JCUT-3030/6090/1212/1218/1325/1530

Size: px
Start display at page:

Download "JCUT-3030/6090/1212/1218/1325/1530"

Transcription

1 JCUT CNC ROUTER/CNC WOODWORKING MACHINE JCUT-3030/6090/1212/1218/1325/1530 RZNC-0501 Users Guide Chapter I Characteristic 1. Totally independent from PC platform; 2. Directly read files from U Disk; 3. Easily process G code or PLT file with super size; 4. Strong system and process file examining function; 5. Easy to update system program; 6. It supports high micro step which makes precise and fast process possible; 7. Support to process part of the file; 8. Reliable data protection and recover function; 9. Friendly operating interface

2 Chapter II Cautions 1. Don t use this product in strong magnetic filed or interfere environments; 2. Don t PnP U Disk while it is running a file; 3. Protect it from water, moist, dust and fire: 4. Protect it from metal materials getting into the cover; 5. Forbad to open the cover, there is no any user maintainable parts inside; 6. Plug U Disk and other lines gentle

3 Chapter III Application of Host Progam 1. Host Program Setup Host program are on the CD which include: USB drive, ZHBUSBHandHost.exe,Manual, label file, menu file, Initial program and normal program. 1.Hardware requirements: Main-board: PIII 450; OS: Win2000 or XP 2.Host Program Setup 1) Insert CD into computer driver, and copy all files in the CD and save them in a pointed folder in computer, such as: C:\RZNC-0501 Host Program; 2)Connect the Controller to the computer with USB cable; 3)It shows: Find new hardware on the right bottom on the window as View 3-1, click on the clue; View 3-1 2)It appears setup information, select the second item, which is setup from list or special location, then click on Next button ( as View 3-2); View 3-2 3)Choose include this location in the search then click on Browse

4 icon, then find the location,such as: C:\RZNC-0501 Host Program, and click on Next button to begin to setup ( as View 3-3); View View 3-3-2

5 View )It begins to setup driver program, click on Continue Anyway when it clews The program does not pass Microsoft Logo testing to verify its capability with Windows XP.,(as View 3-4); View 3-4 7)It clews setup finished, click on Finished, (as View 3-5); View View 3-5-2

6 Chapter IV Application of Controller Controller is the motion control system which changes motion data into related electric signals then control the movements of the axes. Controller adopts panel and U Disk to get files, which makes it is easy to control. 一 ) Buttons function and operating means Buttons on panel are as follows: (View 4-1) 图 Function Button Function Positive movement of Z axis, Menu upward, figure 1 inputting Positive movement of Y axis, accelerate process speed, figure 2 inputting, different property selecting in Menu Positive movement of Z axis, figure 3 inputting, rise spindle speed in process Working origin of X axis and Y axis setting, figure 4 inputting Negative movement of X axis; Menu downward, figure 5 inputting Negative movement of Y axis; slowdown process speed; figure 6 inputting different property selecting in Menu Negative movement of Z axis, figure 7 inputting, spindle speed adjusting in process Z axis origin setting ; figure 8 inputting

7 Axes home to machine tool origin, figure 9 inputting Manual moving mode, high speed or low speed selection, figure 0 inputting Spindle startup/stop, decimal point inputting Menu setting entering, negative symbol inputting, multi process state checking, All axes go working origin: confirm of motions /inputting/operating Manual move, continue, step and distance modes selection Cut process running/pause/inputted words delete High/low speed parameter adjust, Cut process stop/selections, inputting and operating cancel compound buttons There are some compound buttons for special applications. The operating mode is: press the first button and hold then press the second button, release the two buttons at same time. Their functions are as following: 1. + digit button, switch working coordinate; 2. + button, C.A.D function; 3. +digit button,stop point process; 4. + button, advanced process; 5. +,help information; Operating Means If it is single button, press the needed button till the wanted function works then release it; if they are compound buttons, press the first button and then the second one and release both at the same time. II) Home Operating Home is the machinery origin, Goto home operating refers to make all axes go back machinery origin. Home position depends on home sensor. Normally there are 3 sensors in an engraving machine. Goto home operating sets up the relationship between the machine and the working coordinates. And many system function

8 applications rely on this operating, such as: stop point save, power off reboot and so on Goto home settings Goto home parameter include Home Speed and Home Direction; and those parameter should be adjusted in Menu. Home Speed refers to that 3 axes home speed, normally Z axis home speed should be lower than that of X and Y axes. Home Direction refers to which direction the axes go when it is under home process. It depends on the motor direction and Home sensor s location and sensor s property. Entering Menu, cursor is on Machine Setup item, press b u t t o n, pr e s s mo v e th e cu r s o r to Ho m e Se t u p it e m, re p r e s s bu t t o n to en t e r it, th e cu r s o r is on Ho m e Sp e e d it e m au t o m a t i c a l l y, pr e s s to en t e r an d se t 3 ax e s sp e e d, de t a i l e d as fo l l o w i n g : Home Speedmm/min X Axis: Y Axis: Z Axis: 图 4-1 Input the value in cursor. If it inputted wrong number, press t o d e l e t e t h e pr e v i o u s nu m b e r an d th e n re p r e s s th e ri g h t on e s. A ft e r ha v i n g fi n i s h e d th e in p u t, pr e s s to co n f i r m an d sa v e th e ne w sp e e d fo r X ax i s. T he Cu r s o r mo v e s to th e Y ax i s sp e e d it e m au t o m a t i c a l l y, if it is un n e c e s s a r y to ch a n g e th e va l u e, pr e s s to mo v e to th e Z ax i s sp e e d it e m. If it is ne c e s s a r y to ch a n g e th e sp e e d, th e sa m e op e r a t i n g wi t h X ax i s. Wh e n yo u fi n i s h al l se t t i n g s, it wi l l go to fo r m e r me n u. Pr e s s to mo v e th e cu r s o r to H o m e D i r e c t i o n it e m, pr e s s

9 to en t e r th e se t t i n g, it di s p l a y s as fo l l o w i n g : Set Home Direction X Axis: -Dir Y Axis: Z Axis: -Dir +Dir 图 4-2 Th e cu r s o r is on X ax i s ho m e di r e c t i o n it e m au t o m a t i c a l l y, pr e s s an d to ch a n g e th e cu r r e n t se t t i n g, pr e s s to mo v e th e cu r s o r to ne x t li n e. P re s s to co n f i r m an d sa v e th e ch a n g e s an d it go e s ba c k th e fo r m e r me n u, pr e s s to gi v e up th e ch a n g e s an d go e s ba c k th e fo r m e r me n u Ho m e op e r a t i o n mo d e s There are several home operation modes as follows: 1) When it has been supplied power, it appears on the screen: Goto Home?, actually it is a question which needs your answer, press m e a n s Y e s, th e n Z ax i s mo v e s fi r s t, Wh e n Z ax i s ar r i v e s it s ho m e, th e n X an d Y mo v e. Pr e s s me a n s No, 3 ax e s do no t mo v e to th e i r ho m e s. Pr e s s an y ot h e r bu t t o n s, on l y Z ax i s go e s to ho m e, X an d Y do n t go ho m e ; 2) When it is in Manual state, press an d 3 ax e s wi l l go ho m e ; Wh e n it is go i n g ho m e, pr e s s bu t t o n to st o p th e op e r a t i o n M e n u S e t u p E n t e r i n g Wh e n it ha s fi n i s h e d ho m e op e r a t i n g, it is in Ma n u a l st a t e, it ap p e a r s as fo l l o w i n g : 1X MANL 1Y F0 1Z Low Continuous

10 Vi e w 4-3 Pr e s s to en t e r th e me n u, th e r e ar e 5 pa r a m e t e r s in Me n u. I t ap p e a r s as fo l l o w i n g : MACHINE SETUP AUTO PRO SETUP SYSTEM SETUP ADVANCED PRO SETUP VERSION VIEW V ie w M a c h i n e Se t u p Ma c h i n e se t u p pa r a m e t e r sh o u l d co n n e c t to th e en g r a v i n g ma c h i n e ha r d w a r e, su c h as : dr i v e r s, I/ O te r m i n a l s. I f th e s e pa r a m e t e r s ar e wr o n g, th e n it le a d s to wr o n g mo t i o n s, ev e n da m a g e to th e ma c h i n e an d op e r a t o r s. S o we st r o n g l y co m m e n d us e r s do n t ch a n g e th e s e it e m s, if it is ne c e s s a r y to ch a n g e th e m, pl e a s e tu r n to au t h o r i z e d ex p e r t s. Pulse Equiv Equivalent,Pulse/mm X Axis: Y Axis: Z Axis: MACHINE SETUP Motor Direction X Axis:-Dir Y Axis:-Dir Z Axis:-Dir Machine Size,mm X Axis: Y Axis: Z Axis:

11 Table Size Motor Dir Home Setup Spindle Setup Voltage Setup Output Pulse Spindle states Lines State Least Pulse Width Pulse Volt Display Pulse Home Speed Home Direction Input Volt Output Volt P u l s e Eq u i v a l e n t Pu l s e Eq u i v a l e n t me a n s th e pu l s e nu m b e r wh e n th e ax i s mo v e s 1m m. It s un i t is : pu l s e / m m. Pu l s e Eq u i v a l e n t = ( 36 0 d e g r e e / S t e p an g e l ) *M i r c o s t e p / S c r e w W he n it is in Pu l s e Eq u i v a l e n t it e m, th e cu r s o r is on X ax i s va l u e, if it is ne c e s s a r y to ch a n g e it, in p u t th e va l u e di r e c t l y, th e n pr e s s to sa v e th e ne w va l u e, th e cu r s o r mo v e s to th e ne x t li n e ti l l it go e s ba c k th e fo r m e r me n u. I f it do e s no t ne e d to ch a n g e, pr e s s to ex i t an d go ba c k fo r m e r me n u. an d bu t t o n s ar e in va l u e st a t e, pr e s s i n g th e m ca n no t mo v e th e cu r s o r. I f t h e p u l s e e q u i v a l e n t i n t h e co n t r o l l e r i s d i f f e r e n t f r o m t h a t o f t h e e n g r a v i n g m a c h i n e. T h e p r o c e s s e d f i l e s i z e i s d i f f e r e n t f r o m t h e o n e y o u s e t T a b l e S i z e Ta b l e si z e re f e r s to th e va l i d mo t i o n si z e of 3 ax e s. Be c a u s e th e sy s t e m ap p l i e s th e ta b l e si z e as th e so f t li m i t, yo u sh o u l d se t th e ta b l e si z e ju s t as th e nu m b e r it re a l l y is. O th e r w i s e it

12 wi l l sh o w : Ov e r th e li m i t or it sl a s h th e be a m. wh e n it is in Ta b l e Si z e it e m, th e cu r s o r is on X ax i s va l u e, if it is ne c e s s a r y to ch a n g e it, in p u t th e va l u e di r e c t l y, th e n pr e s s to sa v e th e ne w va l u e, th e cu r s o r mo v e s to th e ne x t li n e ti l l it go e s ba c k th e fo r m e r me n u. I f it do e s no t ne e d to ch a n g e, pr e s s to ex i t an d go ba c k fo r m e r me n u. an d bu t t o n s ar e in va l u e st a t e, pr e s s i n g th e m ca n no t mo v e th e cu r s o r. If th e fi l e ex c e e d s th e ta b l e si z e, th e sy s t e m wi l l al e r t wh e n it ch e c k th e da t a. T he n yo u mu s t ch a n g e yo u r fi l e si z e or op e r a t e it in an ot h e r en g r a v i n g ma c h i n e wi t h bi g g e r ta b l e si z e Mo t o r Di r e c t i o n Mo t o r di r e c t i o n ch a n g e s th e mo t o r mo v i n g di r e c t i o n. T hi s se t t i n g af f e c t al l mo t i o n di r e c t i o n of 3 ax e s. S o af t e r ch a n g i n g th i s it e m, yo u mu s t ch a n g e ot h e r di r e c t i o n se t t i n g s. wh e n it is in Mo t o r di r e c t i o n it e m, th e cu r s o r is on X ax i s di r e c t i o n, if it is ne c e s s a r y to ch a n g e it, pr e s s or to ch a n g e pr o p e r t y th e n pr e s s an d bu t t o n s to mo v e th e cu r s o r to ne x t li n e. I f it do e s no t ne e d to ch a n g e, pr e s s to ex i t an d go ba c k fo r m e r me n u H o m e S e t u p ( De t a i l s ar e in ) S p i n d l e Se t u p Th e sy s t e m of f e r s th e sp i n d l e co n t r o l fu n c t i o n. I f th e co n n e c t i o n bo r a d an d th e co n v e r t e r ha v e be e n co n n e c t e d we l l, th e sp i n d l e sp e e d ca n be ch a n g e d du r i n g pr o c e s s. I t go e s li k e th i s : mo v e cu r s o r to Sp i n d l e Se t u p it e m th e n pr e s s to en t e r. T he n it sh o w s th e va l u e of sp i n d l e st a t e, th e de f a u l t va l u e is 2. if it ne e d s to ch a n g e, in p u t th e va l u e di r e c t l y th e n pr e s s to sa v e. An d it wi l l sh o w th e li n e st a t e. Se t th e li n e s st a t e ac c o r d i n g to th e Co n v e r t e r. M ea n s Mu l t i c a s t OF F st a t e, me a n s ON st a t e, or to ch a n g e pr o p e r t y th e n pr e s s an d bu t t o n s to mo v e th e cu r s o r to ne x t li n e, pr e s s to co n f i r m al l ch a n g e s. I f it do e s no t ne e d to ch a n g e, pr e s s to ex i t an d go ba c k fo r m e r me n u.

13 V o l t a g e Se t u p Vo l t a g e Se t u p re f e r s to th e te r m i n a l s pr o p e r t y, wh i c h is th e I/ O se n s o r s wo r k s at hi g h or lo w vo l t a g e. Do w n ar r o w sy m b o l me a n s it is hi g h vo l t a g e, wh i l e up ar r o w sy m b o l me a n s it is lo w vo l t a g e. I t di v i d e s to tw o pa r t s : in p u t vo l t a g e an d ou t p u t vo l t a g e. In p u t Vo l t a g e : th e fr o n t 4 ar e : X, Y, Z ho m e se n s o r an d C. A. D pr o p e r t y. Pr e s s o r to ch a n g e it s pr o p e r t y, an d pr e s s an d bu t t o n s to mo v e th e cu r s o r to ne x t li n e, pr e s s to co n f i r m al l ch a n g e s. I f it do e s no t ne e d to ch a n g e, pr e s s to ex i t an d go ba c k fo r m e r me n u. I t is th e sa m e op e r a t i n g mo d e to th e ou t p u t Vo l t a g e if it ne e d s to ch a n g e O u t p u t P u l s e Ou t p u t pu l s e re f e r s to pu l s e pa r a m e t e r s, su c h as : Le a s t Pu l s e Wi d t h, Pu l s e vo l t a g e, an d Di s p l a y C. A. D t h i c k n e s s C u t t e r A d j u s t D e v i c e ( C. A. D ) is to se t Z ax i s wo r k i n g or i g i n. U se r s mu s t se t it s th i c k n e s s, ot h e r w i s e th e Z ax i s wo r k i n g or i g i n is no t co r r e c t. I f yo u ha v e us e d th i s fu n c t i o n, yo u ne e d no t to pr e s s to cl e a r. It mu s t ha v e ph y s i c a l co n n e c t i o n be t w e e n th e ma c h i n e an d co n n e c t i o n bo a r d. C. A. D fu n c t i o n pr o c e s s ne e d s co m p o u n d bu t t o n s : + It s op e r a t i n g mo d e go e s li k e th i s : Pr e s s bu t t o n an d th e n, th e n fr e e th e m at th e sa m e ti m e. Th e n Z ax i s go e s do w n sl o w l y, wh e n it re a c h th e Cu t t e r Ad j u s t Sl o t, it wi l l go up. T he n Z ax i s wo r k i n g or i g i n se t S c r e w I n t e r s p a c e s Sc r e w In t e r s p a c e s re f e r s to th e sc r e w of f s e t if it ne e d s. I ts va l u e ca n n o t ex c e e d 1m m. O pe r a t i n g St e p s ar e : mo v e cu r s o r to Sc r e w In t e r s p a c e s it e m, pr e s s to en t e r th e it e m, cu r s o r is on X ax i s va l u e au t o m a t i c a l l y. If it ne e d s to ch a n g e th e va l u e, in p u t th e va l u e by pr e s s i n g re l a t e d bu t t o n s an d th e n pr e s s to sa v e th e ch a n g e s, th e cu r s o r mo v e s to th e ne x t li n e ti l l go e s ba c k fo r m e r me n u. If

14 it do e s no t ne e d to ch a n g e, pr e s s ti l l it go e s ba c k fo r m e r me n u. an d bu t t o n s ar e in va l u e st a t e, pr e s s i n g th e m ca n no t mo v e th e cu r s o r A u t o P r o Se t u p A u t o p r o s e t u p de a l s wi t h ac c e l e r a t i o n an d co d e re a d pr o p e r t i e s. It go e s li k e as fo l l o w i n g : Auto Pro Setup Linear Accl: Unit mm/sec2 600 Curv Accl: Unit mm/sec2 600 G code Read Setup F Read Disable Disable Disp Error Z Height Disable L i n e a r A c c e l e r a t i o n Li n e a r Ac c e l e r a t i o n pr o m o t e s to li n e mo t i o n ab i l i t y. It s de f a u l t va l u e is 60 0 m m / s e q u a e se c o n d. If it ne e d s to ch a n g e th e va l u e, in p u t th e va l u e di r e c t l y an d pr e s s to sa v e. T he n th e cu r s o r mo v e s to th e ne x t li n e ti l l go e s ba c k th e fo r m e r me n u. If it un n e c e s s a r y to ch a n g e it, pr e s s ti l l it go e s ba c k fo r m e r me n u. an d bu t t o n s ar e in va l u e st a t e, pr e s s i n g th e m ca n no t mo v e th e cu r s o r. If th e au t o pr o c e s s sp e e d is le s s th a n 10 m e t e r s / m i n u t e, th e ac c e l e r a t i o n is ab o u t m m / s e c 2 ; if th e sp e e d is mo r e th a n 10 m e t e r s / m i n, yo u sh o u l d ad j u s t th e ac c e l e r a t i o n va l u e C u r v e A c c e l e r a t i o n Cu r v e Ac c e l e r a t i o n pr o m o t e s to cu r v e mo t i o n ab i l i t y. It s de f a u l t va l u e is 60 0 m m / s e q u a e se c o n d. If it ne e d s to ch a n g e th e va l u e, in p u t th e va l u e di r e c t l y an d pr e s s to sa v e. T he n th e cu r s o r mo v e s to th e ne x t li n e ti l l go e s ba c k th e fo r m e r me n u. If it un n e c e s s a r y to ch a n g e it, pr e s s ti l l it go e s ba c k fo r m e r me n u. an d bu t t o n s ar e in va l u e st a t e, pr e s s i n g th e m ca n no t mo v e

15 th e cu r s o r. If th e au t o pr o c e s s sp e e d is le s s th a n 10 m e t e r s / m i n u t e, th e ac c e l e r a t i o n is ab o u t m m / s e c 2 ; if th e sp e e d is mo r e th a n 10 m e t e r s / m i n, yo u sh o u l d ad j u s t th e ac c e l e r a t i o n va l u e G c o d e R e a d S e t u p G c o d e r e a d S e t u p m e a n s re f e r s to th e ru l e s of re a d i n g G co d e fi l e. Be c a u s e th e r e ar e ma n y sp e c i a l co d e da t a. En t e r i n g th e se t t i n g s, th e cu r s o r is on F Re a d Di s a b l e it e m, if it ne e d s to ex e c u t e th e F co d e in th e fi l e, th e n pr e s s or to ch a n g e it s pr o p e r t y, th e n Di s a b l e ch a n g e s in t o En a b l e. Di s a b l e me a n s to ig n o r e th e F co d e wh i l e En a b l e wi l l ex e c u t e th e co d e. T he n mo v e or to mo v e th e cu r s o r to ne x t it e m. Di s p l a y Er r o r re f e r s to di s p l a y th e wr o n g G co d e fi l e, so th a t us e r ca n co r r e c t it. Z he i g h t re f e r s to th e ra i s i n g of Z ax i s wh e n it fi n i s h e s wo r k i n g. En a b l e me a n s th a t Z ax i s ra i s e s to th e se t he i g h t af t e r it fi n i s h e s al l wo r k. Di s a b l e me a n s th a t Z ax i s ra i s e s as th e fi l e as k s. Pr e s s to co n f i r m an d go e s ba c k fo r m e r me n u, wh i l e pr e s s to ca n c e l th e ch a n g e an d go e s ba c k fo r m e r me n u S y s t e m S e t u p S y s t e m S e t u p de a l s wi t h fu n c t i o n co n f i g u r e, fi l e fo r m a t, I/ O ch e c k i n g, bu t t o n s ch e c k an d sy s t e m up d a t e. F u n c t i o n C o n f i g u r e is to se t sy s t e m fu n c t i o n s : su c h as it ne e d s P o w e r O f f p r o t e c t i o n fu n c t i o n or no t, pr e s s me a n s it ne e d s Po w e r of f pr o t e c t i o n, wh i l e me a n s it do e s no t ne e d th i s fu n c t i o n ; d e f a u l t l a n g u a g e, s e t h o m e s w i t c h, En a b l e me a n s th e r e is a ho m e se n s o r fo r th e me n t i o n e d ax i s, pr e s s or to ch a n g e En a b l e to Di s a b l e, wh i c h me a n s th e me n t i o n e d ax i s ge t s no ho m e se n s o r. if th e r e ar e ho m e se n s o r s, G o H o m e T y p e s wh e n th e sy s t e m ge t s po w e r su p p l y in wh i c h mo d e th e sy s t e m wi l l ta k e. Z a x i s v a l u e c h a n g i n g a n d s a v i n g. Em e r g e n t St o p se n s o r, Ha r d li m i t se n s o r s an d so on. P re s s to en t e r an d se l e c t th e di f f e r e n t fu n c t i o n co n f i g u r e ac c o r d i n g to th e cl e w. I n n e r F o r m a t re f e r s to fo r m a t th e fl a s h di s k. Wh e n yo u fi n i s h

16 th e sy s t e m up d a t e, yo u mu s t fo r m a t in n e r fi l e. M ov e th e cu r s o r to In n e r Fo r m a t it e m, an d pr e s s, th e sc r e e n ap p e a r s as fo l l o w i n g : Formatting... 30% V i e w 4-7 wh e n it fi n i s h e d, it ap p e a r s : fo r m a t t e d an d pr e s s to go ba c k fo r m e r me n u. I n p u t S e l f C h e c k re f e r s to th e sy s t e m ch e c k s In p u t te r m i n a l s pr o p e r t i e s. O u t p u t S e l f C h e c k re f e r s to th e sy s t e m ch e c k s Ou t p u t te r m i n a l s pr o p e r t i e s. B u t t o n s C h e c k re f e r s to ch e c k th e bu t t o n s on th e pa n e l. A ft e r en t e r i n g, pr e s s th e bu t t o n s an d th e re l a t e d on e s wi l l sh o w th e cu r s o r. I f yo u wa n t to qu i t, pr e s s co m p o u n d bu t t o n s : + Th e sy s t e m do e s no t su p p o r t No i s e Ch e c k. S y s t e m A u t o U p d a t e if it ne e d s to up d a t e th e sy s t e m, us e r sh o u l d do w n l o a d th e up d a t e fi l e fr o m ou r we b s i t e to U di s k. T he in s e r t th e di s k to th e co n t r o l l e r. M ov e th e cu r s o r to Sy s t e m Au t o Up d a t e it e m, an d pr e s s to ge t in, th e sc r e e n ap p e a r s : Choose file: U Disk flile list Inner file list Vi e w 4-8 C ho o s e U di s k fi l e li s t, pr e s s to ge t in, it di s p l a y al l fi l e s in th e U di s k, mo v e th e cu r s o r to th e do w n l o a d e d up d a t e fi l e, pr e s s to st a r t, th e up d a t e fi l e in f o ap p e a r s on th e sc r e e n, th e us e r mu s t mo v e th e cu r s o r an d re a d al l in f o, th e n re p r e s s to op e r a t e ne x t, th e sc r e e n di s p l a y s as fo l l o w i n g : It is updating Normal program, please wait... 40% It is updating Initinal program, please wait... 40% It is updating Chinese Menu please wait... 40% It is updating English It is updating Chinese It is updating English

17 Th e n pr e s s to co n f i r m up d a t i n g A D V A N C E D P R O S E T U P I t r e f e r s t o s p e c i a l a p p l i c a t i o n s w h i c h i n c l u d e s : M u l t i p l e S e t u p, S t o p S e t u p, F i l e M a i n t e n a n c e, T o o l C h a n g e S e t u p, a n d P a s s w o r d S e t u p M u l t i p l e S e t u p If it ne e d s to ru n a fi l e fo r ma n y ti m e s, th e r e ar e tw o wa y s : on e is to co p y al l fi l e s an d sa v e it as on e fi l e in G co d e ma k i n g so f t w a r e, th e n do w n l o a d it to th e co n t r o l l e r ; th e ot h e r is to ma k e a si n g l e fi l e an d ru n mu l t i p l e fu n c t i o n. Y ou mu s t se t th e mu l t i p l e pa r a m e t e r s, su c h as : ro w nu m b e r, co l u m n nu m b e r, an d th e i r sp a c e, an d pa u s e ti m e. T he n pr e s s co m p o u n d bu t t o n s : +, an d se l e c t Mu t i p l e Pr o c e s s, pr e s s to be g i n to pr o c e s s. Mu l t i p l e Pr o c e s s op e r a t i n g st e p s ar e as fo l l o w i n g : wh e n th e cu r s o r is on th e Mu t i p l e Se t u p, pr e s s, it ap p e a r s on th e sc r e e n : Row Column Row Space Column Pause Time Vi e w 4-9 P re s s to en t e r, th e cu r s o r is on ro w s va l u e. I f it ne e d s to mo d i f y, in p u t th e va l u e di r e c t l y. A nd th e cu r s o r mo v e s to Co l u m n se t t i n g. th e n re p r e s s to sa v e th e ch a n g e an d it go e s ba c k th e fo r m e r me n u. Pr e s s 键 to mo v e th e cu r s o r to Ro w S p a c e Co l u m n S p a c e it e m.

18 T he cu r s o r is on Ro w sp a c e va l u e, I f it ne e d s to mo d i f y, in p u t th e va l u e di r e c t l y. A nd th e cu r s o r mo v e s to Co l u m n se t t i n g. th e n re p r e s s to sa v e th e ch a n g e an d it go e s ba c k th e fo r m e r me n u. S p a c e h e r e m e a n s t h e t w o c e n t e r d i s t a n c e. Pr e s s to mo v e th e cu r s o r to Pa u s e Ti m e it e m, pr e s s to en t e r. Pa u s e ti m e re f e r s th e pa u s e ti m e wh e n it fi n i s h on e wo r k. I np u t th e va l u e di r e c t l y. Re p r e s s to sa v e th e ch a n g e an d it go e s ba c k th e fo r m e r me n u. I f it do e s no t to mo d i f y, pr e s s to qu i t an d go e s ba c k fo r m e r me n u. I f yo u in p u t a ne g a t i v e nu m b e r, wh e n it fi n i s h a wo r k, it ne e d s to pr e s s an y bu t t o n th e n it be g i n to wo r k S t o p S e t u p S t o p S e t u p re f e r s to th e po s i t i o n 3 ax e s mo v e to wh e n it fi n i s h e s th e pr o c e s s. I t in c l u d e s : St o p St a t u e an d St o p Po s i t i o n. If yo u se l e c t Go St o p Po s i t i o n, yo u mu s t se t st o p po s i t i o n. P re s s to en t e r se t t i n g s, th e cu r s o r is on St o p st a t u e it e m, re p r e s s, an d th e sc r e e n di s p l a y s : Auto motion: Go Origin Z up then Stop Go Stop Postin Hold on 图 Pr e s s an d to mo v e th e cu r s o r to wa n t e d it e m, re p r e s s to se l e c t an d go e s ba c k fo r m e r me n u. G o O r i g i n re f e r s Z ax i s go e s to it s hi g h e s t po s i t i o n, X an d Y ax e s go ba c k wo r k i n g co o r d i n a t e or i g i n. Z u p t h e n S t o p re f e r s th a t Z ax i s go e s to it s hi g h e s t po s i t i o n, wh i l e X an d Y ax e s do no t mo v e. G o S t o p P o s i t i o n re f e r s th a t 3 ax e s go to th e se t po s i t i o n. H o l d o n re f e r s th a t 3 ax e s st o p at th e fi n i s h e d po s i t i o n. S t o p P o s i t i o n : af t e r se l e c t th e it e m, pr e s s an y bu t t o n to en t e r se t t i n g ac c o r d i n g to th e sc r e e n in f o : 1X SPOT 1Y SOFF

19 Vi e w M ov e th e 3 ax e s to th e ri g h t po s i t i o n, wh e n th e mo v i n g st o p s, th e Sp o t an d st o p sw i t c h fa s t, an d th e po s i t i o n is th e st o p po s i t i o n. I f it ne e d s to mo d i f y, yo u ca n mo v e th e 3 ax e s, an d th e la s t on e is th e st o p po s i t i o n. Pr e s s to sa v e ch a n g e an d go ba c k fo r m e r me n u. P re s s to ca n c e l th e se t t i n g an d go ba c k fo r m e r me n u. St o p po s i t i o n is Ma c h i n e r y co o r d i n a t e po s i t i o n an d ha s no t h i n g to do wi t h wo r k i n g co o r d i n a t e F i l e M a i n t e n a n c e F i l e i n c l u d e s : U d i s k f i l e a n d In n e r f i l e. U di s k fi l e re f e r s to fi l e s sa v e d in U di s k. T he co n t r o l l e r ca n ru n th e fi l e vi a U di s k te r m i n a l. In n e r fi l e re f e r s to fi l e s sa v e d in co n t r o l l e r. Fi l e ma i n t e n a n c e me a n s to Vi e w fi l e, Co p y fi l e an d De l e t e Fi l e. V i e w f i l e : pr e s s to en t e r. P re s s an d to mo v e cu r s o r to ta r g e t fi l e, th e sc r e e n di s p l a y th e fi l e li n e Nu m b e r an d co n t e n t s. pr e s s an d to ch a n g e li n e nu m b e r an d co n t e n t s. P re s s to go to fi r s t li n e wh i l e to th e la s t li n e. Pr e s s to qu i t vi e w. C o p y f i l e : it ca n co p y an d sa v e U di s k fi l e or in n e r fi l e to in n e r fi l e. P re s s an d to mo v e cu r s o r. I t wi l l go e s ba c k fo r m e r me n u af t e r co p y i n g. D e l e t e f i l e : it ca n de l e t e ta r g e t fi l e. Th e de l e t e d fi l e ca n no t be re c o v e r e d, so ma k e su r e wh e t h e r yo u wa n t to de l e t e it or no t. F ir s t, yo u sh o u l d se l e c t fi l e ty p e s, th e mo v e th e cu r s o r to th e ta r g e t fi l e. T he n pr e s s to de l e t e. I t wi l l go e s ba c k fo r m e r me n u af t e r th e fi l e be i n g de l e t e d T o o l C h a n g e S e t u p

20 If it ne e d s to ch a n g e to o l s du r i n g pr o c e s s, yo u mu s t se t to o l ch a n g e se t u p fi r s t l y. T oo l ch a n g e po s i t i o n is ma c h i n e r y co o r d i n a t e po s i t i o n. T o o l C h a n g e P o s i t i o n : Pr e s s to se t ch a n g e po s i t i o n, an d th e sc r e e n sh o w s : 1X SPOT 1Y SOFF 1Z LOW Go Cutter Position Vi e w M ov e th e 3 ax e s to th e ri g h t po s i t i o n, wh e n th e mo v i n g st o p s, th e Sp o t an d st o p sw i t c h fa s t, an d th e po s i t i o n is th e to o l ch a n g e po s i t i o n. I f it ne e d s to mo d i f y, yo u ca n mo v e th e 3 ax e s, an d th e la s t on e is th e ch a n g e po s i t i o n. Pr e s s to sa v e ch a n g e an d go ba c k fo r m e r me n u. P re s s to ca n c e l th e se t t i n g an d go ba c k fo r m e r me n u P a s s w o r d S e t u p Th e sy s t e m do e s no t su p p o r t th i s fu n c t i o n no w V E R S I O N V I E W Ve r s i o n in c l u d e s : In i t i n a l ve r s i o n an d No r m a l ve r s i o n. M ov e cu r s o r to se l e c t, th e n pr e s s to en t e r. pr e s s to qu i t. 4.4 Process Process includes: Manual process, Auto process and Advanced process Manual Process Manual Process refers to control the engraving machine by pressing the buttons on panel. Users can change manual speed and grid. After the machine goes home, the system is in manual process, which shown as below: 1X MANL 1Y SOFF 1Z HIGH Continuous View Manual 1Manual Speed Change and adjust

21 Manual Process speed can change between High speed and Low speed. bu t t o n is th e ke y. If it is in Hi g h sp e e d no w, pr e s s, HI G H on th e sc r e e n ch a n g e s to LO W ; if it is in Lo w sp e e d, pr e s s LO W on th e sc r e e n ch a n g e s to Hi g h. S pe e d st a t u e on th e sc r e e n de c i d e s ma n u a l pr o c e s s sp e e d. S p e e d A d j u s t : In Ma n u a l pr o c e s s st a t u e, pr e s s to se t sp e e d of cu r r e n t sp e e d st a t u e. T he sc r e e n di s p l a y s as be l o w : Low spd, mm/min X Axis: Y Axis: Z Axis: Low grid The cursor is on X speed item, press an d to se l e c t th e ta r g e t it e m. Th e n pr e s s to se t th e va l u e. Af t e r fi n i s h i n g in p u t th e ne w va l u e, pr e s s to sa v e th e va l u e, wh i l e pr e s s to qu i t. I f th e in p u t nu m b e r is no t co r r e c t, pr e s s to de l e t e th e la s t va l u e. Lo w gr i d is th e le a s t fe e d. I ts sc o p e is fr o m m m 1. 0 m m. Wh e n it is in St e p mo d e, 3 ax e s wi l l mo v e as th e gr i d di s t a n c e. T he se t t i n g me a n s of Hi g h sp e e d is th e sa m e to Lo w sp e e d M a u n a l P r o c e s s M o d e s In order to meet different requirements for manual moving, it offers three kinds of manual moving modes, there are Continuous moving mode, Step moving mode and Space moving mode. Users can switch moving modes by pressing in manual state and check the moving mode at bottom of the screen. (1) Continuous moving mode In this mode, users press moving direction buttons (I1, I2, I3, II1, II2 and II3) and machine tool will move as ordered direction till all buttons release. Its speed is determined by current speed mode. Attention: if the pressing time on buttons is too short (less than 0.5 second) and releases the button at once, the machine tool moves to and stops at nearest step point automatically. When this moving mode ends,

22 the machine tool always stops at mesh point. This mode is suitable to adjust position of machine tool. (2) Step moving mode It always moves at low speed with a grid per second. Its step space is determined by current grid of speed statue. This mode is suitable to adjust cut position and machine tool position precisely. (3) Distance moving mode In this mode, users press moving direction buttons ( ) and machine tool moves to ordered location. The machine tool moves according to current speed mode and set spaces. The moving is not influenced by grid and stops precisely at ordered point not at grid point Auto Process Auto Process refers to run U Disk files and Inner files. Sometimes we call it file process. Before running any file, the machine and system parameters should be set correctly. Auto process operating steps are: 1.Set working Origin When it is in manual state, move 3 axes to proper spot where it begins to run file. Then Press to clear X and Y axes working origin; and press 键 to clear Z axis working origin. If the C.D.A function has been applied, it does not need to press to clear Z origin. 2.Choose file:after origins have been set, press, the screen displays as below: Choose file: U Disk file list Inner file list Press an d to mo v e th e cu r s o r an d se l e c t th e fi l e li s t ty p e, pr e s s to en t e r th e se l e c t e d fi l e li s t. It wi l l sh o w th e 1 s t, th e 2 n d, an d th e 3 r d fi l e na m e s on th e sc r e e n. Pr e s s an d to mo v e cu r s o r on e by on e, an d pr e s s an d to ju m p tw o fi l e s ea c h ti m e. pr e s s an d se l e c t ta r g e t fi l e. wh i l e P re s s to qu i t.

23 3. P r o c e s s P a r a m e t e r S e t t i n g s : af t e r pr e s s i n g 键 bu t t o n, it ne e d s to se t pr o c e s s pa r a m e t e r s, su c h as : pr o c e s s sp e e d, tr a v e l sp e e d, Z do w n ra t i o, pr o c e s s sp e e d ra t i o, sp i n d l e sp e e d gr a d, Z up he i g h t. A nd th e sc r e e n di s p l a y as be l o w : Proc Spd Trvl Spd ZDownRat 1.00 Spd Rati 1.00 Spd Grad 1 Equival pulse/mm X Axis: Y Axis: Z Axis: Z up mm press an d to mo v e cu r s o r an d se l e c t di f f e r e n t it e m, pr e s s to mo d i f y th e va l u e. pr e s s to sa v e th e ne w va l u e, th e n mo v e th e cu r s o r to ne x t it e m. Wh e n it fi n i s h e s al l ch a n g e s, pr e s s to co n f i r m, th e sy s t e m be g i n s to ch e c k th e G co d e da t a. It st a r t s to wo r k af t e r al l G co d e da t a be i n g ch e c k e d. P r o c S p d : th e en g r a v i n g ma c h i n e wi l l pr o c e s s th e fi l e at th i s sp e e d wh e n it be g i n s to re l i e v i n g. T r v l S p d : It tr a v e l s at th i s sp e e d wh e n th e ma c h i n e do e s no t re l i e v e. Z D o w n R a t : Z ax i s go e s do w n sp e e d ra t i o. I n or d e r to pr o t e c t th e to o l s ed g e fr o m da m a g e, it ne e d s to ma k e th e z ax i s go e s do w n at a lo w sp e e d. I ts sc o p e is : S p d R a t i : Sp e e d Ra t i o, it ca n re d u c e th e pr o c e s s sp e e d. S o th e re a l pr o c e s s sp e e d is : Pr o c e s s Sp d * Sp d Ra t i o. I ts ra n g e is : S p d G r a d : Sp i n d l e Sp e e d Gr a d. I t me a n s sp i n d l e sp e e d wh e n it be g i n s to wo r k. E q u i v a l e n t : It di s p l a y s 3 ax e s eq u i v a l e n t s. he r e yo u ca n no t ch a n g e th e s e va l u e. I f it ne e d s to mo d i f y, yo u sh o u l d en t e r th e me n u an d se t th e m. Z U p m m : It re f e r s to th e He i g h t th a t Z ax i s ca n go up. If th e

24 fi l e Z ax i s up he i g h t is ov e r th i s li m i t, it wi l l ad o p t th i s va l u e in s t e a d. I t i s t h e s a m e op e r a t i n g s t e p s fo r i n n e r f i l e s. Wh e n it is ru n n i n g th e fi l e, th e sc r e e n ro l l s th e in f o r m a t i o n of fi l e li n e nu m b e r, re a l pr o c e s s sp e e d, sp e e d ra t i o, re m a i n ti m e. pr e s s to st o p ro l l i n g an d ju s t sh o w th e cu r r e n t in f o. re p r e s s to sw i t c h to ne x t in f o. 4. P r o c e s s A d j u s t Wh e n it is ex e c u t i n g th e fi l e, pr e s s a n d t o c h a n g e t h e s p e e d r a t i o, ea c h pr e s s on, ra t i o dr o p s 0. 1 t i l l th e ra t i o is An d sp e e d va l u e ch a n g e s sy n c h r o n i c a l l y ; ea c h pr e s s on, sp e e d ra t i o ra i s e 0. 1 ti l l P r e s s a n d b u t t o n to ad j u s t sp i n d l e sp e e d if yo u ha v e th e ha r d w a r e co n n e c t e d an d go t sp i n d l e se t. Ea c h pr e s s i n g on, th e sp i n d l e sp e e d ra i s e s a gr a d ti l l th e hi g h e s t. Ea c h pr e s s on, th e sp i n d l e sp e e d dr o p s a gr a d ti l l F1. 5. P r o c e s s P a u s e a n d p o s i t i o n a d j u s t When it is processing, press to adjust three axes position, then repress Pause, it clews Original?, press confirms your change and it processes form the new position. While press denies the change and it processes from the original position; 6. P r o c e s s S t o p an d S t o p P o i n t s a v i n g When it is processing, press point. The screen displays as below: stops processing, it clews to save stop 1X RUN 1Y SOFF 1Z LOW Save Stop pt?

25 If it needs to restart process form current position lately, then you should save it and press related digit button to save as, which means save the stop point as NO.1 stop point.(there are 6 stop points totally). Then it displays on the screen as below: 1X RUN 1Y SOFF 1Z LOW Save Stop pt?1 Press to sa v e th e se t t i n g. T he n 3 ax e s go ba c k ho m e or i g i n. If it needs to continue to process from the Stop Point1, press compound buttons: +,it starts process from the stop point. The same operating steps to stop point2, stop point3 and so on. The condition for Stop point process is that the 3 axes must have homed before saving the stop point. 7.Power Off Protection. The system will automatically protect the process data when the power fall down suddenly. When it gets the power supply again, press to go back machine origin, then it clews PowerOff reboot? press to continue to process unfinished work, or to give up A D V A N C E D P R O C E S S A d v a n c e d p r o c e s s i s t h e f u n c t i o n f o r s p e c i a l a p p l i c a t i o n, wh i c h in c l u d e s : Se g m e n t Pr o c e s s, M ul t i p l e Pr o c e s s, Se g m e n t - m u l t i p l e pr o c e s s, Au t o Co p y Pr o c e s s, Mi l l Ta b l e an d To o l s Ch a n g e A d v a n c e d p r o c e s s c a l l Pr e s s co m p o u n d bu t t o n s : +, it di s p l a y s on th e sc r e e n as be l o w : Advanced Process: Segment Process Multiple Process Segment-Multiple Auto Copy Process Mill Table Tools Change

26 Segment 1Segment Process Segment Process refers that user can select the beginning line and ending line to operate. That is we can process part of the file. The operating steps are: 1. Press to enter setting, press an d to mo v e cu r s o r se l e c t fi l e li s t ; 2. Press to enter the file list, press an d to se l e c t th e ta r g e t fi l e ; 3. A c c o r d i n g to th e cl e w, se l e c t be g i n n i n g li n e nu m b e r, th e fi r s t G co d e da t a di s p l a y s on th e sc r e e n. P re s s, it di s p l a y as be l o w : Switch to Line 1 In p u t th e li n e nu m b e r in cu r s o r po s i t i o n. pr e s s to confirm beginning line number. If the value is not correct, press t o m o d i f y ; 4. It di s p l a y s th e G co d e da t a, re p r e s s, it displays as following: Ending line No. Press it cl e w s : Sw i t c h to Li n e. A nd in p u t th e en d i n g li n e nu m b e r in cu r s o r. P re s s to confirm ending line number. If the value is not correct, press to ad j u s t ; P r e s s t o s e l e c t th e 1 s t l i n e a n d t o s e l e c t t h e l a s t l i n e. 5. Th e n se t th e pr o c e s s pa r a m e t e r s, de t a i l s ar e in Au t o

27 Pr o c e s s Multiple Process It needs to set multiple parameters in menu, then call this function here. Operating steps are: 1. press an d to mo v e cu r s o r on mu l t i p l e it e m, pr e s s to enterit, then press or to mo v e cu r s o r to se l e c t fi l e li s t ; 2.press to enter the file list, repress or to mo v e cu r s o r an d se l e c t ta r g e t fi l e ; 3. S e t pr o c e s s pa r a m e t e r s, an d fo l l o w i n g st e p s ar e si m i l a r wi t h th e au t o pr o c e s s. I t wo r k s as it se t. P re s s to vi e w th e mu l t i p l e pa r a m e t e r s, re p r e s s to ca n c e l th e vi e w Segment-multiple 3Segment-multiple Process Segment-multiple Process is to process part of the file for many times. It meets the needs to run part of the file for many times. So it needs to set the segment parameters and multiple parameters first, then call this function here. Its operating steps are the same to multiple process Auto 4Auto Copy Process Because it reads G code from U disk, it needs to check G code data each time. If it is a larger file, the checking will cost time. So if there is some file needs to be processed frequently, we can process this file once and save it for inner file. When next time, it needs to run this file, we can call it easily. Because this function takes a lot flash memory, you d better not to change too much files into Auto Copy Process file. And if you reset the engraving machine and system parameters, you must to reset this operation. Press an d to mo v e cu r s o r on Au t o Co p y Pr o c e s s it e m, pr e s s to enter, repress or to se l e c t fi l e li s t. pr e s s to enter file list, repress an d to se l e c t ta r g e t fi l e. T he n se t pr o c e s s pa r a m e t e r s. T he n pr e s s, it clews: Inner file, that is which file you like to save this file. Then press a n d t o m o v e cu r s o r an d se l e c t fi l e, pr e s s to confirm the file. It begins to save and it goes back Manual statue when it finishes operating. The operating steps of Auto Copy file are the same with auto process file. There is a * symbol before the Processed Auto Copy Process File Tools Change After having set the tool change position in menu, selecting this item and then the machine goes to the

28 set position and wait for changing tool. Chapter IV RZNC Specifications ( U disk) Contents Specification Processor 160M DSP File Memorizer 128M memorizer inside, it supports file with any size because of adopting mobile memorize technology Display LCD with 128 dot*64 dot Communication Terminals USB terminal and U Disk File Format G code, PLT files (optional) Axes 3 axes Help Function Useful help information and guide Languages Chinese, English, Russia, France, Japanese(optional or customize) Operating Interface Friendly Buttons and Menu Drive Drive System Step Motors Interpolation function linear, curve Cutter Adjusting function Yes Spindle Control Function Yes System Data Inspect Function Yes Processing Data Inspect Function Yes Processing Position Adjusting Function Yes Multi Working Coordinates It has 9 working coordinates Stop Point Reprocessing Function Yes Copy Processing Function Yes Data protection when power off Yes Working Temperature 0 C to +70 C Humidity <90% no dew no frost Outer Voltage 5 V Consumptions 2 W Dimensions(mm) 156*110*38

29 JCUT CNC Equipment Co., Ltd 1014 Room No.40 Huayuan Road,Jinan Shandong China ZIP: TEL: FAX: (Technology) (Sale)

E M C P e r f o r m a n c e R e q u i r e m e n t s C o m p o n e n t s

E M C P e r f o r m a n c e R e q u i r e m e n t s C o m p o n e n t s D a i m l e r C h r y s l e r D C -1 0 6 1 4 J o i n t E n g i n e e r i n g S t a n d a r d D a t e P u b l i s h e d : 2 0 0 5-03 C h r y s l e r C a t e g o r y : L -2 T ot a l N o. of Pa g e s ( I

More information

CHAPTER 12. Accounting Principles ASSIGNMENT CLASSIFICATION TABLE. Brief. B Problems. A Problems 1, 2 1, 2

CHAPTER 12. Accounting Principles ASSIGNMENT CLASSIFICATION TABLE. Brief. B Problems. A Problems 1, 2 1, 2 CHAPTER 12 Accounting Principles ASSIGNMENT CLASSIFICATION TABLE Study Objectives Questions Brief Exercises Exercises A Problems B Problems 1. Explain the meaning of generally accepted accounting principles

More information

B y R us se ll E ri c Wr ig ht, DV M. M as te r of S ci en ce I n V et er in ar y Me di ca l Sc ie nc es. A pp ro ve d:

B y R us se ll E ri c Wr ig ht, DV M. M as te r of S ci en ce I n V et er in ar y Me di ca l Sc ie nc es. A pp ro ve d: E ff ec ts o f El ec tr ic al ly -S ti mu la te d Si lv er -C oa te d Im pl an ts a nd B ac te ri al C on ta mi na ti on i n a Ca ni ne R ad iu s Fr ac tu re G ap M od el B y R us se ll E ri c Wr ig ht,

More information

1.- L a m e j o r o p c ió n e s c l o na r e l d i s co ( s e e x p li c a r á d es p u é s ).

1.- L a m e j o r o p c ió n e s c l o na r e l d i s co ( s e e x p li c a r á d es p u é s ). PROCEDIMIENTO DE RECUPERACION Y COPIAS DE SEGURIDAD DEL CORTAFUEGOS LINUX P ar a p od e r re c u p e ra r nu e s t r o c o rt a f u e go s an t e un d es a s t r e ( r ot u r a d e l di s c o o d e l a

More information

Put the human back in Human Resources.

Put the human back in Human Resources. Put the human back in Human Resources A Co m p l et e Hu m a n Ca p i t a l Ma n a g em en t So l u t i o n t h a t em p o w er s HR p r o f essi o n a l s t o m eet t h ei r co r p o r a t e o b j ect

More information

Campus Sustainability Assessment and Related Literature

Campus Sustainability Assessment and Related Literature Campus Sustainability Assessment and Related Literature An Annotated Bibliography and Resource Guide Andrew Nixon February 2002 Campus Sustainability Assessment Review Project Telephone: (616) 387-5626

More information

FORT WAYNE COMMUNITY SCHOOLS 12 00 SOUTH CLINTON STREET FORT WAYNE, IN 468 02 6:02 p.m. Ma r c h 2 3, 2 015 OFFICIAL P ROCEED ING S Ro l l Ca l l e a r d o f h o o l u e e o f t h e r t y m m u t y h o

More information

1s 1. [He]2s 1. [He]2s 2. [He]2s 2 2p 2. [He]2s 2 2p 1. [He]2s 2 2p 4. [He]2s 2 2p 3. [He]2s 2 2p 6. [He]2s 2 2p 5

1s 1. [He]2s 1. [He]2s 2. [He]2s 2 2p 2. [He]2s 2 2p 1. [He]2s 2 2p 4. [He]2s 2 2p 3. [He]2s 2 2p 6. [He]2s 2 2p 5 Symbol: He Atomic Number: 2 Molar Mass: 4.003 g/mol Electronegativity: - 1s 2 Symbol: H Atomic Number: 1 Molar Mass: 1.008 g/mol Electronegativity: 2.20 1s 1 Symbol: Be Atomic Number: 4 Molar Mass: 9.012

More information

Bluetooth USB Serial Adaptor

Bluetooth USB Serial Adaptor Bluetooth USB Serial Adaptor HANTZ + PARTNER The Upgrade Company! www.hantz.com Model name: BM2001 User Manual ver 3.2 ABOUT BM2001 Class 1 / USB Interface DIP switch is available for a second setting

More information

Electronic Stability & Periodic Table

Electronic Stability & Periodic Table Electronic Stability & Periodic Table Things at higher energy are less stable!! All living things are dependent on their ability to acquire energy from unstable things! The compounds in the food you eat

More information

B I N G O B I N G O. Hf Cd Na Nb Lr. I Fl Fr Mo Si. Ho Bi Ce Eu Ac. Md Co P Pa Tc. Uut Rh K N. Sb At Md H. Bh Cm H Bi Es. Mo Uus Lu P F.

B I N G O B I N G O. Hf Cd Na Nb Lr. I Fl Fr Mo Si. Ho Bi Ce Eu Ac. Md Co P Pa Tc. Uut Rh K N. Sb At Md H. Bh Cm H Bi Es. Mo Uus Lu P F. Hf Cd Na Nb Lr Ho Bi Ce u Ac I Fl Fr Mo i Md Co P Pa Tc Uut Rh K N Dy Cl N Am b At Md H Y Bh Cm H Bi s Mo Uus Lu P F Cu Ar Ag Mg K Thomas Jefferson National Accelerator Facility - Office of cience ducation

More information

SCO TT G LEA SO N D EM O Z G EB R E-

SCO TT G LEA SO N D EM O Z G EB R E- SCO TT G LEA SO N D EM O Z G EB R E- EG Z IA B H ER e d it o r s N ) LICA TIO N S A N D M ETH O D S t DVD N CLUDED C o n t e n Ls Pr e fa c e x v G l o b a l N a v i g a t i o n Sa t e llit e S y s t e

More information

Electron Configuration Activity

Electron Configuration Activity Electron Configuration Activity Purpose To find the relationship between electron configuration and organization of the periodic table. Materials Paper copy of the periodic table colored pencils or markers

More information

Tendo Power Analyzer Computer Software USER S MANUAL. Version V

Tendo Power Analyzer Computer Software USER S MANUAL. Version V Tendo Power Analyzer Computer Software USER S MANUAL Version V- 4.1 www.tendosport.com 1 Contents 1. Introduction 3 2. Installation 3 2.1 Uninstalling software 3 2.2 Installing software 3 2.3 Driver Installation

More information

C o a t i a n P u b l i c D e b tm a n a g e m e n t a n d C h a l l e n g e s o f M a k e t D e v e l o p m e n t Z a g e bo 8 t h A p i l 2 0 1 1 h t t pdd w w wp i j fp h D p u b l i c2 d e b td S t

More information

DT800(E75) Lane Timer Instruction Manual

DT800(E75) Lane Timer Instruction Manual DT800(E75) Lane Timer Instruction Manual Features: 1) 8000 Memories 2) Built-in PRINTER 3) Up to10 Lane Buttons 4) PC Upload Function 5) 12 / 24Hr User-selectable Clock 6) 4-Digit Bib Number 7) 4-Digit

More information

T h e m i n i m u m r eq u i r em en t s a r e essen t i a l t o st a r t a b a si c w o r k o n y o u r w eb ser v er. As technology is r a p id ly a

T h e m i n i m u m r eq u i r em en t s a r e essen t i a l t o st a r t a b a si c w o r k o n y o u r w eb ser v er. As technology is r a p id ly a Windows XP with Service Pack 2 Installation Guide T h i s set u p g u i d e w i l l g u i d e y o u t h r o u g h t h e st ep s r eq u i r ed t o i n st a l l W i n d o w s X P ser v i c e p a c k 2 o

More information

Original Form of Periodic Law

Original Form of Periodic Law Original Form of Periodic Law "Properties of elements are a periodic function of their atomic weights." Dmitri Mendeleev (Russian) Julius Lothar Meyer (German) 1869 Modern Periodic Law "Properties of elements

More information

Reading Horizons Discovery. Harcourt Trophies. Kindergarten

Reading Horizons Discovery. Harcourt Trophies. Kindergarten Reading Horizons Discovery and Harcourt Trophies Kindergarten Correlated by Joan Parrish for Reading Horizons June 2016 ii Table of Contents Reading Horizons Discovery Correlation to Harcourt Trophies

More information

AUS-e-TUTE. Periodic Table Lessons and Activities. ausetute.com.au. Definition of Terms used in this publication: Crossword: Drill: Exam:

AUS-e-TUTE. Periodic Table Lessons and Activities. ausetute.com.au. Definition of Terms used in this publication: Crossword: Drill: Exam: 2012 AUS-e-TUTE Periodic Table Lessons and Activities Definition of Terms used in this publication: requires students to find and enter information, Interactive Learning Activity: then guides them through

More information

Printer Sharing the PT-9500pc in a Windows Environment

Printer Sharing the PT-9500pc in a Windows Environment Printer Sharing the PT-9500pc in a Windows Environment The procedure for using the printer sharing feature in Microsoft Windows to share the PT-9500pc is described below. The information provided has been

More information

The Periodic Table, Electron Configuration & Chemical Bonding. Lecture 7

The Periodic Table, Electron Configuration & Chemical Bonding. Lecture 7 The Periodic Table, Electron Configuration & Chemical Bonding Lecture 7 Electrons We will start to look at the periodic table by focusing on the information it gives about each element s electrons. How

More information

Meridian 861v4 RS232 Interface.

Meridian 861v4 RS232 Interface. Meridian 861v4 RS232 Interface. General Information The RS232 interface for the 861 can be operated from any terminal that operates at 9600 baud with 1 start bit, 1 stop bit and no parity. Commands take

More information

USER S MANUAL. Tendo Weightlifting Analyzer Computer Software. Version V-3.6

USER S MANUAL. Tendo Weightlifting Analyzer Computer Software. Version V-3.6 Tendo Weightlifting Analyzer Computer Software USER S MANUAL Version V-3.6 Interface Model 4Stations Interface with Bluetooth Single Station Interface www.tendosport.com 1 Contents 1. Introduction 3 2.

More information

USER MANUAL (Rev.: V2.3)

USER MANUAL (Rev.: V2.3) 3.5 INTERNAL MULTI I/O CARD READER USER MANUAL (Rev.: V2.3) INDEX Trademarks --------------------------------------------------------------------- Introductions -------------------------------------------------------------------

More information

PN-L601B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL

PN-L601B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL PN-L601B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Contents Setting up the PC...3 Installing the touch panel driver...3 Touch Panel Settings...4 How to configure settings...4 Calibration...5 Properties...6

More information

PE97022 EVALUATION KIT USER S MANUAL

PE97022 EVALUATION KIT USER S MANUAL PE97022 EVALUATION KIT USER S MANUAL Peregrine Semiconductor Corp. 9380 Carroll Park Drive, San Diego, CA 92121 (858) 731-9400, Fax (858) 731-9499 http://www.psemi.com 79-0119-01 www.psemi.com 2008 Peregrine

More information

USB Digital Video Conver ter. Models VA11A and VA12A

USB Digital Video Conver ter. Models VA11A and VA12A USB Digital Video Conver ter Models VA11A and VA12A Introduction Thank you for purchasing the X10 USB Digital Video Converter. The X10 software you purchased, in conjunction with the video converter, allows

More information

Blocks on the periodic table. Atomic weight: This is either a decimal number or a number in parenthesis.

Blocks on the periodic table. Atomic weight: This is either a decimal number or a number in parenthesis. 68 Blocks on the periodic table 11 Sodium 22.99 Atomic number: This is always a whole number. The periodic table is arranged by atomic number! Element symbol: A one or two letter abbreviation for the name

More information

CHEM 114: Mid-course TEST Wednesday 23 rd March pm Answer ALL QUESTIONS

CHEM 114: Mid-course TEST Wednesday 23 rd March pm Answer ALL QUESTIONS NAME:. STUDENT ID N o. CHEM 114: Mid-course TEST Wednesday 23 rd March 2016 7.00 8.10pm Answer ALL QUESTIONS TIME MANAGEMENT: This examination is marked out of 60. An approximate marking scheme is provided

More information

1.0. User s Guide & Manual USB 2.0 FLASH DRIVE

1.0. User s Guide & Manual USB 2.0 FLASH DRIVE 1.0 USB 2.0 FLASH DRIVE User s Guide & Manual Index Introduction 1 CHAPTER1 Features & Specifications 2 CHAPTER2 System Requirements 4 CHAPTER3 Getting Started Installation of the Windows 98SE Driver 5

More information

Table of Contents INTRODUCTION... 1 FEATURES AND SPEC... 2 OPERATIONAL GUIDE... 3 USB2.0 CARDBUS DRIVER INSTALLATION... 3

Table of Contents INTRODUCTION... 1 FEATURES AND SPEC... 2 OPERATIONAL GUIDE... 3 USB2.0 CARDBUS DRIVER INSTALLATION... 3 Table of Contents INTRODUCTION... 1 FEATURES AND SPEC... 2 OPERATIONAL GUIDE... 3 USB2.0 CARDBUS DRIVER INSTALLATION... 3 WIN98 DRIVER INSTALLATION... 3 WIN2000 DRIVER INSTALLATION... 6 WINME DRIVER INSTALLATION...

More information

AR-5316 AR-5320 AR-5316 X AR-5320 X

AR-5316 AR-5320 AR-5316 X AR-5320 X MODEL AR-56 AR-50 AR-56 X AR-50 X DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE INTRODUCTION BEFORE INSTALLATION INSTALLING THE PRINTER DRIVER CONNECTING TO A COMPUTER CONFIGURING THE PRINTER DRIVER

More information

SAMPLE KYRIE. Re m Dm. Re m Dm. Sol m Gm. Re m Dm. Fa F. Sol m Gm. Si B. son. son. ri e e lé. lé i. Chri. ste. ri e e. Si B. Re m Dm. Sol m7 Gm7.

SAMPLE KYRIE. Re m Dm. Re m Dm. Sol m Gm. Re m Dm. Fa F. Sol m Gm. Si B. son. son. ri e e lé. lé i. Chri. ste. ri e e. Si B. Re m Dm. Sol m7 Gm7. KYRIE m Sol m m m Sol m m m Fa F Si B Ky ri e e lé i son. Ky ri e e lé i son. Chri ste e Sol m7 m7 lé e i e Fa F son. Sol m m lé i m son. Chri Ky SMPLE ste Si B e ri e e Sol m7 m7 lé Sol m m lé i i Fa

More information

1. Atomic Structure Review

1. Atomic Structure Review 1. Atomic Structure Review Element Name Calcium - 42 Mass Number (P+N) Mass Number (P+N) 42 20Ca 2 Charge (P vs. E) Atomic Number (P) Element Symbol Bohr Model of the Atom: Modern Quantum theory Electrons

More information

Routout CNC Dragon Processor 3 Axis Stepper Motor Controller Version 1.2

Routout CNC Dragon Processor 3 Axis Stepper Motor Controller Version 1.2 Routout CNC Dragon Processor 3 Axis Stepper Motor Controller Version 1.2 The Routout CNC Dragon Processor is a three axis control board, and has many uses including for CNC retrofitting / robot control

More information

CHEMICAL COMPOUNDS MOLECULAR COMPOUNDS

CHEMICAL COMPOUNDS MOLECULAR COMPOUNDS 48 CHEMICAL COMPOUNDS - Dalton's theory does not mention this, but there is more than one way for atoms to come together to make chemical compounds! - There are TWO common kinds of chemical compound, classified

More information

HY-3040-TB5 Mini 5 Axis CNC Manual

HY-3040-TB5 Mini 5 Axis CNC Manual Web: http://www.chinacnczone.com/ Phone: 86-755-83692414 Mail: sales@chinacnczone.com Address: Nankeng First Industry Park, Bantian, Longgang District, Shenzhen, China HY-3040-TB5 Mini 5 Axis CNC Manual

More information

Acer MP3 Flash Stick. User Manual. MP3 Music Player+Digital Voice Recorder+USB Flash Drive

Acer MP3 Flash Stick. User Manual. MP3 Music Player+Digital Voice Recorder+USB Flash Drive Acer MP3 Flash Stick User Manual MP3 Music Player+Digital Voice Recorder+USB Flash Drive Table of Contents 1. Introduction 1.1 About Acer MP3 Flash Stick-------------------------------------------------------------------------------------

More information

Quick Start Guide. Mini MODEL: PNDMPCWX32

Quick Start Guide. Mini MODEL: PNDMPCWX32 Quick Start Guide Mini MODEL: PNDMPCWX32 Contents Contents. 1 General notices for use 2 Disclaimer. 2 Box Contents. 3 1.1. Product display 4 1.2. Instructions for use. 4 1.3. Desktop. 5 1.4. Wi-Fi settings...5

More information

EPSON USB/Parallel Adapter User s Guide

EPSON USB/Parallel Adapter User s Guide EPSON USB/Parallel Adapter User s Guide EPSON Stylus COLOR 440 EPSON Stylus COLOR 800 EPSON Stylus COLOR 600 EPSON Stylus COLOR 850 EPSON Stylus COLOR 640 EPSON Stylus COLOR 1520 EPSON Stylus Photo EX

More information

Chemistry 143 Electron Configurations Dr. Caddell

Chemistry 143 Electron Configurations Dr. Caddell NAME: KEY Electron Configurations Write the complete (expanded) electron configurations and core (noble gas) electron configurations for the following elements. Use only this periodic table for reference.

More information

EPSON USB/Parallel Adapter User s Guide

EPSON USB/Parallel Adapter User s Guide EPSON USB/Parallel Adapter User s Guide EPSON Stylus COLOR 440 EPSON Stylus COLOR 1520 EPSON Stylus COLOR 600 EPSON Stylus COLOR 3000 EPSON Stylus COLOR 640 EPSON Stylus Photo 700 EPSON Stylus COLOR 660

More information

I n la n d N a v ig a t io n a co n t r ib u t io n t o eco n o m y su st a i n a b i l i t y

I n la n d N a v ig a t io n a co n t r ib u t io n t o eco n o m y su st a i n a b i l i t y I n la n d N a v ig a t io n a co n t r ib u t io n t o eco n o m y su st a i n a b i l i t y and KB rl iak s iol mi a, hme t a ro cp hm a5 a 2k p0r0o 9f i,e ls hv oa nr t ds eu rmv oedye l o nf dae cr

More information

R e t r o f i t o f t C i r u n i s g e C o n t r o l

R e t r o f i t o f t C i r u n i s g e C o n t r o l R e t r o f i t o f t C i r u n i s g e C o n t r o l VB Sprinter D e s c r i p t i o n T h i s r e t r o f i t c o n s i s t s o f i n s t a l l i n g a c r u i s e c o n t r o l s wi t c h k i t i n

More information

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 1 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER 2 1.1 Controller 2 1.2 Specifications and Features 3 CHAPTER 2. INSTALLING TOUCHKIT

More information

Pegasus J2 Windows Installation Guide

Pegasus J2 Windows Installation Guide J2 Pegasus J2 Windows Installation Guide!! ii Promise Technologies Contents Packing List 1 System requirements for Windows 2 Summary of Windows setup procedure 3 Install J2 6 Pegasus J2 Driver and WebPAM

More information

I n t r o d u c t i o n t o E c o t e c t v 5. 6 M o d e l i n g P a g e 1 o f 10 J u i n t o w L i n

I n t r o d u c t i o n t o E c o t e c t v 5. 6 M o d e l i n g P a g e 1 o f 10 J u i n t o w L i n U SI NG T H E A NAL Y S I S G RI D I N E COT E CT J u i n t o w L i n As s i s t a n t Prof e s s o r Cal Po ly Pomo n a De p a r t m e n t o f Ar c h i t e c t u r e 3 8 0 1 W. T e m p le A v e Po m o

More information

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters). For Windows XP Users Setting Up the machine and PC to Work Together Before You begin When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).

More information

Yaskawa SMC Serial Port and TCP

Yaskawa SMC Serial Port and TCP Yaskawa SMC Serial Port and TCP Information Sheet for Crimson v2.0 Compatible Devices SMC 3010, 4000, 2000 Verified Device 3010 Accessible Data ABBR ACTION ACTION TYPE AB Abort Motion and Program COMMAND

More information

STEEL PIPE NIPPLE BLACK AND GALVANIZED

STEEL PIPE NIPPLE BLACK AND GALVANIZED Price Sheet CWN-616 Effective June 06, 2016 Supersedes CWN-414 A Member of The Phoenix Forge Group CapProducts LTD. Phone: 519-482-5000 Fax: 519-482-7728 Toll Free: 800-265-5586 www.capproducts.com www.capitolcamco.com

More information

RST INSTRUMENTS LTD.

RST INSTRUMENTS LTD. RST INSTRUMENTS LTD. Digital Bus Tilt Meter Host Software Instruction Manual PC Platform Ltd. 11545 Kingston St., Maple Ridge, B.C. Canada V2X 0Z5 Tel: 604-540-1100 Fax: 604-540-1005 e-mail: info@rstinstruments.com

More information

O.C. White Image Acquisition and Measurement Software for use with the O.C. White 2.0 Megapixel Camera

O.C. White Image Acquisition and Measurement Software for use with the O.C. White 2.0 Megapixel Camera O.C. White Image Acquisition and Measurement Software for use with the O.C. White 2.0 Megapixel Camera USB Camera with Drivers and Software for Microsoft Windows Computers Works with laptop computers too

More information

7' RICOCHET SHUFFLEBOARD TABLE

7' RICOCHET SHUFFLEBOARD TABLE 7' RICOCHET SHUFFLEBOARD TABLE ASSEM BLYL INSTRUCTIONS NG1201 THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h e g l o

More information

The Periodic Table of the Elements. The Periodic Table of the Elements QUIZ THURSDAY Oct 20

The Periodic Table of the Elements. The Periodic Table of the Elements QUIZ THURSDAY Oct 20 The Periodic Table of the Elements 1 18 1 2 H 2 13 14 15 16 17 He 1.0079 4.0026 3 4 5 6 7 8 9 10 Li Be B C N O F Ne 6.941 9.01218 10.811 12.011 14.0067 15.9994 18.9984 20.1797 11 12 13 14 15 16 17 18 Na

More information

Sound Blending Exercises - Short Vowel Chunks

Sound Blending Exercises - Short Vowel Chunks Sound Blending Exercises - Short Vowel Chunks Step 1 - Students pronounce vowel-consonant combinations. Students learn to connect a final consonant sound to a short vowel. u b c d f g h j k l m n p qu

More information

T e s t e xp re s s i o n B o d y o f i f E xi t F i g u re 1 - F l o w c h art o f th e i f s tate m M u l ti S tate m s i n th e i f B o d y : L ik

T e s t e xp re s s i o n B o d y o f i f E xi t F i g u re 1 - F l o w c h art o f th e i f s tate m M u l ti S tate m s i n th e i f B o d y : L ik MQL4 COURSE By Coders guru w w w. f orex -t sd. c om -6- Loops & Decisions Part 2 ---------------------------- We l c o m e t o t h e s ix t h l e s s o n in m y c o u r s e a b o u t M Q L 4. I h o pe

More information

Chemical Bonding Many-Electron Atoms and the Periodic Table Experimental Measures of Orbital Energies Sizes of Atoms and Ions

Chemical Bonding Many-Electron Atoms and the Periodic Table Experimental Measures of Orbital Energies Sizes of Atoms and Ions Chapter 17 Many-Electron Atoms and Chemical Bonding 17.1 Many-Electron Atoms and the Periodic Table 17.2 Experimental Measures of Orbital Energies 17.3 Sizes of Atoms and Ions 17.4 Properties of the Chemical

More information

BLADE 12th Generation. Rafał Olszewski. Łukasz Matras

BLADE 12th Generation. Rafał Olszewski. Łukasz Matras BLADE 12th Generation Rafał Olszewski Łukasz Matras Jugowice, 15-11-2012 Gl o b a l M a r k e t i n g Dell PowerEdge M-Series Blade Server Portfolio M-Series Blades couple powerful computing capabilities

More information

VISIONEER USB IN 1 CARD READER/WRITER USER MANUAL

VISIONEER USB IN 1 CARD READER/WRITER USER MANUAL VISIONEER USB 2.0 12 IN 1 CARD READER/WRITER USER MANUAL INDEX Trademarks --------------------------------------------------------------------- 2 Introduction --------------------------------------------------------------------

More information

Datalogger and RS232 Interface

Datalogger and RS232 Interface Datalogger and RS232 Interface RS232 Wiring Hardware 2 RS232 Code.. 3 Hardware Requirements and Setup 4 Software Requirements and Setup.. 5 Communicating Operation. 8 Run the Software......8 Record.. 10

More information

INSTALLATION AND USE GUIDE. SIC TOOLS e8v5

INSTALLATION AND USE GUIDE. SIC TOOLS e8v5 INSTALLATION AND USE GUIDE SIC TOOLS e8v5 SIC MARKING 13 route de Limonest ZAC de la Braille 69380 LISSIEU France Téléphone : (+33) 04.72.54.80.00 Télécopie : (+33) 04.78.47.39.40 E-Mail : info@sic-marking.com

More information

Connecting your Omega/BetaPAT PLUS to a PC via a USB

Connecting your Omega/BetaPAT PLUS to a PC via a USB Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the

More information

Point of view HDMI Smart TV dongle Mini RF Keyboard

Point of view HDMI Smart TV dongle Mini RF Keyboard Point of view HDMI Smart TV dongle Mini RF Keyboard English Contents Contents... 1 General notices for use... 2 Disclaimer... 2 Box Contents... 2 1. HDMI TV dongle... 3 1.1. Product display... 3 1.2. Instructions

More information

USB2.0 PCMCIA Adapter 2 Port

USB2.0 PCMCIA Adapter 2 Port Manual USB2.0 PCMCIA Adapter 2 Port english Manual_Page 2 Content Package Contents 3 Important Precautions 3 1. Introduction 4 1.1 General Information 4 1.2 Key Features 4 1.3 Specifications 4 1.4 Product

More information

Controller setting kit install manual (bundled with CD-ROM)

Controller setting kit install manual (bundled with CD-ROM) Document No: JXC -OMU0016 PRODUCT NAME Controller setting kit install manual (bundled with CD-ROM) MODEL/ Series LEC-W2 JXC-W2 LEC-W2, JXC-W2 procedure for installing driver and software Please refer to

More information

JCUT CNC Router 3030A/6090/8090/1212/60150/1218/1224/1325/1530/A/B

JCUT CNC Router 3030A/6090/8090/1212/60150/1218/1224/1325/1530/A/B JCUT CNC Router 3030A/6090/8090/1212/60150/1218/1224/1325/1530/A/B User s Operation Manual Jinan Jcut CNC Equipment Co., Ltd. Content Content... 1 Ⅰ. Introduction of wiring of CNC router.......2.2 Ⅱ.Install

More information

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 TouchKit Manual for Win2000/XP v4.0.2 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER...2 1.1 CONTROLLER...2 1.2 SPECIFICATIONS

More information

Hi-Speed USB Portable Flash Disk End-User s Manual Guide

Hi-Speed USB Portable Flash Disk End-User s Manual Guide Hi-Speed USB Portable Flash Disk End-User s Manual Guide Contents Version 1.1 (06/11/2003) Contents...1 Introduction...1 Features & Specifications...2 System Requirements...2 Using the Hi-Speed USB Flash

More information

EPSON USB/Parallel Adapter User s Guide

EPSON USB/Parallel Adapter User s Guide EPSON USB/Parallel Adapter User s Guide for the EPSON Stylus COLOR 440, EPSON Stylus COLOR 640, EPSON Stylus COLOR 600 and EPSON Stylus Photo EX IMPORTANT: To use the USB/Parallel Adapter with your Apple

More information

USB 2.0 Data/Net-Link Cable. User Manual

USB 2.0 Data/Net-Link Cable. User Manual USB 2.0 Data/Net-Link Cable User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Jul/03 1 MN0025010001 Overview The USB 2.0 Data/Net-Link Cable is Hi-Speed USB

More information

PERIODIC TABLES: I. Directory, II. Traditional, III. Vertical, IV. Toxicity (LD 50 values), V. Native (elemental form)

PERIODIC TABLES: I. Directory, II. Traditional, III. Vertical, IV. Toxicity (LD 50 values), V. Native (elemental form) PERIODIC TABLES: I. Directory, II. Traditional, III. Vertical, IV. Toxicity (LD 50 values), V. Native (elemental form) Site developed by Steve Murov, Professor Emeritus of Chemistry, Modesto Junior College,

More information

LASER CONTROL PANNEL. By:

LASER CONTROL PANNEL. By: LASER CONTROL PANNEL By: 1 Table of Contents 1.Press keys.1 2.Panel operation.....3 3.Trouble and troubleshooting.....24 4. CorelDraw Direct Output 26 5. AutoCAD Direct Output..49 6.Buttons of the Carving/

More information

DIGITAL GAME CAMERA INSTRUCTION MANUAL. and you are ready to go! SET TIME & DATE MOVE TO SETUP MOVE TO AUTO WAIT FOR LIGHT TO GO OUT

DIGITAL GAME CAMERA INSTRUCTION MANUAL. and you are ready to go! SET TIME & DATE MOVE TO SETUP MOVE TO AUTO WAIT FOR LIGHT TO GO OUT 5 EASY STEPS DIGITAL GAME CAMERA INSTRUCTION MANUAL and you are ready to go! ONE TWO THREE LOAD BATTERY AND TURN POWER ON MOVE TO SETUP SET TIME & DATE FOUR FIVE MOVE TO AUTO WAIT FOR LIGHT TO GO OUT Please

More information

Clicking on Heaven s Door: The Effect of Immigrant Legalization on Crime Paolo Pinotti

Clicking on Heaven s Door: The Effect of Immigrant Legalization on Crime Paolo Pinotti VOL. VOL NO. ISSUE CLICKING ON HEAVEN S DOOR 37 Appendix Not for Publication Clicking on Heaven s Door: The Effect of Immigrant Legalization on Crime Paolo Pinotti Estimating equations Consider a sample

More information

Authentication Unit (Biometric Type AU-101) User s Guide

Authentication Unit (Biometric Type AU-101) User s Guide A09M-9552-01 Authentication Unit (Biometric Type AU-101) User s Guide Contents Contents 1 Introduction... 2 1.1 Product features... 2 1.2 Prerequisites... 2 Device description... 4 2.1 Part names and their

More information

Robotic Arm with USB PC Interface User's Manual

Robotic Arm with USB PC Interface User's Manual Robotic Arm with USB PC Interface User's Manual Robotic Arm with USB PC Interface User's Manual Product Introduction Warning Caution CONTENTS 01 01 01 1.SET UP (For Windows XP) 1-1.Hardware and system

More information

H ig h L e v e l O v e r v iew. S te p h a n M a rt in. S e n io r S y s te m A rc h i te ct

H ig h L e v e l O v e r v iew. S te p h a n M a rt in. S e n io r S y s te m A rc h i te ct H ig h L e v e l O v e r v iew S te p h a n M a rt in S e n io r S y s te m A rc h i te ct OPEN XCHANGE Architecture Overview A ge nda D es ig n G o als A rc h i te ct u re O ve rv i ew S c a l a b ili

More information

CHOICE-Dr. install manual

CHOICE-Dr. install manual CHOICE-Dr. install manual for 64bit OS V1.53 2011. December CHIOCE-Dr. install manual - 1 Contents I. Install debugger package... 2 II. Install USB driver... 9 CHIOCE-Dr. install manual - 2 I. Install

More information

ClassPad Manager. User s Guide. Version 2.2 Update Limited Version. For ClassPad 300 PLUS (PROGRAM-LINK TM )

ClassPad Manager. User s Guide. Version 2.2 Update Limited Version. For ClassPad 300 PLUS (PROGRAM-LINK TM ) For ClassPad 300 PLUS E ClassPad Manager Version 2.2 Update Limited Version (PROGRAM-LINK TM ) User s Guide RJA510188-4 http://world.casio.com/edu/ http://classpad.net/ Note Display examples shown in this

More information

TouchKit Barco TouchScreen Controller. Installation & User Manual

TouchKit Barco TouchScreen Controller. Installation & User Manual TouchKit Barco TouchScreen Controller Installation & User Manual (This page intentionally left blank.) 2 Barco TouchScreen Controller Chapter 1. Installing TouchKit Chapter 1. Installing TouchKit TouchKit

More information

Why did it take approximately 2000 years before another viewpoint was accepted?

Why did it take approximately 2000 years before another viewpoint was accepted? SCHM 103: Fundamentals of Chemistry Ch. 3: The Evolution of Atomic Theory HISTORY OF THE ATOM Ancient Greek Philosophers Democritus (460 370 BC) Aristotle (382 322 BC) Why did it take approximately 2000

More information

Data Collection Software U-50PC. Instruction Manual. (P-No P A ver ) CODE:GZ A

Data Collection Software U-50PC. Instruction Manual. (P-No P A ver ) CODE:GZ A Data Collection Software U-50PC (P-No P2000484001A ver.1.0.1.5) Instruction Manual CODE:GZ0000145277A Preface This manual describes the operation of the Data Collection Software, U-50PC. Be sure to read

More information

Bluetooth RS232 Serial Adaptor

Bluetooth RS232 Serial Adaptor Bluetooth RS232 Serial Adaptor HANTZ + PARTNER The Upgrade Company! www.hantz.com Model name: BM1001 User Manual ver 3.1 ABOUT BM1001 Class 1 / RS232 Interface DIP switch is available for a second setting

More information

PL-25A1 Hi-Speed USB Easy Transfer Cable Windows Easy Transfer (WET) Program

PL-25A1 Hi-Speed USB Easy Transfer Cable Windows Easy Transfer (WET) Program PL-25A1 Hi-Speed USB Easy Transfer Cable Windows Easy Transfer (WET) Program (For Cable Manufacturer Reference Only Not for End-User Distribution) NOTE: Prolific only supplies the PL-25A1 controller chip,

More information

5. Tutorial. Starting FlashCut CNC

5. Tutorial. Starting FlashCut CNC FlashCut CNC Section 5 Tutorial 259 5. Tutorial Starting FlashCut CNC To start FlashCut CNC, click on the Start button, select Programs, select FlashCut CNC 4, then select the FlashCut CNC 4 icon. A dialog

More information

G ri d m on i tori n g w i th N A G I O S (*) (*) Work in collaboration with P. Lo Re, G. S av a and G. T ortone WP3-I CHEP 2000, N F N 10.02.2000 M e e t i n g, N a p l e s, 29.1 1.20 0 2 R o b e r 1

More information

USB to Gigabit Ethernet Adapter. User's Guide

USB to Gigabit Ethernet Adapter. User's Guide USB to Gigabit Ethernet Adapter User's Guide FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

More information

TRP-C08H. USB to 2 RS232 and 2 RS422/485 Isolated Converter. User s Manual

TRP-C08H. USB to 2 RS232 and 2 RS422/485 Isolated Converter. User s Manual TRP-C08H USB to 2 RS232 and 2 RS422/485 Isolated Converter User s Manual Printed Jun.2014 Rev 1.8 Trycom Technology Co.,Ltd No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan. Tel : 886-3-350-3351

More information

Robotic Arm Edge with USB PC Interface User's Manual

Robotic Arm Edge with USB PC Interface User's Manual Robotic Arm Edge with USB PC Interface User's Manual Robotic Arm Edge with USB PC Interface User's Manual CONTENTS Product Introduction Warning Caution 01 01 01 1.SET UP (For Windows XP 32-bit version)

More information

Operating Instructions

Operating Instructions Model No. TH-47LFT30W Operating Instructions TOUCH PANEL Edition FULL HD LCD Display English Please read these instructions before operating your set and retain them for future reference. Accessories Supply

More information

Installation Guide of Hi-Speed USB to Serial & Multi-Serial Adapter

Installation Guide of Hi-Speed USB to Serial & Multi-Serial Adapter Installation Guide of Hi-Speed USB to Serial & Multi-Serial Adapter The USB to Serial Adapters consist of the following models: USB to Single Serial Adapter USB to Single Serial Adapter USB Dual Serial

More information

CHEM Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work.

CHEM Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work. It is most beneficial to you to write this mock midterm UNDER EXAM CONDITIONS. This means: Complete the midterm in 1.5 hours. Work on your own. Keep your notes and textbook closed. Attempt every question.

More information

Hi-Speed USB 2.0 Flash Disk. User Manual

Hi-Speed USB 2.0 Flash Disk. User Manual Hi-Speed USB 2.0 Flash Disk User Manual Content Introduction 2 Features and Specifications..2 System Requirements....3 For Your Safety....3 Installation of USB Driver...4 Installing in Windows98/98SE OS

More information

Metals, Non-Metals, Metalloids and the Periodic Table

Metals, Non-Metals, Metalloids and the Periodic Table Metals, Non-Metals, Metalloids and the Periodic Table Matter and Elements Matter- anything that has mass and takes up space Element- a pure substance that cannot be broken down into a simpler substance

More information

15 Touch Screen Monitor

15 Touch Screen Monitor 15 Touch Screen Monitor Contents Notice... 3 Safety Information... 3 Precaution... 3 Package Contents... 3 Hardware Installation... 4 Input...4 Control Buttons... 5 OSD (On-Screen Display) Menu Mode...

More information

Atomic Structure.

Atomic Structure. Werner Heisenberg Atomic Structure http://www.science-class.net/8th_notes/8th_notes_mainpage.htm. John Dalton (766-844) thought that an atom is a sphere of matter that is the same throughout. 2. J.J. Thomson

More information

Interface Cable USB Driver Installation Manual

Interface Cable USB Driver Installation Manual Interface Cable USB Driver Installation Manual 1 Introduction 1-1 Purpose This manual explains how to install the interface cable USB driver. 1-2 Environment of use OS: Windows 7 or XP US edition, Japanese

More information