BILL OF QUANTITY FOR THE HVAC WORKS OF The Institute of space technology, near Toll Plaza (G.T. Road,) Islamabad

Transcription

1 BILL OF QUANTITY FOR THE HVAC WORKS OF The Institute of space technology, near Toll Plaza (G.T. Road,) Islamabad PLEASE MARK TICK ON LEFT BOX WHICH EQUIPMENT YOU HAVE QUOTED PROPOSAL BASED ON CHINESE EQUIPMENT PROPOSAL BASED ON JAPANESE, KORIAN OR MALAYSIAN EQUIPMENT Sr Description Qty Unit Rate Amount Supply and installation of following air cooled Multi Digital Scroll (MDS) Reversible (Heat & Cool) type outdoor air conditioning unit complete with all accessories as per schedule of technical particular & as shown on the drawings and as approved by the Engineer/Consultant: 1 ACU#1 capacity 18 tons 1 No. ACU#2 capacity 32 tons 1 No. ACU#3 capacity 25 tons 1 No. ACU#4 capacity 24 tons 1 No. ACU#5 capacity 24 tons 1 No. ACU#6 capacity 24 tons 1 No. ACU#7 capacity 14 tons 1 No. ACU#8 capacity 36 tons 1 No. ACU#9 capacity 31.5 tons 1 No. ACU#10 capacity 32 tons 1 No. ACU#11 capacity 35.5 tons 1 No. ACU#12 capacity 24 tons 1 No. ACU#13 capacity 32.5 tons 1 No. ACU#14 capacity 33.5 tons 1 No. ACU#15 capacity 39 tons 1 No. 2 Supply and installation of fresh air special type Air Cooled Self Contained air Conditioning unit capacity having of 30 tons with steam humidifier complete with all accessories as per schedule of technical particular & shown on the drawings or as approved by the Engineer/Consultant.

2 Supply and installation of following Indoor DX Ceiling decorative Fan Coil Unit (FCU) including appropriate size copper piping between indoor and outdoor unit complete with all accessories as per schedule of technical particular shown on the drawing # 1, including expection valves and y connectors and or as approved by the Engineer/Consultant. Basement floor tons Unit # 1 to 25. Lower Ground Floor Wall mounted type Cooling /Heating unit Cooling capacity 1.5 tons Unit # 26 to 41. tons for Lower Ground Floor Unit # 42 to 43. Cooling/Heating unit Cooling capacity 1.5 tons for Lower Ground Floor Unit # 44 to 57. Wall mounted type Cooling/Heating unit Cooling capacity 1.5 tons for Lower Ground Floor Unit # 58 to 73. Upper Ground Floor Cooling/Heating unit Cooling capacity 1.5 tons Unit # 74 to 84. tons Unit # 85 to 92. Cooling/Heating unit Cooling capacity 1.0 ton Unit # 93 to No. 16 No. 14 No. 16 No. 11 No. 8 No.

3 3 tons Unit # 95 to 125. Cooling/Heating unit Cooling capacity 1.0 ton Unit # 126 to 127. tons Unit # 128 to 140. First Floor tons Unit # 141 to 151. Cooling/Heating unit Cooling capacity 1 tons Unit # 152. tons Unit # 153 to 157. Vertical Floor standing type Cooling/ Heating unit Cooling capacity 1.5 tons Unit # 158 A, 158 B, 159 A, 159 B, 160 A & 160 B. tons Unit # 161 to 163. Cooling/Heating unit Cooling capacity 1.5 tons Unit # 164 to 165. tons Unit # 166 to 193. Scond Floor Cooling /Heating unit Cooling capacity 2 tons Unit # 194 to 205. Cooling /Heating unit Cooling capacity 1.5 tons Unit # 206 to No. 11 No. 1 No. 5 No. 6 No. 3 No. 28 No. 1 4 No.

4 Cooling /Heating unit Cooling capacity 2 tons Unit 24 No. # 210 to 228. Supply and installation of sheet metal ducting complete in all respect as shown on the drawings, complete with accessories hangers, supports & as approved by the Engineer/Consultant: 22 Guage 2500 Sq. ft 24 Guage Sq. ft 26 Guage Supply & installation of following 1250 Sq. ft Aluminium Foil Fiber Glass 16kg/m3 density) insulation wrapped with Aluminium tape and shall be protected with 8 oz canvas, complete in all respect as shown on the drawings & as shown on the drawings as as approved by the engineer/consultant: Sound liner 1'' thick 2860 Sq. ft Thermal insulation 1'' thick Sq. ft Thermal insulation 2'' thick Supply & installation of Refnet Y 1860 Sq. ft Connectors as per specification and thickness shall not be less than 18 guage (include price in item # 3) Supply and Installation of refrigerant pipes type L thickness not less than 20 gauge (Liquid+Gas) with expanded rubber foam insulation for Multi Split type A/C units from each FCU to outdoor units installed on roof top, including control wirring, Flushing, gas charging, hangers, supports and brackets of following sizes all refrigerant pipes should be in PVC Dura Duct as approved by the Engineer/consultant: 6.35mm x t Rft 9.52 mm x t Rft

5 12.7 mm x t Rft mm x t Rft mm x t Rft 28.6 mm x t Rft 41.3 mm x t Rft 34.9 mm x t Rft 22.2 mm x t Rft 8 Supply and Installation of PVC condensate drain pipe with insulation from each FCU to condensate tank in basement) complete in all respect ready to operate as approved by the Engineer/Consultant supply & installation of Communication cable between all indoor units and outdoor units complete in all respect, as approved by the Engineer/ Consultant. Supply and installtion of Aluminium Registers for supply of fresh air and exhaust air of following sizes, complete in all respect, support and other accessories etc. Make: Steel Craft, as approved by the Consultant: For Basement floor SAD 24"x6" 3 No. For Lower Ground Floor SAD 24'' x 6'' 3 No. For Upper Ground floor SAD 24''x 6'' 9 No. For First Floor SAD 24'' x 6'' 2 For First Floor SAD 24'' x 12'' 1 For Second Floor SAD 24'' x 3'' Supply and Installation of Electronic Expan 9 No. sion valve (EXV) as per manufacturer's recommwndation and approved by the Engineer/consultant include in indoor units item # 3.

6 12 Supply and installation of Best quality PVC water tank 500 gallons (normally used as overhead tank) for condensate including level automatic controller with upper and lower level sensor complete in all respect location is in the lift well on basement as approved by the Engineer/consultant. 1 No. 13 Supply & installation of Centrifugal Pump 25 gpm against (20 ft head) as specified suitable to throw condensate water collected in the tank from basement to lower ground floor in open space as shown on the drawings through automatic water level controller complete in all respect and as approved by the Engineer/ consultants. 1 No. 14 Supply and installtion of electrical DB for air conditioning with incoming and outgoing circuit breakers with AEG/ Hager/Terasaki/Fuji/BB including bus bar 1 No. volt & Ampere meters, selector switch phase indicator lamps complete in all respect approved equivalent by the engineer/consultant of following capacity Incoming 1500 ATP MCCB 1 No. Outgoing 200 ATP MCCB 11 No. Outgoing 150 ATP MCCB 5 No. Outgoing 130 ATP MCCB Outgoing 125 ATP MCCB 3 No. Outgoing 100 ATP MCCB 3 No. Outgoing 80 ATP MCCB 3 No.

7 15 Supply and installation of copper conductor power cables make by Pakistan Cables/ AEG Cables/ New Age cables or approved equivalent cables by the Consultant in cable tray from DB to all out door units installed on roof as shown on the drawings, complete in all respect as and as approved by the Engineer/consultant as detailed below: 3.5 core 300 mm sq 660 Rft 3.5 core 35 mm sq 1270 Rft 3.5 core 30 mm sq 1 Rft 3.5 core 18 mm sq 1 Rft 3.5 core 16 mm sq 65 Rft 3.5 core 10 mm sq 1 Rft 3.5 core 8 mm sq 1 Rft Construct, fabricate and install Foundation structure for frame for placing condensing units in consultation with structural Engineer of the client. Supply of Manufacture's essential spare parts for all above items for 2 years normal operation as approved by the engineer/ Consultant (Provide list) Supply of Digital type Wall mounted temperature and humidity indicator Make wall openings in concrete walls of lift well and provided 1'' thick wooden Box in the openings as per sizes given on the drawings complete in all respects as per satisfaction of Engineer/Consultant Testing, balancing & commissioning of the system. Report of Manufacture's Represent Required) Operation and maintenance of the system (8:00) hr at least one month opeartion in summer and one month in winter 17 No. 1

8 22 After completion of commsissioning prepare as build drawing for the record of the client after obtaining approval of the engineer/consultant 23 MDS Software Management Controller 24 Any other item which is essential to complete the project and not given in this BOQ may please be quoted and provide details. Total Cost in Rs Note: a. Earnest money should be in form of Pay Order. b. Following advance payments can be taken against scheduled Bank Gurantee : i. On approval of technical submittals by the Consultant / Engineer ii. On opening LC iii. On production of bill of landing iv. On delivery of equipment at site against theft insurrance 10% 10% 10% 20%