Nuts - Washers - Threaded Rods - Snap in Hangers - Coax Entry Ground Bars - Cluster Support Brackets - Butterfly Hangers Boot Assemblies Buckles -
|
|
- Dwight Farmer
- 7 years ago
- Views:
Transcription
1 Nuts - Washers - Threaded Rods - Snap in Hangers - Coax Entry Ground Bars - Cluster Support Brackets - Butterfly Hangers Boot Assemblies Buckles - Hoisting Grips - Weatherproofing Kits - Grating Clips - Rubber Mats Bolts Washers - J-Bolts U-Bolts - Lightning Rods - Grounding Rods
2
3 Dear Valued Customer, Steelhead is pleased to add this full line of Hardware and Cable Accessories Catalog to its existing Site Steel, Pole, Tower, and Custom Structure product lines. Steelhead is proud to offer top quality products at competitive pricing. Steelhead partners quality products with exceptional customer service, a full engineering team, and an efficient production system that ensures our customers get the right solution delivered on time. If you can t find exactly what you re looking for in this catalog, be sure to call our Experienced, Qualified Sales staff. We will work with you to ensure your project is successful. Thank for choosing Steelhead! Mike Kreitzberg General Manager Steelhead Metal & Fab, LLC
4
5 Table of Contents Snap In Hangers... 1 Butterfly Hangers... 1 Cluster Blocks for Coax... 2 Angle Adapters... 2 Banding... 3 Buckles... 3 Tools... 3 Coax Blocks... 3 Round Member Adapter... 4 Filister Head Screws... 4 Internal Tooth Lock washers... 4 Standoff Adapter... 4 Hoisting Grips (pre laced)... 5 Hoisting Grips (lace up)... 5 Entry Panel for Coax... 6 Boot and Cushion Boot Assembly... 7 Cushion Inserts... 7 Cushion Plugs... 7 Buss Bars... 8 Buss Bar Mounting Hardware... 8 Clip On Grounding Kits... 9 Weatherproofing Kit Nylon Cable Ties Galvanized Spray Lightning Rods Ground Rods Ground Rod Clamps Copper Wire Grounding Lugs Crimp Tool Grounding Kit Grating Clips Rubber Mat G5 Bolt Assembly... 14,15 A325 Bolts Stainless Steel Bolts Galvanized & Stainless Steel Nuts Galvanized & Stainless Steel Lock washers Galvanized & Stainless Steel Flat washers Galvanized Pal nuts U Bolts J Bolt Assembly Jaw Bolt Assembly Step Bolt Assembly for Monopoles Threaded Rod Spacers... 24
6 SNAP-IN HANGERS Available in universal design that fits corrugated & smooth wall coax Stainless Steel Design Kit contains (10) Part # Description List Price SHS12 SNAP-IN HANGER 1/2 UNIVERSAL SST 10PK $10.00 SHS78 SNAP-IN HANGER 7/8 UNIVERSAL SST 10PK $12.00 SHS114 SNAP-IN HANGER 1-1/4 UNIVERSAL SST 10PK $12.00 SHS158 SNAP-IN HANGER 1-5/8 UNIVERSAL SST 10PK $12.00 SHS214 SNAP-IN HANGER 2-1/4 UNIVERSAL SST 10PK $17.00 BUTTERFLY HANGERS Stainless Steel Design Includes SS Screw & Nut for tightening Kit contains (10) SHB12 BUTTERFLY HANGER 1/2 SST 10PK $9.00 SHB78 BUTTERFLY HANGER 7/8 SST 10PK $11.00 SHB114 BUTTERFLY HANGER 1-1/4 SST 10PK $11.00 SHB158 BUTTERFLY HANGER 1-5/8 SST 10PK $11.00 SHB214 BUTTERFLY HANGER 2-1/4 SST 10PK $
7 CLUSTER BLOCKS FOR COAX Piece SH11202 MINI CLUSTER SUPPORT BRACKET 3 RUN $2.00 SH10635 CLUSTER SUPPORT BRACKET 7 RUN $9.00 SH11039 CLUSTER SUPPORT BRACKET 12 RUN $15.00 ANGLE ADAPTERS Stainless Steel Design Serrated teeth grab onto and hold steel surfaces Kit contains (10) SHAA1 ANGLE ADAPTER 3/4 HOLE $28.00 SHAA2 BEAM CLAMP TAPPED FOR 3/8 $28.00 Individually SHAA1 ANGLE ADAPTER 3/4 HOLE $4.00 2
8 BANDING SH10045 Stainless Steel 1/2 x.030 x 100 $50.00 BUCKLES SH10090 STAINLESS STEEL 1/2 BUCKLE 20/pack $8.00 SH10091 STAINLESS STEEL 1/2 BUCKLE 100/pack $38.00 TOOLS SH10673 COOL TOOL ISO $95.00 COAX BLOCKS Use 3/8 Mounting Hardware Kit contains (10) SHMB12 MINI BLOCK 1/2 $7.00 SHMB78 MINI BLOCK 7/8 $9.50 SHMB114 MINI BLOCK 1-1/4 $11.00 SHMB158 MINI BLOCK 1-5/8 $12.00 SHMB214 MINI BLOCK 2-1/4 $17.00 SHMB12-1S COAX BLOCK 1/2 HDW KIT SINGLE $12.00 SHMB12-2S COAX BLOCK 1/2 HDW KIT DOUBLE $13.00 SHMB12-3S COAX BLOCK 1/2 HDW KIT TRIPLE $14.00 SHMB78-1S COAX BLOCK 7/8 HDW KIT SINGLE $12.00 SHMB78-2S COAX BLOCK 7/8 HDW KIT DOUBLE $13.00 SHMB78-3S COAX BLOCK 7/8 HDW KIT TRIPLE $14.00 SHMB158-1S COAX BLOCK 1-5/8 HDW KIT SINGLE $12.00 SHMB158-2S COAX BLOCK 1-5/8 HDW KIT DOUBLE $13.00 SHMB158-3S COAX BLOCK 1-5/8 HDW KIT TRIPLE $
9 ROUND MEMBER ADAPTER / CLAMP HEAD CLAMP FITS 1-2 Ø SST $ CLAMP FITS 2-3 Ø SST $ * CLAMP FITS 3-4 Ø SST $ * CLAMP FITS 4-5 Ø SST $ * SH185 CLAMP FITS 2-7-1/2 Ø SST $ * CLAMP FITS 2-1/2-3-1/2 Ø SST $ * CLAMP FITS 3-1/2-4-1/2 Ø SST $ * Package contains (10) Clamp Head for 3/8 Hardware stainless steel $ * Clamp Head Shown FILISTER HEAD SCREWS Package contains (10) SST FILLISTER HEAD SCREW 3/8 x 3/4 $ * SST FILLISTER HEAD SCREW 3/8 x 1 $ * INTERNAL TOOTH LOCKWASHER Package contains (10) SST 3/8 INTERNAL TOOTH WASHER $ * STANDOFF ADAPTER 2 7/16 3/8 Tapped Hole Stainless Steel Kit contains (10) 1 3/4 SH STANDOFF ADAPTER $ * 1 11/16 * Please Call For Quote Adapter & Clamp Shown Together 4
10 HOISTING GRIPS (PRELACED) SHH12 HOISTING GRIP FOR 1/2 COAX $10.00 SHH78 HOISTING GRIP FOR 7/8 COAX $16.00 SHH114 HOISTING GRIP FOR 1-1/4 COAX $20.00 SHH158 HOISTING GRIP FOR 1-5/8 COAX $22.00 SHH214 HOISTING GRIP FOR 2-1/4 COAX $24.00 HOISTING GRIPS (LACE UP) SHHL12 HOISTING GRIP FOR 1/2 COAX $11.00 SHHL78 HOISTING GRIP FOR 7/8 COAX $17.00 SHHL114 HOISTING GRIP FOR 1-1/4 COAX $19.00 SHHL158 HOISTING GRIP FOR 1-5/8 COAX $21.00 SHHL214 HOISTING GRIP FOR 2-1/4 COAX $
11 ENTRY PANEL FOR COAX Sealing Caps and Mounting Hardware included Accepts 4 Boots 6061 T6 Aluminum SH220 COAX ENTRY 4 1 x 1 (7 x 7 ) $14.00 SH575 COAX ENTRY 4 1 x 4 (9-1/2 x 25-1/2 ) $50.00 SH1449 COAX ENTRY 4 2 x 3 (17-1/2 x 23 ) $70.00 SH576 COAX ENTRY 4 2 x 4 (17-1/2 x 25-1/2 ) $85.00 SH1118 COAX ENTRY 4 3 x 4 (25-1/2 x 25-1/2 ) $ SH1447 COAX ENTRY 4 4 x 4 (25-1/2 x 25-1/2 ) $ SHPCAP COAX ENTRY PORT CAP $0.85 NOTE: Custom entry panels available upon request BOOT AND CUSHION EPDM Rubber UV Resistant SH14164 BOOT ASSEMBLY 4 WITH (4) 1/2 HOLES $15.00 SH14177 BOOT ASSEMBLY 4 WITH (3) 5/8 HOLES $15.00 SH14140 BOOT ASSEMBLY 4 WITH (1) 7/8 HOLE $15.00 SH14141 BOOT ASSEMBLY 4 WITH (2) 7/8 HOLES $15.00 SH14142 BOOT ASSEMBLY 4 WITH (3) 7/8 HOLES $15.00 SH BOOT ASSEMBLY 4 WITH (1) 1-1/4 HOLE $15.00 SH14143 BOOT ASSEMBLY 4 WITH (1) 1-5/8 HOLE $15.00 SH14179 BOOT ASSEMBLY 4 WITH (1) 2-1/4 HOLE $
12 4 BOOT ASSEMBLY Includes (2) SST Clamps SH BOOT ASSEMBLY NO CUSHION INSERT $13.00 CUSHION INSERTS Each SH14149 INSERT 1/2 1 HOLE $2.00 SH14150 INSERT 1/2 4 HOLES $2.00 SH14151 INSERT 5/8 1 HOLE $2.00 SH14161 INSERT 7/8 1 HOLE $2.00 SH14154 INSERT 7/8 2 HOLES $2.00 SH14155 INSERT 7/8 3 HOLES $2.00 SH14156 INSERT 7/8 4 HOLES $2.00 SH14157 INSERT 1-1/4 1 HOLE $2.00 SH14158 INSERT 1-5/8 1 HOLE $2.00 SH14159 INSERT 2-1/4 1 HOLE $2.00 CUSHION PLUGS Kit contains (5) SH14160 INSERT PLUG 1/2 $0.75 SH14161 INSERT PLUG 7/8 $0.75 SH14162 INSERT PLUG 1-1/4 $0.75 SH14163 INSERT PLUG 1-5/8 $0.75 7
13 BUSS BARS Attaching Hardware Ordered Separately 1/4 Thick Plate SH RUN ¼ x 2 x 6 COPPER $15.00 SH RUN ¼ x 2 x 10 COPPER $18.00 SH RUN ¼ x 2 x 12 COPPER $20.00 SH RUN ¼ x 4 x 12 COPPER $34.00 SH RUN ¼ x 2 x 20 COPPER $28.00 SH RUN ¼ x 4 x 20 COPPER $50.00 SH RUN ¼ x 4 x 24 COPPER $70.00 SH15331-T 4 RUN ¼ x 2 x 6 TINNED COPPER $19.00 SH10526-T 10 RUN ¼ x 2 x 10 TINNED COPPER $24.00 SH15332-T 12 RUN ¼ x 2 x 12 TINNED COPPER $26.00 SH T 26 RUN ¼ x 4 x 12 TINNED COPPER $44.00 SH15333-T 23 RUN ¼ x 2 x 20 TINNED COPPER $38.00 SH15334-T 46 RUN ¼ x 4 x 20 TINNED COPPER $65.00 SH15335-T 56 RUN ¼ x 4 x 24 TINNED COPPER $85.00 Part # Description Price List SHBBS210 ¼ x 2 x 10 HOT DIP GALVANIZED STEEL $10.00 SHBBS412 ¼ x 4 x 12 HOT DIP GALVANIZED STEEL $20.00 SHBBS424 ¼ x 4 x 24 HOT DIP GALVANIZED STEEL $24.00 SHBBS430 ¼ x 4 x 30 HOT DIP GALVANIZED STEEL $30.00 BUSS BAR MOUNTING HARDWARE Part # Description Price List SH10654 SHELTER MOUNTING HARDWARE $12.00 SH11863 UNIVERSAL MOUNTING HARDWARE $17.00 SHGBBHT BUSS BAR TOWER MOUNTING KIT $
14 Typical Buss Bar hole sizes and spacing CLIP-ON GROUNDING KIT SH14175 KIT 1/2 WITH 60 LEAD UNATTACHED LUG $13.50 SH14146 KIT 7/8 WITH 60 LEAD UNATTACHED LUG $14.00 SH14145 KIT 1-¼ WITH 60 LEAD UNATTACHED LUG $16.00 SH14147 KIT 1-5/8 WITH 60 LEAD UNATTACHED LUG $14.00 SH14148 KIT 2-¼ WITH 60 LEAD UNATTACHED LUG $
15 WEATHER PROOFING KIT SHWU UNIVERSAL WEATHER PROOFING KIT $10.00 NYLON CABLE TIES UL Recognized Meets Military Specification Manufactured from 100% virgin-grade Nylon 6/6 Self-Extinguishing 94V-2 Operating temperature range of 40F to 185F UV resistant black (code-0) 100 per package Part # L W Max Bundle Min Loop Tensile Strength Dia. List Price SH lbs $ * SH /16 50 lbs $ * SH / /2 120 lbs $ * SH /3 175 lbs $ * SH /8 175 lbs $ * GALVANIZED REPAIR Meets ASTM A123 SH19470 ZRC GALVILITE COMPOUND 6lbs $ * SH12914 TOUCH UP SPRAY ON ZINC 13oz $ * * Please Call For Quote 10
16 LIGHTNING RODS SH10039 LIGHTNING ROD 5/8"OD x 48" GALV $8.00 SH12882 LIGHTNING ROD 5/8"OD x 60" GALV $10.00 GROUND RODS SH13183 GROUND ROD 5/8 OD x 8 COPPER CLAD $25.00 SH18275 GROUND ROD 5/8 OD x 8 GALV $13.00 GROUND ROD CLAMPS Connects 5/8 diameter ground rod to #2 - #6 wire ACORN GROUND ROD CLAMP 5/8 $ * COPPER WIRE Call for current pricing SH10309 #2 Bare Solid Tinned Copper $ * SH18278 #2 Bare Solid Copper Wire $ * SH18279 #2 Stranded Bare Copper Wire $ * SH18280 #6 Bare Solid $ * SH18281 #6 Stranded $ * * Please Call For Quote 11
17 GROUNDING LUGS Two Hole Code Conductor Long Barrel UL Listed 90 C 600 Volts to 35 KV Part # Wire Hole Size Hole Spacing List Price SH18270 #2 STRANDED 3/8 3/4 $1.00 SH18271 #2 SOLID 3/8 3/4 $1.00 SH18272 #6 STRANDED 3/8 7/8 $1.00 SH18273 #6 SOLID 3/8 1 $1.00 CRIMP TOOL SH18274 CRIMP TOOL $ * GROUNDING KIT Kit contains Full Cycle Mechanical Ratchet Hand Tool Variety of Standard 2 hole lugs SH18636 UNIVERSAL COMPRESSION GROUNDING KIT $ * * Please Call For Quote 12
18 GRATING CLIPS Galvanized GG-1A GRATING CLIPS FITS 1 DEEP GRATE $3.00 GG-1B GRATING CLIPS FITS 1-1/4 DEEP GRATE $3.25 GG-1C GRATING CLIPS FITS 1-1/2 DEEP GRATE $3.25 GG-1D GRATING CLIPS FITS 1-3/4 DEEP GRATE $3.25 RUBBER MAT UV Resistant 1/2 thick Rubber SH10034 RUBBER MAT 1/2 x 18 x 48 $
19 Grade 5 BOLT ASSEMBLY Galvanized Assembly includes Bolt, Nut & Lock Washer The Items in this section are Nonreturnable GR5 BOLT ASSEMBLY 3/8 x 3/4 $ GR5 BOLT ASSEMBLY 3/8 x 1 $ GR5 BOLT ASSEMBLY 3/8 x 1-1/4 $ GR5 BOLT ASSEMBLY 3/8 x 1-1/2 $ GR5 BOLT ASSEMBLY 3/8 x 1-3/4 $ GR5 BOLT ASSEMBLY 3/8 x 2 $ GR5 BOLT ASSEMBLY 3/8 x 2-1/4 $ GR5 BOLT ASSEMBLY 3/8 x 2-1/2 $ GR5 BOLT ASSEMBLY 3/8 x 2-3/4 $ GR5 BOLT ASSEMBLY 3/8 x 3 $ GR5 BOLT ASSEMBLY 3/8 x 3-1/4 $ GR5 BOLT ASSEMBLY 3/8 x 3-1/2 $ GR5 BOLT ASSEMBLY 3/8 x 3-3/4 $ GR5 BOLT ASSEMBLY 3/8 x 4 $ GR5 BOLT ASSEMBLY 3/8 x 4-1/2 $ GR5 BOLT ASSEMBLY 3/8 x 5 $ GR5 BOLT ASSEMBLY 3/8 x 5-1/2 $ GR5 BOLT ASSEMBLY 3/8 x 6 $ GR5 BOLT ASSEMBLY 1/2 x 1 $ GR5 BOLT ASSEMBLY 1/2 x 1-1/4 $ GR5 BOLT ASSEMBLY 1/2 x 1-1/2 $ GR5 BOLT ASSEMBLY 1/2 x 1-3/4 $ GR5 BOLT ASSEMBLY 1/2 x 2 $ GR5 BOLT ASSEMBLY 1/2 x 2-1/4 $ GR5 BOLT ASSEMBLY 1/2 x 2-1/2 $ GR5 BOLT ASSEMBLY 1/2 x 2-3/4 $ GR5 BOLT ASSEMBLY 1/2 x 3 $ GR5 BOLT ASSEMBLY 1/2 x 3-1/4 $ GR5 BOLT ASSEMBLY 1/2 x 3-1/2 $ GR5 BOLT ASSEMBLY 1/2 x 3-3/4 $ GR5 BOLT ASSEMBLY 1/2 x 4 $ GR5 BOLT ASSEMBLY 1/2 x 4-1/2 $ GR5 BOLT ASSEMBLY 1/2 x 5 $ GR5 BOLT ASSEMBLY 1/2 x 5-1/2 $
20 Grade 5 BOLT ASSEMBLY Galvanized Assembly includes Bolt, Nut & Lock Washer The Items in this section are Nonreturnable GR5 BOLT ASSEMBLY 1/2 x 6 $ GR5 BOLT ASSEMBLY 5/8 x 1-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 1-3/4 $ GR5 BOLT ASSEMBLY 5/8 x 2 $ GR5 BOLT ASSEMBLY 5/8 x 2-1/4 $ GR5 BOLT ASSEMBLY 5/8 x 2-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 2-3/4 $ GR5 BOLT ASSEMBLY 5/8 x 3 $ GR5 BOLT ASSEMBLY 5/8 x 3-1/4 $ GR5 BOLT ASSEMBLY 5/8 x 3-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 3-3/4 $ GR5 BOLT ASSEMBLY 5/8 x 4 $ GR5 BOLT ASSEMBLY 5/8 x 4-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 5 $ GR5 BOLT ASSEMBLY 5/8 x 5-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 5-3/4 $ GR5 BOLT ASSEMBLY 5/8 x 6 $ GR5 BOLT ASSEMBLY 5/8 x 7-1/2 $ GR5 BOLT ASSEMBLY 5/8 x 8 $ GR5 BOLT ASSEMBLY 3/4 x 1-3/4 $ GR5 BOLT ASSEMBLY 3/4 x 2 $ GR5 BOLT ASSEMBLY 3/4 x 2-1/4 $ GR5 BOLT ASSEMBLY 3/4 x 2-1/2 $ GR5 BOLT ASSEMBLY 3/4 x 2-3/4 $ GR5 BOLT ASSEMBLY 3/4 x 3 $ GR5 BOLT ASSEMBLY 3/4 x 3-1/4 $ GR5 BOLT ASSEMBLY 3/4 x 3-1/2 $ GR5 BOLT ASSEMBLY 3/4 x 3-3/4 $ GR5 BOLT ASSEMBLY 3/4 x 4 $ GR5 BOLT ASSEMBLY 3/4 x 4-1/2 $ GR5 BOLT ASSEMBLY 3/4 x 5 $ GR5 BOLT ASSEMBLY 3/4 x 5-1/2 $ GR5 BOLT ASSEMBLY 3/4 x 6 $ GR5 BOLT ASSEMBLY 3/4 x 6-1/2 $
21 A325 BOLT ASSEMBLY Galvanized Assembly includes Bolt, Nut & Lock Washer The Items in this section are Nonreturnable A325 BOLT ASSEMBLY 1/2 x 1-1/4 $ A325 BOLT ASSEMBLY 1/2 x 1-1/2 $ A325 BOLT ASSEMBLY 1/2 x 1-3/4 $ A325 BOLT ASSEMBLY 1/2 x 2 $ A325 BOLT ASSEMBLY 1/2 x 2-1/4 $ A325 BOLT ASSEMBLY 1/2 x 2-1/2 $ A325 BOLT ASSEMBLY 1/2 x 2-3/4 $ A325 BOLT ASSEMBLY 1/2 x 3 $ A325 BOLT ASSEMBLY 1/2 x 3-1/4 $ A325 BOLT ASSEMBLY 1/2 x 3-1/2 $ A325 BOLT ASSEMBLY 1/2 x 3-3/4 $ A325 BOLT ASSEMBLY 1/2 x 4 $ A325 BOLT ASSEMBLY 1/2 x 4-1/2 $ A325 BOLT ASSEMBLY 1/2 x 5 $ A325 BOLT ASSEMBLY 1/2 x 5-1/2 $ A325 BOLT ASSEMBLY 1/2 x 6 $ A325 BOLT ASSEMBLY 5/8 x 1-1/2 $ A325 BOLT ASSEMBLY 5/8 x 1-3/4 $ A325 BOLT ASSEMBLY 5/8 x 2 $ A325 BOLT ASSEMBLY 5/8 x 2-1/4 $ A325 BOLT ASSEMBLY 5/8 x 2-1/2 $ A325 BOLT ASSEMBLY 5/8 x 2-3/4 $ A325 BOLT ASSEMBLY 5/8 x 3 $ A325 BOLT ASSEMBLY 5/8 x 3-1/4 $ A325 BOLT ASSEMBLY 5/8 x 3-1/2 $ A325 BOLT ASSEMBLY 5/8 x 3-3/4 $ A325 BOLT ASSEMBLY 5/8 x 4 $ A325 BOLT ASSEMBLY 5/8 x 4-1/4 $ N/A A325 BOLT ASSEMBLY 5/8 x 4-1/2 $ A325 BOLT ASSEMBLY 5/8 x 5 $ A325 BOLT ASSEMBLY 5/8 x 5-1/2 $ A325 BOLT ASSEMBLY 5/8 x 6 $ A325 BOLT ASSEMBLY 5/8 x 7 $ A325 BOLT ASSEMBLY 5/8 x 8 $
22 A325 BOLT ASSEMBLY Galvanized Assembly includes Bolt, Nut & Lock Washer The Items in this section are Nonreturnable A325 BOLT ASSEMBLY 3/4 x 1-3/4 $ A325 BOLT ASSEMBLY 3/4 x 2 $ A325 BOLT ASSEMBLY 3/4 x 2-1/4 $ A325 BOLT ASSEMBLY 3/4 x 2-1/2 $ A325 BOLT ASSEMBLY 3/4 x 2-3/4 $ A325 BOLT ASSEMBLY 3/4 x 3 $ A325 BOLT ASSEMBLY 3/4 x 3-1/4 $ A325 BOLT ASSEMBLY 3/4 x 3-1/2 $ A325 BOLT ASSEMBLY 3/4 x 3-3/4 $ A325 BOLT ASSEMBLY 3/4 x 4 $ A325 BOLT ASSEMBLY 3/4 x 4-1/4 $ A325 BOLT ASSEMBLY 3/4 x 4-1/2 $ A325 BOLT ASSEMBLY 3/4 x 5 $ A325 BOLT ASSEMBLY 3/4 x 5-1/2 $ A325 BOLT ASSEMBLY 3/4 x 6 $ A325 BOLT ASSEMBLY 3/4 x 10 $ N/A A325 BOLT ASSEMBLY 3/4 x 6-1/2 $ N/A A325 BOLT ASSEMBLY 3/4 x 7 $ N/A A325 BOLT ASSEMBLY 3/4 x 8 $ N/A A325 BOLT ASSEMBLY 3/4 x 10-1/4 $ N/A A325 BOLT ASSEMBLY 3/4 x 10-1/2 $ N/A A325 BOLT ASSEMBLY 7/8 x 1-3/4 $ N/A A325 BOLT ASSEMBLY 7/8 x 2 $ A325 BOLT ASSEMBLY 7/8 x 2-1/4 $ A325 BOLT ASSEMBLY 7/8 x 2-1/2 $ A325 BOLT ASSEMBLY 7/8 x 2-3/4 $ A325 BOLT ASSEMBLY 7/8 x 3 $ A325 BOLT ASSEMBLY 7/8 x 3-1/4 $ A325 BOLT ASSEMBLY 7/8 x 3-1/2 $ A325 BOLT ASSEMBLY 7/8 x 3-3/4 $ A325 BOLT ASSEMBLY 7/8 x 4 $ A325 BOLT ASSEMBLY 7/8 x 4-1/4 $ A325 BOLT ASSEMBLY 7/8 x 4-1/2 $ A325 BOLT ASSEMBLY 7/8 x 5 $
23 A325 BOLT ASSEMBLY Galvanized Assembly includes Bolt, Nut & Lock Washer The Items in this section are Nonreturnable A325 BOLT ASSEMBLY 7/8 x 5-1/2 $ N/A A325 BOLT ASSEMBLY 7/8 x 6 $ N/A A325 BOLT ASSEMBLY 7/8 x 10-1/2 $ N/A A325 BOLT ASSEMBLY 7/8 x 14-3/4 $ N/A A325 BOLT ASSEMBLY 1 x 2-1/4 $ A325 BOLT ASSEMBLY 1 x 2-1/2 $ A325 BOLT ASSEMBLY 1 x 2-3/4 $ A325 BOLT ASSEMBLY 1 x 3 $ A325 BOLT ASSEMBLY 1 x 3-1/4 $ A325 BOLT ASSEMBLY 1 x 3-1/2 $ A325 BOLT ASSEMBLY 1 x 3-3/4 $ A325 BOLT ASSEMBLY 1 x 4 $ A325 BOLT ASSEMBLY 1 x 4-1/4 $ A325 BOLT ASSEMBLY 1 x 4-1/2 $ A325 BOLT ASSEMBLY 1 x 4-3/4 $ A325 BOLT ASSEMBLY 1 x 5 $ A325 BOLT ASSEMBLY 1 x 5-1/2 $ A325 BOLT ASSEMBLY 1 x 6 $ A325 BOLT ASSEMBLY 1 x 6-1/2 $ N/A A325 BOLT ASSEMBLY 1-1/4 x 7 $ N/A A325 BOLT ASSEMBLY 1-1/4 x 25 $ N/A A325 BOLT ASSEMBLY 1-1/2 x 4-1/2 $ N/A A325 BOLT ASSEMBLY 1-1/2 x 6 $ N/A A325 BOLT ASSEMBLY 1-1/2 x 7-1/2 $ N/A 18
24 STAINLESS STEEL BOLTS TYPE 304 SS BOLT 1/4 x 1 $ BOLT 1/4 x 1-1/4 $ BOLT 1/4 x 1-1/2 $ BOLT 1/4 x 1-3/4 $ BOLT 1/4 x 2 $ BOLT 1/4 x 2-1/2 $ BOLT 1/4 x 3 $ BOLT 3/8 x 1 $ BOLT 3/8 x 1-1/4 $ BOLT 3/8 x 1-1/2 $ BOLT 3/8 x 1-3/4 $ BOLT 3/8 x 2 $ BOLT 3/8 x 2-1/4 $ BOLT 3/8 x 2-1/2 $ BOLT 3/8 x 3 $ BOLT 1/2 x 1 $ BOLT 1/2 x 1-1/2 $ BOLT 1/2 x 2 $1.60 GALVANIZED & STAINLESS STEEL NUTS TYPE 304 SST GALV SST Part # GALV Part # A563-GR A Size List Price List Price N/A 1/4 $0.10 $ N/A /8 $0.15 $ /2 $0.30 $ /8 $0.50 $ /4 $0.75 $
25 GALVANIZED & STAINLESS STEEL LOCK WASHERS SS Part # GALV Part # Description SS List Price GALV List Price LOCK WASHER 3/8 $0.07 $ LOCK WASHER 1/2 $0.12 $ LOCK WASHER 5/8 $0.35 $ LOCK WASHER 3/4 $0.50 $0.15 GALVANIZED & STAINLESS STEEL FLAT WASHERS SS Part # GALV Part # Description SS List Price GALV List Price N/A FLAT WASHER 1/4 $0.03 $ N/A FLAT WASHER 3/8 $0.05 $ FLAT WASHER 1/2 $0.15 $ FLAT WASHER 5/8 $0.30 $ FLAT WASHER 3/4 $0.40 $0.26 GALVANIZED PAL NUTS GALV PAL NUT 1/2 $ PAL NUT 5/8 $ PAL NUT 3/4 $ PAL NUT 7/8 $
26 U-BOLTS Galvanized W L T U-Bolt Assembly includes: 1 U-Bolt 2 Nuts 2 Flat Washers 2 Lock Washers D Part # Fits Pipe Size D W L T List Price OD 1/ $ OD 1/ /2 2 $ /8 OD 1/2 2-1/2 4 2 $ /8 OD 1/2 2-1/2 5 2 $ /8 OD 1/ $ N/A /8 OD 1/ $2.50 The Items in this section are Nonreturnable /8 OD 1/ /2 2-1/2 $ /8 OD 1/ /2 $ /2 OD 1/2 3-5/ /2 $ /2 OD 1/2 3-5/ /2 $ OD 1/2 4-1/ /2 $ OD 5/8 4-1/ /2 $ OD 5/8 4-1/ /2 $ /2 OD 1/2 4-5/ /2 $ /2 OD 1/2 4-5/ /2 $ /2 OD 5/8 4-5/8 6-1/2 2-1/2 $ /2 OD 5/8 4-5/8 7-1/2 2-1/2 $ /2 OD 5/8 4-5/8 8 3 $ /16 OD 5/8 5-3/4 8 3 $ /16 OD 5/8 5-3/4 9 3 $ /8 OD 5/8 6-3/4 9 3 $ /8 OD 5/8 6-3/ $ /8 OD 5/8 8-3/ $ /4 OD 5/ $ N/A /4 OD 5/ $ N/A 21
27 J-BOLT ASSEMBLY Galvanized The Items in this section are Nonreturnable J-BOLT ASSEMBLY 3/8 x 2 $ J-BOLT ASSEMBLY 3/8 x 4 $ J-BOLT ASSEMBLY 3/8 x 6 $ J-BOLT ASSEMBLY 3/8 x 8 $ J-BOLT ASSEMBLY 3/8 x 10 $ J-BOLT ASSEMBLY 3/8 x 12 $ J-BOLT ASSEMBLY 1/2 x 4-1/2 $ J-BOLT ASSEMBLY 1/2 x 4 $ J-BOLT ASSEMBLY 1/2 x 9 $ N/A J-BOLT ASSEMBLY 3/4 x 12 $ N/A JAW-BOLT ASSEMBLY Galvanized JAW BOLT ASSEMBLY 1/2 STANDARD $ N/A JAW BOLT ASSEMBLY 1/2 x 4 RT HD THREAD $ JAW BOLT ASSEMBLY 1/2 x 4 LT HD THREAD $ JAW BOLT ASSEMBLY 1/2 x 4-1/2 $ N/A The Items in this section are Nonreturnable 22
28 STEP-BOLT ASSEMBLY FOR MONOPOLES Galvanized STEP BOLT ASSEMBLY 5/8 x 8-1/4 $2.50 THREADED ROD Available in both Stainless Steel and Galvanized SS THREADED ROD 3/8 x 3 $ SS THREADED ROD 3/8 x 12 $ SS THREADED ROD 3/8 x 24 $ SS THREADED ROD 3/8 x 36 $ A36 THREADED ROD 3/8 x 4-1/4 $ A36 THREADED ROD 3/8 x 6 $ A36 THREADED ROD 3/8 x 7 $ A36 THREADED ROD 3/8 x 9 $ A36 THREADED ROD 3/8 x 12 $ A36 THREADED ROD 3/8 x 24 $ A36 THREADED ROD 1/2 x 6 $ A36 THREADED ROD 1/2 x 12 $ A36 THREADED ROD 1/2 x 120 $ A36 THREADED ROD 5/8 x 12 $ A36 THREADED ROD 5/8 x 13 $ A36 THREADED ROD 5/8 x 16 $ A36 THREADED ROD 5/8 x 20 $ A36 THREADED ROD 3/4 x 12 $ A36 THREADED ROD 3/4 x 120 $ A193 B7 THREADED ROD 3/4 x26 HIGH STRENGTH $
29 SPACERS Part # Description Shape List Price /16 SPACER WITH 11/16 HOLE SQUARE $ /16 SPACER WITH 7/16 HOLE 2 OD ROUND $ /4 SPACER WITH 9/16 HOLE ROUND $ /4 SPACER WITH 11/16 HOLE ROUND $ /4 SPACER WITH 13/16 HOLE ROUND $ /8 SPACER WITH 9/16 HOLE ROUND $ /8 SPACER WITH 11/16 HOLE ROUND $ /2 SPACER WITH 11/16 HOLE ROUND $ /2 SPACER WITH 13/16 HOLE ROUND $
30
31
32 ALONG WITH STEELHEAD S FULL LINE OF COMPONENT PRODUCTS FOR THE WIRELESS INDUSTRY, WE ALSO DESIGN AND PRODUCE: Wireless Structures Self Support Towers, Tapered Monopoles and Pipe Poles Commercial Structural Steel, Support Poles and Frames Utilities Sub-Station Steel, Transmission Towers and Transmission Poles D.O.T. Sign Bridges, VMS Poles and Bridges and Break-Away Sign Supports Call us today for a free quote for all of your Steel Application needs! For Site Steel, see our Site Steel Product Catalog! Local Fax Toll Free Steelhead Metal & Fab All Rights Reserved
I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
More informationCable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
More informationInstallation Materials
Installation Materials Installation Materials TABLE OF CONTENTS ADAPTER BRACKETS 13 45 Adapter Kit 13 Adapter Bracket 13 Mini Adapter Bracket 13 Stainless Steel Adapter Bracket 13 All-Thread Rod - Gold
More information1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More information1-2 Pair Drop Wire Clamp
ADH -2 Pair Drop Wire Clamp Clamps, Drop Neoprene Shim Dimpled Shim Serrated Shim Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. Aluminum
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationNORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS
SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications
More informationINSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationCable Tie Mounting Bases
Temperature Rating: 0ºC to 66ºC (32ºF to 150ºF) *Synthetic Rubber Adhesive Choose from adhesive-backed, epoxy or screw mounting bases! Available in a variety of materials for both indoor and outdoor use
More informationCoaxial Cable Installation Accessories
Installation Instructions Bulletin 37608 Coaxial Cable Installation Accessories Hoisting Grips for Coaxial Cable and Elliptical Waveguide READ ALL WARNINGS AND INSTRUCTIONS BEFORE INSTALLATION Antenna
More information1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
More informationInstallation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationComplete System Shelter
Complete System Shelter For Weather Console Installations The weather resistant Complete System Shelter (CSS) provides protection from the elements for system components such as the Vantage Pro2 and Vantage
More informationDB 18 & DB 18E Options
DB 8 & DB 8E Options Assembly Manual Boom Truss Element Truss 6m Passive Inventory check DB 8 & DB 8 E Boom Truss Kit 7-004-0 QTY Part # Description 6 60-0045 /6 wire clips 4 60-0048 /6 Thimble 4 60-0044
More informationRE-ENTERABLE SPLICE CLOSURE KITS. (For Air Core None Pressurized Cable)
Triple T Broadband Public Co., Ltd. Outside Plant Standard Sector Specification No. OES-001-027-04 Issued: RE-ENTERABLE SPLICE CLOSURE KITS (For Air Core None Pressurized Cable) 1. SCOPE 1.1. This specification
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationFittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More information18 AWG thru 8 AWG Not greater than 100/30 100/30. 6 AWG thru 1/0 AWG Not greater than 200/60 100/30
Commercial Products COMMERCIAL PRODUCTS: RIGID AND IMC FITTINGS s Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels,
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationRPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130
RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationDuring severe flood events, such as those
Recommended Practice for Home Heating Oil Tank Flood Resistance During severe flood events, such as those occurring from Hurricane Irene and Super- Storm Sandy, many coastal and low elevation inland areas
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationAMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationINSTALLATION INSTRUCTION SPEC. SHEET 7/00. City of New York Calendar #40747 ETL LISTED UNDER U.L. STD. 2108 LOW VOLTAGE TRACK LIGHTING SYSTEM
7/00 INSTALLATION INSTRUCTION SPEC. SHEET 99052 99063 City of New York Calendar #40747 Copyright c 2000 ALFA Lighting, Inc. All rights reserved. Call:1-415-975-8080 QUICK JACK QJS R LISTED 9901483 ETL
More informationMounting Tripod Kit Installation Manual
Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationEUPEN Cable Inc. North & South America
toronto EUPEN Cable Inc. North & South America Bethlehem, PA dallas, tx Mexico city Tampa Bay EUPEN CABLE INC. Table of Contents ELLIPTICAL WAVEGUIDE and Connectors.................................................5
More informationACTIV-8 PLUS Insulated Conductor Bar
ACTIV-8 PLUS Insulated Conductor Bar A product made in Australia www.conductix.com.au ACTIV-8 PLUS ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It was designed by Conductix
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationCable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
More informationStructureScan Installation
StructureScan Installation Contents Your StructureScan box is packed with the LSS-1 black box, a Power cable, StructureScan transducer, mounting bracket, 15 foot (4.5m) ethernet cable and a hardware kit.
More informationExclude all sales to foreign countries and all sales or transfers to other divisions or plants of your company. Survey Form 3.3.
(703) 81-3200 Electrical Connector Section - Underground Distribution Type Cable Connectors and Accessories Voting Classification (8-CC-IV) Domestic Net Sales Billed of Connectors for Residential and Medium
More informationM2 Antenna Systems, Inc. Model No: KT34M2
M2 Antenna Systems, Inc. Model No: KT34M2 10m f, MHz G, dbi F/B, db 28.0 7.3 18 28.2 7.3 23 28.4 7.4 25 28.6 7.5 24 29.2 7.6 20 15m f, MHz G, dbi F/B, db 21.0 6.9 19 21.1 6.9 22 21.2 7.0 24 21.3 7.0 24
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationAM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
More informationTMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations
TMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations CableReady connectors are designed for use with the following cables: Type MC jacketed corrugated aluminum, interlocked
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationPEARL Instruction Manual http://www.pearldrum.com
PEARL Instruction Manual Congratulations on your purchase! To get optimum performance of your E-PRO Live Drums, please read this Instruction Manual before playing. http : //www.pearldrum.com Products and
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationPARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS
PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS Merco Contempo Warmer Lamps offer graceful, dramatic styling to match any décor. They are made of exacting tolerance from heavy duty, solid, mandrelspun
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationJumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar
BJ Jumper bar Use the BJ jumper bar to connect consecutive and nonconsecutive terminal blocks with the same spacing. Two types of jumper bars are available : an assembled unit and a nonassembled unit.
More informationInstallation Instructions Avalanche XUV Cap IMPORTANT! IMPORTANT!
Installation Instructions Avalanche XUV Cap IMPORTANT! Read all instructions carefully before commencing any work. Always wear safety equipment. Some installation steps will require two or more installers.
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationCUSTOM AUXILIARY FORWARD LIGHTING KIT
-J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional
More informationVertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
More informationElectrical Safety Products
Electrical Safety Products Trelleborg Electrical Safety Products A safe working environment is important in all industries, but in the electrical generation and supply industry, it is paramount. Trelleborg
More informationPIPE SUPPORT & ALIGNMENT SYSTEM CATALOG
PIPE SUPPORT & ALIGNMENT SYSTEM CATALOG Catalog 611 The Fastest and Most Economical Method to Postion and Support Plumbing Chase Piping. The Sumner Pipe Support System is designed to eliminate the problems
More information2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationELECTRICAL CONNECTORS
ELECTRICAL CONNECTORS 07-09 00-09 04-09 99-09 116 ELECTRICAL CONNECTORS LIGHT POWER MODULES WORKS WITH STANDARD & LED BULBS! WORKS WITH STANDARD & LED BULBS! CALL US TODAY FOR YOUR MODULITE VEHICLE APPLICATION
More informationCat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationLightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationIRRIGATION PUMPING Table of Contents - Section 900
IRRIGATION PUMPING Table of Contents - Section 900 PARAGRAPH 900.1 GENERAL 1 900.2 METERING REQUIREMENTS 1 900.3 CUSTOMER S CONTROL EQUIPMENT 2 900.4 SERVICE CONDUCTOR REQUIREMENTS 2 900.5 RECOMMENDATIONS
More informationMueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationA product made in Australia. Insulated Conductor Rail ACTIV-8 PLUS
A product made in Australia Insulated Conductor Rail ACTIV-8 PLUS ACTIV-8 PLUS The Industry Standard in Conductor Rails ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationLSA-PLUS Series 2 Connection and Disconnection Modules and Accessories
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories 2015 PRODUCT CATALOG 2ND EDITION LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories A technically and commercially
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
More informationEZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather
More informationResidential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationPV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY
PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More information