FIBER OPTIC AND COMMUNICATION PRODUCTS

Transcription

1 FIBER OPTIC AND COMMUNICATION PRODUCTS Photonic Products Cable Assemblies Termination Boxes & Hardware Data Center FTTH World Wide Supplier #11 Test Equipment Ethernet Products Solutions for Telecommunications - CATV and Data Communications Cat 5e and Cat 6 Products

2 Table of Contents/Product Index: Fiberdyne Labs Quality you can depend on! 100% Passive WDM, CWDM & DWDM products available! NEW PRODUCTS: MU buildout style attenuator, available now online. LC/APC buildout style attenuator, available now online. Wave Flattener(multi-attenuator housing) available online! Fiber splitter/coupler Y cable, available now, see pages 5-11 WDM Y Cable, available now, see page 17 CWDM and DWDM single wavelength and ADD/DROP 3mm Heavy duty package (4 x1.25 x.375 ) available online. Fiberdyne Labs EDFA-Available NOW-ONLINE! FTTH drop cables with and without tracers-available now! New Ethernet switches available now online. Test Kit Packages available now online. 144 position wall mount splice enclosure available now on page 83. New 288 wall mount splice enclosure available online. Both the 144 and 288 splice enclosures are part of Fiberyne Labs Air Flow/Terminator Data Center product line. This product line offers the alternative to multi terminating style connectors in the data center and beyond! Now available; Quad LC, SM, SM/APC, MM and MM OM3 adapters and adapter panels (24 Packs) Check online for part numbers. New! 10/100/1000 Ethernet Media Converter available now online. Fiberdyne Labs Fast Delivery! Fiber jumper cable assembly experts since 1992! Adapter Panels 79 Adapters / Mating Sleeves 80 Adapters Hybrid male / female 80 Add / Drop Mux Module CWDM 31 Add / Drop Mux Module DWDM 23 Add / Drop Sonet Regenerator Mux 34,35 Air, canned 92 Alcohol wipes 92 APC Cable Assemblies Assorted Hardware Fiber Optic 81 Attenuators: Block 49 Buildout, Precision, Duplex 40,41,43 Buildout, Reduced Length 42,44 Hybrid Buildout 45 Inline 46 Loopback 48 VOA ( Variable ) 47 Cabinet, Air Flow Cabinets for Data Centers 82 Cable, Cat 5e, Cat Cable, Fiber Optic ( bulk ) 76,77 Cable Assemblies, custom Cable, Cat 5e and Cat 6 patchcords 116,117 Cleaning Kits / Supplies 92 Coax Cables ( RG59 and RG6 ) 121 Couplers / Splitters; C-Band 7 Dual Window 8-9 Laser ( 850nm/10Gig ) 11 L-Bands 6 Multimode 850/1300nm 10 Modules ( Coupler modules ) 12,13 Planar 14,15 CWDM Modules CWDM Monitor Modules DS3 Cables 120 Drop Cable / Entrance Cables 50,51 Duplex Fiber Optic Cable ( bulk ) 76,77 Dust Caps ( tethered ) 81 DWDM Modules DWDM Monitor Module 26,27 DWDM ( AWG ) Planar Module Entrance Cables, Node Entrance Cables 50,51 Enclosures, Fiber Optic; Rackmount 78,79,81 Wallmount 78,79,81 Environmental 61 Ethernet; GBICs 114,115 Gigabit Multiplexer 104,105 Media Converters SFPs Switches 100, Fault Locater 94 Fiberdyne Labs Value: Wholesale priced products! Your Fiberdyne Labs Representative is: ACCESSORIZE with Fiberdyne Labs! Place business card or label here

3 TM Table of Contents/Product Index (continued): Fiber Cleaning Kits and accessories 92 Fiber Characterization Service 90 Fiber Identifier 95 FTTH ( Fiber to the home ) GBICs 114,115 High Insolation WDM 16,17 Kim Wipes 92 Launch Box / Pulse Suppression Box 93 Loopback Attenuators 48 Light Source 96 Inspection Scope 92 Mating Sleeves 80 Media Converters Mode Conditioning Cables, Adapter 62,63 Military / Industrial Fiber Assemblies 60 MTP Solution ( MTP is a registered trademark 84,85 of US Conec, LTD ) Network Analyzer Interface Module 38,39 Node Entrance Cables 50,51 Patchcords, Cat 5e, Cat 6 116,117 Patchcords, Fiber Optics Patch Panels, Cat 5e, Cat Patch Panels, Fiber Optic 78,79,81 Pigtails, ( Simplex 3mm, 900um, Packs, 12 Packs, etc..) Pigtails, Pre-terminated backbone / multifiber Pre-terminated backbone cable Power Meters 97 Rackmount Fiber Enclosures 78,79,81 SFPs Simplex Fiber Optic Cable, bulk 76,77 Sonet Add / Drop Regeneration Mux/Demux 34,35 Splice Enclosure; Outside Plant, FTTH 87 Splice Enclosure, Rackmount 78,79 Splice Enclosure, Wallmount 78,79,83 Splice Module 79 Splice Sleeves 81 Splice Trays 78,79,83 Splitters: see Couplers / Splitters ( List ) Switches 100, Tera Flow Jumpers ( bend insensitive ) 56,57 Terminator Splice Enclosure 83 Terminators 49 Test Box 93 Test Equipment Visual Fault Locator 94 Wall Mount Enclosures 78,79,81 Wall Mount Splice Enclosures 78,79,81 WDM 16,17 Fiberdyne Labs, Inc. Rebuilding the Global Information Infrastructure Fiberdyne Labs Delivers; Top Quality Wholesale Price SPECIFY Fiberdyne Labs Brand! Fast Delivery Value Added Service Fiberdyne Labs is a world wide supplier! 1. Order Information: Minimum order $ Terms: 30 days net. FOB: Frankfort, New York. Mastercard, American Express, and Visa accepted. In all cases, freight will be charged for all products shipped. Overdue accounts are subject to a 2% monthly finance charge. In case of price deviations, notification will be made prior to processing order. Photographs may not accurately portray present product. Quantity discounts available on all items upon request. First time orders for new accounts cannot be processed unless accompanied by a completed credit application. Please allow 2 working days for your application to be processed. TERMS: Net 30 days from date of invoice unless otherwise stated. 2. Order Discrepancy: Any discrepancies with an order must be reported to Fiberdyne Corporate Headquarters in Frankfort, New York within 24 hours of receipt. Returned Merchandise Authorization (RMA) numbers must be requested within 2 days of receipt of your products and returned to Corporate Headquarters in Frankfort, New York within 6 days from receipt of goods. All products returned must be marked with a Fiberdyne RMA number, be new, unopened, and full shipping unit quantities. Credit cannot be issued without a Fiberdyne Authorized RMA. Custom made and uncataloged items will not be accepted for return. Fiberdyne reserves the right to change a restocking fee. 3. IMPORTANT NOTICES: Prices subject to change without notice. All statements, technical information and recommendations related to the Seller s products are based on information believed to be reliable but the accuracy or completeness there of is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. 4. Liability: THE USER ASSUMES ALL RISKS AND LIABILITY WHAT SO EVER IN CONNECTION WITH SUCH USE. ANY STATEMENTS OF RECOMMENDATIONS OF THE SELLER WHICH ARE NOT CONTAINED IN THE SELLER S CURRENT PUBLICATIONS SHALL HAVE NO FORCE OR EFFECT UNLESS CONTAINED IN AN AGREEMENT(S) SIGNED BY AN AUTHORIZED OF- FICER OF SELLER. THE STATEMENTS CONTAINED HEREIN ARE MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. THE SELLER IS NOT RESPON- SIBLE FOR ANY COST DAMAGE AS A RESULT OF DELAYED DELIVERY. SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABIL- ITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER S PRODUCTS THAT WERE DEFECTIVE. Established 1992 QUALITY ISO Certified Quality you can depend on RoHS Compliant Products Available GSA Contract Holder GS-35F-4780H s r r GOVT. VISA Check out our New products online at Fiberdyne.com under advertised products! Fiberdyne Labs Your trusted supplier with quality you can depend on! FIBERDYNE page 3 final.indd 1 12/12/07 9:40:49 AM

4 Singlemode Single Window Splitter/Coupler 1550nm Optical Spectrum Analyzer Results Single Window Couplers 1x2, 900 Micron, Medium Duty Coupler 2x2, 900 Micron, Medium Duty Coupler * Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available. 1310nm Optical Spectrum Analyzer Results 1x2, 3mm Jacketed, Heavy Duty Coupler * Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available. Part Number Split Ratio Max. Insert. Loss FSC-XXX-050-XXX 50/ /3.22 FSC-XXX-049-XXX 49/ /3.14 FSC-XXX-048-XXX 48/ /3.05 FSC-XXX-047-XXX 47/ /2.97 FSC-XXX-046-XXX 46/ /2.89 FSC-XXX-045-XXX 45/ /2.81 FSC-XXX-044-XXX 44/ /2.73 FSC-XXX-043-XXX 43/ /2.65 FSC-XXX-042-XXX 42/ /2.57 FSC-XXX-041-XXX 41/ /2.50 FSC-XXX-040-XXX 40/ /2.42 FSC-XXX-039-XXX 39/ /2.35 FSC-XXX-038-XXX 38/ /2.28 FSC-XXX-037-XXX 37/ /2.21 FSC-XXX-036-XXX 36/ /2.14 FSC-XXX-035-XXX 35/ /2.07 FSC-XXX-034-XXX 34/ /2.01 (Part number matrix on page 5) Features: Low PDL Low Insertion Loss Excellent Uniformity High Directivity Bi-directional Exact Splits 1-50 Part Number Split Ratio Max. Insert. Loss FSC-XXX-033-XXX 33/ /1.94 FSC-XXX-032-XXX 32/ /1.88 FSC-XXX-031-XXX 31/ /1.81 FSC-XXX-030-XXX 30/ /1.75 FSC-XXX-029-XXX 29/ /1.69 FSC-XXX-028-XXX 28/ /1.63 FSC-XXX-027-XXX 27/ /1.57 FSC-XXX-026-XXX 26/ /1.51 FSC-XXX-025-XXX 25/ /1.45 FSC-XXX-024-XXX 24/ /1.39 FSC-XXX-023-XXX 23/ /1.33 FSC-XXX-022-XXX 22/ /1.28 FSC-XXX-021-XXX 21/ /1.22 FSC-XXX-020-XXX 20/ /1.17 FSC-XXX-019-XXX 19/ /1.11 FSC-XXX-018-XXX 18/ /1.06 FSC-XXX-017-XXX 17/ /1.01 2x2, 3mm Jacketed, Heavy Duty Coupler Specifications: Center Wavelength 1310,1550 Narrow Band nm Excess Loss 0.07 db Max. Directivity 50 db Min. Operating Temperature -40 C to +85 C < -65 db Back Reflection EXACT SPLITTER/COUPLER MAX. INSERTION LOSS RATIOS Dimensions: Packages 250 um 0.13" x 2.2" 900 um 0.13" x 2.2" 3 mm 4" x 0.6" x 0.3" Part Number Split Ratio Max. Insert. Loss FSC-XXX-016-XXX 16/ /0.95 FSC-XXX-015-XXX 15/ /0.90 FSC-XXX-014-XXX 14/ /0.85 FSC-XXX-013-XXX 13/ /0.80 FSC-XXX-012-XXX 12/ /0.75 FSC-XXX-011-XXX 11/ /0.70 FSC-XXX-010-XXX 10/ /0.65 FSC-XXX-009-XXX 09/ /0.60 FSC-XXX-008-XXX 08/ /0.56 FSC-XXX-007-XXX 07/ /0.51 FSC-XXX-006-XXX 06/ /0.46 FSC-XXX-005-XXX 05/ /0.42 FSC-XXX-004-XXX 04/ /0.37 FSC-XXX-003-XXX 03/ /0.32 FSC-XXX-002-XXX 02/ /0.28 FSC-XXX-001-XXX 01/ / p indd 4 12/12/07 10:21:37 AM

5 Singlemode Single Window Splitter/Coupler FIBER OPTIC SPLITTER/COUPLER CUSTOM ORDERING INFORMATION F S C - X X X - X X X - X X X FSC = Fiberdyne Labs Single Window Couplers 4th. Digit Center Wavelength nm nm 5th. Digit Ports 1-1x2 2-2x2 3-1x3 6th. Digit Package um 0.13 x um 0.13 x mm 4 x 0.6 x 0.3 Y - Y cable (1x2, 3mm, 1 meter overall length) 7th. Digit Grade 0 - Exact 1 - Premium 2 - Standard 8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 24 = 24/76 50 = 50/50 10th. Digit Fiber Type 0 - Corning SMF 28e 11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs) 12th. Digit Overall Length 1 = 1 Meter (.5 meter input,.5 output) 2 = 2 Meters (1 meter input, 1 output) 2 x 2, 250um 1x2, 250um Jacketed, Light Duty Coupler 1x3, 3mm Jacketed, Heavy Duty Coupler (Also available in 900um and 250um) Corning is a registered trademark of Corning Incorporated. SMF 28e is a registered trademark of Corning Incorporated. 5 p indd 5 12/12/07 10:22:05 AM

6 L-Band Splitter/Coupler L-Band Tap Couplers 1x2, 900 Micron, Medium Duty Coupler 1x2, 3mm Jacketed, Heavy Duty Coupler 2x2, 900 Micron, Medium Duty Coupler 2x2, 3mm Jacketed, Heavy Duty Coupler Features Specifications Dimensions Low PDL Low Insertion Loss Excellent Uniformity High Directivity Bi-directional Exact Splits 1-50 Center Wavelength 1590nm Narrow Band +/- 10 nm Excess Loss 0.07 db Max. Directivity 50 db Min. Operating Temperature -40C to +85 C < -65 db Back Reflection L-BAND SPLITTER/COUPLER MAX. INSERTION LOSS RATIO Part Number Split Ratio Max. Insertion Loss FLC-XXX-001-XXX 01/ /0.24 FIBER OPTIC SPLITTER/COUPLER CUSTOM ORDERING INFORMATION F L C X X X Digits = FLC = Fiberdyne Labs L-Band Tap Couplers Packages 250 um 0.13 x um 0.13 x mm 4 x 6 x 0.3 4th. Digit Center Wavelength nm 5th. Digit Ports 1-1x2 2-2x2 6th. Digit Package um 0.13 x um 0.13 x mm 4 x 0.6 x 0.3 Y - Y cable (1x2, 3mm, 1 meter overall length) 7th. Digit Grade 1 - Premium 8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 01 = 01/99 50 = 50/5 10th. Digit Fiber Type 0 - Corning SMF 28e 11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC 12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meters 6 Corning is a registered trademark of Corning Incorporated. SMF 28e is a registered trademark of Corning Incorporated. p indd 6 12/12/07 10:22:25 AM

7 C-Band Splitter/Coupler 1550nm Optical Spectrum Analyzer Results C-Band Splitter/Coupler * C-Band Splitter/Coupler * Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available. 1x2, 900 Micron, Medium Duty Coupler 2x2, 900 Micron, Medium Duty Coupler 1x2, 3mm Jacketed, Heavy Duty Coupler 2x2, 3mm Jacketed, Heavy Duty Coupler Features Specifications Dimensions Low PDL Low Insertion Loss Excellent Uniformity High Directivity Bi-directional Exact Split ratios 99:1 thru 50:50 Center Wavelength 1550nm Narrow Band +/- 10nm Excess Loss 0.07 db Max. Polarization Dependent Loss 0.1dB Max. Directivity 50 db Min. Operating Temperature -40 C to +85 C Package 250um 0.13 x um 0.13 x 2.2 3mm 4 x 0.6 x 0.3 1x3, 3mm Jacketed, Heavy Duty Coupler F C C - 0 X X - 0 X X - X X X Digits = FCC = Fiberdyne Labs C-Band Couplers FIBER OPTIC COUPLERS/EXACT COUPLERS CUSTOM ORDERING INFORMATION 4th. Digit Center Wavelength nm 5th. Digit Ports 1-1x2 2-2x2 3-1x3 6th. Digit Package um 0.13 x um 0.13 x mm 4 x 0.6 x 0.3 Y - Y cable (1x2, 3mm, 1 meter overall length) 7th. Digit Grade 0 - Exact 1 - Premium 2 - Standard 8th. & 9th. Coupling Ratio Specify First Two Digits i.e. 76 = 76/24 50 = 50/50 Digits 10th. Digit Fiber Type 0 - Corning SMF 28 e 11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC 12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meters Corning is a registered trademark of Corning Incorporated. SMF 28e is a registered trademark of Corning Incorporated. 7 p indd 7 12/12/07 10:22:45 AM

8 Dual Window Splitter/Coupler Optical Spectrum Analyzer Results * Top Trace Reference. * Bottom Trace Results. DUAL WINDOW COUPLER SPECIFICATIONS Ultra & Standard Premium Center Wavelength 1310, 1550 Bandwidth +/- 40 nm Excess Loss Max. Polarization Dependent Loss Max. 0.1dB 0.15dB 0.3dB 0.2dB Directivity 50 db Min. Operating Temperature -40 C to + 85 C Dual Window Ultra Coupler Insertion Loss Values Part Number Split Ratio Min. Insertion Loss Max. Insertion Loss FDC-XXX-050-XXX 50/ / /3.30 FDC-XXX-045-XXX 45/ / /2.88 FDC-XXX-040-XXX 40/ / /2.49 FDC-XXX-035-XXX 35/ / /2.14 FDC-XXX-030-XXX 30/ / /1.81 FDC-XXX-025-XXX 25/ / /1.51 FDC-XXX-020-XXX 20/ / /1.22 FDC-XXX-015-XXX 15/ / /0.96 FDC-XXX-010-XXX 10/ / /0.71 FDC-XXX-005-XXX 05/ / /0.47 FDC-XXX-001-XXX 01/ / /0.29 DUAL WINDOW PREMIUM COUPLER INSERTION LOSS VALUES Part Number Split Ratio Min. Insertion Loss Max. Insertion Loss FDC-XXX-150-XXX 50/ / /3.57 FDC-XXX-145-XXX 45/ / /3.12 FDC-XXX-140-XXX 40/ / /2.72 FDC-XXX-135-XXX 35/ / /2.35 FDC-XXX-130-XXX 30/ / /2.00 FDC-XXX-125-XXX 25/ / /1.69 FDC-XXX-120-XXX 20/ / /1.39 FDC-XXX-115-XXX 15/ / /1.12 FDC-XXX-110-XXX 10/ / /0.86 FDC-XXX-105-XXX 05/ / /0.61 FDC-XXX-101-XXX 01/ / / DUAL WINDOW STANDARD COUPLER INSERTION LOSS VALUES Part Number Split Ratio Min. Insertion Loss Max. Insertion Loss FDC-XXX-250-XXX 50/ / /3.77 FDC-XXX-245-XXX 45/ / /3.32 FDC-XXX-240-XXX 40/ / /2.92 FDC-XXX-235-XXX 35/ / /2.55 FDC-XXX-230-XXX 30/ / /2.20 FDC-XXX-225-XXX 25/ / /1.89 FDC-XXX-220-XXX 20/ / /1.59 FDC-XXX-215-XXX 15/ / /1.32 FDC-XXX-210-XXX 10/ / /1.06 FDC-XXX-205-XXX 05/ / /0.81 FDC-XXX-201-XXX 127 Business 01/99 Park Drive., Frankfort, 18.24/0.00 NY /0.62 p indd 8 12/12/07 10:23:03 AM

9 Singlemode Dual Window Part Number Information FIBER OPTIC COUPLER ORDERING INFORMATION F D C - X X X - X X X - X X X F D C FDC = Fiberdyne Labs Dual Window Couplers 4th. Digit Center Wavelength / 1550 nm 5th. Digit Ports 1-1x2 2-2x2 6th. Digit Package um 0.13 x um 0.13 x mm 4 x 0.6 x 0..3 Y - Y cable (1x2, 3mm, 1 meter overall length) 7th. Digit Grade 0 - Ultra 1 - Premium 2 - Standard 8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 75=75/25 50= 50/50 10th. Digit Fiber Type 0 - Corning SMF 28e 11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC 12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meters Part Number Ordering Example: FDC This gives you a Fiberdyne Labs 1310/1550nm wavelength coupler, 1x2, 900 um, Premium, 45/55 Coupling Ratio, Corning SF 28e, SC connectors, 2 meters long. Corning is a registered trademark of Corning Incorporated. SMF 28e is a registered trademark of Corning Incorporated. 9 p indd 9 12/12/07 10:23:21 AM

10 Multimode Splitter/Coupler 10 Conventional MM Splitters/Coupler Introduction: Fiberdyne Splitter/Coupler devices are bi-directional. If they are used to combine signals then they are couplers. If they are used to divide a signal then they are splitters. Note: both terms are often used, interchangeably, to mean the same device. The multimode splitter/coupler, are typically applied to applications which use an overfilled launch (OFL). An OFL example is the LED transmitter, typically used in 10Base and 100 Base Ethernet multimode fiber links. An OFL fills the modes of the multimode fiber. These multimode splitter/couplers/work best with OFL configurations. Note: New high-speed, multimode fiber links (e.g.1000 Base-SX) use lasers. Typically, these 850-nm sources are VCSELs (vertical cavity surface emitting lasers). VCSELs do not provide an OFL into multimode fiber; they do not fill the mode-structure of the multimode fiber. For these applications, Fiberdyne recommends their Laser Multimode splitter/coupler. Features: Multimode dual window (850/1300nm) Light Duty (250mn) Medium Duty (900 Micron) or Heavy Duty (3 mm Jacket) Packaged Couplers are also available in modules. (see page 13.) 1x2, 900 Micron, Medium Duty Coupler 2x2, 900 Micron, Medium Duty Coupler 1x2, 3mm Jacketed, Heavy Duty Coupler. 2x2, 3mm Jacketed, Heavy Duty Coupler. ORDERING INFORMATION F M C - X X X - X X X - X X X FMC - Fiberdyne Labs Dual Window Multimode Couplers 4th. Digit Center Wavelength 1 = 850/1300nm 5th. Digit Ports 1 = 1x2 2 = 2x2 6th. Digit Package 0 = 250um x = 900um x = 3mm -- 4 x 0.6 x 0.3 Y - Y cable (1x2, 3mm) 7th. Digit Grade 1 = Premium 8th. & 9th. Digit Coupling Ratio Specify First 2 Digits e.g. 25 = 25/75 50 = 50/50 10th. Digit Fiber Type 0 = 50/125 1 = 62.5/125 11th. Digit Connectors 0 = None 1 = FC 3 = SC 5 = ST 7 = LC X = Custom Configuration (List as Special Instruction ) (e.g. SC Input to FC Output) 12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meter Multimode Coupler Modules Maximum Insertion Loss Part Number Split Ratio Number of Maximum Max. Insertion Loss Ports Insertion Loss 850/1300nm Per output port FMC-11X-150-1X1 50/50 4.1/4.1 2x2 4.1 FMC-11X-155-1X1 55/45 3.6/4.5 1x2 4.1 FMC-11X-160-1X1 60/40 3.1/5.1 1x4 8.3 FMC-11X-165-1X1 65/35 2.7/5.7 1x8 11 FMC-11X-170-1X1 70/30 2.4/6.3 1x16 15 FMC-11X-175-1X1 75/25 2.2/7.1 1x32 18 FMC-11X-180-1X1 80/20 1.8/8.1 Operating Temperature: FMC-11X-185-1X1 85/15 1.5/ C to +75 C FMC-11X-190-1X1 90/10 1.3/11.5 Directivity: >40dB FMC-11X-195-1X1 95/05 1.0/14.5 * Insertion loss values do not include connector loss p indd 10 12/12/07 10:23:39 AM

11 Laser Multimode Splitter/Coupler Laser Multimode Splitter/Coupler Introduction: With the advent of gigabit networks, multimode fiber (MMF) links are using laser transmitters. These transmitters do not fill the mode-structure of MMF like LEDs. Therefore, traditional FBT (fused biconic taper), multimode couplers and splitters do not function correctly. Fiberdyne's Laser multimode splitters function correctly with the restricted mode structure of laser transmitters (e.g. VCSELs, vertical cavity surface emitting lasers), which are typically used in 1Gb and 10Gb multimode data links. Now you can add monitoring to your high-speed multimode links using Fiberdyne laser-optimized multimode splitter/coupler. Features: Multimode for 850-nm Laser links (e.g.1000base-sx) Fiber Pigtails are available Medium Duty (900 Micron) or Heavy Duty (3 mm Jacket) Packaged Couplers are also available in modules. (see page 13.) Multimode Coupler Modules Maximum Insertion Loss (Even Splits) Number Maximum of Ports Insertion Loss (db)* Per output port 1x x x x8 11 2x2 4.1 Operating Temperature: -20 C to +75 C Directivity: >40dB *Insertion loss values do not include connector loss 1x2, 900 Micron, Medium Duty Coupler 2x2, 900 Micron, Medium Duty Coupler 2x2, 3mm Jacketed, Heavy Duty Coupler. ORDERING INFORMATION F L M - X X X - X X X - X X X FLM - Fiberdyne Labs Laser Multimode Couplers 4th. Digit Center 1 = 850nm Wavelength 5th. Digit Ports 1 = 1x2 2 = 2x2 6th. Digit Package 1 = Medium Duty x = Heavy Duty -- 4 x 0.6 x 0.3 Y - Y cable (1x2, 3mm, 1 meter overall) 7th. Digit Grade 1 = Premium 8th. & 9th. Digit Coupling Ratio 50 = 50/50 60 = 60/40 67 = 67/33 70 = 70/30 80 = 80/20 90 = 90/10 10th. Digit Fiber Type 0 = 50/125 (using OM3 fiber) 1 = 62.5/125 11th. Digit Connectors 0 = None 1 = FC 3 = SC 5 = ST 7 = LC 8 = Other (Specify) (e.g. SC Input to FC Output) 12th. Digit Overal Length 1 = 1 Meter 2 = 2 Meter Part Number Split Ratio Max. Insertion 850 * FLM-11X-150-1X1 50/50 4.1/4.1 FLM-11X-160-1X1 60/40 3.3/5.3 FLM-11X-167-1X1 67/33 3.0/6.0 FLM-11X-170-1X1 70/30 2.7/6.6 FLM-11X-180-1X1 80/20 2.0/8.5 FLM-11X-190-1X1 90/10 1.6/11.6 * Insertion Loss values do not include connector loss 1x2, 3mm Jacketed, Heavy Duty Coupler. 11 p indd 11 12/12/07 10:25:04 AM

12 Splitter/Coupler Modules 19 Rack Mount Module Splitter/Coupler Modules Fiberdyne Labs, Inc. manufactures a complete family of splitter/coupler modules. Select from 19 Rack Mount modules, Wallmount Modules, or Corning, Lucent, and ADC compatible modules, including Corning Reduced Splice Tray modules. Select 1x2 to 1x32 outputs with the wavelengths and insertion loss of your choice and with the optical splits you require. 1x32 Rack Mount Module ADC Compatible Splitter/Coupler Module Splice Tray Style Wall Mountable Splitter/Coupler Module Fiberdyne Labs splitter/couplers are designed to exceed your expectations. They are excellent for use with DWDM s, EDFA s and other linear bandwidth applications requiring minimal broadband db SPECIFICATIONS: SINGLEMODE MAX. INSERTION LOSS (IL) (without connectors) Coupler Module Split Exact Ultra Premium Standard 1x x x x x Coupler Module Loss table does not include connector or adapter loss. ONLINE: /products/coplmodl.html Technical Data Sheet (Generic) Technical Data Sheet (Custom) Coupler Reference Drawing Corning is a registered trademark of Corning Incorporated Lucent is a registered trademake of Lucent Technologies ADC is a registered trademark of ADC Telecommunications 12 p indd 12 12/12/07 10:25:31 AM

13 Splitter/Coupler Module Ordering Information 2nd. Digit Center Wavelength 0 = 1550 nm Singlemode 2 = 1310 nm Singlemode 3 = 1310/1550 Singlemode 7 = 850/1300 Multimode 9 = 850 nm Laser Multimode 3rd. Digit Ports 1 = 1x2 A = 1x11 2 = 1x3 B = 1x12 3 = 1x4 C = 1x13 4 = 1x5 D = 1x14 5 = 1x6 E = 1x15 6 = 1x7 F = 1x16 7 = 1x8 G = 1x32 8 = 1x9 H = 2x2 9 = 1x10 J = ( 2 ) 1x2 K = 1x18 L = 1x24 M = 2x4 PART A F X X - X X X X X - X X F Fiberdyne Labs, Inc. Splitter Modules 4th. Digit Package 0 = Lucent /Fiberdyne compatible with input pigtail, output adapters. 1 = Lucent /Fiberdyne compatible with input adapters, output adapters. 2 = Lucent /Fiberdyne compatible with input pigtail, output pigtail. 3 = Corning FDC compatible with input pigtail, output adapters. 4 = Corning FDC compatible with input adapter, output adapter. 5 = Corning FDC compatible with input pigtail, output pigtails. 6 = Corning Reduced Fusion Splice Tray compatible with pigtail input, pigtail output. 7 = 19 Rackmount Module. 8 = Customer requested special. 9 = Wall Mount Module. A = ADC Module. C = Corning Eclipse compatible with input adapter, output adapter. D = Splitter/Coupler Tray Fiberdyne Labs. Note: All trademarks are property of their respective owners. Corning is a registered trademark of Corning Incorporated Eclipse is a registered trademark of Corning Incorporated SMF-28e is a registered trademark of Corning Incorporated ADC is a registered trademark of ADC Telecommunications Lucent is a registered trademake of Lucent Technologies 5th. Digit Grade 0 = Exact (sm, single window) 1 = Ultra (sm, dual window) 2 = Premium 3 = Standard 6th. Digit Fiber Type 0 = Corning SMF-28e 1 = Corning Multimode 2 = Corning mm 50/125 7th. Digit Connector 0 = None 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 7 = Specify L = LC N = LC/APC Type Input 8th. Digit Connector 0 = None 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 7 = Specify L = LC N = LC/APC Type Output 9th. Digit Length Input 0 = Adapter 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m 10th. Digit Length Output 0 = Adapter 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m Part A Part B F ,25,25,15,10 Part A of this number (F ) gives us a Fiberdyne Labs Singlemode, Dual Wavelength (1310/1550 nm),1x5, 19 Rackmount module with input pigtails, output pigtails, standard grade coupler using Corning SMF-28e fiber, SC connectors on the input, SC connectors on the output, input length 1 meter, and output length 2 meters. Part B of this number (25, 25, 25, 15, 10) gives us the split ratio values which must add up to 100% ORDERING INFORMATION PART B Split Ratio SR,SR,SR,...N 1st. Digit(s) 2nd. Digit(s) 3rd. Digit(s) 4th. Digit(s) 5th. Digit(s) 6th. Digit(s) Values must add up to 100% 1st. Split Ratio 2nd. Split Ratio 3rd. Split Ratio 4th. Split Ratio 5th. Split Ratio nth. Split Ratio 13 p indd 13 12/12/07 10:25:48 AM

14 Planar Splitter/Coupler Module Planar Coupler/Splitter LGX/Lucent Compatible Module Rackmount (1x32) Module Purpose: Coupler Module: to combine optical power from two or more inputs. Splitter Module: to divide optical power to two or more outputs. Conceptual Usage: Couplers are typically used where an aggregate of optical power is required. Splitter applications are more common, typically used for video distribution or for data network monitoring. Inputs are divided and sent to several destinations (e.g. neighborhoods for CATV). Alternatively, a low power signal sample is readout with minimal impact to the link. Planar technology is the latest in passive, fiberoptic component manufacturing. It uses semiconductor (i.e. integrated circuit, IC) techniques, to build compact, fiber-optic devices. This technique displaces fused-biconical taper devices for high-count splitters (e.g. 1x32) The resulting devices are smaller and more robust. Standard Configuration: Module Port Box Faceplate Qty* LGX/Lucent-compatible 1x4 singlewide Single-wide Double-wide 1x H x 2.25 W x 4.98 D (101 x 57 x 127 mm) Triple-wide 1x H x 3.38 W x 4.98 D (101 x 86 x 127 mm) Rackmount 19/23-inch 1x4 1x8, 1x16, 1x32 2x6 2x H x 17.0 W x 5.94 D (44 x 432 x 151 mm) 5.06 H x 2.25 W (129 x 57 mm) 5.06 H x 3.38 W (129 x 86 mm) 1.72 H x 17.0 W (44 x 432 mm) Note*: Other configurations available, including smaller modules with pigtails. Features: Splitter/Coupler components comply with Telcordia GR-1209 Connectors comply with Telcordia GR-326 Standard Fiber Connectors: SC, ST, FC, LC, MT-RJ, MTP Lucent is a registered trademake of Lucent Technologies ADC is a registered trademark of ADC Telecommunications MTP is a registered trademake of US Conec, Ltd. Polish Type: UPC or APC (as applicable) 14 p indd 14 12/12/07 10:26:06 AM

15 Planar Splitter/Coupler Module Ordering Information * Technical Data Sheet available online at PART A F X X - X X X X X - X X Fiberdyne Labs, Inc. Planar Splitter 2nd. Digit Center P = Planar 1310/1550 Singlemode Wavelength 3rd. Digit Ports 1 = 1x4 2 = 1x8 3 = 1x16 4 = 1x32 5 = 2x32 6=2x16 4th. Digit 0 = Lucent /Fiberdyne compatible with input pigtail, output adapters 1 = Lucent /Fiberdyne compatible with input adapters, output adapters 2 = Lucent /Fiberdyne compatible with input pigtail, output pigtail 3 = Corning FDC compatible with input pigtail, output adapters 4 = Corning FDC compatible with input adapter, output adapter. 5 = Corning FDC compatible with input pigtail, output pigtails. 6 = Corning Reduced Fusion Splice Tray compatible with pigtail input, pigtail output. (max. 1x4) 7 = 19 Rackmount Module 8 = Customer requested special. 9 = Wall Mount Module A = ADC Module B = Lucent with Rear Entry Corning is a registered trademark of Corning Incorporated FDC is a registered trademark of Corning Incorporated Eclipse is a registered trademark of Corning Incorporated SMF-28e is a registered trademark of Corning Incorporated Lucent is a registered trademake of Lucent Technologies ADC is a registered trademark of ADC Telecommunications C = Corning Eclipse compatible with input adapter, output adapter. D = Splitter/Coupler Tray (max. 1x4) E = Aerial Enclosure 24 Fiber F = Aerial Enclosure 36 Fiber P = Pedestal V = Pedestal with Vault 5th. Digit Grade 1 = Ultra 6th. Digit Fiber Type 0 = Corning SMF-28e 7th. Digit Connector Type Input 0 = None 4 = SC/APC 1 = FC 5 = ST 2 = FC/APC L = LC 3 = SC 7 = Specify 8th. Digit 9th. Digit Connector Type Output Overall Length Input 0 = None 4 = SC/APC 1 = FC 5 = ST 2 = FC/APC L = LC 3 = SC 7 = Specify 0 = Adapter 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m 10th. Digit Overall Length 0 = Adapter 1 = 1 m 2 = 2 m Output 3 = 3 m 4 = 4 m 5 = 5 m 15 p indd 15 12/12/07 10:26:22 AM

16 Wave Division Multiplexers Low Insertion Loss Medium Duty, 900 Micron WDM Modules Available Select Premium and High Isolation Grades Heavy Duty, 3mm Jacketed WDM Custom Configurations Available High Isolation Heavy Duty, WDM Module with 3mm Leads Wavelength Division Multiplexers (WDMs) enable end-users to coverage channels of light in premium and high isolation grades. Available in premium grade 1310/1550nm variations, select from light, medium and heavy duty. Also available are WDM Modules for wall and rack mounts, as well as termination boxes. All WDMs are terminated with your requirements in mind and custom connectorization is available upon request. Ask your Fiberdyne sales representative about custom requirements you may have. Wavelength Division Multiplexer Specifications Type/Grade Premium High-Isolation Wideband Center Wavelength (nm) 1310/ / /1550 Wavelength Range (nm) ± 10 ± 15 ±50 Insertion Loss (db)* <0.4 <0.8 <0.8 Isolation (db) >17 >34 >45 Polarization Dependant Loss (db) <0.1 <0.1 <0.1 Directivity (db) >60 >60 >55 Return Loss (db) >65 >65 >55 Hi Isolation Case Only Wide Band and FTTH Available in modules, see page Operating Temperature ( C) -40 TO TO TO +65 Storage Temperature ( C) -40 TO TO TO Toll Free: Fax: sales@fi berdyne.com p indd 16 12/12/07 10:26:45 AM

17 WDM Part Number Matrix SINGLEMODE FUSED WAVELENGTH DIVISION MULITPLEXER F X X X S X 0 X X F = Fiberdyne Labs 2nd Digit Grade P - Premium H - High Isolation 3rd Digit Type A - Fused-BiConical Taper 4th Digit Package L - Light Duty (See Packaging Table) M - Medium Duty H - Heavy Duty Y - Y Cable, 1 meter length 5th Digit Fiber Type S - Singlemode 6th & 7th Digits Configuration 12-1 X 2 8th & 9th Digits Center Wavelength # nm 10th & 11th Digits Center Wavelength # nm 12th Digit Connector Type 0 - None 1 - ST/UPC 7 - FC/UPC A - FC/APC 6 - SC/UPC B - SC/APC 13th Digit Reserved 0 - Reserved 14th Digit Overall Length Specify (1 or 2 TYPICAL) 15th Digit Length Unit M - Meter (1 or 2 Overall Length) F - Feet NEW! WDM Patchcord Y Cable Packaging Table L - Light duty (250um, 0.13 x 2.2") M - Medium duty (900um, 0.13 x 2.2") H - Heavy duty (3mm, 4" x 0.6 x 0.3") Y - Y cable (3mm, 1 x 2 only) *Only available in premium grade 17 p indd 17 12/12/07 10:27:04 AM

18 Fiberdyne Labs WDM Modules All WDMs are available as standard or high isolation; please call for high isolation specifications. Fiberdyne Labs, Inc. manufactures a complete family of WDM Modules. Select from 19 Rack Mount Modules, Wallmount Modules, or Corning, Lucent, and ADC compatible modules, including Corning Reduced Splice Tray modules. ADC Compatible WDM Module Wall Mountable Module 3mm WDM Module High Isolation WDM Module TECHNICAL DATA SHEET AVAILABLE ONLINE WDM Module Specifications High Isolation Wide Band FTTX Wavelength & Bandwidth nm 1310/ / Insertion Loss (without connectors) Max. db Isolation Min. db Wavelength Bandwidth nm Polarization Dependent Loss Max. db Directivity Min. db Corning is a registered trademark of Corning Incorporated FDC is a registered trademark of Corning Incorporated Eclipse is a registered trademark of Corning Incorporated SMF-28e is a registered trademark of Corning Incorporated Lucent is a registered trademake of Lucent Technologies ADC is a registered trademark of ADC Telecommunications 18 p indd 18 12/12/07 10:27:25 AM

19 Fiberdyne Labs WDM Module Part Number Matrix ORDERING INFORMATION F W X X - X X X X X - X X FW = Fiberdyne Labs, Inc. Wave Division Multiplexer 3rd. Digit Center Wavelength 1 = 1310/ = High Isolation 1310/ = Wideband/High Isolation 4 = FTTX 4th. Digit Ports 1 = (1) 1x2 2 = (2) 1x2 3 = (3) 1x2 5th. Digit Package 0 = Lucent /Fiberdyne compatible with input pigtail, output adapters 1 = Lucent /Fiberdyne compatible with input adapters, output adapters 2 = Lucent /Fiberdyne compatible with input pigtail, output pigtail 3 = Corning FDC compatible with input pigtail, output adapters 4 = Corning FDC compatible with input adapter, output adapter. 5 = Corning FDC compatible with input pigtail, output pigtails. 6 = Corning Reduced Fusion Splice Tray compatible with pigtail input, pigtail output. 7 = 19 Rackmount Module 8 = Customer requested special. 9 = Wall Mount Module A = ADC Module C = Corning Eclipse compatible with input adapter, output adapter. D = High Isolation, 3mm Note: All trademarks are property of their respective owners. 6th. Digit Grade 1 = Ultra 7th. Digit Fiber Type 0 = Corning SMF-28e 8th. Digit Connector Type 0 = None 4 = SC/APC (INPUT) 1 = FC 5 = ST 2 = FC/APC 6 = D4 3 = SC 7 = Specify 9th. Digit Connector Type 0 = None 4 = SC/APC (OUTPUT) 1 = FC 5 = ST 2 = FC/APC 6 = D4 3 = SC 7 = Specify 10th. Digit Length (INPUT) 11th. Digit Length (OUTPUT) 0 = Adapter 1 = 1 Meter 2 = 2 Meters 3 = 3 Meters 4 = 4 Meters 5 = 5 Meters 0 = Adapter 1 = 1 Meter 2 = 2 Meters 3 = 3 Meters 4 = 4 Meters 5 = 5 Meters Corning is a registered trademark of Corning Incorporated FDC is a registered trademark of Corning Incorporated Eclipse is a registered trademark of Corning Incorporated SMF-28e is a registered trademark of Corning Incorporated Lucent is a registered trademake of Lucent Technologies ADC is a registered trademark of ADC Telecommunications 19 p indd 19 12/12/07 10:27:42 AM

20 Features: Epoxy-Free Optical Path Low Insertion Loss High Return Loss ITU Standard Channels DWDM (Dense Wavelength Division Multiplexer) Introduction: Wavelength Division Multiplexing (WDM) modules combine ("mux") and separate ("demux") fiber-optic signals. Three basic schemes exist: 1310/1550 WDM, Coarse WDM (CWDM) and Dense WDM (DWDM). DWDM provides the greatest capacity per fiber -- potentially hundreds of individual fiber-optic signals (channels) can be combined on a single fiber. Fiberdyne Labs offers DWDM modules in a wide variety of formats. While Fiberdyne offers some models as "standard," we will also produce customized DWDM modules. Customization can include the number and selection of DWDM channels. Additionally, modules may include tap/monitoring capability and variable attenuation. These modules may be a number of standard form factors, such as LGX, FCH, ADC (Package A), and EIA-standard 19/23 inch rackmount. DWDM is a proven technology, which offers flat channel bandwidth, flexible channel configuration, low insertion loss and high isolation. Fiberdyne Labs modules can be optically daisy-chained, to provide additional channels as bandwidth needs grow. Modules are available on the C & L bands, ITU 100GHz grid at channel spacing of 100GHz or 200GHz. Applications: Telecommunications Local Area Networks CATV Fiber Optic Links Dense Wavelength Division Multiplexing (DWDM) (ITU Grid: C-Band, 100 GHz Spacing) Channel Frequency Wavelength (#) (GHz) (nm) Note: All trademarks are property of their respective owners. Channel Frequency Wavelength (#) (GHz) (nm) Conceptual Usage: The schematic below shows how a DWDM module, with attenuation and splitter/tap, may operate. This configuration includes an "Upgrade" port. For future expansion, the upgrade port is connected to new modules, adding new channels to an existing link. This can be done without interruption of the existing links. Options: Number of channels: 1-40 channels in one module Single or multi-fiber solutions available Single-fiber: transmit and receive signals on one fiber Dual-fiber: transmit and receive signals on separate fibers 100-GHz or 200-GHz channel spacing Module formats compatible with LGX, ADC, 19/23-inch rackmount Connectors: FC, LC, SC, ST, MT-RJ Customization available: Additional filter options available, such as "Red/Blue" mux/demux filtering Unique channel selections or spacings (i.e. skip channel numbers) Cisco compatible modules mimic the function of Cisco series modules Corning is a registered trademark of Corning Incorporated CCH is a registered trademark of Corning Incorporated ADC is a registered trademark of ADC Telecommunications Cisco is a registered trademark of Cisco Systems, Inc. 20 p indd 20 12/12/07 10:28:00 AM

21 DWDM Part Number Build Matrix Per Channel Adjustable Attenuation Per Channel Tap Coupler, Rack Mountable, DWDM Module Passive Device (No Power Required) PART NUMBER FDM ,24,25,26 FDM ,25,27,29 FDM , 24, 25,26,27,28,29,30 FDM , 25,27,29,31,33,35,37 FDM ,24,25,26 FDM ,25,27,29 FDM ,24,25,26 FDM ,25,27,29 FDM , 24,25,26,27,28,29,30 FDM , 25,27,29,31,33,35,37 DESCRIPTION 4 Channel, 100GHz, DWDM, LGX Module, SC Connectors 4 Channel, 200GHz, DWDM, LGX Module, SC Connectors 8 Channel, 100GHz, DWDM, LGX Double Wide Module, SCConnectors 8 Channel, 200GHz, DWDM, LGX Double Wide Module, SC Connectors 4 Channel, 100GHz, DWDM, 19 Inch Rack Mount, SC Connectors 4 Channel, 200GHz, DWDM, 19 Inch Rack Mount, SC Connectors 4 Channel, 100GHz, DWDM, Variable Attenuation, Variable Tap, 19 Inch Rack Mount, SC Connectors (Passive Device -- No Power Required) 4 Channel, 200GHz, DWDM, Variable Attenuation, Variable Tap, 19 Inch Rack Mount, SC Connectors (Passive Device -- No Power Required) 8 Channel, 100GHz, DWDM, 19 Inch Rack Mount, SC Connectors 8 Channel, 200GHz, DWDM, 19 Inch Rack Mount, SC Connectors Fiberdyne Labs DWDM LGX modules are compatible with LGX style termination boxes. Check page 78-79, 81 for Fiberdyne Labs termination boxes. Contact your Fiberdyne Labs Representative CTM-018 CTM-018 DWDM Module Rack CTM-072 DWDM Modules DWDM Modules ADC Compatible Module DWDM LGX Compatible Single Wide Module 1-4 ITU Channels Per Module DWDM LGX Compatible Double Wide Module 1-10 ITU Channels Per Module Wall Mountable Box 100 GHz DWDM Specifications Channel Wavelength Ref. ITU Grid Channel Spacing 100 GHz (0.8nm) Channel Passband - 0.5dB 0.3 Number of Channels Add/Drop Channel Insertion Loss (db)* < = 1.5 < = 2.1 <=3.0 <=4.0 Express Channel Insertion Loss (db)* < = 0.7 < = 1.2 < = 2.5 < = 3.5 Return Loss (db) > = 45 Adjacent Channel Isolation (db) > = 30 (DeMux) Non-adjacent Channel Isolation (db) > = 40 Wavelength Temperature Stability (nm/ C) < = Insertion Loss Thermal Stability db/ C < = Channel Uniformity (db) < = 0.5 Polarization Dependent Loss (db) < = 0.2 Maximum Power Handling (mw) 250 Operating Temperature ( C) 0 to 65 Storage Temperature ( C) -40 to 85 *Note: Insertion Loss values do not include connector losses. Note: All trademarks are property of their respective owners. Corning is a registered trademark of Corning Incorporated FDC is a registered trademark of Corning Incorporated ADC is a registered trademark of ADC Telecommunications PART NUMBER INFORMATION FDX-X-XX-X-X-X-X-,... Yn X = Part Number Option Y = ITU Grid Channel Number PART NUMBER OPTIONS TABLE 3rd Digit MUX / DEMUX M = Mux D = Demux 1 = Mux/Demux 4th Digit ITU Value 0 = 100GHz 1 = 200GHz 5th & 6th Digits Number of Channels etc. 7th Digit Module Type 0 = LGX Compatible Single 1 = LGX Compatible Dual 2 = 19/23 inch Rack Mount 3 = Wall Mount 4 = ADC Compatible Module 5 = Corning FDC Compatible 8th Digit Attenuator 0 = None 1 = Variable 2 = Fixed In-Line 3dB 3 = Fixed In-Line 5dB 4 = Fixed In-Line 10dB 9th. Digit Tap Coupler 0 = No Coupler 1 = 99/1 Tap Coupler 10th. Digit Connector Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other 11th. through N Digits ITU Channels (Refer to ITU Grid) EXAMPLE: FDM ,22,23,24 This configuration gives you a Fiberdyne Labs, Inc. 4 channel, 100GHz,DWDM, SC connectors, in an LGX module, with channels 21, 22, 23, GHz DWDM Specifications Channel Wavelength Ref. ITU Grid Channel Spacing 200 GHz (1.6nm) Channel Passband - 0.5dB 0.6 Channel Number Add/Drop Channel Insertion Loss (db)* < = 1.5 < = 2.1 <=3.0 <=4.0 Express Channel Insertion Loss (db)* < = 0.7 < = 1.2 < = 2.5 < = 3.5 Return Loss (db) > = 45 Adjacent Channel Isolation (db) > = 30 (DeMux) Non-adjacent Channel Isolation (db) > = 40 Wavelength Temperature Stability (nm/ C) < = Insertion Loss Thermal Stability db/ C < = Channel Uniformity (db) < = 0.5 Polarization Dependent Loss (db) < = 0.2 Maximum Power Handling (mw) 250 Operating Temperature ( C) 0 to 65 Storage Temperature ( C) -40 to 85 *Note: Insertion Loss values do not include connector losses. 21 p indd 21 12/12/07 10:28:34 AM

22 DWDM Simplex Modules 100 GHz DWDM Specifications Channel Wavelength Ref. ITU Grid Channel Spacing 100 GHz (0.8nm) Channel Passband - 0.5dB 0.3 Number of Channels 1 Add/Drop Channel Insertion Loss (db) < = 1.0 db typ. (< 1.5 db Max.) Express Channel Insertion Loss (db) < = 0.5 db Return Loss (db) > = 45 Adjacent Channel Isolation (db) > = 25 (DeMux) Non-adjacent Channel Isolation (db) > = 40 Express Channel Isolation (db) > = 10 Directivity (db) > = 50 Insertion Loss Thermal Stability db/ C < = Wavelength Temperature Sensitivity nm/ C < = Channel Uniformity (db) < = 1.5 Polarization Dependent Loss (db) < = 0.15 PMD < = 0.1 ps Maximum Power Handling (mw) 300 Operating Temperature ( C) 0 to +65 Storage Temperature ( C) -40 to GHz DWDM Specifications Channel Wavelength Ref. ITU Grid Channel Spacing 200 GHz (1.6nm) Channel Passband 0.5dB 0.6 Number of Channels 1 Add/Drop Channel Insertion Loss (db) < = 1.0 db typ. (< 1.5 db Max.) Express Channel Insertion Loss (db) < = 0.5 db Return Loss (db) > = 45 Adjacent Channel Isolation (db) > = 25 (DeMux) Non-adjacent Channel Isolation (db) > = 40 Express Channel Isolation (db) > = 10 Directivity (db) > = 50 Insertion Loss Thermal Stability db/ C < = Wavelength Temperature Sensitivity nm/ C < = Channel Uniformity (db) < = 1.5 Polarization Dependent Loss (db) < = 0.15 PMD < = 0.1 ps Maximum Power Handling (mw) 300 Operating Temperature ( C) 0 to +65 Storage Temperature ( C) -40 to +85 DWDM Simplex Module PART NUMBER DESCRIPTION FDM Simplex, 100GHz, Add Channel 21, LGX Module with SC Connectors FDM Simplex 200GHz, Add Channel 21, LGX Module with SC Connectors Used to: 1. Multiplex (Add) one channel to an existing circuit or 2. Demultiplex (Drop) one channel from an existing circuit. One Module may be used for either purpose. Fiberdyne Labs Simplex DWDM Modules use Simplex modules as building blocks. Add channels as required, or replace individual channels economically. Dense Wavelength Division Multiplexing (DWDM) ITU Grid: C-Band, 100 GHz Spacing Channel Freq. Wavelength Channel Freq. Wavelength (#) (GHz) (nm) (#) (GHz) (nm) Note: For 200GHz spacing use either odd or even numbered channels. 22 p indd 22 12/12/07 10:28:49 AM

23 DWDM Add/Drop Modules Optical Add/Drop Module 1X2 Optical Add/Drop Module PART NUMBER INFORMATION F A M - X - X X - X - X - Y1 Y1 - Y2 Y X = Part Number Option Y1 = Add Channel Y2 = Drop Channel Fiberdyne Labs Optical Add/Drop Module (OADM) is based upon thin film filter technology and metal bonding micro optics packaging. The OADM is used to add and drop an individual channel or multiple channels in Dense Wave Division Multiplexer (DWDM) systems. FEATURES Epoxy Free Optical Path Low Insertion Loss High Stability & Reliability Low Temperature Sensitivity APPLICATIONS DWDM System Add/Drop Channels CATV Fiber Optic Links Fiber Amplifier Systems Epoxy free optical paths and proprietary packaging techniques ensure 4th. Digit Spacing 0 = 100GHz 1 = 200GHz greater product realiability. Fiberdyne 5th. & 6th. Digits Number of Channels etc. Labs OADM can, thus, be used in high power applications. 7th. Digit Module Type 0 = LGX Compatible Single wide 1 = LGX Compatible Dual wide EXAMPLE: 2 = 19/23 inch Rack Mount 3 = Wall Mount FAM This configuration gives you a 4 = ADC Compatible Module Fiberdyne Labs, Inc.100GHz, 1 5 = Corning FDC Compatible channel, Add/Drop Module with SC Module connectors, in an LGX single wide 8th. Digit Connector Type 0 = FC 1 = FC/APC 2 = SC module, with channel 21 added, & 3 = SC/APC 4 = ST 5 = LC channel 22 dropped. 6 = Other 9 & 10th. Digits Add Channel (Refer to ITU grid on page 22) 11 & 12th. Digits Drop Channel (Refer to ITU grid on page 22) Note: All trademarks are property of their respective owners. Information 100 GHz -- Add/Drop 200 GHz -- Add/Drop Central Wavelength (nm) C & L bands, ITU 100GHz grid or customer 1550 nm Window, ITU 200GHZ specification. Grid or customer specification Channel Passband > =0.2 >=0.6 In-to-Out Insertion Loss* (db) < = 0.7 < = 0.7 In-to-Drop Insertion Loss*(dB) < = 1.2 < = 1.2 Add-to-Out Insertion Loss* (db) < = 1.1 < = 1.1 Return Loss (db) > = 45 > = 45 Channel Isolation (db) (In Drop) > = 25 > = 25 Residual Isolation (db) (Dropped Channels) > = 25 > = 25 Thermal Stability Drift (nm/ C) < = < = Insertion Loss Thermal Stability (db /& C) < = < = Polarization Dependent Loss (db) < = 0.1 < = 0.1 Maximum Power Handling (mw) Operating Temperature ( C ) 0 to 60 0 to 60 Storage Temperature ( C ) -40 to to 80 *Note: Insertion loss does not include connector loss. Corning is a registered trademark of Corning Incorporated FDC is a registered trademark of Corning Incorporated ADC is a registered trademark of ADC Telecommunications 23 p indd 23 12/12/07 10:29:04 AM

24 24 FD DWDM PLATFORM Dense Wave Division Multiplexer FD Fiberdyne Labs, Inc. manufactures a Dense Wave Division Multiplexer that is 100% compatible with the Cisco ONS Series at a cost that is 50% less. Fiberdyne Labs, Inc. offers both Red and Blue compatible filters. Red Filter - a passive device comprising a 100GHz 16X1 wavelength unidirectional multiplexer and a 100GHz 1X16 wavelength unidirectional demultiplexer operating in the 1546 to 1561nm band. Blue Filter - a passive device comprising a 100GHz 16X1 wavelength unidirectional multiplexer and a 100GHz 1X16 wavelength unidirectional demultiplexer operating in the 1530 to 1545nm band. Features and Benefits: Leverages fiber optic facilites to support greater bandwidth and traffic Fast and easy deployment Compact size permits installation in space restricted environments Additional wavelengths are as simple as plugging jumpers into a patch panel Equipped with integral fiber retainers which protect bend radius and eliminate sharp edges All ports are front panel loaded for easier installation and maintenance Cost savings of 50% saves resellers and end users valuable funds Fiberdyne Labs, Inc. also offers 100% compatible OADMs (Optical Add/ Drop Multiplexers) Technical Data Sheet 100 GHz Comparison Document Online at Note: * Must Specify one DWDM Wavelength (XXXX.XX) from Table. ** Must Specify two DWDM Wavelengths (XXXX.XX & YYYY.YY) from Table. Cisco is a registered trademark of Cisco Systems,Inc. Dense Wavelength Division Mulitplexing (DWDM) ITU Grid: C-Band, 100 GHz Spacing Channel Freq. Wavelength Channel Freq. Wavelength (#) (GHz) (nm) (#) (GHz) (nm) Note: For 200GHz spacing use either odd or even numbered channels. Mux/Demux Fiberdyne Part Number Product Description FD Red ITU-100; 32 Wavelengths Red Multiplexing/Demultiplexing FD Blue ITU-100; 32 Wavelengths Blue Multiplexing/Demultiplexing Add/Drop Fiberdyne Part Number Product Description FD OADM - 1 ITU-100 GHz, 1 Channel, Dual Path, - XXXX.XX * OADM, XXXX.XX nm FD OADM - 2 ITU-100 GHz, 2 Channel, Dual Path, - XXXX.XX - YYYY.YY ** OADM, XXXX.XX-YYYY.YY nm p indd 24 12/12/07 10:29:24 AM

25 FD GHz DWDM PLATFORM FD15216-R Red Filter - a passive device comprising a 200GHz 9X1 wavelength unidirectional multiplexer and a 200GHz 1X9 wavelength unidirectional demultiplexer operating in the 1546 to 1561nm frequency band. Blue Filter - a passive device comprising a 200GHz 9X1 wavelength unidirectional multiplexer and a 200GHz 1X9 wavelength unidirectional demultiplexer operating in the 1530 to 1545nm frequency ban. Features and Benefits: Leverages fiber optic facilites to support greater bandwidth and traffic Fast and easy deployment Compact size permits installation in space restricted environments Additional wavelengths are as simple as plugging jumpers into a patch panel Equipped with integral fiber retainers which protect bend radius and eliminate sharp edges All ports are front panel loaded for easier installation and maintenance Cost savings of 50% saves resellers and end users valuable funds Fiberdyne Labs, Inc. also offers 100% compatible OADMs (Optical Add/ Drop Multiplexers) Technical Data Sheet 200 GHz Comparison Document Online at Fiberdyne Part Number FD OADM FD OADM FD OADM FD OADM FD OADM FD OADM FD OADM Product Description ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM ch nm, nm (15216-AD =compatible) ITU-200 GHZ 2-Channel, 2 path OADM Dense Wave Division Multiplexer Fiberdyne Labs, Inc. manufactures a Dense Wave Division Multiplexer that is 100% compatible with the Cisco ONS Series at a cost that is 50% less. Fiberdyne Labs, Inc. offers both Red and Blue compatible filters. Cisco is a registered trademark of Cisco Systems, Inc. Fiberdyne Product Description Part Number FD15216-DWDM-BLUE ITU-200 GHZ 9X9 blue mux/demux ( MD9-2-Blue compatible) FD15216-DWDMR-RED ITU-200 GHZ 9X9 red mux/demux ( MD9-2-Red compatible) Part Number Product Description FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM FD15216-OADM ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ITU-200 GHZ 1-Channel, 2 path OADM ch nm (15216-AD =compatible) ch nm, nm Business (15216-AD2-2- Park Drive., Frankfort, NY =compatible) 25 p indd 25 12/12/07 10:29:43 AM

26 DWDM Monitor Module Tap Purpose: To describe Fiberdyne s new rack-mount module, which separates and outputs a sample of each DWDM (Dense Wavelength Division Multiplexing) signal on a link. The sample is a small percentage of the original signal. The output is filtered, providing only the selected DWDM channel. The result is a monitoring capability which does not interfere with the link. Conceptual Usage: The Monitor Module is added to an existing multiplexed link. A set percentage of each signal is leaked to the outputs. Then, connect measurement or monitoring equipment, such as power meters or network analyzers, to the module outputs. When monitoring is complete, disconnect the instruments. The network is left undisturbed. Output low-power samples of each multiplexed signal on the link. (Unintrusive monitoring of each and every signal.) Note: Fiberdyne Monitor Modules can be used with all ITU-compliant, mux/demux modules, including Fiberdyne's mux/demux modules. Features: Channel numbers and wavelength spacing comply with ITU-T G Integrated fiber optic splitter and DWDM demultiplexer Ports clearly labeled with Channel number and with wavelength 1U high module with reversible brackets for 19-inch and 23-inch rack frames Options: Alternate channel configurations are possible Note: Insertion losses may very slightly among channels. Standard fiber-optic connectors: ST, FC, LC, SC (UPC or APC) Pigtail modules also available Standard Configurations: Two standard configurations: (100-GHz/0.8-nm spacing) 32-channel module (ITU channels 21-52) with SC connectors 40-channel module (ITU channels 20-59) with LC connectors Standard DWDM channels, according to the ITU Grid (ITU-T G.694.1) Rack-mount module, 1U high, 19/23-inch rack frames (reversible brackets) Tap percentage: 10%, 5%, and 1% Specifications: Technical Data Sheet online at 26 p indd 26 12/12/07 10:30:04 AM

27 DWDM Monitor Module Tap Part Number Build Matrix: F D M O N - X X X - X X - X X X FDMON = Fiberdyne Labs Dense - WDM Monitor-Module Digit # Description Options** 6th Channel Spacing 1 = 100 GHz 2 = 200 GHz 7th & 8th Number of channels 32 = 32-channel, Ch # s (standard) 40 = 40-channel, Ch # s (standard) (Note: for other configurations, list DWDM Channels in Special Instructions. ) 9th & 10th Tap Percentage 01 = 1% (99/01 split) 05 = 5% (95/05 split) 10 = 10% (90/10 split) 11th Package 1 = Rack-mount, 1U high, 19/23 inch 12th Connection Type 1 = Adapter, Bulkhead 2 = Pigtail, heavy-duty (e.g. 3-mm or 2-mm) 13th Connector Style 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 6 = LC X = other; must list in Special Instructions Note: add ** Special Instructions, to list custom configurations. For example: if the 7th and 8th digits are 04, then list the following. Special Instructions: 4-channels, Ch # s p indd 27 12/12/07 10:30:22 AM

28 AWG (Planar) DWDM Modules AWG (Planar) DWDM Modules Purpose: To describe Fiberdyne s Dense Wavelength Division Multiplexer (DWDM) modules, which use Arrayed Waveguide (AWG, i.e. planar ) technology Features: 100-GHz channel spacing Planer Technology - mass-production technology improves consistency Wide-Band design - maximizes uniformity in passband Athermal design for non-powered distribution nodes Standard Fiber Connectors: SC, ST, FC, LC Options: Number of ITU Grid channels: 32 or 40 Alternate fiber-optic components (e.g. tap splitters) can be combined for enhanced capabilities Multiple packaging options Rackmount modules, 19/23-inch, 1U high Aerial and Pedestal Enclosures for OSP (Outside Plant) applications Other module configurations with pigtails Connector Polish: UPC or APC (as applicable) Pigtail modules also available Part Number Build Matix F R X - X X X - X X X - X X = Part Number Option Fiberdyne Labs, Inc. AWG (Planar) DWDM Modules Part Number Options Table 3rd. Digit Mux / Demux M = Mux D = Demux 4th. Digit ITU Value 0 = 100GHz 5th. & 6th. Digits Number of Channels 32 OR 40 7th. Digit Module Type 0 = 19 Inch Rack Mount 8th. Digit Attenuator 0 = None 9th. Digit Tap Coupler 0 = No Coupler 1 = 99/1 Tap Coupler 10th. Digit Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other Please call your Sales Representative for pricing. Technical Data Sheet online at /products/awg_dwdm_module.html 28 p indd 28 12/12/07 10:30:41 AM

29 Introduction to Coarse Wavelength Division Multiplexing (CWDM) Introduction to Coarse Wavelength Division Multiplexing (CWDM) Wavelength Division Multiplexing (WDM) is a technique, which uses a special property of fiber optics. This property allows the combination of multiple signals onto a single strand of fiber. Each signal is assigned to a different wavelength of light. Since one wavelength does not affect another wavelength, the signals do not interfere. Figure 1: Typical Application of a 1310/1550 nm WDM Coarse WDMs perform two functions. First, they filter the light, ensuring only the desired wavelengths are used. Second, they multiplex or demultiplex multiple wavelengths, which are used on a single fiber link (see Figures 2a & 2b). The difference lies in the wavelengths which are used. In CWDM space, the 1310-band and the band are divided into smaller bands, each only 20nm wide. In a multiplex operation, the multiple wavelength bands are combined (i.e. muxed) onto a single fiber. In a demultiplex operation, the multiple wavelength bands are separated (i.e. demuxed) from a single fiber. The used wavelengths are defined by the International Telecommunications Union; reference ITU G for the ITU CWDM Wavelength Grid with 20nm spacing. Note: as of June 2002, eighteen center wavelengths, from 1270 nm to 1610 nm, were listed. a. b. st st Figure 2: (a) Using Mulitplexer (Mux) and (b) using a Demultiplexer (Demux). In a hybrid configuration (mux/demux), multiple transmit and receive signals can be combined onto a single fiber. Each signal is assigned a different wavelength. At each end, transmit signals are muxed, while receive signals are demuxed. For example, in a simple full-duplex link, the transmit is assigned the 1530-nm wavelength, while the receive signal is assigned the 1550-nm wavelength. Additionally, individual signals can be delivered at points along a link. A receive signal is demuxed (i.e. dropped) from the link, and a new transmit signal is muxed (i.e. added) onto the link. This application is called an Add/Drop module (see Figure 3). Figure 3: Using an Add/Drop CWDM Modulemuxing 29 p indd 29 12/12/07 10:31:07 AM

30 Introduction to Coarse Wavelength Division Multiplexing (CWDM) Continued Figure 4: Point-to-point Multiplexer Network Generally, a CWDM network takes two forms. A point-to-point system connects two locations, muxing and demuxing multiple signals on a single fiber (see Figure 4). A loop or multi-point system connects multiple locations, typically using Add/Drop modules (see Figure 5). Using Fiberdyne equipment, you can use two implementations. In one approach (see Figure 6), Fiberdyne CWDM GBICs (Gigabit Interface Converters) are added to existing Ethernet switch equipment. The GBIC outputs feed Fiberdyne, CWDM modules. The other approach (see Figure 7) adds the Fiberdyne 3001 CWDM Optical Multiplexer System to the existing outputs of existing Ethernet switch equipment. Figure 5: Add/Drop Loop Multiplexer Network Coarse Wavelength Division Multiplexing (CWDM) Grid Table of Commonly-used CWDM Wavelengths Center Wavelengths ** Cisco "Colors" Wavelength"Codes"*** 1470 Gray Violet Blue Green Yellow Orange Red Brown 61 Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths. These codes are the middle digit of the wavelength-not "channel numbers". Cisco is a registered trademark of Cisco Systems,Inc. Figure 6: Multiplexing with Fiberdyne CWDM GBICs and CWDM Modules Figure 7: Multiplexing with Fiberdyne 3001 CWDM Optical Mux System Modules Note: See pages for CWDM Multiplexer Systems. 30 p indd 30 12/12/07 10:31:35 AM

31 Fiberdyne Labs, Inc. CWDM Modules PART NUMBER INFORMATION FCX - X - X - X X - X - X - X - Y, Yn , 11 X = Part Number Option Y = ITU Grid Wavelength PART NUMBER OPTIONS TABLE 3rd. Digit MUX / DEMUX M = Mux D = Demux 1=Mux/Demux 2= Add/Drop 4th. Digit Thermal Rating 0 = Standard (-5c to +70c) 1=Athermal (Contact sales rep.) 5th. & 6th. Digits Number of Channels etc. 7th. Digit Module Type 0 = LGX Compatible Single 1 = LGX Compatible Dual 2 = 19 inch Rack Mount 3 = Wall Mount 4 = ADC Compatible Module 5 = Corning FDC Compatible Module Note: All trademarks are property of their respective owners. 8th. Digit Attenuator 0 = None 1 = Variable 2 = Fixed In-Line 3dB 3 = Fixed In-Line 5dB 4 = Fixed In-Line 10dB 9th. Digit Tap Coupler 0 = No Coupler 1 = 99/1 Tap Coupler 10th. Digit Connector Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other 11th. through Nth. Digits ITU Wavelengths (Per ITU G ) Coarse Wavelength Division Multiplexing (CWDM) Grid table of commonly used CWDM Wavelengths Center Wavelengths ** Cisco "Colors" Wavelength"Codes"*** 1470 Gray Violet Blue Green Yellow Orange Red Brown 61 Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths. These codes are the middle digit of the wavelength-not "channel numbers". Cisco is a registered trademark of Cisco Systems, Inc. Contact Your Fiberdyne Labs Representative For A Quote! EXAMPLE FCM ,1530,1550,1570 This configuration gives you a Fiberdyne Labs, Inc. 4 channel, CWDM, SC connectors, in an LGX module, with wavelengths 1510,1530,1550,1570. Notes:* Per ITU G.694.2; wavelength spacing = 20nm. **Some vendors use these codes, to describe the wavelengths. These codes are the middle digits of the wavelength-not channel numbers. 31 p indd 31 12/12/07 10:31:52 AM

32 CWDM Monitor Tap Module Purpose: To describe Fiberdyne s new rack-mount module, which separates and outputs a sample of each CWDM (Coarse Wavelength Division Multiplexing) signal on a link. The sample is a small percentage of the original signal. The output is filtered, providing only the selected CWDM channel. The result is a monitoring capability, which does not interfere with the link. (8-channel module with SC connectors) Conceptual Usage: Add the Monitor Module to existing multiplexed link. A small sample of each signal is directed to the outputs. Connect measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs. When finished monitoring, disconnect the instruments. The network is left undisturbed. Output low-power samples of each multiplexed signal from the link. (Unintrusive monitoring of each and every signal.) Note: Fiberdyne Monitor Modules can be used with all ITU-compliant, mux/demux modules, including Fiberdynes mux/demux modules. Features: Center wavelengths and spacing comply with ITU-T G Integrated fiber-optic splitter and CWDM demultiplexer Ports clearly labeled with CWDM wavelength 1U high module with reversible brackets for 19-inch and 23-inch rack frames Standard Configurations: 8-wavelength module nm, 20-nm spacing Standard CWDM wavelengths, according to the ITU-T G Rack-mount module, 1U high, 19/23-inch rack frames (reversible brackets) Alternate channel configurations are possible Note: Insertion losses may very slightly among channels. Standard fiber optic connectors: ST, FC, LC, SC (UPC or APC) Pigtail modules also available Tap percentage: 10%, 5%, and 1% Specifications: Technical data sheet online at Options: 32 p indd 32 12/12/07 10:32:24 AM

33 CWDM Monitor Tap Module Part Number Build Matrix: F C M O N - X X X - X X - X X X FCMON = Fiberdyne Labs Coarse - WDM Monitor-Module Digit # Description Options** 6th Wavelength Spacing 1 = 20nm 7th & 8th Number of wavelengths 08= 8channel, (standard nm) (Note: for other configurations, enter channel count, then list CWDM Channels in "Special Instructions.") 9th & 10th Tap Percentage 01 = 1% (99/01 split) 05 = 5% (95/05 split) 10 = 10% (90/10 split) 11th Package 1 = Rackmount, 19/23 inch 12th Connection Type 1 = Adapter, Bulkhead 2 = Pigtail, heavy-duty (e.g. 3-mm or 2-mm)*** 13th Connector Style 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 6 = LC X = other; must list in Special Instructions *** Note: **add Special Instructions, to list custom configurations. For example: if the 7th and 8th digits are 04, then list the following. Special Instructions: (7th/8th digit): 4-wavelengths nm." ***Pigtailed jacket-types are 3-mm for FC/SC/ST and 2-mm for LC. 33 p indd 33 12/12/07 10:32:40 AM

34 SONET Add/Drop Regenerator Multiplexer System Add/Drop Regenerator Multiplexer Systerm Adding 1550nm (1000Base) signals to existing 1310nm SONET rings using Wavelength Division Multiplexing (WDM) Introduction: Fiberdyne presents a system of Add/Drop/Regenerator (ADR), rack-mountable modules, which include passive and active components. The passive modules, multiplex and demultiplex 1310nm and 1550 band signals to/from a fiber link. The 1550 nm band can include a variety of signals: Sonet or Ethernet, CWDM or DWDM. The active modules can regenerate Gigabit Ethernet signals. Existing 1310nm Ring Conceptual Usage: Add ADR Modules to existing, dual-fiber links, which have a single wavelength on each fiber. Adding the 1310/1550 ADR system, effectively doubles the bandwidth on your existing fiber. Add optional CWDM or DWDM wavelengths and the bandwidth is further multiplied. Adding 1550nm 34 p indd 34 12/12/07 10:52:48 AM

35 Sonet Add/Drop Regenerator Multiplexer System Features: Wavelength Division Multiplexing of Fiber-optic signals for greater bandwidth Wavelength Add/Drop for deployment flexibility Signal regeneration for long-haul networks Standard Configurations: Two modular configurations for nodes: - All-in-One modules for easy provisioning - Individual Passive and Active modules for deployment flexibility. Head-end multiplexer/demultiplexer for multi-service deployment Standard (i.e. telecom) singlemode fiber Options: Single fiber or Dual fiber applications (e.g. point-to-point or ring topologies) Rack-mount module, 1U high, for 19/23-inch rack (i.e. reversible brackets) Chassis-mount modules, which fit standard rack-mount termination boxes and rack-mount panels(e.g. FCH or LGX compatible) Fiber-optic connections: FC, LC, SC, ST Multiple wavelengths: 1310, 1550, CWDM, DWDM FCH is a registered trademark of Corning Incorporated CCH is a registered trademark of Corning Incorporated Technical Data Sheet Available Online! Fiberdyne Part Number FADRS FADRS FCH -2P-RP FCH -12P-TB F9C21A2GCLL03M Product Description Dual Fiber Solution - Add/Drop FCH module, LC connectors 2-wavelength, 1310/1550nm Dual Fiber Solution - Regenerator, FCH module LC connectors 1550nm FCH - Rackmount Panel (Holds 2 Modules) FCH - Rackmount 5U Termination Box (Holds 12 Modules) Fiberdyne Labs SM Duplex LC-LC Patchcord 3 Meters 35 p indd 35 12/12/07 10:33:35 AM

36 CATV Narrowcast Modules Fiberdyne Labs, Inc. narrowcast optical modules have been designed to provide flexibility of form factor with superior passive optical components. The new family of narrowcast optical modules allows a 1550 nm broadcast signal to be overlaid with a 1310 nm narrowcast signal. The narrowcast module can be used in a variety of applications, including video on demand, telephony, and cable modems. Features Wide Temperature Range of Operations -40 C to +85 C Compact Design Standard or high Isolation WDM(Minimize Crosstalk) 17 db or 34 db isolation Available in 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 1x9, 1x10, 1x11, 1x12, 1x13, 1x14, 1x15, 1x16, 1x17, and 1x18 splits Best Price/Performance in the Industry Made in the U.S.A. Specifications Specifications 1x2 1x4 1x6 1x8 1x12 1x16 Insertion Loss 1310nm Input Typical.4 db.4 db.4 db.4 db.4 db.4 db Standard Isolation Insertion Loss 1310nm Input Typical.8 db.8 db.8 db.8 db.8 db.8 db High Isolation Insertion Loss 1310 Input Typical 3.8 db 7.4 db 9.2 db 10.4 db 12.6 db 13.9 db Standard Isolation Insertion Loss 1550nm Input Typical 4.2 db 7.8 db 9.6 db 10.8 db 3.0 db 14.3dB 36 p indd 36 12/12/07 10:33:54 AM

37 CATV Narrowcast Modules Narrowcast Module High Isolation, Rack Mount, SC/APC Input Connector & SC/UPC Output Connector Part Number FNM102HRMAAU FNM104HRMAAU FNM106HRMAAU FNM108HRMAAU FNM112HRMAAU Description Narrowcast Module, 1x2 configuration, high isolation, Rack Mount Narrowcast Module, 1x4 configuration, high isolation, Rack Mount Narrowcast Module, 1x6 configuration, high isolation, Rack Mount Narrowcast Module, 1x8 configuration, high isolation, Rack Mount Narrowcast Module, 1x12 configuration, high isolation, Rack Mount Narrowcast Module High Isolation, Rack Mount, SC/APC Connectors Part Number FNM102HRMAAA FNM104HRMAAA FNM106HRMAAA FNM108HRMAAA FNM112HRMAAA Description Narrowcast Module, 1x2 configuration, high isolation, Rack Mount Narrowcast Module, 1x4 configuration, high isolation, Rack Mount Narrowcast Module, 1x6 configuration, high isolation, Rack Mount Narrowcast Module, 1x8 configuration, high isolation, Rack Mount Narrowcast Module, 1x12 configuration, high isolation, Rack Mount Narrowcast Module High Isolation, Rack Mount, SC/APC Connectors Part Number FNM102SRMAAU FNM104SRMAAU FNM106SRMAAU FNM108SRMAAU FNM112SRMAAU Description Narrowcast Module, 1x2 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x4 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x6 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x8 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x12 configuration, Standard isolation, Rack Mount Narrowcast Module High Isolation, Rack Mount, SC/APC Input Connector & SC/UPC Output Connector Part Number FNM102SRMAAA FNM104SRMAAA FNM106SRMAAA FNM108SRMAAA FNM112SRMAAA FNM116SRMAAA Description Narrowcast Module, 1x2 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x4 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x6 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x8 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x12 configuration, Standard isolation, Rack Mount Narrowcast Module, 1x16 configuration, Standard isolation, Rack Mount 37 p indd 37 12/12/07 10:34:08 AM

38 Network Analyzer Fiber Optic Interface Module Purpose: To provide a simple parallel tap interface between your fiber optic network and your network analyzer or Monitoring equipment. Duplex Channel Module Network Analyzer Taps Fiber Optic Interface Modules Conceptual Usage: After connecting the Network Tap to the network, one can easily attach or remove the analyzer/monitor equipment without disturbing the network. This product is ideal for use with analyzers such as sniffers. Enjoy the cost benefits of sharing one network analyzer on multiple network links. This product is a passive optical device and does not require electrical power. It can be used on a variety of optical networks including ATM, Gigabit and Fast Ethernet. Network Taps are added to existing network links. These modules are described by their channel count. One channel monitors one, full-duplex link. Depending on the module type, multiple channels may be built into a single module. Each channel uses two fiber optic splitters and six optical connectors. These six connectors include two (2) network inputs, two (2) network outputs, and two (2) tap outlets. The customer must specify the desired tap split ratio, which can be almost any required percentage of the network power. Commonly specified values are 90/10, 80/20 and 50/50. Features: Attach/Remove Network Monitoring Equipment without Network Disruption Monitors Transmit and Receive Fibers Available for Singlemode or Multimode Networks Passive Optical Device - No Electrical Power Required Multiple Packaging Configurations Available Available with Most Popular Fiber-Optic Connectors Specific Virtually Any Tap (Split Ratio)Percentage (specify percent, of power, sampled from the network link - 1% to 50%) Standard Configurations: Split Ratios (typical): 50/50, 60/40, 70/30, 80/20, or 90/10 Standard telecom wavelengths (nm): 850, 1310, or 1550 Full-duplex monitoring Options: Singlemode (9/125) or Multimode (62.5/125 or 50/125) versions Gigabit Multimode/for VCSEL (e.g. 1000Base-SX sources) Alternate Spit Ratios available Simplex monitoring (i.e. 1/2 channel) Connector Types: SC, ST, FC, LC, MT-RJ Packaging: LGX, Corning, ADC, 19/23-inch Rackmount Note: Trademarks are property of their respective owners. F A N - X X X - X X X FAN = Fiberdyne Labs, Inc. Network Taps (Network Analyzer Taps Fiber Optic Interface Modules) 4th. Digit 5th. Digit Center Wavelength Number of Channels 0 = 1550 nm Single-mode Single-window 1 = 1310 nm Single-mode Single-window 2 = 1310/1550 Single-mode Dual-window 3 = 850 Multimode, Laser (e.g. gigabit) 4 = Reserved 5 = 850/1310 Multimode, Dual-window 0 = 1/2 Channel (3 Simplex Connectors) 1 = 1 Channel (3 Duplex Connectors) 2 = 2 Channels (6 Duplex Connectors) 3 = 3 Channels (9 Duplex Connectors) 4 = 4 Channels (12 Duplex Connectors) 5 = 5 Channels (15 Duplex Connectors) 6 = 6 Channels (18 Duplex Connectors Part number matrix continued on next page. Corning is a registered trademark of Corning Incorporated ADC is a registered trademark of ADC Telecommunications 38 p indd 38 12/12/07 10:34:26 AM

39 Network Analyzer Fiber Optic Interface Module (continued) Interface Module 6th. Digit Package Type 0 = Reduced Tray (Monitors 1 Duplex; pigtails only) 1 = 19 Rack Mount x 1.75 (1U high) (Monitors up to 6 Duplex Channels) 2 = Not Used ( Reserved for Future Configuration) 3 = Lucent /Fiberdyne Compatible Enclosure (Monitors 1 Duplex) 4 = Corning Compatible Enclosure (Monitors 1 or 2 Duplex Channels) 5 = Heavy Duty Simplex Enclosure (Monitors 1/2 Channel, i.e. Simplex link) 7th. Digit Fiber Type 0 = 50/125 Multimode (Using OM3 fiber) 1 = 62.5/125 Multimode 2 = 8.3/125 Singlemode 8th. Digit Connector Type 0 = Network Connections ST, Analyzer Connection ST. 1 = Network Connections FC, Analyzer Connection ST. 2 = Network Connections Duplex SC, Analyzer Connection Duplex SC. 3 = Network Connections ST, Analyzer Connection Duplex SC. 4 = Network Connections FC, Analyzer Connection Duplex SC. 5 = Network Connections ST Pigtail, Analyzer Connection ST Pigtail. 6 = Network Connections FC Pigtail, Analyzer Connection FC Pigtail. 7 = Network Connections SC Pigtails, Analyzer Connections SC Pigtails. 8 = Network Connections SC/APC Pigtails, Analyzer Connections SC Pigtails. 9 = Network Connections FC, Analyzer Connections FC. L = Network Connections Duplex LC Analyzer Connections Duplex LC. 9th. Digit Split Ratio Max. Insertion Loss 0 = 50/50 4.4/4.4 Multimode 4.0/4.0 Singlemode 1 = 70/30 3.0/6.9 Multimode 2.3/6.2 Singlemode 2 = 80/20 2.4/8.8 Multimode 1.7/8.0 Singlemode 3 = 90/10 1.9/11.9 Multimode 1.2/11.4 Singlemode 4 = 60/40 3.6/5.6 Multimode 2.9/5.0 Singlemode Example: FAN Network Analyzer Interface Module, Multimode, 850/1310 nm, 1 Duplex channel, 19 inch Rack- Mount, 62.5/125 MMF, SC connectors 90/10 optical split ratio. Note: Trademarks are property of their respective owners. Corning is a registered trademark of Corning Incorporated Lucent is a registered trademark of Lucent Technologies 39 p indd 39 12/12/07 10:34:43 AM

40 Precision Build - Out Style Attenuators 1.75" long +/-.3 db SC/APC Buildout Style Attenuator 1.75" long +/-.3 db SC/APC Duplex Buildout Style Attenuator Singlemode SC/APC Buildout Style Attenuators Part Number Description (1-20dB) FB Fiberdyne Labs SC/APC Buildout Style Attenuator 1dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 2dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 3dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 4dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 5dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 6dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 7dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 8dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 9dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 10dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 15dB FB Fiberdyne Labs SC/APC Buildout Style Attenuator 20dB Singlemode SC/APC Buildout Style Attenuators (Duplex) Part Number Description (1-20dB) FBD10101 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 1dB FBD10202 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 2dB FBD10303 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 3dB FBD10404 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 4dB FBD10505 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 5dB FBD10606 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 6dB FBD10707 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 7dB FBD10808 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 8dB FBD10909 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 9dB FBD11010 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 10dB FBD11515 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 15dB FBD12020 Fiberdyne Labs SC/APC Duplex Buildout Style Attenuator 20dB 40 p indd 40 12/12/07 10:35:10 AM

41 Precision Build - Out Style Attenuators Call for Multimode Price and Availability 1.75" long +/-.3dB SC/UPC Buildout Style Attenuator 1.75" long +/-.3dB SC/UPC Duplex Buildout Style Attenuator Singlemode SC/UPC Buildout Style Attenuators Part Number Description (1-20dB) FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 1dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 2dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 3dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 4dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 5dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 6dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 7dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 8dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 9dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 10dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 15dB FB Fiberdyne Labs SC/UPC Buildout Style Attenuator 20dB Singlemode SC/UPC Buildout Style Attenuators Duplex Part Number Description (1-20dB) FBD00101 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 1dB FBD00202 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 2dB FBD00303 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 3dB FBD00404 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 4dB FBD00505 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 5dB FBD00606 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 6dB FBD00707 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 7dB FBD00808 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 8dB FBD00909 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 9dB FBD01010 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 10dB FBD01515 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 15dB FBD02020 Fiberdyne Labs SC/UPC Duplex Buildout Style Attenuator 20dB 41 p indd 41 12/12/07 10:35:30 AM

42 Reduced Length RL Build-out Attenuator SC/UPC & SC/APC Part Number Description Attenuator FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 1dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 2dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 3dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 4dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 5dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 6dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 7dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 8dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 9dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 10dB 1.5" long +/- 1dB SC/UPC Reduced Length Buildout Style Attenuator (Available from 1-20dB) FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 15dB FBR Fiberdyne RL SC/UPC Buildout Style Attenuator 20dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 1dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 2dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 3dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 4dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 5dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 6dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 7dB 1.5" long +/- 1dB SC/APC Reduced Length Buildout Style Attenuator (Available from 1-20dB) FBR Fiberdyne RL SC/APC Buildout Style Attenuator 8dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 9dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 10dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 15dB FBR Fiberdyne RL SC/APC Buildout Style Attenuator 20dB NEW! MU Build-Out Style Available Online! Part # FUR011101dB 42 p indd 42 12/12/07 10:35:54 AM

43 Build-Out Style Attenuators LC/UPC & ST/UPC NEW! LC/APC Build-Out Style Available Online! Part # FN011101dB LC/UPC Buildout Style Attenuators Part Number Description Attenuator FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 1dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 2dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 3dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 4dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 5dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 6dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 7dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 8dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 9dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 10dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 15dB FL Fiberdyne Labs LC/UPC Buildout Style Attenuator 20dB 1.5" long +/- 1dB LC/UPC BUILD OUT STYLE ATTENUATOR ORDERING INFORMATION (Available from 1-20dB) Precision Singlemode ST/UPC Buildout Style Attenuators Call for Multimode Price and Availability Part Number Description Attenuator FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 1dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 2dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 3dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 4dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 5dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 6dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 7dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 8dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 9dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 10dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 15dB FC Fiberdyne Labs ST/UPC Buildout Style Attenuator 20dB 1.75" long +/-.3dB ST/UPC BUILD OUT STYLE ATTENUATOR ORDERING INFORMATION (Available from 1-20dB) 43 p indd 43 12/12/07 10:36:57 AM

44 Reduced Length RL Build-Out Attenuator FC/UPC & FC/APC Part Number Description Attenuator FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 1dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 2dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 3dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 4dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 5dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 6dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 7dB 1.5" long +/- 1dB FC/UPC Reduced Length Buildout Style Attenuator (Available from 1-20dB) FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 8dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 9dB FAR01110 Fiberdyne RL FC/UPC Buildout Style Attenuator 10dB FAR01115 Fiberdyne RL FC/UPC Buildout Style Attenuator 15dB FAR Fiberdyne RL FC/UPC Buildout Style Attenuator 20dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 1dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 2dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 3dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 4dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 5dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 6dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 7dB 1.75" long +/- 1πdB FC/APC Reduced Length Buildout Style Attenuator (Available from 1-20dB) FAR Fiberdyne RL FC/APC Buildout Style Attenuator 8dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 9dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 10dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 15dB FAR Fiberdyne RL FC/APC Buildout Style Attenuator 20dB 44 p indd 44 12/12/07 10:37:13 AM

45 Hybrid Build-Out Style Attenuators Call for Multimode Price and Availability Male SC to Female FC, ST, SC/APC, & FC/APC Specify Part# Description Attenuation FL-SCMFCF-SM-01dB SC Male to FC Female 1-20 db FL-SCMSTF-SM-01dB SC Male to ST Female 1-20 db FL-SCMSAF-SM-01dB SC Male to SC/APC Female call FL-SCMFAF-SM-01dB SC Male to FC/APC Female call Male SC/APC to Female FC, ST, SC, & FC/APC Specify Part# Description Attenuation FL-SAMFCF-SM-01dB SC/APC Male to FC Female 1-20 db FL-SAMSTF-SM-01dB SC/APC Male to ST Female 1-20 db FL-SAMSCF-SM-01dB SC/APC Male to SC Female 1-20 db FL-SAMFAF-SM-01dB SC/APC Male to FC/APC Female 1-20 db Male FC to Female FC/APC, ST, SC, & SC/APC Specify Part# Description Attenuation FL-FCMFAF-SM-01dB FC Male to FC/APC Female 1-20 db FL-FCMSTF-SM-01dB FC Male to ST Female 1-20 db FL-FCMSCF-SM-01dB FC Male to SC Female 1-20 db FL-FCMSAF-SM-01dB FC Male to SC/APC Female call Male ST to Female FC, SC, SC/APC, & FC/APC Specify Part# Description Attenuation FL-STMFCF-SM-01dB ST Male to FC Female 1-20 db FL-SCMFCF-SM-01dB ST Male to SC Female 1-20 db FL-SAMFCF-SM-01dB ST Male to SC/APC Female call FL-FAMFCF-SM-01dB ST Male to FC/APC Female call Male FC/APC to Female FC, ST, SC, & SC/APC Specify Part# Description Attenuation FL-FAMFCF-SM-01dB FC/APC Male to FC Female 1-20 db FL-FAMSTF-SM-01dB FC/APC Male to ST Female 1-20 db FL-FAMSCF-SM-01dB FC/APC Male to SC Female 1-20 db FL-FAMSAF-SM-01dB FC/APC Male to SC/APC Female 1-20 db 45 p indd 45 12/12/07 10:37:33 AM

46 Fixed In-Line Attenuators Note: Inline Attenuators are available from 1dB-20dB. Fixed 3dB In-Line Attenuators (Available from 1-20dB) Multimode Inline Attenuators are also available. Part Number Description Connector FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter None FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter ST/UPC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/UPC FLAHS110030A01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/APC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/UPC FLAHS110030B01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/APC FLAHS110030L01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter LC/UPC Fixed 5dB In-Line Attenuators (Available from 1-20dB) Multimode Inline Attenuators are also available. Part Number Description Connector FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter None FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter ST/UPC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/UPC FLAHS110050A01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/APC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/UPC FLAHS110050B01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/APC FLAHS110050L01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter LC/UPC Fixed 10dB In-Line Attenuators (Available from 1-20dB) Multimode Inline Attenuators are also available. Part Number Description Connector FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter None FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter ST/UPC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/UPC FLAHS110100A01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/APC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/UPC FLAHS110100B01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/APC FLAHS110100L01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter LC/UPC Fixed 15dB In-Line Attenuators (Available from 1-20dB) Multimode Inline Attenuators are also available. Part Number Description Connector FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter None FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter ST/UPC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/UPC FLAHS110150A01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter FC/APC FLAHS M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/UPC FLAHS110150B01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter SC/APC FLAHS110150L01M Fiberdyne Labs SM Fixed In-Line Attenuator, 1 Meter LC/UPC 46 p indd 46 12/12/07 10:37:48 AM

47 Singlemode Variable In-Line Attenuators Call for Multimode Price and Availability Back reflection: 40dB for pigtail style sm attenuators Attenuation range: 2-80dB with 0.01dB resolution up to 10dB 0.1dB resolution up to 30dB attenuation Wavelength dependability: 0.3dB change in insertion loss for 1 Available wavelengths: nm Temperature range: -35 C to +70 C with less than +/-0.3dB attenuation Humidity range: +/-0.2dB change in 10% to 90% humidity range Drop test: +/-0.2dB change after 4 drops from a height of 1 meter Vibration: less than 0.05dB change between 10hz-55hz Polarization sensitivity: less than 0.05 db change over all input Part Number Description Connector FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter None FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter ST/UPC FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter FC/UPC FVOMS110800A01M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter FC/APC FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter SC/UPC FVOMS110800B01M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter SC/APC FVOMS110800L01M Fiberdyne Labs In-Line Attenuator, 2-80dB, 1 Meter LC/UPC Part Number Description Connector FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter None FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter ST/UPC FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter FC/UPC FVOMS110800A02M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter FC/APC FVOMS M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter SC/UPC FVOMS110800B02M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter SC/APC FVOMS110800L02M Fiberdyne Labs In-Line Attenuator, 2-80dB, 2 Meter LC/UPC Fiberdyne Labs offers a multimode In-Line Variable Optical Attenuator. Ask your Fiberdyne Labs, Inc. sales representative for a quote. Custom Lengths: The Fiberdyne Labs, Inc VOA is available with 1 meter or 2 meter total length of cable. Due to the manufacturing process it is difficult to make the In-Line VOA longer, however, Fiberdyne Labs, Inc. can splice on additional cable to facilitate custom requirements. 47 p indd 47 12/12/07 10:38:09 AM

48 Singlemode Loopback Attenuators Call for Multimode Price and Availability Part Number Description Attenuator Singlemode SC/UPC Loopback Attenuator 0dB Singlemode SC/UPC Loopback Attenuator 1dB Singlemode SC/UPC Loopback Attenuator 2dB Singlemode SC/UPC Loopback Attenuator 3dB Singlemode SC/UPC Loopback Attenuator 4dB Singlemode SC/UPC Loopback Attenuator 5dB Singlemode SC/UPC Loopback Attenuator 6dB Singlemode SC/UPC Loopback Attenuator 7dB Singlemode SC/UPC Loopback Attenuator 8dB Singlemode SC/UPC Loopback Attenuator 9dB Singlemode SC/UPC Loopback Attenuator 10dB Singlemode SC/UPC Loopback Attenuator 15dB Singlemode SC/UPC Loopback Attenuator 20dB SC/UPC LOOPBACK ATTENUATOR (AVAILABLE FROM 1-20 db) (Multimode versions available.) Part Number Description Attenuator Singlemode LC/UPC Loopback Attenuator 0dB Singlemode LC/UPC Loopback Attenuator 1dB Singlemode LC/UPC Loopback Attenuator 2dB Singlemode LC/UPC Loopback Attenuator 3dB Singlemode LC/UPC Loopback Attenuator 4dB Singlemode LC/UPC Loopback Attenuator 5dB Singlemode LC/UPC Loopback Attenuator 6dB Singlemode LC/UPC Loopback Attenuator 7dB Singlemode LC/UPC Loopback Attenuator 8dB Singlemode LC/UPC Loopback Attenuator 9dB Singlemode LC/UPC Loopback Attenuator 10dB Singlemode LC/UPC Loopback Attenuator 15dB Singlemode LC/UPC Loopback Attenuator 20dB LC/UPC LOOPBACK ATTENUATOR (AVAILABLE FROM 1-20 db) (Multimode versions available.) Part Number Description Attenuator Singlemode MT-RJ Loopback Attenuator 0dB Singlemode MT-RJ Loopback Attenuator 1dB Singlemode MT-RJ Loopback Attenuator 2dB Singlemode MT-RJ Loopback Attenuator 3dB Singlemode MT-RJ Loopback Attenuator 4dB Singlemode MT-RJ Loopback Attenuator 5dB Singlemode MT-RJ Loopback Attenuator 6dB Singlemode MT-RJ Loopback Attenuator 7dB Singlemode MT-RJ Loopback Attenuator 8dB Singlemode MT-RJ Loopback Attenuator 9dB Singlemode MT-RJ Loopback Attenuator 10dB Singlemode MT-RJ Loopback Attenuator 15dB Singlemode MT-RJ Loopback Attenuator 20dB MT/RJ LOOPBACK ATTENUATOR (AVAILABLE FROM 1-20 db) (Multimode versions available.) 48 p indd 48 12/12/07 10:38:29 AM

49 Block In-Line Attenuators and Terminators Singlemode SC Block In-Line Attenuators (Available from 1-20dB) Part Number Description Attenuator Fiberdyne Labs SC SM, Block In-Line Attenuator 1dB Fiberdyne Labs SC SM, Block In-Line Attenuator 2dB Fiberdyne Labs SC SM, Block In-Line Attenuator 3dB Fiberdyne Labs SC SM, Block In-Line Attenuator 4dB Fiberdyne Labs SC SM, Block In-Line Attenuator 5dB Fiberdyne Labs SC SM, Block In-Line Attenuator 6dB Fiberdyne Labs SC SM, Block In-Line Attenuator 7dB Fiberdyne Labs SC SM, Block In-Line Attenuator 8dB Fiberdyne Labs SC SM, Block In-Line Attenuator 9dB Fiberdyne Labs SC SM, Block In-Line Attenuator 10dB Fiberdyne Labs SC SM, Block In-Line Attenuator 15dB Fiberdyne Labs SC SM, Block In-Line Attenuator 20dB Multimode SC Block In-Line Attenuators (Available from 1-20dB) Part Number Description Attenuator Fiberdyne Labs SC MM, Block In-Line Attenuator 1dB Fiberdyne Labs SC MM, Block In-Line Attenuator 2dB Fiberdyne Labs SC MM, Block In-Line Attenuator 3dB Fiberdyne Labs SC MM, Block In-Line Attenuator 4dB Fiberdyne Labs SC MM, Block In-Line Attenuator 5dB Fiberdyne Labs SC MM, Block In-Line Attenuator 6dB Fiberdyne Labs SC MM, Block In-Line Attenuator 7dB Fiberdyne Labs SC MM, Block In-Line Attenuator 8dB Fiberdyne Labs SC MM, Block In-Line Attenuator 9dB Fiberdyne Labs SC MM, Block In-Line Attenuator 10dB Fiberdyne Labs SC MM, Block In-Line Attenuator 15dB Fiberdyne Labs SC MM, Block In-Line Attenuator 20dB Singlemode Terminators Part number Description FTSCAPC SC/APC "Build Out" Style Terminator FTSCUPC SC/UPC "Build Out" Style Terminator FTFCAPC FC/APC "Build Out" Style Terminator FTFCUPC FC/UPC "Build Out" Style Terminator FTSTUPC ST/UPC Block Style Terminator FBSCAPC SC/APC Block Style Terminator FBSCUPC SC/UPC Block Style Terminator Prevent Undesirable Back Reflection with Fiberdyne Labs,Inc. Terminators 49 p indd 49 12/12/07 10:38:49 AM

50 Fiber Optic CATV-Entrance Cable The Fiberdyne entrance cable is available with a nickel - tin plated solid brass housing with 5/8 watertight rotational nut for easy installation. ARMORED-900UM (most entrance cables are 900um buffered) Part number Description FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX Entrance Cable, Armored, 900um, FC/APC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 900um, FC/APC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 900um, FC/APC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 900um, SC/APC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 900um, SC/APC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 900um, SC/APC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 900um, FC/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 900um, FC/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 900um, FC/UPC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 900um, SC/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 900um, SC/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 900um, SC/UPC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 900um, ST/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 900um, ST/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 900um, ST/UPC, 6 Fiber with 6 connectorized ARMORED-3MM Part number FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX FE XXX Description Entrance Cable, Armored, 3MM, FC/APC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 3MM, FC/APC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 3MM, FC/APC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 3MM, SC/APC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 3MM, SC/APC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 3MM, SC/APC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 3MM, FC/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 3MM, FC/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 3MM, FC/UPC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 3MM, SC/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 3MM, SC/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 3MM, SC/UPC, 6 Fiber with 6 connectorized Entrance Cable, Armored, 3MM, ST/UPC, 6 Fiber with 2 connectorized Entrance Cable, Armored, 3MM, ST/UPC, 6 Fiber with 4 connectorized Entrance Cable, Armored, 3MM, ST/UPC, 6 Fiber with 6 connectorized 50 p indd 50 12/12/07 10:39:29 AM

51 Fiber Optic CATV Entrance Cable UNARMORED-900UM (MOST ENTRANCE CABLES ARE 900um BUFFERED) Part number Description FE XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 6 connectorized UNARMORED-3MM Part number Description FE XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 6 connectorized FE XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 2 connectorized FE XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 4 connectorized FE XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 6 connectorized 6, 8, & 12 Fiber Entrance Cables Available. See part number matrix on this page or contact your Fiberdyne Labs, Inc. Representative for a quote! FIBER OPTIC ENTRANCE CABLE ORDERING INFORMATION F E X - X X X X - X X X FE= FIBER OPTIC ENTRANCE CABLE 3rd. Digit Cable Type 0 = Armored 1 = Dielectric (Non-armored) 4th. Digit Fiber Type 0 = 900 micron 1 = 3 mm 2 = 2 mm (Note: 3mm not available with center tube, armored cable.) 5th. Digit Feed Through Housing Option 0 = With rotational nut. 6th. Digit Connector Type 0 = FC/APC 1 = SC/APC 2 = FC/UPC 3 = SC/UPC 4 = ST/UPC 7th. Digit Fiber Count 0 = 4 Fibers with 2 Connectorized 1 = 4 Fibers with 4 Connectorized 2 = 6 Fibers with 2 Connectorized 3 = 6 Fibers with 4 Connectorized 4 = 6 Fibers with 6 Connectorized 5 = 12 Fibers with 2 Connectorized 6 = 12 Fibers with 4 Connectorized 7 = 12 Fibers with 6 Connectorized 8 = 12 Fibers with 12 Connectorized 9 = 12 Fibers with 8 Connectorized A = 12 Fibers with 10 Connectorized 8th, 9th, & 10th. Digits Digits Cable Length Examples: = 50 feet = 75 feet 127 Business 1 2 Park 5 = 125 Drive., feet Frankfort, NY Toll Free: = 150 feet Fax: [email protected] 51 p indd 51 12/12/07 10:39:43 AM

52 Fiberdyne Labs, Inc. Cable Assemblies Part Number Matrix and Connector Specification PART NUMBER INFORMATION: F * a b c d e e f g h I j j j k a. Cable Manufacturer 1. Corning 5. OCC 9. Fiberdyne Labs S. Systimax 2. OFS 8. AFL C. CommScope b. Assembly Type C. Patchcord(Jumper) G. Pigtail (connector on one end) c. Fiber Count 1. Simplex 5. 4 Fiber Fiber E. 96 Fiber J. 10 Fiber 2. Duplex (2 fiber zipcord) 6. 6 Fiber B. 36 Fiber F. 144 Fiber K. 30 Fiber 3. MIC (2 fiber round) 7. 8 Fiber C. 48 Fiber G. 18 Fiber L. 216 Fiber Fiber D. 72 Fiber H. 108 Fiber d. Cable Rating 1. Riser 6. Ribbon Riser A. Military B. 900um 2. Plenum 7. Fanout Riser F. Fanout Plenum 3. Indoor/Outdoor Rise 8. Figure 8 R. Ribbon Plenum 4. Outdoor Non-Armored 9. Indoor/Outdoor Plenum P. Armored Indoor Plenum 5. Outdoor Armored S.SST-Drop M. Armored Indoor Riser N. FRNC T. SST-Drop with Tacer Z. LSZH e. Fiber Type A1. Singlemode (8.3/125) 3mm Jacket B1. Multimode (62.5/125) 900um Jacket A2. Singlemode (8.3/125) 2.0mm Jacket B2. Multimode (62.5/125) 3mm Jacket A3. Singlemode (8.3/125) 1.6mm Mini-cord B3. Multimode (62.5/125) 1.6mm Mini-cord A4. Singlemode (8.3/ um Jacket B4. Multimode (62.5/125) 2.0mm Jacket C1. Multimode (50/125) 3mm Jacket K1. Mode Conditioning Cable 62.5/125 C2. Multimode (50/125) 2.0mm Jacket K2. Mode Conditioning Cable 50/125 C3. Multimode (50/125) 1.6mm Mini-cord K3. Mode Conditioning Cable 50/125 10GIG OM3 T1. MM (50/125 10GIG 550 ) 3mm Jacket Q1. MM (50/125 10GIG OM3 ) 3mm Jacket T2. MM (50/125 10GIG 550) 2.0mm Jacket Q2. MM (50/125 10GIG OM3) 2.0mm Jacket T3. MM (50/125 10GIG 550) 1.6mm Mini-cord Q3. MM (50/125 10GIG OM3) 1.6mm Mini-cord R1. SM Bend Insensitive 3.0mm Jacket Q4. MM (50/125 10GIG OM3) 900UM Jacket R2. SM Bend Insensitive 2.0mm Jacket R3. SM Bend Insensitive 1.6mm Jacket f. Connector Manufacturer A. OFS M. Systimax G. Fiberdyne P. Amp K. Senko (RoHs) S. Corning g. Ferrule Material C. Ceramic P. Polymer G. Mixed S. Stainless h. Connector #1 Type 1. ST 7. FC C. LC (clipped) J. Opti-Jack Jack P. MTP (no pins) U. MU 2. FDDI, MIC, FSD 8. ESCON D. E2000 /APC K.Opti-Jack Plug Q. MTP (w/pins) W. SC/APC (yoked) 3. SMA* 9. D4 E. E2000 /UPC L. LC Simplex R. MTRJ (w/pin) Y. SC (yoked) 4. Mini-Bnc A. FC/APC F. LC/APC (clipped) M. MTRJ (no pins) T. MTP /APC (no pins) 6. SC Simplex B. SC/APC H. MTP /APC (w/pins) N. LC/APC Simplex I. Connector #2 Type Same choices as above 0. Pigtail JJJ. Length xxxf. Feet xxxm. Meter xxxi. Inches xxxk. Kilometers 52 k. Color (all colors not available for every cable type) B. Blue R. Red G. Green PK. Pink Y. Yellow S. Slate K. Black E. Beige Q. Aqua O. Orange W. White P. Purple BR. Brown *ADDITIONAL INFORMATION 900 : 900UM BREAKOUT PE : PULLING EYE ONE END (if required) 3MM : 3MM BREAKOUT 2PE : PULLING EYES ON BOTH ENDS 2MM : 2MM BREAKOUT TR: TEST RESULTS MIC is a registered trademark of Corning Incorporated RL: On Reel 905 or 906 (For SMA only) All trademarks are property of their respective owners X: Toll CUSTOM Free: CONFIGURATION Fax: [email protected] Corning is a registered trademark of Corning Incorporated OFS is a registered trademark of Furukawa Electric North America Inc. AFL is a registered trademark of AFL Telecommunications Commscope is a registered trademark of Commscope, Inc. Systimax is a registered trademark of Commscope, Inc. SST-Drop is a registered trademark of Corning Incorporated Senko is a registered trademark of Senko Advanced Components, Inc. Amp is a registered trademark of Tyco Electronics Corporation E2000 is a registered trademark of Diamond SA Opti-Jack is a registered trademark of Panduit Corp. MTP is a registered trademake of US Conec, Ltd. p indd 52 12/12/07 10:40:01 AM

53 ST Fiberdyne Labs, Inc. Cable Assemblies Part Number Matrix and Connector Specification Multimode Connectors.25dB typical insertion loss Singlemode Connectors.25dB typical insertion loss -55dB typical return loss ST/UPC SC.25dB typical insertion loss.25db typical insertion loss -55dB typical return loss SC/UPC SC Yoked.25dB typical insertion loss -55dB typical return loss SC/UPC Yoked LC.25dB typical insertion loss.25db typical insertion loss -68dB typical return loss SC/APC (Yoked available) LC Clipped.25dB typical insertion loss.25db typical insertion loss -55dB typical return loss LC/UPC.25dB typical insertion loss.25db typical insertion loss -55dB typical return loss LC/UPC Clipped MT-RJ.5dB typical insertion loss.25db typical insertion loss -65dB typical return loss LC/APC (Clipped available) FC.5dB typical insertion loss -35dB typical return loss MT-RJ MTP MTP is a trademark of US Conec, Ltd..25dB typical insertion loss.5db typical insertion loss.25db typical insertion loss -55dB typical return loss.25db typical insertion loss -65dB typical return loss FC/UPC FC/APC RoHS Compliant available; Call for availability..5db typical insertion loss -55dB typical return loss MTP APC Opti-Jack is a registered trademark of Panduit Corp. E2000 is a registered trademark of Diamond SA MTP is a registered trademake of US Conec, Ltd. All trademarks are property of their respective owners.25db typical insertion loss -55dB typical return loss MU Toll Free: Also Fax: Available: [email protected] ESCON, FDDI, SMA905, SMA906, Opti-Jack Plug, Opti-Jack Jack, E2000, E2000 /APC, D4, and MORE! 53 p indd 53 12/12/07 10:40:19 AM

54 Fiberdyne Labs Singlemode Fiber Jumper Cables F Part Number F9C11A2GCN6XX(F or M) F9C11A2GCN1XX(F or M) F9C11A2GCN7XX(F or M) F9C11A2GCNBXX(F or M) F9C11A2GCNAXX(F or M) F9C11A2GCNLXX(F or M) F9C11A2GCNNXX(F or M) Part Number F9C21A2GCN6XX(F or M) F9C21A2GCN1XX(F or M) F9C21A2GCN7XX(F or M) F9C21A2GCNBXX(F or M) F9C21A2GCNAXX(F or M) F9C21A2GCNLXX(F or M) F9C21A2GCNNXX(F or M) Part Number F9C11A2GCU6XX(F or M) F9C11A2GCU1XX(F or M) F9C11A2GCU7XX(F or M) F9C11A2GCUBXX(F or M) F9C11A2GCUAXX(F or M) F9C11A2GCULXX(F or M) F9C11A2GCUNXX(F or M) F9C11A2GCUUXX(F or M) Part Number F9C21A2GCU6XX(F or M) F9C21A2GCU1XX(F or M) F9C21A2GCU7XX(F or M) F9C21A2GCUBXX(F or M) F9C21A2GCUAXX(F or M) F9C21A2GCULXX(F or M) F9C21A2GCUNXX(F or M) F9C21A2GCUUXX(F or M) Part Number F9C11A3GCL6XX(F or M) F9C11A3GCL1XX(F or M) F9C11A3GCL7XX(F or M) F9C11A3GCLBXX(F or M) F9C11A3GCLAXX(F or M) F9C11A3GCLLXX(F or M) Part Number F9C21A3GCL6XX(F or M) F9C21A3GCC6XX(F or M) F9C21A3GCL1XX(F or M) F9C21A3GCC1XX(F or M) F9C21A3GCL7XX(F or M) F9C21A3GCC7XX(F or M) F9C21A3GCLBXX(F or M) F9C21A3GCCBXX(F or M) F9C21A3GCLAXX(F or M) F9C21A3GCCAXX(F or M) F9C21A3GCLLXX(F or M) F9C21A3GCCCXX(F or M) Part Number F9C26A1GCM6XX(F or M) F9C26A1GCMYXX(F or M) F9C26A1GCM1XX(F or M) F9C26A1GCM7XX(F or M) F9C26A1GCMBXX(F or M) F9C26A1GCMAXX(F or M) F9C26A1GCMLXX(F or M) F9C26A1GCMCXX(F or M) F9C26A1GCMMXX(F or M) Description SM 2.0MM SIMPLEX, LC/APC-SC/UPC SM 2.0MM SIMPLEX, LC/APC-ST/UPC SM 2.0MM SIMPLEX, LC/APC-FC/UPC SM 2.0MM SIMPLEX, LC/APC-SC/APC SM 2.0MM SIMPLEX, LC/APC-FC/APC SM 2.0MM SIMPLEX, LC/APC-LC/UPC SM 2.0MM SIMPLEX, LC/APC-LC/APC Description SM 2.0MM DUPLEX, LC/APC-SC/UPC SM 2.0MM DUPLEX, LC/APC-ST/UPC SM 2.0MM DUPLEX, LC/APC-FC/UPC SM 2.0MM DUPLEX, LC/APC-SC/APC SM 2.0MM DUPLEX, LC/APC-FC/APC SM 2.0MM DUPLEX, LC/APC-LC/UPC SM 2.0MM DUPLEX, LC/APC-LC/APC, BASE Description SM 2.0MM SIMPLEX, MU/UPC-SC/UPC SM 2.0MM SIMPLEX, MU/UPC-ST/UPC SM 2.0MM SIMPLEX, MU/UPC-FC/UPC SM 2.0MM SIMPLEX, MU/UPC-SC/APC SM 2.0MM SIMPLEX, MU/UPC-FC/APC SM 2.0MM SIMPLEX, MU/UPC-LC/UPC SM 2.0MM SIMPLEX, MU/UPC-LC/APC SM 2.0MM SIMPLEX, MU/UPC-MU/UPC Description SM 2.0MM DUPLEX, MU/UPC-SC/UPC SM 2.0MM DUPLEX, MU/UPC-ST/UPC SM 2.0MM DUPLEX, MU/UPC-FC/UPC SM 2.0MM DUPLEX, MU/UPC-SC/APC SM 2.0MM DUPLEX, MU/UPC-FC/APC SM 2.0MM DUPLEX, MU/UPC-LC/UPC SM 2.0MM DUPLEX,MU/UPC-LC/APC SM 2.0MM DUPLEX, MU/UPC-MU/UPC Description SM 1.6MM SIMPLEX, LC/UPC-SC/UPC SM 1.6MM SIMPLEX, LC/UPC-ST/UPC SM 1.6MM SIMPLEX, LC/UPC-FC/UPC SM 1.6MM SIMPLEX, LC/UPC-SC/APC SM 1.6MM SIMPLEX, LC/UPC-FC/APC SM 1.6MM SIMPLEX, LC/UPC-LC/UPC Description SM 1.6MM DUPLEX, LC/UPC-SC/UPC SM 1.6MM DUPLEX, LC/UPC-SC/UPC, YOKED SM 1.6MM DUPLEX, LC/UPC-ST/UPC SM 1.6MM DUPLEX, LC/UPC-ST/UPC, YOKED SM 1.6MM DUPLEX, LC/UPC-FC/UPC SM 1.6MM DUPLEX, LC/UPC-FC/UPC, YOKED SM 1.6MM DUPLEX, LC/UPC-SC/APC SM 1.6MM DUPLEX, LC/UPC-SC/APC, YOKED SM 1.6MM DUPLEX, LC/UPC-FC/APC SM 1.6MM DUPLEX, LC/UPC-FC/APC, YOKED SM 1.6MM DUPLEX, LC/UPC-LC/UPC SM 1.6MM DUPLEX, LC/UPC-LC/UPC, YOKED Description SM 2 FIBER RIBBON, MTRJ-SC/UPC SM 2 FIBER RIBBON, MTRJ-SC/UPC, YOKED SM 2 FIBER RIBBON, MTRJ-ST/UPC SM 2 FIBER RIBBON, MTRJ-FC/UPC SM 2 FIBER RIBBON, MTRJ-SC/APC SM 2 FIBER RIBBON, MTRJ-FC/APC SM 2 FIBER RIBBON, MTRJ-LC/UPC SM 2 FIBER RIBBON, MTRJ-LC/UPC, YOKED SM 2 FIBER RIBBON, MTRJ-MTRJ 2mm Simplex 2mm Duplex Connector specifications, pictures, and part number build matrix are available on pages Cable specifications are available on pages and online. 1.6mm Simplex 1.6mm Duplex Ribbon Duplex 54 p indd 54 12/12/07 10:40:37 AM

55 Fiberdyne Labs Singlemode Fiber Jumper Cables Part Number F9C11A1GC66XX(F or M) F9C11A1GC61XX(F or M) F9C11A1GC67XX(F or M) F9C11A1GC6BXX(F or M) F9C11A1GC6AXX(F or M) F9C11A1GCBBXX(F or M) F9C11A1GCB1XX(F or M) F9C11A1GCB7XX(F or M) F9C11A1GCBAXX(F or M) F9C11A1GC77XX(F or M) F9C11A1GC71XX(F or M) F9C11A1GC7AXX(F or M) F9C11A1GCAAXX(F or M) F9C11A1GCA1XX(F or M) F9C11A1GC11XX(F or M) Part Number F9C21A1GC66XX(F or M) F9C21A1GCYYXX(F or M) F9C21A1GC61XX(F or M) F9C21A1GCY1XX(F or M) F9C21A1GC67XX(F or M) F9C21A1GCY7XX(F or M) F9C21A1GC6BXX(F or M) F9C21A1GCYBXX(F or M) F9C21A1GC6AXX(F or M) F9C21A1GCYAXX(F or M) F9C21A1GCBBXX(F or M) F9C21A1GCB1XX(F or M) F9C21A1GCB7XX(F or M) F9C21A1GCBAXX(F or M) F9C21A1GC77XX(F or M) F9C21A1GC71XX(F or M) F9C21A1GC7AXX(F or M) F9C21A1GCAAXX(F or M) F9C21A1GCA1XX(F or M) F9C21A1GC11XX(F or M) Part Number F9C11A2GCL6XX(F or M) F9C11A2GCL1XX(F or M) F9C11A2GCL7XX(F or M) F9C11A2GCLBXX(F or M) F9C11A2GCLAXX(F or M) F9C11A2GCLLXX(F or M) Part Number F9C21A2GCL6XX(F or M) F9C21A2GCCYXX(F or M) F9C21A2GCL1XX(F or M) F9C21A2GCC1XX(F or M) F9C21A2GCL7XX(F or M) F9C21A2GCC7XX(F or M) F9C21A2GCLBXX(F or M) F9C21A2GCCBXX(F or M) F9C21A2GCLAXX(F or M) F9C21A2GCCAXX(F or M) F9C21A2GCLLXX(F or M) F9C21A2GCCCXX(F or M) Description SM 3.0MM SIMPLEX, SC/UPC-SC/UPC SM 3.0MM SIMPLEX, SC/UPC-ST/UPC SM 3.0MM SIMPLEX, SC/UPC-FC/UPC SM 3.0MM SIMPLEX, SC/UPC-SC/APC SM 3.0MM SIMPLEX, SC/UPC-FC/APC SM 3.0MM SIMPLEX, SC/APC-SC/APC SM 3.0MM SIMPLEX, SC/APC-ST/UPC SM 3.0MM SIMPLEX, SC/APC-FC/UPC SM 3.0MM SIMPLEX, SC/APC-FC/APC SM 3.0MM SIMPLEX, FC/UPC-FC/UPC SM 3.0MM SIMPLEX, FC/UPC-ST/UPC SM 3.0MM SIMPLEX, FC/UPC-FC/APC SM 3.0MM SIMPLEX, FC/APC-FC/APC SM 3.0MM SIMPLEX, FC/APC-ST/UPC SM 3.0MM SIMPLEX, ST/UPC-ST/UPC Description SM 3.0MM DUPLEX, SC/UPC-SC/UPC SM 3.0MM DUPLEX, SC/UPC-SC/UPC, YOKED SM 3.0MM DUPLEX, SC/UPC-ST/UPC SM 3.0MM DUPLEX, SC/UPC-ST/UPC, YOKED SM 3.0MM DUPLEX, SC/UPC-FC/UPC SM 3.0MM DUPLEX, SC/UPC-FC/UPC, YOKED SM 3.0MM DUPLEX, SC/UPC-SC/APC SM 3.0MM DUPLEX, SC/UPC-SC/APC, YOKED SM 3.0MM DUPLEX, SC/UPC-FC/APC SM 3.0MM DUPLEX, SC/UPC-FC/APC, YOKED SM 3.0MM DUPLEX, SC/APC-SC/APC SM 3.0MM DUPLEX, SC/APC-ST/UPC SM 3.0MM DUPLEX, SC/APC-FC/UPC SM 3.0MM DUPLEX, SC/APC-FC/APC SM 3.0MM DUPLEX, FC/UPC-FC/UPC SM 3.0MM DUPLEX, FC/UPC-ST/UPC SM 3.0MM DUPLEX, FC/UPC-FC/APC SM 3.0MM DUPLEX, FC/APC-FC/APC SM 3.0MM DUPLEX, FC/APC-ST/UPC SM 3.0MM DUPLEX, ST/UPC-ST/UPC Description SM 2.0MM SIMPLEX, LC/UPC-SC/UPC SM 2.0MM SIMPLEX, LC/UPC-ST/UPC SM 2.0MM SIMPLEX, LC/UPC-FC/UPC SM 2.0MM SIMPLEX, LC/UPC-SC/APC SM 2.0MM SIMPLEX, LC/UPC-FC/APC SM 2.0MM SIMPLEX, LC/UPC-LC/UPC Description SM 2.0MM DUPLEX, LC/UPC-SC/UPC SM 2.0MM DUPLEX, LC/UPC-SC/UPC, YOKED, SM 2.0MM DUPLEX, LC/UPC-ST/UPC SM 2.0MM DUPLEX, LC/UPC-ST/UPC, YOKED SM 2.0MM DUPLEX, LC/UPC-FC/UPC SM 2.0MM DUPLEX, LC/UPC-FC/UPC, YOKED SM 2.0MM DUPLEX, LC/UPC-SC/APC SM 2.0MM DUPLEX, LC/UPC-SC/APC, YOKED SM 2.0MM DUPLEX, LC/UPC-FC/APC SM 2.0MM DUPLEX, LC/UPC-FC/APC, YOKED SM 2.0MM DUPLEX, LC/UPC-LC/UPC SM 2.0MM DUPLEX, LC/UPC-LC/UPC, YOKED 3mm Simplex 3mm Duplex Connector specifications, pictures, and part number build matrix are available on pages Cable specifications are available on pages and online. 2mm Simplex 2mm Duplex 55 p indd 55 12/12/07 10:40:51 AM

56 Tera Flow Jumpers for DWDM, SONET, SDH and CATV Systems Tera Flow Jumpers for DWDM, SONET, SDH and CATV Systems Introduction: DWDM, SONET, SDH and CATV systems are all using DWDM technology to increase the bandwidth of their networks. Telcordia Generic Requirements for Optical Fiber and Cable GR-20-CORE Issue 2 specify a limit of 0.5 db loss per 16-mm bend radius turn on any systems using the C and L bands. Turns which exceed the 0.5 db loss can severely deteriorate the signal amplitude non-linearly across the C and L band causing signal distortion in erbium amplifiers. Fiberdyne Tera Flow Jumpers are designed and tested to meet Telcordia specifications. 56 Simplex Riser 2.9mm Patchcords ST/UPC-ST/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC1101M F9C11R1GC1102M F9C11R1GC1103M F9C11R1GC1105M F9C11R1GC1110M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/UPC-SC/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC6601M F9C11R1GC6602M F9C11R1GC6603M F9C11R1GC6605M F9C11R1GC6610M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords FC/UPC-FC/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC7701M F9C11R1GC7702M F9C11R1GC7703M F9C11R1GC7705M F9C11R1GC7710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/UPC-ST/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC6101M F9C11R1GC6102M F9C11R1GC6103M F9C11R1GC6105M F9C11R1GC6110M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SCUPC-FC/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC6701M F9C11R1GC6702M F9C11R1GC6703M F9C11R1GC6705M F9C11R1GC6710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/UPC-SC/APC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC6B01M F9C11R1GC6B02M F9C11R1GC6B03M F9C11R1GC6B05M F9C11R1GC6710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/APC-SC/APC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCBB01M F9C11R1GCBB02M F9C11R1GCBB03M F9C11R1GCBB05M F9C11R1GCBB10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/APC-FC/APC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCB701M F9C11R1GCB702M F9C11R1GCB703M F9C11R1GCB705M F9C11R1GCB710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/APC-ST/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCB101M F9C11R1GCB102M F9C11R1GCB103M F9C11R1GCB105M F9C11R1GCB105M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords SC/APC-FC/APC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCBA01M F9C11R1GCBA02M F9C11R1GCBA03M F9C11R1GCBA05M F9C11R1GCBA05M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords FC/APC-FC/APC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCAA01M F9C11R1GCAA02M F9C11R1GCAA03M F9C11R1GCAA05M F9C11R1GCAA05M Call for Quote Call for 127 Quote Business Park Call Drive., for Quote Frankfort, NY Call for Quote Call for Quote p indd 56 12/12/07 10:41:12 AM

57 Specifications: Tera Flow Jumpers for DWDM, SONET, SDH and CATV Systems Simplex Riser 2.9mm Patchcords FC/APC-SC/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCA601M F9C11R1GCA602M F9C11R1GCA603M F9C11R1GCA605M F9C11R1GCA605M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords FC/APC-ST/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCA101M F9C11R1GCA102M F9C11R1GCA103M F9C11R1GCA105M F9C11R1GCA105M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.9mm Patchcords FC/APC-FC/UPC 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCA701M F9C11R1GCA702M F9C11R1GCA703M F9C11R1GCA705M F9C11R1GCA705M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.0mm Patchcords LC/UPC-LC/UPC Simplex 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLL01M F9C11R2GCLL02M F9C11R2GCLL03M F9C11R2GCLL05M F9C11R2GCLL10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.0mm Patchcords LC/UPC-SC/UPC Simplex 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCL601M F9C11R2GCL602M F9C11R2GCL603M F9C11R2GCL605M F9C11R2GCL610M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.0mm Patchcords LC/UPC-ST/UPC Simplex 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCL101M F9C11R2GCL102M F9C11R2GCL103M F9C11R2GCL105M F9C11R2GCL110M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.0mm Patchcords LC/UPC-SC/APC Simplex 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLB01M F9C11R2GCLB02M F9C11R2GCLB03M F9C11R2GCLB05M F9C11R2GCLB10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Simplex Riser 2.0mm Patchcords LC/UPC-FC/APC Simplex 1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLA01M F9C11R2GCLA02M F9C11R2GCLA03M F9C11R2GCLA05M F9C11R2GCLA10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Tera Flow - Bend Insensitive Assemblies Jacket Sizes Available in 900um, 2mm, or 2.9mm Basic Comfigurations Simplex and Duplex Storage Temperature -40 to +85 <98% R.H. Operating Temperature -20 to 85 5% to 95% R.H. (non-condensing) 0.22dB/km Insertion Loss per Connector <0.3 db, Typical 0.25 db Return Loss UPC: > 50dB, Typical 55dB APC: > 60dB, Typical 65dB Curvature Radius PC/UPC: 7 to 25mm APC 5 to 12 mm Apex Offset < 50um Fiber Height < 100nm Repeatability 500 cycles Macrobending 10 turns at 1550nm) 0.50 db/km Minimum Bend radius 15mm (0.59") Chromatic nm: nm 18.0 ps/(nm-km) Zero-dispersion Wavelength p 1300 p 1324nm Zero-dispersion slope So So ps/(nm2-km) Polarization Mode Dispersion (uncabled fiber) Service Life y y Most connector types are available (partial listing) 127 Business Park 0.20 Drive., ps/ km Frankfort, NY Lifetime Against Manufacturing Defects Toll Free: Fax: sales@fi berdyne.com 57 p indd 57 12/12/07 10:42:10 AM

58 Fiberdyne Labs Mulitmode 62.5/125 Fiber Jumper Cables 58 OM1 Part Number F9C11B2GC66XX(F or M) F9C11B2GC61XX(F or M) F9C11B2GC67XX(F or M) F9C11B2GC77XX(F or M) F9C11B2GC71XX(F or M) F9C11B2GC11XX(F or M) Part Number F9C21B2GC66XX(F or M) F9C21B2GCYYXX(F or M) F9C21B2GC61XX(F or M) F9C21B2GCY1XX(F or M) F9C21B2GC67XX(F or M) F9C21B2GCY7XX(F or M) F9C21B2GC77XX(F or M) F9C21B2GC71XX(F or M) F9C21B2GC11XX(F or M) Part Number F9C11B4GCL6XX(F or M) F9C11B4GCL1XX(F or M) F9C11B4GCL7XX(F or M) F9C11B4GCLLXX(F or M) Part Number F9C21B4GCL6XX(F or M) F9C21B4GCCYXX(F or M) F9C21B4GCL1XX(F or M) F9C21B4GCC1XX(F or M) F9C21B4GCL7XX(F or M) F9C21B4GCC7XX(F or M) F9C21B4GCLLXX(F or M) F9C21B4GCCCXX(F or M) Part Number F9C11B3GC66XX(F or M) F9C11B3GC61XX(F or M) F9C11B3GC67XX(F or M) F9C11B3GC77XX(F or M) F9C11B3GC71XX(F or M) F9C11B3GC11XX(F or M) Part Number F9C21B3GCL6XX(F or M) F9C21B3GCCYXX(F or M) F9C21B3GCL1XX(F or M) F9C21B3GCC1XX(F or M) F9C21B3GCL7XX(F or M) F9C21B3GCC7XX(F or M) F9C21B3GCLLXX(F or M) F9C21B3GCCCXX(F or M) Part Number F9C26B2GCM6XX(F or M) F9C26B2GCMYXX(F or M) F9C26B2GCM1XX(F or M) F9C26B2GCM7XX(F or M) F9C26B2GCMLXX(F or M) F9C26B2GCMCXX(F or M) F9C26B2GCMMXX(F or M) Description MM 3.0MM SIMPLEX, SC-SC MM 3.0MM SIMPLEX, SC-ST MM 3.0MM SIMPLEX, SC-FC MM 3.0MM SIMPLEX, FC-FC MM 3.0MM SIMPLEX, FC-ST MM 3.0MM SIMPLEX, ST-ST Description MM 3.0MM DUPLEX, SC-SC MM 3.0MM DUPLEX, SC-SC, YOKED MM 3.0MM DUPLEX, SC-ST MM 3.0MM DUPLEX, SC YOKED-ST MM 3.0MM DUPLEX, SC-FC MM 3.0MM DUPLEX, SC YOKED-FC MM 3.0MM DUPLEX, FC-FC MM 3.0MM DUPLEX, FC-ST MM 3.0MM DUPLEX, ST-ST Description MM 2.0MM SIMPLEX, LC-SC MM 2.0MM SIMPLEX, LC-ST MM 2.0MM SIMPLEX, LC-FC MM 2.0MM SIMPLEX, LC-LC Description MM 2.0MM DUPLEX, LC-SC MM 2.0MM DUPLEX, LC-SC, YOKED MM 2.0MM DUPLEX, LC-ST MM 2.0MM DUPLEX, LC-ST, YOKED MM 2.0MM DUPLEX, LC-FC MM 2.0MM DUPLEX, LC-FC, YOKED MM 2.0MM DUPLEX, LC-LC MM 2.0MM DUPLEX, LC-LC, YOKED Description MM 1.6MM SIMPLEX, SC-SC MM 1.6MM SIMPLEX, SC-ST MM 1.6MM SIMPLEX, SC-FC MM 1.6MM SIMPLEX, FC-FC MM 1.6MM SIMPLEX, FC-ST MM 1.6MM SIMPLEX, ST-ST Description MM 1.6MM DUPLEX, LC-SC MM 1.6MM DUPLEX, LC-SC, YOKED MM 1.6MM DUPLEX, LC-ST MM 1.6MM DUPLEX, LC-ST, YOKED MM 1.6MM DUPLEX, LC-FC MM 1.6MM DUPLEX, LC-FC, YOKED MM 1.6MM DUPLEX, LC-LC MM 1.6MM DUPLEX, LC-LC, YOKED Description MM 2 FIBER RIBBON, MTRJ-SC MM 2 FIBER RIBBON, MTRJ-SC, YOKED MM 2 FIBER RIBBON, MTRJ-ST MM 2 FIBER RIBBON, MTRJ-FC MM 2 FIBER RIBBON, MTRJ-LC MM 2 FIBER RIBBON, MTRJ-LC, YOKED MM 2 FIBER RIBBON, MTRJ-MTRJ 3mm Simplex 3mm Duplex 2mm Simplex 2mm Duplex 1.6mm Simplex 1.6mm Duplex Ribbon Duplex Connector specifications, pictures, and part number build matrix are available on pages Cable specifications are available on pages and online. p indd 58 12/12/07 10:42:29 AM

59 Fiberdyne Labs Mulitmode 50/125 and Laser Speed 50/125 OM3 Cables OM2 Part Number Description F9C11C1GC66XX(F or M) MM 3.0MM SIMPLEX, SC-SC F9C11C1GC61XX(F or M) MM 3.0MM SIMPLEX, SC-ST F9C11C1GC67XX(F or M) MM 3.0MM SIMPLEX, SC-FC F9C11C1GC77XX(F or M) MM 3.0MM SIMPLEX, FC-FC F9C11C1GC71XX(F or M) MM 3.0MM SIMPLEX, FC-ST F9C11C1GC11XX(F or M) MM 3.0MM SIMPLEX, ST-ST Part Number Description F9C21C1GC66XX(F or M) MM 3.0MM DUPLEX, SC-SC F9C21C1GCYYXX(F or M) MM 3.0MM DUPLEX, SC-SC, YOKED F9C21C1GC61XX(F or M) MM 3.0MM DUPLEX, SC-ST F9C21C1GCY1XX(F or M) MM 3.0MM DUPLEX, SC YOKED-ST F9C21C1GC67XX(F or M) MM 3.0MM DUPLEX, SC-FC F9C21C1GCY7XX(F or M) MM 3.0MM DUPLEX, SC YOKED-FC F9C21C1GC77XX(F or M) MM 3.0MM DUPLEX, FC-FC F9C21C1GC71XX(F or M) MM 3.0MM DUPLEX, FC-ST F9C21C1GC11XX(F or M) MM 3.0MM DUPLEX, ST-ST Part Number Description F9C11C2GCL6XX(F or M) MM 2.0MM SIMPLEX, LC-SC F9C11C2GCL1XX(F or M) MM 2.0MM SIMPLEX, LC-ST F9C11C2GCL7XX(F or M) MM 2.0MM SIMPLEX, LC-FC F9C11C2GCLLXX(F or M) MM 2.0MM SIMPLEX, LC-LC Part Number Description F9C21C2GCL6XX(F or M) MM 2.0MM DUPLEX, LC-SC F9C21C2GCCYXX(F or M) MM 2.0MM DUPLEX, LC-SC, YOKED F9C21C2GCL1XX(F or M) MM 2.0MM DUPLEX, LC-ST F9C21C2GCC1XX(F or M) MM 2.0MM DUPLEX, LC-ST, YOKED F9C21C2GCL7XX(F or M) MM 2.0MM DUPLEX, LC-FC F9C21C2GCC7XX(F or M) MM 2.0MM DUPLEX, LC-FC, YOKED F9C21C2GCLLXX(F or M) MM 2.0MM DUPLEX, LC-LC F9C21C2GCCCXX(F or M) MM 2.0MM DUPLEX, LC-LC, YOKED Part Number Description F9C11C3GCL6XX(F or M) MM 1.6MM SIMPLEX, LC-SC F9C11C3GCL1XX(F or M) MM 1.6MM SIMPLEX, LC-ST F9C11C3GCL7XX(F or M) MM 1.6MM SIMPLEX, LC-FC F9C11C3GCLLXX(F or M) MM 1.6MM SIMPLEX, LC-LC Part Number Description F9C21C3GCL6XX(F or M) MM 1.6MM DUPLEX, LC-SC F9C21C3GCCYXX(F or M) MM 1.6MM DUPLEX, LC-SC, YOKED F9C21C3GCL1XX(F or M) MM 1.6MM DUPLEX, LC-ST F9C21C3GCC1XX(F or M) MM 1.6MM DUPLEX, LC-ST, YOKED F9C21C3GCL7XX(F or M) MM 1.6MM DUPLEX, LC-FC F9C21C3GCC7XX(F or M) MM 1.6MM DUPLEX, LC-FC, YOKED F9C21C3GCLLXX(F or M) MM 1.6MM DUPLEX, LC-LC F9C21C3GCCCXX(F or M) MM 1.6MM DUPLEX, LC-LC, YOKED Part Number Description F9C26C1GCM6XX(F or M) MM 2 FIBER RIBBON, MTRJ-SC F9C26C1GCMYXX(F or M) MM 2 FIBER RIBBON, MTRJ-SC, YOKED F9C26C1GCM1XX(F or M) MM 2 FIBER RIBBON, MTRJ-ST F9C26C1GCM7XX(F or M) MM 2 FIBER RIBBON, MTRJ-FC F9C26C1GCMLXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC F9C26C1GCMCXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC, YOKED F9C26C1GCMMXX(F or M) MM 2 FIBER RIBBON, MTRJ-MTRJ Part Number F9C11C1GC66XX(F or M) F9C11C1GC61XX(F or M) F9C11C1GC67XX(F or M) F9C11C1GC77XX(F or M) F9C11C1GC71XX(F or M) F9C11C1GC11XX(F or M) Part Number F9C21C1GC66XX(F or M) F9C21C1GCYYXX(F or M) F9C21C1GC61XX(F or M) F9C21C1GCY1XX(F or M) F9C21C1GC67XX(F or M) F9C21C1GCY7XX(F or M) F9C21C1GC77XX(F or M) F9C21C1GC71XX(F or M) F9C21C1GC11XX(F or M) Part Number F9C11C2GCL6XX(F or M) F9C11C2GCL1XX(F or M) F9C11C2GCL7XX(F or M) F9C11C2GCLLXX(F or M) Part Number F9C21C2GCL6XX(F or M) F9C21C2GCCYXX(F or M) F9C21C2GCL1XX(F or M) F9C21C2GCC1XX(F or M) F9C21C2GCL7XX(F or M) F9C21C2GCC7XX(F or M) F9C21C2GCLLXX(F or M) F9C21C2GCCCXX(F or M) Part Number F9C11C3GCL6XX(F or M) F9C11C3GCL1XX(F or M) F9C11C3GCL7XX(F or M) F9C11C3GCLLXX(F or M) Part Number F9C21C3GCL6XX(F or M) F9C21C3GCCYXX(F or M) F9C21C3GCL1XX(F or M) F9C21C3GCC1XX(F or M) F9C21C3GCL7XX(F or M) F9C21C3GCC7XX(F or M) F9C21C3GCLLXX(F or M) F9C21C3GCCCXX(F or M) Part Number F9C26C1GCM6XX(F or M) F9C26C1GCMYXX(F or M) F9C26C1GCM1XX(F or M) F9C26C1GCM7XX(F or M) F9C26C1GCMLXX(F or M) F9C26C1GCMCXX(F or M) F9C26C1GCMMXX(F or M) OM3 Description MM 3.0MM SIMPLEX, SC-SC MM 3.0MM SIMPLEX, SC-ST MM 3.0MM SIMPLEX, SC-FC MM 3.0MM SIMPLEX, FC-FC MM 3.0MM SIMPLEX, FC-ST MM 3.0MM SIMPLEX, ST-ST Description MM 3.0MM DUPLEX, SC-SC MM 3.0MM DUPLEX, SC-SC, YOKED MM 3.0MM DUPLEX, SC-ST MM 3.0MM DUPLEX, SC YOKED-ST MM 3.0MM DUPLEX, SC-FC MM 3.0MM DUPLEX, SC YOKED-FC MM 3.0MM DUPLEX, FC-FC MM 3.0MM DUPLEX, FC-ST MM 3.0MM DUPLEX, ST-ST Description MM 2.0MM SIMPLEX, LC-SC MM 2.0MM SIMPLEX, LC-ST MM 2.0MM SIMPLEX, LC-FC MM 2.0MM SIMPLEX, LC-LC Description MM 2.0MM DUPLEX, LC-SC MM 2.0MM DUPLEX, LC-SC, YOKED MM 2.0MM DUPLEX, LC-ST MM 2.0MM DUPLEX, LC-ST, YOKED MM 2.0MM DUPLEX, LC-FC MM 2.0MM DUPLEX, LC-FC, YOKED MM 2.0MM DUPLEX, LC-LC MM 2.0MM DUPLEX, LC-LC, YOKED Description MM 1.6MM SIMPLEX, LC-SC MM 1.6MM SIMPLEX, LC-ST MM 1.6MM SIMPLEX, LC-FC MM 1.6MM SIMPLEX, LC-LC Description MM 1.6MM DUPLEX, LC-SC MM 1.6MM DUPLEX, LC-SC, YOKED MM 1.6MM DUPLEX, LC-ST MM 1.6MM DUPLEX, LC-ST, YOKED MM 1.6MM DUPLEX, LC-FC MM 1.6MM DUPLEX, LC-FC, YOKED MM 1.6MM DUPLEX, LC-LC MM 1.6MM DUPLEX, LC-LC, YOKED Description MM 2 FIBER RIBBON, MTRJ-SC MM 2 FIBER RIBBON, MTRJ-SC, YOKED MM 2 FIBER RIBBON, MTRJ-ST MM 2 FIBER RIBBON, MTRJ-FC MM 2 FIBER RIBBON, MTRJ-LC MM 2 FIBER RIBBON, MTRJ-LC, YOKED MM 2 FIBER RIBBON, MTRJ-MTRJ 59 p indd 59 12/12/07 10:42:43 AM

60 Utility, Military & Industrial Fiber Optic Cable Assemblies Military Tactical Cable: Extremely strong, lightweight, rugged, survivable, tight-buffer cable designed for military/tactical use and commercial applications. Breakout cable design with an individual color coded sub-cable surrounding each optical fiber. Crush resistant and resilient. Helically stranded cable core for flexibility, survival in difficult pulls and superior mechanical protection for the optical fibers. Can be used outdoors on the ground in all terrain including severe environments. Chemical resistant and suitable for manufacturing, mining and petrochemical environments. Round cable design for easy installation and survivability. Polyurethane jacketed for abrasion, cut and chemical resistance. Connector: D3899/20WC4BN* military connector, metal with a corrosion resistant olive drab cadmium plate aluminum finish. Connectors operate at severe high temperature, vibration through 200 C. *Multiple Configurations available (ie. different types of military connectors) Backshell: Anodized aluminum 60 p indd 60 12/12/07 10:57:21 AM

61 Environmental Enclosure Fiberdyne Environmental Enclosure The Fiberdyne Labs, Inc. Environmental Enclosure is a Leading Choice for Terminating Utility/ Military Fiber Assemblies in the Field. Call For Pricing. 61 p indd 61 12/12/07 11:13:16 AM

62 Mode Conditioning Cables Available Connectors: EQUIPMENT SIDE SC MT-RJ LC FC ST New! Mode Conditioning Adapter for SC Available Online! Available Connectors: FIBER PLANT SIDE SC ST MT-RJ LC ETC. Fiber Type Distance 62.5 um 550 m 50 um 500 m 9 um SM 5000 m For use with Gigabit Ethernet LX Equipment ports. Compliant with IEEE 802.3z specifications. Available with 50 um and 62.5 um multimode cable. Fiberdyne Labs, Inc. Mode Conditioning Cable is designed for use in Gigabit Ethernet 1000BASE-LX (1300nm long wavelength) applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables, also known as Gigabit launch cables, are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The primary function of the Mode Conditioning Cable is to provide an offset launch of the 8.3 um singlemode core, into the 62.5 or 50 um multimode core. This offset is required because of a condition known as Differential Mode Delay (DMD). DMD or multiple overlapping signals, can occur when a singlemode signal is launched into the area of a multimode core that contains a dip in the index of refraction. Fiberdyne Labs, Inc. Mode Conditioning Cables can be ordered in a variety of connector styles and lengths. The following are examples of available configurations: PART NUMBER F9C21K1GC6603M F9C22K1GC6603M F9C21K2GC6603M F9C22K1GC6603M DESCRIPTION SC EQUIPMENT, SC PLANT, RISER, 62.5/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, SC PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, SC PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, SC PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters 62 p indd 62 12/12/07 11:13:31 AM

63 Mode Conditioning Cables PART NUMBER F9C21K1GC6103M F9C22K1GC6103M F9C21K2GC6103M F9C22K2GC6103M DESCRIPTION SC EQUIPMENT, ST PLANT, RISER, 62.5/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, ST PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, ST PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters SC EQUIPMENT, ST PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters PART NUMBER F9C21K1GCL603M F9C22K1GCL603M F9C21K2GCL603M F9C22K2GCL603M DESCRIPTION LC EQUIPMENT, SC PLANT, RISER, 62.5/125, 3 METERS Available from 1 to 25 meters LC EQUIPMENT, SC PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters LC EQUIPMENT, SC PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters LC EQUIPMENT, SC PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters PART NUMBER F9C21K1GCL103M F9C22K1GCL103M F9C21K2GCL103M F9C22K2GCL103M DESCRIPTION LC EQUIPMENT, ST PLANT, RISER, 62.5/125, 3 METER Available from 1 to 25 meters LC EQUIPMENT, ST PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters LC EQUIPMENT, ST PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters LC EQUIPMENT, ST PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters PART NUMBER F9C21K1GCM603M F9C22K1GCM603M F9C21K2GCM603M F9C22K2GCM603M DESCRIPTION MTRJ EQUIPMENT, SC PLANT, RISER, 62.5/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, SC PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, SC PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, SC PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters PART NUMBER F9C21K1GCM103M F9C22K1GCM103M F9C21K2GCM103M F9C22K2GCM103M DESCRIPTION MTRJ EQUIPMENT, ST PLANT, RISER, 62.5/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, ST PLANT, PLENUM, 62.5/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, ST PLANT, RISER, 50/125, 3 METERS Available from 1 to 25 meters MTRJ EQUIPMENT, ST PLANT, PLENUM, 50/125, 3 METERS Available from 1 to 25 meters Note: Other connector configurations are available 63 p indd 63 12/12/07 11:13:46 AM

64 Singlemode SC/UPC and SC/APC Pigtails SC/UPC Ceramic Ferrule,.25dB typical Insertion Loss -55db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers F9G11A2GC6001M F9G11A1GC6001M F9G1BA1GC6001M F9G1BA1GC6001M-6P F9G1BA1GC6001M-12P 1 Meter 2 Meter F9G11A2GC6002M F9G11A1GC6002M F9G1BA1GC6002M F9G1BA1GC6002M-6P F9G1BA1GC6002M-12P 3 Meter F9G11A2GC6003M F9G11A1GC6003M F9G1BA1GC6003M F9G1BA1GC6003M-6P F9G1BA1GC6003M-12P SC/APC Ceramic Ferrule,.25dB typical Insertion Loss -65db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers 1 Meter F9G11A2GCB001M F9G11A1GCB001M F9G1BA1GCB001M F9G1BA1GCB001M-6P F9G1BA1GCB001M-12P 2 Meter F9G11A2GCB002M F9G11A1GCB002M F9G1BA1GCB002M F9G1BA1GCB002M-6P F9G1BA1GCB002M-12P 3 Meter F9G11A2GCB003M F9G11A1GCB003M F9G1BA1GCB003M F9G1BA1GCB003M-6P F9G1BA1GCB003M-12P 64 p indd 64 12/12/07 11:15:39 AM

65 Singlemode FC/UPC and FC/APC Pigtails FC/UPC Ceramic Ferrule,.25dB typical Insertion Loss -55db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers F9G11A2GC7001M F9G11A1GC7001M F9G1BA1GC7001M F9G1BA1GC7001M-6P F9G1BA1GC7001M-12P 1 Meter 2 Meter F9G11A2GC7002M F9G11A1GC7002M F9G1BA1GC7002M F9G1BA1GC7002M-6P F9G1BA1GC7002M-12P 3 Meter F9G11A2GC7003M F9G11A1GC7003M F9G1BA1GC7003M F9G1BA1GC7003M-6P F9G1BA1GC7003M-12P FC/APC Ceramic Ferrule,.25dB typical Insertion Loss -65db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers F9G11A2GCA001M F9G11A1GCA001M F9G1BA1GCA001M F9G1BA1GCA001M-6P F9G1BA1GCA001M-12P 1 Meter 2 Meter F9G11A2GCA002M F9G11A1GCA002M F9G1BA1GCA002M F9G1BA1GCA002M-6P F9G1BA1GCA002M-12P 3 Meter F9G11A2GCA003M F9G11A1GCA003M F9G1BA1GCA003M F9G1BA1GCA003M-6P F9G1BA1GCA003M-12P 65 p indd 65 12/12/07 11:18:02 AM

66 Singlemode ST/UPC and LC/UPC Pigtails ST/UPC Ceramic Ferrule,.25dB typical Insertion Loss -55db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers 1 Meter F9G11A2GC1001M F9G11A1GC1001M F9G1BA4GC1001M F9G1BA4GC1001M-6P F9G1BA4GC1001M-12P 2 Meter F9G11A2GC1002M F9G11A1GC1002M F9G1BA4GC1002M F9G1BA4GC1002M-6P F9G1BA4GC1002M-12P 3 Meter F9G11A2GC1003M F9G11A1GC1003M F9G1BA4GC1003M F9G1BA4GC6003M-6P F9G1BA4GC1003M-12P LC/UPC Ceramic Ferrule,.25dB typical Insertion Loss -55db typical back reflection 1 Fiber 1 Fiber 2MM Jacket 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers 1 Meter F9G11A2GCL001M F9G11A1GCL001M F9G1BA4GCL001M F9G1BA4GCL001M-6P F9G1BA4GCL001M-12P 2 Meter F9G11A2GCL002M F9G11A1GCL002M F9G1BA4GCL002M F9G1BA4GCL002M-6P F9G1BA4GCL002M-12P 3 Meter F9G11A2GCL003M F9G11A1GCL003M F9G1BA4GCL003M F9G1BA4GCL003M-6P F9G1BA4GCL003M-12P LC/APC Ceramic Ferrule,.25dB typical Insertion Loss -55db typical back reflection 1 Fiber 2MM Jacket 1 Fiber 3MM Jacket 1 Fiber 900um Buffer 6 Colors 900um Buffer 12 Colors 900um Buffer 6 Fibers 12 Fibers 1 Meter F9G11A2GCN001M F9G11A1GCN001M F9G1BA4GCN001M F9G1BA4GCN001M-6P F9G1BA4GCN001M-12P 2 Meter F9G11A2GCN002M F9G11A1GCN002M F9G1BA4GCN002M F9G1BA4GCN002M-6P F9G1BA4GCN002M-12P 3 Meter F9G11A2GCN003M F9G11A1GCN003M F9G1BA4GCN003M F9G1BA4GCN003M-6P F9G1BA4GCN003M-12P 66 p indd 66 12/12/07 11:18:28 AM

67 Multimode ST, SC and LC Pigtails Ceramic Ferrule,.25dB typical Insertion Loss 6 Colors 900um Buffer 12 Colors 900um Buffer ST 1 Fiber 3MM Jacket 1 Fiber 900um Buffer 6 Fibers 12 Fibers 1 Meter F9G11B2GC1001M F9G1BB1GC1001M F9G1BB1GC1001M-6P F9G1BB1GC1001M-12P 2 Meter F9G11B2GC1002M F9G1BB1GC1002M F9G1BB1GC1002M-6P F9G1BB1GC1002M-12P 3 Meter SC 1 Meter F9G11B2GC1003M F9G1BB1GC1003M F9G1BB1GC1003M-6P F9G1BB1GC1003M-12P F9G11B2GC6001M F9G1BB1GC6001M F9G1BB1GC6001M-6P F9G1BB1GC6001M-12P 2 Meter F9G11B2GC6002M F9G1BB1GC6002M F9G1BB1GC6002M-6P F9G1BB1GC6002M-12P 3 Meter LC 1 Meter F9G11B2GC6003M F9G1BB1GC6003M F9G1BB1GC6003M-6P F9G1BB1GC6003M-12P 2.0 mm Jacket F9G11B4GCL001M F9G1BB1GCL001M F9G1BB1GCL001M-6P F9G1BB1GCL001M-12P 2 Meter F9G11B4GCL002M F9G1BB1GCL002M F9G1BB1GCL002M-6P F9G1BB1GCL002M-12P F9G11B42GCL003M F9G1BB1GCL003M F9G1BB1GCL003M-6P F9G1BB1GCL003M-12P 3 Meter 67 p indd 67 12/12/07 11:18:46 AM

68 Singlemode Jumper Style Preconnectorized Backbone/Stub Cable Blue Orange Green Brown Gray White Red Black Yellow Violet Pink Turquoise 900 um breakout (See page 70 for 3mm) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9C51A1GC66XXF-900 F9C52A1GC66XXF-900 F9C53A1GC66XXF-900 CALL CALL 6 F9C61A1GC66XXF-900 F9C62A1GC66XXF-900 F9C63A1GC66XXF-900 F9C64A1GC66XXF-900 F9C65A1GC66XXF FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 12 F9C81A1GC66XXF-900 F9C82A1GC66XXF-900 F9C83A1GC66XXF-900 F9C84A1GC66XXF-900 F9C85A1GC66XXF F9C91A1GC66XXF-900 F9C92A1GC66XXF-900 F9C93A1GC66XXF-900 F9C94A1GC66XXF-900 F9C95A1GC66XXF F9CB1A1GC66XXF-900 F9CB2A1GC66XXF-900 F9CB3A1GC66XXF-900 CALL CALL 48 F9CC1A1GC66XXF-900 F9CC2A1GC66XXF-900 F9CC3A1GC66XXF-900 CALL CALL 72 F9CD1A1GC66XXF-900 F9CD2A1GC66XXF-900 F9CD3A1GC66XXF-900 CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 68 p indd 68 12/12/07 11:19:03 AM

69 Singlemode "Pigtail" Style Preconnectorized Backbone/Stub Cable Blue Orange Green Brown Gray White Red Black Yellow Violet Pink Turquoise 900 um breakout (See page 71 for 3mm) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9G51A1GC60XXF-900 F9G52A1GC60XXF-900 F9G53A1GC60XXF-900 CALL CALL 6 F9G61A1GC60XXF-900 F9G62A1GC60XXF-900 F9G63A1GC60XXF-900 F9G64A1GC60XXF-900 F9G65A1GC60XXF FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 12 F9G81A1GC60XXF-900 F9G82A1GC60XXF-900 F9G83A1GC60XXF-900 F9G84A1GC60XXF-900 F9G85A1GC60XXF F9G91A1GC60XXF-900 F9G92A1GC60XXF-900 F9G93A1GC60XXF-900 F9G94A1GC60XXF-900 F9G95A1GC60XXF F9GB1A1GC60XXF-900 F9GB2A1GC60XXF-900 F9GB3A1GC60XXF-900 CALL CALL 48 F9GC1A1GC60XXF-900 F9GC2A1GC60XXF-900 F9GC3A1GC60XXF-900 CALL CALL 72 F9GD1A1GC60XXF-900 F9GD2A1GC60XXF-900 F9GD3A1GC60XXF-900 CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 69 p indd 69 12/12/07 11:19:18 AM

70 Singlemode Jumper Style Preconnectorized Backbone/Stub Cable 3mm breakout (See page 68 for 900um) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9C51A1GC66XXF-3MM F9C52A1GC66XXF-3MM F9C53A1GC66XXF-3MM CALL CALL 6 F9C61A1GC66XXF-3MM F9C62A1GC66XXF-3MM F9C63A1GC66XXF-3MM F9C64A1GC66XXF-3MM F9C65A1GC66XXF-3MM 8 8 FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 12 F9C81A1GC66XXF-3MM F9C82A1GC66XXF-3MM F9C83A1GC66XXF-3MM F9C84A1GC66XXF-3MM F9C85A1GC66XXF-3MM 24 F9C91A1GC66XXF-3MM F9C92A1GC66XXF-3MM F9C93A1GC66XXF-3MM F9C94A1GC66XXF-3MM F9C95A1GC66XXF-3MM 36 F9CB1A1GC66XXF-3MM F9CB2A1GC66XXF-3MM F9CB3A1GC66XXF-3MM CALL CALL 48 F9CC1A1GC66XXF-3MM F9CC2A1GC66XXF-3MM F9CC3A1GC66XXF-3MM CALL CALL 72 F9CD1A1GC66XXF-3MM F9CD2A1GC66XXF-3MM F9CD3A1GC66XXF-3MM CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 144 FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE p indd 70 12/12/07 11:19:36 AM

71 Singlemode "Pigtail" Style Preconnectorized Backbone/Stub Cable 3mm breakout (See page 69 for 900um) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9G51A1GC60XXF-3MM F9G52A1GC60XXF-3MM F9G53A1GC60XXF-3MM CALL CALL 6 F9G61A1GC60XXF-3MM F9G62A1GC60XXF-3MM F9G63A1GC60XXF-3MM F9G64A1GC60XXF-3MM F9G65A1GC60XXF-3MM 8 8 FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 12 F9G81A1GC60XXF-3MM F9G82A1GC60XXF-3MM F9G83A1GC60XXF-3MM F9G84A1GC60XXF-3MM F9G85A1GC60XXF-3MM 24 F9G91A1GC60XXF-3MM F9G92A1GC60XXF-3MM F9G93A1GC60XXF-3MM F9G94A1GC60XXF-3MM F9G95A1GC60XXF-3MM 36 F9GB1A1GC60XXF-3MM F9GB2A1GC60XXF-3MM F9GB3A1GC60XXF-3MM CALL CALL 48 F9GC1A1GC60XXF-3MM F9GC2A1GC60XXF-3MM F9GC3A1GC60XXF-3MM CALL CALL 72 F9GD1A1GC60XXF-3MM F9GD2A1GC60XXF-3MM F9GD3A1GC60XXF-3MM CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 144 FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE p indd 71 12/12/07 11:19:54 AM

72 Fiber Count Multimode Jumper Style Preconnectorized Backbone/Stub Cable Blue Orange Green Brown Gray White Red Black Yellow Violet Pink Turquoise 900 um breakout (See page 74 for 3mm) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Call for 50um and 10 Gig OM3 50um INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9C51B2GC66XXF-900 F9C52B2GC66XXF-900 F9C53B2GC66XXF-900 CALL CALL 6 F9C61B2GC66XXF-900 F9C62B2GC66XXF-900 F9C63B2GC66XXF-900 F9C64B2GC66XXF-900 F9C65B2GC66XXF F9C71B2GC66XXF-900 F9C72B2GC66XXF-900 CALL CALL CALL 12 F9C81B2GC66XXF-900 F9C82B2GC66XXF-900 F9C83B2GC66XXF-900 F9C84B2GC66XXF-900 F9C85B2GC66XXF F9C91B2GC66XXF-900 F9C92B2GC66XXF-900 F9C93B2GC66XXF-900 CALL CALL 36 F9CB1B2GC66XXF-900 F9CB2B2GC66XXF-900 F9CB3B2GC66XXF-900 CALL CALL 48 F9CC1B2GC66XXF-900 F9CC2B2GC66XXF-900 CALL CALL CALL 72 F9CD1B2GC66XXF-900 F9CD2B2GC66XXF-900 CALL CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 72 p indd 72 12/12/07 11:20:11 AM

73 Fiber Count Multimode Pigtail Style Preconnectorized Backbone/Stub Cable Blue Orange Green Brown Gray White Red Black Yellow Violet Pink Turquoise 900 um breakout (See page 75 for 3mm) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Call for 50um and 10 Gig OM3 50um INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9G51B2GC60XXF-900 F9G52B2GC60XXF-900 F9G53B2GC60XXF-900 CALL CALL 6 F9G61B2GC60XXF-900 F9G62B2GC60XXF-900 F9G63B2GC60XXF-900 F9G64B2GC60XXF-900 F9G65B2GC60XXF F9G71B2GC60XXF-900 F9G72B2GC60XXF-900 CALL CALL CALL 12 F9G81B2GC60XXF-900 F9G82B2GC60XXF-900 F9G83B2GC60XXF-900 F9G84B2GC60XXF-900 F9G85B2GC60XXF F9G91B2GC60XXF-900 F9G92B2GC60XXF-900 F9G93B2GC60XXF-900 CALL CALL 36 F9GB1B2GC60XXF-900 F9GB2B2GC60XXF-900 F9GB3B2GC60XXF-900 CALL CALL 48 F9GC1B2GC60XXF-900 F9GC2B2GC60XXF-900 CALL CALL CALL 72 F9GD1B2GC60XXF-900 F9GD2B2GC60XXF-900 CALL CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 73 p indd 73 12/12/07 11:20:29 AM

74 Multimode Jumper Style Preconnectorized Backbone/Stub Cable 3mm breakout (See page 72 for 900um) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Call for 50um and 10 Gig OM3 50um Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9C51B2GC66XXF-3MM F9C52B2GC66XXF-3MM F9C53B2GC66XXF-3MM CALL CALL 6 F9C61B2GC66XXF-3MM F9C62B2GC66XXF-3MM F9C63B2GC66XXF-3MM F9C64B2GC66XXF-3MM F9C65B2GC66XXF-3MM 8 F9C71B2GC66XXF-3MM F9C72B2GC66XXF-3MM CALL CALL CALL 12 F9C81B2GC66XXF-3MM F9C82B2GC66XXF-3MM F9C83B2GC66XXF-3MM F9C84B2GC66XXF-3MM F9C85B2GC66XXF-3MM 24 F9C91B2GC66XXF-3MM F9C92B2GC66XXF-3MM F9C93B2GC66XXF-3MM CALL CALL 36 F9CB1B2GC66XXF-3MM F9CB2B2GC66XXF-3MM F9CB3B2GC66XXF-3MM CALL CALL 48 F9CC1B2GC66XXF-3MM F9CC2B2GC66XXF-3MM CALL CALL CALL 72 F9CD1B2GC66XXF-3MM F9CD2B2GC66XXF-3MM CALL CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 74 p indd 74 12/12/07 11:20:45 AM

75 Multimode Pigtail Style Preconnectorized Backbone/Stub Cable 3mm breakout (See page 73 for 900um) SC connectors standard. Call for other connector types. Pulling eyes available to facilitate installation Call with custom requirements (ie. Installed in Innerduct) Call for 50um and 10 Gig OM3 50um Fiber Count INDOOR/OUTDOOR INDOOR INDOOR TIGHT BUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED 4 F9G51B2GC6OXXF-3MM F9G52B2GC60XXF-3MM F9G53B2GC60XXF-3MM CALL CALL 6 F9G61B2GC60XXF-3MM F9G62B2GC60XXF-3MM F9G63B2GC60XXF-3MM F9G64B2GC60XXF-3MM F9G65B2GC60XXF-3MM 8 F9G71B2GC60XXF-3MM F9G72B2GC60XXF-3MM CALL CALL CALL 12 F9G81B2GC60XXF-3MM F9G82B2GC60XXF-3MM F9G83B2GC60XXF-3MM F9G84B2GC60XXF-3MM F9G85B2GC60XXF-3MM 24 F9G91B2GC60XXF-3MM F9G92B2GC60XXF-3MM F9G93B2GC60XXF-3MM CALL CALL 36 F9GB1B2GC60XXF-3MM F9GB2B2GC60XXF-3MM F9GB3B2GC60XXF-3MM CALL CALL 48 F9GC1B2GC60XXF-3MM F9GC2B2GC60XXF-3MM CALL CALL CALL 72 F9GD1B2GC60XXF-3MM F9GD2B2GC60XXF-3MM CALL CALL CALL FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE 75 p indd 75 12/12/07 11:21:00 AM

76 Fiberdyne Labs Singlemode Riser Rated Cable Bulk Cable Singlemode Simplex and Duplex Riser 2.9mm and 2.0mm Cable Specifications: Fiber Core/Cladding 8.3/125 µm (Corning SMF-28e ) Characteristic Crush Resistance Impact Resistance Flexure Min Bend Radius (Long-term, No-load, Installed) Min Bend Radius (Short-term, Loaded, Installed) Operating Temperature Storage Temperature Singlemode (8.3/125 µm) 2000 N/cm 2000 Impacts w 1.6 Nm 2000 Cycles minimum 10X Cable Diameter 15X Cable Diameter -20 C To +70 C -40 C To +80 C Part Number Description F9B11A1-0000F Singlemode Simplex Riser F9B11A1-0000M rated 2.9mm jacketed cable F9B11A2-0000F Singlemode Simplex Riser F9B11A2-0000M rated 2.0mm jacketed cable F9B21A1-0000F Singlemode Duplex Riser F9B21A1-0000M rated 2.9mm jacketed cable F9B21A2-0000F Singlemode Duplex Riser F9B21A2-0000M rated 2.0mm jacketed cable (0000-denotes length, F=feet, M=meters.) Singlemode 6, 12, and 24 Fiber Riser Rated Cable Characteristic Specification Fiber Core/Cladding 8.3/125 µm (Corning SMF-28e ) Crush Resistance Tension, maximum Bend Radius, minimum, Long term, No-Load, Installed N/100m 1000 (Short term) 300 (Long term) N 1500 (Short term) 300 (Long term) 10X Cable Diameter Part Number Description F9B61A1-0000F Singlemode 6 Fiber F9B61A1-0000M Riser Rated Cable F9B81A1-0000F Singlemode 12 Fiber F9B81A1-0000M Riser Rated Cable F9B91A1-0000F Singlemode 24 Fiber F9B91A1-0000M Riser Rated Cable (0000-denotes length, F=feet, M=meters.) Bend Radius, minimum, Short term, Loaded, Installing 15X Cable Diameter Operating Temperature -20 C To +70 C Corning is a registered trademark of Corning Incorporated SMF-28e is a registered trademark of Corning Incorporated Storage Temperature -40 C To +80 C 76 p indd 76 12/12/07 11:21:15 AM

77 Bulk Cable Fiberdyne Labs Multimode (62.5/125UM) Riser Rated Cable Multimode Duplex Riser 2.9mm and 2.0mm Cable Specifications: Characteristic Multimode (62/125 µm) Crush Resistance 300 N/10 cm Impact Resistance 1 N-m, 5 impacts Torsion 5 kg, 1 turn, 5 cycles Min Bend Radius (Long-term, No-load, in-service) 10X Cable Diameter Min Bend Radius (Short-term, Loaded, during installation) 15X Cable Diameter Operating Temperature -10 C To +70 C Storage Temperature -20 C To +70 C Fiber Specifications: Numerical Aperture / Attenuation (850-nm / 1300-nm) <3.0 / <1.0 db/km Bandwidth (850-nm / 1300-nm) >250 / >600 MHz*km Part Number Description F9B21B2-0000F Multimode Duplex Riser F9B21B2-0000M rated 2.9mm jacketed cable F9B21B4-0000F Multimode Duplex Riser F9B21B4-0000M rated 2.0mm jacketed cable (0000-denotes length, F=feet, M=meters.) Characteristic Crush Resistance Tension, maximum Bend Radius, minimum, Long term, No-Load, Installed Bend Radius, minimum, Short term, Loaded, Installing Operating Temperature Storage Temperature Specification N/100m 1000 (Short term) 300 (Long term) N1500 (Short term) 300 (Long term) 10X Cable Diameter 15X Cable Diameter -20 C To +70 C -40 C To +80 C Fiber Specifications: Numerical Aperture / Attenuation (850-nm / 1300-nm) <3.0 / <1.0 db/km Bandwidth (850-nm / 1300-nm) >250 / >600 MHz*km Multimode Riser 6, 12, and 24 Fiber Cable Part Number F9B61A1-0000F F9B61A1-0000M F9B81A1-0000F F9B81A1-0000M F9B91A1-0000F F9B91A1-0000M Description Multimode 6 Fiber Riser Rated Cable Multimode 12 Fiber Riser Rated Cable Multimode 24 Fiber Riser Rated Cable (0000-denotes length, F=feet, M=meters.) 77 p indd 77 12/12/07 11:21:28 AM

78 Fiberdyne Termination Box Part Number Information FB * a b c d e f g h i j k Consult with your Fiberdyne Labs Representative for questions regarding termination box part numbers. h, i, j, k 78 a. BOX MANUFACTURER 1=CORNING * ADDITIONAL INFORMATION PARTIALLY LOADED PINS-MUST SPECIFY WITH OR WITHOUT PINS FOR MTRJ AND MTP BOXES SAMPLE: FB424A161203M Rackmount 72 Port Termination box loaded with 72 Singlemode Simplex SC adapters, fusion splice housing RSH-144 required (144 position splice housing), (6) FST-12 (12 position splice tray). (72) 3mm jacketed Simplex Singlemode SC(3) meter pigtails. CORNING is a registered trademark of Corning Incorporated 4= FIBERDYNE LABS BOX TYPE 1= WALLMOUNT 3= CABINET MOUNT 2= RACKMOUNT 4= 1U HIGH E= ENVIRONMENTAL 5= 2U HIGH (WALL/POLE MOUNT) L= CTM-072 (Fiberdyne L Bracket) c. CAPACITY 1= 12 PORT 5= 96 PORT 2= 24 PORT 6= 144 PORT 3= 48 PORT 7= 36 PORT 4= 72 PORT d. FIBER TYPE A1=SINGLEMODE Q1= 50/125 OM3 B2=MULTIMODE 62.5/125 X1= HYBRID C1=MULTIMODE 50/125 e. ADAPTER; MATING SLEEVE; INTERCONNECT SLEEVE 1= ST D= E2000 /APC R= MTRJ (WITH PINS) 2= FDDI E= E2000 /PC S= DUPLEX 6= SC F= QUAD LC T= MTP/APC (NO PINS) 7= FC G= LC/APC QUAD U= MU 8= ESCON H= MTP /APC (W PINS) W= SC/APC DUPLEX A= FC/APC M= MTRJ (NO PINS) X= CUSTOM CONFIGURATION B= SC/APC N= LC/APC Y= SC DUPLEX C= LC DUPLEX Q= MTP (WITH PINS) Z= BLANK PANEL f. SPLICE CAPACITY 0= NONE 1= FUSION SPLICING g. CABLE OPTION 0= NONE 3= MULTIPLE FIBER PIGTAIL 1= INDIVIDUAL 900UM PIGTAILS 4= MULTIPLE FIBER JUMPER 2= INDIVIDUAL JACKETED PIGTAILS X= CUSTOM CONFIGURATION FIBER PIGTAILS 0000= NONE = LENGTH FOLLOWED BY "M"(METERS) OR "F"(FEET) MTP is a registered trademark of US Conec, Ltd. E2000 is a registered trademark of Diamond 127 SA Business Park Drive., Frankfort, NY All trademarks are property of their respective owners FST Trays RTP-072 RTP-096 RTP-144 RSH-144 RTP-1UH RTP-2UH RTP-3UH More information available online including expanded view product photos WMB-12 WMB-24 p indd 78 12/12/07 11:22:24 AM

79 Save Time, Save Money with Pre-assembled Termination Boxes Fiberdyne Labs offers termination boxes, pre-assembled with adapters or pre-loaded with adapters and pigtails ready for fusion splicing. Most companies send boxes of parts that require assembly. Ask a Fiberdyne Labs representative about saving time and money! Go to for OM3 50um 10 GIG Adapter Panels 6 Pack Adapter Panels 8 Pack Adapter Panels 12 Pack Adapter Panels Adapter panels may be viewed online at fiberdyne.com Fiberdyne Termination Box Parts List Part Number Description RTP-072 X 72 PORT RACK MOUNT, ACCEPTS (12) FPA6 PANELS, 4 U HIGH RTP-096 X 96 PORT RACK MOUNT, ACCEPTS (12) FPA8 PANELS, 4 U HIGH RTP-144 X 144 PORT RACK MOUNT, ACCEPTS (12)FPA12 PANELS, 4 U HIGH RTP-1UH X 1U HIGH 19 INCH RACK, ACCEPTS (2) FPA PANELS & (2)REDUCED SPLICE TRAYS RTP-2UH X 2U HIGH 19 INCH RACK, ACCEPTS (4) FPA PANELS & (4)REDUCED SPLICE TRAYS RTP-3UH X 3U HIGH 19 INCH RACK, ACCEPTS (9) FPA PANELS & (2)FST SPLICE TRAYS CTM-018 X 1U HIGH 19 INCH PANEL, ACCEPTS (3) LGX MODULES OR (3) FPA PANELS CTM-072 X 4U HIGH 19 INCH PANEL, ACCEPTS (12)LGX MODULES OR (12) FPA PANELS F12A2 X CLAMP KIT, REQUIRED WITH THE RTP 072, 096 & 144 BOXES ONLY RSH CAPACITY SPLICE HOUSING, ACCEPTS (12) FST TRAYS FST CAPACITY FUSION SPLICE TRAY, 11 INCH NEW! Splice Module FST CAPACITY REDUCED FUSION SPLICE TRAY, 7 INCH 6 or 12 FST CAPACITY FUSION SPLICE TRAY, 11 INCH pigtail capacity FST CAPACITY REDUCED FUSION SPLICE TRAY, 7 INCH WMB PORT WALL MOUNT ( NO CLAMP KIT) ACCEPTS (2) FPA PANELS & (2)FST SPLICE TRAYS WMB PORT WALL MOUNT (NO CLAMP KIT ) ACCEPTS (4) FPA PANELS & (2)FST SPLICE TRAYS FP2XX X BLANK PANEL FPA6SCU X 6 POSITION SC PANEL, PRE-LOADED WITH 6 SIMPLEX SC/UPC SM ADAPTERS FPA6SCA X 6 POSITION SC PANEL, PRE-LOADED WITH 6 SIMPLEX SC/APC SM ADAPTERS FPA6SCM X 6 POSITION SC PANEL, PRE-LOADED WITH 6 SIMPLEX SC MM ADAPTERS FPA6FC X 6 POSITION FC PANEL, PRE-LOADED WITH 6 SIMPLEX FC SM/MM ADAPTERS FPA6FCA X 6 POSITION FC PANEL, PRE-LOADED WITH 6 SIMPLEX FC/APC SM ADAPTERS FPA6STU X 6 POSITION ST PANEL, PRE-LOADED WITH 6 SIMPLEX ST SM ADAPTERS FPA6STM X 6 POSITION ST PANEL, PRE-LOADED WITH 6 SIMPLEX ST MM ADAPTERS FPA8SCU X 8 POSITION SC PANEL, PRE-LOADED WITH 8 SIMPLEX SC/UPC SM ADAPTERS FPA8SCA X 8 POSITION SC PANEL, PRE-LOADED WITH 8 SIMPLEX SC/APC SM ADAPTERS FPA8SCM X 8 POSITION SC PANEL, PRE-LOADED WITH 8 SIMPLEX SC MM ADAPTERS FPA8FC X 8 POSITION FC PANEL, PRE-LOADED WITH 8 SIMPLEX FC SM/MM ADAPTERS FPA8FCA X 8 POSITION FC PANEL, PRE-LOADED WITH 8 SIMPLEX FC/APC SM ADAPTERS FPA8ST X 8 POSITION ST PANEL, PRE-LOADED WITH 8 SIMPLEX ST SM/MM ADAPTERS FPA12SCU X 6 POSITION SC PANEL, PRE-LOADED WITH 6 DUPLEX SC/UPC SM ADAPTERS FPA12SCA X 6 POSITION SC PANEL, PRE-LOADED WITH 6 DUPLEX SC/APC SM ADAPTERS FPA12SCM X 6 POSITION SC PANEL, PRE-LOADED WITH 6 DUPLEX SC MM ADAPTERS FPA12STU X 6 POSITION ST PANEL, PRE-LOADED WITH 6 DUPLEX ST SM ADAPTERS FPA12STM X 6 POSITION ST PANEL, PRE-LOADED WITH 6 DUPLEX ST MM ADAPTERS FPA12LCS X 6 POSITION LC PANEL, PRE-LOADED WITH 6 DUPLEX LC/UPC SM ADAPTERS FPA12LCA X 6 POSITION LC PANEL, PRE-LOADED WITH 6 DUPLEX LC/APC SM ADAPTERS FPA12LCM X 6 POSITION LC PANEL, PRE-LOADED WITH 6 DUPLEX LC MM ADAPTERS FPA12MJS X 6 POSITION MTRJ PANEL, PRE-LOADED WITH 6 DUPLEX MTRJ SM ADAPTERS FPA12MJM X 6 POSITION MTRJ PANEL, PRE-LOADED WITH 6 DUPLEX MTRJ MM ADAPTERS FPA72MPM X 6 POSITION MTP PANEL, PRE-LOADED WITH 6 12F MTP MM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 ST SM/MM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 SC SM/MM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 FC SM/MM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 DUPLEX LC ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 SC/APC SM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 FC/APC SM ADAPTERS FPC PORT MOUNT ANYWHERE PANEL, PRE-LOADED WITH 12 DUPLEX LC/APC ADAPTERS Note: Mount Anywhere Panel and Cable Management accessories LGX Compatable X available on page p indd 79 12/12/07 11:22:41 AM

80 Mating Sleeves/Bulk Head Adapters and Hybrid Adapters Part Number Photo Description Part Number Photo Description FA1SC-ZB Simplex SC Mating Sleeve, Singlemode / Multimode FC-D-B-P2.0 FC/APC Mating Sleeve, Ph. Bronze Insert, D HoleStyle, Singlemode FA2SC-ZB FA1SC-BB Duplex SC Mating Sleeve, Singlemode / Multimode Multimode Simplex SC Mating Sleeve FA2LC-ZB FA2LC-BB Duplex LC Mating Sleeve, Singlemode Duplex LC Mating Sleeve, Multimode Check with or your Fiberdyne Labs Representative for 10GIG OM3 ADAPTERS FA2SC-BB Multimode Duplex SC Mating Sleeve FA1LC-ZB Simplex LC Sleeve, SM/MM FA1SC-GB Simplex SC/APC Mating Sleeve, Singlemode FA1LC-BB Simplex LC Sleeve, Multimode FA2SC-GB Duplex SC/APC Sleeve, Green, SM FAMTP-MM MTP Sleeve MTP is a registered trademark of US Conec, Ltd. FA1ST-PB Simplex ST Mating Sleeve, Threaded, Singlemode/Multimode FA1MJ-MM MTRJ Sleeve, Multimode All trademarks are property of their respective owners. FA2ST-PB Duplex ST Sleeve FA1MJ-SM MTRJ Sleeve, Singlemode 80 FC-D-B- P2.15 FC Mating Sleeve D Hole Style, Singlemode / Multimode FA2ES-MM Part Number Description FL-SCMFCF-SM Fiberdyne Labs Male SC to Female FC, Singlemode FL-STMFCF-SM Fiberdyne Labs Male ST to Female FC, Singlemode FL-FCMSCF-SM Fiberdyne Labs Male FC to Female SC, Singlemode FL-SCMSTF-SM Fiberdyne Labs Male SC to Female ST, Singlemode FL-FCMSTF-SM Fiberdyne Labs Male FC to Female ST, Singlemode FL-STMSCF-SM Fiberdyne Labs Male ST to Female SC, Singlemode FL-SCMFCF-MM Fiberdyne Labs Male SC to Female FC, Multimode FL-STMFCF-MM Fiberdyne Labs Male ST to Female FC, Multimode FL-FCMSCF-MM Fiberdyne Labs Male FC to Female SC, Multimode FL-SCMSTF-MM Fiberdyne Labs Male SC to Female ST, Multimode FL-FCMSTF-MM Fiberdyne Labs Male FC to Female ST, Multimode FL-STMSCF-MM Fiberdyne Labs Male ST to Female SC, Multimode FL-STFSCF-SM Fiberdyne Labs Female ST to Female SC, Singlemode FL-FCFSCF-SM Fiberdyne Labs Female FC to Female SC, Singlemode FL-SCFLCF-ZB Fiberdyne Labs Female SC to Female LC, SM/MM Hybrid Female/Female FL-FCFSCF-MM Fiberdyne Labs Female FC to Female SC, Multimode Adapters FL-STFSCF-MM Fiberdyne Labs Female ST to Female SC, Multimode FL-FCFSCF-MM Fiberdyne Labs 127 Female Business FC to Female Park Drive., SC, Multimode Frankfort, NY FL-STFESF-MM Fiberdyne Labs Female ST to Female ESCON, Multimode Escon Sleeve Hybrid Male/Female Adapters p indd 80 12/12/07 11:23:11 AM

81 12 Port Mount Anywhere Panels Wall Surface 19" Rack (1 U High) Part Number FPC001 FPC002 FPC003 FPC004 FPC005 FPC006 FPC007 Mount Anywhere Panel, Racks, & Assorted Hardware Description ST SM/MM SC SM/MM FC SM/MM LC SM/MM SC/APC FC/APC LC/APC Cable Management Products FDORGE19 3.5" Cable Organizer Horizontal and Verticle FDORMC19 3.5" Cable Organizer Horizontal FDORGE " Cable Organizer Low Density with clips 7 Foot Open Frame Relay Rack PART# FDRAOP19 CTM-018 Holds Fiberdyne Interconnect Panels (3 Singlewide) Holds Coupler Modules Holds Pigtail Modules Bare Bones Facilitation for your Termination Requirements Tethered Dust Cap PART# for 2.5mm ferrules CTM Postition, 4u High Cable Management front, not in back Holds Fiberdyne Interconnect Panels Holds Coupler Modules Holds Pigtail Modules Economical Facilitation for your Termination Requirements Fusion Splice Sleeves Part Number Description FLFPS-060 FLFPS-040 Splice sleeves, 60mm, 50 pack Splice sleeves, 40mm, 50 pack 60mm 40mm Part Number FR-WD2 FR-WD4 Small Reel Large Reel Description Small Reel w/integrated handle. Large Reel w/removable crank handle. Options: Small capacity: FR-WD2 (maximum size 1600 feet of 0.25-inch diameter cable) Large capacity: FR-WD4 (maximum size 5700 feet of 0.25-inch diameter cable) 81 p indd 81 12/12/07 11:24:16 AM

82 Fiberdyne Labs, Inc. Air Flow Cabinet F We Have A Wide Variety of Cabinet Solutions Available. See them online at Introduction: Fiberdyne Lab's Air Flow cabinet Features: 650 Kg Load Capacity Heavy grade construction with casters and floor mounts Mesh front and back doors with locks Mesh Top with cable knockouts Adjustable to 19 inch, 23 inch Multi Fan Capacity Multi Power Strip Capacity Fixed Shelf options Sliding Shef options Keyboard Tray options Removable, lockable side panels Bowed front doors for cable mounting Open bottom for max Air Flow Chased cable routing Grounding studs Front/back door equipment mounting Powder Coat Finish Cisco compatible mounting brackets ANSI/EIA D Completely assembled Modern - aesthetically pleasing fashionable design Benefits: Large vertical foot print for maximum usage on floor space Equipment mount from front or back Easy to move Matte finish, less reflection Powder coat - scratch resistant Pleasant futuristic look for data center Compatible with Cisco equipment Part Number Description F1111 FCAE FCAP FCAG FCAH FCAI FCAJ Part Number Build Matrix F F - A B C D A = Cabinet Height 1. 44u B = Cabinet Width mm C = Cabinet Depth mm D = Cabinet Color 1. Black Note: Contact your sales representative for information on additional cabinet sizes. Fiberdyne 44u Air Flow cabinet 800 mm wide, 900 mm deep, "Black" Cabinet Fan Power Strip Fixed Shelf Sliding Shelves Keyboard Tray Screw Sets (10 Pieces) 82 p indd 82 12/12/07 11:24:51 AM

83 Fiberdyne Labs, Inc. Wallmount Splice Terminator FWT-12T Splice Housing NEW! 100% Compatible with Fiberdyne Labs Air Flow Cabinet Splice Tray Introduction: Fiberdyne Labs, Inc. provides fiber management solutions for your cabling and hardware needs. The Wallmount Splice Terminator mounts easily to most surfaces. Use this Wallmount Splice Enclosure in small utility closets or remote locations. Call your Fiberdyne Sales Representative today for a quotation and specific System Solution Product information. "NEW PRODUCT!" Our 288 Position Wall Mountable Splice Housing Will Be Available Early 2008 Features: Wallmount Holds up to 12 Reduced Trays Optional Key Lock Powder Coat Finish Part Number Description FWT-12T Wallmount Splice Box, 12 Tray Capacity Includes (1) Cable Bracket FST Position Reduced Fusion Splice Tray FST Position Reduced Fusion Splice Tray F12A2 Cable Clamps, 4 Capacity (Additional Cable Bracket Required When Using 3 or 4 Clamps) Cable Bracket Key Lock 83 p indd 83 12/12/07 11:25:07 AM

84 Fiberdyne Labs, Inc. MTP MTP Assemblies Fiberdyne Labs provides MTP fan-out cable assemblies and multi-fiber ribbon MTP -MTP trunk cable & termination Boxes (MTP to SC L, MT-RJ, ST, FC) Solutions Plug & Play! Applications: Data centers Server to server connections Co-locations Storage Area Networks (SAN) Backbone installations High density cross-connect, Disaster recovery and industrial data controls. MTP - High Density The MTP connector is a multi-fiber connector. It contains 12, 24, 36 or 72 fibers within a single ferrule. SC MTP The fiber count density is directly translated into money savings due to the reduced need for optical hardware, and because less telecommunications room real estate is required. As shown by the adapters in the figure, an MTP connector takes up less space on a panel than SC duplex connectors. As customers are now migrating from the SC connector to smaller form factor connectors, the MTP is a great solution for high-density applications. MTP is a trademark of US Conec, Ltd. 84 p indd 84 12/12/07 11:25:27 AM

85 Pre-wired MTP LGX Modules PLUG & PLAY PRE-WIRED SOLUTIONS Part Number Description (Fiberdyne MTP LGX Modules/12 Fiber) FD12SCXXMTP62 Fiberdyne Module, Single Wide, 6 SC Duplex to 1 MTP Backplane, 62.5/125 Multimode FD12MTRJMTP62 Fiberdyne Module, Single Wide, 6 MTRJ to 1 MTP Backplane, 62.5/125 Multimode FD12SCXXMTP50 Fiberdyne Module, Single Wide, 6 SC Duplex to 1 MTP Backplane, 50/125 Multimode FD12MTRJMTP50 Fiberdyne Module, Single Wide, 6 MTRJ to 1 MTP Backplane, 50/125 Multimode FD12LCXXMTP62 Fiberdyne Module, Single Wide, 6 LC Duplex to 1 MTP Backplane, 62.5/125 Multimode FD12LCXXMTP50 Fiberdyne Module, Single Wide, 6 LC Duplex to 1 MTP Backplane, 50/125 Multimode FD12SCXXMTP10G Fiberdyne Module, Single Wide, 6 SC Duplex to 1 MTP Backplane, 50/ Gig Multimode FD12LCXXMTP10G Fiberdyne Module, Single Wide, 6 LC Duplex to 1 MTP Backplane, 50/ Gig Multimode FD12SCXXMTPSM Fiberdyne Module, Single Wide, 6 SC Duplex to 1 MTP Backplane, Singlemode FD12MTRJMTPSM Fiberdyne Module, Single Wide, 6 MTRJ Duplex to 1 MTP Backplane, Singlemode FD12LCXXMTPSM Fiberdyne Module, Single Wide, 6 LC Duplex to 1 MTP Backplane, Singlemode 1U Rack Mount Box 2U Rack Mount Box 3U Rack Mount Box 4U Rack Mount Box MTP CABLE ASSEMBLIES F9C8RB2GCPPXX(MorF) F9C8RB2GCP1XX(MorF) F9C8RB2GCP6XX(MorF) F9C8RB2GCPLXX(MorF) F9C8RQ1GCPPXX(MorF) F9C8RQ1GCP1XX(MorF) F9C8RQ1GCP6XX(MorF) F9C8RQ1GCPLXX(MorF) F9C8RC1GCPPXX(MorF) F9C8RC1GCP1XX(MorF) F9C8RC1GCP6XX(MorF) F9C8RC1GCPLXX(MorF) F9C8RA1GCPPXX(MorF) F9C8RA1GCP1XX(MorF) F9C8RA1GCP6XX(MorF) F9C8RA1GCPLXX(MorF) F9C86B2GCPPXX(MorF) F9C86B2GCP1XX(MorF) F9C86B2GCP6XX(MorF) F9C86B2GCPLXX(MorF) F9C86Q1GCPPXX(MorF) F9C86Q1GCP1XX(MorF) F9C86Q1GCP6XX(MorF) F9C86Q1GCPLXX(MorF) F9C86C1GCPPXX(MorF) F9C86C1GCP1XX(MorF) F9C86C1GCP6XX(MorF) F9C86C1GCPLXX(MorF) F9C86A1GCPPXX(MorF) F9C86A1GCP1XX(MorF) F9C86A1GCP6XX(MorF) F9C86A1GCPLXX(MorF) PLENUM, 62.5/125 MTP -MTP, NO PINS PLENUM, 62.5/125 MTP -ST, NO PINS PLENUM, 62.5/125 MTP -SC, NO PINS PLENUM, 62.5/125 MTP -LC, NO PINS PLENUM, 50/125 OM3 10GIG, MTP -MTP, NO PINS PLENUM, 50/125 OM3 10GIG MTP -ST, NO PINS PLENUM, 50/125 OM3 10GIG MTP -SC, NO PINS PLENUM, 50/125 OM3 10GIG MTP -LC, NO PINS PLENUM, 50/125 STANDARD MTP -MTP, NO PINS PLENUM, 50/125 STANDARD MTP -ST, NO PINS PLENUM, 50/125 STANDARD MTP -SC, NO PINS PLENUM, 50/125 STANDARD MTP -LC, NO PINS PLENUM, SM MTP -MTP, NO PINS PLENUM, SM MTP -ST, NO PINS PLENUM, SM MTP -SC, NO PINS PLENUM, SM MTP -LC, NO PINS RISER, 62.5/125 MTP -MTP, NO PINS RISER, 62.5/125 MTP -ST, NO PINS RISER, 62.5/125 MTP -SC, NO PINS RISER, 62.5/125 MTP -LC, NO PINS RISER, 50/125 OM3 10GIG, MTP -MTP, NO PINS RISER, 50/125 OM3 10GIG MTP -ST, NO PINS RISER, 50/125 OM3 10GIG MTP -SC, NO PINS RISER, 50/125 OM3 10GIG MTP -LC, NO PINS RISER, 50/125 STANDARD MTP -MTP, NO PINS RISER, 50/125 STANDARD MTP -ST, NO PINS RISER, 50/125 STANDARD MTP -SC, NO PINS RISER, 50/125 STANDARD MTP -LC, NO PINS RISER, SM MTP -MTP, NO PINS RISER, SM MTP -ST, NO PINS RISER SM MTP -SC, NO PINS RISER SM MTP -LC, NO PINS (12 Fiber MTP cables listed can be added to the MTP modules listed above!) Fiberdyne Labs 12, 24, 36 and 72 fiber MTP cables are available. Please go to fiberdyne.com for more information or contact your Fiberdyne Labs, Inc. representative. Note: the customer must determine how long of a breakout length they want. If this assembly is used as a harness, the fiber may have to wrap around equipment. Ten feet is about our max for a breakout length. MTP is a trademark of US Conec, Ltd. 85 p indd 85 12/12/07 11:25:52 AM

86 Fiberdyne Labs, Inc. FTTH (Fiber to the Home) Products Purpose: To describe Fiberdyne's "FTTH" distribution enclosure and its configuration options. Conceptual Usage: The FTTH Pedestal is a general-purpose, outdoor enclosure. It is the main node for voice, data and video distribution, in a passive optical network (PON). The pedestal is the network interface -- at the neighborhood. Options, for its internal components, were designed, according to the ITU G standard and according to various, proposed and fielded FTTx requirements. Figure 1: Fiber-to-the-Home Block Diagram, from CO to Pedestal to Home. FTTH-Scheme The pedestal houses two fiber-management functions. One is the relay function. Signals are passed to the other pedestals (i.e. feeder cables are spliced to distribution cables). The other function is distribution. Downstream signals (typically, 1490 nm and 1550 nm) are split, then sent on to the ONTs (Optical Network Terminals). Upstream signals (typically, 1310 nm) are combined, then sent to the CO (Central Office). Additionally, the pedestal houses other components such as splices, attenuators, terminators and miscellaneous fiber-management. Splitters and splices are mounted in the splice trays. A connector panel mount can host 24 fiber connections. Attenuators can be added as necessary. These connector panels can hold terminators for unused fibers. Then, excess fiber can be spooled, and cables can be clamped to the main mount panel, which is removable. Features: Nonmetallic (i.e. high-performance, thermo-plastic) enclosure Complies with Telcordia GR-13 CORE and RUS PE-91 specifications Partially buried, two-piece base for easy installation with cables One-piece, domed cover with flush-mounted latch mechanism Removable, mount panel for splicing and routing in protective shelters (e.g.equipment van) Fiber-optic and cable management devices (e.g. splice trays, clamps, connector panels) attach to mount panel; mix and arrangement is adjustable Options: Self-supporting base with or without integral spade; also includes positions for mounting stakes Environmental splice enclosure for cable relay to other nodes; removable for splicing in protective shelter (e.g. equipment van) Optical Splitters (1x8, 1x16, 1x32) based on planer technology Trays for planer splitters and splices Connector Panel Retainer holds two LGX/Lucent-compatible panels Connector Panels for FC, SC, ST, LC, MT-RJ and MTP Six connectors per panel: FC, SC, ST, MT-RJ, MTP 12 connectors per panel: SC, ST, LC MTP is a registered trademake od US Conec, Ltd. All trademarks are property of their respective owners 86 p indd 86 12/12/07 11:26:16 AM

87 Fiberdyne Labs, Inc. FTTH (Fiber to the Home) Products Environmental Splice Enclosure Inside View Environmental Splice Enclosure Note: underground cable vaults sold separately. NEW! FDL-W200A-24 Aerial/Burial Enclosure Specifications available online! Standard Configuration: One-piece dome lid with integral lock mechanism Mount Panel divided into two functions: Relay and Distribution Relay: splice trunk cables to other trunk cables (i.e. relay to other nodes) Distribution: split signals to drop cables (i.e. distribute to homes) Relay side: Includes "Environmental Splice Enclosure" and shelf Shelf has retainer with two thumb-screws for tool-less maintenance Enclosure slides from shelf for protected splicing (i.e. van or tent) Distribution side: Splice Trays (4 each); one tray contains the optical splitter Fiber-management hubs (4 each) Connector Panel Retainer (1 each) Connector Panels (2 each; must specify connector type and quantity) Cable clamps (2 each) Self-supporting base without spade; mounting stakes can be used 87 p indd 87 12/12/07 11:26:38 AM

88 Fiberdyne Labs, Inc. FTTH (Fiber to the Home) Products Part Number Build Matrix: F F P - X X X - X X X X - X X X X FFP = Fiberdyne Labs "Fiber-to-the-Home" (FTTH) Pedestal Digit # Description Options* 4th - 5th Pedestal Size 12 = 12-inch 6th Base Type 0 = self-supporting, no spade 1 = self-supporting with spade 7th Environmental Splice Enclosure, 0 = none shelf and splice trays 2 = included, with 2 splice trays 3 = included, with 3 splice trays 8th Splice Trays 0 = none (Distribution Side) or indicate 1,2,3 or 4 for tray quantity Pedestal Enclosure 9th - 10th Optical Splitter 00 = none (requires one splice tray) 08 = 1 x 8 16 = 1 x = 1 x 32 11th Fiber Management 0 = none 4 = four hubs 12th Cable Clamps 0 = none 2 = two (7/16-inch min. diameter) 4 = four (7/16-inch min. diameter) 13th Connector Panels 0 = none 1 = retainer and one connector panel 2 = retainer and two connector panels 14th Connector Type/Quantity 0 = none (for connector panels) 1 = FC (6 per panel) Note: polish is UPC 2 = LC (12 per panel) 3 = SC (6 per panel) 4 = SC (12 per panel) 5 = ST (6 per panel) 6 = ST (12 per panel) 7 = MT-RJ (6 per panel) 8 = MTP (6 per panel) Pedestal Enclosure *Note: for custom configurations, "Special Instructions" must be used. For example: if two connector panels are required, each with different connector types, put an "X" in the 13th digit. Then, add the following to the order description: "Special Instructions (12th digit): one connector panel with SC, the other with FC." Example: "Standard Pedestal" - Fiberdyne FTTH Pedestal - 12-inch, self-supporting base, no spade - Environmental Splice Enclosure with 2 splice trays - 4 Distribution-side splice trays; one with 1x32 optical splitter - 2 connector panels, each with six (6) SC/UPC adapters - 4 fiber-management hubs and 2 cable clamps Part # FFP Please call your sales representative for more information and pricing. Specifications available online: Pedestal Enclosure - Isometric Drawing - Colorized Pedestal Enclosure - Isometric Drawing - Black & White 88 MTP is a registered trademark of US Conec, Ltd. p indd 88 12/12/07 11:26:58 AM

89 FTTH Pedestal - Isometric FTTH Pedestal - Isometric 89 p indd 89 12/12/07 11:27:24 AM

90 Testing Capabilities and Quality Statement About Fiberdyne Labs, Inc. Fiberdyne Labs Inc. takes pride in being a supplier to many Fortune 1000 Companies, Telecommunications Companies, Data Communications Companies, Federal, State and Local Governments, large, small business, and international customers. Fiberdyne offers the highest quality, tested and inspected products available in the industry. Take a look at some of the equipment we use everyday in our facility. Interferometer tests: Measuring the following Ferrule Attributes: Fiber Protrudence (Spherical Height) Fiber Offset; Linear or Angular Radius of Curvature 4 Spectrum Analyzer: Measuring full optical bandwidth from 600nm to 1700nm 4 Back Reflection Meters: Measuring the amount of light reflected back at the source (Return Loss) 4 Light Sources and Power meters: Measuring Insertion Loss Note: Fiberdyne Labs, Inc light sources and power meters are available for sale on pages Other Tests Include: OTDR Testing for Singlemode and Multimode, Visual Inspection, Pull Testing, Polarization Testing, Quality Control and Inspection. Note: not all testing procedures are applicable to all Fiberdyne Labs products. FIBERDYNE LABS QUALITY POLICY: Fiberdyne Labs is totally committed to complete internal and external customer satisfaction, and to continuous improvement in all facets of our business. As a team, we are dedicated to conforming to all known requirements and providing on-time defectfree products to our customers. Fiber Characterization Test: Optical Return Loss (ORL) readings at 1550 nm Bi-directional loss readings at 1550 nm and 1625 nm Bi-directional OTDR readings at 1550 nm and 1625 nm Polarization Mode Dispersion (PMD) readings at 1550 nm Chromatic Dispersion readings from 1520 nm to 1620 nm increments. More info. online at We offer Nationwide FC testing service. Contact your Fiberdyne Labs representative today! 90 p indd 90 12/12/07 11:28:06 AM

91 Technical Information dbm to MilliWatt Conversion Table Power MilliWatts Power MilliWatts Power MilliWatts (dbm) (dbm) (dbm) (dbm) Watt Watts Watts Watts Watts TIA-598-A Fiber Optic Cable Standard Color Code 1 Blue 7 Red 2 Orange 8 Black 3 Green 9 Yellow 4 Brown 10 Violet 5 Slate 11 Rose 6 White 12 Aqua 13 fibers and higher the color code is repeated every 12 and the buffered fibers or subcables are striped once every additional 12 according to the TIA-598-A specifications. Temperature Conversions Conversion Formula: C x 1.8 plus 32 equals... F F equals... C Celsius Fahrenheit Celsius Fahrenheit Metric Conversion To Convert From To Multiply By Area Circular Mils Square Inches Circular Mils Square Mils.7854 Circular Mils Square Milimeters Square Centimeters Square Inches.155 Square Feet Square Meters.0929 Square Inches Circular Mils Square Inches Square Centimeters Square Inches Square Mils Square Meters Square Feet Square Milimeters Square Inches Square Milimeters Circular Mils.1974 Square Mils Circular Mils Square Mils Square Inches Length Centimeters Inches.3937 Centimeters Feet Feet Centimeters Feet Meters.3048 Inches Centimeters 2.54 Inches Meters.0254 Inches Milimeters 25.4 Inches Mils Kilometers Miles Meters Feet Meters Inches Meters Yards Miles Kilometers Millimeters Inches Millimeters Mils Mils Inches.001 Mils Milimeters Yards Meters Miscellaneous Kilograms Pounds Kilograms per Kilometers Pounds per 1000 Feet hms per Kilometer 0hms per 1000 Feet hms per 1000 Feet 0hms per Kilometer hms per 1000 Yards 0hms per Kilometer Picofarads per Foot Picofarads per Meter Pounds Kilograms Pounds per 1000 Feet Kilograms per Kilometer Pounds per 1000 Yards Kilograms per Kilometer Diam. Circle Circumference Circle Diam. Circle Side of Equal Squares.8862 Diam. Sphere-Cubed Volume of Sphere.5236 U.S. Gallons Imperial Gallons (British).8327 U.S. Gallons Cubic Feet.1337 U.S. Gallons Pounds of Water (20 C) 8.33 Cubic Feet Pounds of Water (4 C) Feet of Water (4 C) Pounds per Square Inch.4336 Inches of Mercury (0 C) Pounds per Square Inch.4912 Knots Miles per Hour See Page 21 for ITU Grid C-Band, 100 GHz Spacing. 91 p indd 91 12/12/07 11:28:21 AM

92 Fiberdyne Labs, Inc. Cleaning Kits & Supplies F Cletop Reel Type A 2.5mm Cleaner Stick Package of 50 6 Replacement Reel for Type A mm Cleaner Stick Package of 50 7 Kim Wipes 9 Compressed Air 8 92 Optic Prep Wipes Package of 50 Note: Any part can be purchased separately. Inspection Scope Description Fiberdyne P/N Kit Part Numbers Cletop FL-CCK-1 FL-CCK-2 FL-CCK-3 FL-CCK-4 FL-CCK-5 S-Cassette Type A FCC-SAB Reel Type A (Image 1) FCC-02R MPO Reel FCC-04R MTRJ Reel FCC-05R Cletop Replacement Reel/Cassette S Cassette Type A FCC-S Reel Type A (Image 2) FCC-R MPO Reel FCC-W MTRJ Reel FCC-W Adapter Cleaner Sticks 2.5mm (Qty 50) (Image 3) ACT mm (Qty 50) (Image 4) ACT Bulk Cleaning Supplies Kim Wipes (Image 5) Canned Air (Image 6) Optic Prep Wipes (Image 7) CP Inspection Scope 200x (Image 8) OFS C mm Adapter Cap (Included) *1.25mm Adapter Cap (200x) x OFS C 2.5mm Adapter Cap (Included) *1.25mm Adapter Cap (400x) Carrying Case Large (Image 9) FD Small FD Total Kit Sell Price Call for Quote * Note: 1.25mm Adapter Cap Sold 127 Separately Business Park Drive., Frankfort, NY Large Case with supplies p indd 92 12/12/07 11:28:50 AM

93 Fiberdyne Labs, Inc. Pulse Suppression Box FIBERDYNE LABS, INC. HIGH USAGE OTDR PULSE SUPPRESSION BOX This box is designed to facilitate fast replacement of pigtail fiber optic cable assemblies which quickly wear out from high usage. SINGLEMODE & MULTIMODE CONFIGURATIONS RUGGED DESIGN ALL CONNECTOR TYPES ARE AVAILABLE MANUFACTURER DIRECT SAVINGS CUSTOM APPLICATION AVAILABLE WITH SPECIFIED SPLICE POINTS ETC. MINIATURE OTDR PULSE SUPPRESSION BOX MODULE CALL FOR PRICING Part Number Description Singlemode Pulse Suppression Box, ST Connectors, 500 Meters Singlemode Pulse Suppression Box, FC Connectors, 500 Meters Singlemode Pulse Suppression Box, SC Connectors, 500 Meters Singlemode Pulse Suppression Box, FC/APC Connectors, 500 Meters Singlemode Pulse Suppression Box, SC/APC Connectors, 500 Meters Singlemode Pulse Suppression Box, ST Connectors, 1100 Meters Singlemode Pulse Suppression Box, FC Connectors, 1100 Meters Singlemode Pulse Suppression Box, SC Connectors, 1100 Meters Singlemode Pulse Suppression Box, FC/APC Connectors, 1100 Meters Singlemode Pulse Suppression Box, SC/APC Connectors, 1100 Meters Multimode Pulse Suppression Box, ST Connectors, 500 Meters Multimode Pulse Suppression Box, FC Connectors, 500 Meters Multimode Pulse Suppression Box, SC Connectors, 500 Meters Call For Custom Lengths and Configurations 93 p indd 93 12/12/07 11:29:09 AM

94 Fiberdyne Labs, Inc. Visual Fault Locator (VFL) Fiberdyne Labs Visual Fault Locator Item No. FD-VFL-1A Introduction: The Fiberdyne Labs FD-VFL-1A is a streamlined universal Visual Fault Locator (VFL). The pencil style VFL features a universal adapter which accepts any optical connector style with a 2.5mm ferrule. It operates on a single 1.5 Volt AA alkaline battery to keep the overall size to a minimum while providing long battery life. Output is from a powerful 1mW laser at 650nm to provide visibility beyond 5 kilometers. Unlike many other VFLs today, the FD-VFL-1A features a choice of continuous or modulated output and a low battery indicator to alert the user when it is time to change batteries. The universal connector eliminates the inconvenience of having to use a patch cable for direct connection to the fiber under test if connector styles are dissimilar. This single basic tool is one that all installers, and maintenance personnel should have in their tool kit. It is the most economical test tool for quickly verifying continuity, checking the validity of patch cables before or after installation, test and find breaks in LANs, verifying short lengths of installed fiber, or looking for cracked fiber in splice cases, bad connectors, tight crimps in fiber cable, backbone breaks or anywhere light continuity needs checking. Features: Low Cost and Streamlined: The FD-VFL-1A is a low cost, streamlined basic fiber test tool which is easy to handle and easy to store. LED Indicators: The FD-VFL-1A provides LED indicators for active Laser mode (continuous or modulated), and Low Battery. Singlemode and Multimode Operation: Find breaks, bad splices, tight crimps, poor components, and bad connections. Single AA Battery: The FD-VFL-1A uses one AA Alkaline battery for convenience. Optical Output Port: The FD-VFL-1A features a universal adapter which can accept any 2.5mm ferrule such as ST, SC, FC and E2000. Pocket Clip: The FD-VFL-1A comes with a handy pocket clip for easy storage.- Specifications: Fiberdyne Labs Visual Fault Locators Source: Class II Laser Diode Central Wavelength: 650 +/- 25 C Item No. Description Price Output Power: > C into SMF-28 Fiber FD-VFL-1A Visual Fault Locator, Call for Quote Spectral Width: < 5nm Pen Light Size, 650nm Transmission: Continuous or 1Hz pulsed signal Range: Visible beyond 5 km Power: Single replaceable 1.5V AA Alkaline Battery Environmental: Operating Temperature: -10 to +50 C Storage Temperature: -20 to +80 C Humidity: 0 to 95% (non-condensing) Physical: Length: 6.2 in 157 mm More information Approx. Diameter: 0.63 in 1.8 mm available online Approx. Weight: 2.36 oz 67 grams including Connector Style: Universal Adapter expanded view (Will accept any connector with a 2.5mm ferrule) product photos 94 p indd 94 12/12/07 11:29:23 AM

95 Fiberdyne Labs, Hand Held Optical Fiber Identifiers Description: Fiberdyne Lab's Hand Held Optical Fiber Identifier, Model FL-OFI-X, is a rugged, easy to use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a singlemode fiber. By utilizing local detection technology (non-destructive macro-bend detection), the FL-OFI-X eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service. Signals detected by the Model FL-OFI-X include continuous wave, live optical transmission, and low frequency modulated tones at 270, 1000, and 2000 Hz. When traffic is present on the fiber tested, the direction of transmission is indicated by LEDs illuminating the probe. When modulated tones are present on the fiber under test, the FL-OFI-X will detect and illuminate the corresponding LED for 270 Hz, 1000 Hz, or 2000 Hz. The FL-OFI-X has the widest environmental operating range of any optical fiber identifier on the market today. Fiberdyne Labs FL-OFI-1, Fiber Identifier Features: Hand Held, Lightweight, Rugged, Easy to Use, Battery Powered +20 dbm to -40 dbm core power detection. Operated with one hand. Interchangeable adapter heads for jacketed, coated, or ribbon fiber. Weighs less than 7.6 oz. Complete with carrying case. Attaches to a belt or tool pouch. Uses a 9 volt battery. Live Fiber Identifier Operates from 800nm to 1700nm. Compatible with most singlemode optical fiber. Uses non-destructive macro bend detection technology. Easy to Use Bi-directional traffic indication. High intensity LED indication of active signal transmission. Detects presence of 270 Hz, 1000 Hz, and 2000 Hz. modulated tones. Low battery indication. Self test on power-up. Using the Fiberdyne Labs FL-OFI-X in conjunction with Fiberdyne Labs Laser/LED sources outlined below offers optimum fiber optic identification capability. Description Wavelength Core Power Detect Presence of CW Signal Tone Detection FL-OFI-1 FL-OFI-2 850nm to 1700nm 0 to -40dBm +20 to -20dBm X X 270 Hz 1 KHz 2 KHz Part Number Description Price FL-OFI-1 Advanced Hand Held Optical Call for Quote Fiber Identifier Probe FL-OFI-2 CATV Hand Held Optical Call for Quote Fiber Identifier Probe FD Optical 2mm Adapter Call for Quote 95 p indd 95 12/12/07 11:29:38 AM

96 Model FD-FS8513A Model FD-FS1316 Fiberdyne Labs LED & LASER Optical Light Sources Introduction: The FD-FS Series of Optical Light Sources are hand-held, battery-powered, stabilized sources for fiber-optic testing. Conceptual Usage: Together with any Fiberdyne Labs' power meters, this team makes the perfect combination for accurately testing multimode or short-haul single-mode optical fiber systems, cable attenuation, and point-to-point connection verification. Note: The multimode model, FD-FS8513A, operates at 850/1300nm. The single-mode model, FD-FS1316, operates at 1310/1550nm. Features: Low Power Consumption: Each source will operate for more than 20 hours on just two AA batteries. All units include a "Low batt" indicator to monitor the state of its AA batteries. CW, and 2 - KHz Modulation: Users can easily select between continuous wave (CW) or 2 - KHz modulation with the push of a single key. Stable Power: Each unit is factory set to launch at -20dBm with excellent stability over time. Single Key Operation: Ease of operation is provided for by single key entry for wavelength selection, and CW or 2 - KHz modulated frequency. Options: 850/1300 nm, Multimode, LED: FD-FS 8513a Series 1310/1550 nm, Single-mode, LASER: FD-FS 1316 Series Specifications: Technical Data Sheet Available Online! Fiberdyne Labs Model FD-FS1316 Single Port, Dual Wavelength, 1310nm & 1550nm, Optical LASER Sources (Recommended for Single-mode Applications) Item No. Connector(s) Charger Included Price FD-FS ST No Call for Quote FD-FS ST Yes Call for Quote FD-FS FC No Call for Quote FD-FS FC Yes Call for Quote FD-FS SC No Call for Quote FD-FS SC Yes Call for Quote Fiberdyne Labs Model FD-FS8513-A Dual Port, Dual Wavelength, LED Light Sources 850nm, & 1300nm, (Recommended for Multimode Applications) Item No. Connector Charger Included Price FD-FS ST No Call for Quote FD-FS ST Yes Call for Quote FD-FS FC No Call for Quote FD-FS FC Yes Call for Quote FD-FS SC No Call for Quote FD-FS SC Yes Call for Quote 96 p indd 96 12/12/07 11:29:52 AM

97 Fiberdyne Labs LED & LASER Power Meters Introduction: The FD-FM Series Meters are hand held, compact, lightweight and easy to use battery powered optical power meters. Together with any of Fiberdyne's Light Sources, this team makes a perfect combination for accurately testing multimode and singlemode optical fiber systems. Model FD-FM8515B Models FD-FM8515-B/C, and FD-FM8520 offer measurements in dbm, dbr, and micro watts (milli-watts for FD-FM8515-C). Models FD-FM8515-B and FD-FM8520 measure optical power from +5 dbm to -70 dbm with calibrated wavelengths of 850, 1310, and 1550nm making these units ideal for general singlemode and multimode fiber optic testing. Model FD-FM8520 Power Meters Model FD-FM8515-C (High Power) measures optical power from +23 dbm to -50 dbm with calibrated wavelengths of 850, 1310, and 1550nm making these units ideal for measurements on CATV systems, optical amplifiers, and other high power devices. Features: Specifications: Multiple Wavelengths Technical Data Sheet Available Online! Low Power Consumption Time and cost savings: one meter - multiple wavelengths. Single Key Operation Wide dynamic range Multimode and singlemode applications. Two Way Power - AA Alkaline batteries, or optional rechargeable NiCad batteries Two AA Alkaline batteries provide 100 hours of use. Adapter Caps Fiberdyne Labs Model FD-FM8515B Optical Power Meter 850nm, 1310nm, 1550nm, InGaAs, Reference Store, dbm, dbr, µw Item No. Charger Price FD-FM No Call for Quote FD-FM Yes Call for Quote Note: An adapter cap is required. They are listed and purchased separately. Fiberdyne Labs Model FD-FM8515C Optical High Power Fiber Meter 850nm, 1310nm, 1550nm, InGaAs, Reference Store, dbm, dbr, mw Item No. Charger Price FD-FM No Call for Quote FD-FM Yes Call for Quote Note: An adapter cap is required. They are listed and purchased separately. Fiberdyne Labs Model FD-FM8520 Optical Power Meter Computer/Printer Interface, Reference Store, dbm, dbr, µw 850nm, 1310nm, 1550nm, InGaAs Item No. Charger Price FD-FM No Call for Quote FD-FM Yes Call for Quote Note: An adapter cap is required. They are listed and purchased separately. Fiberdyne Labs Adapter Caps for FD-FM8515-B, & FD-FM8520 Power Meters Item No. Connector FL-AC-1 *Universal FL-AC-2 ST FL-AC-3 SC FL-AC-4 FC FL-AC-5 SMA FL-AC-6 Biconic FL-AC-7 LC Note: Fits any connector with 2.5mm Ferrule Fiberdyne Labs Adapter Caps for FD-FM8515C High-power Meter Item No. Connector FL-AC-1 *Universal FL-AC-2C ST FL-AC-3C SC FL-AC-4C FC FL-AC-5C SMA FL-AC-6C Biconic FL-AC-7C LC 97 p indd 97 12/12/07 11:30:05 AM

98 Fiberdyne Labs 10 BASE Ethernet Products Standalone Products Ethernet 10Base-T to 10Base-FL Multimode Converters FTX-R61 Ethernet 10Base-T to 10Base-FL Converter, Standalone, SC FTX-R62 Ethernet 10Base-T to 10Base-FL Converter, Wallmount, SC FTX-R11 Ethernet 10Base-T to 10Base-FL Converter, Standalone, ST FTX-R11-LA Link Advisor FTX-R11 FTX-R12 Ethernet 10Base-T to 10Base-FL Converter, Wallmount, ST Ethernet 10Base-T to 10Base-FL Singlemode Converters FTX-R11-SM Ethernet 10Base-T to 10Base-FL Singlemode Converter, SC FTX-R12-SM Ethernet 10Base-T to 10Base-FL Converter, Wallmount Ethernet 10Base-FL to 10Base-FL Singlemode Converters FTX-D11 Ethernet 10Base-FL MM-10Base-FL SM Converter, Standalone ST FTX-D12 Ethernet 10Base-FL MM-10Base-FL SM Converter, Standalone, SC/ST Ethernet 10Base-FL to 10Base-FL Multimode Repeater FTX-C61 Ethernet 10Base-FL -10Base-FL Repeater Multimode, Standalone SC FTX-C62 Ethernet 10Base-FL -10Base-FL Repeater Multimode, Standalone, ST FTX-C63 Ethernet 10Base-FL -10Base-FL Repeater Multimode,Standalone, ST/SC Ethernet 10Base-FL Singlemode Repeater FTX-E11 Ethernet 10Base-FL -10Base-FL Repeater, Singlemode, Standalone ST Note: Power Supplies provided with all 10 BASE media converters and repeaters. See for online shopping. AUI Transceivers Ethernet AUI Transceivers Fiber FTX-A11 AUI to 10Base-FL transceiver, Standalone, ST FTX-A12 AUI to 10Base-Fl Transceiver, Wallmount, ST FTX-A13 EXTENDED BODY AUI TO 10 BASE-FL, ST Ethernet AUI to 10Base-FL Singlemode Transceiver FTX-A11-SM Ethernet AUI-10Base-FL Singlemode Transceiver Ethernet AUI Transceivers RJ45 FTX-B20 AUI to 10Base-T Transceiver, Full Function, Standalone FTX-B21 AUI to 10Base-T Transceiver, Full Function, Wallmount FTX-B22 EXTENDED BODY AUI TO 10 BASE-T 98 p indd 98 12/12/07 11:30:41 AM

99 Fiberdyne Labs, Inc. 100 Base Converters Status Indicators: Power- Media Converter is powered on. Fiber Link- Valid link on Fiber Receive Port Fiber Receive- Valid data received on Fiber Port TP Link- Valid link pulses received on Twisted Pair interface TP Receive- Valid data received on Twisted Pair interface Full Duplex- Converter has auto-negotiated Full Duplex on Twisted Pair Media Converters and Repeaters are available in three (3) package types: Standalone Package size: 4.2 W x 2.7 D x 0.8 H (107 mm W x 67 mm D x 20 mm H) Includes power converter (e.g. 120 VAC to 5 VDC) Wallmount Standalone unit with a mounting plate, which includes four screw holes Mounting plate size: 5 W x 4 H x 0.05 thick (127 mm W x 102 mm H x 1.3 mm thick) Rackmount Rackcards for Fiberdyne's Ethernet Rackmount Chassis Rack Mountable Converter Power and rackmount provided by chassis 100BASE TO 100BASE CONVERTERS & REPEATERS Specifications: Complies with IEEE Base-FX and 100Base-TX standards Multimode Product: Full-Duplex distances to 2km Singlemode Product: Full Duplex to 15km Extended Distance Singlemode Product: Full Duplex to 40km Auto MDI/MDIX ; No crossover cable required Auto negotiation on Twisted Pair Six Status indicators 5VDC, 1.2A (Power Pack Included) Duplexing/ Auto Neg This device operates as an auto-negotiating device. The twisted pair interface indicates 100Base-TX, full-duplex capable. Part Number FTX-R73 FTX-B73 FTX-D73 FTX-E73 FTX-R73-SM FTX-B73-SM FTX-D73-SM FTX-E73-SM FTX-R73-SM40K FTX-B73-SM40K FTX-E73-SM40K FTX-D15 FTX-D61 FTX-D65 FTX-D66 FTX-C11 FTX-D63 FTX-C15 FTX-C65 Description ETHERNET 100BASE-TX TO 100BASE-FX, MM, STANDALONE, SC ETHERNET 100BASE-TX TO 100BASE-FX, MM, STANDALONE, ST ETHERNET 100BASE-TX TO 100BASE-FX, MM, STANDALONE, MTRJ ETHERNET 100BASE-TX TO 100BASE-FX, MM, STANDALONE, LC ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, SC ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, ST ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, MTRJ ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, LC ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, SC, 40 KM ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, ST, 40 KM ETHERNET 100BASE-TX TO 100BASE-FX, SM, STANDALONE, LC, 40 KM ETHERNET 100BASE-FX MM TO 100BASE-FX SM, STANDALONE, SC/ST ETHERNET 100BASE-FX MM TO 100BASE-FX SM, STANDALONE, SC ETHERNET 100BASE-FX MM TO 100BASE-FX SM, STANDALONE, ST/SC ETHERNET 100BASE-FX MM TO 100BASE-FX SM, STANDALONE, ST/ST ETHERNET 100BASE-FX MM TO 100BASE-FX MM, STANDALONE, ST ETHERNET 100BASE-FX MM TO 100BASE-FX MM, STANDALONE, SC ETHERNET 100BASE-FX SM TO 100BASE-FX SM, STANDALONE, ST ETHERNET 100BASE-FX SM TO 100BASE-FX SM, STANDALONE, SC 99 p indd 99 12/12/07 11:30:55 AM

100 Fiberdyne Labs, Inc. 10/100TX to 100FX Switch/Converter Fiber/T Converter Introduction: The new Fiberdyne Labs FHC-0110 Series 10/100TX to 100FX Media Converter provides one TX (copper) port and one FX (fiber) port. The full duplex FX port is available in multimode or singlemode with a choice of either ST or SC connectors. The TX port uses a standard RJ-45 connector which automatically senses the speed and auto-adjusts to either 10 Mbps or 100 Mbps. Features: 10/100Mbps TX port with RJ-45 Connectors (10/100Base-T). TX port automatically senses the speed and auto-adjusts to either 10 Mbps or 100 Mbps FX port can be ordered with ST or SC connector pair - Multimode: Supports both 62/125um and 50/125um fiber Singlemode: Supports 9 or 10/125um FX port multimode supports links up to 2km; Singlemode supports links up to 20km. Supports Auto Uplink on TX port and LFPT (Link-Fault-Pass Through) Auto-Uplink: User can connect to a PC or Switch/Hub by using either a straight-through or cross-over cable. The FHC-0110 will automatically detect the type of cable and make the connection link, MDI-X Link Fault Pass-Through: When a cable on one end is broken or disconnected, it will automatically inform the other end. The remote end's link LED will indicate the fault/ disconnect. Power: U.S. and International Power Supplies Available Indicator State Meaning POW Steady On Power is On FEF Steady On Active when local FX port receives signal from remote port Off NO Reception SPD Steady On TP data transmission speed is 100 mbps Off TP data transmission speed is 10 mbps FX Link/Act Steady On Active when fiber cable (FX) connection with remote device is good Off Denotes Fiber Optic Link Activity TX Link/Act Steady On Active when copper (TX) connection with remote device is good Off Denotes TX Link Activity FDX Steady On Connection in Full-duplex Mode Off Connection in Half-duplex Mode Part Number Copper Interface Port Fiber TX/RX Ports Fiber Distance FHC M02-ST 10/100 RJ-45 Multimode Interface with ST Connectors 2km for both TX & RX ports FHC M02-SC 10/100 RJ-45 for both TX & RX ports Multimode Interface with SC Connectors 2km FHC S20-SC 10/100 RJ-45 for both TX & RX ports Single-mode Interface with SC Connectors 20km 100 p indd /12/07 11:31:16 AM

101 Fiberdyne Labs, Inc. SFP Gigabit Converter Standalone Example: FTX-250S-TS SFP Gigabit Media Converter Part Number Build Matrix FTX (Config) (Link A) (Link B) (Optional - CWDM) Config: R = Rackmount (card for Rackmount Chassis) S = Standalone (box with External Power Supply) W = Wall-mount (box with External Power Supply) Link A or Link B: T = 1000Base-T, RJ-45 S = 1000Base-SX, 850-nm, MM, LC L = 1000Base-LX, 1310-nm, MM/SM, LC Z = 1000Base, 1550-nm, SM, LC C = 1000Base, CWDM, SM, LC B = 1000Base-BX, Distance 100 M 275m/62.5µm Fiber, 550m/50.0µm Fiber 10km/8.3µm Fiber, 550m/62.5µm Fiber w/mode Conditioning, 550m/50µm Fiber w/mode Conditioning 80km 50km 10km Minimum (11dB Power Budget) 1310/1490 (See below for additonal info.) Specifies a single fiber bi-directional link kit that includes two FTX-250's. Port A on each FTX-250 includes, as specified, a T, S, L, Z, or C SFP. Port B on one FTX-250 is fitted with a 1310/1490 SFP and the other FTX-250 is fitted with a complimentary 1490/1310 SFP. NOTE: MM = Multimode, SM = Singlemode Optional - CWDM Wavelength (required, if Link is "C"): Coarse Wavelength Division Multiplexing (CWDM) Grid Table of Commonly used CWDM Wavelengths Center Wavelengths ** Cisco "Colors" Wavelength"Codes"*** 1470 Gray Violet Blue Green Yellow Orange Red Brown 61 Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths. These codes are the middle digit of the wavelength not "channel numbers". Cisco is a registered trademark of Cisco Systems,Inc. Gigabit Converter, Standalone, 1000Base-T to 1000Base-SX (850-nm), LC connectors Distance limitations apply. See page 113 for 1000Base-SX to 1000Base, CWDM (1470-nm), LC connectors Ethernet distance limitations. FTX-250R-SC-1470 Gigabit Converter, Rackmount, Fiberdyne Labs Standalone SFP Gigabit Media Converter SFP GIGABIT MEDIA CONVERTERS Part Number Description FTX-250S-TT LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-T RJ45 FTX-250S-TS LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-SX MM LC FTX-250S-TL LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-LX MM/SM LC FTX-250S-TZ LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-1550nm SM LC FTX-250S-TC-XXXX LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-CWDM SM LC FTX-250S-SS LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-SX MM LC FTX-250S-SL LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-LX MM/SM LC FTX-250S-SZ LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-1550nm SM LC FTX-250S-SC-XXXX LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-CWDM SM LC FTX-250S-LL LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-LX MM/SM LC FTX-250S-LZ LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-1550nm SM LC FTX-250S-LC-XXXX LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-CWDM SM LC FTX-250S-ZZ LINK A SFP 1000BASE-1550nm SM LC, LINK B SFP 1000BASE-1550nm SM LC FTX-250S-ZC-XXXX LINK A SFP 1000BASE-1550nm SM LC, LINK B SFP 1000BASE-CWDM SM LC FTX-250R-ZC-XXXX LINK A SFP 1000BASE-1550nm SM LC, LINK B SFP 1000BASE-CWDM SM LC SMALL FORM-FACTOR PUGGABLE (SFP) GIGABIT ETHERNET TRANSCEIVER FGE-SFP-T 1000BASE-TX, RJ45 FGE-SFP-S 1000Base-SX, 850-nm, Multimode, LC FGE-SFP-L 1000Base-LX, 1310-nm, Multimode/Single-mode, LC FGE-SFP-Z 1000Base-ZX, 1550-nm, Single-mode, LC FGE-SFP-C Base, CWDM, Single-mode, LC, 1470 FGE-SFP-C Base, CWDM, Single-mode, LC, 1490 FGE-SFP-C Base, CWDM, Single-mode, LC, 1510 FGE-SFP-C Base, CWDM, Single-mode, LC, 1530 FGE-SFP-C Base, CWDM, Single-mode, LC, 1550 FGE-SFP-C Base, CWDM, Single-mode, LC, 1570 FGE-SFP-C Base, CWDM, Single-mode, LC, 1590 FGE-SFP-C Base, CWDM, Single-mode, LC, 1610 Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. 101 p indd /12/07 11:31:35 AM

102 Fiberdyne Labs, Inc. Ethernet Chassis Ethernet Chasis Purpose: To describe Fiberdyne's rack-mount chassis, which hosts the rack-card version of Fiberdyne's media converters and repeaters. Conceptual Usage: Each rack-mount chassis can hold 20 Ethernet rack-cards. These cards are media converters or repeaters, and they are hot-swappable. They support 10Base (Ethernet), 100Base (Fast Ethernet) and 1000Base (Gigabit Ethernet) data links. Typically, a chassis is used at a central location, where fiber links are aggregated. Then, standalone converters/repeaters are used at remote locations. The chassis can host one or two power-supply modules. When two modules are loaded, they serve as redundant power supplies Each module can support the power requirements of an entire fully loaded chassis. The power-supply modules are field-replaceable and hot-swappable. Features: Hosts multiple types of Ethernet Converter/Repeater rack-cards Media Converters: 10Base, 100Base, 1000Base Repeaters: 10Base-FL, 1000Base-T/SX/LX/ZX/CWDM Hot-swappable Converter/Repeater rack-cards Redundant, hot-swappable, Power-Supply modules available Status LEDs on System Power monitor panel: Power Main and Power Aux Color Black Standard Configurations: Rack-mountable 19-inch or 23-inch rack frames; reversible mount tabs System Power monitor module Two (2) power-module slots on rear of chassis 20 converter/repeater rack-card slots on front of chassis Options : Redundant, power-supply modules: 120/240 VAC and 48 VDC Media Converter and Repeater rack-cards (sold separately, but the chassis can be shipped fully loaded) Part Number Build Matrix: Chassis Shown Filled With Modules F R X X X X X X X X F R 0 0 FR = Fiberdyne Labs Rack-mount electronics Digit # Description Options * 3rd & 4th Package EC = Ethernet Chassis PS = Power Supply module for chassis ** 5th & 6th Reserved 00 = reserved 7th & 8th Main Power Supply 00 = none 12 = 120/240 VAC, 50/60 Hz 48 = 48 VDC 9th & 10th Auxiliary Power Supply ***00 = none 12 = 120/240 VAC, 50/60 Hz 48 = 48 VDC Notes: * Add Special Instructions for custom configurations. For example: if the chassis will be shipped with 10 FTX-250R-SL rack-cards, then list: Special Instructions: install 10 FTX-250R- SL rack-cards before shipping. ** If ordering a separate, redundant, power-supply module (e.g. spare), then specify the type in digits 7 & 8 and 00 in digits 9 & 10 (e.g. 120/240-VAC, power-supply module has part number, FRPS ). *** If this option is selected, this is the redundant power supply. Part Number FREC FREC FREC FRPS FRPS F1XXXXXR13 Description Ethernet Chassis with (1) 120/240 VAC Module Ethernet Chassis with (2) 120/240 VAC Module 19" RACK MT 20 SLOT CHASSIS W/48VDC POWER SUPPLY 120/220 VAC 50/60Hz REDUNDANT POWER SUPPLY 48VDC REDUNDANT POWER SUPPLY OPTION BLANK FILLER PANEL 102 Part Number F1X0000R13 F1X0000R13-LA F1X0001R13 F1X0004R13 F1X0009R13 F1X0006R13 F1X0007R13 F1X0008R13 F1X0011R13 Description 10BASE-T TO 10BASE-FL, MM, RACKMOUNT, ST 10BASE-T TO 10BASE-FL, MM, RACKMOUNT, ST, LINK ALERT 10BASE-T TO 10BASE-FL, MM, RACKMOUNT, SC 10BASE-T TO 10BASE-FL, SM, RACKMOUNT, ST 10BASE-FL MM TO 10BASE-FL SM, RACKMOUNT ST 10BASE-FL MM TO 10BASE-FL MM, RACKMOUNT, SC 10BASE-FL MM TO 10BASE-FL MM, RACKMOUNT, ST 10BASE-FL MM TO 10BASE-FL MM, RACKMOUNT, ST/SC 10BASE-FL SM TO 10BASE-FL SM, RACKMOUNT, ST p indd /12/07 11:31:49 AM

103 Fiberdyne Labs, Inc. Ethernet Chassis Part Number F1X0002R23 F1X0003R23 F1X0111R23 F1X4402R23 F1X0005R23 F1X0013R23 F1X0024R23 F1X0014R23 F1X0122R23 F1X5513R23 F1X6614R23 F1X0022R13 F1X0023R13 F1X0019R13 F1X0020R13 F1X0021R13 Description 100BASE-TX TO 100BASE-FX MM, RACKMOUNT, ST 100BASE-TX TO 100BASE-FX MM, RACKMOUNT, SC 100BASE-TX TO 100BASE-FX MM, RACKMOUNT, MTRJ 100BASE-TX TO 100BASE-FX MM, RACKMOUNT, LC 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, SC 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, ST 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, 40KM, SC 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, 40KM, ST 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, MTRJ 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, LC 100BASE-TX TO 100BASE-FX SM, RACKMOUNT, 40KM, LC 100BASE-FX MM TO 100BASE-FX SM, RACKMOUNT, SC/ST 100BASE-FX MM TO 100BASE-FX SM, RACKMOUNT, ST/SC 100BASE-FX MM TO 100BASE-FX MM, RACKMOUNT, ST 100BASE-FX SM TO 100BASE-FX SM, RACKMOUNT, ST 100BASE-FX SM TO 100BASE-FX SM, RACKMOUNT, SC SFP Rackmount Gigabit Converter Part Number FTX-250R-TT FTX-250R-TS FTX-250R-TL FTX-250R-TZ FTX-250R-TC-XXXX FTX-250R-SS FTX-250R-SL FTX-250R-SZ FTX-250R-SC-XXXX FTX-250R-LL FTX-250R-LZ FTX-250R-LC-XXXX FTX-250R-ZZ FTX-250R-ZC-XXXX Description RACKMOUNT, LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-T RJ45 RACKMOUNT, LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-SX MM LC RACKMOUNT, LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-LX MM/SM LC RACKMOUNT, LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-1550nm SM LC RACKMOUNT, LINK A SFP 1000BASE-T RJ45, LINK B SFP 1000BASE-CWDM SM LC RACKMOUNT, LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-SX MM LC RACKMOUNT, LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-LX MM/SM LC RACKMOUNT, LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-1550nm SM LC RACKMOUNT, LINK A SFP 1000BASE-SX MM LC, LINK B SFP 1000BASE-CWDM SM LC RACKMOUNT, LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-LX MM/SM LC RACKMOUNT, LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-1550nm SM LC RACKMOUNT, LINK A SFP 1000BASE-LX MM/SM, LINK B SFP 1000BASE-CWDM SM LC RACKMOUNT, LINK A SFP 1000BASE-1550nm SM LC, LINK B SFP 1000BASE-1550nm SM LC RACKMOUNT, LINK A SFP 1000BASE-1550nm SM LC, LINK B SFP 1000BASE-CWDM SM LC Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance Limitations. 103 p indd /12/07 11:32:07 AM

104 Fiberdyne Labs, Inc. Gigabit CWDM Multiplexer System Part Number Build Matrix: F G M - X X X - X X - XXXX / XXXX / Purpose: Gigabit Multiplexer System (One of the two stations) F G M / FGM = Fiberdyne Labs "Gigabit Multiplexer System" Fiberdyne has integrated Gigabit Ethernet Media Converters with Wavelength Division Multiplexing (WDM). Each Gigabit Multiplexer System includes two stations. Each station includes the conversion electronics, the power modules, and the passive optics, typically housed in a rack-mount, 3U-high chassis. Customer interfaces can include any available 1000Base format. Additionally, these interfaces can be mixed. Multiple full-duplex links, from any format, can be multiplexed onto one fiber pair or onto a single fiber. The multiplexing uses Coarse WDM (CWDM) or Dense WDM (DWDM) techniques. Features: Complies with IEEE 802.3z/ab (Gigabit Ethernet) Multiplexed-link distance: 40 km (CWDM) or 60 km (DWDM) Power Monitor Panel shows status power supply module(s): Main and Aux Status LEDs: Power, Link and Activity Connectors: LC/UPC (fiber) or RJ-45 (1000Base-T) Packaging: 3U-high chassis, fits TIA-standard, 19-inch and 23 inch racks Standard Configuration: Rackmount chassis, 3U high SFP (Small Form-factor Pluggable) Ethernet interfaces Power Supply Modules are Hot-Swappable and Field Replacable Upgrade Ports for future expansion (i.e. add more links to a multiplexed link) Options: Dual-fiber or Single-fiber solutions: Dual-fiber: multiplex 2 to 8, full-duplex links onto a fiber pair Single-fiber: multiplex 2 to 4, full-duplex links onto a single fiber Note: with DWDM, more links are possible with separate optical module; the powered chassis can host 19 converter rack-cards. Customer interfaces: 1000Base-T, -SX, -LX, "-ZX", "-C", and "-D" Note: "-ZX" (1550-nm), "-C" (CWDM) and "-D" (DWDM) are not IEEE standards. However, they are common extensions of the standards. Mix and match customer interfaces within a chassis Digit # Description Options* 4th Fiber Solution for Mulitplexed Link D = Dual-fiber (duplex fiber) S = Single-fiber (simplex fiber) 5th-6th 7th 8th 9th - 12th Number of Full-duplex Links across Multiplexed Link Customer Interface Mulitplexed Link configuration Lowest CWDM Wavelength or DWDM Channel Example: 02 = 2 TX and 2 RX 03 = 3 TX and 3 RX 04 = 4 TX and 4 RX 05 = 5TX and 5 RX For more links, enter two-digit number. T = 1000Base-T, Twissted Pair S = 1000Base-SX, 850-nm, MM L = 1000Base-LX, 1310-nm, MM/SM Z = 1000Base, 1550-nm, SM C = 1000Base, CWDM, SM D = 1000Base, DWDM, SM X = multiple port types** C = CWDM D = DWDM Example: 1470 for CWDM multiplexed links CH23 for DWDM multiplexed links Coarse Wavelength Division Multiplexing (CWDM) Grid Table of Commonly used CWDM Wavelengths Center Wavelengths ** Cisco "Colors" Wavelength"Codes"*** 1470 Gray Violet Blue Green Yellow Orange Red Brown 61 Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths. These codes are the middle digit of the wavelength-not "channel numbers". Cisco is a registered trademark of Cisco Systems,Inc. 104 p indd /12/07 11:32:24 AM

105 Fiberdyne Labs, Inc. Gigabit CWDM Multiplexer System Each station is a chassis with media conversion electronics, multiplexing optics & power supplies. (Blue section in diagrams below) Merely connect your existing Gigabit Ethernet equipment and your fiber link. (Lavander sections in diagram below) Dual Fiber Example Part Number FGM-D02-SC-1470/1490 Description Fiberdyne Gigabit Multiplexer Dual Fiber with 2 Links (2 TX/2 RX) 1000Base-SX input, CWDM Wavelength FGM-D04-SC-1470/1530 Fiberdyne Gigabit Multiplexer Dual Fiber with 4 Links (4 TX/4 RX) 1000Base-SX input, CWDM Wavelength FGM-D08-SC-1470/1610 Fiberdyne Gigabit Multiplexer Dual Fiber with 8 Links (8 TX/8 RX) 1000Base-SX input, CWDM Wavelength Single Fiber Example Part Number FGM-S02-SC-1470/1530 Description Fiberdyne Gigabit Multiplexer Single Fiber with 2 Links (2 TX/2 RX) 1000Base-SX input, CWDM Wavelength Includes Head End and Far End Multiplexers FGM-S04-SC-1470/1610 Fiberdyne Gigabit Multiplexer Single Fiber with 4 Links (4 TX/4 RX) 1000Base-SX input, CWDM Wavelength Business Park Includes Drive., Head End Frankfort, and Far End NY Multiplexers p indd /12/07 11:32:51 AM

106 Fiberdyne Labs, Inc. VS-115F 5 Port 10/100 Switch with Fiber Connection KEY FEATURES: Complies with IEEE Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards Provides 4, 10/100Mbps switched ports and 1, 100Base-FX switched port. Each copper port supports both 10/100Mbps auto-negotiation and auto-sensing. Supports duplex type selector for setting the fiber port to either full or half duplex. Front View Full/Half duplex operation for each port. Supports 1K MAC addresses and automatic MAC address learning and aging. Store and forward architecture. Non-blocking switching fabric. Supports full-duplex flow control (IEEE 802.3x). Back pressure flow control in half duplex mode. Compact metal chassis design. SPECIFICATIONS: Fiber Port Fiber Media Copper Port Cables Filtering Address Filter Rate Forwarding Rate Ram Buffers LEDs MM ST, MM SC, SM SC, MM MT-RJ, or SM MT-RJ Connectors MM 1300nm 62.5/125 um fiber cable (max, distance: 2km) SM 1310nm 9/125 um fiber cable (max. distance: 15,30, or 50km) Shielded RJ-45 Jack 10Base-T Cat. 3, 5 UTP cable (100m max.) 100Base-TX Cat. 5 UTP cable (100m max.) Unicast/Multicast/Broadcast address: 1K MAC addresses per unit 14,880 pps for Ethernet, 148,800 pps for fast Ethernet 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet 128KB -Power Status -10/100, Link/Activity, Duplex/Collision status for each TP port -Link/Activity, Duplex/Collision status for fiber port Environment Temperature 0 to 40 C Relative Humidity: 10% to 90% non-condensing Dimensions Power 144mm x 100mm x 26mm (5.67 x 3.94 x 1.04 inch) +5VDC, 2500mA Rear View 5 PORT SWITCH Part Number Description VS-105FT ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & ST VS-105FC ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & SC VS-105FJ ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & MTRJ VS-105FL ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & LC VS-105FS ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & SC SM 40KM VS-105FS40 ETHERNET 10/100BASE-TX TO 100BASE-FX 5 PORT SWITCH, RJ45 & SC SM 40KM 106 p indd /12/07 11:33:15 AM

107 Fiberdyne Labs, Inc. 5 Port Gigabit Switch Plus (1) SFP Port Compact 5 Port Gigabit Switch To describe Fiberdyne's compact Gigabit Switch. This switch includes 5, 10/100/1000Base-T (i.e. twisted-pair) ports. The switch also includes a slot for a Gigabit SFP (Small Form-factor Pluggable) module. Therefore, the switch has 6 ports when the optional SFP is installed. Front View Rear View Note: Fiberdyne offers a variety of twisted-pair, multimode fiber and single-mode fiber SFPs. Features: Complies with (inc u/x/z/ab), IEEE 802.1Q Auto-negotiation and Auto-MDI/MDIX on TP ports Auto-negotiation (i.e. duplexing on fiber-sfp ports (if installed) Prevents packet loss with back pressure and flow control Status LEDs: Power, Speed, and Link/Activity Connectors: RJ-45 (T/TX), LC (SFP-1000Base-SX/LX/1550/CWDM/DWDM/BiDi) Provides in-band web-based management interface Provides port status, statistic monitoring and control function Supports port-based and 802.1Q Tag-based VLAN Provides QoS function Provides port link aggregation (trunking) function Provides port mirroring function Part Number VS-G510 Description 5-Port Gigabit Switch With SFP Slot Standard Configuration: Compact package 5-RJ45 connections for 10/100/1000Base-T/TX 1-SFP slot for 1000Base SFP transceiver modules (sold seperately) Options: SFP module for twisted-pair (TP) applications SFP for multimode or single-mode fiber applications SFP for CWDM (Coarse Wavelength Division Multiplexing) applications SFP for DWDM (Dense Wavelength Division Multiplexing) applications SFP for BiDi (bi-direction, single-fiber) applications Power Supplies: 120 or 240 VAC input Small Form-factor Pluggable (SFP) Transceivers Fiberdyne Labs, Inc. Part Number Build Matrix FGE - SFP - - (1000Base-) (Format) Format For CWDM Options 1470 = 1470 nm 1490 = 1490 nm 1510 = 1510 nm 1530 = 1530 nm 1550 = 1550 nm 1570 = 1570 nm 1590 = 1590 nm 1610 = 1610 nm 1000Base Options For DWDM T 1000Base-T, Twisted Pair, RJ-45 S 1000Base-SX, 850-nm, Multimode, LC L 1000Base-LX, 1310-nm, Multimode/Single-mode, LC Z 1550-nm, Single-mode, LC C CWDM, Single-mode, LC * D DWDM, Single-mode, LC * B BiDi (bi-directional, single-fiber), Single-mode, LC * Examples: * Note: must specify format, per the following table. Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. CHxx, where "xx" = ITU Grid Channel Number (e.g. CH23) For BiDi A = Alpha (TX 1310, RX 1490) O = Omega (TX 1490, RX 1310) FGE-SFP-T Gigabit Ethernet, SFP Transceiver, 1000Base-T, RJ-45 FGE-SFP-C-1470 Gigabit Ethernet, SFP Transceiver, CWDM (1470-nm), LC FGE-SFP-B-A Gigabit Ethernet, SFP Transceiver, BiDi (Alpha), LC 107 p indd /12/07 11:33:34 AM

108 Fiberdyne, Inc. 8 Port 10/100 Base Switch F 8-Port Switch 10/100Base with Fiber Connection 8-Port Switch 10/100Base-TX Switch VS08A-XX (Front View) VS08 (Front View) VS08A-XX (Rear View Multimode SC Version Shown) VS08 (Rear View) Purpose: To describe Fiberdyne's 8-Port Switches. One version includes eight 10/100Base-TXports, while the other includes seven 10/100Base-TX ports and one 100Base-FX port. This switch also supports Auto-MDI/MDIX on 10/100Base-TX ports. Standard Configuration: Compact size with data and power connections on the rear RJ-45 connections with Auto MDI/MDI-X, for 10/100Base-TX ports One 100Base-FX (fiber) connection (if equipped) Key Features: Complies with IEEE (Ethernet/Fast Ethernet). 10/100Base-TX ports are auto-sensing, auto negotiation and Auto MDIX. For fiber equipped switch: Multimode or singlemode fiber connections (if equipped). VLAN Concentrator to fiber port; each RJ-45 port can have separate VLAN. Uses flow control to prevent packet loss. Store and foward switching; full wire-speed fowarding/filtering. Learns/stores MAC address entries. Status LEDs: Power, Link/Speed/Activity and duplex collision. 8 PORT 10/100 ETHERNET SWITCH WITH FIBER Part Number VS08 VS08A-MS VS08A-MT VSO8A-S2 Description 8 PORT SWITCH 8 PORT SWITCH WITH 1 FIBER PORT, MM SC 8 PORT SWITCH WITH 1 FIBER PORT, MM ST 8 PORT SWITCH WITH 1 FIBER PORT, SM SC 20km 108 p indd /12/07 11:33:51 AM

109 Fiberdyne Labs Managed Switch 24 Port 10/100/1000Mbps Web-Smart Gigabit Ethernet Switches Description: The VS-G2402 switch is a rack-mountable, managed switch, which also offers two SFP module slots. Features include VLAN, QoS, trunking, mirroring, etc. The switch is managed through the user-friendly web interface. Additionally supports jumbo frames, making the VS-G2402 an optimum solution for your network projects. Features: 24-10/100/1000Mbps Gigabit Ethernet ports and 2 SFP slots In-band web-based management interface All RJ-45 ports support auto-negotiation and auto-mdi/mdi-x detection Full wire-speed forwarding 802.3x flow control for full-duplex and backpressure for half-duplex Port status, statistic monitoring and control function Port-based and 802.1Q Tag-based VLAN Quality of Service (QoS) Port link aggregation (trunking) Port mirroring Port bandwidth control Jumbo frames Management: In-band: Web Objects: System settings, port status/statistics, port control, VLAN, QoS, port trunking, port mirroring, trap setting, port bandwidth control, firmware upgrade. Power: VAC, 50-60Hz Consumption 30W max. Dimensions: 442 x 209 x 44 mm (17.4 x 8.2 x 1.7 inch) Specifications: Technical Data Sheet Available Online! Part Number VS-G2402 Description 24-Port 10/100/1000Base-T/TX + 2 SFP slots SFP Options 1000Base-SX, 850-nm 1000Base-LX, 1310-nm 1000Base, 1550-nm 1000Base, CWDM Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. For a selection of SFP Modules which can be used in this switch, please see catalog pages p indd /12/07 11:34:03 AM

110 Introduction: Small Form-factor Pluggable (SFP) Pluggable Transceivers Quick Links for Pricing Available Online: Fiberdyne MSA Compliant, Cisco Compatible, 3Com Compatible, Nortel Compatible, HP Compatible, Extreme Compatible Available Features: Complies with IEEE (1000Base or "Gigabit Ethernet") INF 8074i-SFP MSA (Multi-Source Agreement) compliant modules Connectors: RJ-45 for unshielded twisted pair (UTP); LC for fiber Standard telecommunications wavelengths for fiber applications (SX and LX) Enhanced formats for long haul or multiplexing applications nm (ZX) - CWDM (Coarse Wavelength Division Multiplexing) - DWDM (Dense Wavelength Division Multiplexing) - BiDi (bi-directional - transmit and receive multiplexed on a single fiber) Hot-pluggable-uses single 3.3 VDC power Fiberdyne Lab's SFP Transceivers are standard compliant modules, which are used in a variety of Ethernet equipment, such as our FTX-250 series of media converters and our Ethernet switches. As the name implies, the SFP modules simply plug into the available equipment ports. If your requirements change, you simply unplug your existing SFP module and plug-in your new module. Fiberdyne Labs offers a wide variety of SFP modules T, SX, LX, ZX, CWDM, DWDM and BiDi to meet your requirements. Check with for Cisco SFP compatibility chart detailing which Fiberdyne Cisco compatible SFPs work with which Cisco switches/platforms or contact your Fiberdyne Labs Sales Representative. Options: multiple formats Standard and "Enhanced" Connector Type Cable Type 1000Base-T RJ-45 UTP (Cat 5e & Cat 6) 1000Base-SX Duplex LC MMF (62.5/125) MMF (50/125) 1000Base-LX Duplex LC MMF (both) SMF (9/125) 1000Base "ZX" Duplex LC SMF (9/125) 1000Base "CWDM" Duplex LC SMF (9/125) 1000Base "DWDM" Duplex LC SMF (9/125) 1000Base "BiDi" Simplex LC SMF (9/125) Special Note about Compatibility: While our SFP transceivers are fully-compliant with IEEE and the SFP MSA, they may not be compatible with some network switch equipment. Some manufacturers program their equipment to accept only their brand of SFPs. Our experience has shown, that Cisco and HP are two such manufacturers. Therefore, if your switch equipment is made by such manufacturers, our MSA compliant SFPs may not be supported by your equipment. However, Fiberdyne Labs offer Cisco compatible, 3Com compatible, Nortel compatible, HP compatible, and Extreme compatible SFPs. Use our MSA compliant for all others. All trademarks are property of their respective owners. Cisco is a registered trademark of Cisco Systems,Inc. Nortel is a registered trademark of Nortel Systems. Extreme is a registered trademark of Extreme Networks. HP is a registered trademark of Hewlett-Packerd. 3Com is a registered trademark of 3Com. 110 p indd /12/07 11:34:22 AM

111 SFP Part Number Build Matrix and SFP Part Numbers Small Form-factor Pluggable (SFP) Transceivers Part Number Build Matrix FGE - SFP - (1000Base-) (Format) 1000Base Options T 1000Base-T, Twisted Pair, RJ45 S 1000Base-SX, 850nm, Multimode, LC L 1000Base-LX, 1310nm, Multimode/Singlemode, LC Z 1550nm, Singlemode, LC C CWDM, Singlemode, LC * D DWDM, Singlemode, LC * B BiDi (bi-directional, single fiber), Singlemode, LC * * Note: must specify format, per the following table. Format Options 1470 = 1470 nm 1490 = 1490 nm 1510 = 1510 nm For CWDM 1530 = 1530 nm 1550 = 1550 nm 1570 = 1570 nm 1590 = 1590 nm 1610 = 1610 nm For DWDM CHxx, where "xx" = ITU Grid Channel Number (e.g. CH23) ITU Grid (ITU Grid on pg. XX) For BiDi A = Alpha (TX 1310, RX 1490) O = Omega (TX 1490, RX 1310) Coarse Wavelength Division Multiplexing (CWDM) Grid Table of Commonly used CWDM Wavelengths Center Wavelengths ** Cisco "Colors" Wavelength"Codes"*** 1470 Gray Violet Blue Green Yellow Orange Red Brown 61 Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths. These codes are the middle digit of the wavelength-not "channel numbers". Cisco is a registered trademark of Cisco Systems, Inc. Example: FGE-SFP-T Gigabit Ethernet, SFP Transceiver, 1000Base-T, RJ-45 FGE-SFP-C-1470 Gigabit Ethernet, SFP Transceiver,CWDM (1470-nm), LC FGE-SFP-B-A Gigabit Ethernet, SFP Transceiver, BiDi (Alpha), LC Basic (includes IEEE Standard formats and 1550-nm) Part Number Description FGE-SFP-T 1000Base-TX, RJ-45 FGE-SFP-S 1000Base-SX, 850-nm, Multimode, LC FGE-SFP-L 1000Base-LX, 1310-nm, Multimode/Single-mode, LC FGE-SFP-Z 1000Base-ZX, 1550-nm, Single-mode, LC CWDM (Coarse Wavelength Division Multiplexing) Part Number Description FGE-SFP-C Base, CWDM, Singlemode, LC, 1470 FGE-SFP-C Base, CWDM, Singlemode, LC, 1490 FGE-SFP-C Base, CWDM, Singlemode, LC, 1510 FGE-SFP-C Base, CWDM, Singlemode, LC, 1530 FGE-SFP-C Base, CWDM, Singlemode, LC, 1550 FGE-SFP-C Base, CWDM, Singlemode, LC, 1570 FGE-SFP-C Base, CWDM, Singlemode, LC, Base-LX/LH, short wavelength. SFP-GE-L FDN-SFP-GE-L 1000Base-ZX SFP-GE-Z FDN-SFP-GE-Z FGE-SFP-C Base, CWDM, Singlemode, LC, 1610 Check with for Cisco SFP compatibility chart detailing which Fiberdyne Cisco compatible SFPs work with which Cisco switches/platforms BiDi (bi-dir or contact your Fiberdyne Labs Sales Representative BIDI bi-directional, single-fiber) Part Number Description FGE-SFP-B-A Alpha (TX 1310, RX 1490) FGE-SFP-B-O Omega (TX 1490, RX 1310) Note: Alpha and Omega must be used together for proper link operation. Therefore, purchase Alpha and Omega SFPs as pairs. MSA Compliant and Name Brand Compatible Description SFP Module, MM-850-LC w/ddmi Distance: 500 Meters SFP Module, SM-1310-LC w/ddmi Distance: 15km SFP Module, SM-1310-LC w/ddmi Distance: 40km SFP Module, SM-1550-LC w/ddmi Distance: 50km Fiberdyne Part Number FDN M-22 FDN S-22 FDN S-22 FDN S-22 Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet Distance Limitaitions. Cisco Compatible SFPs Description Cisco Part Number Fiberdyne Part Number 1000Base-T SFP Cisco Compatible 1000Base-T GLC-T FDN-GLC-T Small Form-factor Pluggable (SFP) Mini GBIC 1000Base-SX SFP 1000Base-SX fiber, mini GBIC card; The GLC-SX-MM, 1000Base-SX SFP GLC-SX-MM FDN-GLC-SX-MM operates on ordinary multimode fiber optic link spans of up to 550 meters. 1000Base-LX SFP The GLC-LH-SM SFP operates on ordinary single-mode fiber GLC-LX/LH-SM FDN-GLC-LX/LH-SM link spans of up to 10,000 meters. 1000Base-ZX SFP, Extended Distance GLC-ZX-SM FDN-GLC-ZX-SM 1000Base-BX-10-D downstream bi-directional GLC-BX-D & FDN-GLC-BX single fiber and 1000Base-BX10U -D GLC-BX-U & GLC-BX-U upstream bi-directional single fiber. 100Base-EX, Fast Ethernet SFP, 1310nm, SMF, 40km. GLC-FE-100EX FDN-GLC-FE-100EX 100Base-FX SFP, 1310-nm, MMF, 2km GLC-FE-100-FX. FDN-GLC-FE-100-FX 100Base-LX, Fast Ethernet SFP, 1310-nm, SMF, 10km. GLC-FE-100LX FDN-GLC-FE-100LX 100Base-ZX, Fast Ethernet SFP, 1550nm, SMF, 80km. GLC-FE-100ZX FDN-GLC-FE-100ZX 1000Base-SX, Short Wavelength GE-SX-MM FDN-GE-SX-MM 1000Base-LX, Operates On Singlemode Fiber Links to 10,000 Meters GE-LX/LH-SM FDN-GE-LX/LH-SM 1000Base-ZX GE-ZX-SM FDN-GE-ZX-SM 111 p indd /12/07 11:35:00 AM

112 SFP Part Number Build Matrix and SFP Part Numbers (Cisco compatible continued) Cisco Compatible SFPs Description Cisco Part Number Fiberdyne Part Number SFP OC-3/STM-1 SFP-OC3-IR1 FDN-SFP-OC3-IR1 Intermediate Reach SFP OC-3/STM-1 SFP-OC3-LR1 FDN-SFP-OC3-LR1 Long Reach, 40 km SFP OC-3/STM-1 SFP-OC3-LR2 FDN-SFP-OC3-LR2 Long Reach, 80 km SFP OC-3/STM-1 SFP-OC3-MM FDN-SFP-OC3-MM Multimode SFP OC-3/STM-1 Short-reach, 2km SFP-OC3-SR FDN-SFP-OC3-SR transceiver module, 1310-nm wavelength, LC Connector SFP OC-12/STM-4 SFP-OC12-IR1 FDN-SFP-OC12-IR1 Short Reach, 2 km SFP OC-12/STM-4 SFP-OC12-SR FDN-SFP-OC12-SR Short-reach, 2km transceiver module, 1310-nm wavelength, LC Connector SFP OC-12/STM-4 SFP-OC12-LR1 FDN-SFP-OC12-LR1 Long-reach, 40km transceiver module, 1310-nm wavelength, LC Connector SFP OC-12/STM-1 SFP-OC12-LR2 FDN-SFP-OC12-LR2 Long Reach, 80 km SFP OC-48/STM-16 Short-reach, 2km SFP-OC48-SR FDN-SFP-OC48-SR transceiver module, 1310-nm wavelength, LC Connector SFP OC-48/STM-16 Intermediate-reach SFP-OC48-IR1 FDN-SFP-OC48-IR1 (15km) transceiver module, 1310-nm wavelength, LC Connector SFP OC-48/STM-16 Long-reach, 80km SFP-OC48-LR2 FDN-SFP-OC48-LR2 transceiver module, 1550-nm wavelength, LC Connector 112 ORDER USING FIBERDYNE PART NUMBERS Check with for Cisco SFP compatibility chart detailing which Fiberdyne Cisco compatible SFPs work with which Cisco switches/platforms or contact your Fiberdyne Labs Sales Representative 3Com Compatible SFPs Description Part Number Fiberdyne Part Number 3Com 100% compliant, Gigabit Ethernet SFP, transceiver module for MMF, 3CSFP91 FDN-3CSFP nm wavelength, LC connector, 1000Base-SX. 3Com 100% compliant, Gigabit Ethernet SFP, transceiver module for SMF, 3CSFP92 FDN-3CSFP nm wavelength, LC connector, 1000Base-LX. 3Com 100% compliant, Gigabit Ethernet SFP, 3CSFP92 FDN-3CSFP93 transceiver module for copper networks, 1000Base-T. 3Com 100% compliant, Gigabit Ethernet SFP, 3CSFP97 FDN-3CSFP97 transceiver module for SMF, 1550-nm, 1000Base-ZX. Nortel Compatible SFPs Description Part Number Fiberdyne Part Number 3Com 100% compliant, Gigabit Ethernet SFP, AA FDN-AA Base-SX. 3Com 100% compliant, Gigabit Ethernet SFP, AA FDN-AA Base-LX. HP Compatible SFPs Description Part Number Fiberdyne Part Number HP 100% compliant, Gigabit Ethernet SFP, J4858A FDN-J4858A 1000Base-SX. HP 100% compliant, Gigabit Ethernet SFP, J4859A FDN-J4859A 1000Base-LX. Extreme Compatible SFPs Description Part Number Fiberdyne Part Number Extreme 100% compliant, Gigabit Ethernet SFP, FDN Base-SX. Cisco Compatible CWDM SFPs Extreme 100% compliant, Description Cisco Part Number Fiberdyne Part Number Gigabit Ethernet SFP, FDN CWDM SFP 1470-nm CWDM-SFP-1470 FDN-CWDM-SFP Base-LX. CWDM SFP 1490-nm CWDM-SFP-1490 FDN-CWDM-SFP-1490 Requires mode-conditioning cable if used with MMF. Extreme 100% compliant, CWDM SFP 1510-nm CWDM-SFP-1510 FDN-CWDM-SFP-1510 Gigabit Ethernet SFP, FDN CWDM SFP 1530-nm CWDM-SFP-1530 FDN-CWDM-SFP Base-ZX. CWDM SFP 1550-nm CWDM-SFP-1550 FDN-CWDM-SFP-1550 All trademarks are property of their respective owners. CWDM SFP 1570-nm CWDM-SFP-1570 FDN-CWDM-SFP-1570 Cisco is a registered trademark of Cisco Systems, Inc. CWDM SFP 1590-nm CWDM-SFP-1590 FDN-CWDM-SFP-1590 Nortel is a registered trademark of Nortel Systems. CWDM SFP 1610-nm CWDM-SFP Business FDN-CWDM-SFP-1610 Park Drive., Frankfort, NY HP is a registered trademark of Hewlett-Packerd. 3Com Toll Free: Fax: is a registered trademark of 3Com. [email protected] Extreme is a registered trademark of Extreme Networks. p indd /12/07 11:35:14 AM

113 Application Notes For SFPs and Product Specification Application Note For SFPs Ethernet Cable Choices and Link Distances IEEE * Data Rate Cable Type IEEE Max. IEEE Non-Std Standard (Mbps) Distance Ref. Distance 10Base-T 10 Category 3, 4, 5, UTP 100 m Table Base-FL 10 Multimode: 850 nm: 62.5/125 μm 2 km Table Base-FL 10 Single-mode: 1300 nm: 9/125 μm 14 km 100Base-TX 100 Category 5 UTP 100 m Table Base-FX 100 Multimode: 1300 nm: 62.5/125 μm 100Base-FX or 50/125 μm 2 km Table Base-FX 100 Single-mode: 1300 nm: 9/125 μm 15 km 40 km 1000Base-T 1000 Category 5 UTP 100 m Table Base-SX 1000 Multimode: 850 nm: 62.5/125 μm 220 m Table Base-SX 1000 Multimode: 850 nm: 50/125 μm 500 m Table Base-SX 1000 Multimode: 850 nm: 50/125 μm 1000Base-SX nm 50/125 OM m 1000Base-LX 1000 Multimode: 1300 nm: 62.5/125 μm or 50/125 μm 550 m Table Base-LX Single-mode: 1300 nm: 9/125 μm 5 km Table km 1000Base-ZX 1000 Single-mode: 1550 nm: 9/125 μm 30 km 50 km 10GBase-T 10,000 Category 6 55m Table GBase-T 10,000 Category 6A 100m Table GBase-SR 10, nm 50/125 OM3 Table GBase-SR 850nm 62.5/125 33m Table GBase-LR 10,000 Single-mode 1310nm 9/125 10km Table GBase-ER 10,000 Single-mode 1550nm 9/125 40km Table GBase-LX4 10,000 Mulitmode: 1310nm: 50/125 μm 300m Table 44-4 Singlemode: 1300nm: 9/125 μm 10km Table 44-4 * IEEE Standard is the standard for all Ethernet equipment. All Ethernet equipment, which is compliant with 802.3, will work with all other, compatible, Ethernet equipment. Note: to be compatible, the equipment must talk at the same speed (e.g. 100Base) and must use the same media (e.g nm on multimode fiber). Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet Distance limitations. Product Specification: ItemDescription Unit Value Standard Compliance IEEE 802.3z MSA SFP Module Properties Hot-swappable Wire-speed transfer Available SFP Configurations * Base (Gigabit Ethernet) T, SX, LX - Enhanced Gigabit Ethernet ZX, CWDM, DWDM, BiDi Center Wavelength (fiber-optic SFPs) - SX LX ZX nm CWDM per ITU-T G DWDM per ITU-T G BiDi (bi-direction, single-fiber) 1310 (Alpha)/1490 (Omega) Temperature Operating C 0 to +70 Temperature Storage C -40 to +85 Overall dimensions (L x W x H) mm 57 x 14 x 13 *SFP Configurations Standard Output Input Rated Min. Power and Enhanced Power Power Distance Budget (dbm) (dbm) (meters) (db) 1000Base-T Base-SX ** -9 to to Base-LX -9 to to ZX (1550-nm) 0 to to CWDM -5 to 0-23 to DWDM 0 to to BiDi Alpha/Omega -9 to to ** Note: longer 1000Base-SX distances are possible, when using Fiberdyne 10-Gigabit fiber optic cable and jumper assemblies. Ordering Information: reference Part-Number Build Matrix, 113 p indd /12/07 11:35:29 AM

114 Fiberdyne Labs Gigibit Interface Converter Gigibit Interface Converter (GBICs) Cisco Compatible 3Com Compatible Nortel Compatible HP Compatible Extreme Compatible Introduction: Cisco compatible GBIC for Gigabit Ethernet and Fibre-Channel Features: Hot-swappable input/output device that plugs into IEEE 802.3z standards compliant GBIC slots of Cisco switches or routers Performance: 1.25Gbps full-duplex links Optical link budgets greater than or equal to that required by IEEE Platform support: Cisco-compatible CWDM GBICs are supported across a variety of Cisco switches, routers, and optical transport devices Connectors and Cables: Equipment: standard GBIC interface (no cabling required) Network: duplex SC/PC connector (use appropriate jumper/patchcord) Note: Only connections with patchcords with PC or UPC connectors are supported. Patchcords with APC connectors are not supported. Cisco Compatible GBICs All trademarks are property of their respective owners. Cisco is a registered trademark of Cisco Systems, Inc. Nortel is a registered trademark of Nortel Systems. Extreme is a registered trademark of Extreme Networks. HP is a registered trademark of Hewlett-Packerd. 3Com is a registered trademark of 3Com. Description Cisco Part Number Fiberdyne Part Number 1000Base-T GBIC: The Cisco Compatible GBIC provides full duplex Gigabit Ethernet connectivity to high-end workstations and between WS-G5483 FDN-WS-G5483 wiring closets over existing copper network infrastructures. 1000Base-SX GBIC: is a hot-swappable input/output device that plugs into a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. WS-G5484 FDN-WS-G BASE-LX/LH long haul GBIC (singlemode or multimode) is a hot-swappable input/output device that plugs into a Gigabit Ethernet WS-G5486 FDN-WS-G5486 port/slot, linking the port with the fiber-optic network. 1000Base-ZX extended reach GBIC(singlemode): operates on ordinary single mode fiber optic link spans of up to 70 km in length. WS-G5487 FDN-WS-G Cisco CWDM Compatible GBICs Description Cisco Part Number Fiberdyne Part Number CWDM GBIC, 1470-nm CWDM-GBIC-1470 FDN-CWDM-GBIC-1470 CWDM GBIC, 1490-nm CWDM-GBIC-1490 FDN-CWDM-GBIC-1490 CWDM GBIC, 1510-nm CWDM-GBIC-1510 FDN-CWDM-GBIC-1510 CWDM GBIC, 1530-nm CWDM-GBIC-1530 FDN-CWDM-GBIC-1530 CWDM GBIC, 1550-nm CWDM-GBIC-1550 FDN-CWDM-GBIC-1550 CWDM GBIC, 1570-nm CWDM-GBIC-1570 FDN-CWDM-GBIC-1570 CWDM GBIC, 1590-nm CWDM-GBIC-1590 FDN-CWDM-GBIC-1590 CWDM GBIC, 1610-nm CWDM-GBIC-1610 FDN-CWDM-GBIC-1610 Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. All trademarks are property of their respective owners. p indd /12/07 11:35:42 AM

115 Fiberdyne Labs Gigibit Interface Converter (GBICs) Gigibit Interface Converter (GBICs) continued 3Com Compatible GBICs Description 3Com Part Number Fiberdyne Part Number 1000Base-T GBIC: 3Com 100% compliant 1000Base-T, connects a GBIC port to Category 5 wiring via 3CGBIC93A FDN-3CGBIC93A a standard RJ-45 interface. Maximum distance is 328 feet (100 meters) 1000Base-SX GBIC: 850nm, 3Com 100% compliant 1000Base-SX, operates on ordinary multimode fiber (MMF) 3CGBIC91 FDN-3CGBIC91 optic link spans up to 1815 feet (550 m) long. 1000Base-LX/LH GBIC: 1310nm, 3Com 100% compliant 1000Base-SX, operates on ordinary singlemode fiber (SMF) 3CGBIC92 FDN-3CGBIC92 optic link spans up to 6.2 miles (10k) long. Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. 1000Base-ZX GBIC: 1550nm, 3Com 100% compliant 1000Base-ZX, operates on ordinary singlemode fiber (SMF) 3CGBIC97 FDN-3CGBIC97 optic link spans up to 43.5 miles (70km) long. Nortel Compatible GBICs Description Nortel Part Number Fiberdyne Part Number 1000Base-T GBIC AA FDN-AA Base-SX GBIC AA FDN-AA Base-LX/LH GBIC AA FDN-AA Base-ZX GBIC AA FDN-AA Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. HP Compatible GBICs Description HP Part Number Fiberdyne Part Number 1000Base-T GBIC J4834A FDN-J4834A 1000Base-SX GBIC J4131A FDN-J4131A 1000Base-LX/LH GBIC J4132A FDN-J4132A Extreme Compatible GBICs Description Extreme Part Number Fiberdyne Part Number 1000Base-T GBIC FDN Base-SX GBIC FDN Base-LX/LH GBIC FDN Base-ZX GBIC FDN Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations. All trademarks are property of their respective owners. Cisco is a registered trademark of Cisco Systems, Inc.Nortel is a registered trademark of Nortel Systems. Extreme is a registered trademark of Extreme Networks. HP is a registered trademark of Hewlett-Packerd. 3Com is a registered trademark of 3Com. 115 p indd /12/07 11:35:56 AM

116 Fiberdyne Labs, Inc. Cat 5e and Cat 6 Patchcords COPPER ASSEMBLY PART NUMBERS F WIRING PATTERN A = 568A B = 568B X = CROSSOVER (Cat 6e standard crossover wiring pattern will be used when building Cat 5e or Cat 6) 2 CABLE TYPE 0 = STRANDED RISER P = SOLID PLENUM L = SOLID RISER S = SOLID SHIELDED NON-PLENUM H = STRANDED SHIELDED NON-PLENUM D = SOLID SHIELDED PLENUM 3 BOOTS 0 = NO BOOTS S = SNAGLESS BOOTS (SAME COLOR AS CABLE) P = PANDUIT SNAGLESS CONNECTOR G = SNAGLESS BOOTS (CUSTOM COLOR CONFIGURATION) 4 CONNECTOR ONFIGURATION 0 = RJ45-RJ45 3 = RJ45- RJ45 SHIELDED 1 = RJ = RJ45 SHIELDED - RJ45 SHIELDED 2 = (SHIELDED RJ45s ONLY USED WITH SHIELDED CABLE) 5 CABLE SPEED Z = Cat 5e 6 = Cat = 4 PAIR CABLE 2 = 2 PAIR CABLE Call for a quote today! 7, 8, 9 LENGTH 10 F = Feet M = Meters 11 COLOR A=GRAY G=GREEN O=ORANGE W=WHITE B=BLUE K=BLACK P=PURPLE Y=YELLOW E=BEIGE N=PINK R=RED 116 p indd /12/07 11:36:07 AM

117 Fiberdyne Labs, Inc. Cat 5e and Cat 6 Patchcords Cat 5e Shown with snagless boot (optional) Cat 5e RJ45 Shown with snagless boot (optional) Cat 6 Snagless RJ45 Shown with snagless boot (optional) RJ45 Cat 6 Snagless RJ45 with integrated boot Note: Custom pinouts available Packaged cables available Custom and standard lengths available 117 p indd /12/07 11:36:46 AM

118 Category 5e and 6 Bulk Cable 6 Bulk Cables CATEGORY 6 Bulk Cables - Premium Grade Bulk Cat 6 Solid, Non-Plenum Standard Order Size 1000 Feet 5e Bulk Cables CATEGORY 5e Bulk Cables - Premium Grade Bulk Cat 5e Solid, Plenum Standard Order Size 1000 Feet Description Color Part # Bulk Cat 5e Solid, Plenum White F5EPYPXFW Bulk Cat 5e Solid, Plenum Blue F5EPYPXFB Bulk Cat 5e Solid, Plenum Yellow F5EPYPXFY Bulk Cat 5e Solid, Plenum Green F5EPYPXFG Bulk Cat 5e Solid, Plenum Gray F5EPYPXFA Bulk Cat 5e Solid, Plenum Red F5EPYPXFR Bulk Cat 5e Solid, Plenum Orange F5EPYPXFO Bulk Cat 5e Solid, Plenum Pink F5EPYPXFN Bulk Cat 5e Solid, Plenum Black F5EPYPXFK Bulk Cat 5e Solid, Plenum Purple F5EPYPXFP CATEGORY 5e Bulk Cables - Premium Grade Bulk Cat 5e Stranded, Non-Plenum Standard Order Size 1000 Feet Description Color Part # Bulk Cat 5e Stranded, Non-Plenum White F5SPNPXFW Bulk Cat 5e Stranded, Non-Plenum Blue F5SPNPXFB Bulk Cat 5e Stranded, Non-Plenum Yellow F5SPNPXFY Bulk Cat 5e Stranded, Non-Plenum Green F5SPNPXFG Bulk Cat 5e Stranded, Non-Plenum Gray F5SPNPXFA Bulk Cat 5e Stranded, Non-Plenum Red F5SPNPXFR Bulk Cat 5e Stranded, Non-Plenum Orange F5SPNPXFO Bulk Cat 5e Stranded, Non-Plenum Pink F5SPNPXFN Bulk Cat 5e Stranded, Non-Plenum Black F5SPNPXFK Bulk Cat 5e Stranded, Non-Plenum Purple F5SPNPXFP Description Color Part # Bulk Cat 6 Solid, Non-Plenum White F6EPNPXFW Bulk Cat 6 Solid, Non-Plenum Blue F6EPNPXFB Bulk Cat 6 Solid, Non-Plenum Yellow F6EPNPXFY Bulk Cat 6 Solid, Non-Plenum Green F6EPNPXFG Bulk Cat 6 Solid, Non-Plenum Gray F6EPNPXFA Bulk Cat 6 Solid, Non-Plenum Red F6EPNPXFR Bulk Cat 6 Solid, Non-Plenum Orange F6EPNPXFO Bulk Cat 6 Solid, Non-Plenum Pink F6EPNPXFN Bulk Cat 6 Solid, Non-Plenum Black F6EPNPXFK Bulk Cat 6 Solid, Non-Plenum Purple F6EPNPXFP CATEGORY 6 Bulk Cables - Premium Grade Bulk Cat 6 Solid, Plenum Standard Order Size 1000 Feet Description Color Part # Bulk Cat 6 Solid, Plenum White F6EPYPXFW Bulk Cat 6 Solid, Plenum Blue F6EPYPXFB Bulk Cat 6 Solid, Plenum Yellow F6EPYPXFY Bulk Cat 6 Solid, Plenum Green F6EPYPXFG Bulk Cat 6 Solid, Plenum Gray F6EPYPXFA Bulk Cat 6 Solid, Plenum Red F6EPYPXFR Bulk Cat 6 Solid, Plenum Orange F6EPYPXFO Bulk Cat 6 Solid, Plenum Pink F6EPYPXFN Bulk Cat 6 Solid, Plenum Black F6EPYPXFK Bulk Cat 6 Solid, Plenum Purple F6EPYPXFP CATEGORY 6 Bulk Cables - Premium Grade Bulk Cat 6 Stranded, Non-Plenum Standard Order Size 1000 Feet Description Color Part # Bulk Cat 6 Stranded, Non-Plenum White F6SPNPXFW Bulk Cat 6 Stranded, Non-Plenum Blue F6SPNPXFB Bulk Cat 6 Stranded, Non-Plenum Yellow F6SPNPXFY Bulk Cat 6 Stranded, Non-Plenum Green F6SPNPXFG Bulk Cat 6 Stranded, Non-Plenum Gray F6SPNPXFA Bulk Cat 6 Stranded, Non-Plenum Red F6SPNPXFR Bulk Cat 6 Stranded, Non-Plenum Orange F6SPNPXFO Bulk Cat 6 Stranded, Non-Plenum Pink F6SPNPXFN Bulk Cat 6 Stranded, Non-Plenum Black F6SPNPXFK Bulk Cat 6 Stranded, Non-Plenum Purple F6SPNPXFP Cable Packaging: Premium Cable package type -reel Note: all colors are not immediately available for all cable types. Please call for lead time and stock cable. 118 Cat 5e Premium Grade Cable Specifications Rated Temperature: 75 C UL listed to Subject 444 Meets Cat 5 enhanced Cabling Specifications TIA/EIA 568-A-5 24 AWG UTP 4 Pair Test to 400Mhz Cat 6 Premium Grade Cable Specifications Exceeds TIA/EIA & ISO/IEC Specifications 24 AWG UTP 4 Pair Jacket Type PVC Tested to 550Mhz p indd /12/07 11:37:05 AM

119 Miscellaneous Copper Products Fiberdyne Labs, Inc. Category 5e and Category 6 Patch Panels Fiberdyne Labs, Inc. manufactures a full line of Category 5e products. Fiberdyne Labs manufactures 24, 48, 72, and 96 port patch panels. All are 110 punch block terminated and incorporate cross talk elemination technology. Available with 568A or 568B wiring scheme. Count on Fiberdyne Labs for your CATEGORY 5e and CATEGORY 6 requirements. Part # FDORGE19 3.5" Cable Organizer Horizontal and Vertical Part # FDORMC19 3.5" Cable Organizer Horizontal Cat 5e Features: Enhanced Category 5e Patch Panel Patch Panels High Performance IDC Terminal Block for 110 and Krone 19 Patch Panel, 1U High Accepts AWG. Solid or Stranded Wire Supports 568A/B Wiring Guidelines Meets ISO/IEC Fixed Cat 5e Patch Panel (Traditional) Part # FDORGC " Cable Organizer Low Density with clips 7 Foot Open Frame Relay Rack Part # FDRAOP19 Part Number F5E F5E F5E Description 12 Port Cat 5e Patch Panel 110 A/B 24 Port Cat 5e Patch Panel 110 A/B 48 Port Cat 5e Patch Panel 110 A/B Cat 6 Patch Panels Features: Category 6 Patch Panel High Performance IDC Terminal Block for 110 and Krone 19 Patch Panel, 1U High Accepts AWG. Solid or Stranded Wire Supports 568A/B Wiring Guidelines Meets ISO/IEC Certified Category 5e Couplers Part Number: Extend Category 5e UTP Patch cords without losing Category 5e performance. Meets EIA/TIA 568-A Category 5e standards. PC board design for maximum reliability. Part Number F6E24BPM01 F6E48BPM01 Description 24 Port Patch Panel with 24 modules 48 Port Patch Panel with 48 modules Part # Description Cat 5e Certified Coupler ILC-U508A-WT 119 p indd /12/07 11:37:29 AM

120 DS3- Cable Assemblies Features: Conductors AWG Silver Plated, Solid Copper Dielectric -- Cellular Polyethylene Jacket -- Gray PVC Braid Wire -- Foil with a Tin Copper Construction -- 95% Coverage Braid UL Listed -- Type CMR Structural MHz Return Loss -- (Minimum) Nominal Capacitance pf/ft Nominal Impedance OHMS Nominal Velocity of Propogation -- 78% CSA -- CXC FT-4 Single Cable Part Number FDS F FDS F FDS F FDS F FDS F FDS F Length 6 Feet 10 Feet 20 Feet 30 Feet 50 Feet 100 Feet 6 Cable Tie-Wrapped Bundle Part Number Length FDS F 6 Feet FDS F 10 Feet FDS F 20 Feet FDS F 30 Feet FDS F 50 Feet FDS F 100 Feet 12 Cable Jacketed Bundle Part Number Length FDS F 6 Feet FDS F 10 Feet FDS F 20 Feet FDS F 30 Feet FDS F 50 Feet FDS F 100 Feet 12 Cable Tie-Wrapped Bundle Part Number Length FDS F 6 Feet FDS F 10 Feet FDS F 20 Feet FDS F 30 Feet FDS F 50 Feet FDS F 100 Feet 16 Cable Jacketed Bundle 24 Cable Tie-Wrapped Bundle Part Number Length Part Number Length FDS F 6 Feet FDS F 6 Feet FDS F 10 Feet FDS F 10 Feet FDS F 20 Feet FDS F 20 Feet FDS F 30 Feet FDS F 30 Feet FDS F 50 Feet FDS F 50 Feet FDS F 100 Feet FDS F 100 Feet Fiberdyne Labs will customize DS-3 cable assemblies to customer specifications.quantity discounts are available. Dual DS3 Cable With Tracer Part Number Dual Cable With Tracer Length FDS F Dual Cable With Tracer 6 Feet FDS F Dual Cable With Tracer 10 Feet FDS F Dual Cable With Tracer 20 Feet FDS F Dual Cable With Tracer 30 Feet FDS F Dual Cable With Tracer 50 Feet FDS F Dual Cable With Tracer 100 Feet Dual DS3 Cable Without Tracer Part Number Dual Cable Without Tracer Length FDS F Dual Cable Without Tracer 6 Feet FDS F Dual Cable Without Tracer 10 Feet FDS F Dual Cable Without Tracer 20 Feet FDS F Dual Cable Without Tracer 30 Feet FDS F Dual Cable Without Tracer 50 Feet FDS F Dual Cable Without Tracer 100 Feet 120 p indd /12/07 11:37:47 AM

121 Fiberdyne Labs, Inc. Coaxial Drop Cables RG 59 Drop Cable Assembly-Bonded Foil Construction Part Number: Description Length F210001F Snap-N-Seal Style Connector, Commscope RG59 F5967BVV 67% Bonded Foil. 1 FT F210002F Snap-N-Seal Style Connector, Commscope RG59 F5967BVV 67% Bonded Foil. 2 FT F210003F Snap-N-Seal Style Connector, Commscope RG59 F5967BVV 67% Bonded Foil. 3 FT F210004F Snap-N-Seal Style Connector, Commscope RG59 F5967BVV 67% Bonded Foil. 4 FT RG6 also available. Contact your Fiberdyne representative Adapter with Male BNC Connector & Female F Connector. 75 Ohm Terminator with Male BNC Connector. Item No. Description Adapter, BNC Male to Female, 75 Ohm Terminator, BNC Male, 75 Ohm 121 p indd /12/07 11:38:01 AM

122 A WORLDWIDE SUPPLIER OF FIBER OPTIC AND COMMUNICATION PRODUCTS CATALOG #11 Recycle, or better yet, do not discard. 127 Business Park Drive, Frankfort, NY PRSRT U.S. Postage PAID FIBERDYNE LABS