Standard 7-Segment Display 7 mm
|
|
- Alvin Glenn
- 7 years ago
- Views:
Transcription
1 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 Standard 7-Segment Display 7 mm DESCRIPTION 9235 The TDS... series are 7 mm character seven segment LED displays in a very compact package. The displays are designed for a viewing distance up to 3 m and available in four bright colors. The grey package surface and the evenly lighted untinted segments provide an optimum on-off contrast. All displays are categorized in luminous intensity groups. That allows users to assemble displays with uniform appearence. Typical applications include instruments, panel meters, point-of-sale terminals and household equipment. FEATURES Evenly lighted segments Grey package surface Untinted segments Luminous intensity categorized Yellow and green categorized for color Wide viewing angle Suitable for DC and high peak current Material categorization: for definitions of compliance please see /doc?9992 APPLICATIONS Panel meters Test- and measure-equipment Point-of-sale terminals Control units PRODUCT GROUP AND PACKAGE DATA Product group: display Package: 7 mm Product series: standard Angle of half intensity: ± 5 PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (μcd) at I F (nm) at I F (V) at I F (ma) (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. CIRCUITRY TDSO5 Orange red Common anode TDSO5-K Orange red Common anode TDSO5-KL Orange red Common cathode TDSO6 Orange red Common cathode TDSO6-K Orange red Common cathode TDSO6-KL Orange red Common cathode TDSY5 Yellow Common anode TDSY5-K Yellow Common anode TDSY5-KL Yellow Common anode TDSY6 Yellow Common cathode TDSG5 Green Common anode TDSG5-LM Green Common anode TDSG6 Green Common cathode TDSG6-LM Green Common cathode Rev. 2.3, 2-Apr-6 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
2 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TDSO5, TDSO6, TDSY5, TDSY6, TDSG5, TDSG6 PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage per segment or DP V R 6 V DC forward current per segment or DP I F 7 ma Surge forward current per segment or DP t p μs (non repetitive) I FSM.5 A Power dissipation T amb 45 C P V 4 mw Junction temperature T j C Operating temperature range T amb -4 to +85 C Storage temperature range T stg -4 to +85 C Soldering temperature t 3 s, 2 mm below seating plane T sd 26 C Thermal resistance LED junction / ambient R thja 4 K/W OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSO5, TDSO5-K, TDSO6, TDSO6-K, TDSO6-KL, ORANGE RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSO5 I V TDSO5-K 8-36 Luminous intensity per segment TDSO5-KL 8-56 (digit average) () I F = ma TDSO μcd TDSO6-K 8-36 TDSO6-KL 8-56 Dominant wavelength I F = ma TDSO5, λ d nm Peak wavelength I F = ma TDSO5-K, λ p nm Angle of half intensity I F = ma TDSO5-KL, TDSO6, j - ± 5 - deg Forward voltage per segment or DP I F = 2 ma TDSO6-K, V F V Reverse voltage per segment or DP I R = μa TDSO6-KL V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is.5, excluding decimal points and colon. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSY5, TDSY5-K, TDSY5-KL, TDSO6, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSY Luminous intensity per segment TDSY5-K 8-36 (digit average) () I F = ma I V TDSY5-KL 8-56 μcd TDSY Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma TDSY5, λ p nm Angle of half intensity I F = ma TDSY5-K, TDSY5-KL. j - ± 5 - deg Forward voltage per segment or DP I F = 2 ma TDSY6 V F V Reverse voltage per segment or DP I R = μa V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is.5, excluding decimal points and colon. Rev. 2.3, 2-Apr-6 2 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
3 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSG5, TDSG5-LM, TDSG6, GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSG Luminous intensity per segment TDSG5-LM 28-9 (digit average) () I F = ma I V TDSG μcd TDSG6-LM 28-9 Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma TDSG5, λ p nm Angle of half intensity I F = ma TDSG5-LM, TDSG6, j - ± 5 - deg Forward voltage per segment or DP I F = 2 ma TDSG6-LM V F V Reverse voltage per segment or DP I R = μa V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is.5, excluding decimal points and colon. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (μcd) STANDARD MIN. MAX. E 8 36 F G 45 9 H 7 4 I 22 K 8 36 L M 45 9 N 7 4 Note The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped in one tube (there will be no mixing of two groups in one tube). In order to ensure availability, single brightness groups will not be orderable. COLOR CLASSIFICATION GROUP ORANGE RED YELLOW GREEN MIN. MAX. MIN. MAX. MIN. MAX Note Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± nm. TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) I F - Forward Current (ma) T amb - Ambient Temperature ( C) ϕ - Angular Displacement Fig. - Forward Current vs. Ambient Temperature Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Rev. 2.3, 2-Apr-6 3 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
4 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 I - Forward Current (ma) F. Orange Red 2 4 t p /T=. t p =µs Orange Red 8794 V F - Forward Voltage (V) 8797 I F - Forward Current (ma) Fig. 3 - Forward Current vs. Forward Voltage Fig. 6 - Relative Luminous Intensity vs. Forward Current I Vrel - Relative Luminous Intensity Orange Red I F =ma I rel - Relative Intensity Orange Red T amb - Ambient Temperature ( C) Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature λ - Wavelength (nm) Fig. 7 - Relative Intensity vs. Wavelength 69 I V rel - Specific Luminous Intensity Orange Red I FAV = ma, const Fig. 5 - Relative Luminous Intensity vs. Forward Current / Duty Cycle I F (ma) t p /T I F - Forward Current (ma). yellow 2 4 Fig. 8 - Forward Current vs. Forward Voltage 6 t p /T =. t p = µs 95 3 V F - Forward Voltage (V) 8 Rev. 2.3, 2-Apr-6 4 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
5 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY yellow I F = ma T amb - Ambient Temperature ( C) I rel - Relative Intensity yellow λ - Wavelength (nm) 65 Fig. 9 - Relative Luminous Intensity vs. Ambient Temperature Fig. 2 - Relative Intensity vs. Wavelength I spec - Specific Luminous Intensity yellow I F (ma) t p /T I F - Forward Current (ma). green t p /T =. t p = µs V F - Forward Voltage (V) 8 Fig. - Relative Luminous Intensity vs. Forward Current / Duty Cycle Fig. 3 - Forward Current vs. Forward Voltage yellow I F - Forward Current (ma) green I F = ma T amb - Ambient Temperature ( C) Fig. - Relative Luminous Intensity vs. Forward Current Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature Rev. 2.3, 2-Apr-6 5 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
6 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 I spec - Specific Luminous Intensity green I F (ma) t p /T I rel - Relative Intensity green λ - Wavelength (nm) 62 Fig. 5 - Specific Luminous Intensity vs. Forward Current Fig. 7 - Relative Intensity vs. Wavelength. green a f b g e c d DP e 2 d 3 A(C) 4 c 5 DP 6 b 7 a 8 A(C) 9 g f I F - Forward Current (ma) Fig. 6 - Relative Luminous Intensity vs. Forward Current Fig. 8 - TDS... PACKAGE DIMENSIONS FOR TDS... in millimeters Drawing-No.: Issue: ; Rev. 2.3, 2-Apr-6 6 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?
7 VISHAY Display-7 mm Display-7 mm Package Dimensions in mm Document Number Rev.., 8-Mar-4
8 Display-7 mm VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany Telephone: 49 () , Fax number: 49 () Document Number Rev.., 8-Mar-4
9 VISHAY Pin Connections 7 mm Pin Connections 7 mm a f b g e c d DP e 2 d 3 A(C) 4 c 5 DP 6 b 7 a 8 A(C) 9 g f Document Number Rev.., 7-Jul-4
10 Pin Connections 7 mm VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany Telephone: 49 () , Fax number: 49 () Document Number Rev.., 7-Jul-4
11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9
Reflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E
More informationHigh Intensity SMD LED High Intensity SMD LED
High Intensity SMD LED High Intensity SMD LED TLME31 Color Type Technology Angle of Half Intensity ± Yellow TLME31 AlInGaP on GaAs 6 Description This device has been designed to meet the increasing demand
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationGaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package
GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package Description TSIL64 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, bluegrey tinted plastic packages. In comparison
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationHow To Use A Kodak Kodacom 2.5D (Kodak) With A Power Supply (Power Supply) And Power Supply
Reflective Optical Sensor with Transistor Output Description The CNY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationStandard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
More informationBPW34. Silicon PIN Photodiode VISHAY. Vishay Semiconductors
Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationOptocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationTransmissive Optical Sensor with Phototransistor Output
TCST11. up to TCST23. Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face
More informationOptocoupler, Phototransistor Output, with Base Connection
HA/HA2/HA3/HA4/HA5 FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in line 6-pin package A C NC 2 3 6 5 4 B C E Isolation test voltage: 5300
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationOptocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package
Optocoupler, Phototransistor Output, FEATURES High BV CEO, 70 V Vishay Semiconductors i79002 A K NC NC 2 3 4 8 7 6 5 NC B C E Isolation test voltage, 4000 V RMS Industry standard SOIC-8A surface mountable
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationParameter Test Conditions Symbol Value Unit Junction ambient l=4mm, T L =constant R thja 110 K/W
Silicon Epitaxial Planar Z Diodes Features Sharp edge in reverse characteristics Low reverse current Low noise Very high stability Available with tighter tolerances Applications Voltage stabilization 94
More informationReflective Optical Sensor with Transistor Output
www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationK817P/ K827PH/ K847PH. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. Features.
Optocoupler with Phototransistor Output Description The K817P/ K827PH/ K847PH consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 4-lead up to 16 lead plastic
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationReflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationPhoto Modules for PCM Remote Control Systems
Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type fo Type fo TSOP183 3 khz TSOP1833 33 khz TSOP1836 36 khz TSOP1837 36.7 khz TSOP1838 38 khz TSOP184 4
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationUV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationOptocoupler, Phototransistor Output, With Base Connection
IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationZero Voltage Switch with Adjustable Ramp. R 2 (R sync ) 220 k (250 V~) Synchronization. Full wave logic Pulse amplifier. 58 k N
Zero Voltage Switch with Adjustable Ramp U217B/ U217B-FP Description The integrated circuit, U217B, is designed as a zerovoltage switch in bipolar technology. It is used to control resistive loads at mains
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationReflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output Description The NY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationDome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm)
Dome Lens SMD LED VLD.1235R... DESCRIPTION VLD.1235G... The dome lens SMD LED series has been designed in a small untinted and clear molded package with lens for surface mounting as gullwing or reverse
More informationIR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications MECHANICAL DATA Pinning: = OUT, 2 = GND, 3 = V S 2 3 6672 APPLICATIONS Reflective sensors for hand dryers, towel or
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationTEA1024/ TEA1124. Zero Voltage Switch with Fixed Ramp. Description. Features. Block Diagram
Zero Voltage Switch with Fixed Ramp TEA04/ TEA4 Description The monolithic integrated bipolar circuit, TEA04/ TEA4 is a zero voltage switch for triac control in domestic equipments. It offers not only
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More information5 V, 1 A H-Bridge Motor Driver
, A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationStandard Recovery Diodes (Hockey PUK), 2100 A
Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationHDSP- HDSP- HDSP- HDSP-
7.6 mm (.3 inch) Micro Bright Seven Segment Displays Technical Data HDSP-74x Series HDSP-75x Series HDSP-78x Series HDSP-A5x Series HDSP-A4x Series Features Available with Colon for Clock Display Compact
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationPower MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationPower MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching
More informationPower MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 19225 DESCRIPTION This device has been designed to meet the increasing demand for white SMD LED. The package of the VLMW41.. is the PLCC-2. It consists of a lead frame which is
More informationPower MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.
More informationP-Channel 1.25-W, 1.8-V (G-S) MOSFET
Si5DS P-Channel.5-W,.-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = -.5 V ±.5 -.7 at V GS = -.5 V ±. at V GS = -. V ± FEATURES Halogen-free According to IEC 9-- Available TrenchFET
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved
More informationKnob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
More informationMetal Film Resistors, Pulse Withstanding Protective
End of Life - August 213 www.vishay.com Metal Film Resistors, Pulse Withstanding Protective STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING P 7 C W FEATURES Special design provides lightning
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.
Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications
More informationHigh-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC
Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationVJ 6040 UHF Chip Antenna for Mobile Devices
VJ 64 UHF Chip Antenna for Mobile Devices VJ 64 The company s products are covered by one or more of the following: WO2862 (A1), US2833 (A1), US283575 (A1), WO281173 (A1). Other patents pending. DESCRIPTION
More informationP-Channel 60 V (D-S) MOSFET
TP6K P-Channel 6 V (D-S) MOSFET G S PRODUCT SUMMARY V DS (V) R DS(on) ( ) V GS(th) (V) I D (ma) - 6 6 at V GS = - V - to - - 85 TO-6 (SOT-) Top View D Marking Code: 6Kwll 6K = Part Number Code for TP6K
More information