Nightspot High performance floodlights for discharge lamps and LEDs

Transcription

1 Nightspot High performance floodlights for discharge lamps and LEDs Design: Roy Fleedwood The Nightspot series of floodlights comes in three sizes and with rotationally symmetrical reflectors: - Nightspot Mini for 20 and 35 Watt miniature metal halide lamps or LEDs - 2 further sizes for 35 / 70 Watt and 150 / 250 Watt metal halide lamps These floodlights offer efficient and precise light distribution characteristics. In combination with the range of internally fitted accessories, they are adaptable tools for architectural lighting. The glare shield accessory eliminates glare from scattered light. This gives the floodlights optimal glare control. 126 Nightspot

2 Nightspot Gobo Projector One part of the Nightspot range is the series of gobo projectors for the projection of designs and logos with fine edge definition. The optical system inside the projector can take a gobo (glass or metal) and a dichroic colour filter simultaneously. In addition to a series of standard gobos, individually designed gobos can also be supplied. The pattern or image in a defined file format can be used to create the gobo. Coloured projections can be achieved using dichroic colour filters or glass gobos. The framer makes it possible to have sharp edges around a 3 or 4 sided image. Design: Roy Fleetwood Nightspot 127

3 Nightspot Mini Nightspot Mini, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7 mm, spacing 77 x 9m, knuckle joint with 110 tilt range, swivel range 3, cable entry 7 m, for recessed or surface mounted cable, integral electronic ballast or transformer, supplied without lamp 77 Nightspot Mini 20 W, narrow beam black Philips CDM-Tm 20 W PGJ5 1.3 kg white silver grey 10 lm Ø 0,29 m Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m 3485lx 871lx 387lx 218lx 139lx black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W 10 lm Ø 0,29 m Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m 3485lx 871lx 387lx 218lx 139lx Nightspot Mini 35 W, narrow beam black Philips CDM-Tm 35 W PGJ5 1.4 kg white silver grey 00 lm Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m Ø 1,7 1742lx 774lx 436lx 279lx 194lx black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W 00 lm 891 Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m Ø 1,7 1742lx 774lx 436lx 279lx 194lx 1 Nightspot Mini, low voltage halogene 50 W, narrow beam black QR-CB 50 W GX kg white silver grey QR-CB 51 Spot 1182 lm Ø 0,1 Ø 0,3 Ø 0,5 92lx 23lx 1029lx Ø 0,71 m Ø 0,89 m 579lx 371lx m Luminaire with ribbed glass for linear beam spread Part number Lamp Beam angle γ Philips CDM-Tm 20/35 W General Electric CMH 20/35 W Osram HCI-TF 20/35 W QR-CB 50 W (narrow beam) C C lm ,9 m 0, 1, 802lx 201lx 1 m 00 lm ,7 m 0,7 m 3, 1,1 m 89lx 7,1 m 4, 1, 50lx 5, 1, 10,7 m 8,9 m lx 2,1 m 22lx , 401lx 0,7 m 3, 1, 100lx 5, 2,1 m 45lx 2, 25lx 3, lx 4, 11lx Nightspot Mini HIT-TC-CE HIT-TC-CE QR-CB

4 Nightspot Mini, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, 2 drilled holes Ø 7 mm, spacing 77 x 9m, knuckle joint with 110 tilt range, swivel range 3, cable entry 7 10mm, for recessed or surface mounted cable, integral electronic ballast or transformer, supplied without lamp Nightspot Mini 0 10 lm Ø 1,61 m 222lx Ø 3,2 55lx Ø 4,8 25lx Ø 6,4 14lx Ø 9lx Nightspot Mini 20 W, wide beam black Philips CDM-Tm 20 W PGJ5 1.3 kg white silver grey 10 lm Ø 1,61 m Ø 3,2 Ø 4,8 Ø 6,4 Ø black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W 222lx 55lx 25lx 14lx 9lx 0 00 lm Ø 1,61 m Ø 3,2 444lx 111lx Ø 4,8 49lx Ø 6,4 28lx Ø 18lx Nightspot Mini 35 W, wide beam black Philips CDM-Tm 35 W PGJ5 1.4 kg white silver grey 00 lm 893 Ø 1,61 m Ø 3,2 Ø 4,8 Ø 6,4 Ø black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W 444lx 111lx 49lx 28lx 18lx QR-CB 51 WFL 1012 lm Ø 2, 82 lx Ø 5, 20 lx Ø 8, 9 lx Ø 11,1 m 5 lx Ø 13,9 m 3 lx Nightspot Mini, low voltage halogen 50 W, wide beam black QR-CB 50W GX kg white silver grey 9 m 1 1 HIT-TC-CE HIT-TC-CE QR-CB Nightspot Mini 129

5 Nightspot Mini with wall arm Nightspot Mini with wall arm, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7mm, spacing 77 x 9m, knuckle joint with 110 tilt range, swivel range 3, cable entry 7 m, for recessed or surface mounted cable, integral electronic ballast or transformer, supplied without lamp 77 Nightspot Mini with wall arm 20 W, narrow beam black Philips CDM-Tm 20 W PGJ5 1.6 kg white silver grey lm black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W lm Nightspot Mini with wall arm 35 W, narrow beam black Philips CDM-Tm 35 W PGJ5 1.7 kg white silver grey lm black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W lm Nightspot Mini with wall arm, low voltage halogen 50 W, narrow beam black QR-CB 50W GX kg white silver grey lm QR-CB 51 Spot Luminaire with ribbed glass for linear beam spread Part number Lamp Beam angle γ C C Philips CDM-Tm 20/35 W General Electric CMH 20/35 W Osram HCI-TF 20/35 W QR-CB 50W (narrow beam) ,0 4, ,0 4,0 4, lm lm Nightspot Mini with wall arm HIT-TC-CE HIT-TC-CE QR-CB

6 Nightspot Mini with wall arm, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, wall box: 2 drilled holes Ø 7mm, spacing 77 x 9m, knuckle joint with 110 tilt range, swivel range 3, cable entry 7 m, for recessed or surface mounted cable, integral electronic ballast or transformer, supplied without lamp Nightspot Mini with wall arm lm Nightspot Mini with wall arm 20 W, wide beam black Philips CDM-Tm 20 W PGJ5 1.6 kg white silver grey lm black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W lm Nightspot Mini with wall arm 35 W, wide beam black Philips CDM-Tm 35 W PGJ5 1.7 kg white silver grey lm black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W , 1,0 m 1, lm QR-CB 51 WFL m Nightspot Mini with wall arm, low voltage halogen 50 W, wide beam black QR-CB 50 W GX kg white silver grey The luminaires with wall arm are also available without control gear and with separate control gear unit. HIT-TC-CE HIT-TC-CE QR-CB Nightspot Mini with wall arm 131

7 Nightspot Mini with earth spike Nightspot Mini with earth spike, narrow beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 Luminaire made of die cast aluminium, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, power supply (electronic ballast or transformer) with integral stainless steel earth spike, supplied without lamp 350 Nightspot Mini with earth spike 20 W, narrow beam black Philips CDM-Tm 20 W PGJ5 2.4 kg white silver grey 10 lm Ø 0,29 m Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m 3485lx 871lx 387lx 218lx 139lx black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W 10 lm Ø 0,29 m Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m 3485lx 871lx 387lx 218lx 139lx Nightspot Mini with earth spike 35 W, narrow beam black Philips CDM-Tm 35 W PGJ5 2.5 kg white silver grey 00 lm Ø 0,29 m Ø 0,59 m 6970lx 1742lx Ø 0,8 Ø 1,1 Ø 1,47 m 774lx 436lx 279lx black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W 00 lm 891 Ø 0,29 m Ø 0,59 m Ø 0,8 Ø 1,1 Ø 1,47 m 6970lx 1742lx 774lx 436lx 279lx Nightspot Mini with earth spike, low voltage halogen 50 W, narrow beam black QR-CB 50W GX kg white silver grey QR-CB 51 Spot 1182 lm Ø 0,3 Ø 0,71 m Ø 1,07 m Ø 1,4 23lx 579lx 257lx 145lx Ø 1,79 m 93lx Luminaire with ribbed glass for linear beam spread Part number Lamp Beam angle γ Philips CDM-Tm 20/35 W General Electric CMH 20/35 W Osram HCI-TF 20/35 W QR-CB 50 W (narrow beam) C C lm ,9 m 0, 1, 802lx 201lx 1 m 00 lm ,7 m 0,7 m 3, 1,1 m 89lx 7,1 m 4, 1, 50lx 5, 1, 10,7 m 8,9 m lx 2,1 m 22lx , 401lx 0,7 m 3, 1, 100lx 5, 2,1 m 45lx 2, 25lx 3, lx 4, 11lx Nightspot Mini with earth spike HIT-TC-CE HIT-TC-CE QR-CB

8 Nightspot Mini with earth spike, wide beam For ceramic metal halide lamps (HIT-TC-CE) and low voltage reflector lamps (QR-CB) protection class I, IP65, IK08 Luminaire made of die cast aluminium, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, power supply (electronic ballast or transformer) with integral stainless steel earth spike, supplied without lamp Nightspot Mini with earth spike 0 10 lm Ø 1,61 m 222lx Ø 3,2 55lx Ø 4,8 25lx Ø 6,4 14lx Ø 9lx Nightspot Mini with earth spike 20 W, wide beam black Philips CDM-Tm 20 W PGJ5 2.4 kg white silver grey 10 lm Ø 1,61 m Ø 3,2 Ø 4,8 Ø 6,4 Ø black General Electric GU kg white CMH 20 W/ silver grey Osram HCI-TF 20 W 222lx 55lx 25lx 14lx 9lx 0 00 lm Ø 1,61 m Ø 3,2 444lx 111lx Ø 4,8 49lx Ø 6,4 28lx Ø 18lx Nightspot Mini with earth spike 35 W, wide beam black Philips CDM-Tm 35 W PGJ5 2.5 kg white silver grey 00 lm 893 Ø 1,61 m Ø 3,2 Ø 4,8 Ø 6,4 Ø black General Electric GU kg white CMH 35 W/ silver grey Osram HCI-TF 35 W 444lx 111lx 49lx 28lx 18lx QR-CB 51 WFL 1012 lm Ø 2, 82 lx Ø 5, 20 lx Ø 8, 9 lx Ø 11,1 m 5 lx Ø 13,9 m 3 lx Nightspot Mini with earth spike, low voltage halogen 50 W, wide beam black QR-CB 50 W GX kg white silver grey 9 m 1 1 The earth spike is an integral part of the luminaire and ensures sturdy installation. HIT-TC-CE HIT-TC-CE QR-CB Nightspot Mini with earth spike 133

9 Nightspot Mini Nightspot Mini without control gear For ceramic metal halide lamps (HIT-TC-CE) protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, base can be rotated 3, 1 drilled hole Ø 6.m, knuckle joint with 110 tilt range, M12 cable entry, with 0.8 M cable H05RN-F3G1, separate control gear unit required, supplied without lamp 50 6,5 Nightspot Mini without control gear, narrow beam black Philips CDM-Tm PGJ5 0.7 kg white 20/35 W silver grey 10 lm Ø 0,2 Ø 0,3 Ø 0, 4263lx 1895lx 1066lx Ø 0,6 Ø 0,7 682lx 474lx black General Electric GU kg white CMH 20/35 W silver grey Osram HCI-TF 20/35 W 00 lm Ø 0,29 m Ø 0,4 Ø 0,59 m Ø 0,7 Ø 0,8 6970lx 98lx 1742lx 1115lx 774lx Luminaire with ribbed glass for linear beam spread Part number Lamp Beam angle γ Philips CDM-Tm 20/35 W General Electric CMH 20/35W Osram HCI-TF 20/35 W QR-CB 50 W (narrow beam) C C lm ,9 m 0, 1, 2,7 m 0,7 m 802lx 201lx 1 m 3, 1,1 m 89lx 4, 1, 50lx 5, 1, lx 2,1 m 22lx Nightspot Mini without control gear, wide beam black Philips CDM-Tm PGJ5 0.7 kg white 20/35 W silver grey 10 lm Ø 1,61 m 222lx Ø 2,41 m 99lx Ø 3,2 55lx Ø 4,0 36lx Ø 4,8 25lx black General Electric GU kg white CMH 20/35 W silver grey Osram HCI-TF 20/35 W 00 lm Ø 1,61 m Ø 2,41 m Ø 3,2 Ø 4,0 Ø 4,8 444lx 197lx 111lx 71lx 49lx Control gear unit Part number Colour Lamp black Philips CDM-Tm 20 W white silver grey black Philips CDM-Tm 35 W white silver grey black General Electric CMH 20 W white Osram HCI-TF 20 W silver grey black General Electric CMH 35 W white Osram HCI-TF 35 W silver grey 134 Nightspot Mini 95 7 HIT-TC-CE HIT-TC-CE

10 Nightspot Mini LED Variable light distribution using an additional optical lense. Equipped with 3 x 3 W high performance LEDs, thermal monitoring device, protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, base can be rotated 3, 1 drilled hole Ø 6.m, knuckle joint with 110 tilt range, with 0.8 M cable H05RN-F3G1, integral transformer and on-board driver Nightspot Mini LED 50 6, LED 340 lm Ø 0,4 8lx Ø 0,6 75lx Ø 0,8 42lx Ø 1,0 27lx Ø 1,2 19lx Nightspot Mini LED, narrow beam Part number* Colour Lamp Weight Beam angle γ black 3 x LED 3 W warm white 1.2 kg white silver grey LED 340 lm ,0 m 0, 3,1 m 28lx 4,1 m 0, 12lx 5,1 m 0,9 m 7lx 6,1 m 1,1 m 4lx 7, 1, 3lx 1, 2lx 7 m Nightspot Mini LED, linear beam spread Part number* Colour Lamp Weight Beam angle γ C C black 3 x LED 3 W warm white 1.2 kg white silver grey LED 340 lm S Ø 1,11 m 20lx Ø 1,6 9lx Ø 2,2 5lx Ø 2,77 m 3lx Ø 3,3 2lx Nightspot Mini LED, wide beam Part number* Colour Lamp Weight Beam angle γ black 3 x LED 3 W warm white 1.2 kg white silver grey *These luminaires are also available with neutral white or monochrome coloured LEDs (amber, blue, red, green) upon request. Light source LED, replacement modules available Nightspot Mini LED 135

11 Nightspot Mini LED with wall arm Nightspot Mini LED with wall arm Variable light distribution using an additional optical lense. Equipped with 3 x 3 W high performance LEDs, thermal monitoring device, protection class I, IP65, IK08 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure by 4 stainless steel screws, base can be rotated 3, 1 drilled hole Ø 6.m, knuckle joint with 110 tilt range, with 0.8 M cable H05RN-F3G1, integral transformer and on-board driver 6,5 Nightspot Mini LED with wall arm, narrow beam Part number* Colour Lamp Weight Beam angle γ black 3 x LED 3 W warm white 1.5 kg white silver grey 0, 1,0 m 4,0 4, , 4, lm LED 1 m Nightspot Mini LED with wall arm, linear beam spread Part number* Colour Lamp Weight Beam angle γ C C black 3 x LED 3 W warm white 1.5 kg white silver grey 0, 1,0 m 4,0 1, 4,0 4, lm LEDs 1 m Nightspot Mini LED with wall arm, wide beam Part number* Colour Lamp Weight Beam angle γ black 3 x LED 3 W warm white 1.5 kg white silver grey 0, 1,0 m 4,0 4,0 1, 4, S 340 lm LEDs 1 m *These luminaires are also available with neutral white or monochrome coloured LEDs (amber, blue, red, green) upon request. 136 Nightspot Mini LED with wall arm Light source LED, replacement modules available

12 Accessories for Nightspot Mini black Cowl, stainless steel, to avoid lateral glare white silver grey Accessories for Nightspot Mini 20/35 W Part number Description Carrier ring, for internally fitted colour filters, prismatic glass or ribbed glass spreader lense Part number Description Prismatic glass, to widen the beam angle 4 Accessories for Nightspot Mini yellow Dichroic glass colour filter, internally fitted red blue green Part number Description Ribbed glass spreader lense, internally fitted, for linear beam distribution, continuously adjustable through 3 62 Part number Description Radial louvre, to reduce lateral glare Part number Description Glare shield, internally fitted, to reduce light overspill 81 Nightspot Mini 137

13 Nightspot 35/70/100 W Nightspot 35/70/100 W with mounting bracket For metal halide lamps (HIT) and ceramic metal halide lamps (HIT-CE) protection class I, IP65, IK08 windage area AW cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, mounting bracket powder coated aluminium with tilt scale: 2 drilled holes Ø 9 mm, spacing 70 mm, 1 centre hole Ø 2m, tilt range 135, M20 cable gland, integral LPF ballast and ignitor, HPF available (see page 240), supplied without lamp Nightspot 35 W with mounting bracket, narrow beam black HIT-CE 35 W G kg white silver grey HIT-CE 35 W 30 lm Ø 0,61 m Ø 0,9 Ø 1,2 Ø 1,5 Ø 1,8 1867lx 8lx 467lx 299lx 207lx , 12, 1 Nightspot 70 W with mounting bracket, narrow beam black HIT 70 W G kg white silver grey 60 lm Ø 1, Ø 2, Ø 3,7 m 933 lx 233 lx 104 lx Ø 4,9 m 58 lx Ø 6,1 m 37 lx m Nightspot 100 W with mounting bracket, narrow beam black HIT-CE 100 W G kg white silver grey HIT-CE 100 W 90 lm Ø 1,2 Ø 2,4 Ø 3,67 m 1315lx 9lx 146lx Ø 4,89 m 82lx Ø 6,1 53lx m Accessories for Nightspot 35/70/100 W, narrow beam Part number Description Beam angle γ Ribbed glass spreader lense, internally fitted, for linear C C 270 beam distribution, continuously adjustable through lm , 461lx 0,9 m 5,0 m 1,7 m 115lx 15,0 m 12, 10,0 m 7, 2, 51lx 3, 29lx 4, 18lx 5, 13lx m Nightspot 35 W with mounting bracket, medium wide beam black HIT-CE 35 W G kg white silver grey HIT-CE 35 W 30 lm Ø 1,0 Ø 2, 738lx 184lx Ø 3,1 82lx Ø 4, 46lx Ø 5,2 lx 0 0 Nightspot 70 W with mounting bracket, medium wide beam black HIT 70 W G kg white silver grey 60 lm Ø 1, Ø 3,1 m 656 lx 4 lx Ø 4,7 m 73 lx Ø 6, 41 lx Ø 7,9 m 26 lx 9 m 1 1 Nightspot 70 W with mounting bracket, wide beam black HIT 70 W G kg white silver grey 60 lm Ø 4,5 207lx Ø 6,87 m 92lx Ø 9, m 52lx Ø 11,4 33lx Ø 13,7 23lx Nightspot 35/70/100 W HIT HIT-CE

14 Nightspot 35/70/100 W with mounting base For metal halide lamps (HIT) and ceramic metal halide lamps (HIT-CE) protection class I, IP65, IK08 windage area AW cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, powder coated aluminium mounting base adjustable: 2 drilled holes Ø 9 mm, spacing 10m, 1 centre hole Ø 2m, tilt range 125, swivel range 3, M20 cable gland, integral LPF ballast and ignitor, HPF available (see page 240), supplied without lamp Nightspot 35/70/100 W HIT-CE 35 W 30 lm Ø 1, Ø 2, 467 lx 117 lx Ø 3,7 m 52 lx Ø 4,9 m 29 lx Ø 6,1 m 19 lx Nightspot 35 W with mounting base, narrow beam black HIT-CE 35 W G kg white silver grey m 60 lm Ø 1, Ø 2, Ø 3,7 m 933 lx 233 lx 104 lx Ø 4,9 m 58 lx Ø 6,1 m 37 lx Nightspot 70 W with mounting base, narrow beam black HIT 70 W G kg white silver grey m HIT-CE 100 W 90 lm Ø 1,2 Ø 2,4 Ø 3,67 m 1315lx 9lx 146lx Ø 4,89 m 82lx Ø 6,1 53lx Nightspot 100 W with mounting base, narrow beam black HIT-CE 100 W G kg white silver grey m lm , 461lx 0,9 m 5,0 m 1,7 m 115lx 15,0 m 12, 10,0 m 7, 2, 51lx 3, 29lx 4, 18lx 5, 13lx Accessories for Nightspot 35/70/100 W, narrow beam Part number Description Beam angle γ Ribbed glass spreader lense, internally fitted, for C C 270 linear beam distribution, continuously adjustable through m 0 0 HIT-CE 35 W 30 lm Ø 1,0 Ø 2, 738lx 184lx Ø 3,1 82lx Ø 4, 46lx Ø 5,2 lx Nightspot 35 W with mounting base, medium wide beam black HIT-CE 35 W G kg white silver grey 60 lm Ø 1, Ø 3,1 m 656 lx 4 lx Ø 4,7 m 73 lx Ø 6, 41 lx Ø 7,9 m 26 lx Nightspot 70 W with mounting base, medium wide beam black HIT 70 W G kg white silver grey 9 m lm Ø 4,5 207lx Ø 6,87 m 92lx Ø 9, m 52lx Ø 11,4 33lx Ø 13,7 23lx Nightspot 70 W with mounting base, wide beam black HIT 70 W G kg white silver grey 1 HIT HIT-CE Nightspot 35/70/100 W 139

15 Nightspot Gobo Projector Nightspot Gobo Projector For ceramic metal halide lamps (HIT-CE) protection class I, IP65, IK08 windage area AW 0.11 m 2 cast aluminium housing and aluminium profile, polyester powder coated, rotationally symmetrical aluminium reflector, projection lens for focusing, holders for gobos (size B, Ø 8m) and for colour filters, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, powder coated aluminium mounting bracket with tilt scale: 2 drilled holes Ø 9 mm, spacing 70 mm, 1 centre hole Ø 22mm tilt range 105, M20 cable gland, integral LPF ballast and ignitor, HPF available (see page 240), supplied without lamp Nightspot Gobo Projector 70 W, 1 mm focal length* Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey * not suitable for characters Nightspot Gobo Projector, 70 W, mm focal length Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey 60 lm lm Ø 1,7 Ø 0,8 Ø 3,5 584lx 146lx Ø 1,69 m Ø 5,3 65lx 9 m Ø 2,5 1221lx 5lx 136lx 9 m Ø 7,11 m 37lx 1 Ø 3,37 m 76lx 1 Ø 8,89 m 1 Ø 4,2 1 23lx 49lx Nightspot Gobo Projector 70 W, with zoom lense 70 1m focal length Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey 60 lm Ø 5, Ø 3,00 m lx 12 lx Nightspot Gobo Projector 100 W, with zoom lense 70 1m focal length Part number Colour Lamp Lampholder Weight Beam angle black HIT-CE 100 W G kg white silver grey HIT-CE 100 W 90 lm Ø 5, Ø 3,00 m 42 lx 17 lx Nightspot Gobo Projector 150 W, 1 mm focal length *(separate control gear unit required) Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey * not suitable for characters Nightspot Gobo Projector 150 W mm focal length (separate control gear unit required) Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey 10 lm lm Ø 1,7 Ø 0,8 Ø 3,5 Ø 1,69 m Ø 5,3 1239lx 310lx 138lx 9 m Ø 2,5 9 m Ø 7,11 m 77lx 1 Ø 3,37 m 1 Ø 8,89 m 1 Ø 4,2 25lx 8lx 288lx 2lx 104lx 1 50lx Nightspot Gobo Projector 150 W with zoom lense, 70-1m focal length (separate control gear unit required) Part number Colour Lamp Lampholder Weight Beam angle black G kg white silver grey 140 Gobo Projector 10 lm HIT-CE Ø 5, Ø 3,00 m 63 lx 25 lx

16 Accessories for Nightspot Gobo Projectors 70/100/150 W, 1/ mm focal length and zoom lense with focal length 70 1m yellow Dichroic colour filter red blue green Part number Description Framer for sharp edges on 3 or 4-sided images Nightspot Gobo Projector Accessories for Nightspot Gobo Projectors, 1/ mm focal length Part number example Description waves Standard gobos stars Ø 8m (size B) hatch Custom made gobos can be produced from Image data in one of the following file formats: EPS (min. 0 dpi), TIF (min. 0 dpi), JPG (in low compression). Max. image size D on gobo: For focal length f = 1 mm and f = mm: D = 70 mm For zoom lense: D = 4m Accessories for Nightspot Gobo Projectors 150 W Part number Colour Power factor Description black LPF Control gear unit white LPF for, IP silver grey LPF black HPF white HPF silver grey HPF Max. diameter of image, focal length f = 1 mm and f = mm, gobo aperture 70 mm 10 9 Diameter of image in m f=1mm f=mm Distance in m Max. diameter of image, zoom lense focal length f = 70-1m, gobo aperture 4m 6 5 f=70mm 4 3 f=120mm Diameter of image in m Distance in m Nightspot 141

17 Nightspot 150/250 W Nightspot 150/250 W with mounting bracket For metal halide lamps (HIT) and ceramic metal halide lamps (HIT-CE) protection class I, IP65, IK08 windage area AW 0.0 2, cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, powder coated aluminium mounting bracket with tilt scale: 2 drilled holes Ø 9 mm, spacing 70 mm, 1 centre hole Ø 2m, tilt range 135, M20 cable gland, integral LPF ballast and ignitor, 250 W: integral ignitor, separate ballast required, HPF available on request (see page 240), supplied without lamp Nightspot 150 W with mounting bracket, narrow beam black HIT 150 W G kg white silver grey 10 lm Ø 1,1 Ø 1,7 22lx 1156lx Ø 2,31 m Ø 2,8 Ø 3,4 650lx 4lx 289lx m Nightspot 250 W with mounting bracket, narrow beam, separate ballast required black Osram HCI-TM G kg white 250 W silver grey HIT-CE 250 W lm Ø 4, 2 lx Ø 8, 65 lx Ø 13, 29 lx Ø 17,7 m lx Ø 22,1 m 10 lx m 80 m 100 m Accessories for Nightspot 150 W, narrow beam Part number Description Beam angle γ Ribbed glass, internally fitted, for linear beam distribution, C C 270 continuously adjustable through lm ,0 m 8lx 29,9 m 24,9 m 19,9 m 15,0 m 10,0 m 1, 2, 77lx 4, 34lx 5, 19lx 7,0 m 12lx 8, 9lx m m Accessories for Nightspot 250 W, narrow beam Part number Description Beam angle γ Ribbed glass, internally fitted, for linear beam distribution, C C 270 continuously adjustable through HIT-CE 250 W lm , 253lx 37,1 m 31,0 m 24, 18, 12, 3, 7, 63lx 10,9 m 28lx 14, lx 18, 10lx 21, 7lx m m Nightspot 150 W with mounting bracket, medium wide beam black HIT 150 W G kg white silver grey 10 lm Ø 2, Ø 5, 501 lx 125 lx Ø 7,9 m 56 lx Ø 10, 31 lx Ø 13,1 m 20 lx Nightspot 250 W with mounting bracket, medium wide beam, separate ballast required black Osram HCI-TM G kg white 250 W silver grey HIT-CE 250 W lm Ø 5,9 m 227 lx Ø 11, 57 lx Ø 17, 25 lx Ø 23,7 m 14 lx Ø 29, 9 lx m Nightspot 150 W with mounting bracket, wide beam black HIT 150 W G kg white silver grey lm Ø 4,6 Ø 6,9 Ø 9,2 509lx 226lx 127lx Ø 11,5 81lx Ø 13,8 57lx Nightspot 150/250 W HIT HIT-CE Osram HCI-TM 250 W

18 Nightspot 150/250 W with mounting base For metal halide lamps (HIT) and ceramic metal halide lamps (HIT-CE) protection class I, IP65, IK08 windage area AW cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, powder coated adjustable aluminium mounting base: 2 drilled holes Ø 9 mm, spacing 10m, 1 centre hole Ø 2m, tilt range 115, swivel range 3, M20 cable gland, 150 W: integral LPF ballast and ignitor, 250 W: integral ignitor, separate ballast required, HPF available on request (see page 240), supplied without lamp Nightspot 150/250 W lm Ø 1,1 Ø 1,7 22lx 1156lx Ø 2,31 m Ø 2,8 Ø 3,4 650lx 4lx 289lx Nightspot 150 W with mounting base, narrow beam black HIT 150 W G kg white silver grey 1 2 m HIT-CE 250 W lm Ø 4, 2 lx Ø 8, 65 lx Ø 13, 29 lx Ø 17,7 m lx Ø 22,1 m 10 lx Nightspot 250 W with mounting base, narrow beam, separate ballast required black Osram HCI-TM G kg white 250 W silver grey m 80 m 100 m lm ,0 m 8lx 29,9 m 24,9 m 19,9 m 15,0 m 10,0 m 1, 2, 77lx 4, 34lx 5, 19lx 7,0 m 12lx 8, 9lx Accessories for Nightspot 150 W, narrow beam Part number Description Beam angle γ Ribbed glass, internally fitted, for linear beam distribution, C C 270 continuously adjustable through 3 8 m m HIT-CE 250 W lm , 253lx 37,1 m 31,0 m 24, 18, 12, 3, 7, 63lx 10,9 m 28lx 14, lx 18, 10lx 21, 7lx Accessories for Nightspot 250 W, narrow beam Part number Description Beam angle γ Ribbed glass, internally fitted, for linear beam distribution, C C 270 continuously adjustable through m m lm Ø 2, Ø 5, 501 lx 125 lx Ø 7,9 m 56 lx Ø 10, 31 lx Ø 13,1 m 20 lx Nightspot 150 W with mounting base, medium wide beam black HIT 150 W G kg white silver grey HIT-CE 250 W lm Ø 5,9 m 227 lx Ø 11, 57 lx Ø 17, 25 lx Ø 23,7 m 14 lx Ø 29, 9 lx Nightspot 250 W with mounting base, medium wide beam, separate ballast required black Osram HCI-TM G kg white 250 W silver grey m lm Ø 4,6 Ø 6,9 Ø 9,2 509lx 226lx 127lx Ø 11,5 81lx Ø 13,8 57lx Nightspot 150 W with mounting base, wide beam black HIT 150 W G kg white silver grey 1 HIT HIT-CE Osram HCI-TM 250 W Nightspot 150/250 W 143

19 Accessories for Nightspot Accessories for Nightspot 35/70 W 35/70 W black Cowl, stainless steel, to avoid lateral glare white silver grey Accessories for Nightspot 150/250 W 150/250 W black Cowl, stainless steel, to avoid lateral glare white silver grey /70 W 150/250 W Beam angle γ Part number Part number Description narrow beam medium wide beam Prismatic glass, internally fitted, for diffused light 8 distribution 35/70 W 150/250 W Beam angle γ Part number Part number Description narrow beam medium wide beam Ribbed glass, internally fitted, for linear beam control, continuously adjustable black Stainless steel earth spike, white for use in landscape lighting silver grey M black Pole Top Fitter, aluminium, white for 76mm pole top, with M20 x 1.5 connection thread, silver grey for installation of one luminaire 1 M Accessories for Nightspot 35/70/150 W 35/70 W 150 W Part number Part number Description Rotational louvre, internally fitted, to reduce lateral glare, for mounting on front of floodlight 35/70 W 150 W Part number Part number Description Glare shield, internally fitted, to reduce light overspill 35/70 W 150 W Part number yellow Colour filter, red internally fitted blue green Accessories Nightscape 250 W Part number Colour Power factor Description black LPF Remote ballast unit for white LPF with ballast silver grey LPF HIT-CE 250 W, black HPF IP white HPF silver grey HPF 144 Nightspot

20 Accessories for Nightspot 35/70/150/250 W and Gobo Projector black Single pole mount adapter, white aluminium, silver grey for poles Ø mm black Double pole mount adapter, white aluminium, silver grey for poles Ø mm Accessories for Nightspot black Single pole mount arm, white silver grey aluminium, for poles Ø mm black Double pole mount arm, white silver grey aluminium, for poles Ø mm Accessories for Nightspot 35/70/150/250 W, with mounting base black Pole adapter for one luminaire, for pole diameter 80-1m white silver grey Nightspot 145