High Precision TCXO / VCTCXO Oscillators
|
|
- Annice Hart
- 7 years ago
- Views:
Transcription
1 Available at Digi-Key** High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: Fax: US Headquarters: European Headquarters: Description: The Connor-Winfield s T0/T200 and the TV0/TV200 series have very high frequency stability with excellent phase noise performance. Available in a x7mm surface mount package. These TCXO's and VCTCXO's through the use of Analog Temperature Compensation are capable of holding sub 0-ppb or 200-ppb stabilities over the commercial or industrial temperature ranges. The surface mount package is designed for highdensity mounting and is optimum for mass production. Applications: Basestation, Communications,DSL / ADSL, Femtocell, IP Timing, LTE, Precision GPS, SONET / SDH, WiMAX / WiBro, WLAN. T200V MHZ Features: Models: T0 / T200-Series TV0 / TV200-Series Package T0-T200 Series x 7mm Pad TV0-TV200 Series x 7mm Pad Frequencies Available:, 12.8, 1.2, 20.0, 2.76 or 0.0 MHz. Vdc Operation Output Logic: LVCMOS Frequency Stability: T0 / TV0: +/-0 ppb, 0 to 70 C T200 / TV200: +/-200 ppb, -0 to 8 C Fixed Frequency - TCXO Optional Control Voltage - VCTCXO Low Jitter <0.0 ps RMS Low Phase Noise Tri-State Enable/Disable: Available on T0 / T200 Models. Tape and Reel Packaging RoHS Compliant / Lead Free Absolute Maximum Ratings Storage Temperature -0-8 C Supply Voltage () Vdc Input Voltage (Vc) Vdc Ordering Information T 200 V M Type / Package TCXO / VCTCXO Series T =.0x7.0 mm Pads TV =.0x7.0 mm Pads Frequency Stability and Temperature Range 0 = ±0 ppb, 0 to 70 C 200 = ±200 ppb, -0 to 8 C Supply Voltage =. Vdc Output Logic = LVCMOS TCXO or VCTCXO F = TCXO V = VCTCXO Output Frequency Frequency Format -xxx.xm Min -xxx.xxxxxxm Max *Amount of numbers after the decimal point. M = MHz Example: Part Number Page 1 of 6 T0F-01.2M = x7mm pad package, ±0 ppb, 0 to 70 C,. Vdc, LVCMOS Output, TCXO, 1.2 MHz T200V-020.0M = x7mm pad package, ±200 ppb, -0 to 8 C,. Vdc, LVCMOS Output, VCTCXO, 20.0 MHz TV0F-0.0M = x7mm pad package, ±0 ppb, 0 to 70 C,. Vdc, LVCMOS Output, TCXO,.0 MHz TV200V-012.8M = x7mm pad package, ±200 ppb, -0 to 8 C,. Vdc, LVCMOS Output, VCTCXO, 12.8 MHz
2 Phone: Fax: Operating Specifications Available Output Frequencies (Fo).0, 12.8, 1.76, 1.2, 20.0, 2.76, 2.0, and 0.0 MHz Frequency 2 C ppm 1 Frequency Stability (See Ordering Information for full part number) Model T0x, TV0x -0-0 ppb 2 Model T200x, TV200x ppb 2 Frequency vs. Load Stability ppm ±% Frequency vs. Voltage Stability ppm ±% Static Temperature Hysteresis ppm Freq. shift after reflow soldering ppm Long Term Stability ppm Aging per Life (20 Years) ppm per Day -0-0 ppb per Second -.6E-1 Operating Temperature Range (See Ordering Information for full part number) Model T0x, TV0x 0-70 C Model T200x, TV200x -0-8 C Supply Voltage () Vdc Supply Current (Icc) ma Jitter: Period Jitter ps RMS Integrated Phase Jitter (12K to 20M) ps RMS 6 SSB Phase Noise for Fo=.0 1 Hz offset Hz offset Hz offset KHz offset KHz offset KHz offset MHz offset dbc/hz Start-Up Time - - ms Control Voltage Input Characteristics Control Voltage V Frequency Pullability ± - - ppm Control Voltage Slope Positive Slope Monotonic Linearity - - % Input Impedance 0K - - Ohm Modulation Bandwidth (db) - - KHz Page 2 of 6
3 Phone: Fax: Enable /Disable Input Characteristics (Pad 8) (Models T0F, T200F, T0V and T200V Only) Enable Input Voltage -(Vih) 70% - - Vdc 7 Disable Input Voltage - (Vil) - - 0% Vdc 7 Function Low: High or Open: Output Disabled (High Impedance) Enabled LVCMOS Output Characteristics Load (CL) pf 8 Voltage (High) (Voh) 0% - - Vdc (Low) (Vol) - - % Vdc Duty Cycle at 0% of 0 % Rise / Fall Time % to 0% - 8 ns Package Package Characteristics Hermetically sealed ceramic package with grounded metal cover Environmental Characteristics Vibration: Vibration per Mil Std 88E Method Test Condition A. Shock: Mechanical Shock per Mil Std 88E Method Test Condition B. Soldering Process: RoHS compliant lead free. See soldering profile on page 2. Notes: 1. Initial 2 C. ±2 C, for VCTCXO's Vc = 1.6V. Specifications at time of shipment after 8 hours of operation. 2. Frequency stability vs. change in temperature. [±(Fmax-Fmin)/2.Fo]. For VCTCXO's - Vc -= 1.6V. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 2 C. Two consecutive reflows after 1 hour 2 C.. Frequency drift over 1 2 C. 6. BW = 12 KHz to Fo/2 MHz 7. Leave Pad 8 on models, T0F, T200F, T0V, T200V unconnected if enable / disable function is not required. When tri-stated, the output stage is disabled but the oscillator and compensation circuit are still active (current consumption < 1 ma). 8. Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is required that the circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of approximately 20 ppb per pf load difference. Page of 6
4 Phone: Fax: T0/T200 Package Outline T0/T200 Suggested Pad Layout T0/T200 Pad Connections Pin (0.762mm) ( Places) 0.08 (0.6mm) ( Places) ± (7.0mm) T200V MHZ Bottom View (2.mm) 0.17 ± (.0mm) 0.02(6 Places) (0.6mm) 0.0 (2.mm) 0.07 Max. (2.0mm) 0.00 (1.02mm) (6 Places) Dimensional Tolerance: ±.00 (.127mm) ±.02 (.08mm) 0.21 (.6mm) 0.07 (0.mm) (7.mm) 0.00 (0.76mm) (1.28mm) Keep Out Area 0.01 (1.28mm) * Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane. 1: Do Not Connect 2: Do Not Connect : Do Not Connect : : Output 6: Do Not Connect 7: Do Not Connect 8: Enable / Disable : Supply Voltage ( : VCTCXO: Control Voltage (Vc) TCXO: N/C T0/T200 and TV0/TV200 Series Alternate Package Outline ±0.006 (7.0mm) T MHZ 0.17 ±0.006 (.0mm) 0.0 (2.mm) Alternate package applies to all part numbers at select frequencies. The differences are the top view crystal size, and the overall height. Bottom view, suggested pad layout, and pad connections all remain the same as above. TV0/TV200 Package Outline TV0/TV200 Suggested Pad Layout TV0/TV200 Pad Connections Pad (0. 0mm) ( Places) ± (7.0mm) TV0F MHZ () 1 2 (Bottom View) 0.17 ± (.0mm) 0.07 Max. (2.0mm) Dimensional Tolerance: ±.00 (.127mm) ±.02 (.08mm) 0.0 ( 1.0mm) ( Places) 0.16 (.2mm) () (.7mm) (1.8mm) Places 0.07 (1.2mm) Places Keep Out * Area * Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane. 1: VCTCXO: Voltage Control (Vc) TCXO: N/C 2: : Output : Supply () Page of 6
5 Comprehensive Drive Phone: Fax: T0 / T200 Design Recommendations T0 / T200 Test Circuit, should have Connect a 0.01uF bypass capacitor <0.1 (2.mm) from the pad (0.2mm) Recommended clearance inductance for internal copper flood. 0 Ohm trace <1 by design Buffer Enable/ Disable DNC DNC 1, should have Supply Voltage pf Output TOP LAYER GROUND LAYER OSC 0 Ohm Trace Without Output Vias Buffer 0.1 uf nf TCXO = N/C VCTCXO = Vc DNC DNC DNC DNC = Do Not Connect BOTTOM LAYER TV0 / TV200 Design Recommendations TV0 / TV200 Test Circuit, should have Connect a 0.01uF bypass capacitor <0.1 (2.mm) from the pad (0.2mm) Recommended clearance inductance for internal copper flood., should have TOP LAYER GROUND LAYER OSC 0 Ohm Trace Without Output Vias Buffer 0 Ohm trace <1 by design Buffer Supply Voltage 0.1 uf nf TCXO = N/C VCTCXO = Vc pf Output BOTTOM LAYER Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is required that the circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of approximately 20 ppb per pf load difference. Page of 6
6 Phone: Fax: LVCMOS Output Waveform Phase Noise Information 1V/Div Solder Profile x7 mm Tape and Reel Information Temperature 260 C 260 C 220 C 180 C 10 C 120 C 1 0 Up to 120 s Typical s 60 to 0 s Typical Meets IPC/JEDEC J-STD-020C Revision History Revision Date Changes A00 12/0/11 Advanced information data sheet released A01 0/2/12 Added 12.8 MHz and +/-0ppb 0 to 70 C Models 02 0/26/12 Updated integrated phase jitter to 0. ps RMS nominal. 0 /12/12 Removed M series 0 01/0/1 Updated phase noise information 0 02/0/1 Updated to 2.76 MHz and 0.0 MHz Frequencies 06 06/1/16 Input Voltage, Frequency vs Load and Voltage Stability edits Page 6 of 6
Configurable High Performance SMD TCXO/VCTCXO
ESD Sensitive OVERVIEW: temperature compensated Crystal Oscillators are designed to accommodate a broad breadth of Precision TCXO requirements, without NRE and extended lead-times. This oscillator series
More informationVT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
More informationVS-500 Voltage Controlled SAW Oscillator
VS-500 Voltage Controlled SAW Oscillator Features Improved High Performance ASIC Industry Standard Package, 9 x 14 x 4.5 mm Frequencies from 155 MHz to 850 MHz 3.3 V or 5.0 V Operation At 155.52 MHz, Jitter
More informationVS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720
VS-702 Voltage Controlled SAW Oscillator Previous Vectron Model VS-720 VS-702 Description The VS-702 is a SAW Based Voltage Controlled Oscillator that achieves low phase noise and very low jitter performance.
More informationICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
More informationPECL and LVDS Low Phase Noise VCXO (for 65-130MHz Fund Xtal) XIN XOUT N/C N/C CTRL VCON (0,0) OESEL (Pad #25) 1 (default)
Reserved BUF BUF 62 mil OESEL^ Reserved Reserved PL520-30 FEATURES 65MHz to 130MHz Fundamental Mode Crystals. Output range (no PLL): 65MHz 130MHz (3.3V). 65MHz 105MHz (2.5V). Low Injection Power for crystal
More informationDSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
More informationFXU P C 5 1 5 R 156.25 Frequency (in MHz) Resolutions to 6 places past the decimal point 1 = 1.8V 2 = 2.5 V 3 = 3.3 V
LVPECL 5 x 3.2mm 1.8V Oscillator Features Model: FXU-PC51 SERIES Freq: 0.016 MHz to 670 MHz Rev. 05/27/2015 ULTRA Low Jitter Low Cost XPRESS Delivery Frequency Resolution to six decimal places Stabilities
More informationLow-Jitter I 2 C/SPI Programmable Dual CMOS Oscillator
eet General Description The DSC2111 and series of programmable, highperformance dual CMOS oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
More informationICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
More informationLOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
More informationFeatures. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
More informationIf there is any doubt about the results, measurement shall be made within the following limits : Ambient temperature 25±3 Relative humidity 40%~70%
APPROVED : Tin SHEET : 2 of 10 Standard atmospheric conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurement and tests are as follow : Ambient temperature
More informationTRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
More informationTitle: Low EMI Spread Spectrum Clock Oscillators
Title: Low EMI oscillators Date: March 3, 24 TN No.: TN-2 Page 1 of 1 Background Title: Low EMI Spread Spectrum Clock Oscillators Traditional ways of dealing with EMI (Electronic Magnetic Interference)
More informationApplication Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
More informationSPECIFICATION PRODUCT NAME: VOLTAGE CONTROLLED CRYSTAL OSCILLATOR CSX-750V
Messrs. PAGE 1/10 DATE NO. SPECIFICATION PRODUCT NAME: VOLTAGE CONTROLLED CRYSTAL OSCILLATOR TYPE: CSX-750V FREQUENCY: MHz PARTS NO.: CITIZEN WATCH CO., LTD. 1-12, Honcho 6-chome, Tanashi-shi, Tokyo 188-8511
More informationSPREAD SPECTRUM CLOCK GENERATOR. Features
DATASHEET ICS7152 Description The ICS7152-01, -02, -11, and -12 are clock generators for EMI (Electro Magnetic Interference) reduction (see below for frequency ranges and multiplier ratios). Spectral peaks
More informationTypical Performance 1. IS-95C ACPR 21.0 - - - dbm WCDMA ACLR - 19.5 18.5 - dbm
Device Features OIP3 = 45.0 dbm @ 1900 MHz Gain = 15.0 db @ 1900 MHz Output P1 db = 27.5 dbm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package
More informationLVDS 3.2 x 2.5mm 3.3V Oscillator
LVDS 3.2 x 2.5mm 3.3V Oscillator Features XTREMELY Low Jitter Low Cost XPRESS Delivery Frequency Resolution to six decimal places Stabilities to ± 25 PPM -20 to +70 C or -40 to +85 C operating temperatures
More informationPerformance Specifications
MT-9560A Ultra-Low Power, Ultra-Small 32.768 khz MEMS TCXO Features 32.768 khz ±5 ppm frequency stability over temp Operating temperature ranges: 0 C to +70 C and -40 C to +85 C Package:1.5 x 0.8 mm CSP
More informationAdvanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
More informationMASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information
Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package
More informationSpread Spectrum Clock Generator
Spread Spectrum Clock Generator DESCRIPTION is a clock generator for EMI (Electro Magnetic Interference) reduction. The peak of unnecessary (EMI) can be attenuated by making the oscillation frequency slightly
More information4 OUTPUT PCIE GEN1/2 SYNTHESIZER IDT5V41186
DATASHEET IDT5V41186 Recommended Applications 4 Output synthesizer for PCIe Gen1/2 General Description The IDT5V41186 is a PCIe Gen2 compliant spread-spectrum-capable clock generator. The device has 4
More informationICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-01 Description The ICS650-01 is a low-cost, low-jitter, high-performance clock synthesizer for system peripheral applications. Using analog/digital Phase-Locked Loop (PLL) techniques,
More informationLow Phase Noise XO (for HF Fund. and 3 rd O.T.) XIN XOUT N/C N/C OE CTRL N/C (0,0) Pad #9 OUTSEL
Reserved BUF BUF 62 mil Reserved Reserved FEATURES 100MHz to 200MHz Fund. or 3 rd OT Crystal. Output range: 100 200MHz (no multiplication). Available outputs: PECL, or LVDS. OESEL/OECTRL for both PECL
More informationNTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
More informationMXD7202G/H/M/N. Low Cost, Low Noise ±2 g Dual Axis Accelerometer with Digital Outputs
Low Cost, Low Noise ±2 g Dual Axis Accelerometer with Digital Outputs MXD7202G/H/M/N FEATURES Low cost Resolution better than 1 milli-g Dual axis accelerometer fabricated on a monolithic CMOS IC On chip
More information2 TO 4 DIFFERENTIAL PCIE GEN1 CLOCK MUX ICS557-06. Features
DATASHEET 2 TO 4 DIFFERENTIAL PCIE GEN1 CLOCK MUX ICS557-06 Description The ICS557-06 is a two to four differential clock mux designed for use in PCI-Express applications. The device selects one of the
More informationDRM compatible RF Tuner Unit DRT1
FEATURES DRM compatible RF Tuner Unit DRT1 High- Performance RF Tuner Frequency Range: 10 KHz to 30 MHz Input ICP3: +13,5dBm, typ. Noise Figure @ full gain: 14dB, typ. Receiver Factor: -0,5dB, typ. Input
More informationICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
More informationApplication Note 58 Crystal Considerations for Dallas Real-Time Clocks
www.maxim-ic.com Application Note 58 Crystal Considerations for Dallas Real-Time Clocks OVERVIEW This application note describes crystal selection and layout techniques for connecting a 32,768Hz crystal
More informationPush-Pull FET Driver with Integrated Oscillator and Clock Output
19-3662; Rev 1; 5/7 Push-Pull FET Driver with Integrated Oscillator General Description The is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in
More informationKit 27. 1W TDA7052 POWER AMPLIFIER
Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a
More informationHI-200, HI-201. Features. Dual/Quad SPST, CMOS Analog Switches. Applications. Ordering Information. Functional Diagram FN3121.9
Data Sheet FN3121.9 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200 240ns,
More informationHow To Use A Sound Card With A Subsonic Sound Card
!"## $#!%!"# &"#' ( "#' )*! #+ #,# "##!$ -+./0 1" 1! 2"# # -&1!"#" (2345-&1 #$6.7 -&89$## ' 6! #* #!"#" +" 1##6$ "#+# #-& :1# # $ #$#;1)+#1#+
More informationPS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323
Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to
More informationApplication Note 58 Crystal Considerations with Dallas Real Time Clocks
www.dalsemi.com Application Note 58 Crystal Considerations with Dallas Real Time Clocks Dallas Semiconductor offers a variety of real time clocks (RTCs). The majority of these are available either as integrated
More informationHigh Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
More informationDATA SHEET. SiGe LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS. Part Number Order Number Package Marking Supplying Form
DESCRIPTION The μpc8tk is a silicon germanium (SiGe) monolithic integrated circuit designed as a low noise amplifier for GPS and mobile communications. The package is -pin lead-less minimold, suitable
More informationLDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
More informationINTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
More informationINTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: MFSH615712-100
SURFACE MOUNT MODEL: MFSH6572 65-72 MHz FEATURES: Small Size, Surface Mount (.6" x.6") Low Phase Noise Standard Programming Interface Ultra Wide Tuning Range Lead Free - RoHS Compliant Patented REL-PRO
More information4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More informationPhotolink- Fiber Optic Receiver PLR135/T1
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc823tu SiGe:C LOW NOISE AMPLIFIER FOR GPS DESCRIPTION The μpc823tu is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise
More informationSi510/511. CRYSTAL OSCILLATOR (XO) 100 khz TO 250 MHZ. Features. Applications. Description. Functional Block Diagram. Si5602
CRYSTAL OSCILLATOR (XO) 100 khz TO 250 MHZ Features Supports any frequency from 100 khz to 250 MHz Low jitter operation 2 to 4 week lead times Total stability includes 10-year aging Comprehensive production
More informationV CC TOP VIEW. f SSO = 20MHz to 134MHz (DITHERED)
19-013; Rev 1; 10/11 0MHz to 13MHz Spread-Spectrum General Description The is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-based, digital electronic equipment. Using an
More informationMADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
More informationSpread Spectrum Clock Generator AK8126A
Features Output Frequency Range: 22.5MHz 32MHz, 45 MHz 64MHz 90MHz 128MHz Configurable Spread Spectrum Modulation: - AKEMD s Original Spread Spectrum Profile - Modulation Ratio: Center Spread: ±0.25%,
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
More informationPrecision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
More informationSupertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
More informationAS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
More information3 V/5 V Low Power, Synchronous Voltage-to-Frequency Converter AD7740*
a FEATURES Synchronous Operation Full-Scale Frequency Set by External System Clock 8-Lead SOT-23 and 8-Lead MSOP Packages 3 V or 5 V Operation Low Power: 3 mw (Typ) Nominal Input Range: 0 to V REF True
More informationSN54HC157, SN74HC157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SNHC, SNHC QUADRUPLE 2-LINE TO -LINE DATA SELECTORS/MULTIPLEXERS SCLSB DECEMBER 982 REVISED MAY 99 Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers
More informationSpread-Spectrum Crystal Multiplier DS1080L. Features
Rev 1; 3/0 Spread-Spectrum Crystal Multiplier General Description The is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs
More informationINTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)
More informationSKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated
DATA SHEET SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated Applications WiMAX 802.16 RF1 RF2 Dual-band WLANs (802.11 a/b/g/n) LTE/4G systems 50 Ω 50 Ω Features 50 Ω matched RF ports in all
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationSymbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
More informationReal Time Clock Module with I2C Bus
Moisture Seitivity Level: MSL=1 FEATURES: With state-of-the-art RTC Technology by Micro Crystal AG RTC module with built-in crystal oscillating at 32.768 khz 3 timekeeping current at 3 Timekeeping down
More informationSMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode
DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems
More informationDG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES
Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed
More informationNOT RECOMMENDED FOR NEW DESIGNS
28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression
More information1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET
DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock
More informationPIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
More informationSTLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc8tk SiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS DESCRIPTION The μpc8tk is a silicon germanium carbon (SiGe:C) monolithic integrated circuit
More informationMAAD-007084-0001TB. Digital Attenuator 15.5 db, 5-Bit, TTL Driver, DC-2.0 GHz Rev. V2. Features. Schematic with Off-Chip Components.
MAAD-007084-00000 5.5, 5-Bit, TTL Driver, DC-2.0 GHz Rev. 2 Features Attenuation: 0.5 Steps to 5.5 Low DC Power Consumption Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel
More informationRail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
More informationPowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
More informationMAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
More informationSKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKYA2112: 2 MHz to 6. GHz GaAs SPDT Switch Automotive Applications INPUT Infotainment Automated toll systems Output1 Output2 Garage door opener 82.11 b/g/n WLAN, Bluetooth systems Wireless control
More informationCLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
More informationEVALUATION KIT AVAILABLE Single-Chip Global Positioning System Receiver Front-End BIAS CBIAS GND GND RFIN GND GND IFSEL
19-3469; Rev 2; 4/08 EVALUATION KIT AVAILABLE Single-Chip Global Positioning System General Description The complete single-chip global positioning system (GPS) RF front-end utilizes many innovative and
More informationHIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
More informationhandbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
More informationLM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
More informationMADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.
Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound
More informationTSL213 64 1 INTEGRATED OPTO SENSOR
TSL 64 INTEGRATED OPTO SENSOR SOES009A D4059, NOVEMBER 99 REVISED AUGUST 99 Contains 64-Bit Static Shift Register Contains Analog Buffer With Sample and Hold for Analog Output Over Full Clock Period Single-Supply
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationAP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
More informationDATA SHEET. TDA1543 Dual 16-bit DAC (economy version) (I 2 S input format) INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 February 1991 FEATURES Low distortion 16-bit dynamic range 4 oversampling possible Single 5 V power supply No external components required
More informationThis application note is written for a reader that is familiar with Ethernet hardware design.
AN18.6 SMSC Ethernet Physical Layer Layout Guidelines 1 Introduction 1.1 Audience 1.2 Overview SMSC Ethernet products are highly-integrated devices designed for 10 or 100 Mbps Ethernet systems. They are
More informationVCO Phase noise. Characterizing Phase Noise
VCO Phase noise Characterizing Phase Noise The term phase noise is widely used for describing short term random frequency fluctuations of a signal. Frequency stability is a measure of the degree to which
More informationRF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. 0.
Receiver AC-RX2/CS RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. Pin-out 38.1 3 Component Side 1 2 3 7 11 13 14 15
More informationFUNCTIONAL BLOCK DIAGRAM 3V TO 5V (ADC REF) ST2 ST1 TEMP V RATIO SELF-TEST @ 25 C MECHANICAL SENSOR AC AMP CHARGE PUMP AND VOLTAGE REGULATOR
Data Sheet FEATURES Complete rate gyroscope on a single chip Z-axis (yaw rate) response 2 /hour bias stability.2 / second angle random walk High vibration rejection over a wide frequency 1, g powered shock
More informationSmall, Low Power, 3-Axis ±3 g Accelerometer ADXL335
Small, Low Power, 3-Axis ±3 g Accelerometer ADXL335 FEATURES 3-axis sensing Small, low profile package 4 mm 4 mm 1.45 mm LFCSP Low power : 35 μa (typical) Single-supply operation: 1.8 V to 3.6 V 1, g shock
More informationOMNIYIG. .5 TO 2 GHz, 1 TO 4 GHz, 6 to 18 GHz Thin Film YIG-TUNED OSCILLATORS OUTLINE DIMESIONS MOUNTING SURFACE GND +15V + TUNE - HTR HTR
. TO Hz, 1 TO Hz, to 1 Hz Thin Film YITUNED OSCILLATORS Highly Reliable StateoftheArt ThinFilm Technology s. to 1 Hz oscillators employ thinfilm technology, coupled with aas FET transistors, and were designed
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationC650 and C850 Series TBU High-Speed Protectors
*RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection
More informationSpin Semiconductor FV-1 Reverb IC PN: SPN1001. Delay Memory DSP CORE. ROM and Program Control PLL. XTAL Drvr XTAL. Spin.
Featuring Virtual Analog Technology PN: SPN1001 FEATURES Integrated stereo ADC and DAC 8 internal demonstration programs + 8 external programs Easy customization with external EEPROM 3 potentiometer inputs
More information2.5 A Output Current IGBT and MOSFET Driver
VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for
More informationSpecification. SGP.18c. Part No. SGP.1575.18.4.C.02. Product Name. GPS SMT Patch Antenna. Feature
SGP.18c Specification Part No. SGP.1575.18.4.C.02 Product Name GPS SMT Patch Antenna Feature 18mm*18mm*4.5mm 1575MHz Centre Frequency Patent Pending RoHS Compliant SPE-11-8-138/E/SS page 1 of 12 1. Introduction
More informationDS2187 Receive Line Interface
Receive Line Interface www.dalsemi.com FEATURES Line interface for T1 (1.544 MHz) and CEPT (2.048 MHz) primary rate networks Extracts clock and data from twisted pair or coax Meets requirements of PUB
More informationY.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
More information28 Volt Input - 40 Watt
Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function
More informationWide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER
Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER FEATURES HIGH GAIN-BANDWIDTH: 35MHz LOW INPUT NOISE: 1nV/ Hz HIGH SLEW RATE: V/µs FAST SETTLING: 24ns to.1% FET INPUT: I B = 5pA max HIGH OUTPUT
More information