IP65 High Bay Supplied c/w Lamp, Refractor and Bottom Cover 334 Integral gear inside PBT housing with polycarbonate reflector and hinged cover Reflector, internally silvered for maximum efficiency Clear polycarbonate cover with clips to maintain ingress protection High-resistant P.B.T. reinforced housing. Gear Housing Cable gland PG11. Electromagnetic ballast, power factor correction capacitor and ignitor. Grey faceted polycarbonate refractor for greater lighting efficiency. Metallized interior surface with plasma-layer protection for long life. Protection screen in shock-resistant crystal clear polycarbonate. Polyamide G. F. 30% reinforced lock-clips. Code Lamp Description AHBMH250/IP65 HQI-E 250W AHBMH400/IP65 HQI-E 400W IP65

12 335

13 Deco High Bay Architectural Supplied c/w Lamp and Refractor High HF Frequency UK Ansell Designed Developed 336 High Bay luminaire for industrial applications Metal Halide options fitted with open fixture lamps Optional 3 metre suspension kit ADMH70 ADMH150 - ADPL2X42 ADMH250 ADMH400 Bottom Cover Suspension Kit Code Lamp Description ADMH70 HQI-E 70W (Open Fixture Lamp) ADMH150 HQI-E 150W (Open Fixture Lamp) /150 / 2 x 42W 250/400W ADMH250 HQI-E 250W (Open Fixture Lamp) ADMH400 HQI-E 400W (Open Fixture Lamp) ADPL2X42 PL-T 2 x 42W Options /HFDD Digital Dimming (2x42W only) (Excludes PL-T) Accessories ADHB/410/BC Bottom Cover for 70W, 150W and 2 x 42W Refractors ADHB/566/BC Bottom Cover for 250W and 400W Refractors ADHB/SK Suspension Kit HF HFDD IP20 PL-T Only

14 Verona Architectural Pendant c/w Suspension Kit and Refractor Supplied Less Lamp Integral housing with translucent polycarbonate refractor 4mm anti-dazzle tempered glass retained with techno-polymer clips Housing in techno-polymer with a silver paint finish Supplied c/w 2 metre suspension kit PLCE Option 60W Maximum size and wattage IP44 Code Lamp Description AVE27/PLCE E27 PLCE 60W Warrington: +44 (0) Belfast: +44 (0)

15 PIR Sensors 338 Programmable PIR Simple connection via any 20mm knock out Supplied with 500mm connection leads 360 movement detection Programmable via infrared from ground level Option of IP20 and IP65 versions Available with regulating photocell ASEN3 Please Note: ASEN3 and ASEN3/ IP65 Battens and Non Corrosives must be ordered with dimmable control gear to operate with this PIR regulating photocell sensor 29 M20 x LUMINAIRE Code Description ASEN1 PIR Presence Detector (Maximum Rating 2A) ASEN3 PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts) ASEN1/IP65 IP65 PIR Presence Detector (Maximum Rating 2A) ASEN3/IP65 IP65 PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts)

16 2 YEAR WARRANTY IP65 T8 Pre-Wired Non Corrosive For LED Tubes Non Corrosive supplied Less Control Gear and Lamp 339 Mains Voltage Non Corrosive for Ansell T8 LED Tubes Fixture supplied with lockable stainless steel clips as standard C D D B A IP65 T8 Pre-Wired Non Corrosive Code Lamp Description A B C D Clips ADP2 LED 1 x 600mm for LED Tube ADP4 LED 1 x 1200mm for LED Tube ADP5 LED 1 x 1500mm for LED Tube ADP2X2 LED 2 x 600mm for LED Tube ADP2X4 LED 2 x 1200mm for LED Tube ADP2X5 LED 2 x 1500mm for LED Tube Accessories ASEN1/IP65 *IP65 PIR Presence Detector (Maximum Rating 2A) *Presence Detectors for on-site installation via 20mm threaded connection Clear high output LED Tube provides up to 60% saving in energy consumption compared to fluorescent equivalent 30,000 hours average lifetime Non Dimmable T8 LED Tubes c/w Integral Driver LED Information Total (Watts) 10W 18W 22W Lumens Delivered 1050lm 2000lm 2350lm CRI Ra 70 CCT 4500K Input 240V Temp Range -30 to 50 T8 LED Tubes Code Lamp Description A10WLEDT8/CL LED 10W 600mm Clear A18WLEDT8/CL LED 18W 1200mm Clear A22WLEDT8/CL LED 22W 1500mm Clear IP20 Warrington: +44 (0) Belfast: +44 (0)

17 340 Stormloc IP65 LED Non-Corrosive Supplied c/w Integral Driver 3 YEAR WARRANTY Internal high performance optical lens UK Ansell Designed Developed Up to 48% energy saving compared to T8 fluorescent Light output exceeds performance of T8 and T5 fluorescent by up to 37% LED performance allows point for point replacement of existing fluorescent luminaires Internal linear Visiluxe optical lens for maximum performance and light distribution. Provides appearance of traditional fluorescent Instant light output with unlimited switching Unique luminaire fixing clip design allows option of mounting onto BESA box or directly onto ceiling surfaces Lockable heavy duty stainless steel clips supplied as standard for added safety and security Polycarbonate base and diffuser maximises durability and strength Self-test emergency as standard CorridorFUNCTION for dimmable microwave sensor models D D B C Code Lamp Description A B C D A ASLED4 LED 1 x 26W LED Information Options ASLED5 LED 1 x 36W ASLED6 LED 1 x 42W ASLED2X4 LED 2 x 26W ASLED2X5 LED 2 x 36W ASLED2X6 LED 2 x 42W /M3 Self Test Emergency /MWS Integral Microwave Sensor /DD LED Dimmable /DD/M3 LED Dimmable Self Test Emergency Total (Watts) 26W 36W 42W Lumens Delivered 2331lm 3303lm 3503lm Lm/W 82lm 85lm 81lm CRI Ra 80 CCT 4000K Input 240V 52W 72W 84W 4701lm 6542lm 7046lm 79lm 84lm 78lm /DD/MWS LED Dimmable Integral Microwave Sensor /DD/MWS/M3 LED Dimmable Integral Microwave Sensor Self Test Emergency DD M3 MWS IP65

18 341 Unique design of brackets for BESA box mounting or direct ceiling mounting UV stabilised polycarbonate base for durability and strength Heavy duty lockable stainless steel clips as standard driver (dimmable option available) Integral microwave sensor option Dedicated LED circuit for integral Self-Test emergency option Two fused terminal blocks for surge protection Aluminium gear tray for thermal management to maximise lifetime of LED array Latest LED chips for maximum perfomance and efficiency Visiluxe optical lens maximises performance and light distribution Optical lens securing end cap Provides appearance of traditional fluorescent Shockproof polycarbonate diffuser for high durability and strength

19 IP65 T5 Non Corrosive Supplied Less Lamp High HF Frequency 342 Surface mounted luminaire suitable for non-hazardous IP65 environments UV resistant and shockproof polycarbonate diffuser Grey polycarbonate body housing and stainless steel fixing clips Please Note: ASEN3 and ASEN3/IP65 Non Corrosives must be ordered with dimmable control gear to operate with this PIR regulating photocell sensor Code Lamp Description A B C D Clips ADP114/HF T5 HE 1 x 14W ADP128/HF T5 HE 1 x 28W ADP135/HF T5 HE 1 x 35W ADP149/HF T5 HO 1 x 49W ADP214/HF T5 HE 2 x 14W ADP228/HF T5 HE 2 x 28W ADP235/HF T5 HE 2 x 35W ADP249/HF T5 HO 2 x 49W Options /M3 Emergency (14W not available) /HFDD Digital Dimming (14W not available) /HFDD/M3 Digital Dimming Emergency (14W not available) D B D /MWS *Integral Microwave Sensor (Twin Fittings only) C Accessories *5 Metre maximum mounting height ASEN1/IP65 *IP65 PIR Presence Detector (Maximum Rating 2A) A ASEN3/IP65 *IP65 PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts) *Presence Detectors for on-site installation via 20mm threaded connection ADP/SSC/T5 Stainless Steel Clip 0.83 HF HFDD M3 IP65

20 HF High Frequency IP65 T8 Non Corrosive Supplied Less Lamp High Frequency control gear Grey polycarbonate body housing with clear diffuser and durable polycarbonate clips Supplied with fixing brackets for surface mounting. Design allows for fixing directly onto trunking Clip and hook assembly for suspension mounting included UV resistant and shockproof polycarbonate diffuser Stainless Steel fixing clips available for food industry applications 343 Please Note: ASEN3 and ASEN3/IP65 Non Corrosives must be ordered with dimmable control gear to operate with this PIR regulating photocell sensor Code Lamp Description A B C D Clips ADP118/HF T8 1 x 18W ADP136/HF T8 1 x 36W ADP158/HF T8 1 x 58W ADP170/HF T8 1 x 70W ADP218/HF T8 2 x 18W ADP236/HF T8 2 x 36W ADP258/HF T8 2 x 58W ADP270/HF T8 2 x 70W D B D Options /M3 Emergency (18W not available) /HFDD Digital Dimming (18W and 70W not available) C /HFDD/M3 Digital Dimming Emergency (18W and 70W not available) A HF HFDD M3 IP65 Accessories ASEN1/IP65 *IP65 PIR Presence Detector (Maximum Rating 2A) ASEN3/IP65 *IP65 PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts) *Presence Detectors for on-site installation via 20mm threaded connection ADP/SS/CLIP Stainless Steel Clip 0.69 Warrington: +44 (0) Belfast: +44 (0)

21 T5 Fluorescent Battens Supplied c/w Triphosphor Lamps High HF Frequency Energy efficient T5 battens and accessories Single and twin variants with High Frequency control gear Steel body construction with powder coated finish AB135/HF Please Note: ASEN3 Battens must be ordered with dimmable control gear to operate with this PIR regulating photocell sensor AB235/HF Code Lamp Description A B C D High Output AB154/HF T5 HO 1 x 54W AB149/HF T5 HO 1 x 49W AB180/HF T5 HO 1 x 80W AB254/HF T5 HO 2 x 54W AB249/HF T5 HO 2 x 49W AB280/HF T5 HO 2 x 80W D B D High Efficiency AB128/HF T5 HE 1 x 28W C AB135/HF T5 HE 1 x 35W HF AB228/HF T5 HE 2 x 28W M IP A AB235/HF T5 HE 2 x 35W Options /M3 Emergency /HFDD Digital Dimming (80W not available) /HFDD/M3 Digital Dimming Emergency (80W not available) Accessories ASEN1 *PIR Presence Detector (Maximum Rating 2A) ASEN3 *PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts) *Presence Detectors for on-site installation via 20mm threaded connection HF HFDD M3 IP20

22 T5 Fluorescent Batten Accessories for Single and Twin Fittings ABPD 111 Prismatic Diffuser 58 ABR 111 Trough Reflector 58 ABHRR High Rack Reflector Code Description Prismatic ABPD4 1200mm Diffusers ABPD5 1500mm Trough ABR4 1200mm Reflectors ABR5 1500mm High Rack ABHRR4/T5 1200mm Reflectors ABHRR5/T5 1500mm Wire guards for Trough Reflectors ABRWG4 ABRWG5 1200mm 1500mm

23 T8 High Frequency Fluorescent Battens Supplied c/w Triphosphor Lamps High HF Frequency 346 Steel body construction, with powder paint coat finish Full range of accessories including reflectors, diffusers and wire guards (see pages ) Please Note: ASEN3 Battens must be ordered with dimmable control gear to operate with this PIR regulating photocell sensor Code Lamp Description A B C D AB136/HF T8 1 x 36W D B D AB158/HF T8 1 x 58W C AB170/HF T8 1 x 70W AB236/HF T8 2 x 36W A AB258/HF T8 2 x 58W AB270/HF T8 2 x 70W Options /M3 Emergency /HFDD Digital Dimming (Maximum 58W) /HFDD/M3 Digital Dimming Emergency (Maximum 58W) Accessories ASEN1 *PIR Presence Detector (Maximum Rating 2A) ASEN3 *PIR /Regulating Photocell Detector (Maximum 4 Dimmable Ballasts) *Presence Detectors for on-site installation via 20mm threaded connection HF HFDD M3 IP20

24 T8 Fluorescent Battens Supplied c/w Triphosphor Lamps 347 Steel body construction, with powder paint coat finish Full range of accessories including reflectors, diffusers and wire guards (see pages ) Code Lamp Description A B C D AB118 T8 1 x 18W AB136 T8 1 x 36W AB158 T8 1 x 58W AB170 T8 1 x 70W AB218 T8 2 x 18W AB236 T8 2 x 36W AB258 T8 2 x 58W AB270 T8 2 x 70W M3 IP20 Options /M3 Emergency (18W not available) Warrington: +44 (0) Belfast: +44 (0)

25 T8 Fluorescent Batten Accessories 348 Opal Diffuser Single 154 Prismatic Diffuser Twin Code Description Opal Diffusers ABOD118 1 x 600mm 8.21 ABOD136 1 x 1200mm ABOD158 1 x 1500mm ABOD170 1 x 1800mm ABOD218 2 x 600mm ABOD236 2 x 1200mm ABOD258 2 x 1500mm ABOD270 2 x 1800mm Prismatic Diffusers ABPD118 1 x 600mm 8.21 ABPD136 1 x 1200mm ABPD158 1 x 1500mm ABPD170 1 x 1800mm ABPD218 2 x 600mm ABPD236 2 x 1200mm ABPD258 2 x 1500mm ABPD270 2 x 1800mm

26 T8 Fluorescent Batten Accessories for Single and Twin Fittings ABR Trough Reflector Angled Reflector ABAR 171 High Rack Reflector Wire guard for Trough Reflector 255 ABHRR Code Description 131 Trough Reflectors ABR mm ABR mm ABR mm ABRWG Angled Reflectors ABAR mm ABAR mm ABAR mm High Rack Reflectors ABHRR mm ABHRR mm Wire guards for Trough Reflectors ABRWG mm ABRWG mm ABRWG mm Warrington: +44 (0) Belfast: +44 (0)