C E R T I F I C A T E O F C O M P L I A N C E

Size: px

Start display at page:

Download "C E R T I F I C A T E O F C O M P L I A N C E"

Roger Wilkinson
7 years ago
Views:

1 C E R T I F I C A T E O F C O M P L I A N C E Certificate Number E90700 Report Reference E Issue Date 2016-MAY-24 Issued to: FAIRCHILD SEMICONDUCTOR CORP 3030 Orchard Pkwy San Jose, CA USA This is to certify that representative samples of Optical Isolators - Component See Addendum Page for Models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL Optical Isolators CSA Component Acceptance Service Notice No. 5A - Component Acceptance Service for Optocouplers and Related Devices See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at Page 1 of 2

2 C E R T I F I C A T E O F C O M P L I A N C E Certificate Number E90700 Report Reference E Issue Date 2016-MAY-24 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Double protection optical isolators having an isolation voltage of 5300 Vrms: Model FOD817 Double protection optical isolators having an isolation voltage of 3750 V ac: Models MOCD211*Z, MOCD205*Z, MOCD206*Z, MOCD207*Z, MOCD213*Z, MOCD208*Z, MOCD217*Z. Where * may be additional numbers and/or letters Double protection optical isolators having an isolation voltage of 5300 V ac: Models FOD8163, FOD8173, FOD8111, FOD8480, FOD8163T, FOD8173T, FOD8111T, FOD8480T, FOD8314, FOD8341, FOD834, FOD8314T, FOD8341T, FOD8342T, FODM10XX where X can be a number 0 through 9. Models may be followed by alphanumeric characters Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at Page 2 of 2

3 Certificate Number: Date: Models: FOD The maximum operating (ambient) temperature, as noted in the ratings table, shall not be exceeded. Ratings: MAXIMUM RATINGS PER CHANNEL (at 25 C ambient): For ambient temperatures higher than 25 C and up to Tmoa, refer to manufacturer s specifications and/or thermal derating curve data for complete electrical ratings. Model Current (ma) Power (mw) Isolation Emitter Sensor Emitter Sensor Voltage (Vac) Operating (Ambient) Junction Storage FOD

4 Certificate Number: Date: Models: MOCD211*Z, MOCD205*Z, MOCD206*Z, MOCD207*Z, MOCD213*Z, MOCD208*Z, MOCD217*Z. Where * may be additional numbers and/or letters. 3. If the maximum operating ambient temperature is exceeded, as noted in the ratings table, additional means should be used to determine if the maximum junction temperature of the device is exceeded. It may be helpful to review the electrical specifications for derating information. 6. Model MOCD213*Z was subject to the Dielectric Voltage Withstand Test after conditioning at 55C. Ratings: MAXIMUM RATINGS (at nominal operating temperature): Current (ma) Power (mw) Isolation Model Voltage Operating Junction Storage Emitter Sensor Emitter Sensor (AC) MOCD211*Z MOCD208*Z MOCD205*Z MOCD206*Z MOCD207*Z MOCD213*Z MOCD217*Z

5 Certificate Number: Date: Models: FOD8163, FOD8173, FOD8111, FOD8480, FOD8163T, FOD8173T, FOD8111T, FOD8480T, FOD8314, FOD8341, FOD834, FOD8314T, FOD8341T, FOD8342T. Models may be followed by alphanumeric characters 3. If the maximum operating ambient temperature is exceeded, as noted in the ratings table, additional means should be used to determine if the maximum junction temperature of the device is exceeded. It may be helpful to review the electrical specifications for derating information.

6 Ratings: MAXIMUM RATINGS (at nominal operating temperature): Current (ma) Power (mw) Isolation Model Emitter Sensor Emitter Sensor Voltage FOD8314, FOD8341, FOD834 FOD8314T, FOD8341T, FOD8342T FOD8163T, FOD8173T, FOD8111T, FOD8480T FOD8163, FOD8173, FOD8111, FOD8480 Operating (Ambient) Junction Storage

7 Certificate Number: Date: Models: FODM10XX. Where X can be any number between 0-9 and may be followed by alphanumeric characters 3. If the maximum operating ambient temperature is exceeded, as noted in the ratings table, additional means can be used to determine if the maximum junction temperature of the device is exceeded. Ratings: MAXIMUM PER CHANNEL RATINGS (at 25 C ambient): For ambient temperatures higher than 25 C and up to Tmoa, refer to manufacturer s specifications and/or thermal derating curve data for complete electrical ratings. Current (ma) Power (mw) Isolation Operating Model Emitter Sensor Emitter Sensor Voltage, (Ambient) Junction Storage Vrms FODM10XX

UL TEST REPORT AND PROCEDURE

Issue Date: 2011-12-17 Page 1 of 19 Report Reference # E146893-V1-S24 Revised: 2013-03-21 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES 60601-1:2005 (Medical electrical equipment Part 1: General