0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
|
|
|
- Oscar Freeman
- 7 years ago
- Views:
Transcription
1 .4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Features 1. High density mounting Space saving design that has a minimum connector width, yet still retains a sufficient vacuum area for easy pick-and-place mounting Minimum width: 3.38 mm 2. Multiple stack height options In addition to its space saving design, several stack heights are available and add versatility to any application. Stack heights: 1.5 mm, 2. mm, 2.5 mm, 3. mm, 3.5 mm, and 4. mm. 3. High contact reliability Despite its small stature and low profile, the contacts deliver strong contact forces and an effective mating length of.45 mm on the 1.5 mm stacking height. This connector utilizes a locking system that prevents accidental unmating issues and emits a clear tactile click to ensure that mating has been completed. 4. Excellent self-aligning range The use of guide ribs allows.33 mm of selfalignment on this connector. 5. Reinforced structure with shock absorbing ribs Both sides of the connector have been reinforced with the addition of shock absorbing ribs. 6. Solder wicking prevention Nickel-plated barriers were added to protect the contact areas from potential solder wicking. 7. Contamination resistant design When mated, the connector s design covers the contacts which help to keep dust and other debris away from the contacts. The SMT leads are kept very close to the connector housing which also helps to prevent shorts caused by debris on the exposed contacts 8. RoHS compliant Environment friendly and does not use RoHS specified prohibited materials. All materials and substances used to produce these parts comply with the RoHS standards. 9. High speed signal with noise prevention The shielded type can support high speed signal transmissions with noise prevention. High contact reliability - effective mating length.45 mm Stacking height variations Standard type Stacking height mm mm mm mm mm mm Δ : Products under development Shielded type Stacking height mm mm No. of Contact No. of Contacts
2 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Product Specifications Ratings Rated Current.3A Rated Voltage AC,DC 3V Operating Temperature Range (Note 1) Operating Humidity Range 2 8% Storage Temperature Range -1 6 (Note 2) Storage Humidity Range 4 7% (Note 2) Items Specifications Conditions 1. Insulation Resistance Minimum of 5 Mø Measured with DC 1 V 2. Withstanding Voltage No flashover or breakdown Apply AC 1 V for 1 minute 3. Contact Resistance Maximum of 9 mø Measured with AC 2 mv, 1 khz and 1 ma 4. Vibration Resistance No electrical discontinuity of 1μs or greater Frequency 1-55 Hz, half amplitude.75 mm, 3 directions for 2 hours 5. Humidity Resistance 6. Temperature Cycles Contact resistance Maximum of 9 mø Insulation resistance Minimum of 25 mø Contact resistance Maximum of 9 mø Insulation resistance Minimum of 5 mø Left at temperature 4 ± 2ç, humidity 9 to 95%, 96 hours ( 55ç: 3 minutes 5~35ç: 1 minutes 85ç: 3 minutes 5~35ç: 1 minutes) 5 cycles 7. Durability Contact Resistance: Maximum of 9 mø 3 mating cycles 8. Soldering Heat Resistance Should be no melting of resin parts that affects its performance Refl ow: according to the Recommended Temperature Profi le Hand solder: Soldering iron temperature 35ç, no more than 3 seconds. Note 1: Includes temperature rise caused by current fl ow. Note 2: The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage conditions during transportation, etc. Materials (Standard, non shielded type) Product Component Materials Finish UL Regulation Receptacle Header Materials (Shielded type) Insulator LCP Black UL94V- Contact Phosphor bronze Gold plating Insulator LCP Black UL94V- Contact Phosphor bronze Gold plating Product Component Materials Finish UL Regulation Receptacle Header Insulator LCP Black UL94V- Contact Phosphor bronze Gold plating Shield plate Phosphor bronze Gold plating Insulator LCP Black UL94V- Contact Phosphor bronze Gold plating Reinforcing metal fitting Phosphor bronze Gold plating
3 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Product Number Structure (Standard, non-shielded type) Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. Receptacle DF4 # (**) * DS.4 V (**) Series Name: DF4 Style C: Without reinforcing metal fitting HC: Without reinforcing metal fitting (The H denotes a stacking height 2.5 mm or above) Stacking height Display Stacking height None 1.5mm 2. 2.mm mm 3. 3.mm mm 4. 4.mm No. of Contacts Connector Type DS: Double row receptacle Contact Pitch:.4mm Mating direction Shape V: Vertical SMT Packaging Type (51) Embossed tape packaging Header DF4 # * DP.4 V (**) Series Name: DF4 Style C: Without reinforcing metal fitting No. of Contacts Connector Type DP: Double row pin header Contact Pitch:.4 mm Mating direction V: Vertical SMT Packaging Type (51) Embossed tape packaging Product Number Structure ( Shielded type) Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. Receptacle DF4 GB (**) * DS.4 V (**) Series Name: DF4 Style GB: With shield Header Stacking height No. of Contacts DF4 GB * DP.4 V (**) Connector Type DS: Double row receptacle Contact Pitch:.4 mm Mating direction V: Vertical SMT Packaging Type (51) Embossed tape packaging Series Name: DF4 Style GB: With reinforcing metal fitting (For use with shielded product ) No. of Contacts Connector Type DP: Double row pin header Contact Pitch:.4 mm Mating direction V: Vertical SMT Packaging Type (51) Embossed tape packaging 3
4 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 1.5 mm) P=.4±.5 A±.2 B± ± ±.2.12±.2 Vacuum pick up area : C±.2 D±.15 BRecommended PCB layout Stacking height 1.5 mm Specification No. (51): Embossed package 5, pieces per reel Part No. HRS No. No. of Contacts A B C D RoHS DF4C-1DS-.4V(51) CL DF4C-12DS-.4V(51) Under development DF4C-2DS-.4V(51) CL DF4C-24DS-.4V(51) CL DF4C-3DS-.4V(51) CL DF4C-34DS-.4V(51) CL DF4C-4DS-.4V(51) CL DF4C-5DS-.4V(51) CL DF4C-6DS-.4V(51) CL DF4C-7DS-.4V(51) CL DF4C-8DS-.4V(51) CL DF4C-9DS-.4V(51) CL DF4C-1DS-.4V(51) CL (Note 1) Please place orders by full reel quantities. (Note 2) The surface of the 6-1 pos. parts have a small, concave section that will not affect the vacuum pick up operation. (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 4
5 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 2. mm) P=.4±.5 A±.2 B± ± ±.2.12±.2 Vacuum pick up area : C±.2 D±.15 BRecommended PCB layout Stacking height 2. mm Specification No. (51): Embossed package 4, pieces per reel Part No. HRS No. No. of Contacts A B C D RoHS DF4C(2.)-12DS-.4V(51) CL DF4C(2.)-2DS-.4V(51) CL DF4C(2.)-24DS-.4V(51) CL DF4C(2.)-3DS-.4V(51) CL DF4C(2.)-4DS-.4V(51) CL DF4C(2.)-5DS-.4V(51) CL DF4C(2.)-6DS-.4V(51) CL DF4C(2.)-7DS-.4V(51) CL DF4C(2.)-8DS-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) The surface of the 6-1 pos. parts have a small, concave section that will not affect the vacuum pick up operation. (Note 3) PCB layout prohibited area. (Note 4)This connector is NOT polarized (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 5
6 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 2.5 mm to 4. mm) P=.4±.5 A±.2 B± ± ±.2.12±.2 Vacuum pick up area : C±.2 D±.15 BRecommended PCB layout Stacking height 2.5 mm Specification No. (51): Embossed package 3, pieces per reel Part No. HRS No. No. of Contacts A B C D RoHS DF4HC(2.5)-1DS-.4V(51) Under development DF4HC(2.5)-2DS-.4V(51) CL DF4HC(2.5)-4DS-.4V(51) CL DF4HC(2.5)-5DS-.4V(51) CL DF4HC(2.5)-6DS-.4V(51) CL Stacking height 3. mm Specification No. (51): Embossed package 3, pieces per reel Part No. HRS No. No. of Contacts A B C D RoHS DF4HC(3.)-3DS-.4V(51) CL DF4HC(3.)-44DS-.4V(51) CL DF4HC(3.)-5DS-.4V(51) CL DF4HC(3.)-6DS-.4V(51) CL DF4HC(3.)-7DS-.4V(51) CL DF4HC(3.)-8DS-.4V(51) CL DF4HC(3.)-9DS-.4V(51) CL DF4HC(3.)-1DS-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) The surface of the 6-1 pos. parts have a small, concave section that will not affect the vacuum pick up operation (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized. (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 6
7 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Stacking height 3.5 mm Specification No. (51): Embossed package 2, pieces per reel Part No. HRS No. No. of Contacts A B C D RoHS DF4HC(3.5)-2DS-.4V(51) CL DF4HC(3.5)-3DS-.4V(51) CL DF4HC(3.5)-4DS-.4V(51) CL DF4HC(3.5)-5DS-.4V(51) CL DF4HC(3.5)-6DS-.4V(51) CL DF4HC(3.5)-8DS-.4V(51) CL Stacking height 4. mm Part No. HRS No. No. of Contacts A B C D RoHS DF4HC(4.)-4DS-.4V(51) Under development DF4HC(4.)-5DS-.4V(51) Under development DF4HC(4.)-6DS-.4V(51) CL DF4HC(4.)-8DS-.4V(51) CL DF4HC(4.)-9DS-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) The surface of the 6-1 pos. parts have a small, concave section that will not affect the vacuum pick up operation (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized. (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 7
8 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 1.5 mm, with shield) < 3 contact > P=.4.5 Vacuum pick up area: 1.5± P=.4.2 P= MAX MAX < 48 contact > P= Vacuum pick up area: 3.2± BRecommended PCB layout < 3 contact > < 48 contact > Stacking height 1.5mm Specification No. (51): Embossed package 5, pieces per reel Part No. HRS No. No. of Contacts Signal contact Ground contact RoHS DF4GB(1.5)-3DS-.4V(51) CL DF4GB(1.5)-48DS-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) PCB layout prohibited area. (Note 3) This connector is NOT polarized 8
9 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 3. mm, with shield) < 48 contact > P= Vacuum pick up area: 3.2± P= P= MAX < 7 contact > P= Vacuum pick up area: 3.2± BRecommended PCB layout < 48 contact > < 7 contact > Stacking height 3.mm Specification No. (51): Embossed package 3, pieces per reel Part No. HRS No. No. of Contacts Signal contact Ground contact RoHS DF4GB(3.)-48DS-.4V(51) CL DF4GB(3.)-7DS-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) The surface of the 7 pos. part have a small, concave section that will not affect the vacuum pick up operation (Note 3) This connector is NOT polarized. 9
10 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Header P=.4±.5 A±.2 B±.8 Vacuum pick up area : C± ± ±.2.15± ±.15 BRecommended PCB layout Part No. HRS No. No. of Contacts A B C RoHS DF4C-1DP-.4V(51) CL DF4C-12DP-.4V(51) CL DF4C-2DP-.4V(51) CL DF4C-24DP-.4V(51) CL DF4C-3DP-.4V(51) CL DF4C-34DP-.4V(51) CL DF4C-4DP-.4V(51) CL DF4C-44DP-.4V(51) CL DF4C-5DP-.4V(51) CL DF4C-6DP-.4V(51) CL DF4C-7DP-.4V(51) CL DF4C-8DP-.4V(51) CL DF4C-9DP-.4V(51) CL DF4C-1DP-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) There are no concave parts on the header side contact part to increase the mating strength for 6 pos. or above. (Note 3) Use the contacts at the four corners as metal fi ttings. Do not use them as signal or power contacts. (Note 4) The surface of the 9 pos and higher parts have a small, concave section that will not affect the vacuum pick up operation (Note 5) This connector is NOT polarized. 1
11 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Header (For use with shielded product) P=.4.5 A.3 D.1 E.8 Vacuum pick up area: G± P=.4.2 D.5 E.5 B.2 F.5 C BRecommended PCB layout Part No. HRS No. No. of Contacts A B C D E F G RoHS DF4GB-3DP-.4V(51) CL DF4GB-48DP-.4V(51) CL DF4GB-7DP-.4V(51) CL (Note 1) Please place orders by full reel (Note 2) There are no concave parts of header side contact part to increase the mating strength for 6 pos. or above. (Note 3) This connector is NOT polarized. 11
12 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 86 compliant) Receptacle (Stacking height 1.5 mm) Reel Condition Dimensions Ø ±.1 4±.1 F 1.75±.1 F-F Product label Ø21±.8 2±.5 Ø13±.2 Ø1.5 holes for feed mechanism A B±.1 A±.3 C± Ø38±2 Ø8±1 A G G E±.5 D±1.2±.5 8±.1 H H R F G-G 1.65±.15.3±.1 Unreeling Direction R Stacking height 1.5 mm Part No. A B C D E DF4C-1DS-.4V(51) DF4C-12DS-.4V(51) DF4C-2DS-.4V(51) DF4C-24DS-.4V(51) DF4C-3DS-.4V(51) DF4C-34DS-.4V(51) DF4C-4DS-.4V(51) DF4C-5DS-.4V(51) DF4C-6DS-.4V(51) DF4C-7DS-.4V(51) DF4C-8DS-.4V(51) DF4C-9DS-.4V(51) DF4C-1DS-.4V(51) DF4GB(1.5)-3DS-.4V(51) DF4GB(1.5)-48DS-.4V(51) (Note 1) For 1-6 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 7 contacts and above has two rows of holes. 12
13 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 86 compliant) Receptacle (Stacking height 2. mm to 2.5 mm) Reel Dimensions Ø ±.1 4±.1 H 1.75±.1 H-H Product label Ø21±.8 2±.5 Ø13±.2 Ø1.5 holes for feed mechanism B±.1 A±.3 C± Ø38±2 Ø8±1 G G E±.5 D±1 8±.1 J H.3±.1.2±.5 J R G-G Unreeling Direction F±.15 R Stacking height 2. mm Part No. A B C D E F DF4C(2.)-12DS-.4V(51) DF4C(2.)-2DS-.4V(51) DF4C(2.)-24DS-.4V(51) DF4C(2.)-3DS-.4V(51) DF4C(2.)-4DS-.4V(51) DF4C(2.)-5DS-.4V(51) DF4C(2.)-6DS-.4V(51) DF4C(2.)-7DS-.4V(51) DF4C(2.)-8DS-.4V(51) Stacking height 2.5 mm Part No. A B C D E F DF4HC(2.5)-1DS-.4V(51) DF4HC(2.5)-2DS-.4V(51) DF4HC(2.5)-4DS-.4V(51) DF4HC(2.5)-5DS-.4V(51) DF4HC(2.5)-6DS-.4V(51) (Note 1) For 1-6 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 7 contacts and above has two rows of holes. 13
14 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 86 compliant) Receptacle (Stacking height 3. mm to 4. mm) Reel Condition Dimensions Ø ±.1 2±.1 H 1.75±.1 H-H Product label Ø21±.8 2±.5 Ø13±.2 Ø1.5 holes for feed mechanism B±.1 A±.3 C± Ø38±2 Ø8±1 G G E±.5 D±1 8±.1 J H.4±.1.2±.5 J R G-G F±.15 Unreeling Direction R Stacking height 3. mm Part No. A B DF4HC(3.)-3DS-.4V(51) DF4HC(3.)-44DS-.4V(51) DF4HC(3.)-5DS-.4V(51) DF4HC(3.)-6DS-.4V(51) DF4HC(3.)-7DS-.4V(51) DF4HC(3.)-8DS-.4V(51) DF4HC(3.)-9DS-.4V(51) DF4HC(3.)-1DS-.4V(51) DF4GB(3.)-48DS-.4V(51) DF4GB(3.)-7DS-.4V(51) Stacking height 3.5 mm Part No. A B DF4HC(3.5)-2DS-.4V(51) DF4HC(3.5)-3DS-.4V(51) DF4HC(3.5)-5DS-.4V(51) DF4HC(3.5)-6DS-.4V(51) Stacking height 4. mm Part No. A B DF4HC(4.)-4DS-.4V(51) DF4HC(4.)-5DS-.4V(51) DF4HC(4.)-6DS-.4V(51) DF4HC(4.)-8DS-.4V(51) DF4HC(4.)-9DS-.4V(51) (Note 1) For 1-6 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 7 contacts and above has two rows of holes. 14
15 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors Header Reel Dimensions Ø ±.1 4±.1 F 1.75±.1 F-F Product label Ø21±.8 2±.5 Ø13±.2 Ø1.5 holes for feed mechanism A B±.1 A±.3 C± Ø38±2 Ø8±1 G A G E±.5 D±1 H F.3±.1.2±.5 H Ø G-G 1.34±.15 Unreeling Direction Ø Part No. A B C D E DF4C-1DP-.4V(51) DF4C-12DP-.4V(51) DF4C-2DP-.4V(51) DF4C-24DP-.4V(51) DF4C-3DP-.4V(51) DF4C-34DP-.4V(51) DF4C-4DP-.4V(51) DF4C-44DP-.4V(51) DF4C-5DP-.4V(51) DF4C-6DP-.4V(51) DF4C-7DP-.4V(51) DF4C-8DP-.4V(51) DF4C-9DP-.4V(51) DF4C-1DP-.4V(51) DF4GB-3DP-.4V(51) DF4GB-48DP-.4V(51) DF4GB-7DP-.4V(51) (Note 1) For 1-6 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 7 contacts and above has two rows of holes. 15
16 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BOperating Precautions 1. Recommended Solder Profile Temperature (ç) 25 25ç 2 18ç 22ç 6 seconds or below 15 15ç 1 9 to 12 seconds 5 Normal temperature Heating time (sec.) Conditions 1. Peak temperature Maximum of 25ç 2. Heating part Minimum of 22ç within 6 seconds 3. Preheating part 15 18ç 9 12 seconds 4. Number of times Maximum of 2 cycles (Note 1) The temperature shows PCB surface temperature near the connector lead part Recommended hand solder conditions 3. Recommended screen thickness: Opening ratio (pattern area ratio) 4. Leaning of PCB Soldering iron temperature 34 ±1ç, solder time no more than 3 seconds Thickness:.12 mm Opening ratio: DS side 8% DP side 8% Max.2 mm at the center of connector (using both edges of connector as criteria) 5. Washing Cleaning/washing is not recommended for this connector. Cleaning agents can deteriorate the mechanical operation and the environmental resistance of this connector. 6. Precautions Do not mate or unmate these connectors until they are mounted, failure to follow this precaution can lead to deformation or damage to these connectors. Provide another form of support to the PCB, this connector was not designed to be the main form of support. Mating and unmating with excessive force can cause damage. Do not apply excessive amounts of fl ux as it may cause excess solder and fl ux wicking There may be a slight variance in the color of the molding between production lots, this variance will not affect the performance of the connector. Refer to the next page for the handling precautions when mating and unmating the connectors. If the connector becomes disconnected due to impact, a fall or a counterforce to the FPC, it may be necessary to hold the connector in place with an addition to the device s case or other cushioning material to hold the connector in place. 16
17 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when connector mating DF4*-*DS-.4V DF4*-*DS-.4V Prior to mating, locate the guidance ribs and align the header. Do not apply excess force to the connector during mating. Doing so can lead to contact damage Make sure that the connector is parallel to the other side, it then will drop down slightly. Continue to press it down until it is fully mated while maintaining the angle. Do not apply excessive force as it may damage the contacts. 17
18 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when unmating a connector To unmate this connector, lift evenly across the header, making sure that each side stays parallel to each other. If circumstances prevent the connectors from staying parallel to each other, then one side may be lifted as shown in the diagram. This method is only approved if the connector is mounted onto an extremely rigid circuit board. If the board were to warp during this process it may result in damage to the connector or its solder joints. Pitch direction Corner direction Do not try to disconnect these connectors by pulling on one side or a corner, or unmate it while it is securely mounted onto a rigid FPC. These actions may lead to deformities and ultimately a damaged connector. As shown in the figure to the left, do not unmate it from the width direction (front to back), it may damage contacts. Width direction 18
19 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when unmating a connector The contact may peel away if there is not enough rigidity in FPC. Receptacle FPC When mounting the receptacle side to FPC which does not have enough rigidity, the contact may peel away soldered connection. Header We recommended to mount the header side to the FPC. Header FPC We have conducted evaluations on the requirements needed for FPC rigidity. If you need to mount the receptacle to the FPC, contact your local Hirose Rep for this data. Receptacle Even when mounting the header side to FPC, if the rigidity of FPC is low, the connector may break as shown in the left fi gure. Please check the strength and durability of FPC before using. For the evaluation results of each item and FPC rigidity, please contact us. 19
20 DF4 Series.4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 3255 Scott Boulevard, Building 7, Suite 11 Santa Clara, CA 9554 Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) Professional Center Drive, Suite #1C Livonia, MI Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 111 CC Amsterdam Z-O Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse 4 D-7376 Ostfildern (Scharnhauser Park) Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC EUROPE B.V. UK Branch 22 Vincent Avenue, Crownhill Business Centre, Crownhill, Milton Keynes, MK8 AB Phone : Fax : CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. 161,Henderson Metropolitan,NO.3,East Nanjing Road,Huangpu District, Shanghai,China 21 Phone : Fax : CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch A11, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 125 Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 9-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 52, ShenNanDong Road, ShenZhen City, Guangdong Province, 5188 Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 11, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 13 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 1 Anson Road #26-1 International Plaza 7993 Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-1-7, Penang Cybercity (1164),Lintang Mayang Pasir 3,1195, Bayan Baru, Penang, Malaysia. Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office Unit No.3, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 5666 Karnataka, India Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office Suite No. 66 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 2131 Uttar Pradesh-India Phone : Fax : ,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/213. Contents are subject to change without notice for the purpose of improvements.
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
Plastic-Shelled Waterproof Connectors for Outdoor Use
Plastic-Shelled Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Matching Mark Features 1. Weather-resistant and waterproof connectors for outdoor use Lightweight, outdoor, waterproof connectors
1mm Pitch Connectors for Vertical Connection
1mm Pitch Connectors for Vertical Connection FX5 Series Connecting Height: Low profile FX5_*S2A_DSA FX5_*P_SH Features 1. Header Side : 2 Types Available Two header types are available, low and high profiles.
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
Micro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.
0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors
.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors FH39 Series 3.45mm Depth 1.1mm Features 1. Low-profile.3mm pitch connector with top and bottom contact
Micro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Micro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
Interface RF Connector with Switch
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Applications SS 26 V- R 05 1170
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
Applications SS 11 VL- R 03 550
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 mail@fischerconnectors.ch
PRODUCTS SPECIFICATION
PRODUCTS SPECIFICATION ************************************************************************************** Description : DVI Connector Customer : COMOSS P/N : DV Series Date of Issue : 20-Sep-2002 Version
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
HSD High Speed Data interconnection
HSD High Speed Data interconnection Fast, safe and robust Very high data bit rate up to 5 Gbit/s SSR smart strain relief enables unstressed solder joints Excellent resistance against cross-talk and RF-EMC
ZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
COMPACT POWER RELAY. FTR-P3 Series. For automotive applications 1 POLE-25A (for 12V car battery) FTR-K1 SERIES FEATURES PARTNUMBER INFORMATION
COMPACT POWER RELAY For automotive applications 1 POLE-2A (for 12V car battery) FTR-P3 Series FTR-K1 SERIES FEATURES Compact for high density packaging High contact capacity with proven contact material.
Quick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
How To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
24V DRIVE, FTP-60A SERIES ULTRA HIGH SPEED (250mm/s) 3" TYPE MECHANISM (with cutter option) FTP-63AMCL001/011/401/411-R
24V DRIVE, FTP-60A SERIES ULTRA HIGH SPEED (250mm/s) 3" TYPE MECHANISM (with cutter option) FTP-63AMCL001/011/401/411-R OVERVIEW The FTP-60AMCL Series thermal printer (driven by 24VDC) provides ultra-high
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
ROTARY CODED SWITCHES (SMD)
COPL ELECTRONICS RoHS compliant INTERNL STRUCTURE ETURES soldering Low profile of. mm Wide variety (top or side setting,, or positions, J-hook, gull wing or throuhg hole pins) to choose from Compatible
Secure Data Drive Safe storage of sensitive data in harsh environments
Secure Data Drive Safe storage of sensitive data in harsh environments www.fischerconnectors.com FISCHER RUGGED FLASH DRIVE KEY FEATURES SAFE STORAGE IP68 sealed even unmated Extreme temperature resistant
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
Radiant Temperature Sensor TY7321
AB-5361-U Specifications/Instructions Radiant Temperature TY7321 General TY7321 Radiant Temperature s are designed to measure infrared radiation from perimeter windows and walls and provide a proportional
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
Connectors according to IEC 61076-4-101
Definitions Connectors according to IEC 61076-4-101 The hardmetric connector system ept hm 2.0 was developed and manufactured according to the international standard IEC 61076-4-101. Thus the user can
I-PEX MHF4 Micro Coaxial Connector
PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
Figure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications
This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
Spring Fingers. Features. Benefits. Applications
Spring Fingers Spring fingers (also known as shield fingers, grounding springs, universal ground contacts, or clips) can be used in all types of small printed circuit board applications across all industries.
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
EH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
SPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
Brevis GPS SMD. The A10204 GPS antenna is intended for reception of GPS signals at 1575 MHz.
Brevis GPS SMD Antenna Product Specification 1 Features GPS antenna designed for embedded applications Designed for use with the ground plane extended beneath the antenna Good efficiency to size ratio
Specification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
POWER ROCKER SWITCH UL, CSA, VDE, TÜV, ÖVE, KEMA, SEMKO, NEMKO, DEMKO, FIMKO, SEV UL, CSA, VDE, TÜV, SEMKO, NEMKO, DEMKO, FIMKO, SEV, KEMA, ÖVE
POWER ROCKER SWITCH SWITCHES AJ8 switch standard actuator AJ8 switch Wide actuator RoHS Directive compatibility information http://www.nais-e.com/ FEATURES 1. Power rocker switches for safety requirements.
Rufa 2.4 GHz SMD Antenna Part No. 3030A5839 / 3030A5887 Product Specification
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11b/g), ZigBee, etc. Easy to integrate Low profile design for use with no ground beneath the antenna High efficiency
Fusca 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11a/b/g/n), ZigBee, etc. as well as 2.3 GHz WiMAX, 2.5 GHz WiMAX and WiBro. Easy to integrate Low profile design
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
CIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED...
CIN::APSE COMPRESSION TECHNOLOGY E N A B L I N G T E C H N O L O G Y F O R T H E M O S T D E M A N D I N G I N T E R C O N N E C T A P P L I C AT I O N S GET CONNECTED... CIN::APSE It takes more than an
COMPACT POWER TWIN RELAY
FTR-K1 SERIES COMPACT POWER TWIN RELAY 1 POLE x 2-25A, H-Bridge (for automotive applications) FTR-P4 Series FEATURES Compact for high density packaging High contact capacity with proven contact material
Connectors. product overview. Edition 3
Connectors product overview Edition 3 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
2 POLES - 5A LOW PROFILE TYPE
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
Quick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
EUROCARD CONNECTORS PER DIN 41612 AND IEC 60603-2
EUROCARD CONNECTORS PER DIN 41612 AND IEC 60603-2 Quick Reference Guide TE Connectivity s (TE) Eurocard connectors incorporate internationally accepted design advantages of DIN 41612 and IEC 60603-2 two-piece
Amphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial
Amphenol Sincere Health Care Aerospace Heavy Equipment HEV Industrial Electronic Integration & Flexible Printed Circuits About Amphenol The second largest manufacturers of interconnect products 87 worldwide
RI-80 SMD Series Dry Reed Switch
formerly RI-80 SMD Series Dry Reed Switch RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally open contacts,
DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
Outside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
MINIATURE SURFACE MOUNT RELAY
FTR-K1 SERIES MINIATURE SURFACE MOUNT RELAY 1 POLE - 25A (For Automotive Applications) FTR-P6 Series FEATURES Surface mount relays for automotive applications Miniature size (67% of the volume of FTR-P3
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
1 POLE - 8A Medium Load Control
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting