UniCam High-Performance Connectors, Multimode and Single-Mode
|
|
|
- Godfrey James
- 7 years ago
- Views:
Transcription
1 features and benefits Broad operating temperature (-40 to +75 C) Factory-polished end face Fast termination and no consumables Minimum insertion loss Performance guaranteed Utility and flexibility Consistent optical performance Low installation cost Optimum optical performance 100 percent yield guarantee UniCam High-Performance Multimode Connectors Photo LAN3275 SPECIFICATION SHEET LAN-1220-EN PAGE 1 Corning Cable Systems UniCam High-Performance Connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision ceramic ferrule connectors guarantee exceptional insertion loss 0.1 db typical/0.5 db maximum per connector pair for multimode, 0.2 db typical/0.5 db maximum per connector pair for single-mode. Installation of an LC, SC or ST Compatible Connector can be accomplished in about 50 seconds with the UniCam High- Performance Tool Kit. The lightweight, hand-held installation tool and the high-performance cleaver virtually eliminate human variability during installation, ensuring terminations are right, the first time, every time. This kit was designed with consideration for the network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fiber to the fiber stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance guaranteed. Every UniCam Connector is guaranteed to meet the published specification at the time of installation or Corning Cable Systems will replace it. UniCam High-Performance Tool Kit Photo LAN3334 PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE SPLICE CLOSURES TEST EQUIPMENT SPLICE EQUIPMENT TRAINING
2 UniCam High-Performance SC Connectors Photo LAN3221 UniCam Connector Z-Pak Organizers Photo LAN1675 specifications Intermateability Qualification Durability Tensile Strength Operating Temperature Connectors are FOCIS compliant with TIA/EIA A (LC); TIA/EIA (SC); TIA/EIA (ST Compatible) Passed EIA/TIA 568-B db change, 500 rematings, FOTP lb 0.2 db change on jacketed cable exceeds; 0.5 lb 0.2 db change on 900 µm cable; FOTP-6-40º to +75ºC, exceeding EIA/TIA 568-B.3 SPECIFICATION SHEET LAN-1220-EN PAGE 2
3 specifications (continued) Multimode Insertion Loss Typical/ Reflectance Housing Boot Connector Type Fiber Type Maximum (db)* (db) Color Color LC 62.5 µm multimode 0.1/ Beige Beige LC 50 µm multimode 0.1/ Black Black LC 50 µm LOMMF 0.1/ Black Aqua SC 62.5 µm multimode 0.1/ Beige Beige SC 50 µm multimode 0.1/ Black Black SC 50 µm LOMMF 0.1/ Black Aqua ST Compatible 62.5 µm multimode 0.1/ Amber Beige ST Compatible 50 µm multimode 0.1/ Amber Black ST Compatible 50 µm LOMMF 0.1/ Amber Aqua * Insertion loss values given for installation using a UniCam High-Performance Tool Kit. When installed using a UniCam Standard Tool Kit, the insertion loss values are 0.3 db typical and 0.75 db maximum. Reflectance values for single-mode are for 18º to 26ºC. Single pack LC connectors are sold with one 900 µm boot, one 2.0/1.6 boot and one 2.9 mm boot; Single pack SC and ST Compatible connectors are sold with one 900 µm boot and one 2.9 mm boot. Organizer packs include 900 µm boots only. LOMMF = Laser-optimized multimode fiber. SPECIFICATION SHEET LAN-1220-EN PAGE 3 Single-Mode Insertion Loss Typical/ Reflectance Housing Boot Connector Type Polish Maximum (db)* (db) Color Color LC APC 0.2/ Green Green LC UPC 0.2/ Blue Blue SC APC 0.2/ Green Green SC UPC 0.2/ Blue Blue ST Compatible UPC 0.2/ Amber Blue PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE SPLICE CLOSURES TEST EQUIPMENT SPLICE EQUIPMENT TRAINING
4 ordering information Part Number Description LC Connectors X X-Z Z Z Z Z UniCam High-Performance LC Connector, 50 µm LOMMF*, ceramic ferrule, UniCam High-Performance LC Connector, 50 µm multimode, ceramic ferrule, UniCam High-Performance LC Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance LC Connector, 50 µm LOMMF*, ceramic ferrule, UniCam High-Performance LC Connector, 50 µm multimode, ceramic ferrule, UniCam High-Performance LC Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance LC Connector, UPC polish, single-mode, ceramic ferrule, UniCam High-Performance LC Connector, UPC polish, single-mode, ceramic ferrule, UniCam High-Performance LC Connector, APC polish, single-mode, ceramic ferrule, UniCam High-Performance LC Connector, APC polish, single-mode, ceramic ferrule, * LOMMF = Laser-optimized multimode fiber. Note: Organizer packs are packs of 25 unassembled UniCam Connectors separated into components and 900 µm boots only. SPECIFICATION SHEET LAN-1220-EN PAGE 4
5 ordering information (continued) Part Number SC Connectors X X-Z Z Z Z Z Description * LOMMF = Laser-optimized multimode fiber. SPECIFICATION SHEET LAN-1220-EN PAGE 5 UniCam High-Performance SC Connector, 50 µm LOMMF*, ceramic ferrule, UniCam High-Performance SC Connector, 50 µm multimode, ceramic ferrule, UniCam High-Performance SC Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance SC Connector, 50 µm LOMMF*, ceramic ferrule, UniCam High-Performance SC Connector, 50 µm multimode, ceramic ferrule, UniCam High-Performance SC Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance SC Connector, UPC polish, single-mode, ceramic ferrule, UniCam High-Performance SC Connector, UPC polish, single-mode, ceramic ferrule, UniCam High-Performance SC Connector, APC polish, single-mode, ceramic ferrule, UniCam High-Performance SC Connector, APC polish, single-mode, ceramic ferrule, Note: Organizer packs are packs of 25 unassembled UniCam Connectors separated into components. PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE SPLICE CLOSURES TEST EQUIPMENT SPLICE EQUIPMENT TRAINING
6 ordering information (continued) Part Number Description ST Compatible Connectors X X-Z Z Z Z UniCam High-Performance ST Compatible Connector, 50 µm LOMMF*, ceramic ferrule, logo, single pack UniCam High-Performance ST Compatible Connector, 50 µm multimode, ceramic ferrule, logo, single pack UniCam High-Performance ST Compatible Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance ST Compatible Connector, 50 µm LOMMF*, ceramic ferrule, logo, organizer pack UniCam High-Performance ST Compatible Connector, 50 µm multimode, ceramic ferrule, logo, organizer pack UniCam High-Performance ST Compatible Connector, 62.5 µm multimode, ceramic ferrule, UniCam High-Performance ST Compatible Connector, UPC polish, single-mode, ceramic ferrule, UniCam High-Performance ST Compatible Connector, UPC polish, single-mode, ceramic ferrule, * LOMMF = Laser-optimized multimode fiber. Note: Organizer packs are packs of 25 unassembled UniCam Connectors separated into components. SPECIFICATION SHEET LAN-1220-EN PAGE 6
7 ordering information (continued) Part Number Tool Kits and Accessories TKT-UNICAM-PFC TKT-UNICAM FBC-007 HAN-TRACK HAN-UNI HAN-STANDARD FBC BLADE VFL-A125 VFL-A250 VFL-AKIT TER-CTS-LC TER-CTS-SC TER-CTS-ST VFL-350 TL-UC01 TL-UCP FCC-WIPES FCC-CLEANER-FIBER CLEANER-PORT-2.5 CLEANER-PORT-1.5 Description SPECIFICATION SHEET LAN-1220-EN PAGE 7 UniCam High-Performance Installation Tool Kit, includes UniCam Connector High-Performance Installation Tool, High-Performance Flat Cleaver and all required fiber preparation and cleaning supplies UniCam Connector Standard Installation Tool Kit, includes Score-and-Snap Cleaver, installation tool and all required fiber preparation and cleaning supplies and all the CTS adapters and patch cords needed for CTS installation (VFL-350 sold separately) High-Performance Cleaver, individual flat fiber cleaver Fiber Handler Track for use with double-sided fan-out and direct 250 µm fiber handler (FBC-007 cleaver only) Double-sided Fiber Handler for fan-out tubing and direct 250 µm fiber applications (FBC-007 cleaver only) Double-sided Fiber Handler for 900 µm buffered fiber and jacketed cable (FBC-007 cleaver only) Replacement Blade for the High-Performance Cleaver (FBC-007 and FBC-015) LC 1.25 mm Ferrule VFL Adapter (for TKT-UNICAM-PFC only) SC and ST Compatible 2.5 mm Ferrule VFL Adapter (for UniCam High-Performance Installation Tool only) Includes LC 1.25 mm and SC and ST Compatible 2.5 mm Ferrule Adapters (for UniCam High- Performance Installation Tool only) Continuity Test Set Adapter for LC connectors (TKT-UNICAM only) Continuity Test Set Adapter for SC connectors (TKT-UNICAM only) Continuity Test Set Adapter for ST Compatible connectors (TKT-UNICAM only) Visual Fault Locator, 635 nm pen-style light UniCam Connector Standard Tool Kit Installation Tool UniCam High-Performance Installation Tool Lint-free Cleaning Wipes, canister of 90 Fiber Optic Cleaning Fluid, 3 oz can Single-fiber Port Cleaner for SC and ST Compatible connectors Single-fiber Port Cleaner for LC connectors Note: Laser light: Do not view directly with optical instruments (magnifiers). Class 1M laser product. PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE SPLICE CLOSURES TEST EQUIPMENT SPLICE EQUIPMENT TRAINING
8 notes Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. LANscape and UniCam are registered trademarks of Corning Cable Systems Brands, Inc. ST is a registered trademark of Lucent Technologies. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. 2007, 2012 Corning Cable Systems. All rights reserved. Published in the USA. LAN-1220-EN / November 2012 SPECIFICATION SHEET LAN-1220-EN PAGE 8
Keyed LC Connector Solution
features and benefits Eight color-coded mechanical key positions Meets TIA/EIA-568-B requirements Keyed connectors and adapters Full solution availability Keyed LC Connectors Photo LAN758 SPECIFICATION
7.4 3M No Polish Connector
Cap Fibre Splice Element Description 3M No Polish Connector (NPC) enables fast, on-site installation of 250μm and 900μm connections utilizing a one piece, pre-assembled design. The SC compatible connector
Installation Guide for the TKT-UNICAM-PFC Tool Kit
Installation Guide for the TKT-UNICAM-PFC Tool Kit www.corning.com/cablesystems/unicam US and Canada: 1-800-743-2671 International: +1-828-901-5000 006-369 Issue 6 Corning Cable Systems LLC PO Box 489
Patch Cords for Data Center Applications
Applications General use of patch cords includes the interconnection of the optical fiber cable plant with opto-electronic equipment, and/or the cross-connection between cable plant segments. Pigtails
Field-Installable Fiber Optic Connector Tool Kits A LANscape Solutions Product
Description provide the craftsperson with a collection of essential tools required for tasks associated with the installation, maintenance and termination of fiber optic cable. The tools used in the kits
Cable Assemblies. A LANscape. Solutions Product
Corning Cable Systems offers the most complete line of connectors and factory-terminated cables, from single-fiber jumpers to high-fiber-count assemblies. As the industry s leading supplier of cable assemblies,
Cable Assemblies. Features and Benefits
Features and Benefits Flame-retardant jacket Rugged and durable Superior Performance Testing Every termination is tested to ensure the highest in network performance State-Of-The-Art Manufacturing Processes
Cable Assemblies. Corning Cable Systems
Corning Cable Systems OptiFit Node Assembly Photo CAPSS1721 Description As the industry s leading supplier of single-mode cable assemblies, Corning Cable Systems offers the most complete line of connectors
Cable Assemblies. Pretium EDGE Reverse Polarity Uniboots Photo LAN2217-2218. ST Compatible Ultra PC 12-Fiber Cable Assembly Photo LAN2784
Corning offers the most complete line of connectors and factory-terminated cables, from single-fiber jumpers to high-fiber-count assemblies. As the industry s leading supplier of cable assemblies, Corning
LANC Fibre Patch Panel Solution
features and benefits Modular front with interchangeable fibre optic adapter modules Quick mount feature (teardrop design) Port numbers printed above and below adapter modules High-density using LC connectivity
Belden. Optical Fiber Catalog. One Enterprise. One Infrastructure. One Partner. Belden IBDN FiberExpress Systems
Belden Optical Fiber Catalog One Enterprise. One Infrastructure. One Partner. Belden IBDN FiberExpress Systems With the IBDN FiberExpress Systems, Belden takes a complete approach to fiber optic cabling.
Guidelines. LANscape Solutions Recommended Fiber Optic Test Guidelines. Table of Contents. 1. Introduction. 2. Why Test? 1. Introduction...
LANscape Solutions Recommended Fiber Optic Test Guidelines Table of Contents 1. Introduction...1 2. Why Test?...1 3. Tier 1 and Tier 2 Testing...2 4. Encircled Flux...3 5. Link-Loss Budgets...4 6. Proper
12 Fibre MTP Jumper, MTP (non-pinned) to MTP (pinned)
1 1 9.41 115 0 Patch cables are used 143 12 Fibre MTP Jumper, MTP (non-pinned) to Patch cables are used for non -permanent connections between patch panels, transmission equipment, etc. Pre -assembled
Pretium EDGE HD Solutions
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Cable Systems Pretium EDGE HD Solutions create a fiber optic tip-to-tip solution for Data Centers and Storage Area
Installation Instructions for 1 and 2-fiber UniCam Connectors
Installation Instructions for 1 and 2-fiber UniCam Connectors SRP-006-150 Issue 4 Corning Cable Systems Fiber Cabling Solutions for Premises Networks Corning Cable Systems Corning Cable Systems LLC PO
SECURE Fiber Optic Products
SECURE Fiber Optic Products LC SECURE Fiber Optic Products (Pages 9 and 10) LC SECURE Connectors, Cable Assemblies and Adapters MPO SECURE Fiber Optic Products (Pages 11 and 12) MPO SECURE Cable Assemblies
Reliable, Consistent, Quality
Reliable, Consistent, Quality 1-877-320-3143 www.fibertronics.com Reliable, Consistent, Quality Welcome To Fibertronics Inc. Reliability, consistency, and quality is what we put behind every Fiber optic
Table of contents NEUTRIK AG 2
OpticalCon Field Repair Instruction Fiber Optic Connection System Neutrik AG Im alten Riet 143 9494 Schaan Liechtenstein 2006-08 NEUTRIK AG 1 Table of contents 1. OpticalCon Repair Options... 3 2. Cable
Polymer Coated Fiber Cable (PCF)
Polymer Coated Fiber Cable (PCF) Panduit has introduced a Polymer Coated Fiber (PCF) to their fiber cable offering available in 50µm and 62.5µm core diameters. Along with this cable having a stronger durability
Migration to 40/100G in the Data Center with OM3 and OM4 Optical Connectivity
Migration to 40/100G in the Data Center with OM3 and OM4 Optical Connectivity Needs in the Data Center With the continued requirement for expansion and growth in the data center, infrastructures must provide
3M Telecommunications Solutions for Networks. 3M Hot Melt Fibre Optic. Connectors, Kits and Accessories. Innovation
3M Telecommunications Solutions for Networks 3M Hot Melt Fibre Optic Connectors, Kits and Accessories Innovation 3M Hot Melt Connectors are among the most popular with contractors because of their reliability
Secure/Keyed LC System Solutions Overview
Secure/Keyed LC System Solutions Overview Designing performance and efficiency into your secure network Introduction In recent years, physically discrete fiber connection systems have emerged to respond
The Need for Speed Drives High-Density OM3/OM4 Optical Connectivity in the Data Center
The Need for Speed Drives High-Density OM3/OM4 Optical Connectivity in the Data Center Doug Coleman, Manager, Technology & Standards, Corning Cable Systems Optical connectivity with OM3/OM4 laser-optimized
CamSplice Assembly Manual
Corning Cable Systems SRP-006-038 Issue 9, September 2000 Page 1 of 6 CamSplice Assembly Manual Table of Contents 1. General... 1 2. Precautions... 1 3. Tools and Materials... 2 4. Cable and Fiber Preparation...
Plug & Play Universal Systems
Plug & Play Universal Systems A LANscape Pretium Plug & Play Universal Systems for Data Centers and Storage Area Networks (SANs) Corning Plug & Play universal systems create a fiber optic tip-to-tip solution
TIA Releases Guidelines for Maintaining Polarity Using Array Connectors
Corning Cable Systems TIA Releases Guidelines for Maintaining Polarity Using Array Connectors What is new? ANSI/TIA-568-B.1-7-2006 Commercial Building Telecommunications Cabling Standard, Part 1 General
BLINK Triple-Play Connector
An innovative optical connector tailored to residential requirements forms the basis of the HUBER+SUHNER Fiber In The Home portfolio. Increased protection against soiling of the connector end surfaces,
Corning Cable Systems CAH Connections SM Gold Program Tested and Trusted Cable Assembly Houses for High-Quality Products
Corning Cable Systems CAH Connections SM Gold Program Tested and Trusted Cable Assembly Houses for High-Quality Products The Corning Cable Systems CAH Connections SM Gold Program represents the highest
THE AMP NETCONNECT MT-RJ OPTICAL FIBER SYSTEM
THE AMP NETCONNECT MT-RJ OPTICAL FIBER SYSTEM The Most Significant Development In Fiber Optic Connectivity Is Now The Connectivity Choice For The Networks Of Today And Tomorrow 2 TABLE OF CONTENTS The
FCS-FCT-FCP Housings and Connector Panels. InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2
Product Family: Product: Fibre: LANscape Hardware Solutions FCS-FCT-FCP Housings and Connector Panels InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2 Applications Corning Cable
Cable Assembly Solutions at the Speed of Light
Cable Assembly Solutions at the Speed of Light Peggy Kovling ACI Founder Peggy Kovling credits her extensive knowledge of the cable business, along with her abilities in customer relationship management,
TIER-1/TIER-2 FIBER CERTIFICATION KITS
MaxTester 940 Fiber Certifier OLTS TIER-1/TIER-2 FIBER CERTIFICATION KITS EXFO s Fiber Certification kits cover all test requirements to perform clear, fast and first-time-right system acceptance. This
Data Center Design for 40/100G
Data Center Design for 40/100G With the continued requirement for expansion and scalability in the data center, infrastructures must provide reliability, manageability and flexibility. Deployment of an
As today s evolving data centers
IT CORNER Next Generation Optical Fiber Connectivity Solutions for the Mission Critical Data Center BY BILL CHARUK As today s evolving data centers confront bandwidth capacity challenges, the migration
Pretium Connector Housings
Pretium Connector Housings A LANscape Pretium Solutions Product Applications Main cross connect, intermediate cross connects and telecommunications rooms Rack or equipment cabinet installations Data center
SC, FC and ST * Hot Melt Fiber Optic Connectors
SC, FC and ST * Hot Melt Fiber Optic Connectors Instructions September 1998 78-8073-7873-8 2 Contents 1.0 Safety and Helpful Hints...4 2.0 Field Termination Kit Contents...4 3.0 STÑInstallation on 900
Fiber Optics in Harsh Environment Applications
Fiber Optics in Harsh Environment Applications Table of Contents Industrial Testing Comparisons 2 Fiber Optics in Harsh Environment Applications 3 Oil & Gas Products 4 Mining Products 6 Manufacturing 8
FOCONEC. Network Connectivity & Cabling Management. Overview: Features: Brighter Future
CORDS & CABLE ASSEMBLIES Standard Simplex/Duplex Patch Cords Overview: FOCONEC supplies full series of standard simplex, duplex patch cords or pigtails, designed for interconnection or cross connection
Types of Optic Cable andApplications
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 904 FIBER OPTIC CABLE AND COMPONENTS April 18, 2014 904.01 Fiber Optic Cable. Furnish loose-tube, single-mode, step-index dielectric
LANscape Solutions for Xcelerated Bandwidth Applications LANscape Xcelerate and Xcelerate Plus Solutions
Corning Cable Systems MIC and Unitized MIC Cable LAN322 2-Fiber Zipcord Cable CLT26 Rack-Mountable Closet Connector Housing LAN325 FREEDM Cable LAN01 UniCam MT-RJ, LC, SC Connectors LAN133, 237, 139 High-Density
Technical Bulletin. Guidelines For Testing And Troubleshooting Fiber Optic Installations
The Fiber Optic Association, Inc. 1119 S. Mission Road #355, Fallbrook, CA 92028 1-760-451-3655 Fax 1-781-207-2421 Email: info@thefoa.org http://www.thefoa.org Technical Bulletin Guidelines For Testing
Optical Fiber Data Center Field Testing. ANSI/BICSI 002-2011 Data Center Design and Implementation Best Practices
Optical Fiber Data Center Field Testing ANSI/BICSI 002-2011 Data Center Design and Implementation Best Practices Abstract Data Centers are a growing segment of the enterprise market. Regardless of whether
SINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS
Features: SINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS Low insertion loss < 0.2 db Excellent repeatability FC/PC, SC, ST, LC, MU, E2000 termination available Custom ferrule termination available Designed
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431. Visit us at www.testequipmentdepot.com
Datasheet: MultiFiber Pro First MPO tester to support both Singlemode and Multimode MPO fiber testing Data centers are growing, fueled by the proliferation of media, virtualization and the need for more
How To Use The Visifault Visual Fault Locator
VisiFault Visual Fault Locator Instruction Sheet The VisiFault Visual Fault Locator (VFL) is a visible light source that helps you trace optical fibers, check fiber continuity, and find faults such as
Corning Cable Systems Optical Cabling Solutions for Brocade
Corning Cable Systems Optical Cabling Solutions for Brocade Building high-density, high-port-count, structured cabling solutions to scale storage area networks to thousands of ports Contents Executive
The Corning Advantage
The Corning Advantage Industry Leader in Telecommunications Corning s experience, rich in cutting-edge fiber optic innovations, is world renowned. Corning Cable Systems offers the broadest range of tip-to-tip
DIAMOND AVIM Connector
DIAMOND AVIM Connector Fiber optic connector for space applications Dr. François CALOZ, accredited laboratory Frédéric TAUGWALDER, Engineering DIAMOND SA - OCT. 2005 - ATELIER CONNECTIQUE - CNES 1 Motivation
Fiber Optic Cable Assemblies. Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable
Fiber Optic Cable Assemblies Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable 1 Cable assemblies used in patch panels (Fiber Distribution Units) are an essential interface
Maintaining Proper Polarity for Modular Pre-terminated Fiber Systems. Rudolph A. Montgelas Fiber Optic Senior Product Manager Ortronics/Legrand
Maintaining Proper Polarity for Modular Pre-terminated Fiber Systems Rudolph A Montgelas Fiber Optic Senior Product Manager Ortronics/Legrand November, 006 Introduction: Optical communication systems provide
Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications
Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output
Enterprise Networks. Core Products FOR. Local Area Networks. Data Centers AND
Enterprise Networks FOR Local Area Networks AND Data Centers Customer Care Bill-of-Materials Tool Training Services A Solution in itself Creating solutions, products and resources that fit together, are
Items Supplied. Frequency. Designation Description / Delivery Unit Order Number
Fiber Optic Cleaver D6 For Single- and Multimode Fibers Diamond blade for highest cleave quality and long life (typically > 10,000 cleaves) Fiber cleave length: 3.5 to 15 mm Fiber diameter: 125 µm nominal
hot products guide people. passion. expertise. gocsc.com
hot products guide gocsc.com who is CSC? Founded in 1972, Communications Supply Corporation (CSC), a subsidiary of WESCO International, Inc. (NYSE: WCC) distributes a full range of IP infrastructure and
TEST & INSPECTION. Featured Data Center Products. OTDRs Certification Test Kits Inspection Cleaning
TEST & INSPECTION Featured Data Center Products M310 Enterprise OTDR with TruEvent Technology Designed for Enterprise Network Testing, Troubleshooting and Documentation, the M310 with TruEvent technology
Managing High-Density Fiber in the Data Center: Three Real-World Case Studies
Managing High-Density Fiber in the Data Center: Three Real-World Case Studies CHALLENGE In today s data center, fiber optic links have become more vital than ever for transmitting data to and from a large
Field Installable Optical Connector for Cables
Field Installable Optical Connector for Cables Daigo Saito 1, Kazuhiro Takizawa 1, Kazuya Ogata 1, and Tan Khee Yen Serin 2 With the rapid expansion of fiber to the home (FTTH) in Japan, mechanical splices
Procedure for Cutting and Respooling Fiber Optic Cable
Table of Contents 1. GENERAL 1.1 Improper use of a respooler (Figure 1) can cause damage to a cable jacket or result in wavy fiber in tight buffered cables due to cable crossovers or excessive tensile
AMPTRAC TM CONNECTIVITY MANAGEMENT SYSTEM
AMP NETCONNECT TM AMPTRAC TM CONNECTIVITY MANAGEMENT SYSTEM The AMPTRAC Connectivity Management System turns cabling systems and their connected devices into intelligent networks by reducing costly and
White Paper: 10GbE Fiber A Practical Understanding and Functional Approach
White Paper: 10GbE Fiber A Practical Understanding and Functional Approach Dennis Manes, RCDD Senior Applications Engineer Leviton Network Solutions E/8 #2509 Table of Contents Introduction 3 Types of
NetScanner System. Toronto: 416 754 7008, Montreal: 514 695 5147, Toll Free:1888 754 7008, Email: sales@a-tech.ca; www.a-tech.ca
Networking Solutions NetScanner System 9IFC/90DB/90DC FEATURES Ethernet Interface for NetScanner System Modules Provides Power and Hardware Trigger Interface 10/100 Base-T Auto-Negotiating Universal AC
Arista 40G Cabling and Transceivers: Q&A
Arista 40G Cabling and Transceivers: Q&A 40G Cabling Technical Q&A Document 40Gigabit Cables and Transceivers Q. What 40G cables and transceivers are available from Arista? A. Arista supports a full range
Termination Procedure. FCUPC One Piece Connector
Termination Procedure (3mm/2.4mm/2mm/1.6mm) Issued By: Engineering Dept. Reviewed By: P.N. Approved By: T.M. SENKO Advanced Components, Inc. 225 Cedar Hill Street, Marlboro, MA 01752, USA Toll-free: +1-888-32-SENKO
LANscape Pretium EDGE Solutions A LANscape Pretium Solutions Product
Pretium EDGE High-Density Housings Photo LAN4080 Page 1 Revision date 2013-12-09 Pretium EDGE Solutions Introduction Data centre operators have an exhaustive list of desirable parameters in order to ensure
Fibre optic testing best practices
Fibre optic testing best practices Adrian Young Senior Technical Support Engineer Fluke Networks November 2011 Singapore Inspecting and cleaning Keeping the output port on your test equipment clean is
M310 Enterprise OTDR. Designed for Enterprise Network Testing, Troubleshooting and Documentation. www.aflglobal.com or (800) 321-5298, (603) 528-7780
Designed for Enterprise Network Testing, Troubleshooting and Documentation Features Integrated Optical Power Meter and Visual Fault Locator Short dead zones provide testing of closely spaced events Industry
Fiber Optics: Fiber Preparation and Fiber Connectors
Photonics Technical Note # 20 Fiber Optics Fiber Optics: Fiber Preparation and Fiber Connectors Fiber optics are used for a variety of applications in the photonics industry. Different applications require
CISCO 10GBASE X2 MODULES
DATA SHEET CISCO 10GBASE X2 MODULES Figure 1. Cisco 10GBASE X2 and Xenpak Module PRODUCT OVERVIEW The Cisco 10GBASE X2 modules (Figure 1) offers customers a wide variety of 10 Gigabit Ethernet connectivity
Guide to Patch Cords. and Pigtails. www.fibrefab.co
Guide to Patch Cords and Pigtails www.fibrefab.co Established in 1992, FibreFab is a leading provider of fibre optic connectivity products used in data communications and telecommunication networks. The
Loss & Continuity Testing with MPO/ MTP Connectors
Loss & Continuity Testing with MPO/ MTP Connectors Deployments of fiber optic systems in data centres are now using multimode ribbon fiber and typically MPO/MTP connectors, which have some very particular
Din spindel i nätet! Passive Components Menu. QDOC Passive Components. www.qdoc.se. Connector: FC SC ST LC.. Patch cord: FC-FC SC-SC ST-ST LC-LC..
Passive Components Menu Connector: FC SC ST LC.. Patch cord: FC-FC SC-SC ST-ST LC-LC.. Adapter: FC SC ST LC Attenuator: FC SC ST LC PLC/WDM/Splitter: PLC WDM Splitter Passive Components Connector Passive
1U Multi-Function Fibre Enclosure
FEATURES AND SPECIFICATIONS Features and Benefits The is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination
BLACK BOX. Secure network ports from unauthorized access and accidental disconnects.
FC black process black LockPORT Security Patch Cables CAT5e, CAT6 and Fibre 5th black Secure network ports from unauthorized access and accidental disconnects. BLACK BOX» LockPORT cables stay locked in
MDU SC Connector Termination Procedure
MDU SC Connector Termination Procedure Series: 718-NANN-NNNNN B Update the stripping length 11/24/09 A Initial Release 4/30/09 Version Revision History Summary Issue Date I INTRODUCTION This document describes
FOA Technical Bulletin. Guide To Fiber Optic Installation
The Fiber Optic Association, Inc. 1119 S. Mission Road #355, Fallbrook, CA 92028 1-760-451-3655 Fax 1-781-207-2421 Email: info@thefoa.org http://www.thefoa.org FOA Technical Bulletin Guide To Fiber Optic
Poligono Industrial La Esprilla Nave A-11. Igollo de Camargo. 39608. Cantabria. España Telefono : 942037171 /// e-mail: info@j-tec.
Poligono Industrial La Esprilla Nave A-11. Igollo de Camargo. 39608. Cantabria. España Telefono : 942037171 /// e-mail: info@j-tec.org IMPORTACIONES - EXPORTACIONES - VENTA MAYORISTA Fiber Optic / MULTIMODE
Fiber Solutions Catalog
Fiber Solutions Catalog BELDEN IBDN FIBEREXPRESS SYSTEMS, CABLE AND CONNECTIVITY PRODUCTS The cable plant is the foundation of the entire network It s like building a house. If you scrimp on the foundation,
Cisco SFP Optics for Gigabit Ethernet Applications
Cisco SFP Optics for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit
Removing the Mystery from OTDR Measurements. Keith Foord Product Manager Greenlee Communications
Removing the Mystery from OTDR Measurements Keith Foord Product Manager Greenlee Communications Why an OTDR? Terminology Theory Standards Key specifications Trade-offs Cleaning and Inspection Measurements
Table of Contents. Fiber Trunking 2. Copper Trunking 5. H-Series Enclosures 6. H-Series Mods/Adapter Panels 7. RSD Enclosures 8
Data Center Guide 1 Our Philosophy As a leader in the enterprise cable industry since our inception over three decades ago, we can help you implement the solution that will work best for your cabling infrastructure,
Reasons for reissue are in Section 6, REVISION SUMMARY.
Figure 1 This instruction sheet covers the application of OPTIMATE FSMA Fiber Optic Connector Types 905 and 906 for data and telecommunications applications. Base part numbers which apply to each type
The color scheme for the fibers in the cable complies with the Telcordia (formerly Bellcore) specification.
10 Cables The cables referred to below are provided with standard single- and multimode fibers. Other commercially available fibers can be provided on request. The bare fibers are colored in all cases
Best Practices for Ensuring Fiber Optic System Performance. David Zambrano
Best Practices for Ensuring Fiber Optic System Performance David Zambrano Inspect Before You Connect Optical Connectors in our Networks Contamination and Signal Performance Sources of Contamination Process
Plug - Type (Male/Female) Attenuators CAA series Singlemode
Plug - Type (Male/Female) Attenuators CAA series Singlemode Description: The plug-type singlemode attenuators are used directly on the ends of fiber optic jumpers prior to installation in adapters. These
CORNING CABLE SYSTEMS GENERIC SPECIFICATION FOR TIGHT BUFFER OPTICAL FIBER CABLES FOR INTER- AND INTRABUILDING APPLICATIONS.
CORNING CABLE SYSTEMS GENERIC SPECIFICATION FOR TIGHT BUFFER OPTICAL FIBER CABLES FOR INTER- AND INTRABUILDING APPLICATIONS September 2006 Revision 7 Corning Cable Systems reserves the right to update
Enterprise Networks EMEA. Core Products. Local Area Networks. for. Spring
Enterprise Networks EMEA Core Products Local Area Networks for Spring 2014 LAN Core Products 2 Get it Right, Right Now. You need assurance that the cabling products you use in Local Area Networks on a
This sale agreement is between (buyer) and William Graham (seller) of Mississauga Training Consultants. Authored by: William Graham, Owner
Mississauga Training Consultants 6117 Clover Ridge Crescent, Mississauga, Ontario, Canada, L5N 7B2 - Tel: 905-785-8012 mrfiber@canada.com www.fiberoptictraining.com Purchase Agreement This sale agreement
Discontinued. Volition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125
M310 Data Center OTDR
Designed for Data Center Testing, Troubleshooting and Documentation Features Event Dead Zone 0.8 m Attenuation Dead Zone
ETD Fiber Optic Products
ETD Fiber Optic Products ETD manufactures and supplies a wide range of passive fiber optic components and solutions for the European Data, Telecom and FTTX environment. ETD has worked in the Fiber Optic
Four Ways To Test Installed Fiber Optic Cables And How The Results Will Differ With Each Method
Four Ways To Test Installed Fiber Optic Cables And How The Results Will Differ With Each Method Jim Hayes, VDV Works, LLC Abstract: We often are asked questions about testing installed fiber optic cables
Discover Perfectly Clean, Perfectly Fast, Perfectly Reliable Fiber Optic Networks
Discover Perfectly Clean, Perfectly Fast, Perfectly Reliable Fiber Optic Networks Sticklers Fiber Optic Cleaning Kits Available with up to 2300+ cleanings per kit Everything you need for fast, reliable
Fiber Optic. Passive Components Edition 2009
Fiber Optic Passive Components Edition 2009 Reliably connected to your network Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems for electrical
4RU High Density Shelf Installation Instructions
4RU High Density Shelf Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Tools Required... 3.0 Package Contents... 4.0 Installing the Product Unpacking...
Corning Cable Systems Optical Cabling Solutions for Brocade
Corning Cable Systems Optical Cabling Solutions for Brocade Building high-density, high-port-count, structured cabling solutions to scale Storage Area Networks (SANs) to thousands of ports. CONTENTS Executive
ADC-APC Integrated Cisco Data Center Solutions
Advanced Infrastructure Solution for Cisco Data Center 3.0 Ordering Guide ADC-APC Integrated Cisco Data Center Solutions The evolution of data centers is happening before our eyes. This is due to the
Kit Highlights and Key Features
AF-OLK6 Series Fiber Optic Test kit (Data Storage Kit) Product: OLK6 Series Date: Aug:2007 Rev: 01 Description The AF-OLK6 series test kits are the complete solution necessary for the installer to test,
APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL
APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL ROV & AUV PRODUCTS GRE (Glass Reinforced Epoxy) CS-MS 55 & 66 SERIES MINI-CON HUMMER GLOBE-CON ALL-WET
Field-Installable Fusion Splice-on Connector
Economical Solution for Integrated Fiber Preparation Tool Demand. Field-Installable Fusion Splice-on Connector More Cost-effective than Mechanical Connector in All Aspects PCT/KR2010/65973 The solution
Fiber Optic Cordage. Interconnect A Furukawa Company. Product Description. Why OFS Interconnect Cordage?
Fiber Optic Cordage Interconnect A Furukawa Company Durable, Flexible Cordage Surpasses Industry Strength Standards for Interconnect Cables Product Description OFS Fiber Optic Interconnect Cordage offers