UL 489 DIN rail branch circuit breakers

Transcription

1 UL 89 DIN rail branch circuit breakers FAZ-NA circuit breakers ACCESSORY TECHNICAL DATA Shunt trip release FAZ-XAA-NA Remote release for subsequent mounting onto FAZ-NA/RT Additional installation of standard auxiliary switch is possible Position indicator red green Connection Diagram Busbar block UL 89 (pin) Tested according to UL 89 Do not cut Extension terminal mm Z-EK//UL for copper conductors Incoming terminal 0 mm Z-EB/0/UL For covering of not used pins, use busbar tag shrouds ZV-BS-UL Connection Diagram Three-Pole Busbar Two-Pole Busbar Single-Pole Busbar Shunt Trip Release FAZ-XAA-NA Description FAZ-XAA-NA-0VAC FAZ-XAA-NA0-VAC Electrical Can be mounted onto FAZ-NA / FAZ-NA-DC / FAZ-RT FAZ-NA / FAZ-NA-DC / FAZ-RT Operational voltage range 0 Vac 0 Vdc 0 Vac 0 0 Vdc Frequency 0/0 Hz 0/0 Hz Mechanical Frame size mm mm Device height 0 mm 0 mm Device width 7. mm 7. mm Mounting Quick fastening with two lock-in positions on EN 00 Degree of protection, IP IP built-in Terminal protection Finger and hand touch safe according to BGV A, ÖVE-EN Terminals Open mouthed/lift Open mouthed/lift Terminal capacity One and two wires 8 0 AWG 8 0 AWG Busbar Block UL 89 (Pin) Description UL 89 IEC/EN 097- Electrical Rated operational voltage 80/77 Vac Rated frequency 0/0 Hz Rated voltage 80 Vac 90 Vac Overvoltage category III Rated impulse 9. kv withstand voltage U imp Rated current 80A at C 80A at 0 C Rated conditional shortcircuit ka current AC with 0A gg Short-circuit current 0 ka Mechanical Busbar cross section mm Cu Flame class according to V0 UL 9 Pollution degree Comparative tracking index CTI 00 Minimum clearance > 9./. mm (internal/external) Minimum creepage distance (internal/external) >.7/0.8 mm Resistance to climatic conditions According to DIN/EN 008 Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers

2 UL 077 DIN rail supplementary protectors Product Overview Optimum and efficient protection UL 077 DIN rail supplementary protectors Features PRODUCT OVERVIEW Complete range of UL 077 recognized DIN rail mounted miniature circuit breakers up to A current rating Standard ratings of 0 kaic up to 77/80 Vac Current limiting design provides fast short-circuit interruption that reduces the let-through energy, which can damage the circuit Suitable for supplementary protection Thermal-magnetic overcurrent protection Optimum product quality, tested reliability and safety stand for best protection of personnel, installations and plant. Eaton s FAZ DIN rail mountable circuit breaker is designed for use in control panel applications. Powerful offering for machine and system builders The FAZ is available with B, C, D, K, S, and Z characteristics in accordance with UL 077, CSA C. No. and IEC These devices are CE marked. Typical applications Supplementary protection Control circuits Lighting Business equipment Appliances Six levels of short-circuit protection, categorized by B, C, D, K, S, and Z curves Trip-free design breaker can not be defeated by holding the handle in the ON position Captive screws cannot be lost Fulfill UL 077, CSA C. No. and also IEC 097- Standard Field-installable shunt trip and auxiliary switch subsequent mounting Module width of only 7.7 mm (per pole) Contact position indicator (red/green) Easy installation on DIN rail Possibility for sealing the toggle in ON or OFF position FAZ complies with the latest national and international standards Standards Supplementary Protection UL 077, CSA C. No. Apply to supplementary protectors intended for use as overcurrent, or overvoltage or undervoltage protection within an appliance or other electrical equipment where branch circuit protection is already provided, or is not required. RoHS These devices are RoHS compliant. VDE Devices with B, C, and D curves are VDE compliant. CCC Devices with B, C, and D curves are CCC compliant. ABS These devices are ABS compliant. Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers 7

3 UL 077 DIN rail supplementary protectors PRODUCT OVERVIEW Discover these advanced features Breakers install on standard DIN rail Available in one-, two-, three-, four-pole, +N and +N models Color-coded indicator provides breaker status for easy troubleshooting Captive Posidrive terminal screws with finger and back-of-hand protection (IP0) Trip-free design; breaker cannot be defeated by holding the handle in the ON position Breaker information printed on the front of the device for quick identification Six tripping curves to choose from Eaton FAZ supplementary protectors are available with six different tripping characteristics, including Type B, C, D, K, S, and Z. Definitions for each trip curve are contained on the ordering pages and can be used to determine the optimal characteristic for your application. For example, low-level short-circuit faults in control wiring, such as PLCs, are best protected by devices with Type B trip characteristics ( X continuous rating of the device (I n ). Even though not required by NEC or CEC for supplementary protectors, Eaton s FAZ devices are current limiting, which means that they interrupt fault currents within one half cycle. Current limiting devices offer superior protection by reducing peak let-through current and energy. t (sec) Time-current characteristic acc. to UL 077 a Conventional non-tripping current I nt =. I N : t > h c. I N : t = 0 s (I N < A) t = 0 s (I N < A) b Conventional tripping d Type B: I N : t > 0. s 00 current e Type B: I I t =. I N : t < h N : t < 0. s f 0 Type C: I N : t > 0. s 0 g Type C: 0 I N : t < 0. s 0 h Type D: 0 I N : t > 0. s 0 i Type D: 0 I N : t < 0. s D Z B C K S I/I n ing System FAZ - C / SP Breaker Family FAZ = Supplementary protector Trip Characteristic B = X I a n C = 0X I a n D = 0 0X I a n K = 8 X I a n S = 7X I a n Z = X I a n 0. = 0.A = A = A = A = A = A = A 7 = 7A 8 = 8A 0 = 0A Ampere Rating = A = A = A 0 = 0A = A 0 = 0A = A = A 0 = 0A = A = = Two-pole = Three-pole of Poles = Four-pole N = + neutral N = + neutral Single Package SP = Single packaging of single-pole curve B, C and D for select amperes only Blank = Standard packaging a I n = Rated current for instantaneous trip characteristics. 8 Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers

4 Product Selection UL 077 DIN rail supplementary protectors PRODUCT SELECTION FAZ product selection B curve ( X I n current rating) Designed for resistive or slightly inductive loads Response time of instantaneous trip: X I n current rating UL recognized and CSA Certified as supplementary protectors For international and domestic use (conform to IEC 097-) UL file number Specified non-tripping current I NT =. x I N for t > h Specified tripping current I T =. x I N for t < h a. I N : t = 0 s (I N < A) t = 0 s (I N > A) b Type B: x I N : t > 0. s c Type B: x I N : t < 0. s Suitable for applications where protection against low-level shortcircuit faults in control wiring is desired. Instantaneous trip is X continuous rating of device (I n ). Applications include PLC wiring, business equipment, lighting, appliances and some motors. Low magnetic trip point. t [sec] B I / I N B Curve ( X I n Current Rating) designed for resistive or slightly inductive loads a Amperes b Two-pole Three-pole Four-pole + Neutral Three-pole + Neutral FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B7/-SP FAZ-B8/-SP FAZ-B0/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B0/-SP FAZ-B/-SP FAZ-B0/-SP FAZ-B/-SP FAZ-B/-SP FAZ-B0/-SP FAZ-B/-SP FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B7/ FAZ-B8/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B7/ FAZ-B8/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B7/ FAZ-B8/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/ FAZ-B0/ FAZ-B/ FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B7/N FAZ-B8/N FAZ-B0/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B0/N FAZ-B/N FAZ-B0/N FAZ-B/N FAZ-B/N FAZ-B0/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B7/N FAZ-B8/N FAZ-B0/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B/N FAZ-B0/N FAZ-B/N FAZ-B0/N FAZ-B/N FAZ-B/N FAZ-B0/N FAZ-B/N a In North America, these switches are UL recognized and CSA Certified as supplementary protection devices. Per the intent of NEC (National Electrical Code), Article, and CEC (Canadian Electrical Code), Part C., supplementary breakers cannot be used as a substitute for the branch circuit protective device. They can be used to provide overcurrent protection within an appliance or other electrical equipment where branch circuit overcurrent protection is already provided, or is not required. b Option for single packaging on single-pole B, C and D curves only; add suffix SP when ordering. Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers 9

5 UL 077 DIN rail supplementary protectors PRODUCT SELECTION FAZ product selection C curve ( 0X I n current rating) Designed for inductive loads Response time of instantaneous trip: 0X I n current rating UL recognized and CSA Certified as supplementary protectors For international and domestic use (conform to IEC 097-) UL file number Specified non-tripping current I NT =. x I N for t > h Specified tripping current I T =. x I N for t < h a Type C: x I N : t > 0. s b Type C: 0 x I N : t < 0. s Suitable for applications where medium levels of inrush current are expected. Instantaneous trip is 0X rating of device (I n ). Applications include small transformers, lighting, pilot devices, control circuits, and coils. Medium magnetic trip point. t [sec] C I / I N C Curve ( 0X I n current rating) designed for inductive loads a Amperes b Two-pole Three-pole Four-pole + Neutral Three-pole + Neutral FAZ-C0./-SP FAZ-C/-SP FAZ-C./-SP FAZ-C/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C7/-SP FAZ-C8/-SP FAZ-C0/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C0/-SP FAZ-C/-SP FAZ-C0/-SP FAZ-C/-SP FAZ-C/-SP FAZ-C0/-SP FAZ-C/-SP FAZ-C0./ FAZ-C/ FAZ-C./ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C7/ FAZ-C8/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0./ FAZ-C/ FAZ-C./ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C7/ FAZ-C8/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0./ FAZ-C/ FAZ-C./ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C7/ FAZ-C8/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C/ FAZ-C0/ FAZ-C/ FAZ-C0./N FAZ-C/N FAZ-C./N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C7/N FAZ-C8/N FAZ-C0/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C0/N FAZ-C/N FAZ-C0/N FAZ-C/N FAZ-C/N FAZ-C0/N FAZ-C/N FAZ-C0./N FAZ-C/N FAZ-C./N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C7/N FAZ-C8/N FAZ-C0/N FAZ-C/N FAZ-C/N FAZ-C/N FAZ-C0/N FAZ-C/N FAZ-C0/N FAZ-C/N FAZ-C/N FAZ-C0/N FAZ-C/N a In North America, these switches are UL recognized and CSA Certified as supplementary protection devices. Per the intent of NEC (National Electrical Code), Article, and CEC (Canadian Electrical Code), Part C., supplementary breakers cannot be used as a substitute for the branch circuit protective device. They can be used to provide overcurrent protection within an appliance or other electrical equipment where branch circuit overcurrent protection is already provided, or is not required. b Option for single packaging on single-pole B, C and D curves only; add suffix SP when ordering. 0 Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers

6 Technical Data UL 077 DIN rail supplementary protectors TECHNICAL DATA Technical Data Description B Curve C Curve D Curve Electrical Approvals UR (UL 077), CSA (CSA. No. ), CE Standards IEC/EN 097- Short-circuit trip response I n 0 I n 0 0 I n Supplementary Protectors UL/CSA Current range A 0. A 0. A Maximum voltage ratings UL/CSA, single-pole + neutral Two-, three-pole, four-pole and three-pole + neutral Two poles in series Thermal tripping characteristics Multi-pole Short-circuit ratings (at max. voltage) Two-, three-pole Two poles in series Miniature Circuit Breaker IEC 77 Vac 80Y/77 Vac. x I n. x I n 0 ka ( ka for A device) 0 ka ( ka for A device) Vac 80Y/77 Vac. x I n. x I n 0 ka ( ka for A device) 0 ka ( ka for A device) Vac 80Y/77 Vac. x I n. x I n ka ka 0 0 Current range A 0. A 0. A Maximum voltage ratings IEC Two-, three-pole Maximum voltage ratings IEC 097- Two-, three-pole Two poles in series Thermal tripping characteristics Multi-pole Interrupt ratings (at max. voltage) IEC 097- IEC 0898 Operational switching capacity Max. backup fuse [gl/gg] Rated impulse withstand U imp Rated insulation voltage U i Environmental/General Selectivity class Lifespan (operations) Shock (IEC 8--) Operating temperature range Shipment and short-term storage Housing material Mechanical Standard front dimension Device height Terminal protection Mounting width per pole Mounting Degree of protection Terminals top and bottom Supply connection Terminal capacity [mm ] Torque Imperial torque Thickness of busbar material Mounting position 0 Vac 0/0 Vac Vac / Vac 0 Vac 0/0 Vac Vac / Vac 0 Vac 0/0 Vac Vac / Vac > x I n < x I n > x I n < x I n > x I n < x I n ka 0 ka 7. ka A 00 Vac Vac > 0,000 ( operation = ON/OFF) 0g 0 ms to +7 F ( to +7 C) to +8 F ( to +8 C) Nylon 80 mm Finger and back-of-hand proof to IEC 7. mm IEC/EN 07 top-hat rail IP0 Twin-purpose terminals Line or load side x (AWG 8)/ x 0 (AWG 8 8). Nm lb-in (AWG 8 ), lb-in (AWG 0 8), lb-in (AWG ) 0.8 mm As required ka 0 ka 7. ka A 00 Vac Vac > 0,000 ( operation = ON/OFF) 0g 0 ms to +7 F ( to +7 C) to +8 F ( to +8 C) Nylon 80 mm Finger and back-of-hand proof to IEC 7. mm IEC/EN 07 top-hat rail IP0 Twin-purpose terminals Line or load side x (AWG 8)/ x 0 (AWG 8 8). Nm lb-in (AWG 8 ), lb-in (AWG 0 8), lb-in (AWG ) 0.8 mm As required ka (0 ka for 0 and A) 0 ka (0 and A not available) 7. ka A 00 Vac Vac > 0,000 ( operation = ON/OFF) 0g 0 ms to +7 F ( to +7 C) to +8 F ( to +8 C) Nylon 80 mm Finger and back-of-hand proof to IEC 7. mm IEC/EN 07 top-hat rail IP0 Twin-purpose terminals Line or load side x (AWG 8)/ x 0 (AWG 8 8). Nm lb-in (AWG 8 ), lb-in (AWG 0 8), lb-in (AWG ) 0.8 mm As required 8 Eaton corporation UL 89 and UL 077 DIN Rail Miniature Circuit Breakers