Spare parts list. CP 1210 CP 1210 S CP 1210 SVR Paving breaker.

Transcription

1 Spare parts list CP 1210 CP 1210 S CP 1210 SVR Paving breaker

2 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN

3 CP 1210 CP 1210 S CP 1210 SVR Spare parts list Introduction Welcome! Protect your investment in the world s finest air tools. Use genuine CP replacement parts. The purchase of replacement parts for your CP tools deserves the same good judgment that resulted in the purchase of the tools themselves. Each genuine CP part is made from carefully selected and inspected material, subjected to sophisticated machinery and finishing processes and heat-treated to produce just the right combination of hardness, ductility and impact resistance for its intended use. Each part is identical to, and made concurrently with, parts used in production tools. The use of parts other than genuine CP replacement parts can lead to substandard performance, early failure, possible damage of other parts and, in some instances, unsafe conditions. Use only authorized parts. Any damage or malfunction caused by unauthorized parts will not be covered by Warranty or Product Liability. Any machine modification not approved by Chicago Pneumatics may result in serious injuries to yourself or others. To reduce the risk of injury, read and understand the relevant safety and operating instructions before operating the machine. Before undertaking any maintenance or changing the working tool on pneumatic machines, always switch off the air supply and bleed the machine by depressing the start and stop device. Then disconnect the air hose from the machine. CP 1210 is designed for medium to heavy demolition of materials such as concrete, asphalt and brickwork. It is designed for vertical use. No other use is permitted. 3

4 Spare parts list CP 1210 CP 1210 S CP 1210 SVR CP 1210 SVR CP 1210 CP 1210 S

5 CP 1210 CP 1210 S CP 1210 SVR Spare parts list No. Description Shank size Quantity Ordering No S 1210 SVR 1 Socket head cap screw (M8) Washer - top cover Top cover Buffer pad assembly Spring - handle Backhead (vibration reduced) Pin - lever R Lever - throttle Handle Grip Socket head cap screw (M12 x 1.75) Roll pin (16 DIA x 65 L) Self tapping screw P Data plate *) 15 Gasket O-ring C Upper valve lid R Valve R Valve case R Lower valve case lid O-ring H Seal - cylinder R (23 25) Throttle valve complete Throttle valve *) 24 Seal - throttle valve R Ring - valve seal retaining R Spring - throttle valve R O-ring R Nut - air inlet swivel Lock washer - swivel O-ring - swivel Swivel - air inlet *) Not delivered separately

6 Spare parts list CP 1210 CP 1210 S CP 1210 SVR CP 1210 SVR CP 1210 CP 1210 S

7 CP 1210 CP 1210 S CP 1210 SVR Spare parts list No. Description Shank size Quantity Ordering No S 1210 SVR 32 Nut (M12) Cylinder Piston R Bolt - fronthead R Bushing - anvil block 1 (25 mm) US, 1 (25 mm) ISO R Bushing - anvil block 1⅛ (28 mm), 1¼ (32 mm) Block - anvil 1 (25 mm) US, 1 (25 mm) ISO R Block - anvil 1⅛ (28 mm), 1¼ (32 mm) Fronthead for CP 1210, CP 1210 S, CP 1210 SVR 1 (25 mm) US F Fronthead for CP 1210, CP 1210 S, CP 1210 SVR 1 (25 mm) ISO F Fronthead for CP 1210 S, CP 1210 SVR 1¼ (32 mm) Fronthead for CP 1210 S, CP 1210 SVR 1⅛ (28 mm) Spring - steel 1 (25 mm) US, 1 (25 mm) ISO R Spring - polyurethane 1⅛ (28 mm), 1¼ (32 mm) Lock - fronthead nut R Nut - fronthead bolt R Roll pin (16 DIA x 55 L) Roll pin (10 DIA x 55 L) Spring - plunger R Plunger - latch R Retainer latch bush R Retainer - latch R (48 55) Silencer complete Silencer *) 49 Socket head cap screw (M6 x 1-45L) Washer F O-ring - silencer (Bottom) Nyloc nut (M6 x 1) Sealing pad - silencer (Left) O-ring - silencer (Top) Sealing pad - silencer (Right) Rubber grip F Lever F Backhead Roll pin R Throttle valve F Data plate *) *) Not delivered separately 7

8 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN