1 SOFTWARE MANUAL Please ensure that you read the instruction manual carefully before use Software Notes The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyright for the software is licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use. Using a Hand-made PC or a PC that has not been guaranteed by a manufacturer is not covered by the Samsung warranty. Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems). Windows is a registered trademark of Microsoft. Macintosh, Mac is the registered trademark of Apple computer, USA. About software USB Storage Driver This camera uses a USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. USB Storage Driver is provided only for Windows. USB Driver for MAC is not included with the Application CD. But you can use the camera with Mac OS 9.0~ Digimax Viewer You can view the stored images in the CF CARD directly on the PC monitor. And you can copy, move, delete the image and scale up /downscale the image size with Digimax Viewer. For windows only. MGI PhotoSuite SE Image editing program for downloaded images. For Windows only.
2 HOW TO SET UP THE SOFTWARE FOR WINDOWS How to set up the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following frame is automatically run. 1. Driver : This enables images to transfer between the camera and PC. Driver installation for Windows : refer to page Image Viewer : Digimax Viewer. Refer to page Application : MGI PhotoSuite SE : image editing program. Refer to page Web Site Link : You can visit the Samsung web-site through the internet. : English : Korean Reference If you insert application CD for Digimax 340 in the CD-ROM drive, all the Digimax 410 text will be changed to Digimax 340 Check the system requirements (page 83) before setting up the driver. You should allow 5~10 seconds for running the automatic setup program according to the capability of the computer. If the frame does not show, run the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root directory. SOFTWARE
3 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up USB driver for Windows To use this camera with a PC, install the Camera Driver first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 1 Click [Storage Driver] menu on the Autorun frame and the Welcome Window will open. Click [Next >]. 2 [Storage Driver] installation has started. 3 Installation is complete. Restart your computer.
4 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up USB driver for Windows 4 After restarting the computer, connect the PC to the camera with the USB cable. 5 Turn the camera power on with the mode dial set on PC mode. [Found New Hardware Wizard] will appear and the computer will recognize the camera. 6 USB Driver installation is complete. After installation, [Removable Disk] will be displayed under [My computer] as shown alongside. Note Before connecting the camera to the PC, you must install the camera driver. After driver installation, you have to restart the computer. If the camera is connected to PC before Driver installation, [Add Found New Hardware Wizard] will appear. In this case, follow [Add Found New Hardware Wizard] to install the camera driver. When windows search for new drivers in its database on your hard drive, select [Driver Setup] folder by browsing the Application CD. Should the computer not find the Camera Driver after installation, please try one or more of the following measures. 1. Delete the camera driver, and re-install the driver. 2. Refer to FAQ(refer to page 115) to check for a possible solution to the problem. If your PC s central processing unit is VIA Chip (This is shown in the USB Host Controller), download the patch file from the Samsung Camera web page. ( SOFTWARE
5 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up DirectX 8.1 for Windows DirectX is a windows technology that enables higher performance in graphics and sound when you re playing games or watching video on your PC. 1 After driver installation, [Microsoft DirectX 8.1 Setup] window will open automatically. Click [Yes]. 2 The software license agreement window will open. If you agree to it, click [Yes]. This will take you to the next step. If you disagree, click [No] and the installation program will be canceled. 3 [DirectX 8.1] installation has started.
6 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up DirectX 8.1 for windows 4 Your system will be updated. 5 Installation is complete. Restart your computer. SOFTWARE
7 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up Digimax Viewer This software is only compatible with Windows. 1 Click [Digimax Viewer] on the Autorun frame. 2 The installation window will be displayed as shown alongside. Click [Next]. 3 The Software License Agreement window will display. If you agree to it, click [Yes]. This will take you to the next step. If you disagree, click [No] and the installation program will be canceled. 4 Select destination folder and click [Next].
8 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up Digimax Viewer 5 Select Program folder and click [Next]. 6 The setup status window will be displayed. 7 Installation is completed. If you wish to open this program automatically whenever the camera connects to PC, click [I would like to launch Digimax Viewer] Checkbox. And click [Finish]. SOFTWARE
9 HOW TO SET UP THE SOFTWARE FOR WINDOWS Setting up the MGI PhotoSuite lll SE This software is only compatible with Windows. 1 Click the MGI PhotoSuite lll SE menu on autorun frame. 2 Select language. 3 A Welcome window will be displayed. Click [Next >] to move to the next step. 4 The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [ No ] and the installation program will be canceled.
10 HOW TO SET UP THE SOFTWARE FOR WINDOWS 5 Select setup type and click [Next] Full : the program will be installed with all the options. Custom : you can choose what you would like to install. 6 Start Copying Files window will be displayed. Click [Next >] to start installation. 7 The MGI Registration window will be displayed before completing installation. Register : send your personal information to MGI for registration. Cancel : postpone registration. SOFTWARE
11 HOW TO SET UP THE SOFTWARE FOR WINDOWS 8 Installation is complete. If installation is completed correctly, Autoplay is registered automatically into the start menu program as shown alongside.
12 CONNECTING THE CAMERA FOR WINDOWS Connecting USB cable to the Camera for Windows To download images, you will need Windows 98 or later and a USB port on your computer. 1 Connect the USB cable to the USB port on the computer. 2 Connect the other end of the USB cable to the USB connection terminal on the camera. 3 Set the mode dial to PC mode ( ). 4 Switch the camera on. Removable Disk To use this camera as a Removable Disk, install the USB Driver. 1 Before turning the camera power on, connect the camera to the PC with the USB cable and rotate the mode dial to PC mode. 2 Click [Removable Disk] under [My computer] or [Windows Explorer]. 3 Image files stored in the Removable Disk can be transferred to the PC. SOFTWARE
13 REMOVABLE DISK Note Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. When uploading images from the PC to the camera, ensure that the uploaded file names are not the same as those already stored on the CF CARD. Files with the same file name but different extensions (e.g : S jpg/S avi), JPG file format will appear first. And if the displayed file is deleted, all the same file name images are deleted. When you upload a file that is not taken by this camera to Removable Disk, the ERROR FILE message will be displayed on the LCD monitor in PLAY mode, and nothing is displayed in THUMBNAIL mode. The green lamp next to the viewfinder will blink, when a file is transferred (copy or deletion) between the PC and camera. Do not remove the USB cable or rotate the mode dial until the lamp stops blinking. To remove the USB cable, use the [Unplug or Eject Hardware] icon on the task bar. In Windows 2000, take extra care, as the following may occur. 1. When an image file from the Removable Disk is deleted : The green lamp will blink for about 10 seconds after file deletion is completed. 2. When an image file is transferred between PC and Removable Disk : The green lamp will blink again seconds after the first time when it blinks. The work is not completed until the lamp has finished blinking. When uploading the sound recorded image to the camera, you should upload both WAV and JPG files. For example, if you upload S wav file to the camera, the S jpg file has to be uploaded too.
14 HOW TO USE THE SOFTWARE Digimax Viewer This software is only compatible with Windows. To open Digimax Viewer, click the [ Start Programs Samsung Digimax Viewer 1.0 Digimax Viewer 1.0 ] and Digimax Viewer 1.0 will then open. The stored images will be displayed as thumbnail image. You can easily copy, move and delete the stored images. If the Auto Launch option is selected, the program will execute automatically after recognizing the camera. SOFTWARE Refer to [Help] menu in Digimax viewer for further information.
15 HOW TO USE THE SOFTWARE MGI PhotoSuite SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs MGI PhotoSuite lll SE MGI PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open.
16 HOW TO USE THE SOFTWARE MGI PhotoSuite SE An introduction to the Welcome screen Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun, creative and interesting ways. Organize Organize your photos and other media files into albums. Share Save your results to show to others. Print SOFTWARE Print hard copies of photos and projects.
17 HOW TO USE THE SOFTWARE Introduciton to the navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways. Organize Organize your photos and other media files into albums. Share Save your results to show to others. Print Print hard copies of photos and projects. Browse Browse the web site.
18 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE GET : Get images To obtain images from the computer 1 To acquire images, Click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2 The Open file selector is displayed. Now select the image file and click [open]. 3 The Welcome screen will change to the next work step, with the selected image displayed. SOFTWARE
19 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE When you obtain images from the digital camera. Note When you connect a PC to the Camera, use the following sequence : 1. Turn the Mode dial to PC mode. 2. Turn the power on. 3. Connect the USB cable. Refer to page 95 for more information about connecting the cable. 1 To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2 The Open file selector is displayed. Click [Look in :] to choose [Removable Disk( :)] and click [open] for the open file window to be displayed.
20 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE 3 Select [Dcim -> 100sscam] folder. Then select image and click [Open]. 4 The Welcome screen will change to the next work step, with the selected image displayed. Note When you use the Digimax camera, only [Computer] and [Album] from the list of options displayed are available. You will be able to obtain images from the digital camera. SOFTWARE [Computer and Album Only]
21 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE Acquiring images from an Album. 1 To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Album] from the list of options displayed on the activity panel. 2 After selecting Album on the [ Choose a photo album], click an image in the album and click [Open]. 3 The Welcome screen will change to the next work step, with the selected image displayed. Refer to page 108 for more information about creating an Album.
22 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE PREPARE When the image is loaded, the step changes to Prepare automatically. Menu for the [PREPARE] step Rotate & Crop You can rotate, flip or crop images along with a host of others. Touchup Remove Red eye, Remove Scratches etc.. are available in this menu. Special Effects A number of special effects can be applied. Stitching Join a series of photos together to create a sweeping panoramic effect. SOFTWARE
23 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE COMPOSE Add Text, Compound Images etc.. are available in this step. Menu for the [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts activity includes many collage and layout options. Cards & tags : Use your photos to create items such as Gift Tags, Greeting Cards, Invitations, Postcards, and Sports Cards. Calendars : Use your photos to create a variety of calendars (monthly, quarterly, seasonal, yearly). Collections : Photos can also be used to create a variety of items for business purposes. Add frames and boarder effects to your photos with the predefined templates.
24 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE ORGANIZE Organize your photos and other media files into albums. Menu for the [ORGANIZE] step Choose a photo album to view or edit Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album.. : Open Master Album. Select a photo, and choose an action below. Open : Open selected image. Delete : Delete selected image. Properties.. : view image information. Choose an action to manage your album. Add : click [Add] to add an image to an Album. Sort : click [Sort] to Sort saved images. Search : click [Search] to Search saved images. Reset : click [Reset] to reset the setting. Update : click [Update] to update images. Create Slide Show.. : click [Create Slide Show] to create a Slide Show. Always start on this page : If you select this option, the program will start in [Organize]. SOFTWARE
25 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE Creating an Album 1 To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2 Click [Album..] in [ Choose a photo album to view or edit.] 3 The Master Album window will be displayed, then click [New..]. 4 Enter a new Album name in the New Album window and click [OK]. A new album will now be created.
26 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE SHARE Saving images 1 Saving or sharing images. Menu for the [SHARE] step Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send ing images. Slide Show Viewing images as a slide show. 2 Click [SAVE] and the Save Project window will be displayed. Enter the file name and click [Save] to save an image. SOFTWARE
27 HOW TO USE THE SOFTWARE MGI PhotoSuite lll SE PRINT Printing images 1 You can print images. Menu for the [PRINT] step Print Printing images. Print Multiples Print multiple copies of a photo or project, or one copy of each of the photos included in an album, according to a predefined template. 2 Choose a printer, an orientation, the print size, and the number of copies. You can then print the images. Reference For more information, please refer to the Help file in [Help MGI PhotoSuite lll help].
28 REMOVING THE USB DRIVER FOR WINDOWS Removing USB Driver for Windows 1 Click [Add/Remove programs] in Controller. 2 After selecting [Samsung Digimax 410], click [Add/Remove] and the following window will be displayed. SOFTWARE
29 REMOVING THE USB DRIVER FOR WINDOWS Reference If you are a Windows 2000/ME/XP user, follow the procedure below to remove the USB Driver. 1. Connect the PC to the camera (PC mode, power on) 2. As mentioned above, remove [Samsung Digimax 410] in [Add/Remove programs] 3. Click [Unplug or Eject Hardware] icon on the task bar. Click [Stop] on the [Unplug or Eject Hardware] window and click [Ok] on the next window. 4. Click [System] on Control Panel. Trace [Device Manager Universal serial bus controller Samsung USB Mass Storage Device] and click the right mouse button. Then the following window will be displayed. Click [Remove] to remove the USB Driver. Restart the computer
30 CONNECTING THE CAMERA FOR MAC Connecting the USB cable to the camera for MAC The USB port has to be in the Macintosh or keyboard. 1 Connect the USB cable to the USB port on the Macintosh. 2 Connect the other end of the USB cable to the USB port of the camera. 3 Rotate the mode dial to PC mode ( ). 4 Switch the camera on. SOFTWARE
31 HOW TO INSTALL AND USE THE USB DRIVER FOR MAC Setting up the USB Driver for MAC 1 The USB Driver for MAC is not included with the Application CD as MAC OS support the camera driver. 2 Check MAC OS. This camera is available in MAC OS 9.0~ Note Before connecting the camera to MAC, check that the CF CARD is inserted in the card slot. 3 Connect the camera to the Macintosh and turn the camera power on in PC mode. 4 A new icon (Untitled) will be displayed on the desktop after connecting the camera to the MAC. Using a USB Driver for MAC 1 Double click a new icon (Untitled) on the desktop and the folder in the CF CARD will be displayed. 2 Select an image file and copy or move it to MAC.
32 FAQ About USB Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. If you use batteries, check the battery condition. [Case 2] The mode dial is not set to PC mode. Rotate the mode dial to PC mode. PC interfacing is available only in PC mode. [Case 3] USB Driver is not installed correctly. Install the USB Driver correctly. Refer to pages 86 [Case 4] The USB cable is not connected or you are using a cable with an incorrect specification. Use a USB cable with the correct specification. [Case 5] The CF CARD is not inserted or the camera can t recognize the CF CARD. Turn the camera power off and insert the CF CARD again. [Case 6] Occasionally the computer recognizes the USB as another device. Install the camera driver correctly. Turn the camera power off and remove the USB cable. Connect the USB cable again and turn the camera power on. Then the computer should now recognize the camera. SOFTWARE
33 FAQ About USB [Case 7] There is an unexpected error during file transfer. Turn the camera power off and on again. Transfer the file again. [Case 8] How do I know my computer supports a USB Interface? Check the USB port in your computer or keyboard. Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME.XP. Check [Universal serial bus controller] in Device Manager. Do the following to check [Universal serial bus controller]. Win 98/ME : Trace [start setting controller system Device Manager Universal serial bus controller]. Win 2K : Trace [start setting controller system Hardware Device Manager Universal serial bus controller]. Win XP : Trace [start Control Panel Performance and Maintenance system Hardware Device Manager Universal Serial Bus controller]. There must be USB Host Controller and USB root hub under [Universal serial bus controller]. When all the conditions mentioned above are met, the computer can support the USB interface. [Case 9] When using USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly. [Case 10] Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera.
Caplio Utility for Windows Operation Manual English To ensure correct use of the product, read this manual carefully before use. Keep the manual handy for future use. Introduction Thank you for purchasing
Windows XP Home Edition / Windows XP Professional COOLPIX5000/995/885/775 This manual is for those users of the COOLPIX5000/995/885/ 775 who are running Nikon View 4 (Version4.3.1) under Windows XP Home
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
CONVERTER DRIVE (Secure Digital Card Reader-Writer) ITEM NUMBER: CR-35TD Thank You! Thank you for purchasing the Digital Concepts Converter Drive. By inserting a Secure Digital card into your Converter
Windows XP Home Edition / Windows XP Professional D1 Series This manual is for those users of D1 Series cameras who are running Nikon View 4 (Version4.3.1) under Windows XP Home Edition / Professional.
How to Download Images Using Olympus Auto-Connect USB Cameras and Olympus Master Introduction Auto-Connect USB is a feature that allows Olympus digital cameras to emulate a Hard disk drive when connected
Running Nikon View 4 under Windows XP (Home Edition/Professional) Installing Nikon View 4 Step 2 For information on installing Nikon View 4, see the Nikon View 4 Installation Click System to open the System
Windows XP Home Edition / Windows XP Professional COOLPIX990/880 This manual is for those users of the COOLPIX 990/880 who are running Nikon View 4 (Version4.3.1) under Windows XP Home Edition / Professional.
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
USB Cameras and Windows XP TroubleShooting Below is a short, step by step, way to get our cameras to work with Windows XP Home and Office editions. After connecting the camera to the computer as per the
MP3 and Photo Viewer 1.0 Instructions Contents Software Requirements Installing The Software Getting Started Running Juice Box Software Downloading Music or Pictures Ripping Music from CDs Using your Selections
PL-25A1 Hi-Speed USB Easy Transfer Cable User s Guide Manual (For Cable Manufacturer Reference Only Not for End-User Distribution) NOTE: Prolific only supplies the PL-25A1 controller chip, PCLinq3 drivers,
EXTERNAL HARD DRIVE Maxtor OneTouch User's Guide TM II P/N:20259600 i Contents 1 Introduction................................................. 1 Maxtor OneTouch II Drive Components............................
Photo Loader Version 1.1 CASIO LCD Digital Camera Image Loading Software Macintosh version Instruction manual B K851PSM4DMX-E Macintosh is a trademark of Apple Computer Inc. CompactFlash and the logo are
VISIONEER USB 2.0 12 IN 1 CARD READER/WRITER USER MANUAL INDEX Trademarks --------------------------------------------------------------------- 2 Introduction --------------------------------------------------------------------
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
PL27A1 SuperSpeed USB 3.0 Easy Transfer Cable User s Manual Microsoft Windows Easy Transfer PCLinq5 for Windows version PCLinq5 for Mac OS X version Document number:an-27140201 Revision:0.2 Release Date:June
Overview Downloading Images and Movies from a Digital Camera to OLYMPUS Master 2 This article describes how to download image and movie files from an Olympus digital camera 1 to the OLYMPUS Master 2 application.
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
Verizon Media Manager Software User Guide Verizon Media Manager is a free software application from Verizon. The application helps you find, organize and manage your photos, videos and music on your PC.
EPSON Stylus COLOR 740 TM USB Software Installation Guide (Windows 98/iMac ) USB Setup Guide (imac) This guide includes USB setup instructions for your imac computer, as well as software installation instructions
USB Video/Audio Capture Device for PC and Mac Quick Installation Guide Introduction The USB Video/Audio Capture Device for PC and Mac captures your videos from VCRs, camcorders and more, and converts them
ViviCam 25 Digital Camera User s Manual 2010 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the
Digital Photo Bank / Portable HDD Pan Ocean E350 User Manual Installing a hard disk 1. Power off the unit. 2. Remove the bottom cover from the unit by removing four screws. 3. Insert the 2.5 HDD to the
Hi-Speed USB Flash Disk UFD Utility User s Manual For AP v22.214.171.124 Release For Windows 98/ME/2000/XP Version 1.1B (08/27/2004) Contents Contents...1 Introduction...1 Features & Specifications...2 System
Captureboard C-20 Series PLUS C-20 Software Software Operation Manual We greatly appreciate your purchase of this PLUS Corporation product. In order to take full advantage of the features of the PLUS C-20
Firmware Update Instruction Manual This manual explains the procedures for downloading the CX2 firmware from the Ricoh website and updating the camera s firmware. Perform the following operations to update
USB FLASH DRIVE User s Manual USB 2.0 Compliant Version A10-1 - Version A10 Introduction Thank you for purchasing the USB FLASH DRIVE device. The manual explains how to use the USB FLASH DRIVE software
SOFTWARE INSTALLATION AND USB CONNECTION GUIDE ENGLISH LYT1306-001A COPYRIGHT 2004 VICTOR COMPANY OF JAPAN, LTD. JVC SOFTWARE LICENSE AGREEMENT M4D3/D2 NT DSC Printed in Malaysia 0204HOH-ID-VM IMPORTANT
File Management Utility T u t o r i a l Contents System Requirements... 2 Preparing Files for Transfer to GlobalMark... 2 Application Launch... 2 Printer Setup... 2 Communication Status... 4 Communication
For ClassPad Series E Screen Capture User s Guide CASIO Education website URL http://edu.casio.com ClassPad website URL http://edu.casio.com/products/classpad/ ClassPad register URL http://edu.casio.com/dl/
For Windows XP Users Setting Up the machine and PC to Work Together Before You begin When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).
Guest PC for Mac OS X Version 1.6 User Guide Copyright 1996-2005 Lismore Software Systems, Ltd. All rights reserved. Table of Contents About Guest PC... 1 About your Virtual Computer... 1 Creating a Virtual
EVERBRITE DISPLAY EDITOR INSTALLATION & USER GUIDE FOR WINDOWS & MAC OPERATING SYSTEMS Revision B Issue Date: June 1, 2015 Table of Contents 1. GENERAL USAGE NOTES... 3 2. INSTALLATION WINDOWS OPERATING
Installing Your Multifunction to Additional Computers on Your Network PIXMA MG4220 Macintosh OS 1 Installing Your Multifunction to Additional Computers on Your Network PIXMA MG4220 Macintosh OS Preparing
SOFTWARE INSTALLATION AND PC CONNECTION GUIDE ENGLISH LYT1315-001A COPYRIGHT 2004 VICTOR COMPANY OF JAPAN, LTD. JVC SOFTWARE LICENSE AGREEMENT M4D6 Printed in Japan 0604HOH-ID-VP IMPORTANT TO CUSTOMERS:
Anoto pendocuments User s Guide Copyright 1997 2009 Anoto AB. All rights reserved. Anoto, Magic Box and the Anoto logotype are trademarks owned by Anoto AB. All other trademarks are the property of their
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
CONTENTS INTRODUCTION...1 Driver Installation...3 Windows 98SE... 3 Windows ME/2000/XP...11 Make Sure Installation Successfully...15 Windows 98SE/ME... 15 Windows 2000/XP... 16 Driver Un-installation...17
Setup Guide Disclaimer The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this document
IMPORTANT! You need to reinstall EPSON Image Authentication System (IAS) on your camera if it was installed before your camera was repaired. Please see your EPSON Image Authentication System User s Guide
Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's
ViviCam 5024 Digital Camera Owner Manual 2009 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the
Installing the USB driver for Firmware 7 or later For use with E-blocks programmer boards and PICmicro Development boards. Matrix Multimedia USB PICmicro programmer boards with Firmware version 7 or later
USB Mobile Port Replicator with Ethernet NOTEBOOK COMPUTER MOBILE PORT REPLICATOR User s Guide INTRODUCTION Congratulations on your purchase of the Targus USB Mobile Port Replicator with Ethernet! It is
RDC-7 Windows XP Installation Guide CONTENTS 1. End User License Agreement...3 2. Important notes...4 3. Customer support...4 4. Installing the USB driver...4 I. Prior to installation...4 II. Installation
Belkin USB Flash Drive Model F5U025 User Guide Belkin USB Flash Drive Overview Storing and moving data has never been easier. Introducing the Belkin USB Flash Drive. Simply plug the Flash Drive into the
USB VoIP Phone Adapter User s Manual FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 68 of the FCC Rules.
USB2.0 EASY IDE ADAPTER INDEX Trademarks ---------------------------------------------------------------------------- Introduction ---------------------------------------------------------------------------
Index 1. Introduction... 1 2. Installation of USB to Serial Converter Under Windows 98SE... 2 3. Installation of USB to Serial Converter Under Windows ME.... 6 4. Installation of USB to Serial Converter
Copyright 2010 Vantec Thermal Technologies. All Rights Reserved. User s Manual Package Contents: 1 NextStar FX Gigabit NAS Adapter x1 2 AC Adapter x1 3 Installation Guide x1 4 Rubber Feet x4 5 User s CD
Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed
PN-L702B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Version 2.1 Contents Setting up the PC...3 Installing the touch panel driver...3 Touch Panel Settings...4 How to configure settings...4 Calibration...5
User Guide HUAWEI UML397 Welcome to HUAWEI 1 Huawei UML397 4G LTE Wireless Modem User Manual CHAPTER 1 BEFORE USING YOUR UML397 WIRELESS MODEM ABOUT THIS USER MANUAL...4 WHAT S INSIDE THE PRODUCT PACKAGE...4
FUJITSU HANDYDRIVE DATA (USB-2) EDITION USER'S MANUAL INDEX Important Update...3 1. INTRODUCTION...5 1.1. General unit description...5 1.2. Connecting the HandyDrive to a computer...6 1.3. Connecting the
EPSON USB/Parallel Adapter User s Guide for the EPSON Stylus COLOR 440, EPSON Stylus COLOR 640, EPSON Stylus COLOR 600 and EPSON Stylus Photo EX IMPORTANT: To use the USB/Parallel Adapter with your Apple
EasySuite User Guide V1.0 1 Launch EasySuite...3 Stop the EasySuite:...4 System Requirements...5 EasyCopy...6 Function Description...7 File Transfer...9 EasyMover...12 Function Descriptions of EasyMover...12
Nikon Firmware Update for Coolpix 5000 Version 1.7 Notes: 1. It is most important that you follow the supplied directions; failure to follow all of the steps may result in your camera being disabled. 2.
Software User's Guide Brother QL-series The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice
1.0 USB 2.0 FLASH DRIVE User s Guide & Manual Index Introduction 1 CHAPTER1 Features & Specifications 2 CHAPTER2 System Requirements 4 CHAPTER3 Getting Started Installation of the Windows 98SE Driver 5
PLUS TV ANALOG USB STICK Installation Manual Contents V1.2 Chapter 1 : PLUS TV ANALOG USB STICK Hardware Installation...2 1.1 Package Contents...2 1.2 System Requirements...2 1.3 Hardware Installation...2
User s Manual REVOLTEC CARDMAGIC USB 2.0 Card Reader/Writer with 3-port Hub for CompactFlashTM Card Type I & II, IBM MicrodriveTM, Memory Stick, Memory Stick PRO, MultiMediaTM Card, SecureDigitalTM Card,
User s Manual Ver 1.17r Table of Contents 1 Introduction 1.1 About USB Disk Drive 2 1.2 Features 3 2 How to Install / Remove 2.1 Before running setup 4 2.2 Windows 98 / Windows 98 SE Installation 5 2.3
Yamaha 01V96 Version2 Upgrade Guide This document explains how to upgrade the 01V96 system software to V2.00 or later. Precautions (please be sure to read these precautions) The user assumes full responsibility
Install Device Drivers and Toolkit for Windows 7 The USB driver is required for all installations to assure that the computer communicates with the digitizer. Note: Installation instructions for Windows
Multi-function Front Panel USB2.0/Firewire 400/eSATA Model No.: UGT-IH100 Installation Guide v1.01 1 Prescribed Use The UGT-IH100 is designed to be installed into the 3.5 or 5.25 plug-in unit of a computer
USB DVR Starter Guide You must install the software bundled on the Install CD before connecting the USB DVR to the computer. 1 Install the software Connect the USB DVR to 2 the computer. This guide explains
Quick Start Guide Vodafone Mobile Connect USB Stick Welcome 2 What can I do with it? 3 Set up your USB Stick 4 Run the software 5 Configuration 6 Make a connection 7 USB Stick status 7 Other settings 8
EPSON USB/Parallel Adapter User s Guide EPSON Stylus COLOR 440 EPSON Stylus COLOR 1520 EPSON Stylus COLOR 600 EPSON Stylus COLOR 3000 EPSON Stylus COLOR 640 EPSON Stylus Photo 700 EPSON Stylus COLOR 660
TASER AXON System End-to-End Deployment Guide This document provides step by step instructions for set-up, deployment, and use of the AXON flex and AXON body camera systems in conjunction with the EVIDENCE.com
NVIDIA Graphics Card and Driver Installation Guide (Windows NT 4.0 and Windows 2000) Revision 2.1 March 1, 2001 Published by NVIDIA Corporation 3535 Monroe Street Santa Clara, CA 95051 Copyright 2001 NVIDIA
HIGH SPEED SERIAL CONTROLLER INSTALLATION GUIDE DIG-729 DOC-002 Rev. 1.1 Copyright 2006 All Rights Reserved Med Associates, Inc. P.O. Box 319 St. Albans, Vermont 05478 www.med-associates.com - ii - TABLE
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
Corsair Flash Voyager USB 2.0 Flash Drive UFD Utility User s Manual Contents For AP v126.96.36.199 Release For Windows 98/ME/2000/XP Version 1.1B (08/27/2004) Contents...1 Introduction...1 Features & Specifications...2
NEC USB 2.0 Version 1.0 Contents 1.0 USB Port Features.P.3 2.0 System Requirement.P.3 3.0 Driver Limitations..P.3 4.0 Driver Installation (W indows XP).P.4 5.0 Driver Installation (Windows 2000).P.10 6.0
NEC Versa Installing the NEC SoftDVD Player Congratulations on purchasing the NEC Versa DVD-ROM drive with the NEC SoftDVD Player! The DVD-ROM drive features the latest in DVD-ROM technology. It is fully
USB TO SERIAL CONVERTER User Manual (DA-70155) Index: A. USB-Serial Cable B. USB-Serial Converter C. How driver works with Modem on Linux RedHat 7.3 A. USB-Serial Cable 1. Product Features 2. System Requirements
15 Digital Photo Frame Instructional Manual aluratek.com mnl M10054 ADMPF315F Copyright 2011 Aluratek, Inc. All Rights Reserved. Table of Contents Frame Close-up... Remote Control Close-up... Package Contents...
USB 3.0 to HDMI/DVI Dual Display Adapter Installation Guide Introduction The USB 3.0 to HDMI/DVI Dual Display Adapter lets you easily and quickly add dual displays to your USB 3.0 enabled system. Key Features
Basic System requirement: OS: Windows XP (Home or Professional) Processor speed: preferred 2GHz or more RAM: 256MB minimum Communication using: For HC1-x controller: Serial Com port-1 (built-in to computer
GearBox/TonePort Setup Installer Assistance Windows XP Welcome to the GearBox installation assistance document. This installation process will install the GearBox software, and optionally, device drivers