2S-Series Sub-Miniature Toggle Switches

Transcription

1 Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance mω max. - VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +8 C Index of Protection SS & SM-Series: IP67 Solder Heat Resistance... MIL-STD-0, Method 0 Actuator Travel Materials Case all UL 9 V-0 S-Series: Dially phthalate (DAP) SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized SM-Series: Glass filled nylon /6, flame retardant, heat stabilized Toggle S-Series: Brass, chrome plated. SS & SM-Series: Brass, chrome plated or nylon, internal o-ring sealed Bushing S-Series: Brass, nickel plated SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 9V-0) SM-Series: Glass filled nylon /6, flame retardant, heat stabilized (UL 9V-0) Housing Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy S - MSP - T - B - Q E Series Poles Circuit Actuator Style Bushing 6 Termination 7 Contact 8 Seal 6 TERMINATI M Solder Lug M PC Mount, 90 horizontal PC Mount, 90 vertical VS PC Mount, U bracket,.60 mounting x.60 high PC Mount, U bracket,.60 mounting x.60 high VS Snap-In, U bracket SERIES S Sub-Miniature Toggle Switch POLES MSP single pole - uses terminals, &. MDP double pole uses terminals,,,, & 6. CIRCUIT ( ) - momentary Switching Position: -, -6 () ACTUATOR STYLE T Round toggle length T Round toggle.0 length BUSHING B B B B B B6 B7 B8 OPEN NE NE OFF OFF OFF -, - () () () T Round toggle.99 length T Round toggle. length Threaded Standard, keyway Non-Threaded Standard, keyway Threaded Short, keyway Non-Threaded Short, keyway High Torque, 7.mm, flat High Torque, 8.0mm, keyway Long threaded Metric Note: All Switches come with standard nut, washer and locking ring shipped bulk. B & B7 bushing styles use small locking ring. 7 CTACT Material Terminal Plating Rating gold over silver A@VAC or 8VDC, G 0VAC K gold tin-lead 0.VA max P silver tin-lead A@VAC or 0VAC Q silver silver A@VAC or 0VAC R gold gold 0.VA max Approvals UL CSA UL CSA UL CSA Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate Moveable contact & terminals: copper alloy with gold plated over nickel plate Terminals: silver plate with outer layer in gold plating Outer terminals: copper alloy with tin-lead over nickel plate 8 EPOXY SEAL E epoxy seal

2 SS-Series Ordering Scheme SS - MSP - T - B - G Series Poles Circuit Actuator Style Bushing 6 Termination 7 Contact E 8 Seal SERIES SS Sealed Sub-Miniature Toggle Switch POLES MSP single pole - uses terminals, &. MDP double pole uses terminals,,,, & 6. CIRCUIT ( ) - momentary Switching Position: -, -6 OPEN -, - NE NE () OFF () OFF () OFF () ACTUATOR STYLE T Round toggle length T Round toggle.0 length T Round toggle.99 length T Round toggle. length BUSHING B Unthreaded bushing P ESD resistant plastic toggle. length P ESD resistant plastic toggle.7 length 6 TERMINATI M PC Mount, 90 horizontal Snap-In PC Mount, 90 horizontal PC Mount, 90 vertical Snap-In PC Mount, 90 vertical VS PC Mount, U bracket,.60 mounting x.60 high VS Snap-In, U bracket 7 CTACT Material Terminal Plating Rating G silver gold over silver A@VAC or 8VDC, 0VAC K gold tin-lead plated 0.VA max IP67 P silver tin-lead plated A@VAC or 8VDC, 0VAC R gold gold plated 0.VA max IP67 Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate Moveable contact & terminals: copper alloy with gold plate over nickel plate Terminals: silver plate with outer layer in gold plating Outer terminals: copper alloy with tin-lead over nickel plate 8 EPOXY SEAL E epoxy seal SM-Series Ordering Scheme SM - MSP - T - G Series Poles Circuit Actuator Style Termination 6 Contact E 7 Seal 8 Packaging SERIES SM Sealed Surface Mount Sub-Miniature Toggle Switch POLES MSP single pole - uses terminals, &. CIRCUIT ( ) - momentary Switching Position: - OPEN - NE NE () OFF () OFF () OFF () ACTUATOR STYLE T Round toggle length T Round toggle.0 length P ESD resistant plastic toggle. length P ESD resistant plastic toggle.7 length TERMINATI Surface Mount, 90 flat Surface Mount, 90 vertical S6 Surface Mount, 90 horizontal 6 CTACT Material Terminal Plating Rating G silver gold over silver A@VAC or 8VDC, 0VAC K gold tin-lead plated 0.VA max IP67 P silver tin-lead plated A@VAC or 8VDC, 0VAC R gold gold plated 0.VA max IP67 Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate Moveable contact & terminals: copper alloy with gold plate over nickel plate Terminals: silver plate with outer layer in gold plating Outer terminals: copper alloy with tin-lead over nickel plate 7 EPOXY SEAL E epoxy seal 8 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel - 00 pieces per reel

3 S-Series Dimensional Specifications: in. [mm] S-Series ACTUATOR T T Round Short Bat [9.0].0.99 [7.60] T T Long. [.00] BUSHING B Threaded, Flat B Threaded, Flat B Non-Threaded, Flat.7 FLAT 0-8 UNS.7 [.0] B6 Non-Threaded, Flat.76 DIA [Ø 7.00]. FLAT [.70] /-0 UNS. [7.90] B Threaded Keyway B Non-Threaded Keyway.0 [0.80] 0-8 UNS B7 Threaded Keyway B8 Non-Threaded Keyway [.00] /-0 UNS.7 [.0].8 DIA [Ø 7.0].60 [6.60].08 [0.] PANEL MOUNTING 0-8 BUSHING (B,B,B,B BUSHINGS) / IN. BUSHING (B,B6,B7,B8 BUSHINGS).0 [0.8].9 DIA [Ø.9].9 DIA [Ø.9].0 [6.0].0 [0.8].0 DIA [Ø 6.].0 DIA [Ø 6.].0 [6.0].0 DIA [Ø 6.].00 [0.] Without Locking Ring.79 [.].9 DIA [Ø.9].09 DIA [Ø.8] With Small Locking Ring.0 [0.] Without Locking Ring. [.9].09 DIA [Ø.8] With Small Locking Ring SS-Series ACTUATOR T T T T P ESD Resistant Plastic Toggle P ESD Resistant Plastic Toggle. [0.70].0 [6.0]. [8.70].. [0.70].68 [6.80] BUSHING B.77 [.0].77 DIA [Ø.0] Subtract.mm from toggle length for B bushing.

4 S-Series Dimensional Specifications: in. [mm] TERMINATI S-Series M Standard Solder Lug.09.8 [.0] [.00].8 [.00] M.0 [Ø.09] M Standard Solder Lug [.00].8 [.00].8 [.00] M.0 [Ø.09].08 [0.70] Thk..06 [.] Thk..06 [.].8 Thk. Thk. SS-Series M Epoxy Seal Epoxy Seal. [.0].0 [.0] S-Series [8.0] [Ø.09] DIA.0 [0.90].89 DIA.06.0 [0.8].0 [.0] DIA.7.89 DIA.0.0 [0.8].06 [9.0].9 [8.0] [Ø.09] 6

5 S-Series Dimensional Specifications: in. [mm] TERMINATI [.0] DIA.89 DIA.9 [8.0] [Ø.09].06 DIA.7.89 DIA.0.9 [8.0] [9.0] [Ø.09].06 VS- U Bracket Snap-in.89 DIA.0 VS.0 [8.90] DIA. [8.00].0 [9.0] [.].00 [0.6] [Ø.09].00 [0.6] VS [Ø.09].00 [0.6] VS.89 DIA.0.0 [8.90] DIA. [8.00].0 [9.0] [.].00 [0.6] [Ø.09].00 [0.6] VS [Ø.09].00 [0.6] SNAP-IN TERMINATI VS,,VS have the same P.C. mounting but with snap-in bracket. 7

6 SM-Series Dimensional Specifications: in. [mm] ACTUATOR T T P ESD Resistant Plastic Toggle P ESD Resistant Plastic Toggle. [0.80].0 [6.0]. [0.80].68 [6.80] For S6, Only TERMINATI 90 Horizontal.77 DIA [Ø.0].9 [8.0].9 [9.98]. [.60].6 [.7] [.0] [7.7].0 [6.0].6 [.0] EPOXY SEAL.6 [.0].80 [7.0]. [.6].0 [.6].080 [.0].0 [.8].090 [.9].00 [.0].00 [.0].080 [.0].8 [.].7 [9.07] 90 Vertical.77 DIA [Ø.0].8 [.00].0 [6.0].6 [.0].66 [9.0] EPOXY SEAL.80 [7.0].7 [.0].6 [.0] [.00]. [.8]. [.8].7 [.9].6 [8.7].6 [.] [.00].06 [.60] S6 90 Horizontal.77 DIA [Ø.0].9 [8.0]. [.60].6 [.7].0 [6.0] [.0].06.6 [.0]. [8.97] EPOXY SEAL.6 [.0].80 [7.0]. [.6].0 [.6].080 [.0].0 [0.80].00 [.0] [.00].8 [.]. [0.70] 8

7 SM-Series Dimensional Specifications: in. [mm] REEL TAPING.8 [.80]. [8.0].069 [.7].8 [.00].09 DIA [Ø.0].0 [0.].89 [0.80]. [0.] DIA [Ø.00] [.0].60 [.00].8 [8.0].88 [.0]. [.0] [6.0] FOR LY.7 [6.90].07 [.80].8.06 DIA [Ø.60].9 [0.00]. [9.00].0 [7.7]. [8.0].0 [.80].7 [.00].98 [0.60] 6.0 [.0].97 [.00].86 [9.80].9 [.00] [.0].866 [.00].6 [6.0].0 [0.]. [8.00]. [6.0] FOR LY.60 [6.60].97 [.00].069 [.7].8 [.00].09 DIA [Ø.0] [.70]. [0.70].09 DIA [Ø.0] [.00].60 [.00].8 [8.0].88 [.0].9 [.0].9 [8.60].7 [.00] [7.0]. [6.0] FOR S6 LY 9