Inserts Face milling cutters Square shoulder cutters Slot cutters Porcupine cutters Specific applications and Sets Profile milling
|
|
- Scot Perry
- 7 years ago
- Views:
Transcription
1 Soli carbie Profile milling Specific applications an Sets Porcupine Slot Square shouler Face milling Inserts
2 Boring heas rills Soli carbie Arbors an aaptors Soli carbie Contents inex H.0 En mills H.0 Torus en mills H.11 Contour en mills H.1 Ball nose en mills H.1 rills H.0 Others H. Tungsten carbie burrs H. Technical information H. CANEA H.01
3 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Contents inex En mills Inserts Flutes Flutes (ong) Flutes Flutes (ong) Flutes Flutes Face milling Square shouler Slot Page H.0 Page H.0 Page H.0 Page H.0 Page H.0 Page H Flutes (ong) Flutes Flutes Flutes (ong) / Flutes / Flutes 00 Flutes Page H.0 Page H.0 Page H.0 Page H.0 Page H.0 Page H.0 Porcupine Specific applications an Sets Profile milling Page H. Torus en mills Flutes Flutes (ong) Flutes Page H.11 Page H.11 Page H.1 Contour en mills Flutes Flutes with front cut Flutes (ong) Page H.1 Soli carbie Page H.1 Page H.1 Ball nose en mills 0 0 Flutes Flutes (ong) Flutes Flutes (ong) 0 Flutes Flutes Page H.1 Page H.1 Page H.1 Page H.1 Page H.1 Page H Flutes Flutes Flutes 1 1 Flutes Flutes Page H.1 Page H.1 Page H.1 Page H.1 Page H.1 H.0
4 Contents inex Soli Carbie rills 0 0 Harmetal twist rills Harmetal twist rills Harmetal twist rills Flutes Flutes Flutes (ong) Page H.0 Page H.1 Page H. Others 0 1 Soli carbie center rill Soli carbie center rill Soli carbie center rill Soli carbie Soli carbie Centerless groun for C.N.C. 0 for C.N.C. Countersinks Countersinks carbie Page H. Page H. Page H. Page H. Page H. Page H. Tungsten carbie burrs 0 Cylinrical 1 Cylinrical roun top Tree raius nose Tree pointe Cone Olive (Egg) Page H. Page H. Page H. Page H. Page H. Page H. Ball Inverte cone eburring 0 eburring 0 Page H. Page H. Page H.0 Page H.0 Boring heas rills Soli carbie Arbors an aaptors CANEA H.0
5 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. En mills Inserts Face milling 00 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes en mills. N/mm N/mm K AIN Square shouler Slot Porcupine Specific applications an Sets Soli carbie flutes en mills. (ong) Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN N/mm N/mm H.0
6 Arbors an aaptors En mills Soli Carbie Soli carbie flutes torus en mills for aluminium. <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes torus en mills for aluminium. (ong) <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN N/mm N/mm Soli carbie Boring heas rills CANEA H.0
7 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. En mills Inserts Face milling 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes en mills for aluminium. N/mm N/mm K AIN Square shouler Slot ,0 1,,0,,0,0,0,0,0,0 1,0 1,0 1,0 1,0 0, Specific applications an Sets Porcupine Soli carbie flutes en mills. Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN H.0
8 En mills Soli Carbie Soli carbie flutes en mills. (ong) <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes en mills <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie Boring heas rills Arbors an aaptors CANEA H.0
9 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. En mills Inserts Face milling 01 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes en mills. IN º N/mm N/mm K AIN Square shouler Slot Porcupine Specific applications an Sets Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes en mills. (ong) N/mm N/mm K AIN H.0
10 Arbors an aaptors En mills Soli Carbie Soli carbie en mills (Positive rake angle). For har machining. 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie en mills (Negative rake angle). For har machining <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN N/mm N/mm Soli carbie Boring heas rills CANEA H.0
11 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. En mills Inserts Face milling 00 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes en mills. N/mm N/mm K AIN Soli carbie Profile milling Specific applications an Sets Square shouler Slot Porcupine H.
12 Torus en mills Soli Carbie Soli carbie flutes torus en mills. <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes torus en mills. (ong) 1 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN 1 1 N/mm N/mm Arbors an aaptors Soli carbie Boring heas rills CANEA H.11
13 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Torus en mills Soli carbie flutes torus en mills. Inserts Face milling <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Square shouler Specific applications an Sets Porcupine Slot Soli carbie flutes torus en mills. (ong) Profile milling Soli carbie 1 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN 1 1 N/mm N/mm H.1
14 Contour en mills Soli Carbie Soli carbie flutes contour en mills for plastics. <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes contour en mills for plastics, with front cut <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm K AIN N/mm Soli carbie Boring heas rills Arbors an aaptors CANEA H.1
15 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Ball nose en mills Inserts Face milling 0 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes ball nose en mills. N/mm N/mm K AIN Square shouler Slot Specific applications an Sets Porcupine Soli carbie flutes ball nose en mills. (ong) Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN H.1
16 Ball nose en mills Soli Carbie Soli carbie flutes ball nose en mills for aluminium. <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes ball nose en mills for aluminium. (ong) 1 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC K AIN N/mm N/mm Soli carbie Boring heas rills Arbors an aaptors CANEA H.1
17 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Ball nose en mills Inserts Face milling <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC Soli carbie flutes ball nose en mills. N/mm N/mm K AIN Square shouler Slot Porcupine Specific applications an Sets Soli carbie flutes ball nose en mills. Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN H.1
18 Ball nose en mills Soli Carbie Soli carbie flutes ball nose en mills. 0 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes ball nose en mills <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie Boring heas rills Arbors an aaptors CANEA H.1
19 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Ball nose en mills Inserts Soli carbie flutes ball nose en mills. (ong) Face milling 0 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie Profile milling Specific applications an Sets Square shouler Slot Porcupine H.1
20 Copy ball nose Soli Carbie Soli carbie flutes ball nose copy milling. 1 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie flutes ball nose copy milling <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC 1 N/mm N/mm K AIN Soli carbie Boring heas rills Arbors an aaptors CANEA H.1
21 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. rills Inserts Harmetal twist rills Flutes IN x Z= 11 Face milling 0 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K K Square shouler Slot Porcupine Specific applications an Sets Profile milling Soli carbie H.0
22 H.1 CANEA rills Soli Carbie 0 INOX < N/mm INOX > N/mm <00 N/mm < N/mm <1.0 N/mm <1.00 N/mm > HRC K K Harmetal twist rills Flutes IN x Z= Soli carbie Boring heas rills Arbors an aaptors
23 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. rills Inserts Harmetal twist rills flutes (ong) IN x Z= 11 Face milling <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K K Square shouler Slot Porcupine Specific applications an Sets Profile milling Soli carbie H.
24 Others Soli Carbie Soli carbie center rill. 0 <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN ,1,1,1,00,00,00,00,00 1,00 0,0 1,00 1, 1,0,00,,1,00, , 1, 1,,,,,,,0 Soli carbie center rill for C.N.C. 0º <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Soli carbie Boring heas rills Arbors an aaptors CANEA H.
25 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Others Inserts Soli carbie center rill for C.N.C. º Face milling <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm K AIN Square shouler Porcupine Slot Specific applications an Sets Soli carbie countersinks flutes. º 0 Profile milling Soli carbie <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC,,,,,,, 1, 1, 1, 1, 1, 0,,0 1,0 N/mm N/mm z K AIN H.
26 Others Soli Carbie Soli carbie countersinks with raius. r <00 < <1.0 <1.00 > N/mm N/mm N/mm N/mm HRC N/mm N/mm r z K AIN ,0,0,0,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 0,0 1,0,,0, ,00 1, 1, 1,,00,,,00,,00,,00,00,00,00 1, Centerless groun carbie. K AIN Soli carbie Boring heas rills Arbors an aaptors CANEA H.
27 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Tungsten carbie burrs Inserts Straight Crosse Face milling Square shouler Cylinrical Straight r K AIN Slot 01 Cylinrical Crosse r K AIN Porcupine Specific applications an Sets Straight Crosse r Profile milling Soli carbie r K AIN 1 1 Cylinrical roun top Straight ,,0,0,0,0,0 11 Cylinrical roun top Crosse r K AIN ,0,0,0,0,0 H.
28 Tungsten carbie burrs Soli Carbie Straight Crosse r 0 Tree raius nose Straight r K AIN , 1,,0,,0,0 Tree raius nose Crosse 1 K AIN r ,,0,,0,0 Straight Crosse Tree pointe Straight r K AIN Soli carbie Tree pointe Crosse r K AIN Boring heas rills Arbors an aaptors CANEA H.
29 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Tungsten carbie burrs Inserts Straight Crosse Face milling Square shouler Cone Straight r K AIN Slot 1 Cone Crosse r K AIN Porcupine Specific applications an Sets Straight Crosse r Profile milling Soli carbie Olive (Egg) Straight r K AIN ,,,,0,0, Olive (Egg) Crosse 1 K AIN r ,,,0,0, H.
30 Tungsten carbie burrs Soli Carbie Straight Crosse Ball Straight 0 r K AIN Ball Crosse 1 K AIN r Straight Crosse r K AIN 1 1 Inverte cone Straight Soli carbie Inverte cone Crosse r K AIN Boring heas rills Arbors an aaptors CANEA H.
31 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Tungsten carbie burrs Inserts 0 Face milling Square shouler eburring K AIN Porcupine Slot Specific applications an Sets 0 Profile milling Soli carbie eburring K AIN H.0
32 Arbors an aaptors Boring heas rills Soli carbie Tungsten carbie burrs CANEA Soli Carbie H.1
33 For more information see page: Soli Carbie Technical information: H. En mills: H.0 Torus en mills: H.1 Contour en mills: H.1 Ball nose en mills: H.1 rills: H.0 Others: H. Tungsten carbie burrs: H. Technical information Inserts Cutting ata for soli carbie Material Conition Fee rate S=mm/ Ø Coolant Cutting spee m/min Face milling Structural steel Tool steel R.00/00 R.00/00 R.00/0 HB 0 HB 0/ Emulsion Emulsion Square shouler Stainless steel Semisteel Malleable cast iron Cast steel Cr. Mo Cr. Ni To 0 Over 0 R Emulsion cutting oil ryemulsion ryemulsion Emulsion tanium an titanium alloys Emulsion 00 Slot uminium & alloys Brass, copper, bronze % SI 1% SI Emulsion ryemulsion ayere plastics ry with suction 000 Porcupine Specific applications an Sets Cutting ata for soli carbie rills Material Structural steel Tool steel HRC 0/0 Conition R.00 R.0000 R.000 R.00 HB 0 HB 0/ Fee rate S=mm/ Ø Coolant Emulsion Emulsion Cutting spee m/min Profile milling Steel HRC Stainless steel Semisteel Malleable cast iron To 0 To R Emulsion Emulsion ry ry Soli carbie Cast steel tanium & titanium alloys uminium & alloys Brass, Copper, Bronze % SI 1% SI Emulsion Emulsion cutting oil Emulsion ry ayere plastics ry 0 H.
34 Technical information Soli Carbie Cutting ata for tungsten carbie burrs Material Conition HB Straight cut Kin of teeth Crosse cut Cutting spee m/min Unalloye steel C<0,% C<1<0,0% C,0% ow alloye steel Anneale Harene High alloye steel Anneale Harene High alloye steel Anneale high spee steel (HSS) Harene tool steel Stainless steel Ferriticmartensitic Steel casting Unalloye ow alloye High alloye Stainless steel Austenitic Stainless steel castings FerriticMartensitic Austenitic Manganese steel Malleable cast iron Ferritic Short chip Pearlitic ong chip Grey cast iron High traction resistant ow traction resistant 0 0 Noular cast iron Ferritic Pearlitic Shell cast iron 00 Practical avice The inicate ata are recommene applications with a strength of N. for manual Straight cutting flutes burrs Best surface finishing. Maximum chip removal in soft materials. Excellent tool life. Prouce neele chips. Increase the cutting spee for light eburring. For heavy operations, for instance by a robot, the cutting spee must be reuce. Crosse cutting flutes burrs low a lower spinle spee. Smoother operation, even allow spees. High chip removal in har an soft materials. Prouce short an roune chips. Soli carbie Type 0 Type 1 Type Type Type Surfaces an smooth eges Type Type Raius an surfaces General shapes Type Type Curve shapes with narrow spaces Type Narrow spaces Boring heas rills Complicate shapes Wele shapes an holes in curve surfaces Inverte cone shape 0º egrees chamfering º egrees chamfering Arbors an aaptors CANEA H.
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationModule 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
More informationL mm. 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNICAL DETAILS: - Super strength steel. L mm
aw blaes lot an mortise boring bits 163 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNCA ETA: - uper strength steel. - 2 HW precision groun cutting eges [Z2]. HW Z2 RH APPCATON:
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationMSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationThree Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
More informationcatalogotaglio02 cuttingtools02 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills
9 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese per cave End mills
More informationCUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
More informationChapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationSS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
More informationGermany Germany Brazil china France Great Britain india italy Japan korea mexico austria poland russia sweden switzerland spain Milling Turning
Milling Turning Establishe in 191, the KOMET GROUP has evelope into a worlwie partner in technology an supplier of complete systems an tool concepts boring, threa cutting an reaming by being constantly
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationNew in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationEnsat. Self-tapping inserts SOLID BODIES LINE
Ensat Self-tapping inserts SOLID BODIES LINE Index DESCRIPTION Page Presentation 3 Materials and Applications 4 Features 5 Preparing the receiving hole 6 Tools Codes 7 Ensat Series 302 Ensat Series 303
More informationHEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES. Page 1 Version no.: V0-090902
Page 1 HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES Page 2 Heavy-Duty Hand Cutting Torch HCT 663: With lever-operated valve for cutting oxygen, for cutting duties involving high thermal loads on slabs,
More informationSolid End Mill Series
Solid End Mill Series Carbide material Now available! For automatic lathe New! 57 types, 52 descriptions Easy to use total length of 35mm and 45mm are available Solid End Mill Series Kyocera's solid end
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationUDDEHOLM ELMAX SUPERCLEAN
UDDEHOLM ELMAX SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationMACHINING OPERATIONS AND MACHINE TOOLS
MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and
More informationHEAT TREATMENT OF STEEL
HEAT TREATMENT OF STEEL Heat Treatment of Steel Most heat treating operations begin with heating the alloy into the austenitic phase field to dissolve the carbide in the iron. Steel heat treating practice
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationUddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make the property profile
More informationModeling Curved Surfaces
Modeling Cylindrical and Curved Theory Views of Cylinders Contour Lines Extruded Surfaces Revolved Surfaces & Cutouts Profile Shape Axis of Revolution Swept Surfaces & Cutouts Profile Shape Path Curves
More informationSecolor Selection Guide. User s Manual. 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN
Secolor Selection Guide User s Manual 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN 1 INTRODUCTION...3 2 FEATURES...3 2.1 SEARCH FUNCTIONALITY...4 2.1.1 ISO / ANSI...4 2.1.2 Insert designation...4
More informationF 02 2-04-17 18.10 Sida F 2 HEAVY MACHINING F 2
HEAVY MACHINING 2 Table of contents HEAVY MACHINING Heavy turning Introduction Inserts Cutting data recommendations 4 5 9 Spare parts for HD cassettes 10 Technical information 11 Bar peeling Introduction
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationUDDEHOLM VANADIS 30 SUPERCLEAN
UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on
More informationDental Implants. You are correct, it is a labeling error. Here is your dental prosthesis!!!
Dental Implants You are correct, it is a labeling error. Here is your dental prosthesis!!! Manufacturing process of bridges, crowns, bone implants, fixtures, abutments. Manufacturing process of bridges,
More informationHigh speed steel Carbide tools Bud welded
Catalogus komcateng 01-2008 KIM Komeetstaal Postbus 51-7000 AB Doetinchem Fabriekstraat 42-7005 AR Doetinchem Tel: (0314) 343000 Fax: (0314) 332471 E-mail: info@komeetstaal.nl Site: www.komeetstaal.nl
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationLABORATORY EXPERIMENTS TESTING OF MATERIALS
LABORATORY EXPERIMENTS TESTING OF MATERIALS 1. TENSION TEST: INTRODUCTION & THEORY The tension test is the most commonly used method to evaluate the mechanical properties of metals. Its main objective
More informationProduct Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
More informationUDDEHOLM BALDER UDDEHOLM BALDER UDDEHOLM STEEL FOR INDEXABLE INSERT CUTTING TOOLS
UDDEHOLM BALDER Reliable and efficient steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be considered,
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationUddeholm Vanadis 4 Extra SuperClean. Uddeholm Vanadis 4 Extra SuperClean
Uddeholm Vanadis 4 Extra SuperClean 1 Uddeholm Vanadis 4 Extra SuperClean CONSISTENT TOOL PERFORMANCE LONG AND RELIABLE TOOL LIFE With an increased demand for just in time deliveries (JIT) and shorter
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationUDDEHOLM IMPAX SUPREME
UDDEHOLM IMPAX SUPREME Uddeholm Impax Supreme is a premium prehardened mould steel with very good polishing and texturing properties. Uddeholm Impax Supreme is available in a very wide dimensional range,
More informationGEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
More informationDrill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
More informationNEW INTERCHANGEABLE REAMING HEAD SYSTEM FAST
August 2007 / NEW029.1 / PAGE 1 OF 7 NEW INTERCHANGEABLE REAMING HEA YTEM FAT ACCURATE GOO FINIH Ingersoll is introducing the QwikReam, a new high speed reaming system. The QwikReam consists of an interchangeable
More informationMachining nickel alloys
NiDl Nickel Development Institute Machining nickel alloys A Nickel Development Institute Reference Book, Series N o 11 008 Table of Contents Acknowledgments... i Abbreviation key... i Introduction... ii
More informationRotabroach. Products and Accessories WWW.HOUGEN.COM
Rotabroach Industrial Products and Accessories WWW.HOUGEN.COM take control of your toughest production applications Rotabroach - The Energy Saver Rotabroach Cutters require far less horsepower than twist
More informationMulti-function tools EcoCut & ProfileMaster
Multi-function tools EcoCut & ProfileMaster EN CEATIZIT secrets of success Secrets of success CEATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CEATIZIT -
More informationDuplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
More informationMACHINING MAGNESIUM DATASHEET 254 ADVANTAGES
MACHINING MAGNESIUM DATASHEET 254 ADVANTAGES Magnesium is the lightest structural metal and exhibits excellent machinability. Some of the advantages of machining magnesium compared to other commonly used
More informationInno vation. Parting and grooving program HX Heavy duty machining - stability & process security
Inno vation Parting and grooving program HX Heavy duty machining - stability & process security EN Application - customer benefi ts Industries Power generation, turbine construction oll production Wind
More informationModule 7 Screw threads and gear manufacturing methods
Module 7 Screw threads and gear manufacturing methods Lesson 32 Manufacturing of Gears. Instructional objectives At the end of this lesson, the students will be able to (i) State the basic purposes of
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationINTRODUCTION UNDERSTANDING THE PRODUCT ABRASIVE TYPES
INTRODUCTION From standard aluminum oxide bench wheels to premium ceramic abrasive surface grinding wheels, Norton offers high performance abrasive solutions that can maximise productivity in virtually
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationApplication Material Guide (AMG) Chart found on back cover 1-800-877-3745
Application Material Guide (AMG) Chart found on back cover Precision Dormer has expanded its range of high performance drills with the new. Manufactured with productivity and performance in mind, the HYDRA
More informationCOMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationTubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
More informationThe Ensat self-tapping threaded insert...
The Ensat selftapping threaded insert... Ensat is a selftapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationHIGH-PERFORMANCE REAMING. HORN-System DR. License. Modular Tooling System Ø 11.9-140.6 mm. In the UNITED STATES call us toll free 1-888 - 818 HORN
HIGH-PERFORMANCE REAMING R HORN-System DR License Modular Tooling System Ø 11.9-140.6 mm R1 R HIGH-PERFORMANCE REAMING INSERT type DR straight fluted Cutting edge Ø Ds 11.900-140.600 mm for through hole
More informationBLS 100 Orifice Plate DIN 19206
E91 2006 1Orifice Plate, Orifice Flange, Meterrun, Restriction Orifice Application Flow rate measurement of aggressive an nonaggressive meia particularly for large pipelines. Construction Orifice plate
More informationMATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
More informationVARDEX. Vardex Advanced Threading Solutions. Thread Milling. Thread Turning
VA R D E X I n d u s t r i a l S o l u t i o n s 2011-2012 METRIC VARDEX Vardex Advanced Threading Solutions VARGUS Ltd. is a world leading developer, manufacturer and supplier of high-quality, precision
More informationTechnical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationDESS. Screws. Tijuana Ventas: (664) 685 6294/95 hirambogarin@dabocorp.com. For all major implant systems!! www.dabocorp.com
Screws Screws for definitive use. Made from medical grade 5 ELI Titanium Integrity and soundness guaranteed by stress tests of up to 150% of their nominal torques. Their designs ensure a perfect fit with
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationAlloys & Their Phase Diagrams
Alloys & Their Phase Diagrams Objectives of the class Gibbs phase rule Introduction to phase diagram Practice phase diagram Lever rule Important Observation: One question in the midterm Consider the Earth
More informationCNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationCLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
More informationHow To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
More information3. Geberit Pluvia Roof Drainage Systems
3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets...52 3.1 Roof outlets... 53 3.1.1 Roof outlets up to 25 l/s...53 3.1.2 Roof outlets up to 100 l/s...55 3.2 Roof outlets for gutters...
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More informationMachining recommendation for AMPCO and AMPCOLOY-alloys Compared to steel 1.7225
Machining recommendation for AMPCO and AMPCOLOY-alloys Compared to steel 1.7225 General guidelines The recommendations for the machining of AMPCO and AMPCOLOY materials are based on extensive tests made
More informationBSME Series SEXC Series
TOOLING NEWS E-124 P M K N S H CBN Small Hole Boring Bar Systems BSME Series SEXC Series BSME SEXC Series with brazed CBN cutting edge Minimum bore diameter = 2,5mm Series with indexable CBN insert Minimum
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationMaterial Expansion Coefficients
17 Material Expansion Coefficients Linear Thermal Expansion Coefficients of Metals and Alloys Table 17-1 provides the linear thermal expansion coefficients of the most frequently used metals and allows.
More informationMueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
More informationComputer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills
1 of 6 9/9/2014 3:59 PM I. Catalog Information Credit- Degree applicable Effective Quarter: Fall 2014 MCNC 75B Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced
More informationPROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationDiamond and CBN grinding wheels for the perfect finish
Diamond and CBN grinding wheels for the perfect finish The proven product range with maximum tool life A wide selection for the perfect finish The use of high performance abrasives has become an important
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationBonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
More informationHeat Treatment of Steel
Heat Treatment of Steel Steels can be heat treated to produce a great variety of microstructures and properties. Generally, heat treatment uses phase transformation during heating and cooling to change
More information