INDUSTRIAL FITTINGS - clips, clamps, ferrules MINI CLIP

Transcription

1 Banding strap assembly system band width range [inch] description BG /4-3/4 Banding strap assembly tool size [inch] width length [m] description BG /4 6,3 30,5 BG /8 9,5 30,5 BG /2 12,7 30,5 BG /8 15,9 30,5 BG / ,5 Stainless steel strap. size [inch] quantity [pcs] description BG /4 100 BG /8 100 BG /2 100 BG /8 100 BG /4 100 Buckles for stainless steel strap. MINI CLIP Rolled-up edges of a MINI hose clip prevent damage of the hose. A hexagonal, slotted screw head allows screwing with the use of a flexible hose clamp driver. MINI CLIP W1 - electro zinc-plated carbon steel. MINI CLIP W4 - made entirely of AISI 304. W1 min. / max. diameter tightening torque* [Nm] max. press. medium* [bar] AB ,4 15 AB ,4 14 AB AB , AB AB ,5 AB ,5 AB AB AB ,5 AB ,5 AB ,5 AB ,5 AB ,5 AB AB ,5 AB ,5 AB W4 (AISI 304) size min. / max. diameter tightening torque [Nm] AB ,5 8,5 1,5 AB ,5 9,5 1,5 AB ,5 11 1,5 AB ,5 12 1,5 AB ,5 13 1,5 AB ,5 14 1,5 AB ,5 15 1,5 AB ,5 16 1,5 AB ,5 AB ,5 * - depending on hose type and connection part 642

2 EAR CLIP EAR CLIP hose clips are simple to use and inexpensive. They are easy and fast to mount with special ear clamp pliers that are also used to disassemble the clips. EAR CLIP with 1 ear W1 W4 (AISI 304) I.D. diameter range band thickness band width AB AB , ,8 6 AB AB , ,8 6 AB AB , ,8 6,5 AB AB , ,8 6,5 AB AB , ,9 (W4-0,8) 6,5 AB AB , AB , AB AB , ,1 (W4-1) 7 AB AB , ,2 (W4-1) 7 - AB , ,5 - AB , ,5 EAR CLIP with 2 ears W1 W4 (AISI 304) I.D. diameter range band thickness band width AB AB , ,6 6 AB AB , ,8 6 AB AB , ,8 6,5 AB , ,9 6,5 AB AB , ,9 (W4-0,8) 6,5 AB AB , ,0 7 AB AB , ,2 (W4-1) 7 AB AB , ,2 (W4-1) 7,5 AB AB , ,2 (W4-1) 7,5 AB AB , ,2 (W4-1) 8 AB AB , ,3 (W4-1) 8 AB AB , ,4 (W4-1,2) 8,5 AB , ,4 8,5 AB , ,4 9 AB , ,4 9 AB , ,4 9,5 AB , ,6 9,5 AB , ,6 10 AB , ,6 10 AB , ,6 10,5 EAR CLIP standard pliers Flexible hose clamp driver for band clamps AB AB-9999V 643

3 EAR CLIP - W EAR CLIP hose clips are simple to use and inexpensive. They are easy and fast to mount with special ear clamp pliers that are also used to disassemble the clips. The inner liner protects the hose against any damage. EAR CLIP with 1 ear (with inner liner) W1 W4 (AISI 304) I.D. diameter range band thickness band width AB AB ,5 7,5 8,5 0,8 6 AB AB ,5 8 9,5 0,8 6 AB AB ,5 9 10,5 0,8 6,5 AB AB , ,5 0,8 6,5 AB AB ,5 10,5 12,5 0,9 (W4-0,8) 6,5 AB AB ,3 11,5 13, AB ,5 12,5 14,5 1 7 AB AB , ,3 1,1 (W4-1) 7 - AB , ,3 1 7 AB AB , ,3 1,2 (W4-1) 7 - AB , ,3 1 7,5 - AB , ,3 1 7,5 WIRE CLIP A wire spring clip is designed for quick mounting of low-pressure hoses. Made of zinc-plated spring steel. min. diameter max. diameter AB ,3 7,8 1 AB ,8 8,3 1 AB ,3 8,8 1 AB ,8 9,3 1 AB ,3 9,9 1 AB ,8 10,4 1,2 AB ,4 11 1,2 AB ,6 1,2 AB ,6 12,3 1,5 AB ,1 13,1 1,5 AB ,9 13,6 1,5 AB ,6 14,4 1,5 AB ,4 15,1 1,8 AB ,8 15,9 1,8 AB ,9 16,8 1,8 AB ,8 17,7 1,8 AB ,7 18,7 2 AB ,7 19,6 2 AB ,6 20,6 2 wire 644

4 ASFA-L 9 mm A general purpose, worm drive hose clamp designed for easy and quick mounting of low-pressure hoses. Manufactured according to the requirements of DIN 3017 standard. W5 version, made entirely of AISI 316 steel, is recommended for food, chemical and marine industry application, etc. W1 W5 (AISI 316) min / max diameter range band thickness tightening torque* [Nm] max. medium pressure* [bar] AB AB , AB AB , AB AB ,7 3,5 42 AB AB ,7 3,5 36 AB AB , AB AB , AB AB , AB AB , AB AB , AB AB , AB AB , AB AB , AB AB , AB AB ,7 4 9 AB AB ,7 4 8 AB AB ,7 4 7 AB AB ,7 4 6 AB AB ,7 4 5 ASFA-S 12 mm A general purpose hose clamps designed for quick and easy clamping of low-pressure hoses. Manufactured in accordance with DIN 3017 standard. W5 version, made entirely of AISI 316 steel, is recommended for food, chemical, marine industry, etc. W1 W5 (AISI 316) * - depending on hose type and connection shape. min / max diameter range band thickness tightening torque* [Nm] max. medium pressure* [bar] AB AB ,8 4,2 45 AB AB ,8 5,2 45 AB AB ,8 5,2 40 AB AB ,8 5,2 35 AB AB , AB AB , AB AB ,8 6,8 25 AB AB ,8 6,8 20 AB AB ,8 6,8 17 AB AB ,8 6,8 14 AB AB ,8 6,8 12 AB AB ,8 6,8 10 AB AB ,8 6,8 8 AB AB ,8 6,8 7 AB AB ,8 6,8 6 AB AB ,8 6,8 5 AB AB ,8 6,8 4 AB AB ,8 6,8 3 AB AB ,8 6,8 2 AB AB ,8 6,8 2 AB AB ,8 6,8 1,8 AB AB ,8 6,8 1,8 AB AB ,8 6,8 1,6 AB AB ,8 6,8 1,6 645

5 D TORRO SPIRO A worm drive hose clamp with 9 and 12 band width. S version is made of carbon steel covered with aluminium and zinc alloy, W4 version is made of AISI 304 steel. A right hand hose clamp designed to mount spiral ventilation hoses of P1, P2, P3 and P7 type whereas a left hand for hoses of Clip type (see DUCTING AND VENTILATION HOSES section). Its unique design (bridge) ensures tight connection and does not damage the hose. D = 4 mm D = 7.5 mm - for wire diameter of mm - for wire diameter of mm S version W4 version min / max diam. range VA-TSP VA-TSP-06094/W VA-TSP VA-TSP-07094/W VA-TSP VA-TSP-08094/W VA-TSP VA-TSP-09094/W VA-TSP VA-TSP-10094/W VA-TSP VA-TSP-11094/W VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP VA-TSP band width bridge width D ,5 S version Two-part TORRO SPIRO hose clamps designed for big bore hoses W4 version min / max diam. range VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W VA-TSP VA-TSP /W band width bridge width D 12 7,5 The tables above show the s of right hand hose clamps. Code example of a left hand hose clamp: VA-TSL A diameter range, band and bridge width are the same as those of right hand versions. 646

6 FLEX-GEAR 847 series Band clamps with spring lock system maintaining constant clamping force. Excellent choice for fluctuating and extreme temperature applications. The rolled-up edges of the band protect the external layer of the hose from damage and ensure even clamping force around the hose. Tightening torque: 5.6 Nm (max. 9.6 Nm). The clamp is made of stainless steel. Band width: 9/16. minimum diameter maximum diameter SAE size AB AB AB AB AB AB AB AB AB AB AB FLEX-GEAR HD 845 series Band clamps with spring lock system maintaining constant clamping force. Excellent choice for fluctuating and extreme temperature applications. The rolled-up edges of the band protect the external layer of the hose from damage and ensure even clamping force around the hose. Tightening torque: 8.5 Nm (max Nm). The clamp is made of stainless steel. Band width: 5/8. minimum diameter maximum diameter SAE size AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB

7 SUPRA HEAVY DUTY W2 A robust clamp with rolled-up band edges recommended for reinforced, thick-wall industrial hoses. The hexagonal head design of a screw allows tightening with such common tools as flat, tubular or adjustable spanner. Band and bridge made of AISI 430 steel, bolt and rollers of zincplated steel. min / max diameter range AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB band width bolt size max. tightening torque* [Nm] max. medium pressure* [bar] 18 M M7 25 M M * - depending on hose type and connection shape 648

8 HDC W1, W5 A robust clamp with rolled-up band edges recommended for reinforced, thick-wall industrial hoses. The hexagonal head of a bolt allows tightening with such common tools as flat, tubular and adjustable spanner. W1 - all parts made of zinc-plated steel. W5 - all parts made of AISI 316 steel. W1 W5 min / max diameter range AB-HDC-017/019-W1 AB-HDC-017/019-W AB-HDC-020/022-W1 AB-HDC-020/022-W AB-HDC-023/025-W1 AB-HDC-023/025-W AB-HDC-026/028-W1 AB-HDC-026/028-W AB-HDC-029/031-W1 AB-HDC-029/031-W AB-HDC-032/035-W1 AB-HDC-032/035-W AB-HDC-036/039-W1 AB-HDC-036/039-W AB-HDC-040/043-W1 AB-HDC-040/043-W AB-HDC-044/047-W1 AB-HDC-044/047-W AB-HDC-048/051-W1 AB-HDC-048/051-W AB-HDC-052/055-W1 AB-HDC-052/055-W AB-HDC-056/059-W1 AB-HDC-056/059-W AB-HDC-060/063-W1 AB-HDC-060/063-W thickness x band width W1 W5 bolt 0,6 18 0,6 18 M5 40 0,8 20 0,6 20 M6 50 1,2 22 0,8 22 AB-HDC-064/067-W1 AB-HDC-064/067-W ,5x22 AB-HDC-068/073-W1 AB-HDC-068/073-W AB-HDC-074/079-W1 AB-HDC-074/079-W AB-HDC-080/085-W1 AB-HDC-080/085-W AB-HDC-086/091-W1 AB-HDC-086/091-W AB-HDC-092/097-W1 AB-HDC-092/097-W ,5 24 0,8 24 AB-HDC-098/103-W1 AB-HDC-098/103-W AB-HDC-104/112-W1 AB-HDC-104/112-W AB-HDC-113/121-W1 AB-HDC-113/121-W AB-HDC-122/130-W1 AB-HDC-122/130-W AB-HDC-131/139-W1 AB-HDC-131/139-W AB-HDC-140/148-W1 AB-HDC-140/148-W AB-HDC-149/161-W1 AB-HDC-149/161-W AB-HDC-162/174-W1 AB-HDC-162/174-W AB-HDC-175/187-W1 AB-HDC-175/187-W AB-HDC-188/200-W1 AB-HDC-188/200-W AB-HDC-201/213-W1 AB-HDC-201/213-W AB-HDC-214/226-W1 AB-HDC-214/226-W , AB-HDC-227/239-W1 AB-HDC-227/239-W AB-HDC-240/252-W1 AB-HDC-240/252-W AB-HDC-253/265-W1 AB-HDC-253/265-W AB-HDC-266/278-W1 AB-HDC-266/278-W AB-HDC-279/291-W1 AB-HDC-279/291-W AB-HDC-294/304-W1 AB-HDC-294/304-W M6 55 M8 70 M8 80 M10 90 M

9 DPC W1, W5 A clamp with robust, double band. Two bolt guarantee accurate and tight connection of a hose with its fitting. W1 - all parts made of zinc-plated steel. W5 - all parts made of AISI 316 steel. W1 W5 min / max diameter range AB-DPC-035/045-W1 AB-DPC-035/045-W AB-DPC-040/050-W1 AB-DPC-040/050-W AB-DPC-045/055-W1 AB-DPC-045/055-W AB-DPC-050/060-W1 AB-DPC-050/060-W AB-DPC-055/065-W1 AB-DPC-055/065-W AB-DPC-060/070-W1 AB-DPC-060/070-W AB-DPC-065/075-W1 AB-DPC-065/075-W AB-DPC-070/080-W1 AB-DPC-070/080-W AB-DPC-075/085-W1 AB-DPC-075/085-W AB-DPC-080/090-W1 AB-DPC-080/090-W AB-DPC-085/095-W1 AB-DPC-085/095-W AB-DPC-090/100-W1 AB-DPC-090/100-W AB-DPC-095/105-W1 AB-DPC-095/105-W AB-DPC-100/110-W1 AB-DPC-100/110-W AB-DPC-105/115-W1 AB-DPC-105/115-W AB-DPC-110/120-W1 AB-DPC-110/120-W AB-DPC-115/125-W1 AB-DPC-115/125-W AB-DPC-120/130-W1 AB-DPC-120/130-W AB-DPC-125/135-W1 AB-DPC-125/135-W AB-DPC-130/140-W1 AB-DPC-130/140-W AB-DPC-135/145-W1 AB-DPC-135/145-W AB-DPC-140/150-W1 AB-DPC-140/150-W AB-DPC-145/155-W1 AB-DPC-145/155-W AB-DPC-150/160-W1 AB-DPC-150/160-W AB-DPC-155/165-W1 AB-DPC-155/165-W AB-DPC-160/170-W1 AB-DPC-160/170-W AB-DPC-165/175-W1 AB-DPC-165/175-W AB-DPC-170/180-W1 AB-DPC-170/180-W AB-DPC-190/200-W1 AB-DPC-190/200-W AB-DPC-200/210-W1 AB-DPC-200/210-W AB-DPC-210/220-W1 AB-DPC-210/220-W AB-DPC-220/230-W1 AB-DPC-220/230-W AB-DPC-230/240-W1 AB-DPC-230/240-W AB-DPC-240/250-W1 AB-DPC-240/250-W AB-DPC-250/260-W1 AB-DPC-250/260-W AB-DPC-260/270-W1 AB-DPC-260/270-W AB-DPC-270/280-W1 AB-DPC-270/280-W AB-DPC-290/300-W1 AB-DPC-290/300-W thickness x band width 1x20 bolt W1 - M6 45 W5 - M6 50 1x24 M

10 Malleable iron clamps picture hose I.D. clamp I.D. working pressure [bar] description MU MU Two-part hose clamp. Material: zinc-plated malleable iron. MU MU MU MU MU MU MU MU MU MU MU MU MU MU MU MU MU Two-part hose clamp according to DIN A. Material: zinc-plated malleable iron. Two-part hose clamp with safety claws and separate tongues according to DIN B. Material: zinc-plated malleable iron. MU MU Three-part hose clamp with safety claws and separate tongues according to DIN 20039B. Material: zinc-plated malleable iron. MU

11 Safety clamps according to DIN 2817, DIN 2826 Material: Working press.: (AISI 316), (brass-casting), * (brass-forging), Al (aluminium-casting), Al* (aluminiumforging) 25 bar (DIN 2817), up to 100 bar (DIN 2826) Safety clamp designed to assemble a hose on a fitting with a safety collar. DN - hose inside diameter x hose wall thickness. RS , RS (DIN 2817) clamps designed for standard fittings (smooth). RS (DIN 2826) clamps designed for high pressure and steam fittings (with serrated tail). RS DN D min-max material dimensions H B L bolts weight [kg] RS * ,27 13 x RS Al* 0,11 RS * 0,37 M6x20 RS ,32 13 x RS * 0,34 RS x * 0,31 RS ,31 RS * ,31 19 x M6x20 RS Al* 0,13 RS * ,54 RS ,50 19 x M8x25 RS * 0,56 RS ,33 RS x * ,33 M6x20 RS Al* 0,14 RS x 6, * ,55 RS ,63 25 x 7, M8x25 RS * 0,68 RS ,38 25 x RS Al* M6x20 0,14 RS x 8, * M8x25 0,65 RS ,35 RS * ,41 32 x M6x20 RS Al* 0,15 RS * M8x25 0,87 RS , RS Al* M6x20 0,15 32 x RS , RS * M8x25 0,78 RS , RS x Al M6x20 0,17 RS M8x25 0,83 RS x Al* M6x20 0,15 RS RS x 6, * ,43 RS Al* 50 0,16 M6x20 RS , RS Al* 0,18 38 x RS , RS * M10x40 1,40 RS , RS Al* M6x20 0,18 38 x RS * ,55 M10x40 RS ,50 40 x RS Al* 0,18 50 RS M6x20 0,52 40 x RS Al* 0,19 RS x Al* M8x25 0,30 0,25 0,38 652

12 Safety clamps according to DIN 2817, DIN 2826 DN D min-max material dimensions H B L bolts weight [kg] RS ,65 RS x MS* M8x25 0,71 RS Al* 0,27 RS ,65 50 x RS * M10x40 1,70 RS * 0, RS x Al* M8x25 0,31 RS * , RS x M10x40 2,40 RS RS x * ,20 RS Al* 75 0,40 M8x25 RS * 1, RS x Al* 0,45 RS , M10x40 RS x ,40 RS RS x * ,25 RS Al* 77 0,49 M8x25 RS , RS x Al* 0,53 RS ,30 M10x40 RS ,85 77 RS x Al* M8x25 0,52 RS , RS x M10x40 3,90 RS ,40 80 x RS Al* 0,47 77 RS M8x25 0,80 80 x RS Al* ,51 RS RS x * ,40 RS Al* 1,19 RS , x RS Al* ,15 RS , x M10x40 RS Al* ,40 RS , x RS Al* ,35 RS , x RS Al* 1,40 6 x RS ,20 M12x x x RS Al* ,40 M10x50 RS , x RS Al 6 x 2,65 RS M12x50 8, x RS Al 2,85 RS x Al* ,75 RS x Al* x M12x50 3,30 RS x Al* ,70 RS x Al* x 6, RS x Al* M12x60 6,75 1,05 1,15 3,00 653

13 Crimping ferrules for industrial hoses - L type L type ferrules are used to assemble hydraulic type fittings (the same type as Z type high-pressure fittings) on industrial hoses (both rubber and plastic with textile reinforcement or reinforcing spiral suction-delivery hoses). In order to select an appropriate ferrule, hose outside and inside diameter must be taken into account. The length of the ferrule L must not exceed the length of the fitting s hose tail. Ferrules made of AISI 316 available on request. hydraulic type fitting ferrule - L type rubber or plastic hose (AISI 304) hose I.D. [inch] TI-L TI-L / ,6 TI-L TI-L TI-L TI-L / ,2 30 TI-L TI-L TI-L TI-L TI-L TI-L TI-L TI-L / ,8 32 TI-L TI-L TI-L TI-L ,4 24 TI-L TI-L ,5 TI-L TI-L , / ,6 TI-L TI-L ,5 TI-L TI-L TI-L TI-L TI-L TI-L / ,4 36,5 TI-L TI-L TI-L TI-L / TI-L TI-L ,8 40 TI-L TI-L TI-L TI-L TI-L TI-L ,5 TI-L TI-L TI-L TI-L / ,2 TI-L TI-L TI-L TI-L TI-L TI-L TI-L TI-L / ,8 64 TI-L TI-L TI-L TI-L TI-L TI-L TI-L TI-L ,1 69,8 TI-L TI-L / , TI-L TI-L , D1 D2 D3 L Example: Hose for water IV-PATOS-13 with inside diameter Dw = 13 mm, outside diameter Dz = 23 mm, fittings TI-ZBW , crimping ferrule TI-L Crimped in accordance with IT-14. Attention! To crimp rubber and plastic hoses with textile reinforcement, properly selected ferrules for high-pressure thermoplastic hoses can also be used (ZC-..., MC-...). 654

14 Crimping ferrules for industrial hoses - LDR, LD, LR types LDR, LD, LR type ferrules designed to crimp stainless steel hygienic fittings (with serrated hose tail) of NH-..K-... type and hose fittings with tails for safety clamps - RS, e.g. TW-KRS-..., NH-..R-... on industrial hoses (rubber and plastic with textile reinforcement, optionally with steel wire reinforcement - suction-delivery hoses). Inside Dw and outside Dz hose diameter must be taken into account when selecting the ferrule. The length of the ferrule L can be slightly (several mm) longer than the length of the fitting s hose tail Lk. LR ferrules - only for fittings for safety clamps, LD - only for NH-..., K-... type fittings. Ferrules made of AISI 316 steel available on request. fitting for safety clamp assembly NH-... K-... type fitting LDR, LR, LD type ferrule rubber or plastic hose (AISI 304) hose I.D. [inch] - TI-LD / , TI-LD / TI-LD ,5 37 TI-LR TI-LR TI-LD TI-LD ,5 TI-LDR TI-LDR /4 32 TI-LDR TI-LDR TI-LDR TI-LDR / , ,2 47 TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR / TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LDR TI-LD ,5 TI-LR TI-LR TI-LD , TI-LR TI-LR D1 D2 D3 L Example: A hose for foodstuffs BLUE FOOD FLEXWING (Dw = 63 mm, Dz = 78 mm), fitting NH-DWK-065 with nut NH-DN-065, crimped with ferrule TI-LDR

15 Internal crimping system Internal crimping allows permanent and safe fitting-hose connection ensuring full and unrestricted flow through the fitting of a flexible hose assembly. The fitting is internally expanded by pulling a hardened tool of the same size as the hose bore, called a dolly or a plug, down the inside of a hose tail. The compressive force exerted on the hose wall by the hose tail causes the hose material to flow into the serrated cavities of both hose tail and ferrule. As a result, a permanently attached, secure mechanical bond is achieved. The whole process is the opposite to the traditional external crimping. The main advantage of internal crimping over external crimping is the increase in a flow rate, because: - when externally crimped, the hose tail of a fitting (inserted into the hose) limits the flow diameter by the thickness of its wall; - when internally crimped, the wall of the hose tail is entirely pushed into the hose, the inside diameters of both the hose and its fitting are the same Dw = Dk). Example for DN76 (3 ) hose, when flow rate amounts to w = 4 m/s. x Dk area S [cm 2 ] flow rate Q [l/min] external crimping 70,5 39,0 936 internal crimping 76,0 45, gain (external / internal) + 7,8% + 16% + 16% The bigger the flow rate, the shorter the reloading time - that makes the internal crimping method cost-effective. Another advantage is the lack of obstacles and no turbulence at the end of a hose tail which is crucial for the transfer of dry and loose or semi-fluid products (granules, grain, cement, concrete, etc.). The method can be used for the majority of rubber industrial hoses from 2 (DN50) to 12 (DN300). It is particularly recommended for water and air hoses, fuels and other petrochemical products, delivery hoses for dry media, and for foodstuffs. Fitting and ferrule selection Internal crimping requires special fittings and ferrules (TM type). The ferrule is selected according to hose Dw and its Dz (see picture below). Assemble in accordance with IT-86 manual. The maximum working pressure for internally crimped fittings is 30 bar for 2 to 6 fittings, 20 bar for 8 and bigger fittings. Maximum working pressure of the complete flexible hose assembly is limited by the working pressure of hose connections (e.g. PN 16 flange) and by working pressure of the hose. TM-... fitting TM-... type ferrule rubber industrial hose 656

16 HOOKIE HOOK Special hooks allow to lift reloading hoses. Widely used in marine reloading systems to facilitate handling of hoses between oil rigs and supply vessels, in shipyards, etc. As a standard used with floating hoses. Made of forged carbon steel and mounted with clamps on a special type of fittings with swivel option. hose DN [inch] working load [T] weight [kg] TM- HH TM- HH ,8 TM- HH description Complete Hookie Hook hose lifter with retaining clamp. Total width 460 mm. RUBBER P-CLIP RUBBER P-CLIP clamp designed for secure and vibration-damping suspension of pipes, cables, hoses, etc. It consists of a bent steel clip and a rubber flange profile. The rubber profile dampens mechanical impact and vibrations as well as protects cables and hoses against damage. The clip is made of galvanized carbon steel, the profile of EPDM rubber resistant to water, abrasion, temperature changes and ageing. W1 diameter band width bore size W4 (AISI 304) diameter band width bore size AB ,3 AB ,3 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,4 AB ,3 AB ,3 AB ,3 AB ,4 AB ,4 AB ,4 AB ,4 AB ,4 AB ,4 AB ,4 658