UNLOCKING TECHNOLOGY IVECO

PPLICTIONS IVECO - DS136 1234 PRO D100 29L 10, 11, 12, 14 05 35S 10, 11, 12, 13, 14, 17 05 35C 10, 11, 12, 13, 14, 17 05 40C 10, 11, 12, 13 05 45C 10, 13 05 50C 11, 13, 14, 17 05 60C 15 05 65C 15, 17 05 IVECO CN - DS177 1234 PRO D100 ECO 06 Euro 4 06 Euro 5 EEV DC250 N/ DC250 N/ 3 Version: 2.3 July 2011 Copyright 2009

GENERL OPERTION The immobiliser system fitted to the Iveco Daily provides theft protection using the ignition key and transponder device with a rolling code. There is an immobiliser symbol on the dashboard that indicates the status of the immobiliser. The system consists of an aerial fitted around the ignition barrel, an immobiliser ECU and a separate remote (plip) ECU. The keys and remotes have to be programmed separately as they are controlled by individual ECU s. IMPORTNT: Both the immobiliser ECU and remote ECU normally have the same security code. However if either one of the ECU s has been replaced then it is possible that they haven t both been re-programmed with the same security code, in these cases two separate security codes will be required. 5 Version: 2.3 July 2011 Copyright 2009

PROGRM KEYS IVECO - >2005 + FIT + GENERL MOTORS + HOND + HYUNDI + IVECO + JEEP PROGRM KEYS KEYS PROGRMMED NOTE : IF THE KEY USED IS LREDY PROGRMMED THE EDC INJECTOR SYMBOL ND IMMO WRNING LIGHT WILL GO OUT 3 SECONDS FTER IGNITION IS SWITCHED ON. IF KEY IS UNPROGRMMED THEN IMMO LIGHT WILL FLSH SLOWLY ND EDC LIGHT QUICKLY + CHSSI CB + VN WRNING KEYS NOT VILBLE WILL BE DELETED CONTINUE YES = ENTER NO = BCK PLESE ENTER NO. OF OLD KEYS TO PROGRM IMMOBILISER REMOTE FUNCTIONS NOTE : USE GENUINE KEYS ONLY NOTE 2 : NY KEYS NOT VILBLE WILL BE DELETED, ND WILL NEED TO BE PROGRMMED LTER. NOTE 3 : KEYS MUST BE VRIGIN, ND RE 1 TIME PROGRM ONLY ENTER NUMBER OF OLD KEYS REQUIRED. THIS LLOWS DELETED KEYS TO BE RE- PROGRMMED. IF YOU DON T WNT TO RE-PROGRM OLD KEYS (IE STOLEN) THEN ENTER 0 SWITCH IGNITION OFF NUMBER OF OLD KEYS ECU IDENTIFICTION PROGRMMING WEB SECURITY KEYS IVECO IMMOBILISER HRDWRE V X.X SOFTWRE X.X PRODUCTION X.X PLESE ENTER NO. OF NEW KEYS TO PROGRM ECU IDENTIFICTION FULT CODES X KEYS STORED MX 3/ MIN 2 KEYS PROGRM VILBLE OLD KEY FIRST CONTINUE YES=ENTER NO=BCK NUMBER OF NEW KEYS 6 Version: 2.3 July 2011 Copyright 2009

IVECO - >2005 IF TOTL NUMBER OF OLD KEYS ENTERED IS >3, THEN YOU WILL BE DVISED THT TOO MNY KEYS HVE BEEN SELECTED. YOU WILL BE SKED TO RE-ENTER THE NUMBER OF OLD & NEW KEYS GIN PLESE WIT UP TO MINUTE T THIS STGE THE EDC SYMBOL WILL FLSH (IF NEW KEYS RE PROGRMMED). IMMOBILISER SYMBOL EXTINGUISHES TOO MNY KEYS SELECTED IGNITION OFF SWITCH IGNITION OFF X OLD KEYS X NEW KEYS IS THIS CORRECT? ENTER THE SECOND KEY IN THE IGNITION TO BE PROGRMMED. THIS IS REPETED FOR THE NUMBER OF KEYS TO BE PROGRMMED YES=ENTER NO=BCK ENTER 5 DIGIT NUMERIC (SME CODE FOR REMOTES) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HS BEEN CHNGED, ENSURE THE CODES RE STILL THE SME, FROM THE DELER. IF NOT THEN TWO SEPRTE CODES RE REQUIRED. ENTER KEY #2 FINISHED NOTE : EDC ND IMMO LIGHTS SHOULD STOP FLSHING T THIS POINT. FINISHED 22BC IS CODE CORRECT? X KEYS STORED 7 Version: 2.3 July 2011 Copyright 2009

IVECO - >2005 + FIT + GENERL MOTORS + HOND + HYUNDI + IVECO + JEEP REMOTES PROGRMMED ENTER 5 DIGIT NUMERIC (SME CODE FOR REMOTES) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HS BEEN CHNGED, ENSURE THE CODES RE STILL THE SME, FROM THE DELER. IF NOT THEN TWO SEPRTE CODES RE REQUIRED. + CHSSI CB + VN PROGRMMING REMOTES WRNING REMOTES NOT VILBLE WILL BE DELETED CONTINUE YES = ENTER NO = BCK IMMOBILISER REMOTE FUNCTIONS NOTE : NY REMOTES NOT VILBLE WILL BE DELETED, ND WILL NEED TO BE PROGRMMED LTER. 22BC IS CODE CORRECT? PROGRMMING REMOTES PROGRMMING REMOTES PLESE ENTER NO. OF REMOTES TO PROGRM MX 3 REMOTES CCESS GINED ECU IDENTIFICTION IVECO REMOTES HRDWRE RELESE WK : XX HRDWRE RELESE VR : XX SOFTWRE RELESE WK : XX SOFTWRE RELESE VR : XX NUMBER OF REMOTES PROGRMMING REMOTES WITHIN 30 SEC PRESS REMOTE 1 ECU IDENTIFICTION FULT CODES PROGRMMING REMOTES X REMOTE/S IS THIS CORRECT? FTER PRESSING ENTER, IF MORE REMOTES WERE REQUESTED THEN THE SCREEN WILL PROMPT YOU TH PRESS REMOTE 2 & 3. YES=ENTER NO=BCK 9 Version: 2.3 July 2011 Copyright 2009

IVECO - >2005 REMOTES PROG PROGRMMING REMOTES X REMOTES STORED REMOTES PROGRMMED FOLLOW THE INSTRUCTIONS ON THE SCREEN. TURN IGNITION OFF / ON / OFF (LLOW 3 SECONDS T ECH STGE) DISPLYS THE NUMBER OF REMOTES STORED. REMOVE THE KEY. TEST ECH REMOTE PROGRMMING REMOTES REMOTES STORED IGNITION OFF /ON / OFF REMOVE KEY TEST REMOTE OPERTION REMOTES STORED: X FINISHED 10 Version: 2.3 July 2011 Copyright 2009

PROGRM KEYS IVECO - 2006 > + FIT + GENERL MOTORS + HOND + HYUNDI + IVECO + JEEP ECU IDENTIFICTION FULT CODES _ IMMOBILISER REMOTES PROGRM KEYS 22BC IS CODE CORRECT? + + EUROCRGO + EUROTRKKER + STRLIS + EUROFIRE IMPORTNT ORIGINL KEYS NEED TO BE PROGRMMED IN DURING THIS PROCEDURE. IF THEY RE NOT PROGRMMED IN T THIS STGE THEY WILL BE PERMNENTLY DELETED NUMBER OF KEYS _ -> 2005 2006 -> WRNING LL KEYS WILL NUMBER OF KEYS 2 BE CLERED CONTINUE YES = ENTER NO = BCK NOTE : USE GENUINE KEYS ONLY NOTE 2 : NY KEYS NOT VILBLE WILL BE PERMNENTLY DELETED, NOTE 3 : KEYS MUST BE VRIGIN, ND RE 1 TIME PROGRM ONLY INSERT KEY TO PROGRM ECU IDENTIFICTION VIN: XXXXXXXXXXXXXXXXX WRNING PREVIOUSLY PROGRMMED KEYS NOT PROGRMMED DURING THIS PROCEDURE WILL BE PERMNETLY DELETED CONTINUE = ENTER EXIT = BCK INSERT NEXT KEY 11 Version: 2.3 July 2011 Copyright 2009

IVECO - 2006 > PROGRM KEYS SWITCH IGNITION OFF REMOTES PROGRMMED WHEN REQUESTED TO DO SO PRESS ND HOLD THE UNLOCK BUTTON ON ECH REMOTE. CTION MUST BE COMPLETE WITHIN 5 SEC. CONTINUE? PLESE WIT 25 SEC ******* PRESS ND HOLD UNLOCK BUTTON ON THE FIRST REMOTE WRNING PREVIOUSLY PROGRMMED REMOTES NOT PROGRMMED DURING THIS PROCEDURE WILL BE PERMNTELY DISBLED CONTINUE? REMOTES PROGRMMED: 1 DO YOU WNT TO PROGRM MORE REMOTES? PROCEDURE COMPLETE ENTER 5 DIGIT NUMERIC (SME CODE FOR KEYS) NOTE: IF THE IMMOBILISER ECU (DIFFERENT TO REMOTE ECU) HS BEEN CHNGED, ENSURE THE CODES RE STILL THE SME, FROM THE DELER. IF NOT THEN TWO SEPRTE CODES RE REQUIRED. PRESS ND HOLD UNLOCK BUTTON ON THE NEXT REMOTE REMOTES PROGRMMED: 2 DO YOU WNT TO PROGRM MORE REMOTES? 22BC IS CODE CORRECT? PROCEDURE COMPLETE REMOTES PROGRMMED: 2 12 Version: 2.3 July 2011 Copyright 2009

TIPS & HINTS 1. Both the immobiliser ECU and remote ECU normally have the same security code. However if either one of the ECU s has been replaced then it is possible that they haven t both been re-programmed with the same security code, in these cases two separate security codes will be required. 2. Use genuine keys only. 3. Once programmed they can only be re-programmed to the same vehicle. 4. ll programmed keys or remotes will be deleted when programming. If required, they must be re-programmed in during the programming sequence 13 Version: 2.3 July 2011 Copyright 2009