GENERAL CATALOGUE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE

Size: px
Start display at page:

Download "GENERAL CATALOGUE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE"

Transcription

1 GENERAL CATALOGUE ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE

2 ANY SHAPE YOU DESIRE WITH THE BEST STEEL WIRE GENERAL CATALOGUE EDITION 7.0 February 2013 UNI EN ISO 9001:2008 Reg. No: 280-A

3 INDEX COMPANY TECHNOLOGY PRODUCTS PARTNERS SECTORS 4 6 GENERAL FEATURES OF THE ARTICLES ARTICLES ON DRAWING SHAPED ARTICLES PROMPT DELIVERY ARTICLES CERTIFICATION INDEX

4 4 THE COMPANY ZARRI S.r.l. is located 20 km north of Bologna (Italy). Founded in 1973 by Angelo and Franca Zarri, it specializes in the MANUFACTURING of articles obtained from metallic wire in diameters that range from 3 to 28 mm, in any quality of steel, for machinery and plant manufacturers. ZARRI employs 40 people on an area of 15,000 m², of which 3,500 covered. It supplies more than 800 customers (of which 25% from outside Italy). COMPANY - TECHNOLOGY - PRODUCTS TECHNOLOGY Every year ZARRI processes 1,300 tons of steel, 750 of which from coil (ø3 12 mm) and 550 from bars (ø10 28 mm), through cold forming technology and using different production lines, which allows it to quickly meet orders for small, medium and large quantities. The main in-house processes are threading by rolling and bending, along with cutting, extrusion, coining, stamping, pressing, welding and boring. By contracting out part of the processes to third-party qualified companies, ZARRI is able to provide several heat treatments (stress relieving, hardening and induction tempering ) and anti-corrosion coatings (electrolytic zincplating, hot-dip galvanizing, zinc/aluminium, Geomet, chrome-plating, burnishing, cataphoresis, painting, phosphate coating ). PRODUCTS Zarri s main products, both bent and threaded, are: U-bolts, studs, tie-rods, hooks, eye-bolts, pins and several special bent articles. 80% of ZARRI s production is accounted for by ON DRAWING ARTICLES made to the customer s specifications and drawings. These are components for machines and plants, supplied following single or programmed orders. The remaining 20% is composed of ON STOCK ARTICLES included in our catalogue, namely coupling and clamping components such as round and square U-bolts, band clamps and clamps, for which we ensure prompt delivery, distributed to the market both directly and through a wide network of dealers (nuts and bolts shops and components wholesalers). Automated warehouse ZARRI is equipped with a modern automated warehouse, with a storage capacity of 700 pallets, which ensures a justin-time service to its customers. quality Since 1997 ZARRI has operated with a Certified Quality Management System. In 2009 Zarri obtained the ISO 9001:2008 certification from the Cermet Institute of Bologna. 5

5 PARTNERS - SECTORS PARTNERS Thanks to its level of specialization and expertise, ZARRI is top-of-the-range in its market. Besides, ZARRI also provides its customers with a consultancy service and its know-how so as to improve product design and optimize the production process, offering competitiveness and the highest quality throughout a wide range of items, especially those made from metallic wire. THE SECTORS at which Zarri s products are directed are many and vary from tractors and farm machinery, motorcycles and motors, electrical, petrochemical, thermal hydraulic plants and steelworks, to cranes, the construction industry, greenhouses, vineyards, eaves, toys, boats, compressors, pumps, furniture, heaters, etc. AGRICOLTURE AUTOMOTIVE RENEWABLE ENERGIES 6 STREET FURNITURE AND GAMES FURNISHINGS COSTRUCTION INDUSTRY NAUTICAL EQUIPMENT 7

6 8 GENERAL FEATURES OF THE ARTICLES 9 COLD WORKING TECHNOLOGY THE BEST MATERIALS MAIN FEATURES WIRE DIAMETER THREADS REDUCED SHANK AND NOMINAL DIAMETER CHAMFERING COLD WORKING TECHNOLOGY With the term cold forming we refer to a type of processing performed at room temperature which exploits a property of steel called plasticity, namely the property of undergoing permanent deformation without breaking. By exerting a force high enough on steel, it is possible to obtain a permanent deformation: the technology of cold working exploits precisely this principle. Generally opposed to hot forming, in which steel is initially heated up to very high temperatures, cold forming s distinctive feature is that it makes production simpler and cheaper. WIRE DIAMETER We process from very thin diameters (Ø3) to thicker ones (Ø28), to obtain threads that range from M4 to M30. The material is processed from coils (from Ø3 to Ø12) and bars (from Ø10 to Ø28). THREADS Our production technology allows us to obtain any kind of thread according to your needs, in particular: ISO metric thread (thick or thin pitch); ISO trapezium metric thread; UTS (American Standard) thread in inches; Whitworth thread. Threads are always obtained through rolling, a process that enables to obtain the thread by means of plastic deformation. This type of processing has numerous advantages compared to threads obtained by material removal, in particular: the fibers of the material are not cut, but only deformed, thus improving its mechanical strength; the strong surface hardening due to deformation makes the crests of the threads harder and more wear resistant; rolling is a much faster and cheaper process.

7 GENERAL FEATURES OF THE ARTICLES NOMINAL DIAMETER REDUCED SHANK 10 Our threaded articles can be manufactured in two main versions, which are described below. 1. Threaded articles with thread performed on starting REDUCED SHANK The thread is obtained by rolling on a starting thinner wire. The thread thus obtained is of the desired size, while the smooth part adjacent to it is of a slightly smaller diameter, although not reducing the overall resistance of the workpiece. 2. Threaded articles with thread performed on overall NOMINAL DIAMETER Threading is performed by rolling after reducing the diameter of the workpiece from the initial diameter. In this case, the diameter of the adjacent smooth part is equal (or, if wanted, greater than) to the size of the thread. CHAMFERING The hallmark of all our articles is the great attention we pay to all details, which ensures easy and fast application and use. Chamfering is a peculiarity of all our products from medium to big diameters. Our technology allows us to complete all threaded items with a chamfer to facilitate the introduction. Preferably, threading includes the chamfer for diameters from M10 to M30. However, we guarantee easy screwing also for smaller diameters. MAIN MANUFACTURING Our main manufacturing processes are: BENDING, THREADING BY ROLLING, CUTTING and CHAMFERING. Additional processes are: WELDING, HOLE-MAKING, MILLING, EXTRUSION, COINING, STAMPING, PRESSING, BORING. PROCESSES MATERIALS Here are the main materials we use: Please feel free to enquire about those which are not listed here, our technical staff is glad to be always at your disposal! Non-alloy structural steel for general purposes Tempered and high-strength steel Free-cutting steels Stainless steels Grade designation by number EN *) Values are given purely as an indication. Grade designation by symbol AISI/SAE S235JRC (Fe 360) AISI S275JRC (Fe 430) AISI S355J2G3C (Fe 510) SAE B C45E AISI CrMoS4 SAE Corresponding resistance grade * ISO ISO SMn37 (AVZ) AISI SMnPb37 (AVP) AISI 12L X2CrNi19-11 AISI 304L A2-70 (A2-80) X2CrNiMo AISI 316L A2-70 (A2-80) X6Cr17 AISI 430 F

8 GENERAL FEATURES OF THE ARTICLES 12 Protective coating Fe/Zn8/A WHITE ZINC-PLATING CrIII Zinc coating with clear brilliant passivation. RoHScompliant- It does not contain Chromium VI. Fe/Zn8/B YELLOW ZINC-PLATING CrIII Zinc coating with pale yellow passivation. RoHScompliant- It does not contain Chromium VI. Fe/Zn8/C IRIDESCENT ZINC-PLAT- ING CrIII Zinc coating with iridescent yellow passivation. RoHScompliant- It does not contain Chromium VI. Fe/Zn8/F BLACK ZINC-PLATING CrIII Coating with black passivation. RoHScompliant- It does not contain Chromium VI. FINISHINGS Coating thickness [µm] Approximate minimum corrosion resistance (salt spray test) [hours] Fe/Zn C HOT ZINC-PLATING Zinc-coating from hot-dipping and centrifuging years RoHScompliant- It does not contain Chromium VI. GEOMET A Metallic non-electrolytic coating. Color: aluminium-gray. GEOMET 321: protective. GEOMET 500: protective and lubricating RoHScompliant- It does not contain Chromium VI. GEOMET B Metallic non-electrolytic coating. Color: aluminium-gray. GEOMET 321: protective. GEOMET 500: protective and lubricating RoHScompliant- It does not contain Chromium VI. DACROMET A Metallic non-electrolytic coating. Color: aluminium-gray. GEOMET 320: protective GEOMET 500: protective and lubricating. DACROMET B Metallic non-electrolytic coating. Color: aluminium-gray. GEOMET 320: protective GEOMET 500: protective and lubricating. CHROME-PLATING Chromium coating which gives the surface a matte clear or shiny gloss appearance and protection against corrosion. Typically, a Chromium coating (0,25-0,40 micron) is placed over an electrolytic nickel-plating coating. CATAPHORESIS Electrodeposition paint (usually black) which ensures homogeneous thickness. PHOSPHATE COATING Temporary protective treatment. 7 - PAINTING Powder coating o sup. Surface treatment POLISHING BURNISHING TUMBLING WASHING SHOT PEENING SANDBLASTING Description Degreasing galvanic wash, which gives the workpiece a clean and shiny appearance. Preferably used in stainless steel articles. Steel Colouring (black) through the immersion of details that need to be treated in special chemical solutions. Treatment for burr removal (vibratory finishing). Degreasing wash (only suitable for stainless steel). Propelling small hard spheres on the workpiece surface. The treatment removes surface impurities and burrs and slightly hardens the workpiece surface. Blowing sand through a spray gun on the workpiece surface. The treatment removes surface impurities or coatings. ACCESSORIES We are able to provide all our articles supplied with standard or special bolts, untreated or treated with electrolytic zincplating, hot-dip galvanized or in stainless steel. U-bolts for prompt delivery are supplied with nuts UNI 5587, UNI 5588 (DIN 934), and UNI 5589 (DIN 936), and washers UNI 6592 (DIN 125) and It is also possible, and often advisable, to combine our products with special nuts such as flange nuts (in place of nut + washer, for faster application), and self-locking nuts. Together with our products, we are also able to provide plates (see type 701 and 713, page 26-28) and other items in various materials, such as Teflon plates, heat-shrink tubings, nylon nets for thread protection 13

9 14 ARTICLES ON DRAWING - TYPE U-bolt for pipe clamping type 101 Special U-shaped threaded screw. Suitable for clamping circular section elements of various sizes, from small diameter tubes to big pipes. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment). FOR PROMPT DELIVERY SIZES see page 64

10 16 ARTICLES ON DRAWING - TYPE U-bolt for square pipe clamping type 102 Special U-shaped threaded screw. Suitable for clamping square or rectangular section elements, pipes and C-rails. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment). FOR PROMPT DELIVERY SIZES see page 70

11 18 ARTICLES ON DRAWING - TYPE U-bolt for square pipe clamping with bent leg type 142 Special U-shaped threaded hook, with bent leg. Chiefly used for clamping springs and cogs on square section pipes, especially in farm machinery like graders and haymaking machines. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

12 20 ARTICLES ON DRAWING - TYPE U-bolt for pipe clamping with bent leg type 141 Special U-shaped threaded hook, with bent leg. Used for fast clamping of pipes and other circular section elements. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

13 22 ARTICLES ON DRAWING - TYPE U-bolt for square pipe clamping type 103 Special triangular seat threaded screw. Suitable for clamping square section elements, square or rectangular pipes and C-rails. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

14 24 ARTICLES ON DRAWING - TYPE Arc seat U-bolt type 107 Special U-shaped threaded screw, with arc seat. Used for clamping mounts for leaf springs, rails on railroad ties and whenever a high level of resistance is required. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

15 26 ARTICLES ON DRAWING - TYPE STRAIGHT PLATE type 701 Straight stamped plate. Holes or slots can be made to fit various clamping items. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

16 28 ARTICLES ON DRAWING - TYPE BENT PLATE type 713 Bent stamped plate. Holes or slots can be made to fit various clamping items. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

17 30 ARTICLES ON DRAWING - TYPE BAND CLAMPS FOR PIPE CLAMPING TUBEFIX type 711 Pair of band clamps for pipe clamping on C-rails. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment). FOR PROMPT DELIVERY SIZES see page 72

18 32 ARTICLES ON DRAWING - TYPE Stud threaded on both ends type 112 Stud threaded on both ends, mainly used as an alternative to ordinary screws for connecting parts (when making a through hole in one of the parts to be connected is not possible or not convenient). This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

19 34 ARTICLES ON DRAWING - TYPE 110, Stud bolt type 110 TYPE 116 Fully threaded tie-rod, generally used for adjustable clamping of couplings and flanges. Type 116 refers to the kind of fully threaded rod supplied with a plastic net to protect the thread. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

20 36 ARTICLES ON DRAWING - TYPE Single end stud Grub screw type 111 Tie-rod threaded only on one end, generally used as a weld screw in woodwork. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

21 38 ARTICLES ON DRAWING - TYPE Support for cardan shaft type 328 Molded out of steel wire, used to support the cardan shaft after the tool is released from the tractor. It is worthwhile matching it with a coupling plate, so that the support can be secured to the machine frame when the shaft is connected to the operating tool. For the complete kit, please refer to Zarri s corresponding standard article. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

22 ARTICLES ON DRAWING - TYPE 122, 125, 132, 151 EYE-BOLTS Tie-rod threaded on one end and eye-bent on the other. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment). type 125 Eye-bent foundation bolt Big-sized threaded tie-rod with one ring-shaped bent end, used in the construction industry as a foundation bolt. The non-threaded end must be immersed in the cement. type 122 Eyelet bolt Threaded tie-rod with a ring-shaped bent end, commonly used for securing cables, ropes or chains. type 132 Triangular eye-bolt Threaded tie-rod with one triangleshaped bent end, commonly used to fasten straps or band clamps. 40 type 151 Drop-shaped eyelet Threaded tie-rod with a ring-shaped bent end, commonly used for securing cables, ropes or chains. 41

23 42 ARTICLES ON DRAWING - TYPE 120, 121, 124, 126, Bent end tie-rod type 124 Hook bolt Threaded tie-rod with one bent end, used to hook other objects. type 120 Bent end tie-rod Threaded tie-rod with one bent end, may be used for motion transmission in jointed parts such as steering wheels and control levers, or (generally in bigger sizes) as foundation bolt. type 126 Hook for square pipes Threaded tie-rod with one squared bent end, commonly used for clamping square or rectangular section pipes. type 121 Bent end tie-rod Threaded tie-rod with one bent end, may be used for motion transmission in jointed parts such as steering wheels and control levers, or (generally in bigger sizes) as foundation bolt. type 135 Bent end tie-rod Threaded tie-rod with one bent end, may be used for motion transmission in jointed parts such as steering wheels and control levers, or (generally in bigger sizes) as foundation bolt.

24 44 ARTICLES ON DRAWING - TYPE Foundation bolt or hook for pipes type 123 Threaded tie-rod with one end bent like an umbrella handle, used in the construction industry as foundation clamp or for supporting pipes. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

25 46 ARTICLES ON DRAWING - TYPE Pressed eye-bolt type 129 Hot-pressed and holed tie-rod with one threaded end. Generally used in articulated joints and mechanical parts. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

26 48 ARTICLES ON DRAWING - TYPE Eye-bolt with pressed and HOLED end type 145 Threaded tie-rod with one flattened and holed end, may be used to obtain jointed couplings when matched with a fork and a pin. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

27 50 ARTICLES ON DRAWING - TYPE 106, Clamp for cross pipes type 106 type 108 *optional Double-threaded clamp for fastening round and/or square cross pipes. This article, like all the others made according to the customer s drawing, can be tailored and totally customized in accordance with your own design, material, sturdiness and corrosion resistance needs (heat and surface treatment).

28 52 ARTICLES ON DRAWING - TYPE 202, Handle with external threads type 202 type 104 U-bolt for octagonal pipe clamping

29 54 ARTICLES ON DRAWING - TYPE 139, Open square U-bolt type 139 type 109 U-bolt for L-shaped elements clamping *optional *optional

30 56 ARTICLES ON DRAWING - TYPE 611, Tie-rod with hexagonal nut welded on top type 611 type 605 Tie-rod with welded plate fork

31 58 ARTICLES ON DRAWING - TYPE 607, standardized fork Tie-rod with welded standardized fork type 607 type 310 *optional Handle or C-shaped wire

32 ARTICLES ON DRAWING - TYPE 609 and much more! SHAPED ARTICLES Tie-rod with welded plain washer type D shaped wire Bent stud with tongues TONGUES type 340 Thanks to our many computer numerical control (CNC) machines, we are well-equipped to produce an endless variety of different shapes made from steel wire, of various sizes and with multiple kinds of bends and threads. These articles are used in many sectors, including interior design (mattress clips, chair and sofa frames), exterior design (outdoor playground equipment, bike racks, benches and other seats), automotive, display stands for trade shows, decorative items and many more fields. Crank tie-rod type 128 Find out what else we think up with steel wire!

33 62 SHAPED ARTICLES 63

34 PROMPT DELIVERY ARTICLES - TYPE U-BOLT FOR PIPE CLAMPING Made out of coated steel and stainless steel. ISO metric thread. Accessories for assembling included. In line with 2002/95/CE (RoHS) regulations. Materials S275JR EN (Fe 430) Low carbon structural steel, drawn, with min. Rm 500 N/mm 2 and min. Rp 0,2 360 N/mm 2. AISI 304L Austenitic stainless steel with good corrosion resistance, min. Rm 700 N/mm 2 and min. Rp 0,2 450 N/mm 2. AISI 316L (MARINE GRADE STAINLESS STEEL) Austenitic stainless steel with excellent corrosion resistance, min. Rm 700 N/ mm 2 and min. Rp 0,2 450 N/mm 2. Finishing Accessories Notes ZINC-PLATING ISO 2081 Fe/Zn8/A (ISO 4042 Fe/Zn 8c1A) Electrolytic zinc coating with minimum thickness 8 micron and Cr VI-free white passivation. CRAPAL Matt grey Zinc/Aluminium coating, self-cicatrizing and with excellent corrosion resistance. WASHING Degreasing washing. Only for stainless steel U-bolts. N 2 hexagonal nuts UNI 5588 grade 8, zinc-plated, A2-70 or A4-70. N 2 flat washers UNI 6592 grade 100HV, zinc-plated, 200HV AISI 304 or 200HV AISI 316. On request, it is possible to change the number of the accessories and the quantity of the pieces included in every package. The Crapal U-bolt range includes only 2 DIN 6923 Dacromet flange nuts. Only available on request. If you don t find your measures, your U-bolt will be made-to-measure! See page 14 type 101 package d 1 a d 3 material and finishing h b e d 2 q.ty kg code S275JR Zinc-plated , , /8 11 M6 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , /4 14 M6 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , /8 18 M6 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , M6 S275JR Crapal , , AISI 304L Washed , , /2 22 S275JR Zinc-plated , , M8 AISI 304L Washed , , AISI 316L Washed , , M10 S275JR Zinc-plated , , S275JR Zinc-plated , , M6 S275JR Crapal , , AISI 304L Washed , , /4 27 S275JR Zinc-plated , , M8 AISI 304L Washed , , AISI 316L Washed , , M10 S275JR Zinc-plated , , S275JR Zinc-plated , , M6 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , M8 AISI 304L Washed , , AISI 316L Washed , , M10 S275JR Zinc-plated , , S275JR Zinc-plated , , M6 S275JR Crapal , , AISI 304L Washed , , ¼ 43 S275JR Zinc-plated , , M8 AISI 304L Washed , , AISI 316L Washed , , M10 S275JR Zinc-plated , , on 65

35 PROMPT DELIVERY ARTICLES - TYPE U-BOLT FOR PIPE CLAMPING d 1 a d 3 material and finishing h b e d 2 package 1 ½ ½ 77 M8 M10 S275JR Zinc-plated , , type 101 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , AISI 304L Washed , , AISI 316L Washed , , M12 S275JR Zinc-plated , , M8 M10 S275JR Zinc-plated , , S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , AISI 304L Washed , , AISI 316L Washed , , M12 S275JR Zinc-plated , , M8 M10 S275JR Zinc-plated , , S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated , , AISI 304L Washed , , AISI 316L Washed , , M12 S275JR Zinc-plated , , If you don t find your measures, your U-bolt will be made-to-measure! See page 14 q.ty kg code package d 1 a d 3 material and finishing h b e d 2 q.ty kg code S275JR Zinc-plated , , M8 S275JR Crapal , , AISI 304L Washed , , S275JR Zinc-plated ,9 50 9, M10 AISI 304L Washed ,9 50 9, AISI 316L Washed ,9 50 9, M12 S275JR Zinc-plated , , S275JR Zinc-plated , , M8 S275JR Crapal , , AISI 304L Washed , , ½ 102 S275JR Zinc-plated , , M12 AISI 304L Washed , , M16 S275JR Zinc-plated , , M8 S275JR Zinc-plated , , AISI 304L Washed , , M10 S275JR Crapal , , S275JR Zinc-plated , , M12 AISI 304L Washed , , M16 S275JR Zinc-plated , , M8 S275JR Zinc-plated , , AISI 304L Washed , , M10 S275JR Crapal , , S275JR Zinc-plated , , M12 AISI 304L Washed , , M16 S275JR Zinc-plated , , S275JR Zinc-plated , , M10 S275JR Crapal , , AISI 304L Washed , , M12 S275JR Zinc-plated , , M16 AISI 304L Washed , , on 67

36 PROMPT DELIVERY ARTICLES - TYPE 101 U-BOLT FOR PIPE CLAMPING type 101 package d 1 a d 3 material and finishing h b e d 2 q.ty kg code M20 S275JR Zinc-plated ,2 5 15, M24 S275JR Zinc-plated ,9 5 22, M20 S275JR Zinc-plated ,2 5 18, M24 S275JR Zinc-plated ,9 5 26, package d 1 a d 3 material and finishing h b e d 2 q.ty kg code S275JR Zinc-plated , , M10 S275JR Crapal , , AISI 304L Washed , , M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated , , S275JR Zinc-plated , , M10 S275JR Crapal , , AISI 304L Washed , , M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated , , M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated ,2 5 10, M24 S275JR Zinc-plated ,9 5 15, M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated ,2 5 11, M24 S275JR Zinc-plated ,9 5 17, M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated ,2 5 13, M24 S275JR Zinc-plated ,9 5 19, M20 S275JR Zinc-plated ,2 5 14, M24 S275JR Zinc-plated ,9 5 20, If you don t find your measures, your U-bolt will be made-to-measure! See page 14 U-BOLT ACCORDING TO DIN 3570 package d 1 a d 3 material and finishing h b e d 2 q.ty kg code 1/2 24 M10 S275JR Zinc-plated , , /4 30 M10 S275JR Zinc-plated , , M10 S275JR Zinc-plated , , ¼ 46 M10 S275JR Zinc-plated , , ½ 52 M10 S275JR Zinc-plated , , M12 S275JR Zinc-plated , , ½ 82 M12 S275JR Zinc-plated , , M12 S275JR Zinc-plated , , M16 S275JR Zinc-plated , , M16 S275JR Zinc-plated , , M16 S275JR Zinc-plated , , M16 S275JR Zinc-plated , , M20 S275JR Zinc-plated , , M20 S275JR Zinc-plated , , M20 S275JR Zinc-plated , , M24 S275JR Zinc-plated ,9 5 18, M24 S275JR Zinc-plated ,9 5 20, M24 S275JR Zinc-plated ,9 5 23, These u-bolts are supplied with 4 zinc-plated nuts UNI 5588 grade 8 and 2 zinc-plated flat washers UNI HV. Measures indicated in the table differ from DIN 3570 in d2 range and the ½ u-bolt for pipe clamping. 69

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Machine devices, jig devices

Machine devices, jig devices Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

These specifications shall apply to all high strength bolts and anchor bolts.

These specifications shall apply to all high strength bolts and anchor bolts. BOLTS (New Section) 972 972.1 REQUIREMENTS These specifications shall apply to all high strength bolts and anchor bolts. 972.2 SPECIFIC REQUIREMENTS A. General: All bolts, nuts, and washers shall have

More information

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend

More information

Dock Hardware & Accessory Products Catalog

Dock Hardware & Accessory Products Catalog Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set

More information

Fasteners and screw threads

Fasteners and screw threads ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

www.steelformcatering.com

www.steelformcatering.com www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in

More information

FUNCTIONAL SPECIFICATION FOR CHAIN PULLEY BLOCK

FUNCTIONAL SPECIFICATION FOR CHAIN PULLEY BLOCK SHEET 1 OF 9 SPECIFICATION FOR SHEET 2 OF 9 1.0 GENERAL 1.1 This specification along with data sheets, other specifications & attachments to inquiry / order describes and constitutes the minimum requirement

More information

INDUCTION WELDED SMALL DIAMETER TUBE PRODUCTION LINE

INDUCTION WELDED SMALL DIAMETER TUBE PRODUCTION LINE INDUCTION WELDED SMALL DIAMETER TUBE PRODUCTION LINE Target Production of welded single - wall tubing manufactured to ASTM A 513, also zinc coated as per UNI 5741-66, suitable for many low pressure and

More information

FASTENERS SELECTION GUIDE

FASTENERS SELECTION GUIDE FASTENERS SELECTION GUIDE Choose from our most popular range of fasteners We have over 9,000 fasteners, fixings, ironmongery and hardware products online June 2016 uk.rs-online.com (UK customers) www.rs-components.com

More information

BS EN 10025: 1-6: 2004 (Current) BS 4360: 1986 (Superseded, Withdrawn) Specification for weldable structural steels

BS EN 10025: 1-6: 2004 (Current) BS 4360: 1986 (Superseded, Withdrawn) Specification for weldable structural steels Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN/other Title

More information

jaks resources berhad ProductCatalogue

jaks resources berhad ProductCatalogue ProductCatalogue Contents 1 ABOUT US 2 QUALITY ASSURANCE & PIPES MANUFACTURING METHOD 3 MAIN PRODUCTS 4 SPECIFICATIONS & APPLICATION 5 WELDED STEEL PIPES - CLASS LIGHT 6 WELDED STEEL PIPES - CLASS MEDIUM

More information

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5 Turtle Island Community Centre Renovation Page 1 of 5 Part 1 General 1.1 SECTION INCLUDES.1 Shop fabricated ferrous metal items..2 Shop fabricated aluminum items..3 Steel pipe handrails balusters, and

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

Introduction to M G Metals

Introduction to M G Metals Introduction to M G Metals M G Metals have over 50 years experience in the metal industry with a dedicated sales team trained in design, production and stockholding. We specialise in sales and customer

More information

INTER PLANT STANDARD - STEEL INDUSTRY

INTER PLANT STANDARD - STEEL INDUSTRY INTER PLANT STANDARD - STEEL INDUSTRY SPECIFICATION FOR PULLING AND LIFTING MACHINES IPSS:1-07-027-14 IPSS Based on IS: 5604-1984 0. FOREWORD 0.1 This Inter Plant standard has been prepared by the Standards

More information

Burbank, CA Headquarters. Casters- Furniture, Institutional, Specialty. Leveling Glides- Light, Heavy Duty. Adjustment Knobs

Burbank, CA Headquarters. Casters- Furniture, Institutional, Specialty. Leveling Glides- Light, Heavy Duty. Adjustment Knobs For over 25 years, MDI has been a leading supplier of quality products to the furniture, healthcare, display, beauty supply & technology industries. Our goal at MDI is to be your "Direct Source" for quality

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

L.L.C (2) (2) P.O.

L.L.C (2) (2) P.O. Technical Metal Industrial Co. L.L.C. Tel: +971 (2) 5502025 Fax: +971 (2) 5502024 P.O. Box: 41558 Abu Dhabi U.A.E. E-mail: tmi@tmico.ae Web: www.tmi-co.com ED 02 - M/Y 09/11 Table of CONTENTS Management

More information

TYRE SERVICE TOOLS CHROME VANADIUM 500mm

TYRE SERVICE TOOLS CHROME VANADIUM 500mm CHROME VANADIUM 500mm TYRE SERVICE TOOLS Sarveshwari Engineers 55 Deepali, Pitampura, Delhi- 11004 Tel.: 011-2702750, 011-27021499, Fax: 011-27021129 Website : / Email : info@sarveshwari.com 1 22007 2

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts: Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen

More information

Special modifications available: - lengths - finish/colors/plating/anodizing

Special modifications available: - lengths - finish/colors/plating/anodizing Search Tube,,, Tubing Tube connection components function like industrial Tinker Toys, and can be combined with round or square tubing to build jigs, fixtures, and operating systems. We offer a vast array

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

SECTION METAL STAIRS, LADDERS, AND WALKWAYS

SECTION METAL STAIRS, LADDERS, AND WALKWAYS SECTION 05510 METAL STAIRS, LADDERS, AND WALKWAYS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Technical requirements for metal stairs, ladder, and walkways. 1.2 REFERENCES A. General: References to

More information

Website: Phone: (847) Fax: (847) PRODUCT CATALOG

Website:    Phone: (847) Fax: (847) PRODUCT CATALOG Website: www.wrdevices.com E-Mail: devices@comcast.net Phone: (847) 625-8500 Fax: (847) 625-8100 PRODUCT CATALOG Cheeper DEFECT CARD HOLDER 22-2716 NOTE: LOCATE HOLES ON CAR BODY ON A HORIZONTAL LINE.

More information

HAWGOOD Swing Door Hinges

HAWGOOD Swing Door Hinges DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),

More information

Machine Screws, Dowel Pins and Hardware

Machine Screws, Dowel Pins and Hardware Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-

More information

HAWGOOD Swing Door Hinges

HAWGOOD Swing Door Hinges DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

INDUSTRIAL FITTINGS - clips, clamps, ferrules MINI CLIP

INDUSTRIAL FITTINGS - clips, clamps, ferrules MINI CLIP Banding strap assembly system band width range [inch] description BG-6035000000 1/4-3/4 Banding strap assembly tool size [inch] width length [m] description BG-6035006000 1/4 6,3 30,5 BG-6035010000 3/8

More information

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement PART 1 GENERAL SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement 1.1 SUMMARY A. Section Includes 1. Supply and install all materials and accoutrements required for the installation

More information

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments:

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments: Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Overall Drawer Size 18" W x 3" H x 12" D Imperial Drawer Assortments: 1. Contain the most popular sizes and styles. 2. Each part

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

YOUR ONE STOP FABRICATION SOURCE

YOUR ONE STOP FABRICATION SOURCE YOUR ONE STOP FABRICATION SOURCE YOUR RELIABLE ONE STOP FABRICATION SOURCE! Our main fabrications facility is a modern full service metal fabrication shop committed to quality and customer service. We

More information

Alternative Steel Materials to BS 5950

Alternative Steel Materials to BS 5950 BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road

More information

Working Drawing and Assemblies. Chapter 10

Working Drawing and Assemblies. Chapter 10 Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

BUMAX. REYHER your partner for the BUMAX range

BUMAX. REYHER your partner for the BUMAX range BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX

More information

Hot Rolled Billets. Production Units: Cerveno (BS), Italy Lesegno (CN), Italy

Hot Rolled Billets. Production Units: Cerveno (BS), Italy Lesegno (CN), Italy Page 1 of 20 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Cerveno (BS), Italy Lesegno (CN), Italy Page 2 of 20 Products

More information

DIMENSIONAL BOLTING CATALOG

DIMENSIONAL BOLTING CATALOG DIMENSIONAL BOLTING CATALOG DIMENSIONAL CATALOG Table of Contents Page Screws Round Head Screws 1-1 Various Head Styles Machine Scerws 1-2 to 1-23 Tapping Screws (Approx. Hole Sizes) 1-24 Thumb and Wing

More information

FASTENERS. Steel Cotter Pins. Spring Roll Pins

FASTENERS. Steel Cotter Pins. Spring Roll Pins Steel Cotter Pins Precision parallel shanks Offset ends for easy locking Finest high strength steel Zinc plated to resist rust and corrosion Size 1/32 3/64 1/16 5/64 3/32 7/64 1/8 1/2 0410201 0410401 0410501

More information

Rolling - Introductory concepts

Rolling - Introductory concepts Rolling - Introductory concepts R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Rolling -

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Pullers. Extra durability. Easy to use. Features of Unior s pullers. Other pullers. Pullers with three adjustable arms

Pullers. Extra durability. Easy to use. Features of Unior s pullers. Other pullers. Pullers with three adjustable arms Pullers Pullers with two adjustable arms Pullers with three adjustable arms Other pullers Extra durability Unior pullers, available with two, three or five adjustable arms, with a sliding hammer or pulling

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

CORROSION PREVENTION On MOTOR and MACHINERY BRAKES Installed On HEAVY MOVABLE STRUCTURES By Lawrence E. Chizmar, Jr., Bubenzer Bremsen America, LLC

CORROSION PREVENTION On MOTOR and MACHINERY BRAKES Installed On HEAVY MOVABLE STRUCTURES By Lawrence E. Chizmar, Jr., Bubenzer Bremsen America, LLC CORROSION PREVENTION On MOTOR and MACHINERY BRAKES Installed On HEAVY MOVABLE STRUCTURES By Lawrence E. Chizmar, Jr., Bubenzer Bremsen America, LLC ABSTRACT Motor and Machinery brakes used on Heavy Movable

More information

producer of zinc, aluminium, magnesium die casting and plastic moulding

producer of zinc, aluminium, magnesium die casting and plastic moulding producer of zinc, aluminium, magnesium die casting and plastic moulding FAM Technika Odlewnicza is a modern producer of zinc, aluminium, magnesium die casting and plastic moulding. The Company is one of

More information

One stop shopping for any metal, cut and ready, fast!

One stop shopping for any metal, cut and ready, fast! ANGLES Data and Specifications 01 Aluminum Angles (Typically Rounded Corners) This is the most versatile of the heat treatable aluminum alloys. This alloy offers a wide range of mechanical properties and

More information

THE SIMBARS BOLLARD COLLECTION

THE SIMBARS BOLLARD COLLECTION THE SIMBARS BOLLARD COLLECTION CRAFTSMANSHIP - ENHANCEMENT - SECURITY Assessed to ISO 9001 LPCB Certificate N o 932 SIMBARS Bollard Solutions Tel. 0117 9531444 Fax. 0117 9631444 email. info@simbars.co.uk

More information

FREE CUTTING STEELS.»11SMn30»11SMn37»11SMnPb30»11SMnPb37»36SMnPb14»38SMn28»44SMn28»46S20

FREE CUTTING STEELS.»11SMn30»11SMn37»11SMnPb30»11SMnPb37»36SMnPb14»38SMn28»44SMn28»46S20 FREE CUTTING STEELS»11SMn30»11SMn37»11SMnPb30»11SMnPb37»36SMnPb14»38SMn28»44SMn28»46S20 11SMn30 High machinability steel not destined to heat treatment (W. NR. 1.0715) CHEMICAL COMPOSITION: (heat analysis

More information

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4 DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD

More information

Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability

Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability Your Local Independent Supplier Serving the Construction Industry Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability 911001 LIVERSEDGE

More information

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing

More information

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS HOSE, TUBE, AND PIPE CLAMPS HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions 5 Heavy Duty Clamps

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

FlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process

FlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process Page 1(6) Fly Me CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods

More information

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No. Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available

More information

ANTENNA PARTS CATALOG

ANTENNA PARTS CATALOG ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine

More information

HARDWARE KENT Queen Street, Horsham, West Sussex, RH13 5AD Tel: Fax:

HARDWARE KENT Queen Street, Horsham, West Sussex, RH13 5AD Tel: Fax: HARDWARE Plain Nut Bright Zinc Plated DIN 934 Product Type Quality Size (A) No./Box P/N o Nut Plain Din 934 Gr.8 bright zinc 5mm 250 84760 Nut Plain Din 934 Gr.8 bright zinc 6mm 250 84761 Nut Plain Din

More information

TIE DOWNS CARGO CONTROL

TIE DOWNS CARGO CONTROL 138 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 139 140 620

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

Corrosive Protective Coatings

Corrosive Protective Coatings F A S T E N E R S Corrosive Protective Coatings Acknowledgement is made to the American Industrial Fasteners Institute for information in this article Corrosion Protective Coating Approximately 90% of

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

CHISELS / PUNCHES. Innovation is our mission!

CHISELS / PUNCHES. Innovation is our mission! CHISELS / PUNCHES Innovation is our mission! 1 PAGE FLAT CHISELS 680 TILER S FLAT CHISELS 681 SLITTING CHISEL 681 JOINTING CHISELS 681 BRICKLAYERS CHISEL 682 POINTED CHISELS 682 ELECTRICIANS CHISEL 682-683

More information

1958-64 FORD 9 REAR END INSTALLATION

1958-64 FORD 9 REAR END INSTALLATION by Randy Irwin 1958-64 FORD 9 REAR END INSTALLATION Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 30 years. He is a wizard at creating, making and modifying

More information

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS -

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - - STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - PART 1.01: MATERIALS STEEL: All steel material for the fence and gate system shall conform to the requirements of ASTM A- 787 and ASTM A653

More information

iglidur G The All-Round Performer iglidur G Phone Fax Maintenance-free, dry running High wear resistance

iglidur G The All-Round Performer iglidur G Phone Fax Maintenance-free, dry running High wear resistance iglidur G iglidur G The All-Round Performer Maintenance-free, dry running High wear resistance Resistance to dust and dirt Over 900 sizes available ex stock Cost-effective 2.1 iglidur G The All-Round Performer

More information

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com

More information

WHEEL ACCESSORY PRODUCT CATALOG

WHEEL ACCESSORY PRODUCT CATALOG WHEEL ACCESSORY PRODUCT CATALOG Why accessories for Alcoa Wheels? Maintaining your Alcoa Wheels in order to keep them in their best possible condition is and should be a top priority. Alcoa Accessory Products

More information

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2 TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION

More information

Vision In every field of activity, creating lasting brands. Mission Creating and sharing value for all partners in line with our principles

Vision In every field of activity, creating lasting brands. Mission Creating and sharing value for all partners in line with our principles Vision In every field of activity, creating lasting brands Mission Creating and sharing value for all partners in line with our principles About Us Hasçelik, with its mission to play a key role in special

More information

Gatorshield Steel Tubing

Gatorshield Steel Tubing steel tubing Gatorshield Steel Tubing ROUND STEEL TUBING Catalog # Size Gauge Bundle Qty. Price/Foot Price/Piece 014-108-288 1 x 24 18 127 $1.05 $25.20 014-104-288 1 x 24 14 127 $1.47 $35.28 014-104-276

More information

Die Grinders & Specialties:

Die Grinders & Specialties: Die Grinders & Specialties: Abrasives & Tools 3M Abrasives for Specialty Applications Application Metal Type Application Metal Type Product Name Blending Deburring Finishing Cleaning Polishing Stainless

More information

Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration

Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments

More information

TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR

TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before

More information

understand the fundamental of the gauges and their classifications, and

understand the fundamental of the gauges and their classifications, and UNIT 4 LIMIT GAUGING Structure 4.1 Introduction Objectives 4.2 Gauges and their Classifications 4.2.1 Standard Gauges 4.2.2 Limit Gauges 4.3 Working Gauges, Inspection Gauges and Reference Gauges 4.4 Gauges

More information

DTU Animal Cart Programme

DTU Animal Cart Programme DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523

More information

WHEEL BALANCING ACCESSORIES

WHEEL BALANCING ACCESSORIES WHEEL BALANCING ACCESSORIES Sarveshwari Engineers 355 Deepali, Pitampura, Delhi- 110034 Tel.: 011-27023750, 011-27021499, Fax: 011-270211629 Website : / Email : info@sarveshwari.com 1 1 110001 1 110011

More information

Progressive, modern, innovative that s what Brunswick Steel is all about.

Progressive, modern, innovative that s what Brunswick Steel is all about. REFERENCE CATALOGUE Progressive, modern, innovative that s what Brunswick Steel is all about. Established in 1970 as a family owned business, Brunswick Steel initially began as a demolition and salvage

More information

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Stainless Tubes Europe. Welded stainless steel tubes

Stainless Tubes Europe. Welded stainless steel tubes Stainless Tubes Europe Welded stainless steel tubes History 1901 Creation of the Company 1921 Beginning of the production of tubes 1967 First stainless steel tube 1988 La Meusienne joins the Usinor Group

More information

CR10-03 A-A-A-E-HQQE 3x230/400 50 HZ

CR10-03 A-A-A-E-HQQE 3x230/400 50 HZ GRUNDFOS DATA BOOKLET CR1-3 A-A-A-E-HQQE 3x23/4 5 HZ Grundfos Pump 965981 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965981/cr-1-3-a-a-a-e-hqqe.html

More information

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved.

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved. PROPER HANGING OF FIRE SPRINKLER SYSTEMS 2010 IFSA. All rights reserved. 1 HANGING PER NFPA 13 2 Historical developments and basic concepts Hangers Hanger installation Special listed pipe Hangers in earthquake

More information

FTS Industries Fasteners and Fixings

FTS Industries Fasteners and Fixings FTS Industries Fasteners and Fixings Fasteners and Fixings +27 11 878 2600 Rivets Aluminium Rivet Large Flange Aluminium Rivet CSK Rivet Peeled Rivet Aluminium Sealed Rivet Stainless Steel Rivet Multi-grip

More information

Cast-in Channels 9-1.

Cast-in Channels 9-1. Cast-in Channels 9-1 www.cfsfixings.com Contents Typical Channel Applications 9-3 Typical Cast-in Channel Anchor Variations 9-4 Cast-in Channel - Cold Rolled 9-5 Cast-in Channel - Hot Rolled 9-7 T-Bolts

More information

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No.

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No. Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 1 480mm Deluxe sliding jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs 1 5 min 790mm max Deluxe

More information

Technical Specification for Malleable Cast Iron Fittings

Technical Specification for Malleable Cast Iron Fittings Ergon Energy Corporation Limited Technical Specification for Malleable Cast Iron ETS-01-04-01 Check this is the latest Process Zone version before use. Specification ETS 01-04-01 Ver 1 Contents 1. Purpose

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information