OVVIO LED SUSPENDED CEILING. PG-DR versions

Transcription

1 SUSPEDED CEIIG ED PG-DR versions is the perfect fusion of performance, versatility and clean minimal design, all from a single product. Produced form powder coated extruded aluminium with die-cast end caps, the product features a high performance anodised reflector and a satin finished PMMA PG diffuser for soft, uniform light diffusion. The product uses state-of-the-art ED technology for optimum performance, longevity and low energy demand. All versions are supplied with advanced dimmable drivers, which can be set for DAI, DSI, SwitchDIM or Ambient function. can be installed individually, or in long continuous lines when used with accessories. Matching products can be specified for surface and recessed mounting, as well as a completely trimless version for both ceiling and wall applications. Design Esse-Ci. > 90 lm/w from 48W to 72W 256 > 80 < from 1085 to H

2 SUSPEDED CEIIG 26 27

3 RECESSED ED PG-DR versions is the perfect fusion of performance, versatility and clean minimal design, all from a single product. Produced form powder coated extruded aluminium with die-cast end caps, the product features a high performance anodised reflector and a satin finished PMMA PG diffuser for soft, uniform light diffusion. The product uses state-of-the-art ED technology for optimum performance, longevity and low energy demand. All versions are supplied with advanced dimmable drivers, which can be set for DAI, DSI, SwitchDIM or Ambient function. can be installed individually, or in long continuous lines when used with accessories. Matching products can be specified for surface, wall and suspended mounting, as well as a completely trimless recessed version for both ceiling and wall applications when installing into a 12mm thick plasterboard. Design Esse-Ci. 256 > 90 lm/w > 80 < from 48W to 72W from 1085 to H

4 RECESSED 70 71

5 WA FOOR ED PG-DR versions is the perfect fusion of performance, versatility and clean minimal design, all from a single product. Produced from powder coated extruded aluminium with die-cast end caps, the product features a high performance anodised reflector and a satin finished PMMA PG diffuser for soft, uniform light diffusion. uses state-of-the-art ED technology for optimum performance, longevity and low energy demand. All versions are supplied with advanced dimmable drivers, which can be set for DAI, DSI, SwitchDIM or Ambient function. Matching products can be specified for surface and suspended mounting, as well as a completely trimless recessed version for both ceiling and wall applications when installing into a 12mm thick plasterboard. Design Esse-Ci. > 90 lm/w from 48W to 72W 256 > 80 < from 1085 to H

6 SUSPEDED CEIIG 24 RECESSED 68 WA FOOR 86 DESCRIPTIO is the perfect fusion of performance, versatility and clean minimal design, all in a single product. State-of-the-art ED technology ensures optimum performance, longevity and low energy demand. All versions are supplied with advanced dimmable drivers, which can be set for DAI, DSI, SwitchDIM or Ambient function (see the ight Management section at page 322). The product can be installed individually, or in long continuous lines. When used with accessories Ovvio can be installed as a pendant fixture, or directly to the surface of a wall or ceiling, and as recessed mounted using the first-fix frames. Pendant versions can be height adjusted using the clutch operated wire suspensions and all products come through wired as standard. SPECIFICATIOS Dimmable standard 350mA Colour temperature: 3000K/4000K uminous efficency > 90 lm/w CRI > 80; McAdams 3 ife Time: h Eye safety: risk-free (risk group 0) in accordance with E62471:2008 FUX MAITEACE CURRET 90/B10 90/B50 80/B10 80/B50 70/B10 70/B50* 350mA h h h h h > h * E.g. 70 guaranteed luminous flux of the entire luminaire 70% B50 50% of the diodes may have a flux reduction below 70% OPTICS PMMA diffuser for a soft emission with no shadow evident. BODY Body in extruded aluminium with epoxy powder coating. EGA REFERECES The appliances are conform to safety standards E , IEC E and lighting for working places UI E CERTIFICATIOS IP 40 ErP class: COOURS White RA Code: B Aluminium grey - Code: C6 O REQUEST Wiring with emergency kit - Code: EM for 1 hour / EM3H for 3 hour (verify the version available)

7 PG-DR ACCESSORIES OPTIC PMMA diffuser for a soft emission with no shadow evident / 1355 / 1625 IP 40 71AA mm single suspension kit with millimetric adjustment. 71AA mm single suspension kit with millimetric adjustment. 71AA165P 5 pole-powered supply box - cable length 2000 mm COD lm mm 71ED484RDD 48W 350mA 4000K x ED604RDD 60W 350mA 4000K x ED724RDD 72W 350mA 4000K x 1625 COD lm mm 71ED483RDD 48W 350mA 3000K x ED603RDD 60W 350mA 3000K x AA11 ED inear joint. 71AA09 ED Single closing head. 71AA15 ED Kit for wall mounting. 71ED723RDD 72W 350mA 3000K x 1625 TECHICA OTE COECTIO DIAGRAM COECTIO SWITCHDIM The lighting fixtures can be switched on and off by briefly pressing the /A button; a longer pressure allows for the lighting fixture adjustment. Several buttons can be connected to each other in parallel. A maximum of 25 lighting fixtures can be connected to the same button AAPI End aluminium profile for recessed installation in continuous line / 1355 / 1625 Side aluminium profiles for recessed installation in continuous line/ Each item code consists of no. 2 aluminium profiles, connection plates and spacers. 71P48: For 48W lighting fixture. 71P60: For 60W lighting fixture. 71P72: For 72W lighting fixture. COECTIO WITH BUS DAI OR DSI SEGAE DAI/DSI COECTIO FOR AMBIET FUCTIO MODE D1 D2 D1 D2 The Ambientfunction mode is automatically activated (after 5 ) by connecting the lighting fixtures to a motion detector. The motion detector will be associated by default with a dimming level equal to 100%. If no motion is detected, the dimming level turns to 10% within 30. The default profile is set on the always switched on mode. Other configurations can be set upon request