SUBHEAD-I: POINT WIRING & SUBMAIN WIRING. Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
|
|
- Laurence French
- 7 years ago
- Views:
Transcription
1 SUBHEAD-I: POINT WIRING & SUBMAIN WIRING 1.1 Wiring for light Point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Steel conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Point Wiring for twin control light Point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Point Wiring for submain wiring/ circuit wiring along with earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed Steel conduits as required. a) 2 x 2.5 Sq. mm + 1 x 2.5 Sq. mm earth wire. Mtrs b) 2 x 4 Sq. mm + 1 x 4 Sq. mm earth wire. Mtrs c) 2 x 6 Sq. mm + 1 x 6 Sq. mm earth wire. Mtrs. 200 d) 4 x 2.5 Sq. mm + 2 x 2.5 sq.mm earth wire Mtrs. 100 e) 4 x 4 Sq. mm + 2 x 4 sq.mm earth wire Mtrs f) 4 x 6 Sq. mm + 2 x 6 sq.mm earth wire Mtrs. 200 g) 4 x 10 Sq. mm + 2 x 10sq.mm earth wire Mtrs. 250 h) 4 x 16 Sq. mm + 2 x 16sq.mm earth wire Mtrs Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduits as required. Metre Supplying and fixing of following sizes of Steel conduit along with accessories in surface/ recess including cutting the wall and making good the samein case of recessed conduit as required. a) 25 mm Metre 1360 b) 32 mm Metre 100 c) 40 mm Metre Supplying and fixing following modular switch/ socket on existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet Each Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each Supplying and fixing modular blanking plate on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 200 UNIT RATE Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
2 SUBHEAD-I: POINT WIRING & SUBMAIN WIRING 1.9 Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections, painting etc. as required. (For light plugs). Each Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps. modular switch, connections, painting etc. as required. (For power plugs). Each Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 3 Nos 3 pin 5/6 amps modular socket outlet and 15/16 amps. modular switch, connections, painting etc. as required. (For computer plugs). Each Supplying and fixing of 3 pin, 5 Amp. ceiling rose on the existing junction box/ wooden block including connection etc. as required. (For power plugs). Each Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps. 'C'-series, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each Supplying and fixing 30 amps, 240 volts, TPN industrial type socket outlet, with 4 pole and earth metal enclosed plug top alongwith 30 amps. 'C'-series, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Each 117 TOTAL OF SUBHEAD I CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS UNIT RATE Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
3 SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. Supplying, installation, testing and commissioning of the following luminaries mounting on surface / recess required for the internal wiring of the building along with suitable hangers and lamps. 1 Surface mounted Industrial Box type 4 X 14W T-5 fixtures with HF ballast (Philips Cat No. TPS 814/414 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each Recessed mounted in modular cielings with 4 X 14W T-5 fixtures with HF ballast (Philips Cat No. TBS 869/414 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each Recessed mounted low glare luminair with 3 X PL-L36W (Philips Cat No. FBS 300/336 P5 HF/ Equivalent ) complete in everyway with accessories & lamps. Each Recessed mounted low glare luminair with 2 X PL-L36W (Philips Cat No. FBS 570/236 FNC D6 MM HPF/ Equivalent ) complete in everyway with accessories & lamps. Each Recessed mounted downlighter 2 X PL-C 26W (Philips Cat No. FBH 225/226 ALR/ Equivalent ) complete in everyway with accessories & lamps. Each 55 6 Surface mounted rectangular luminaire with 2 X 28W T-5 fixtures with HF ballast (Philips Cat No. TPS 814/228 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each Recessed mounted rectangular luminaire with 2 X 28W T-5 fixtures with HF ballast(philips Cat No. TBS 869/228 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 47 8 Industrial Batton suitable for 1 X 28W T-5 fixtures with HF ballast (Philips Cat No. TMS 122/128 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 10 9 Indoor decorative surface mounted suitable for 1 X 28W T-5 fixtures with HF ballast (Philips Cat No. TWG 128 / 2005 HF/ Equivalent ) complete in everyway with accessories & lamps. Each Surface mounted suitable for 1 X PL-S 9 W fixtures with HF ballast (Philips Cat No. FCS 518/209 / Equivalent ) complete in everyway with accessories & lamps. Each 2 UNIT RATE In Fig. Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
4 SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. 11 Wall recess step light luminaire die cast housing suitable for 2 X PL-C 18 W fixtures with HF ballast (Philips Cat No. DBP701/ 2x PLC18W/ Similar specifications of other approved makes) complete in everyway with accessories & lamps. Each Surface mounted suitable for 2 X PL-S 18 W fixtures with HF ballast (Philips Cat No. FCS 518/218 / Equivalent ) complete in everyway with accessories & lamps. Each Recessed down lighter suitable for 1 X PL-C 13W fixtures (Philips Cat No. FBH 145 /113 L / Equivalent ) complete in everyway with accessories & lamps. Each Recessed down lighter suitable for 1 X PL-C 18W fixtures (Philips Cat No. FBH 145 /118 L / Equivalent ) complete in everyway with accessories & lamps. Each 2 15 Recessed down lighter suitable for 2 X PL-C 18W fixtures (Philips Cat No. FBH 145 /218 L/ Equivalent ) complete in everyway with accessories & lamps. Each Surface mounted down lighter suitable for 1 X 70W (Philips Cat No. MBS205 / 1 X 70W MHN-TD / Equivalent ) complete in everyway with accessories & lamps. Each Scrabble with adjustable Lamp position 1X70W CDMT 3000 Deg.K (Havells Cat No. LHOH / Equivalent ) complete in everyway with accessories & lamps. Each Scrabble with adjustable Lamp position 1X35W CDMT 3000 Deg.K (Havells Cat No. LHOH / Equivalent ) complete in everyway with accessories & lamps. Each Scrabble with adjustable Lamp position 2X70W CDMT 3000 Deg.K (Havells Cat No. LHOH / Equivalent ) complete in everyway with accessories & lamps. Each Decorative non-integral medium bay luminaire with prismatic diffusers suitable for 1 X CDM-TT 150W fixtures (Philips Cat No. HPK 205 /CDM- TT 150W PR / Equivalent ) complete in everyway with accessories & lamps. Each 302 UNIT RATE In Fig. Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
5 SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. 21 Wall mounted mirror luminaire suitable for 1 X PL-5 11W fixtures (Philips Cat No. FMS 200/111 / Equivalent ) complete in everyway with accessories & lamps. Each Bulkhead luminaire fitting suitable for 18 W CFL (Philips Cat No. FXC 101/ Equivalent ) complete in everyway with accessories & lamps Each Decorative moulded body ceiling mounted fixture suitablefor 2 X 9W CFL (Havells Cat. No. LHDC / Equivalent ) complete in everyway with accessories & lamps. Each Wall Bracket Lighting fixture suitable for 2 X 9W CFL (Havells Cat. No. LHDC / Equivalent ) complete in everyway with accessories & lamps. Each Supplying of 1200mm A.C Ceiling fan sweep complete (Havells Cat. No. LHDC / Equivalent ) (But without regulator) Each Supplying of wall mounted Turbo Force Air Circulators 450 MM Wall TF of Havells Cat. / Equivalent ) (But without regulator) Each Supplying of Heavy Duty Exhaust Fan complete with louvers / shutter of following sizes a) 300 MM x 1400 RPM Single phase Nos 30 b) 380 MM x 1400 RPM Single phase Nos 113 TOTAL OF SUBHEAD II CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS UNIT RATE In Fig. Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
6 SUBHEAD-III: DISTRIBUTION BOARDS Sl. No DESCRIPTION OF ITEM UNIT DISTRIBUTION BOARDS 1.1 Supplying and fixing following way, single pole and neutral, prewired, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with loose wire box, terminal box, duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper busbar, neutral links, earthbar, dinbar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 2+4, Double door Each Supplying, installation, testing and commissioning of surface/ recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 200 amps tinned copper busbars, common neutral link, earth bar, din bar for mounting MCB's, detachable gland/ knock out plate, and with built in loose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor upto the terminal connector/ neutral link and ready for installation of following ways (but without MCB's and incomer) as required. QTY. a) 4 way (4+12), Double door Each 51 b) 6 way (4+18), Double door Each 83 c) 8 way (4+24), Double door Each 81 d) 12 way (4+36), Double door Each Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole, 10/16/20/32 Amps Nos 2629 b) Triple Pole, 16/20/32 Amps Nos Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps Each 10 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
7 SUBHEAD-III: DISTRIBUTION BOARDS Sl. No DESCRIPTION OF ITEM UNIT QTY. 1.5 Supplying and fixing following rating, foure pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 25 Amps Each 142 b) 40 Amps Each 20 c) 63 Amps Each Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board incuding drilling holes in cubicle panel, making connections, etc. as required. 100 Amp, 16kA Each 32 TOTAL OF SUBHEAD III CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
8 SUBHEAD-IV: TELEPHONE CONDUITING & WIRING UNIT RATE 1 Supplying and fixing cat 5e Information outlet for telephone sockets housed in GI boxes recessed in walls/ partitions/ panelling for telephone outlets Nos. 361 a) Single surface mount/recessed box within jacks (RJ-45) I/O (Cat-6) Nos Fish wire of 5 SWG, fixing hardware etc., including cutting,chasing the walls/floor and filling the chased portion and making good the damages etc. complete as required a) 25 mm dia RM Supplying and drawing the following sizes of anealed tinned electrolytic copper conductor PVC insulated unshielded twisted wires in eisting conduitand making connection on both the ends. a) Cat -5 cable RM Supply, installation, testing, and commissioning of 24 port Jack Panel Cat 5e cable management system with all material as required. 5 Supplying and fixing the telephone tag blocks housed in MS boxes (with hinged cover and duly painted) recessed in wall with adequate knockouts including chase cutting and making the surface good and making connections complete as required Nos 28 a) 10 pair Nos 200 b) 20 pair Nos 1000 c) 50 pair Nos 1000 TOTAL OF SUBHEAD IV CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
9 SUBHEAD V: DATA NETWORKING 1 Supply, installation, testing and commissioning of category 6 flush mounted information outlets wired according to T568B standard with a faceplate. The plastic shall be high impact, flame retardent & ULrated thermoplastic with minimum insulation resistance of 500 M Ohm Nos Single surface mount/recessed box withn jacks (RJ-45) I/O (Cat-6) Nos fish wire of 6 SWG, fixing hardware etc., including cutting,chasing the walls/floor and filling the chased portion ande making good the damages etc. complete as required a) 25 mm dia RM Supplying and drawing the following sizes of anealed tinned electrolytic copper conductor PCV insulated unshielded twisted wires in eisting conduitand making connection on both the ends. a) Cat - 6 cable RM Supply, installation, testing, and commissioning of 24 port Jack Panel Cat 6 cable management system with all material as required. Nos 22 6 Supply, installation, testing, and commissioning of 24 port switch with all meterial as required Nos 22 7 Supply, installation, testing, and commissioning of 12U rack with all meterial as required Nos 2 8 Supply, installation, testing, and commissioning of 12 port 1000 MBPS core switch with all materials as required. Nos 4 9 Supply, installation, testing, and commissioning of rack server 42U with all meterial as required Nos 3 10 Supply, installation, testing, and commissioning of patch cord 2 meter with all meterial as required Nos 657 Ru-Tech Services Inc. Page 1 Electrical BOQ.xls
10 SUBHEAD V: DATA NETWORKING 11 Supply, installation, testing, and commissioning of patch cord 5 meter (1 side R445 another side Unterminated)with all meterial as required Nos Supply, installation, testing, and commissioning of information outlet(wi-fy)with all material as required Nos Supply, installation, testing, and commissioning of UPS system with following features 1. High freq. PWM inverter using IGBT 2. Manual bypass switch 3. Inbuilt Static Switch Character Alpha Numeric LCD display with 5. SMF batteries to provide approx. 2 hours backup time on IT load alongwith battery rack. a. 8 KVA True on-line, Nos 2 b. 20 KVA True on-line, Nos 2 c. 25 KVA True on-line, Nos 1 d. 40 KVA True on-line, Nos 1 TOTAL OF SUBHEAD V CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page 2 Electrical BOQ.xls
11 SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.1 Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground including the cost of digging and back filling with sand and brick protection as required and including testing and commissioning of the following sizes of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS : 7098 (Part-I). The costs shall include for all cables to be provided with a 1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineerin-charge. a) 3.5 core, 185 Sq.mm. Meter 160 b) 3.5 core, 150 Sq.mm. Meter 20 c) 3.5 core, 120 Sq.mm. Meter 210 d) 3.5 core, 70 Sq.mm. Meter 460 e) 3.5 core, 50 Sq.mm. Meter 120 f) 3.5 core, 35 Sq.mm. Meter 95 g) 3.5 core, 25 Sq.mm. Meter Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground including the cost of digging and back filling with sand and brick protection as required and including testing and commissioning of the following sizes of 1.1KV grade multicore aluminium conductor PVC insulated and PVC sheathed armoured cable conforming to IS : 1554 (Part-I). Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineer-in-charge. a) 4 core, 16 Sq.mm. Meter 2505 b) 4 core, 10 Sq.mm. Meter 1580 c) 4 core, 6 Sq.mm. Meter 1810 d) 4 core, 4 Sq.mm. Meter 4770 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
12 SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.3 Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground as required and including testing and commissioning of the following sizes of 1.1KV grade multicore copper conductor PVC insulated and PVC sheathed un-armoured cable conforming to IS : 1554 (Part-I). Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineer-in-charge. a) 4 core, 25 Sq.mm. Meter 190 b) 4 core, 16 Sq.mm. Meter 240 c) 4 core, 10 Sq.mm. Meter 380 d) 4 core, 6 Sq.mm. Meter 450 e) 4 core, 4 Sq.mm. Meter 3540 f) 4 core, 2.5 Sq.mm. Meter Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 core, 185 Sq.mm. Set 6 b) 3.5 core, 150 Sq.mm. Set 2 c) 3.5 core, 120 Sq.mm. Set 10 d) 3.5 core, 70 Sq.mm. Set 19 e) 3.5 core, 50 Sq.mm. Set 4 f) 3.5 core, 35 Sq.mm. Set 4 g) 3.5 core, 25 Sq.mm. Set 18 h) 4 core, 16 Sq.mm. Set 102 i) 4 core, 10 Sq.mm. Set 64 j) 4 core, 6 Sq.mm. Set 72 k) 4 core, 4 Sq.mm. Set 258 l) 4 core, 2.5 Sq.mm. Set 46 Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
13 SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.5 Fabrication and installing following size of perforated M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc. as required. a) 375 mm width x 50 mm depth x 2.0 mm thickness Meter 1250 b) 150 mm width x 50 mm depth x 1.6 mm thickness Meter 300 c) 100 mm width x 50 mm depth x 1.6 mm thickness Meter Providing & laying in position hume pipes of the following sizes in road crossings, paved areas etc., including collars, joints filled with cement mortar 1:4 (1 Cement :4 Coarse sand ) finished complete as required. a) 100mm dia Meter 150 b) 250mm dia Meter 100 TOTAL OF SUBHEAD VI CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
14 SUBHEAD VII: EARTHING Sl. DESCRIPTION OF ITEM No. 1 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required. UNIT QTY. Set 36 2 Extra for using salt and charcoal for pipe earth electrode as required. Set 36 3 Supplying and laying 25 mm X 5 mm thick G.I. Strip at 0.5 meters below ground as strip earth electrod including soldering etc. as required. 4 Providing and Fixing 25mm x 5mm GI strip in 40 mm dia G.I. Pipe from earth electrode, as required. 5 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. Metre 2350 Metre 1800 Metre 90 TOTAL OF SUBHEAD VII CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
15 SUBHEAD VIII: LIGHTENING Sl. No. DESCRIPTION OF ITEM UNIT 1 Supply, installation tested and commissioning of Early streamer Emission based advance Lightning Arrestor System made of 304 L stainless steel including supply and fixing of 1 no. support Mast on top of Mumti complete as required. Each 6 2 Supply and fixing GI strip 25 mm x 3 mm along outside wall / columns as vertical conductors fixing, saddles, screws complete as required. Each Supply and laying in ground with GI strip 25 mm x 3 mm including the cost of digging and back filling complete as required for earth pits interconnection complete as required. Each Providing and making maintenance free earthpits including the cost of 3 nos 16 mm dia 1.2 m long MS earth rods molecularly bonded with 250 micron copper and treated with 10 kgs ground enhancing back filled chemical TEREC+, all earth work, masonary enclosure with bituminized CI pit cover and frame as per IS 3043: Metre 12 TOTAL OF SUBHEAD VIII CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS QTY. ( Rs.) Ru-Tech Services Inc. Page 1 Electrical BOQ.xls
16 1.0 GUEST HOUSE MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 200A FP MCCB Ics=35kA with TMD release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 100 A TP MCCB (Ics=25 ka) 6 Nos. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 1.1 GUEST HOUSE SMB-GF,F/F,S/F,T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 4 1 No. 63 Amp FP MCB(10kA) TP+N AL Busbar shall be suitable to carry 100A continuous current. 1Nos. 25 Amp TP MCB 2 Nos. 63 Amp TP MCB 1.2 GUEST HOUSE UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
17 1 No. 63 Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1.3 GUEST HOUSE AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 200A FP MCCB (Ics=35kA) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 300A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10kA) All the O/G shall have with ON/OFF indication lamp. 2.0 COMMON ACTIVITY MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 250A FP MCCB Ics=35kA with Electronic release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
18 Busbar : 300A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 4 Nos. 100 A TP MCCB (Ics=25 ka) 5 Nos. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 2.1 COMMON ACTIVITY SMB-GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 125A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 2.2 COMMON ACTIVITY SMB-F/F,T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 63 Amp FP MCB(10kA) TP+N AL Busbar shall be suitable to carry 100A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 40 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
19 2.3 COMMON ACTIVITY UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63 Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 3 Nos. 25 Amp TP MCB(10kA) 2.4 COMMON ACTIVITY SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63A Automatic transfer switch 1 No. 63 Amp FP MCB(10kA) TPN Busbar(Aluminium) shall be suitable to carry 100A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 2.5 COMMON ACTIVITY AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1No. 300A FP MCCB (Ics=35kA) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. Ru-Tech Services Inc. Page-4 Electrical BOQ.xls
20 2 Nos. ON/OFF indicating Lamp. Busbar : 350A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp. 3.0 FILM &TV MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 200 A TP MCCB (Ics=25 ka) 3 Nos. 315 A TP MCCB (Ics=25 ka) 3 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 3.1 FILM & TV SMB- 2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) Ru-Tech Services Inc. Page-5 Electrical BOQ.xls
21 TP+N AL Busbar shall be suitable to carry 400A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 Nos. 40 Amp TP MCB(10kA) 6 Nos. 63 Amp TP MCB(10kA) 3.2 FILM & TV SMB- 1 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) TP+N AL Busbar shall be suitable to carry 350A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 6 Nos. 63 Amp TP MCB(10kA) 3.3 FILM & TV SMB- FF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-6 Electrical BOQ.xls
22 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 3.4 FILM & TV SMB- SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 5 Nos. 63 Amp TP MCB(10kA) 3.5 FILM & TV UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 125A continuous current. 5 Nos. 40 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-7 Electrical BOQ.xls
23 Ru-Tech Services Inc. Page-8 Electrical BOQ.xls
24 3.6 FILM & TV UPS SUB-DB-1, Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 40Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 63A continuous current. 6 Nos. 20 Amp TP MCB(10kA) 3.7 FILM & TV UPS SUB-DB-2, 3 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 40Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 63A continuous current. 3 Nos. 20 Amp TP MCB(10kA) 3.8 FILM & TV SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100A Automatic transfer switch 1 No. 100 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-9 Electrical BOQ.xls
25 TPN Busbar(Aluminium) shall be suitable to carry 125A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 3.9 FILM &TV AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 800A FP MDO ACB with microprocessor based O/L & S/C Protection. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 1000A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 7 Nos. 100 A TP MCCB (Ics=25 ka) 6 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp 4.0 PROFESSIONAL STUDIES MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 630A FP MCCB Ics=35kA with Electronic release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 800A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 200 A TP MCCB (Ics=25 ka) Ru-Tech Services Inc. Page-10 Electrical BOQ.xls
26 2 Nos. 150 A TP MCCB (Ics=25 ka) 1 No. 125 A TP MCCB (Ics=25 ka) 2 Nos. 100 A TP MCCB (Ics=25 ka) Ru-Tech Services Inc. Page-11 Electrical BOQ.xls
27 1 No. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 4.1 PROFESSIONAL STUDIES SMB-GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 250A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 4.2 PROFESSIONAL STUDIES SMB-F/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 150 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 200A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-12 Electrical BOQ.xls
28 4.3 PROFESSIONAL STUDIES SMB-S-T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 125 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 160A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 4.4 PROFESSIONAL STUDIES UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 150A continuous current. 5 Nos. 63 Amp TP MCB(10kA) 4.5 PROFESSIONAL STUDIES UPS SUB-DB-1,2,3 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 3 1 No. 63Amp FP MCB(10kA) Ru-Tech Services Inc. Page-13 Electrical BOQ.xls
29 TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4.6 PROFESSIONAL STUDIES SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63A Automatic transfer switch 1 No. 63 Amp FP MCB(10kA) TPN Busbar(Aluminium) shall be suitable to carry 100A continuous current. 9 Nos. 25 Amp TP MCB(10kA) 4.7 PROFFESSIONAL STUDY AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 250A FP MCCB (Ics =35 ka ) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 300A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10 ka) Ru-Tech Services Inc. Page-14 Electrical BOQ.xls
30 All the O/G shall have with ON/OFF indication lamp. 5.0 FINE ARTS MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 800A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1000A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 200 A TP MCCB (Ics=25 ka) 3 Nos.160 A TP MCCB (Ics=25 ka) 4 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 5.1 FINE ARTS SMB- 2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 8 Nos. 63 Amp TP MCB(10kA) 5.2 FINE ARTS SMB- 1 GF Ru-Tech Services Inc. Page-15 Electrical BOQ.xls
31 Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 5.3 FINE ARTS SMB- FF, SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 160 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 5.4 FINE ARTS SMB- TF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-16 Electrical BOQ.xls
32 TP+N AL Busbar shall be suitable to carry 125A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-17 Electrical BOQ.xls
33 5.5 FINE ARTS UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 125A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 5.6 FINE ARTS SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100A Automatic transfer switch 1 No. 100 Amp FP MCCB(25kA) TPN Busbar(Aluminium) shall be suitable to carry 125A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 5.7 FINE ARTS AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 500 A FP MCCB (Ics= 35 ka ) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. Ru-Tech Services Inc. Page-18 Electrical BOQ.xls
34 2 Nos. ON/OFF indicating Lamp. Busbar : 630 A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 4 Nos. 100 A TP MCCB (Ics=25 ka) 5 Nos. 63 A TP MCB (Ics=10kA) All the O/G shall have with ON/OFF indication lamp 6.0 FASHION DESIGN MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 1 Nos. 125 A TP MCCB (Ics=25 ka) 3 Nos. 315 A TP MCCB (Ics=25 ka) 4 Nos. 200 A TP MCCB (Ics=25 ka) 2 Nos. 160 A TP MCCB (Ics=25 ka) 1 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 6.1 FASHION DESIGN SMB-1 SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) Ru-Tech Services Inc. Page-19 Electrical BOQ.xls
35 TP+N AL Busbar shall be suitable to carry 400A continuous current. 7 Nos. 25 Amp TP MCB(10kA) 5 Nos. 40 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 6.2 FASHION DESIGN SMB-1 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 300 Amp FP MCCB(35kA) TP+N AL Busbar shall be suitable to carry 400A continuous current. 7 Nos. 25 Amp TP MCB(10kA) 6 Nos. 40 Amp TP MCB(10kA) 2 Nos. 63 Amp TP MCB(10kA) 6.3 FASHION DESIGN SMB-2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 4 Nos. 25 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-20 Electrical BOQ.xls
36 6 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-21 Electrical BOQ.xls
37 6.4 FASHION DESIGN SMB-FF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 5 Nos. 63 Amp TP MCB(10kA) 6.5 FASHION DESIGN SMB-2 SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 160 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 6.6 FASHION DESIGN SMB-TF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 160 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-22 Electrical BOQ.xls
38 TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 1 Nos. 40 Amp TP MCB(10kA) 6.7 FASHION DESIGN UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 250A continuous current. 5 Nos. 63 Amp TP MCB(10kA) 6.8 FASHION DESIGN UPS SUB-DB-1,2 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 63Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 6.9 FASHION DESIGN UPS SUB-DB-3 Ru-Tech Services Inc. Page-23 Electrical BOQ.xls
39 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-24 Electrical BOQ.xls
40 1 No. 63Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 9 Nos. 25 Amp TP MCB(10kA) 6.10 FASHION DESIGN SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 125A Automatic transfer switch 1 No. 125 Amp FP MCCB(25kA) TPN Busbar(Aluminium) shall be suitable to carry 150A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 6.11 FASHION DESIGN AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Ru-Tech Services Inc. Page-25 Electrical BOQ.xls
41 Busbar : 1000A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 7 Nos. 100 A TP MCCB (Ics=25 ka) 8 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp TOTAL OF SUBHEAD IX CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-26 Electrical BOQ.xls
42 SUB-HEAD X: FIRE DETECTION AND ALARM 1 Supply, Installation, Testing & Commissioning of Microprocessor based addressable Fire Alarm Control Panel with with built-in Battery Back-up for identification of the fire location and fire alarm system control( each Loop consists of 199 devices and 199 detector). The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condition as detailled. Nos 6 2 Supply installation testing and commossioning of Repeater panel with LCD display with battery & battery charger completed as per specification as required. No 26 3 Supply, Installation, Testing & Commissioning of addressable Multicriteria photo thermal smoke detector including the cost of base plate mounting accessories as per detailed. 4 Supply, Installation, Testing & Commissioning of plug-in type addressable (ROR + Fixed temp) heat detectors including the cost of base plate mounting accessories as per detailed. 5 Supply, Installation, Testing & Commissioning of Addressable type Duct Detector complete as per detailed. 6 Supply, Installation, Testing & Commissioning of Control Modules for trip off of (AHU+Fire Damper etc) and as required. The control module should have 2 independent outputs including the cost of mounting accessories complete as per detailed. 7 Supply, Installation, Testing & Commissioning of Addressable Manual Call Point break glass type with Alarm LED and mounting accessories complete as per detailed. 8 Supply, Installation, Testing & Commissioning of Monitor Module with minimum of 2 monitoring inputs for various applications complete as per detailed. Nos 204 Nos 773 Nos 2 Nos 4 Nos 60 Nos. 15 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
BOQ FOR ELECTRICAL WORK OF HLST IN GROUND FLOOR AT S.B.I. LHO BHOPAL.
BOQ FOR ELECTRICAL WORK OF HLST IN GROUND FLOOR AT S.B.I. LHO BHOPAL. Note: Use of Flexible conduits & Elbows in Circuit wiring is not allowed except in exceptional site conditions with the approval of
More informationSchedule of Quantities
CIVIL WORK (A) 1 Providing and fixing corrugated galvanised iron sheets of 20 B.W.G. for roofing with wind ties including fastening with galvanised iron screw and bolts and lead and bitumen washers as
More informationE S T I M A T E TENDER FOR ELECTRICAL & DATA CABLING WORK FOR BANK OF INDIA, KALAWAD ROAD BRANCH(GROUND FLOOR)-RAJKOT CITY
PART- IV - ELECTRIC WORK FOR BRANCH Supply, installation, testing and commissioning of following point wiring as per the specifications and drawings. The unit rate for the switch board and further to point
More informationMAHARSHI DAYANAND UNIVERSITY ROHTAK (A State University established under Haryana Act No. 25 of 1975) NAAC accredited A Grade
MAHARSHI DAYANAND UNIVERSITY ROHTAK (A State University established under Haryana Act No. 25 of 1975) NAAC accredited A Grade NOTICE INVITING TENDER Sealed tenders on item basis are invited on behalf of
More informationAll work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
More informationSPECIFICATIONS FOR TENDER NO: PSNR/SCP/VKS/E 1635 ANNEXURE I TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST
TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST ANNEXURE I Sl.No. Description for BHEL Requirement Offered Deviation Scope of supply, erection and commissioning: 1 The scope of this specification covers
More informationDESCRIPTION UNIT QTY RATE TOTAL (KSHS) Supply and install the following: -
PROPOSED KISUMU HOUSING 3 BEDROOM-TYPE 1 ELECTRICAL INSTALLATION -SITE 01 DESCRIPTION UNIT QTY RATE TOTAL (KSHS) Supply and install the following: - 1.0 Final sub-circuit from Consumer Unit to lighting
More informationTECHNICAL SPECIFICATION FOR ELECTRICAL WIRING / PANELS / SWITCH GEAR
TECHNICAL SPECIFICATION FOR ELECTRICAL WIRING / PANELS / SWITCH GEAR 1.0 GENERAL REQUIREMENTS The installation shall generally be carried out in conforming with the requirements of the Indian Electricity
More informationTECHNICAL SPECIFICATIONS
1. Standards BOS Item / System I ii iii TECHNICAL SPECIFICATIONS Applicable BIS /Equivalent IEC Standards / Applicable MNRE Specifications Standard Description Standard Number Crystalline Silicon Terrestrial
More informationPART-II (COMMERCIAL / PRICE BID) DESIGN, SUPPLY AND INSTALLATION OF CUSTOMIZED STEEL LAB FURNITURE.AT N.C.C.S., PUNE
(An Autonomous Institution of the Department of Biotechnology, Govt. of India) N.C.C.S. Complex, Ganeshkhind, Pune University Campus, Pune 411007. PART-II (COMMERCIAL / PRICE BID) DESIGN, AND INSTALLATION
More informationATTACHMENT F 050R6800016 - CABLE AND WIRING SERVICES FUNCTIONAL AREA I PRICE PROPOSAL FORM Amendment 6
050R6800016 CABLE AND WIRING SERVICES (Column A) (Column B) (Column C) (Column D) (Column E) (Column F) (Column G) (B+C+D+E)*F= G Item Description PER 100' RUN PER 150' RUN PER 200' RUN PER 300' RUN QUANTITY
More informationNATIONAL COIR RESEARCH AND MANAGEMENT INSTITUTE (NCRMI) KUDAPPANAKUNNU.P.O, THIRUVANANTHAPURAM NOTICE INVITING LIMITED QUOTATION
NATIONAL COIR RESEARCH AND MANAGEMENT INSTITUTE (NCRMI) KUDAPPANAKUNNU.P.O, THIRUVANANTHAPURAM NOTICE INVITING LIMITED QUOTATION NCRMI/LIB/ELE001/15 4.09.2015 Competitive sealed quotations are invited
More informationElectrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016. Underground branch circuit feeding a detached garage:
Electrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016 * Garage construction requires permits (electrical, building) * Permits must be applied for at the time. * Dial
More informationDistribution Boards. A perfect blend of aesthetics, functionality and safety
Distribution Boards A perfect blend of aesthetics, functionality and safety ABB a global leader Distribution Boards ABB (www.abb.com) is a global leader in power and automation technologies that enable
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationBILL OF QUANTITY FOR THE HVAC WORKS OF The Institute of space technology, near Toll Plaza (G.T. Road,) Islamabad
BILL OF QUANTITY FOR THE HVAC WORKS OF The Institute of space technology, near Toll Plaza (G.T. Road,) Islamabad PLEASE MARK TICK ON LEFT BOX WHICH EQUIPMENT YOU HAVE QUOTED PROPOSAL BASED ON CHINESE EQUIPMENT
More informationTECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT
TECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT 1.1 General 1.1.1 These Special Conditions of Contract supplement the General Instructions.
More informationDistribution Boards & Consumer Units
Distribution Boards & Consumer Units Enclosures for system pro M compact Distribution Boards & Consumer Units Contents General 2/ Distribution Boards Mini Center compact Mounting kits for compact accessories
More informationPaper on Basbar Trunking System for Electrical Supply to Industrial & commercial Installation
IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 04, Issue 01 (January. 2014), V6 PP 01-12 www.iosrjen.org Paper on Basbar Trunking System for Electrical Supply to Industrial
More informationELECTRICAL WORKS FOR CPCB ZONAL OFFICE AND LABORATORY AT BANGALORE. Consultants: SRIMATHA ENTERPRISES
Item No. BILL OF QUANTITIES WITH SPECIFICATIONS - ELECTRICALS Qty. Unit Rate Description 1.0 415VOLTS MAIN DISTRIBUTION BOARDS CONSTRUCTION (i) Sheet steel - 2mm thick for frames and equipment mounting
More informationABB. Installation Enclosures Meter Boxes. SMB s. DMB s. Enclosures
Meter Boxes SMB s To house a single phase kilowatt hour meter Standard kwh meter mounting Square or triangular securing screw Stand off for circuit breaker Optional circuit breaker reset rod DMB s To house
More information19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
More informationElectrical Practices for Construction Work
1. Purpose Electrical Practices for Construction Work The purpose of this Code is to provide practical guidance and set minimum safety requirements for electrical practices on all construction sites in
More informationMedical Lighting. XL4 Patient Light
Medical Lighting XL4 Patient Light The XL4 is the new ergonomically designed, energy efficient patient light from EDL Lighting Limited. Its purpose is to cover a spectrum of applications within the Healthcare
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationTECHNICAL SPECIFICATION FOR HIGH MAST LIGHTING SYSTEM, 20 MTRS HEIGHT
TECHNICAL SPECIFICATION FOR HIGH MAST LIGHTING SYSTEM, 20 MTRS HEIGHT Annexure A Sl.No. Description 1 Scope: The scope cover the design, manufacturing, supply and delivery at GCF Jabalpur on FOR basis
More informationLIEBERT VNSA Installation Sheet
LIEBERT VNSA Installation Sheet Description The Liebert vnsa network switch is designed for connecting multiple Ethernet-ready devices and comes in various models. The unit may have: A Liebert icom display
More informationSwitchboard system. NorLine 800
Switchboard system NorLine 800 NorLine 800 SWITCHBOARD SYSTEM 2 NorLine 800 Switchboard system Table of contents Subject Page Table of contents 2 Overview 2-3 NorLine 800 technical specifications 4 Structural
More informationMEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationELECTRICAL GUIDELINES FOR SINGLE-FAMILY HOME OWNERS:
ELECTRICAL GUIDELINES FOR SINGLE-FAMILY HOME OWNERS: Chapter 12 of the Burlington Code of ordinances allows owner occupants of single family homes to do their own wiring if they choose. If you choose to
More informationRegulations for the Installation of Electrical Wiring, Electrical Equipment and Air Conditioning Equipment
Regulations for the Installation of Electrical Wiring, Electrical Equipment and Air Conditioning Equipment Qatar General Electricity & Water Corporation KAHRAMAA Customer Services Department State of Qatar
More informationFinancial Bid Format(All Inclusive)
Financial Bid Format(All Inclusive) Sl. N. Description In Figure Rate Per Unit In Words 1 ROUTER TYPE A 2 ISP LINK LOAD BALANCER 3 INTERNET SECURITY 4 ROUTER TYPE B 5 USER & DEVICE IDENTITY MANAGEMENT
More information2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More informationEVC40 EMERGENCY VOICE COMMUNICATION SYSTEM
EVC40 EMERGENCY VOICE COMMUNICATION SYSTEM INSTALLATION MANUAL Protec Fire Detection PLC, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT. Telephone: +44 (0) 1282 717171 Fax: +44 (0) 1282 717273
More informationTECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.)
TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.) 1. Requirement: Two (02) Nos. DC Type, 3 phase, 3 wire Projection Welding Machine is required for welding of ventilation M.S. / Stainless
More informationTransformers from 25va to 500kva. Standard despatch in days not weeks
Transformers from 25va to 500kva Standard despatch in days not weeks JMS Transformers Ltd 20 Ivatt Way Westwood Business Park Peterborough PE3 7PG UK Tel: +44 (0)1733 760000 Fax +44 (0)1733 760004 e-mail:
More informationSECTION 16720 - FIRE AND SMOKE ALARM SYSTEM. City of San Diego, CWP Guidelines
PART 1 -- GENERAL 1.1 WORK OF THIS SECTION SECTION 16720 - City of San Diego, CWP Guidelines A. The WORK of this Section includes providing manual and automatic fire alarm and smoke detection systems meeting
More informationDIVISION 27 COMMUNICATIONS. A. System design shall be completed by a Registered Communications Distribution Designer (RCDD).
DIVISION 27 COMMUNICATIONS 27 00 00 COMMUNICATIONS A. System design shall be completed by a Registered Communications Distribution Designer (RCDD). B. Comply with American National Standards Institute
More informationKAM 25-32 A Lighting Busbar System KAP 40-63 A Plug-in Busbar Distribution System
2-32 A Lighting Busbar System 4-63 A Plug-in Busbar Distribution System / E-LINE KX Compact Busbar Distribution System 63...63 A E-LINE KB Compact Busbar Distribution System 8...63 A E-LINE KO Plug-in
More informationMEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
More informationORAY PREFABRICATED GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS
GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS ~GSM SHELTER CONTAINERS ARE PROCUDED ACCORDING TO THE DEMANDED SIZE.~ (W x L x H) Page1 GENERAL FEAUTURES Environmental Conditions : Maximum outdoor temperature
More informationPresenters Brett Weiss, Gabe Martinez, Brian Kroeger.
1 Presenters Brett Weiss, Gabe Martinez, Brian Kroeger. Topics to be covered: Cable identification Purpose of the various cable types Installation techniques Building Infrastructure Overview of networking
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More information4 IX D N E P P A Installation methods Current-carrying capacity and voltage drop for cables Reference method IET Wiring Matters
8 Appendix 4 of BS 7671 by Mark Coles Appendix 4, Current-carrying capacity and voltage drop for cables and flexible cords, has seen significant changes with the publishing of BS 7671:2008. This article
More informationContrast 2 LED. Performance Compactness Complete flexibility NEW
NEW Contrast 2 LED High light output in a compact and discreet design with a wide choice of light effects created using different light distributions and accessories Performance Compactness Complete flexibility
More informationGUIDE TO THE AM2 EXAM
AM2 GUIDE TO THE AM2 EXAM What is AM2? AM2 or the Achievement Measurement 2 is a practical performance skill test administered by the National Electrotechnical Training (NET). You must take the AM2 test
More informationSECTION 25110 TELECOMMUNICATION ROOMS
PART 1 - GENERAL 1.1 SUMMARY A. SCOPE SECTION 25110 TELECOMMUNICATION ROOMS 1. This section includes the minimum installation requirements for equipment and cabling infrastructure in Telecommunication
More informationTrial Exams C. Standards and Regulations. Examination No: GH-08-C- 1 hour and 5 minutes plus 10 minutes reading time
Trial Exams C Standards and Regulations Examination No: GH-08-C- This test is intended to gauge your knowledge of essential information contained within AS/CA S009:2013. To qualify for an allpication to
More informationDoc Ref: 2015.06.01.002. 602.783.1112 baselayer.com 2015 BASELAYER TECHNOLOGY, LLC
TM 602.783.1112 baselayer.com 2015 BASELAYER TECHNOLOGY, LLC TM D400E Data Module (60Hz) The EDGE D400E is designed to meet high power density requirements for both the HPC and Web Scale environments while
More informationSecuring your electrical installations Prisma,
Securing your electrical installations Prisma, an optimised solution for type tested low voltage switchboards up to 3200 A Table of contents Developing installation safety 4 Prisma P * Electrical switchboards
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationLV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE
LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE 380/415/690 Volt AC 50/65/80/100 ka 1. Product Guide Low Voltage Motor Control Centre CONTSTRUCTION Continuous "poured in place" gasket
More informationMidNite Solar E-Panels Explained
MidNite Solar E-Panels Explained A MidNite Solar E-panel is an AC/DC Disconnect Box that has the Inverter installed on the door of the E-Panel or above the E-panel. MidNite's E-Panels place the AC and
More informationTrade of Electrician. Three-phase Distribution Boards And Socket Circuits
Trade of Electrician Standards Based Apprenticeship Three-phase Distribution Boards And Socket Circuits Phase 2 Module No. 2.3 Unit No. 2.3.2 COURSE NOTES Created by Charlie Walsh - Athlone TC Revision
More informationEARTHING AND BONDING AT SECONDARY SUBSTATIONS
DISTRIBUTION CONSTRUCTION MANUAL SECTION 4 - SUBSTATIONS ISSUE B SEPT 1996 4.4.4 EARTHING AND BONDING AT SECONDARY SUBSTATIONS 1 SCOPE This section of the Distribution Construction Manual lays down the
More informationFOR ELECTRICAL WORK TECHNICAL BID ISSUED TO :
PROJECT : INTEGRATED DEVELOPMENT OF KABIRWAD AT MANGLESHWAR, BHARUCH. CLIENT : BHARUCH COLLECTOR OFFICE ARCHITECT : AD MOBEL, AHMEDABAD. ELECTRICAL CONSULTANTS: PRABHAS ENGINEERS CONSULTANTS : BENCHMARK
More informationChapter 9. Bonding and Grounding
Chapter 9 Bonding and Grounding Objectives Describe why the cable should be bonded Describe bonding and grounding procedures Define Bonding and Grounding Explain Safety Benefits and intent of bonding and
More informationDIVISION 26 - ELECTRICAL SECTION 26 05 20 CABLES FOR INSTRUMENTATION
DIVISION 26 - ELECTRICAL PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Instrumentation Cables 1.02 SUBMITTALS A. Submit in accordance with requirements of Section 01 33 00. B. Product Data: Submit
More informationUSB 3.0 Cables. Color. Black Black Black Black Black 3021003-03 3021009-06 3021015-10 3021021-16 3021027-16. Black Black Black Black Black
USB.0 CableS USB.0 and backwards compatible for USB.0 and. Supports high speed, 480Mbps Twisted-pair construction reduces cross talk to ensure error free transfer USB A male to USB B male 00-0 007-0 0-09-
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationElectrical Code Regulation
Electrical Code Regulation St. Clair County has adopted the 2005 National Electrical Code in its entirety for the unincorporated areas of the county and all communities that have contracted with the county
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More information800 Communications Circuits
ARTICLE 800 Communications Circuits INTRODUCTION TO ARTICLE 800 COMMUNICATIONS CIRCUITS This article has its roots in telephone technology. Consequently, it addresses telephone and related systems that
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationGE Power Controls. MiniFORM Switchboards
GE Power Controls MiniFORM Switchboards MiniFORM MiniFORM MiniFORM switchboards Arrangement Modules Arrangement modules 1-6 6 Arrangement modules 7-12 7 Arrangement modules 12-14 8 Arrangement modules
More information270526-TC Grounding and Bonding for Telecommunications Systems
270526-TC Grounding and Bonding for Telecommunications Systems Part 1 - General Related Documents The following related sections of the OT standards shall also be applicable to this section. OT Engineer
More informationSPACE TYPE: AUTOMATED DATA PROCESSING CENTER (ADP) (MAINFRAME)
SPACE TYPE: AUTOMATED DATA PROCESSING CENTER (ADP) (MAINFRAME) Construction Criteria The unit costs for ADP Mainframe space types are based on the construction quality and design features in the following
More informationBill of Quantities. Factory Services Date: 23.08.2010
Factory Services Date: 23.08.2010 Bill of Quantities 1. All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under Basis of Design in the specifications.
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationDecorative Metal Wiring Accessories in Assorted Plate Finishes
Decorative Metal Wiring Accessories in Assorted Plate Finishes Switches Power Socket Outlets 13A Fused Connection Units Control Switches TV Telephone Data Sockets Deco unique product codes Decorative Metal
More informationVoltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated lightning impulse withstand voltage [kv] 75 125
Standards and Regulations IEC 62271-200 ; VDE 0671-200 ; BS EN 62271-200 Technical Data MC3-12 MC3-24 Voltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated
More informationDIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 MINORITY AND WOMEN S BUSINESS ENTERPRISE PARTICIPATION
More informationCategory 6 Solutions. 4. Category 6 Solutions. 09/08 400836IN TrueNet Structured Cabling. Introduction... 4.2. Cable... 4.3. Patch Panels... 4.
Category 6 Solutions Introduction... 4.2 Cable... 4.3 Patch Panels... 4.4 Modules... 4.6 Patch Cords... 4.12 Outlets... 4.16 Faceplates...4.18 4. 1 Search Category 6 Solutions Introduction ADC KRONE s
More informationBOQ for Plumbing, Sanitary Works
BOQ for Plumbing, Sanitary Works Page 1 of 6 Sr.No Item Description Quantity Unit Rate Amount (Rs.) 1 SANITARY FIXTURES Providing & Fixing star white colour vitreous china wall mounted wc with 1a heavy
More informationComponents for System Solutions E9/5. Ex d Enclosure System Made of Light Metal or Stainless Steel, "Flameproof Enclosure" Series 8264. www.stahl.
> Installation chamber can be fully used > Up to three mounting levels can be used > Saving of weight > Compact > Easy to combine > 26 enclosure versions > 15 window versions www.stahl.de 10303E00 The
More informationPLUMBING MAINTENANCE WORK FOR TOILETS IN HEAD OFFICE, SUPPLYCO ESTIMATE
Sl.No. PLUMBING MAINTENANCE WORK FOR TOILETS IN HEAD OFFICE, SUPPLYCO ESTIMATE Description of item Qty Unit Rate Amount 1 Demolishing tile work/cement concrete/( carefully taking out the closet and other
More information1. Electrical Equipment A) Transformer
Standards and Basic Equipment Date : 15 November 2010 1. Electrical Equipment 2. Terminology 3. Code & Standard 1. Electrical Equipment A) Transformer A1) One Transformer and 11kV Switchgear in High Rise
More informationInstallation Guide Solar Connect-11
Installation Guide Solar Connect-11 Version 1.1 Contents Important Product Information 3 System Registration Form 4 Solar Connect-11 Overview 5 Internet & Power Connections 6 Single Phase CT Connections
More informationSECTION 00 0110 TABLE OF CONTENTS. H. 00 2115.01 - Proposed Material, Product or Equipment Substitution Request
SECTION 00 0110 PROCUREMENT AND CONTRACTING REQUIREMENTS 1.1 DIVISION 00 -- PROCUREMENT AND CONTRACTING REQUIREMENTS A. 00 0101 - Project Title Page B. 00 0105 - Certifications Page C. 00 0110 - Table
More informationOur data centres have been awarded with ISO 27001:2005 standard for security management and ISO 9001:2008 standard for business quality management.
AIMS is Malaysia and South East Asia s leading carrier neutral data centre operator and managed services provider. We provide international class data storage and ancillary services, augmented by an unrivaled
More informationSERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
More informationHOUSTON COMMUNITY COLLEGE HCC ALIEF CAMPUS MAIN BUILDING, FIRST, SECOND & FOURTH FLOORS RENOVATION ISSUE DATE: 10.17.12
SECTION 27 05 26 - GROUNDING AND BONDING FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes grounding and bonding products, design requirements and installation for communications
More informationELECTRICAL INSTALLATION CONDITION REPORT (Requirements for Electrical Installations BS 7671 IEE Wiring Regulations)
Original Certificate DETAILS OF THE CLIENT Certificate reference: ELECTRICAL INSTALLATION CONDITION REPORT (Requirements for Electrical Installations BS 7671 IEE Wiring Regulations) Name: Address: PURPOSE
More informationGENERAL ELECTRICAL REQUIREMENTS
GENERAL ELECTRICAL REQUIREMENTS RECEPTACLE SPACING Within 6-feet of the edge of any door HABITABLE Not more than 12-feet apart along wall ROOMS: At all wall spaces 24 or more wide Within 24 of edge of
More informationSECTION 16760 - PLANT INTERCOMMUNICATION SYSTEM. City of San Diego, CWP Guidelines
PART 1 - GENERAL SECTION 16760-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing plant intercommunication systems with power supplies, signal amplifiers,
More informationSYSTIMAX SCS PowerSum and GigaSPEED XL Cabling Installation Guidelines
SYSTIMAX SCS PowerSum and GigaSPEED XL Cabling Installation Guidelines This document contains critical information regarding the installation of a certified SYSTIMAX SCS that meets or exceeds performance
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationSPACE TYPE: LABORATORY (WET) FOR CHEMISTRY AND BIOLOGY
SPACE TYPE: LABORATORY (WET) FOR CHEMISTRY AND BIOLOGY Construction Criteria The unit costs for (Wet) space types are based on the construction quality and design features in the following table. This
More informationHow To Wire Wireline Cable To A Cell Phone (New Zealand)
Installation Guide EnerNOC Site Server - S2 Installation Guide - AUS, NZ v 1.7 EnerNOC New Zealand Limited 2 Collina Terrace PO Box 12-202 Thorndon Wellington NZ 6144 +64 4 909 7546 1 Table of Contents
More information2014 NEC Guide Lines for Home Owner Doing Electrical Work on their Property
2014 NEC Guide Lines for Home Owner Doing Electrical Work on their Property A brief summary of the most used code references for residential wiring State of Idaho Division of Building Safety Electrical
More informationGROWTH MANAGEMENT DEPARTMENT 201 SE 3 rd ST, (Second Floor), Ocala, FL 34471 (352) 629-8421; FAX: (352) 629-8264
BUILDING CODE GUIDELINES FOR ELECTRICAL INSPECTIONS Building Code compliance is the obligation of design professionals and/or contractors. Plan Review and Inspection Guidelines are intended to be used
More informationELECTRICAL SAFETY Information Bulletin
ELECTRICAL SAFETY Information Bulletin January 2016 CEC-10 [rev-9] Page 1 of 8 CANADIAN ELECTRICAL CODE SUBJECT: Section 10 Grounding and Bonding Rule 10-204 Grounding Connections for Alternating-Current
More information2.8. Ex-Recess-mounted, ceiling emergency light fittings in compact metal design
.8 Ex-Recess-mounted, ceiling emergency light fittings in compact metal design RLF/RLF-INOX 50 18-58 W / RLF/RLF-INOX 50... N 18-36 W (Zone 1,, 1, ) The explosion-protected lighting concept for clean rooms
More informationInstallation. Smart-UPS VT MGE Galaxy 3500. Maintenance Bypass Panel. 10-40 kva 400 V
Installation Smart-UPS VT MGE Galaxy 3500 Maintenance Bypass Panel 10-40 kva 400 V Contents Safety.................................................. 1 Save these instructions...................................
More informationCB200W Water Leak Detection Panel Application Guide
Checked by: AJC Approved by: JBJ Contents CB200W Water Leak Detection Panel Application Guide 1. Cabinet Specifications... 2 2. Panel Hardware Specifications... 3 3. Panel Configuration... 4 4. Technical
More informationOUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd
OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd ACTOM OUTDOOR DISCONNECTORS Single Side Break (SSB) Disconnector 22-132 kv, 800-1 A, 25 ka - 3s Typical bearing assembly. Voltage range 11 kv to 132
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More information