1 WINTECH MANAGER FAQ The purpose of this document is not to replace the complete user guide delivered on the Wintech Manager s CD. Most of the common question you may have about the use of the Wintech Manager software and the Wintech USB computer will find an answer on the complete user guide. The following pages will help you to solve issues linked to the installation and first use of the Wintech Manager software and Wintech USB computer. What is the minimum required configuration to install the Wintech Manager software on my personal computer? With which operating systems is the Wintech Manager software compatible? How long should the installation of the Wintech Manager software last? What is the normal process to install the Wintech Manager software? When should I plug the Wintech USB computer during the installation process? I inserted the CD into my PC CD drive but nothing happens. How should I proceed? When installing the Wintech Manager software, I get a message about Visual Basic. What should I answer in the displayed dialog boxes? When installing the Wintech Manager software, I get a message about MDAC. What should I answer in the displayed dialog boxes? The Wintech Manager software installation worked out normally, but nothing happens when I double click on the Wintech Manager icon of my PC s desktop. How to launch the software? The Wintech Manager software opened normally, but when I click on Enter I get the message «USB Computer Plug In required». What should I do? The Wintech Manager software installation worked out normally, but when I plug my Wintech USB computer on a USB port of my PC nothing happens. What should I do? I plugged my Wintech computer correctly on my PC, but it is not listed in the drives and storage devices of my PC (My Computer). Why? The Wintech Manager software installation worked out normally, but when I plus my Wintech USB on my PC for the first time, a «Found new hardware Wizard» window appears. What should I do? The Wintech Manager software worked out normally, but nothing happens when I plug my Wintech USB computer to my PC. What should I do? Should I do anything specific before unplugging my Wintech USB computer from my PC? Are you planning any improvement on the Wintech Manager software? How to check the version of Wintech Manager software installed on my PC and what does mean the indication at the top of the Wintech Manager software? The screens of my version of the Wintech Manager software are different from the samples you show n the complete user guide or on the FAQ. Why so? When I consult the monthly report, the current month is displayed at the top of the window, but the data on the graph concern all months except the current one. Why so? I am renewing my PC. How to transfer my data from my old PC to my new one? I need to format my PC, or re-install Windows or simply uninstall and re-install the Wintech Manager software. How to save my data?
2 After adding details to a trip using the free comments field, when I click on «Save», I got the message «Database Connect Error» and my details are lost? I use a Wintech Ultimate / HR / Alti together with the cadence option, but the cadence information are not displayed in the trip details? I did 2 trips on 2 different days, but the Wintech Manager software has sorted the 2 trips on the same day? On the altitude graph of my trip, the 2 first dots show 2 widely spreaded altitude data, whereas the altitude change wasn t so big on my first trip minutes?
3 What is the minimum required configuration to install the Wintech Manager software on my personal computer? PC only. Operating system: Windows XP, Vista or 7 (Seven) Processor : 1.3 GHz minimum RAM memory: 512 MB minimum Free memory on hard drive: 130 MB With which operating systems is the Wintech Manager software compatible? The Wintech Manager software is only compatible with Windows XP, Windows Vista and Windows 7 (Seven). How long should the installation of the Wintech Manager software last? Acceding to your PC s set up, the necessary time to install the Wintech Manager software on your PC can vary (from 2 to 10 minutes). The installation may also require an update of some components and files of your system: Visual Basic, MDAC, USB drivers and plug in At last, this installation may require 1 or more reboot of your system. What is the normal process to install the Wintech Manager software? Insert the CD delivered with your Wintech computer into the CD/DVD drive of your personal computer. The installation should start automatically.
4 When should I plug the Wintech USB computer during the installation process? You first must install the Wintech Manager software and open it. At the first opening of the software, when you click on Enter, you get the following message: At this time only, you can plug your Wintech USB computer on your PC. Respecting these steps ensure a proper installation of the software and all associated components.
5 I inserted the CD into my PC CD drive but nothing happens. How should I proceed? Double-click on the My Computer icon of your PC s desktop: Then, double-click on Wintech Manager (X:) :
6 At last, double-click on Wintech Manager VerX.XX to launch the installation wizard: From that moment on, the normal installation should last 2 to 5 minutes, according to your PC s set up. The following windows appear: Click Next.
7 Click Next. Click Next.
8 The installation starts and the following window appear to show the installation process: At the end of the installation process, the following window appears: Click Finish.
9 Once the installation is complete, a yellow shortcut named Wintech Manager is created on your PC s desktop: Double-click it to launch the Wintech Manager software.
10 A shortcut is also added to the program list that you access through the Windows Start program:
11 When installing the Wintech Manager software, I get a message about Visual Basic. What should I answer in the displayed dialog boxes? The Wintech Manager software has been created using the Visual Basic language. It is possible that the latest version of this language is missing on your PC. This is why the installation program requires this update. So, you get the following message: This update requires a reboot of your PC: Click OK. The PC stops, then start to boot again normally. The Wintech Manager software installation process re-starts before the end of the PC s reboot. Once the Wintech Manager software installation is complete, the PC ends its reboot process.
12 When installing the Wintech Manager software, I get a message about MDAC. What should I answer in the displayed dialog boxes? MDAC stands for «Microsoft Data Access Components». The update of this database to the 2.8 version is necessary for the Wintech Manager software to work properly. If this update is required on your PC, you get the following message: Click OK to allow the MDAC update and reboot your PC. The PC stops, then start to boot again normally. The Wintech Manager software installation process re-starts before the end of the PC s reboot. Once the Wintech Manager software installation is complete, the PC ends its reboot process.
13 The Wintech Manager software installation worked out normally, but nothing happens when I double click on the Wintech Manager icon of my PC s desktop. How to launch the software? During the installation process, the desktop shortcut might have been corrupted. To check this, make a right-click on the shortcut, and then click on Properties:
14 The following window appears: In the Target field should be written «C:\Programm Files\Wintech Manager\Wintech Manager.exe». If this is not the case, you need to create a new shortcut. Follow these steps. Double-click on My Computer on your PC s desktop:
15 Then, double-click on C: Then, on Program Files: At last, double-click on Wintech Manager:
16 In the next window, make a right-click on the file Wintech Manager.exe, point your mouse on Send To, then click on Desktop (create shortcut): A shortcut named Shortcut to Wintech Manager.exe is then created on your PC s desktop: Double-click on this icon to launch the Wintech Manager software. If you get this desktop shortcut problem, the shortcut in the program list might be corrupted as well and is to be replaced.
17 To do so, create a 2 nd shortcut, by using the procedure described above. Drag this new shortcut on the Start button Maintain the shortcut icon not the Start button for 1 second. The Start menu opens. Drag the shortcut icon on Programs for 1 second till the program list opens. Then drag and drop the shortcut icon on Wintech Manager. Delete the defective shortcut. Windows XP:
18 Windows Vista:
19 The Wintech Manager software opened normally, but when I click on Enter I get the message «USB Computer Plug In required». What should I do? This message only pops up the first time you open the Wintech Manager software to invite you to plus your Wintech USB computer on your PC: Click OK, and then plug your Wintech USB computer on a free USB port of your PC. It might happen that messages appear and icon gets animated in the notification area rat the bottom right of your PC s screen. Leave the process go on normally. A new window pops up to ask you to create a new user account: By default, this window is in English.
20 Click OK to create the profile of the 1st user account. You get the following window: You can only enter a name and save it by clicking on Save User. You will have the opportunity to come back to it later and modify the existing values. Then, you get the following window: Click Download data.
21 The pop up window appears to indicate the data download progress: Once the download is complete, the Wintech Manager software asks whether you want to delete all the files recorded into the Wintech USB computer: Only click Yes if you are sure to not need those data anymore. You can set up this function in the menu Settings > Computer of the Wintech Manager software (read complete user guide for further information)
22 Then, click on Enter to access all the functions of the Wintech. If you wish to complete or change the already created user account, at the top of any Trips, Reports of Settings screens, click on User: : Then, the following dialog box pops up: Click Edit to edit the selected user account. Click Delete to cancel this account. Scroll the name menu to select another user or a new one: To create a new user account, chose New User, then OK.
23 The Wintech Manager software installation worked out normally, but when I plug my Wintech USB computer on a USB port of my PC nothing happens. What should I do? First, check if the Wintech USB computer is plugged in the correct way. Indeed, the Wintech USB computer uses a simplified USB plug, and it is possible to insert it into a USB port in the wrong way. This has no consequences on your system. Simply reverse it. The brass parts of the plug must be in contact with the white or grey plastic tab of the USB port of your PC of USB extension. OK OK KO KO When using the USB wire extension of the Wintech Manager Retail kit, the screen of your Wintech USB computer must not be on the same side as the Mavic logo of the extension plug. In any case, PC must appear on the Wintech USB computer s screen:
24 I plugged my Wintech computer correctly on my PC, but it is not listed in the drives and storage devices of my PC (My Computer). Why? The Wintech USB computer is not a mass storage device. It cannot be used as a USB stick. So, even when plugged, it will never appear in the drive list of the My Computer window of your PC. This does not mean that it is not functioning. The Wintech Manager software is the sole mean to access the memory of your Wintech USB computer.
25 The Wintech Manager software installation worked out normally, but when I plug my Wintech USB computer on my PC for the first time, a «Found new hardware Wizard» window appears. What should I do? If you get this window, it means that all components have not been installed properly during the Wintech Manager software installation process: Simply click Next while Yes, this time only is checked. You then get the following window: Make sure the installation CD is in your CD/DVD drive of your PC. Then click Next while Install the software automatically (Recommended) is checked.
26 The necessary components (plug in) are installed automatically and the following window appears to confirm the completion of the process: Click Finish. BUT, if you get this window: Uncheck Don t prompt me again to install this software, and then click Back to proceed again the installation. If the problem is not solved, take contact with your MSC.
27 The Wintech Manager software worked out normally, but nothing happens when I plug my Wintech USB computer to my PC. What should I do? First check that PC is written on your Wintech USB computer: If this is the case, unplug it, close the Wintech Manager software and launch again. Then, click Enter. You should then get a USB Computer Plug In Required window: If this is not the case, it means that all components have not been installed correctly with the Wintech Manager software. So, you have to install them manually. Follow those steps:
28 Make sure the Wintech USB computer is properly plugged to your PC. In the Start menu, point your mouse to Settings, then Control Panel. Windows XP Windows Vista In the next window, double-click System (Windows XP) or Display devices (Windows Vista): Windows XP Windows Vista
29 For Windows XP only, in the next window, chose Advanced: Still for Windows XP only, on the next window click Device Manager:
30 For Windows XP and Windows Vista, the next window shows all the devices installed on your computer: Your Wintech USB computer should be listed as Other devices. Click on the + toward it to see it. So far, your Wintech Manager computer is named USB to UART Bridge Controller and a? and a! are displayed, which indicates that the Wintech Manager has not been recognized yet by your PC. Click on Scan for hardware changes: The following window appears:
31 An automatically becomes: Click Yes, I have already connected the hardware. Then, click Next. Click Next again while Yes, this time only is checked. You get the following window: Make sure the Wintech Manager software installation CD is into the CD/DVD drive of your PC, then click Next while Install the software automatically (Recommended) is checked.
32 The necessary components (plug in) are automatically installed and the following window appears to confirm the success of the installation: BUT, if you get this window: Uncheck Don t prompt me again to install this software, then click Back to precede again the installation.. If the problem is not solved, take contact with your MSC. When the installation is complete, you can check the system is working normally by going back to the device manager window. When your Wintech USB computer is connected to your PC, it appears in the list Universal Serial Bus Controller under the name USBXpress Device. If the problem persists contact your MSC.
33 Should I do anything specific before unplugging my Wintech USB computer from my PC? You can unplug your Wintech without any specific procedure, as long as any of the following dialog boxes is not displayed: Are you planning any improvement on the Wintech Manager software? We are currently working on the Wintech Manager software evolutions. Those evolutions will be available as free download on our website Visit this site regularly to check for the latest Wintech Manager software version and make sure you always use the most up to date version.
34 How to check the version of Wintech Manager software installed on my PC and what does mean the indication at the top of the Wintech Manager software? When opening the Wintech Manager software and when your Wintech USB computer is NOT plugged to your PC, the top of the software window is as follow: In this example: - Ver states the Wintech Manager software version actually installed on your PC. - Bike Computer CO4 states the model of Wintech USB computer that was last plugged. Manager. The various models are named: o Wintech USB Ultimate : CO4 o Wintech USB Alti : CO3 o Wintech USB HR : CO2 o Wintech USB : CO1 When plugging your Wintech computer to your PC, the information at the top of the screen changes so: The first information is now topped with the Wintech USB computer firmware version. In this example, you are using the 3.86 version of the Wintech Manager software, together with a Wintech USB Ultimate computer, which firmware version is 042. In case of failure of your Wintech USB computer, our after-sales service may ask you to communicate them those data, in order to more precisely diagnose the failure. The screens of my version of the Wintech Manager software are different from the samples you show n the complete user guide or on the FAQ. Why so? The Wintech Manager software screens automatically adapt to the last Wintech USB computer model plugged to it, according to the functions available on this computer (altimeter, heart rate monitor ).
35 When I consult the monthly report, the current month is displayed at the top of the window, but the data on the graph concern all months except the current one. Why so? On the 3.86 version of the Wintech Manager software, when clicking on Report>Monthly, you get the following screen: In this example, we are in December, but only the October and November trips are displayed, while the December trips are missing. This error disappears when you display another month by clicking on the prev button at the top right of this screen: Only the November trips are now displayed.
36 If you go back to December again, only the December trips are now displayed: This error only comes the first time you click on Monthly>Report. This error has been identified by our development team and only happens on the 3.86 version of the Wintech Manager software. The next version of the Wintech Manager software will correct it. Visit regularly to check for the latest Wintech Manager software version and make sure you always use the most up to date version.
37 I am renewing my PC. How to transfer my data from my old PC to my new one? I need to format my PC, or re-install Windows or simply uninstall and re-install the Wintech Manager software. How to save my data? On your old PC (or before formatting or uninstalling), open the folder C:\Program Files\Wintech Manager. Copy the 3 files named SiUSB2K.dll, SiUSB98.dll and SiUSBXp.dll on a removable storage device (USB stick, external hard drive disk ) to be able to install them on your new PC (or re-install them after formatting or re-installing).
38 On your new PC (or your formatted or re-installed PC), first install the Wintech Manager software, following the procedure described here before. Before you open the newly installed Wintech Manager software, open the folder C:\Program Files\Wintech Manager of your new PC (or of your formatted or re-installed PC). In this folder, replace the 3 existing files named SiUSB2K.dll, SiUSB98.dll and SiUSBXp.dll by those previously copied on your removable storage device. Next time you open your Wintech Manager software with your new PC (or your formatted or re-installed PC), you will find all your data again: user profile, trips, reports, settings RETOUR After adding details to a trip using the free comments field, when I click on «Save», I got the message «Database Connect Error» and my details are lost? The comment field does not accept apostrophes. If you typed one in, saving your comment and all other customized trip details, saving them is impossible and you get the message bellow: You need to remove this apostrophe to be able to save your details. This malfunction is identified. A new version of the Wintech Manager software will solve it. Visit regularly to check for the latest Wintech Manager software version and make sure you always use the most up to date version.
39 I use a Wintech Ultimate / HR / Alti together with the cadence option, but the cadence information are not displayed in the trip details? It is not possible to display cadence information details with the actual version of the Wintech Manager software, when used with a Wintech Ultimate, HR or Alti. A new version of the Wintech Manager software will make it possible. Visit regularly to check for the latest Wintech Manager software version and make sure you always use the most up to date version. I did 2 trips on 2 different days, but the Wintech Manager software has sorted the 2 trips on the same day? At the end of your 1 st trip, after saving it ( Save on your Wintech computer screen), if your bike was still moving, the computer has received a signal from the sensor. This signal has initiated the start of the next trip. The Wintech Manager software uses the date and hour of the 1 st received signal as date and hour of the trip start. So, it is normal that it sorts the 2 trips to the same day. To avoid this, only save your trip («Save on your computer screen) when you are far enough from your bike (20 meters) or when your are sure you wheels will not spin any more till your next ride. After 15mn of inactivity, the screen of your Wintech computer turns off and your computer will be switched to sleep mode. Only wake it up a few minutes before the start of your next ride. Immediately recalibrate the altitude (Wintech Ultimate and Alti). Then, plug your computer to your bike and ride.
40 On the altitude graph of my trip, the 2 first dots show 2 widely spread altitude data, whereas the altitude change wasn t so big on my first trip minutes? If the beginning of your graph is as follow (or shows the opposite down curve): You woke up your Wintech computer from sleep mode (screen turns on again) and started your ride immediately, without recalibrating the altitude, and recalibrating after having started your ride. Right after exiting from sleep mode, the computer displays the last known altitude for a few seconds before refreshing it. If the weather has changed or if you left from a different altitude, the altitude saved as the first dot of the graph will be the last one of your last trip. The altitude of the second dot will be the refreshed one. To avoid this, don t forget to recalibrate the altitude before your computer received the sensor signals that will define the start of your ride. For instance, wake up your computer and recalibrate the altitude before plugging it to your bike or before your wheels start spinning. Should you have any doubt, reset your computer again ( Save on your computer s screen) when you are ready to leave. On your Wintech Manager software, you ll then be able to delete the mini-trip resulting from this new save.
PCLinq2 Hi-Speed USB Bridge-Network Cable Congratulations! Quick Network Setup Guide For Windows 98/ME/2000/XP Congratulations for installing the PCLinq2 Hi-Speed USB Bridge-Network Cable. This Quick Network
EigenLight S500 Power Monitor Software Manual Software Installation... 1 Installing S500 Power Monitor Software and LabVIEW Run-time Engine... 1 Install Drivers for Windows XP... 4 Install VISA run-time...
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
Contents Getting Started...1 Check your Computer meets the Minimum Requirements... 1 Ensure your Computer is Running in Normal Sized Fonts... 7 Ensure your Regional Settings are Correct... 9 Reboot your
Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility. 1010537 03 01 10 Section 50 1.0 Background: 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4 1) and Color
DSG SoftPhone & USB Phone Series User Guide Table of Contents Overview Before You Start Installation Step 1. Installing DSG SoftPhone Step 2. Installing USB Phone Step 3. System Check First Time Use Step
Please Install Your EASE Scan Tool DVD Before Installing Any Other Software That Came With Your Package. SECTION I - Installation ATTENTION: Do NOT connect an EASE Vehicle Interface Device to your Computer
XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT
UX3600/NT/NTL/NTS Quick Start Guide This Quick Start Guide will explain how to connect and communicate with the EAW UX3600, NTL720, NTS250, KFNT, and JFNT powered speakers. Table of Contents 1. Downloading
Upgrading Your PhoneTree Software For PhoneTree 2100/2500/3500, VoiceWave Series, Patient/Dental/Veterinary Messaging, and HealthWave models upgrading from 6.12.80 or older to 6.13 or newer Question: How
USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
Installing FileMaker Pro 11 in Windows Before you begin the installation process, please exit other open programs and save your work. Installation notes Before you install FileMaker Pro, review the following
Overview... 20-01 Learning Objectives... 20-01 Transfer Software... 20-01 System Requirements... 20-02 Application Loading... 20-02 Software Installation... 20-03 Migration Process on the Old PC... 20-05
APPLICATION NOTES Converge Pro Products CLEARONE DOCUMENT 801-000-002 (REVISION 1.0) October, 2008. Troubleshooting USB Connections with Converge Pro Units Description This document explains how to connect
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
Quick Start Using DASYLab with your Measurement Computing USB device Thank you for purchasing a USB data acquisition device from Measurement Computing Corporation (MCC). This Quick Start document contains
DCX Vehicle Update Instructions Follow these instructions if you get the message on your Predator that reads: This vehicle needs an update Download here: www.diablosport.com/dcx. This is because the tool
Volume AIG AGKSOFT ActiveSync Inventory Guide ActiveSync Inventory Guide Introduction T he Microsoft ActiveSync or Windows Mobile Device Center can be used to synchronize your Windows PC with your Portable
SmartyManager Driver recovery procedure User manual If, for some reason, an error occurs during the automatic USB driver installation for SmartyCam, Windows should provide with the informational prompt
Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your
How to install USB driver (MICRO/I) HG2G-5S 1. The HG2G-5S USB driver installation wizard will start when Automation Organizer installation is complete. Click the Next button. 2. Read the license agreement
PL-25A1 Hi-Speed USB Easy Transfer Cable User s Guide Manual (For Cable Manufacturer Reference Only Not for End-User Distribution) NOTE: Prolific only supplies the PL-25A1 controller chip, PCLinq3 drivers,
Mercy s Remote Access Instructions ~~~~~~~~~~~~~~ Section A Windows 2000 / XP ~~~~~~~~~~~~~~ I. Install Meditech............................... A1 II. Install VPN Client............................. A3
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
130 LogTag User Guide (1.8) Resolving USB Driver Problems Every USB device requires the appropriate driver files to be installed prior to them being successfully used on a computer. The installation process
AXIS 1650 Set-up Instructions Page 3 Unpack box Verify that you have all the items listed below: LPT1 Printer Connector Network Indicator Ethernet Connector External Power Supply Connector Power Indicator
Author Janice Hong Version 1.0.0 Date Mar. 2014 Page 1/56 How to use the VMware Workstation / Player to create an ISaGRAF (Ver. 3.55) development environment? Application Note The 32-bit operating system
File Management Utility T u t o r i a l Contents System Requirements... 2 Preparing Files for Transfer to GlobalMark... 2 Application Launch... 2 Printer Setup... 2 Communication Status... 4 Communication
OSM 2007 MONITORING SOFTWARE Contents Preparation...3 Software Installation...4 Configuring OSM...6 Connecting a Device...16 Connecting to Station Monitoring Software...19 Troubleshooting...23 Installing
Hi-Speed USB Flash Disk User s Manual Guide System Requirements Windows 98, ME, 2000, XP, Mac OS 10.1, Linux 2.4 or above AMD or Intel Pentium 133MHz or better based computer USB 1.1, USB 2.0 or higher
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
Shearwater Research Dive Computer Software Manual Revision 1.3 Table of Contents 1. Basic overview of components 2. O/S IrDA driver installation 2.1 USB IrDA installation for Windows XP Home/Pro editions
Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication
Installation Instructions Windows USB driver for Installation If a Diagnostic Interface with USB is connected to a PC with a Windows operating system 98, ME, XP or Vista for the first time, it is necessary
Transferring Scans from your Dolphin into Destiny Summary: This article is intended to provide Destiny users with an overview of the following tasks 1. Downloading the Dolphin Transfer Utility to their
LESSON 13 Managing Devices OBJECTIVES After completing this lesson, you will be able to: 1. Open System Properties. 2. Use Device Manager. 3. Understand hardware profiles. 4. Set performance options. Estimated
Printer Support Guide FedEx Ship Manager Software Printer FAQs Installing Printer Drivers How do I download and install the Zebra printer drivers? To download and install the current Zebra printer drivers
Welcome! Welcome to the GMATPrep application. The GMATPrep test-preparation software was designed by the people who created the GMAT exam, to help you get ready to take the test. It includes practice questions
BounceBack Ultimate 14.2 User Guide This guide presents you with information on how to use BounceBack Ultimate 14.2. Contents 1. System Requirements 2. BounceBack Pre-Installation 3. How To Install The
FAQ WINTECH USB The purpose of this document is not to replace the complete user guide delivered on the Wintech Manager s CD. Most of the common question you may have about the use of the Wintech Manager
INSTALLING THE WIFI DONGLE ON WINDOWS VISTA Please note that setting up the WiFi dongle on the Windows Vista operating system differs to that of other Windows systems like XP/ME/2000. Please refer to this
ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please
Parallels Software International, Inc. Parallels Desktop for Mac Quick Start Guide 3.0 (c) 2005-2007 Copyright 2006-2007 by Parallels Software International, Inc. All rights reserved. Parallels and Parallels
GERBER EDGE USB-to-Parallel Option Kit 1 of 9 The USB-to-Parallel Option kit is a possible solution to connect your GERBER EDGE or EDGE 2 to OMEGA 2.5 or higher using a custom USB-to-Parallel cable. Note:
Calibration Kit These instructions provide information on the installation, connection and operation of the Calibration Kit for use with SOR 800 Series pressure products, specifically the 805PT and 805QS.
DataSuite Installation and Activation Guide This document provides a detailed overview of the installation and activation procedure for the DataSuite v126.96.36.199 software. DataSuite allows you to configure
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
Overview Why Bluetooth? There were good reasons to use Bluetooth for this application. First, we've had customer requests for a way to locate the computer farther from the firearm, on the other side of
Nikon Firmware Update for Coolpix 2500 Version 1.1 Notes: 1. It is most important that you follow the supplied directions; failure to follow all of the steps may result in your camera being disabled. 2.
Training Gym Pro Instruction Manual Version 1.0 The instruction manual uses for version 1.2.9 or later. Table of Content 1. How To Install PC Software Application... 3 1.1 Installing the USB driver...3
27 March 2015 Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software Introduction This guide will walk you through the process of transferring data from the FOCUS DL-15 to the computer
SATA+Ultra ATA RAID CONTROLLER RC212 Contents Feature and benefits Package contents System requirement Magic Switch introduction and jumper setting Hardware installation Important message for user RAID
Title: Simple Computer Backup (Win 7 and 8) Author: Nancy DeMarte Date Created: 11/10/13 Date(s) Revised: 1/20/15 Simple Computer Backup This tutorial includes these methods of backing up your PC files:
HTC Hero Android 2.1 Software Update NOTE: THIS IS AN OPTIONAL SOFTWARE UPDATE PROVIDED BY HTC TO UPDATE YOUR HERO FROM ANDROID 1.5 TO ANDROID 2.1. IMPORTANT DISCLAIMER: ALL PERSONAL DATA (CONTACTS, EMAILS,
Getting Started This short guide can help you to quickly start using Acronis True Image Home 2011. It describes just a few of the key features of Acronis True Image Home 2011. For detailed program information,
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance
Contents 1. Introduction 2. How to Install/Uninstall Business Everywhere 3. The Business Everywhere interface 4. Launching Business Everywhere 5. Connection 6. Business Everywhere management tools 7. Troubleshooting
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
support HP MFP Scan Setup Wizard 1.1 Security Level: Customer Verbal Use Date Written/Updated: October 11, 2007 Document Summary a The Scan Setup Wizard is a Windows utility that end users can download
INLINE 5 Software INSTALL BULLETIN Page 2: Installing INLINE 5 Page 6: Removing INLINE 5 NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. IMPROPER INSTALLATION OR USE CAN
Magaya Software Installation Guide MAGAYA SOFTWARE INSTALLATION GUIDE INTRODUCTION Introduction This installation guide explains the system requirements for installing any Magaya software, the steps to
Training Gym Pro Instruction Manual Version 1.2 The instruction manual uses for Training Gym Pro version 1.2.9 or later. Table of Content 1. How to Install PC Software Application... 3 1.1 Installing the
Rogue RE-CONN Utility Rogue s RE-CONN software is a utility that enables remote communication with compatible Rogue devices, using a Windows-based PC and a DCV-0001 data converter. With this utility you
Cesview IIi 1.3 Installation and Automation Guide Contents: New ser Quick Guide Cesview IIi asic Installation o Additional Server Installation Notes o Additional rowser Only (Client) Installation Notes
TA Instruments TRIOS Software Installation Instructions Installation Requirements Your TRIOS Instrument Control software includes all the components necessary to install or update the TRIOS software, as
1.0 USB 2.0 FLASH DRIVE User s Guide & Manual Index Introduction 1 CHAPTER1 Features & Specifications 2 CHAPTER2 System Requirements 4 CHAPTER3 Getting Started Installation of the Windows 98SE Driver 5
Verizon Media Manager Software User Guide Verizon Media Manager is a free software application from Verizon. The application helps you find, organize and manage your photos, videos and music on your PC.
3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System Version 4.2 Software Installation Guide (Upgrade) 1 P age Contents Important Information Read First... 3 Software Download...
HP Photosmart Wireless series - B109 Apply sticker to printer Important! Do NOT connect the USB cable until prompted by the software (Windows users only) 1 Verify box contents 2 Insert the CD for guided
Iridium Extreme TM Satellite Phone Data Services Manual Table of Contents 1 OVERVIEW... 1 2 HOW IT WORKS... 1 3 BEFORE INSTALLING... 2 4 USB DRIVER INSTALLATION... 3 5 MODEM INSTALLATION AND CONFIGURATION...
Revision Update Instructions- Using Legacy Connect Some older versions of Predator software cannot be auto detected by the DS Downloader. Any tool with a revision starting with 7rxx and some older 8rxx