Miniature push-pull connectors with ground function

Transcription

1 Miniature push-pull connectors with ground function MXR Series Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Rated current Rated voltage Operating temperature range Storage temperature range Features 1. User friendly lock mechanism The single action push-pull lock function allows quick connections and disconnections as well as high density mounting. 2. Grounding function for FCC compliance Metal, outer shell provides stable contact for grounding.. Sequential contact structure A sequential mating type is available. This version allows for the contacts to mate in a sequenced order. Number of contacts Number of contacts to +85 ç -1 to +6 ç Items Specifi cations Conditions 1. Contact resistance A maximum of 2 mø Measured at DC 1 A 2. Insulation resistance A minimum of 1, Mø Measured at DC 1 V. Withstanding voltage No flashover or dielectric breakdown. AC V for one minute 4. Vibration resistance 5. Shock resistance No electrical discontinuity for 1 µs or greater. No electrical discontinuity for 1 µs or greater. 6. Mating cycles Contact resistance : a maximum of 4 mø 1, times Rated current 2A Rated voltage AC 1, DC 14 V 1 to 55 Hz/cycle, amplitude:.75 mm, axis directions, 2 hours each Acceleration : 49 m/s 2, duration : 11 ms axis directions, times each 7. Temperature cycle 8. Moisture resistance Insulation resistance : a minimum of 1, Mø Insulation resistance : a minimum of 1 Mø (at high humidities) a minimum of 1 Mø (when dry) -55ç : minutes Normal temperature : 1 to 15 minutes 85ç: minutes Normal temperature : 1 to 15 minutes, left for 5 cycles Temperature : 4 C, relative humidity : 9 to 95%, left for 96 hours Materials Part Material Finish Remarks Shell Aluminum alloy Nickel plating Insulator PBT resin UL94V- Contact Copper alloy Gold plating, partial gold plating w 1

2 Product number structure MXR - 8 P A - P B (**) qseries name : MXR Series wshell size : Indicates the outer shell diameter at the mating end. eshell classifi cation : Classified as follows P : Plug R : Receptacle Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. r Shell modifi cation : The letters A, B, C, D, E, etc. indicate modifi cations of the shell form. tpin arrangement : Indicated by the number of pins ypin form : Classifi ed as follows P : Male contacts S : Female contacts u Pin modification : The letters A, B, C, D, E, etc. indicate modifications of the pin form. ispecial specifi cations: A two-digit number is added to indicate other specifi cations, such as (1), (2), ()... Plug MXR-8P-8P(71) Part No HRS No. A ØB Weight Bushing Remarks MXR-8PA-PB(71) MXR-8PA-4PB(71) g Sequenced construction Black MXR-8PA-6PB(71) MXR-8P-8P(71) g MXR-8P-8P(72) White Note: Cable pull force, twisting strength and other characteristics may differ, depending on cable specifications and structure. Please evaluate under the actual conditions prior the use. 1 2 Ø1.9 A (Representative shape example) Suitable cable diameter ØB Receptacle (Secured with hex nut for mounting) Solder termination Panel Guide Ø1.5 Ø MXR-8RA-8S(71) 19 A 9 (Representative shape example) Part No. HRS No. Weight A Remarks MXR-8RA-S(71) MXR-8RA-4S(71) g MXR-8RA-6S(71) MXR-8RA-8S(71)

3 Receptacle (Flange type) Dip termination Panel M Guide Ø1.5 Min. Ø Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MXR-8R-8SA(71) Part No. HRS No. Weight Remarks MXR-8R-SA(71) MXR-8R-4SA(71) MXR-8R-6SA(71) g with gold-plated contacts MXR-8R-8SA(71) Layout dimensions for dip post contacts 4.1±.5.8±.5 1.7±.5 4.1±.5 1.2±.5 1±.5 2.2±.5 -Ø pin 1.9±.5 1.9±.5 1.5±.5 1.5±.5 6 pin 2±.5 2±.5 1.9±.5 1.9±.5 6-Ø ±.5 2±.5 Ø Ø Ø Ø ±.5 2.±.5 2.6±.5.4±.5 4 pin 1.7±.5 1.2±.5 1.2±.5 2±.5 2±.5 1.4± ±.5 2.±.5.5± Ø Ø Ø ±.5.98± ±.5 8 pin (Representative example) 2±.5 2-Ø ± ±.5 Ø ± ±.5 2-Ø ±.5 2.1±.5 2.9± ±.5.77±.5.5±.5 Remarks : Figures are views from the mating side of the receptacle. Marks show the position of the guide.

4 Wiring and Assembly Procedure MXR-8PA-PB(71), MXR-8PA-4PB(71), MXR-8PA-6PB(71) P shell unit Clamp Plug body Cable bushing Cable 7 or greater Spanner spacing of 9.5 Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MXR-8P-8P(71) P shell unit 15 Work Procedure 1. Pass the cable through the components in this order: 1. cable bushing, 2. plug body,. clamp fitting. Then perform the cable end processing. 2. Solder the wires to the P shell unit.. Align the protruding portion of the clamp with the recessed portion of the P shell unit and mount. 4. Align the plug and cable sheath strip position, then tighten the plug body to the screw portion of the P shell unit with a torque of 1 N m. Note that to prevent loosening, an application of Locktight 26 manufactured by HENKEL JAPAN LTD. is recommended. 5. Put the cable bushing over the clamp body to complete the job. 2 or greater 18 Clamp fitting Boss Plug body Cable bushing Set screw Spanner spacing of 1 Work Procedure 1. Pass the cable through the components in this order: 1. cable bushing, 2. plug body. Then perform the cable end processing. 2. Solder the wires to the P shell unit.. Fasten the clamp fitting to the cable with the cable crimping tool (HR1A-TC-4). 4. Tighten the clamp body to the screw portion of the P shell unit with a torque of 1 N m. Note that to prevent loosening, an application of Locktighe 26 manufactured by HENKEL JAPAN LTD. is recommended. 5. Tighten the set screw so that the tip falls into one of the two bosses of the clamp fitting. Note that a tightening torque of. N m. is specified. 6. Put the cable bushing over the clamp body to complete the job. Cable 4

5 Dimensions for receptacle mounting holes Guide position Ø ±.5 Guide position Ø Ø Panel thickness 1 to 4mm 1.5±.5 Panel thickness Max 1.6mm Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Applicable Tools Type Part No. HRS No. Applicable Connectors Tightening jig MXR-8P-T All plug products Cable crimping tool HR1A-TC MXR-8P-8P Pin arrangement and electrical specifications Number of contacts Pin arrangement (Jam Nut Type) NOTES : 1. Above figures are views from the mating side of the receptacle. Also note that the symbol indicates the guide position. MXR-8P-T1 (Flange Type) HR1A-TC-4 Withstanding voltage Current capacity Insulation resistance Contact resistance Solder pot diameter V AC for 1 minute 2 A 1, Mø or greater at 1 V DC 2 mø or less at 1A DC.9 mm dia. NOTES : 1. Above figures are views from the mating side of the receptacle. Also note that the symbol indicates the guide position. 2. The withstand voltage value indicates the test voltage. The connector should normally be used at less than 5 V AC or 7 V DC. 5

6 Powered by TCPDF ( MXR Series Miniature push-pull connectors with ground function HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2688 Westhills Court, Simi Valley, CA Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 255 Scott Boulevard, Building 7, Suite 11 Santa Clara, CA 9554 Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 58 Waters Edge Lane, Suite 25 Lombard IL 6148 Phone : Mail : inquiries@hirose.com Sep Copyright 216 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) Laurel Office Park III Laurel Park Drive Suite 25 Livonia, MI Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str Nuernberg Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 9-1, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 52 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 5188 Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 111 CC Amsterdam Z-O Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr., Haus C 855 Langenhagen, Germany Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 161, Henderson Metropolitan, NO., East Nanjing Road, Huangpu District, Shanghai, China 21 Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 11, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 1 Anson Road #26-1, International Plaza 799, Singapore Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-776 Ostfildern (Scharnhauser Park) Phone : Fax : FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 9225, France Phone : + () Fax : + (1) CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A11, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 125 Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 1 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 211, Uttar Pradesh, India Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No., Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 5666 Karnataka, India Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD , Penang Cybercity (1164),Lintang Mayang Pasir,1195, Bayan Baru, Penang, Malaysia. Phone : Fax : THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 47, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 112 Thailand Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 1/215. Contents are subject to change without notice for the purpose of improvements.