ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

Size: px
Start display at page:

Download "ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application."

Transcription

1 1SR F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay status 2 Marker label A C D K E L UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC RMRS Marks a b CE C-Tick Order data Type Rated control supply voltage = measuring voltage Order code 3 x AC 1SR R9300 Order data - Accessories Type Description Order code ADP.01 Adapter for screw mounting 1SR R0100 MAR.01 Marker label 1SR R0100 CO.01 Sealable transparent cover 1SR R0100 Application The is used to monitor three-phase mains for incorrect phase sequence and phase failure. Operating mode Signalling is made by means of the front-face LED. LED Function Output contact closed R: yellow LED ABB 1

2 Function descriptions/diagrams Function diagram legend G Control supply voltage not applied / Output contact open / LED off B Control supply voltage applied / Output contact closed / LED glowing Phase sequence and phase failure monitoring If all phases are present with the correct phase sequence, the output relays energize after the start-up delay t s is complete. If a phase failure or a phase sequence error occurs, the output relays de-energize instantaneously. The LED R glows when the output relays are energized. In case of motors which continue running with only two phases, the detects phase failure if the reverse fed voltage is less than 60 % of the originally applied voltage. L1, L2, L3 Measuring value R: yellow LED t s L1, L2, L3 L1, L3, L2 L1, L2, L3 L1, L2 L1, L2, L3 L1 L1, L2, L3 t s = start-up delay fixed 500 ms L3 L2, L3 2CDC F08 Connection diagram L1 L2 L3 L1 L2 L SC F0118 L1, L2, L3 Control supply voltage = measuring voltage /14 18 Output contacts /24 28 closed-circuit principle 2 ABB

3 Data at T a = 25 C and rated values, unless otherwise indicated Type Supply circuit = measuring circuit L1, L2, L3 Rated control supply voltage U S = measuring voltage 3 x AC Power consumption approx. 15 A Rated control supply voltage U S tolerance % Rated frequency 50/60 Hz Duty time 100 % Measuring circuit L1, L2, L3 Monitoring functions phase failure J phase sequence J Measuring ranges 3 x AC Thresholds U min 0.6 x UN Hysteresis related to the threshold value Measuring voltage frequency 50/60 Hz Response time 500 ms Accuracy within the rated control supply voltage tolerance iu m 0.5 % Accuracy within the temperature range iu m 0.06 % / C Timing circuit Start-up delay t S fixed 500 ms Tripping t - Indication of operational states Relay status R: yellow LED Output relay energized Output circuits 11(15)-12(16)/14(18), 21(25)-22(26)/24(28) Kind of output 2 c/o (SPDT) contacts Operating principle 1) closed-circuit principle Contact material AgNi Rated operational voltage U e (IEC/EN ) 250 Minimum switching voltage / Minimum switching current - / - Maximum switching voltage 250 AC, 250 DC Rated operational current I e AC12 (resistive) A (IEC ) AC15 (inductive) A DC12 (resistive) 24 4 A DC13 (inductive) 24 2 A Mechanical lifetime 30 x 10 6 switching cycles Electrical lifetime (AC12, 230, 4 A) 0.1 x 10 6 switching cycles Max. fuse rating to achieve n/c contact 4 A fast-acting short-circuit protection n/o contact 6 A fast-acting AC rating Utilization category (Control Circuit Rating Code) B 300 (UL 508) max. rated operational voltage 300 AC max. continuous thermal current at B A max. making/breaking apparent power at B /360 A General data Dimensions (W x H x D) 22.5 x 78 x 100 mm (0.89 x 3.07 x 3.94 inch) Mounting DIN rail (IEC/EN 60715) Mounting position any Minimum distance to other units horizontal / vertical M 10 mm if the control supply voltage is higher than 415 Degree of protection enclosure / terminals IP50 / IP Electrical connection Wire size fine-strand with wire end ferrule 2 x mm² (2 x AWG) fine-strand without wire end ferrule 2 x mm² (2 x AWG) rigid 2 x 0.5-4mm² (2 x -12 AWG) Stripping length 7 mm (0.28 inch) Tightening torque mm Environmental data Ambient temperature range operation / storage C / C Environmental testing (IEC ) 24 h cycle time, 55 C, 93 % rel., 96 h Operational reliability (IEC ) 4 g Mechanical resistance (IEC ) 6 g Umax ABB 3

4 Data at T a = 25 C and rated values, unless otherwise indicated Type Isolation data Rated insulation volt. between supply, measuring and output circuits (DE 0110, IEC ) 500 Rated impulse withstand voltage U imp between all isolated circuits (DE 0110, IEC 664) 4 k / µs Test voltage between all isolated circuits (routine test) 2.5 k, 50 Hz, 1 min. Pollution category (DE 0110, IEC 664, IEC 255-5) 3 Overvoltage category (DE 0110, IEC 664, IEC 255-5) III Standards Product standard IEC/EN Low oltage Directive 06/95/EC EMC Directive 04/108/EC Electromagnetic compatibility Interference emission to IEC/EN electrostatic discharge IEC/EN Level 3 (6 k/ 8 k) radiated, radio-frequency, electro- IEC/EN magnetic field Level 3 (10 /m) electrical fast transient (burst) IEC/EN Level 3 (2 k / 5 khz) surge IEC/EN Level 4 (2 k L-L) conducted disturbances, induced IEC/EN by radio-frequency fields Level 3 (10 ) Interference emission IEC/EN ) Closed-circuit principle: Output relay is de-energized if the measured value exceeds/drops below the adjusted threshold. Technical diagrams Load limit curves AC load (resistive) DC load (resistive) CDC F CDC F I A I A Derating factor F Contact lifetime at inductive AC load F CDC F05 Switching cycles 250 resistive load 2CDC F cos ϕ Switching current [A] 4 ABB

5 Dimensions in mm CDC F0003 Dimensions - Accessories in mm CDC F0010 3A CDC F0005 ADP.01 - Adapter for screw mounting MAR.01 - Marker label front-to-back size 107 2CDC F0005 CO.01 - Sealable transparent cover Further documentation Document title Document type Document number Electronic Products and Relays Technical catalogue 2CDC C0x CM-PAS,, CM-PSS, CM-PS Instruction manual 1SC M0000 You can find the documentation online at -> Control Products -> Electronic Relays and Controls -> Three phase monitors. CAD system files You can find the CAD files for CAD systems at -> Low oltage Products & Systems -> Control Products -> Electronic Relays and Controls -> Three Phase Monitors -> CM-PFx - Three Phase Monitors. ABB 5

6 Contact us ABB STOTZ-KONTAKT GmbH P. O. Box Heidelberg, Germany Phone: +49 (0) Fax: +49 (0) You can find the address of your local sales organisation on the ABB home page -> Low oltage Products and Systems Document number. 2CDC D01 (07/12) Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB AG. Copyright 12 ABB All rights reserved

Three-phase monitoring relay CM-PFE

Three-phase monitoring relay CM-PFE Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics

More information

Three-phase monitoring relay CM-PVE

Three-phase monitoring relay CM-PVE Data sheet Three-phase monitoring relay CM-PE The three-phase monitoring relay CM-PE monitors the phase parameter phase failure as well as over- and undervoltage in three-phase mains. 2CDC 251 006 S0012

More information

1SVR R1300 CM-PAS.41

1SVR R1300 CM-PAS.41 2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted

More information

1SVR R2300 CM-PSS.41

1SVR R2300 CM-PSS.41 2CDC 251 044 F0t08 CM-PSS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Fixed threshold values for over- and undervoltage Tripping

More information

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Electronic timer CT-YDE Star-delta change-over with 1 c/o (SPDT) contact

Electronic timer CT-YDE Star-delta change-over with 1 c/o (SPDT) contact Data sheet Electronic timer CT-YDE Star-delta change-over with c/o (SPDT) contact The CT-YDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic

More information

Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact

Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact Data sheet Electronic timer CT-VWE Impulse-ON with 1 c/o (SPDT) contact The CT-VWE is an electronic time relay with Impulse-ON function. It is from the CT-E range. The CT-E range is the economic range

More information

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Voltage monitoring relay CM-ESS.M for single-phase AC/DC voltages

Voltage monitoring relay CM-ESS.M for single-phase AC/DC voltages Data sheet Voltage monitoring relay CM-ESS.M for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Electronic timer CT-AHE OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHE OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHE OFF-delayed with 1 c/o (SPDT) contact The CT-AHE is an electronic time relay with OFF-delay. t is from the CT-E range. The CT-E range is the economic range of ABB s time

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays

Measuring and monitoring relays CM-MSS (4), CM-MSS (5) Thermistor motor protection relays Data sheet Measuring and monitoring relays CM-MSS (4), Thermistor motor protection relays The devices CM-MSS (4) and (5) are used to monitor the overload of motors by the wiring temperature. The motors

More information

Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41

Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 Data sheet Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 The three-phase monitoring relays CM-PSS.x1 monitor the phase parameters phase sequence, phase failure as well as over- and undervoltage.

More information

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,

More information

Three-phase monitoring relays CM-PVS.81

Three-phase monitoring relays CM-PVS.81 Data sheet Three-phase monitoring relays CM-PVS.81 The three-phase monitoring relay CM-PVS.81 monitors the phase parameters phase sequence, phase failure as well as over- and undervoltage. The device is

More information

Electronic timer CT-AWE Impulse-OFF with auxiliary voltage, 1 c/o (SPDT) contact

Electronic timer CT-AWE Impulse-OFF with auxiliary voltage, 1 c/o (SPDT) contact Data sheet Electronic timer CT-AWE mpulse-off with auxiliary voltage, 1 c/o (SPDT) contact The CT-AWE is an electronic time relay with mpulse-off function. t is from the CT-E range. The CT-E range is the

More information

Electronic timer CT-ERD.22 ON-delayed with 2 c/o (SPDT) contacts

Electronic timer CT-ERD.22 ON-delayed with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-ERD.22 ON-delayed with 2 c/o (SPDT) contacts The CT-ERD.22 is an electronic time relay with ON-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

Voltage monitoring relays CM-EFS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-EFS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Electronic timer CT-SAD.22 Star-delta change-over with 2 n/o contacts

Electronic timer CT-SAD.22 Star-delta change-over with 2 n/o contacts Data sheet Electronic timer CT-SAD. Star-delta change-over with n/o contacts The CT-SAD. is an electronic time relay with star-delta change-over. It is from the CT-D range. With their MDRC profile and

More information

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

ABB NEW. Multifunctional three-phase monitoring relays. CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet. Features J. Approvals. Marks.

ABB NEW. Multifunctional three-phase monitoring relays. CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet. Features J. Approvals. Marks. 2CDC 251 054 F0t08 CM-MPN.52 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance Automatic phase sequence

More information

Electronic timer CT-EKE ON-delayed with 1 thyristor

Electronic timer CT-EKE ON-delayed with 1 thyristor Data sheet Electronic timer CT-EKE ON-delayed with 1 thyristor The CT-EKE is an electronic time relay with ON-delay. It is from the CT-E range. The CT-E range is the economic range of ABB s time relays

More information

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories 2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used

More information

Electronic timer CT-AKE OFF-delayed with 1 thyristor

Electronic timer CT-AKE OFF-delayed with 1 thyristor Data sheet Electronic timer CT-AKE OFF-delayed with 1 thyristor The CT-AKE is an electronic time relay with OFF-delay. It is from the CT-E range. The CT-E range is the economic range of ABB s time relays

More information

Electronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts

Electronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts

Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-APS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S

More information

Electronic timer CT-TGD.12

Electronic timer CT-TGD.12 2CDC 251 098 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection

More information

Electronic timer CT-YDAV Star-delta change-over with 2 c/o contacts Data sheet

Electronic timer CT-YDAV Star-delta change-over with 2 c/o contacts Data sheet 1SR 0 0 F000 CT-YDA 1 6 5 7 1 10 selectable time ranges, from 0.05 s to 00 h, for the adjustment of the starting time Potentiometer with direct reading scale for the fine adjustment of the starting time

More information

Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72

Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72 The three-phase monitoring relays CM-MPN.x2 monitor the phase parameters phase sequence, phase failure,

More information

Control module CP-A CM

Control module CP-A CM 2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel a SENSE OUT: +, +, : terminals output b IN 1: 11

More information

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23 Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23 The three-phase monitoring relay CM-MPS.23 monitors the phase parameters phase sequence, phase failure, over- and undervoltage

More information

Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72

Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet Multifunctional three-phase monitoring relays CM-MPN CM-MPN.52, CM-MPN.62 and CM-MPN.72 The three-phase monitoring relays CM-MPN.x2 monitor the phase parameters phase sequence, phase failure,

More information

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,

More information

Analog signal converters CC-E I/I Current / current isolators

Analog signal converters CC-E I/I Current / current isolators ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between

More information

Thermistor motor protection relays CM-MSS.12 and CM-MSS.13

Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 Data sheet Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 The thermistor motor protection relays CM-MSS.12 and CM-MSS.13 monitor the winding temperature of motors and protect them from overheating,

More information

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,

More information

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.21 and CM-MPS.41

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.21 and CM-MPS.41 Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.21 and CM-MPS.41 The three-phase monitoring relays CM-MPS.x1 monitor the phase parameters phase sequence, phase failure, over- and

More information

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.43

Multifunctional three-phase monitoring relays CM-MPS CM-MPS.43 Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.43 The three-phase monitoring relay CM-MPS.43 monitors the phase parameters phase sequence, phase failure, over- and undervoltage

More information

Motor load monitoring relays

Motor load monitoring relays Motor load CM-E Range Motor load Motor load Fields of application The motor load monitor relay monitors the load states of single-phase and three-phase asynchronous motors. The evaluation of the phase

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Coupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC

Coupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC Data sheet Coupling unit CM-IVN For expansion of the insulation monitoring relay CM-IWN.x measuring range up to U n = 690 V AC and 1000 V DC The CM-IVN serves to extend the measuring range of the insulation

More information

Electronic overload relay EF65, EF96 and EF146

Electronic overload relay EF65, EF96 and EF146 Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.

More information

Electronic overload relay EF19 and EF45

Electronic overload relay EF19 and EF45 Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information

Thermistor motor protection relay CM-MSS.31

Thermistor motor protection relay CM-MSS.31 Data sheet Thermistor motor protection relay CM-MSS.31 The thermistor motor protection relay CM-MSS.31 monitors the winding temperature of motors and protects them from overheating, overload and insufficient

More information

Electronic timer CT-MVS.21 Multifunctional with 2 c/o (SPDT) contacts

Electronic timer CT-MVS.21 Multifunctional with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-MVS.21 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.21 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions, 10 time ranges

More information

Electronic timer CT-TGS Pulse generator with 1 c/o contact Data sheet

Electronic timer CT-TGS Pulse generator with 1 c/o contact Data sheet 1SVR 430 163 F0100 CT-TGS 1 5 3 6 7 4 8 1 10 selectable time ranges, from 0.05 s to 300 h, for the adjustment of the ON time Potentiometer with direct reading scale for the fine adjustment of the ON time

More information

Redundancy unit CP-A RU Accessory for CP range power supplies

Redundancy unit CP-A RU Accessory for CP range power supplies Data sheet Redundancy unit Accessory for CP range power supplies ABB s redundancy units are used to establish true redundant redundancy which increases the availability of electrical systems significantly.

More information

Buffer module CP-B 24/3.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range)

Buffer module CP-B 24/3.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range) Data sheet Buffer module CP-B 24/3.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range) The CP-B 24/3.0 serves to ensure a short-term uninterrupted power supply

More information

Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts

Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions and 10 time ranges.

More information

Electronic overload relays EF460 and EF750

Electronic overload relays EF460 and EF750 Data sheet Electronic overload relays EF460 and EF750 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information

Power supply CP-D 12/0.83 Primary switch mode power supply

Power supply CP-D 12/0.83 Primary switch mode power supply Data sheet Power supply CP-D 12/0.83 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution

More information

Buffer module CP-B 24/20.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range)

Buffer module CP-B 24/20.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range) Data sheet Buffer module CP-B 24/20.0, ultra-capacitor based Accessory for power supplies (e.g. switch mode power supplies CP range) The CP-B 24/20.0 serves to ensure a shortterm uninterrupted power supply

More information

Insulation monitoring relay CM-IWN.5 For unearthed AC, DC and mixed AC/DC systems up to U n = 400 V AC and 600 V DC and C e up to 1000 µf

Insulation monitoring relay CM-IWN.5 For unearthed AC, DC and mixed AC/DC systems up to U n = 400 V AC and 600 V DC and C e up to 1000 µf Data sheet Insulation monitoring relay CM-IWN.5 For unearthed AC, DC and mixed AC/DC systems up to U n = 400 V AC and 600 V DC and C e up to 1000 µf The CM-IWN.x serves to monitor insulation resistance

More information

Power supply CP-D 24/2.5 Primary switch mode power supply

Power supply CP-D 24/2.5 Primary switch mode power supply Data sheet Power supply CP-D 24/2.5 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution

More information

Manual motor starter magnetic only MO132

Manual motor starter magnetic only MO132 Data sheet Manual motor starter magnetic only MO132 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF

More information

Power supply CP-C 24/20.0

Power supply CP-C 24/20.0 2CDC 271 066 F0t04 Features Wide input range: 110 240 V AC (85 264 V AC, 100 350 V DC) Output voltage adjustable from 22 28 V DC, default setting 24 V DC ±0.5 % Rated output current 20 A Open circuit,

More information

Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts

Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MXS.22 is a multifunctional electronic timer from the CT-S range. It provides 5 timing functions, 2 times 10 time

More information

Electronic overload relay EF19 and EF45

Electronic overload relay EF19 and EF45 Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays are the alternative to the thermal overload relays. An electronic overload relay offers reliable and fast protection for motors

More information

Power supply CP-E 48/10.0 Primary switch mode power supply

Power supply CP-E 48/10.0 Primary switch mode power supply Data sheet Power supply CP-E 48/10.0 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply

More information

Thermistor motor protection

Thermistor motor protection Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor

More information

Power supply CP-T 24/5.0 Primary switch mode power supply

Power supply CP-T 24/5.0 Primary switch mode power supply Data sheet Power supply CP-T 24/5.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,

More information

Three-phase monitoring relays Product group picture

Three-phase monitoring relays Product group picture Product group picture 2/1 ABB EPR Catalog 2012 2CDC 110 077 C0201 Table of content Three phase monitoring relays Product group picture 2/27 Table of contents 2/28 Benefits and advantages, Applications

More information

Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories

Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories Data sheet Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories Boxed interface relays and optocouplers are used for electrical isolation, amplification and signal

More information

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.

More information

Liquid level monitors & controls

Liquid level monitors & controls Liquid level monitors & controls Measuring & M-E Range Liquid level monitors & controls Measuring & Liquid level monitors and controls Benefits and advantages M-ENE MIN/MAX Monitoring of pump systems for

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Control elements. Fine adjustment. Status indication. 24 V DC typ. 0,25 W / 0,25 VA. 24 V DC typ. 0,03 W / 0,09 VA. 0,15 3 s. 0,5 10 h.

Control elements. Fine adjustment. Status indication. 24 V DC typ. 0,25 W / 0,25 VA. 24 V DC typ. 0,03 W / 0,09 VA. 0,15 3 s. 0,5 10 h. On-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status

More information

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications 2CDC021031S0011 2CDC021033S0011 The miniature circuit breaker S 200 M UC extends the established ABB System pro M compact

More information

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits

More information

02/11/2015

02/11/2015 DIN Rail Mount 35 mm HNM Part number 84870700 Control of one or two levels Filling or emptying function HNM : Control by a resistive level probe HNE : Control by a discrete sensor Part numbers Type Sensing

More information

RM35UB3. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA Minimum switching current

RM35UB3. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA Minimum switching current Characteristics voltage control relay RM35-U - range 114..329 V AC Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Voltage detection threshold Main Range

More information

RM4TR32 three-phase network control relay RM4-T - range V

RM4TR32 three-phase network control relay RM4-T - range V Characteristics three-phase network control relay RM4-T - range 300..430 V Complementary [Us] rated supply voltage Control threshold undervoltage Control threshold overvoltage Width Output contacts Main

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

System pro M compact Switch disconnector SD 200

System pro M compact Switch disconnector SD 200 System pro M compact Switch disconnector SD 200 2CDC051001S0013 2CDC051003S0013 The SD 200 extends the proven System pro M compact series by a new range of switch disconnectors which provides state-of-the-art

More information

Catalog. Modular DIN rail components Installation contactors

Catalog. Modular DIN rail components Installation contactors Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation

More information

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA Monitoring of phase sequence and phase loss Monitoring of asymmetry Temperature monitoring (PTC) Supply voltage 208-480 V AC Supply circuit = measuring circuit 2 change-over contacts Width 45 mm Control

More information

V4IM100AL20 Art.Nr.: V4IM100AL20P Art.Nr.: V DC typ. 0,4 W / 0,45 VA

V4IM100AL20 Art.Nr.: V4IM100AL20P Art.Nr.: V DC typ. 0,4 W / 0,45 VA P AC/DC current monitoring Multifunction Supply voltage 24-240 V AC/DC Built-in current transformer 2 change-over contacts Width 45 mm Control elements -up suppression Maximum threshold Minimum threshold

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

System pro M compact Miniature circuit breaker S 200 S

System pro M compact Miniature circuit breaker S 200 S Data sheet System pro M compact Miniature circuit breaker S 200 S 2CDC021001S0010 2CDC021002S0010 The miniature circuit breaker S 200 S extends the established ABB System pro M compact product range. Thanks

More information

System pro M compact Miniature Circuit Breaker S 200/S 200 M

System pro M compact Miniature Circuit Breaker S 200/S 200 M Data Sheet System pro M compact Miniature Circuit Breaker S 200/S 200 M 2CDC021023S0012 2CDC021038S0012 The miniature circuit breakers of the System pro M compact series S 200 and S 200 M provide state-of-the-art

More information

RM4UB35 single-phase network control relay RM4-U - range V

RM4UB35 single-phase network control relay RM4-U - range V Characteristics single-phase network control relay RM4-U - range 160..220 V Complementary [Us] rated supply voltage Supply voltage limits Control threshold undervoltage Control threshold overvoltage Output

More information

V4IM35AL20 Art.Nr.: V DC typ. 0,45 W / 0,55 VA

V4IM35AL20 Art.Nr.: V DC typ. 0,45 W / 0,55 VA AC/DC current monitoring Multifunction Supply voltage 24-240 V AC/DC Built-in current transformer 2 change-over contacts Width 45 mm Control elements -up suppression Maximum threshold Minimum threshold

More information

RM4TR32 three-phase network control relay RM4-T - range V

RM4TR32 three-phase network control relay RM4-T - range V Characteristics three-phase network control relay RM4-T - range 300..430 V Complementary [Us] rated supply voltage Control threshold undervoltage Control threshold overvoltage Output contacts Main Range

More information

VEO. V2ZS V AC/DC Art.Nr.: V2ZS20P V AC/DC Art.Nr.: TECHNICAL DATA

VEO. V2ZS V AC/DC Art.Nr.: V2ZS20P V AC/DC Art.Nr.: TECHNICAL DATA 4 time ranges 4 transition times Supply voltage 12-240V AC/DC 2 normally open contacts Width 22,5 mm Control elements Fine adjustment star contactor Setting of time range star contactor Transit time Status

More information

RM4UA33F voltage measurement relay RM4-U - range V V AC

RM4UA33F voltage measurement relay RM4-U - range V V AC Characteristics voltage measurement relay RM4-U - range 30..500 V - 110..130 V AC Complementary [Us] rated supply voltage Output contacts Internal input resistance Permissible continuous overload Permissible

More information

RM4TU02 three-phase network control relay RM4-T - range V

RM4TU02 three-phase network control relay RM4-T - range V Characteristics three-phase network control relay RM4-T - range 300..430 V Complementary [Us] rated supply voltage Control threshold undervoltage Output contacts Main Range of product Product or component

More information

RM4JA32M current measurement relay RM4-J - range A V AC

RM4JA32M current measurement relay RM4-J - range A V AC Characteristics current measurement relay RM4-J - range 0.3..15 A - 220..240 V AC Complementary [Us] rated supply voltage Operating voltage tolerance Main Range of product Product or component type Relay

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

Technical catalogue. Modular DIN rail components Installation contactors

Technical catalogue. Modular DIN rail components Installation contactors Technical catalogue Modular DIN rail components Installation contactors Installation Contactors Overview... ESB Installation Contactors 0 A / AC-/AC-7a ESB0...4 4 A / AC-/AC-7a ESB4...5 40 A / AC-/AC-7a

More information

ATS01N212QN soft starter for asynchronous motor - ATS01-12 A V KW

ATS01N212QN soft starter for asynchronous motor - ATS01-12 A V KW Characteristics soft starter for asynchronous motor - ATS01-12 A - 380..415V - 5.5 KW Complementary Assembly style Function available Power supply voltage limits Main Range of product Altistart 01 Product

More information

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters Characteristics voltage control relay RM17-U - range 65..260 V AC Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main Range of

More information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC

More information

Selective Main Circuit-Breakers S 750 DR series acc. to IEC/EN

Selective Main Circuit-Breakers S 750 DR series acc. to IEC/EN Data sheet Selective Main Circuit-Breakers S 750 DR series acc. to IEC/EN 60947-2 Selective main circuit-breakers (SMCB) of the S 750 DR series are circuitbreakers with particular selectivity functions

More information

VEO. V2ZI V AC/DC Art.Nr.: V2ZI10P V AC/DC Art.Nr.: TECHNICAL DATA

VEO. V2ZI V AC/DC Art.Nr.: V2ZI10P V AC/DC Art.Nr.: TECHNICAL DATA 2 functions 10 time ranges Supply voltage 12-240V AC/DC 1 change-over contact Width 22,5mm Control elements Fine adjustment t1 Setting of time range t1 Fine adjustment t2 Setting of time range t2 Status

More information