Applications SS 11 VL- R

Transcription

1 AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke Benefits Wide variety of sizes and specifications Super low profile: 20.5 mm maximum Inductances up to 82 mh Rated Currents up to A DC Resistances as low as 0.0 Ω Part Number System SS VL- R Series Core Size (mm) Core Orientation Core Type Rated Current (A) Minimum Inductance (mh) SS =.0 VL- = Vertical Blank = Standard R = High permeability 0x = 0.x A (e.g., 0 = 0. A) xx = x.x A (e.g., =. A) xx0 = xx mh (e.g., 550 = 55 mh) 0xx = x.x mh (e.g., 024 = 2.4 mh) One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205

2 AC Line Filters SS Coils, SSVL High Frequency Type Dimensions Millimeters Marking ø0.8 ±0. ± ±.0 0 ± ± ±.0.5 ±.0 N N2 0 Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. Table Ratings & Part Number Reference Part Number Rated Current AC (A) Inductance (mh) Minimum DC Resistance/ Line (Ω) Maximum Temperature Rise (K) Maximum Marking Weight (g) Approximate SSVL Lot No. 0.5 SSVL Lot No. 0.7 SSVL Lot No. 0.5 SSVL Lot No.. SSVL Lot No. 0.8 SSVL Lot No. 9.8 SSVL Lot No.. SSVL Lot No. 0.7 SSVL Lot No. 0.5 SSVL Lot No. 0.8 SSVL Lot No. 0.4 SSVL Lot No. 9. SSVL-R R0 Lot No. 0.5 SSVL-R R04 Lot No. 0.7 SSVL-R R05 Lot No. 0.5 SSVL-R R0 Lot No.. SSVL-R R07 Lot No. 0.8 SSVL-R R08 Lot No. 9.8 SSVL-R R0 Lot No.. SSVL-R R Lot No. 0.7 SSVL-R R Lot No. 0.5 SSVL-R R7 Lot No. 0.8 SSVL-R R22 Lot No. 0.4 SSVL-R R0 Lot No. 9. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205 2

3 AC Line Filters SS Coils, SSVL High Frequency Type Specifications Item Rated Voltage Withstanding Voltage Insulation Resistance Thermal Class Operating Temperature Range Inductance Measurement Condition SSVL 250 VAC 2400 VAC (2 seconds, between lines) > VDC (between lines) E (20 C) -25ºC to T (T = 20 - temperature rise) khz, V, KC50 Common mode Frequency Characteristics Frequency characteristic M K K K K 0K 00K M 0M 0M M 00K K 0720 K K 0K 00K M 0M 0M M 00K K 05 K K 0K 00K M 0M 0M M 00K R0820 0K R04520 K R R K 0K 00K M 0M 0M M 00K R0825 R0790 0K K R R07 0 K 0K 00K M 0M 0M M 00K R70 0K R052 K 00 R R0009 K 0K 00K M 0M 0M KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205

4 AC Line Filters SS Coils, SSVL High Frequency Type Notes on Use Shelf Life Use within months. If the product is used after a storage period of months or longer, confirm its solderability before use. Storage Condition Avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. Avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. Avoid storage near strong magnetic field, as such condition may magnetize the product. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205 4

5 AC Line Filters SS Coils, SSVL High Frequency Type KEMET Corporation World Headquarters 285 KEMET Way Simpsonville, SC 298 Mailing Address: P.O. Box 5928 Greenville, SC Tel: Fax: Corporate Offices Fort Lauderdale, FL Tel: North America Northeast Wilmington, MA Tel: Southeast Lake Mary, FL Tel: Central Novi, MI Tel: Irving, TX Tel: West Milpitas, CA Tel: Mexico Guadalajara, Jalisco Tel: Europe Southern Europe Sasso Marconi, Italy Tel: Skopje, Macedonia Tel: Central Europe Landsberg, Germany Tel: Kamen, Germany Tel: Northern Europe Wyboston, United Kingdom Tel: Espoo, Finland Tel: Asia Northeast Asia Hong Kong Tel: Shenzhen, China Tel: Beijing, China Tel: Shanghai, China Tel: Seoul, South Korea Tel: Taipei, Taiwan Tel: Southeast Asia Singapore Tel: Penang, Malaysia Tel: Bangalore, India Tel: Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205 5

6 AC Line Filters SS Coils, SSVL High Frequency Type Disclaimer This product has been made available through a Private Label Agreement and a Development and Cross-Licensing Agreement between KEMET and NEC TOKIN to expand market and product offerings for both companies and their respective customers. For more information, please visit All product specifi cations, statements, information and data (collectively, the Information ) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation s ( KEMET ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEMET specifi cally disclaims any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 290 (84) LF0022_SSVL 8/7/205