Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software
|
|
- Felix Alexander
- 8 years ago
- Views:
Transcription
1 27 March 2015 Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software Introduction This guide will walk you through the process of transferring data from the FOCUS DL-15 to the computer using the DL Data Download and Processor transfer program. There are 4 steps for the initial transfer of data from the FOCUS DL-15 to the computer. After the initial setup, proceed straight to Step 4 for subsequent downloads. 1) Install the DL Data Download and Processor transfer software onto the computer. 2) Install and load drivers that will allow the FOCUS DL-15 to communicate with the computer. 3) Locate and determine the correct COM port used by DL Data Download and Processor. 4) Transfer data from the FOCUS DL-15 to the computer using the transfer software. 1) Install the DL Data Download and Processor transfer software on the PC Browse to and locate the setup installation program called FOCUS2DL_V2.x.x_Setup.exe. This can be found on the CD that accompanies the FOCUS DL-15. This document is for informational purposes only and is not a legally binding agreement or offer. Spectra Precision makes no warranties and assumes no obligations or liabilities hereunder. Spectra Precision, Westmoor Drive, Westminster, CO 80021, USA 2015, Trimble Navigation Limited. All rights reserved. Spectra Precision is a Division of Trimble Navigation Limited. Spectra Precision and the Spectra Precision logo are trademarks of Trimble Navigation Limited or its subsidiaries. StepDrive is an unregistered trademark of Trimble Navigation Limited. EPOCH and FOCUS are trademarks of Spectra Precision. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license. Windows Mobile is a trademark of Microsoft Corporation, registered in the United States and/or other countries. All other trademarks are the property of their respective owners. Page 1
2 Double click the FOCUS2DL_V2.x.x_Setup.exe program to begin the DL Data Download and Processor installation. Select Next >, then walk through the Setup wizard to complete the installation: Page 2
3 Page 3
4 After the DL Data Download and Processor software has successfully installed on the computer, the program will be available both on the Desktop as a shortcut icon and in the Start Menu located in the DL Data Download and Processor directory. 2) Install and load drivers to the PC to communicate with the FOCUS DL-15 To transfer files from the FOCUS DL-15 to the PC, you need to download driver installation files, then install and configure the FOCUS DL-15 drivers. Note: If you ve previously installed the USB driver that connects the FOCUS DL-15 to the PC, you can advance to step 3 to determine the correct COM port used to transfer files from the FOCUS DL-15. Download driver installation files There are two options to get the FOCUS DL-15 driver. You can either download the latest driver for your PC from the manufacturer s website, or you can use either of the provided driver files on the CD that may be correct for your machine. 1) You can get the latest driver from the manufacturer at: Download the driver, extract the zip file, and then locate the correct driver (either x64 or x86.exe) for your machine. Page 4
5 2) Alternately, you can install the driver for your machine using either of the provided files on the CD. Install and configure the required FOCUS DL-15 drivers Once you have the correct FOCUS DL-15 driver for your machine, start the install wizard and click through the installation process. Page 5
6 The system will indicate Scan during the installation after selecting Install. After a short time files will copy over, then the install will indicate Installation completed successfully. Power on the FOCUS DL-15 and connect to the PC using the provided mini-usb cable. Windows will likely autodetect the hardware then search for the available driver. Page 6
7 After Windows detects and finds the driver for the FOCUS DL-15 it will indicate that it s Ready to use the device. Proceed to step 4 if the device is Ready to use. If Windows does not automatically detect and install the driver, you can use the Device Manager to browse for the device manually then install them through the Device Manager. To open the Device Manager, right click on My Computer and select Properties. Click on Device Manager. You can also get to this location by selecting Control Panel, then System. Page 7
8 You must have the instrument plugged into the computer and it must remain powered on to show up in the Device Manager. Highlight the CP2102 USB device, then select Update Driver Software. Page 8
9 Then select Browse my computer for driver software. Click on the Include subfolders checkbox, then browse to the folder location containing the FOCUS DL-15 drivers, located at the default install location of c:\silabs\mcu\cp210x\windows\. Select OK, then Next. Windows will automatically find and load the appropriate driver, detect the device, then indicate that it s Ready to use. After the driver is successfully selected and loaded, the Device Manager will report that the FOCUS DL-15 as a regular device without the warning symbol. Page 9
10 At this point the FOCUS DL-15 driver has been successfully installed. Keep the FOCUS DL-15 unit powered on and connected to the PC for the next step. 3) Locate and determine the correct COM port 1) To successfully communicate and transfer data from the FOCUS DL-15 using DL Data Download and Processor, you need to determine which COM port your computer is using when connected to the FOCUS DL-15 via the mini-usb cable. 2) To determine the correct COM port, power on the FOCUS DL-15 and connect to the computer using the provided mini-usb cable. After the computer has successfully detected that the device is connected, open up Device Manager, and then browse to the Ports (COM & LPT1) section. The COM port should display in line with the Silicon Labs CP210x USB to UART Bridge. To open the Device Manager, right click on My Computer and select Properties. Click on Device Manager. You can also get to this location by selecting Control Panel, then System. 3) If for some reason the COM resource doesn t display in the Device Manager, you can determine the port by selecting the Advanced button to access the COM Port Number as indicated below. Page 10
11 Make a note of the COM port, then exit Device Manager. 4) Transfer data from the FOCUS DL-15 using DL Data Download and Processor Power on the FOCUS DL-15 to connect to the computer using the provided mini-usb cable, then select and launch the DL Data Download and Processor program from either the Desktop shortcut icon, or from the Start Menu entry which can be found under the DL Data Transfer Software directory. Select the Set COM Param option, and then select the correct Port number for your computer as determined in the previous step. Select OK, then select COM > Receive Data to the point that you see the Click OK button int. Don t select OK yet or the program may time out while waiting for the data. Page 11
12 Go to the FOCUS DL-15 and select following: 1) From the main menu on the digital level, scroll up or down to select 4. Data Manage then press [ENT]. 2) Scroll down to 5. File Output then press [ENT]. 3) Select the type of data that you want to transfer and select the job file that you want to transfer. Once you have the digital level ready to transfer the data, go back to the DL Data Download and Processor transfer software on the computer and click the OK button. The Transfer software is now ready to receive the data. 4) On the FOCUS DL-15 press [ENT] to send the data to the computer. Page 12
13 The data will then be sent to the computer. The data can now be managed as desired from within the program. Page 13
Centurion PLUS CPC4 Download Guide
Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility. 1010537 03 01 10 Section 50 1.0 Background: 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4 1) and Color
More informationWindows XP.. ELITE Firmware Update procedures.. v1.41
Windows XP.. ELITE Firmware Update procedures.. v1.41 Download and Extract the ELITE update. Note.. Please ensure you are logged in to Windows as an Administrator before carrying out the instructions in
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationXConsole GUI setup communication manual September 2010.
XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT
More informationTrimble Handhelds Running Windows Mobile Version 5.0 Software: Connecting a Ricoh Caplio 500SE-W Camera
8 May 2007 Trimble Handhelds Running Windows Mobile Version 5.0 Software: Connecting a Ricoh Caplio 500SE-W Camera This document describes how to connect a Trimble handheld running the Microsoft Windows
More informationInstallation of USB Virtual COM. Version 1.02
Installation of USB Virtual COM Version 1.02 RELEASE NOTES Version Date Notes 1.02 May 13, 2014 Modified: Install USB Virtual COM Drivers files on CD updated 1.01 Dec. 10, 2009 Supports driver for Windows
More informationInstalling the Gerber P2C Plotter USB Driver
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
More informationSupplemental USB Driver Installation Guide
Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your
More informationScanShell.Net Install Guide
ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please
More informationInstalling ABACUS ELECTRICS USB Optical Probes under Windows 7
Installing ABACUS ELECTRICS USB Optical Probes under Windows 7 AN17a This note assumes that you are installing the drivers on to a clean system, i.e. one on which ABACUS ELECTRICS Optical Probe drivers
More informationUX3600/NT/NTL/NTS Quick Start Guide This Quick Start Guide will explain how to connect and communicate with the EAW UX3600, NTL720, NTS250, KFNT, and JFNT powered speakers. Table of Contents 1. Downloading
More informatione-dpp 4.0.2 May 2013 Quick Installation Guide Microsoft Windows 2003 Server, XP, Vista, 7 Access Database
e-dpp 4.0.2 May 2013 Microsoft Windows 2003 Server, XP, Vista, 7 Access Database ELTECHS Engineering and Consulting Co., Ltd., Japan www.eltechs.co.jp Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011
More informationSAPIP GUI INSTALLATION. Table of Contents
QUICK START GUIDE SAPIP GUI INSTALLATION Table of Contents 1. Install CSU cable driver for SapIP..2-3 2. Check for pre-requisite for SAPIP GUI install......2 3. Check for pre-requisite for SAPIP GUI install...2-6
More informationIridium Extreme TM Satellite Phone. Data Services Manual
Iridium Extreme TM Satellite Phone Data Services Manual Table of Contents 1 OVERVIEW... 1 2 HOW IT WORKS... 1 3 BEFORE INSTALLING... 2 4 USB DRIVER INSTALLATION... 3 5 MODEM INSTALLATION AND CONFIGURATION...
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More informationCOMBOGARDPRO. 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS
COMBOGARDPRO 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS IMPLEMENTATION PACKAGE The ComboGard Pro Software implementation package includes: 707012 ComboGard Pro Software Install
More informationSOFTWARE INSTALLATION INSTRUCTIONS
AUDITGARD LGA Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS Implementation Package The AuditGard Software implementation package includes: 707013 AuditGard Software Install CD 42145 Programming/Audit
More informationBioWin Network Installation
BioWin Network Installation Introduction This document outlines the procedures for installing the network version of BioWin. There are three parts to the network version installation: 1. The installation
More informationSUNNY BEAM USB Driver Installing the Sunny Beam USB Driver. 1 Sunny Beam USB Driver. Version: 1.4
SUNNY BEAM USB Driver Installing the Sunny Beam USB Driver Version: 1.4 1 Sunny Beam USB Driver The Sunny Beam USB driver is needed to connect a Sunny Beam to a computer. System requirements: The Sunny
More informationHow to install USB driver (MICRO/I)
How to install USB driver (MICRO/I) HG2G-5S 1. The HG2G-5S USB driver installation wizard will start when Automation Organizer installation is complete. Click the Next button. 2. Read the license agreement
More informationFSU Inventory Scanner Set up & Use for Windows PC
FSU Inventory Scanner Set up & Use for Windows PC FSU Inventory Scanner kit: 1 FSU Property Scanner (Model: CipherLab 8100) 1 Scanner Cradle 1 Scanner Cradle Power Supply 1 USB Cradle to PC Connecter Cable
More informationCODESOFT Installation Scenarios
CODESOFT Installation Scenarios NOTES: CODESOFT is a separate install from existing versions of CODESOFT. You will need to make note of your current settings (default directories, etc.) so you can duplicate
More informationIVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1
Manual IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Supplement connecting USB RF-II Base Station 1213 2 Contents Contents... 3 Connecting the RF-II Base Station to the USB port... 4 Using the
More informationGuide for Remote Control PDA
030.0051.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows 7 Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. Configure PC Software... 4 D. Testing
More informationScanWin Installation and Windows 7-64 bit operating system
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
More informationInstaller Assistance Windows XP
GearBox/TonePort Setup Installer Assistance Windows XP Welcome to the GearBox installation assistance document. This installation process will install the GearBox software, and optionally, device drivers
More informationUSB Driver. Installation Manual
USB Driver Installation Manual Issue 1.00 Detailed guide for the installation of Actisense USB Drivers under the following operating systems: Windows XP / 2000 Windows Vista USB Driver Installation Manual
More informationVirtual COM Port Driver Installation Manual
Virtual COM Port Driver Installation Manual Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the FT-991 transceiver. This will allow computer
More informationMotorola Phone Tools. Quick Start
Motorola Phone Tools Quick Start Contents Minimum Requirements...2 Before Installing Motorola Phone Tools...3 Installing Motorola Phone Tools...4 Mobile Device Installation and Configuration...5 Online
More informationHASP Troubleshooting Guide
HASP Troubleshooting Guide Corporate office: Trimble Geospatial Division 10368 Westmoor Drive Westminster, CO 80021 USA www.trimble.com Copyright and trademarks: 2005-2013, Trimble Navigation Limited.
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB drivers and Microsoft synchronization software for your Pathfinder 6057 printer. You need these utilities for your printer and computer
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Thank you for using the Icom Download Service. Please read this installation guide before installing the USB driver into your PC that is connected to the USB (Universal Serial
More informationTransferring Scans from your Dolphin into Destiny
Transferring Scans from your Dolphin into Destiny Summary: This article is intended to provide Destiny users with an overview of the following tasks 1. Downloading the Dolphin Transfer Utility to their
More informationInstalling PowerLink on Windows 7 64-bit
Instruction Manual Version 1.0, Code No. 20 751 806 1 Introduction... 3 2 Installing Virtual PC... 3 3 Configuring Windows XP Mode... 5 4 Installing Powerlink to Virtual XP... 8 5 Run PowerLink software
More informationHow To Configure CU*BASE Encryption
How To Configure CU*BASE Encryption Configuring encryption on an existing CU*BASE installation INTRODUCTION This booklet was created to assist CU*Answers clients with the configuration of encrypted CU*BASE
More informationGetting TechWizard Version 4 Started Using Excel 2007 or Higher
Getting TechWizard Version 4 Started Using Excel 2007 or Higher This document covers installing, registering, and starting TechWizard in Excel 2007 or higher. Please note that TechWizard is registered
More information16.4.3 Lab: Data Backup and Recovery in Windows XP
16.4.3 Lab: Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment The
More informationProcedure for updating Firmware of EZ4 W or ICC50 W
Procedure for updating Firmware of EZ4 W or ICC50 W 1. Download the Firmware file for your camera to your PC 2. Download the Leica Camera Configuration program to your PC 3. Install Leica Camera Configuration
More informationJava. How to install the Java Runtime Environment (JRE)
Java How to install the Java Runtime Environment (JRE) Install Microsoft Virtual Machine (VM) via System Check Install Sun Java Runtime Environment (JRE) via System Check Loading Java Applet Failed How
More informationPrinter Support Guide. FedEx Ship Manager Software
Printer Support Guide FedEx Ship Manager Software Printer FAQs Installing Printer Drivers How do I download and install the Zebra printer drivers? To download and install the current Zebra printer drivers
More informationTE100-P21/TEW-P21G Windows 7 Installation Instruction
Hardware Installation TE100-P21/TEW-P21G Windows 7 Installation Instruction 1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to your desktop. 2. Right click
More informationCONFIGURING MICROSOFT SQL SERVER REPORTING SERVICES
CONFIGURING MICROSOFT SQL SERVER REPORTING SERVICES TECHNICAL ARTICLE November/2011. Legal Notice The information in this publication is furnished for information use only, and does not constitute a commitment
More informationThe following items are trademarks or registered trademarks of Kaba Mas in the United States and/or other countries. GITCON
The Gitcon Access Management Software Installation Guide is a publication of Kaba Mas LLC (hereinafter Kaba Mas). No part of this book may be reproduced or transmitted in any form or by any means, electronic
More informationSiI3132 SATARAID5 Quick Installation Guide (Windows version)
SiI3132 SATARAID5 Quick Installation Guide (Windows version) Document Number: DOC-003132-204 Version 1.0 Copyright 2005, Silicon Image, Inc. All rights reserved. No part of this publication may be reproduced,
More informationIridium Satellite Phonebook Tool Version H2PT0901 User Guide v3.2
Iridium Phonebook Tool Version H2PT0901 User Guide Iridium Satellite Phonebook Tool Version H2PT0901 User Guide v3.2 May 6, 2013 Iridium Subscriber Equipment Firmware Engineering Table of Contents 1 PURPOSE...
More informationUSA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS
USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS For Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS SECTION 1: ADAPTER CABLE CONNECTION INSTRUCTIONS... 2 SECTION
More informationPP8X Printer Driver Installation Instruction
PP8X Printer Driver Installation Instruction Pinnacle Technology Corp. CONTENTS 1 BT Device Installation... 1 2 Printer Driver Installation... 6 3 How to Know the Connecting Port... 10 4 How to Configure
More informationSMS Database System Quick Start. [Version 1.0.3]
SMS Database System Quick Start [Version 1.0.3] Warning ICP DAS Inc., LTD. assumes no liability for damages consequent to the use of this product. ICP DAS Inc., LTD. reserves the right to change this manual
More informationCenturion C4 Transfer Guide using C4 File Transfer Utility
Centurion C4 Transfer Guide using C4 File Transfer Utility 1010536 02 23 11 Section 50 1.0 Background: 1.1 A valid configuration is required for the Centurion system. Configuration files are downloaded
More informationKI6501 Data Manager. Software User Manual
KI6501 Data Manager Software User Manual CONTENTS 1. Installation of USB Virtual COM Port driver software... 2 2. Installation of KI6501 Manager Software... 2 3. Connecting KI6501 to PC (Personal Computer)
More informationUsing the Microsoft Bluetooth Stack
Using the Microsoft Bluetooth Stack Microsoft s Service Pack 2 for Windows XP includes its own Bluetooth stack. The stack has limited support for Bluetooth applications compared to other Windows-based
More informationVirtual COM Port Driver Installation Manual
Virtual COM Port Driver Installation Manual Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an enabled transceivers. This
More informationGuide for Remote Control PDA
030.0035.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows XP Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. ActiveSync Software Configuration...
More information10.3.1.6 Lab - Data Backup and Recovery in Windows XP
5.0 10.3.1.6 Lab - Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment
More informationDriver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5
Driver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5 124 Gaither Drive - Suite 140 - Mount Laurel, NJ 08054 USA Tel: 800-289-6367 Fax: 856-222-4726
More informationInstallation Instructions for 9555 USB Driver
Prior to using the data modem features of your 9555 handset; you must first install the VCOMPORT 9555 USB Driver. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4,
More informationInstalling the USB driver for Firmware 7 or later For use with E-blocks programmer boards and PICmicro Development boards.
Installing the USB driver for Firmware 7 or later For use with E-blocks programmer boards and PICmicro Development boards. Matrix Multimedia USB PICmicro programmer boards with Firmware version 7 or later
More informationPIGCHAMP MOBILE. PigCHAMP Knowledge Software. Installation Guide for Mobile Units
PIGCHAMP MOBILE PigCHAMP Knowledge Software Installation Guide for Mobile Units Table of Contents: Important Note:... 4 Chapter 1: PC Setup... 5 A. Install PigCHAMP Mobile Manager on Windows XP...5 B.
More informationPlena Voice Alarm System Firmware update
Plena Voice Alarm System Firmware update 1. Introduction It is advised to update a Bosch Plena Voice Alarm System with the latest released firmware. This Application Note describes how a firmware update
More informationInstalling Global Logger USB Drivers
Installing Global Logger USB Drivers For 32-bit Windows 8, skip to the section labeled, Continue with Driver Installation. For 64-bit Windows 8, start the process here. At the time of this writing, the
More informationNetwork Server for Windows. Overview of the Sequencher Network Page 2. Installing Sequencher Server for the First Time Page 3
Network Server for Windows Installation Instructions Overview of the Sequencher Network Page 2 Installing Sequencher Server for the First Time Page 3 Adding Sequencher licenses to KeyServer Page 4 Updating
More informationAIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
More informationDUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
More informationBefore installing the Zebra printer with USB connector, download the drivers from www.zebra.com.
Download the Zebra Drivers 1 Download the Zebra Drivers Before installing the Zebra printer with USB connector, download the drivers from www.zebra.com. Note: You must first create an account on Zebra.com
More informationHow to install FlexiCAD 3
How to install FlexiCAD 3 This document explains how to install FlexiCAD 3 in four situations, using the master CD: 1. On a stand-alone computer 2. On a network using Group Policy 3. On a ghost station
More informationThe FlexiSchools Online Order Management System Installation Guide
The FlexiSchools Online Order Management System Installation Guide Installation Pack Welcome to the FlexiSchools system. You will have received a disc containing: Zebra Drivers FlexiSchools Online Order
More informationInstalling S500 Power Monitor Software and LabVIEW Run-time Engine
EigenLight S500 Power Monitor Software Manual Software Installation... 1 Installing S500 Power Monitor Software and LabVIEW Run-time Engine... 1 Install Drivers for Windows XP... 4 Install VISA run-time...
More informationInstallation Assistance... 3. Windows/Microsoft Updates... 3. Updating from Spectra 7.0.1 or 7.1... 4. Upgrading from Spectra 6.x...
Spectra 7.1.1/Access 2010 Windows Upgrade Installation Instructions Installation Assistance... 3 Windows/Microsoft Updates... 3 Updating from Spectra 7.0.1 or 7.1... 4 Important Notices... 4 Downloading
More informationMidland BT Updater BTUpdater Program Program file (x86) ), Midland
Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed
More informationOMEGA STUDIO SOFTWARE INSTALLATION GUIDE
OMEGA STUDIO SOFTWARE INSTALLATION GUIDE USB Device Drivers, Cubase LE Setup, and Pantheon Reverb Plug-in for Windows XP Cubase LE Setup and Pantheon Reverb Plug-in for Mac OS X Congratulations on your
More informationLepide Active Directory Manager
Installation Guide Lepide Active Directory Manager , All Rights Reserved This User Guide and documentation is copyright of Lepide Software Private Limited, with all rights reserved under the copyright
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Please read this installation guide before installing the USB driver. This installation guide describes how to install the USB driver included in the Icom product s CD. If
More informationHow To Install Database Oasis On A Computer Or Computer (For Free)
INSTALLATION INSTRUCTIONS Table of Contents Installation Instructions 1 Table of Contents 1 System Requirements 2 Installation 3 Selecting where to Install the Professional Server 3 Installing Prerequisites
More informationPnP Driver Installation
PnP Driver Installation Plug & Play Driver Installation Manual For AD/DA, DI/DO Cards [For Windows 95/98/2000/XP] Warranty All products manufactured by ICP DAS are warranted against defective materials
More informationThe following pages will help you to solve issues linked to the installation and first use of the Wintech Manager software and Wintech USB computer.
WINTECH MANAGER FAQ The purpose of this document is not to replace the complete user guide delivered on the Wintech Manager s CD. Most of the common question you may have about the use of the Wintech Manager
More informationBlastmate III and Minimate Plus USB to PC Cable (Part No. 716A3401)
Purpose This technical bulletin describes the installation of the Blastmate III and Minimate Plus USB to PC Cable (Part No. 716A3401). Refer to Image A. This cable allows the Blastmate III and Minimate
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB and Microsoft ActiveSync synchronization software for your Monarch Pathfinder Ultra Platinum 6039 printer and computer to communicate.
More informationTech Tips Helpful Tips for Pelco Products
DX4104 UPDATING FROM THE NETWORK SERVER October 29, 2009 DX4104 UPDATING FROM THE NETWORK SERVER The Operation/Configuration manual provides users an option for updating the server through the network
More informationMetrologic Barcode Scanner Desktop Installation
Metrologic Barcode Scanner Desktop Installation There is only one model of portable scanner that can be used with SMART Metrologic Optimus S SP5500 (Worldwide Technology P/N MK5502-79B639). It is highly
More informationSetting up a networked printer on a local PC
Setting up a networked printer on a local PC The following document is a guide on how to set up a networked printer on a local PC. In order to complete the task, you will need the following information/resources:
More information[Setup procedure for Windows 95/98/Me]
[Setup procedure for Windows 95/98/Me] a. One Print Server. b. One external AC power adapter. c. One setup CD. (For Windows 95/98/Me/NT/2000/XP). d. One user s manual (included quick guide). a. Turn off
More informationRDC-7 Windows XP Installation Guide
RDC-7 Windows XP Installation Guide CONTENTS 1. End User License Agreement...3 2. Important notes...4 3. Customer support...4 4. Installing the USB driver...4 I. Prior to installation...4 II. Installation
More informationUsing the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges
Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges 1. USB and Serial Communication Ports: Newer DG-700 and DG-500 gauges contain both a USB and a DB-9 Serial Communication Port,
More informationSelect Correct USB Driver
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
More informationINSTALLING AND USING ENTEL PROGRAMMER IN WINDOWS 7 Technical Support Bulletin
INSTALLING AND USING ENTEL PROGRAMMER IN WINDOWS 7 Rev 1.1 Technical Support Bulletin 1 GENERAL DESCRIPTION: Due to the structural changes in Windows 7 compared to previous Windows versions the following
More informationTable of Contents. 2 Getting Started Guide
Table of Contents Welcome... 3 Training & Support... 3 Accessing the online support center... 4 1. System Requirements... 5 2. Installing the Free Evaluation Version... 7 3. Software Download Instructions...
More informationRunning the R4 Software on a USB Port
Tech Note Running the R4 Software on a USB Port Like a lot of other engine management software programs that have been around for a while, the R4 program is designed to communicate through a 9-pin serial
More informationInstallation of the USB to RS 485 Converter
Installation of the USB to RS 485 Converter Contents CONTENTS 1 GENERAL INSTRUCTIONS 1 HINT 1 INSTALLATION USING SETUP EXECUTABLE (RECOMMENDED INSTALLATION PROCEDURE) 2 INSTALLATION BY PLUGGING IN THE
More informationPrint Server Application Guide
Print Server Application Guide TD W8968 TD W8970 / TD W8970B TD W8980 / TD W8980B Rev: 1.0.0 1910010772 Contents Overview...1 Installation for Windows OS...2 Application for Windows OS...7 How to launch/exit
More informationInstallation and Connection Guide to the simulation environment GLOBAL VISION
Installation and Connection Guide to the simulation environment GLOBAL VISION Hardware and Software Requirements The following hardware specification is recommended for client machines: 2 GHz Pentium class
More informationDirectOut Technologies
Installation Guide for USB Control This document is divided into three sections: Installation D.O.TEC USB Serial Driver Installation D.O.Update Firmware Update It refers to D.O.TEC products: D.O.TEC MADI.SRC
More informationDell Statistica 13.0. Statistica Enterprise Installation Instructions
Dell Statistica 13.0 2015 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or
More informationInstructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity.
The simple and reliable way to measure radioactivity. Instructions for the installation of drivers and data reading software (TOOLBOX 4) EN 06/2015 2015 GAMMA-SCOUT GmbH & Co. KG Instructions for Driver
More informationNOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT.
INLINE 5 Software INSTALL BULLETIN Page 2: Installing INLINE 5 Page 6: Removing INLINE 5 NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. IMPROPER INSTALLATION OR USE CAN
More informationCS SoftDent Practice Management Software Installation Guide for Client/Server Configurations
DE1005-15 CS SoftDent Practice Management Software Installation Guide for Client/Server Configurations Notice Carestream Health, Inc., 2012. No part of this publication may be reproduced, stored in a retrieval
More informationHow do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?
How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router
More informationOperating Instructions
Operating Instructions (For Setting up the Printer Driver and the Panasonic Document Management System) Digital Imaging Systems Model No. DP-800P / 800E / 806P Installation Table of Contents Installation
More informationConnecting your Blackberry to Aliant Hosted Exchange. Instructions for connecting Blackberry hand-held devices to Aliant Hosted Exchange
Instructions for connecting Blackberry hand-held devices to Aliant Hosted Exchange 1 Table of Contents: BLACKBERRY 7750/6750 VERSIONS 3.7188 OR 3.6... 3 1. Verify the configuration of Outlook on the PC
More informationNon-ThinManager Components
Non-ThinManager Components Microsoft Terminal Servers play an important role in the ThinManager system. It is recommended that you become familiar with the documentation provided by Microsoft about their
More informationhow to synchronise your contacts
how to synchronise your contacts The mobile satellite company installing the contact synchronisation tool The contact synchronisation tool enables you to transfer contact information between your PC and
More information